Related
https://www.youtube.com/watch?v=btkMBoDytt8
Took me 2 weeks to get it but I only paid $3 and it has the 2.5D curve.
won't fit properly like the other tempered glass protectors
Kawaisa said:
won't fit properly like the other tempered glass protectors
Click to expand...
Click to collapse
How do you know? I've purchased a few cheap tempered glass ones for the Note 2, Note 3, S4 and S5. They all fit perfectly.
Is it because of the curve on the actual phone screen?
seoulbrova said:
How do you know? I've purchased a few cheap tempered glass ones for the Note 2, Note 3, S4 and S5. They all fit perfectly.
Is it because of the curve on the actual phone screen?
Click to expand...
Click to collapse
Yup, refer to the tempered glass thread, no luck so far with any of them
previous notes had completely flat screens, I wish they kept it that way
Kawaisa said:
Yup, refer to the tempered glass thread, no luck so far with any of them
Click to expand...
Click to collapse
Are there any non glass that will fit properly? Like the spigen one?
http://www.amazon.com/dp/B00MAWRZ36...olid=14PZJ1FUHQDK5&coliid=ICQ4XMH16FFFD&psc=1
Piercing Heavens said:
Are there any non glass that will fit properly? Like the spigen one?
http://www.amazon.com/dp/B00MAWRZ36...olid=14PZJ1FUHQDK5&coliid=ICQ4XMH16FFFD&psc=1
Click to expand...
Click to collapse
not sure, no one has posted photos
Someone just posted a photo of their Spigen glass and that one looks alright(not perfect) that one is smaller that the other glass protectors to avoid the issue but it's still not perfect.
I think the last Samsung phone with a curved screen was the S3 and I don't think any manufacturer ever offered either a tempered glass or a film protector that covered the entire screen because they could not get a proper fit.
Are there any curved/wet install screen protectors that will fit round the curved edges of the S6 or is a glass one the way forward?
I am clumsy and outdoors lots so would want some proection and it seems a lot of the plastic protectors only just about cover the screen.
I was very satisfied with the Spigen non-glass screen protector. It covered almost all of the screen, which surprised me. I only took it off because I prefer glass protectors.
Spigen screen protectors leave gaps around the border. Not as much as glass sp. This is to accommodate "case friendly" design.
HKSpeed said:
I was very satisfied with the Spigen non-glass screen protector. It covered almost all of the screen, which surprised me. I only took it off because I prefer glass protectors.
Click to expand...
Click to collapse
Interesting! I thought I read it only just covered the screen? Does it overlap slightly? Maybe it was earlier version!
JayX2A said:
Interesting! I thought I read it only just covered the screen? Does it overlap slightly? Maybe it was earlier version!
Click to expand...
Click to collapse
No screen protector I know of covers more than the screen. Are you using a case? If yes, which one?
HKSpeed said:
No screen protector I know of covers more than the screen. Are you using a case? If yes, which one?
Click to expand...
Click to collapse
Not got the phone yet - was pre ordering bits! I don't mean the whole front of the phone. On the spigen website it shows the protector being slightly wider than the display, but review I read elsewhere seem to have it cut quite narrow and it barely covers the active part of the screen.
This is the Spigen plastic screen protector I ordered below. I always use a case and it covers most of the screen. There's a tiny gap, but I wasn't bothered by it.
http://www.amazon.com/gp/product/B00QU4N0EI
A case option is the Spigen Ultra Hybrid FX case. Its the $17.99 option in the link below. It covers the entire phone (front, back, edges). Then you don't need a screen protector.
http://www.amazon.com/gp/product/B00QU4PN84
Reviews and photos of it: http://www.amazon.com/gp/customer-reviews/RT1Z3ENHAIQ8Z and http://www.amazon.com/gp/review/RDXA8F1JMNCI4
Below is a review of the case for an iPhone 6. It's in Japanese, but you get the idea. There's no S6 video review available.
Despite my comments in this thread, I'm not a Spigen fanboy LOL. I no longer use the Spigen screen protector (I have a no-name glass now) and I'm swapping my Spigen case for a Ringke Fusion.
HKSpeed said:
This is the Spigen plastic screen protector I ordered below. I always use a case and it covers most of the screen. There's a tiny gap, but I wasn't bothered by it.
http://www.amazon.com/gp/product/B00QU4N0EI
A case option is the Spigen Ultra Hybrid FX case. Its the $17.99 option in the link below. It covers the entire phone (front, back, edges). Then you don't need a screen protector.
http://www.amazon.com/gp/product/B00QU4PN84
Reviews and photos of it: http://www.amazon.com/gp/customer-reviews/RT1Z3ENHAIQ8Z and http://www.amazon.com/gp/review/RDXA8F1JMNCI4
Below is a review of the case for an iPhone 6. It's in Japanese, but you get the idea. There's no S6 video review available.
Despite my comments in this thread, I'm not a Spigen fanboy LOL. I no longer use the Spigen screen protector (I have a no-name glass now) and I'm swapping my Spigen case for a Ringke Fusion.
Click to expand...
Click to collapse
Have the Fusion on my Nexus - pretty good but teh back is coming away from the sides now. Like the look of the Rinke slim though.
Got some Spigen ones, they are pretty close to the size of the screen. Have to be so careful to line it up properly! Shame they didnt make it that fraction bigger, but I guess that was not possible due to the screen curve.
Ordered spiegen ones too, from amazon, 2 protectors wtih shipping costed 16.70€ but i have always dreamed of getting rid of that thick and heavy tempered protector.... they really do add weight and thickness to phone, especially if you decide to put front and back tempered protectors
Duzzy5 said:
Ordered spiegen ones too, from amazon, 2 protectors wtih shipping costed 16.70€ but i have always dreamed of getting rid of that thick and heavy tempered protector.... they really do add weight and thickness to phone, especially if you decide to put front and back tempered protectors
Click to expand...
Click to collapse
I was tryiing to find a 0.2mm glass one as the thread on here has that as the best one - but they donn't ship to UK
They're hard to find, I've seen a few on ebay.com but there are some glass protectors that will cover almost all of the phone. They're the ones that go over the buttons with a pass-through for the fingerprint sensor/home button. They have an entirely identical full front look. Like this one, but not edge of course, they make them for flat S6s too but the flat ones being the ones that are hard to find: http://www.ebay.com/itm/Samsung-Gal...hash=item4d3e1f582c:m:mF-rpmie8VK2iab6MR9K5EQ
benjmiester said:
They're hard to find, I've seen a few on ebay.com but there are some glass protectors that will cover almost all of the phone. They're the ones that go over the buttons with a pass-through for the fingerprint sensor/home button. They have an entirely identical full front look. Like this one, but not edge of course, they make them for flat S6s too but the flat ones being the ones that are hard to find: http://www.ebay.com/itm/Samsung-Gal...hash=item4d3e1f582c:m:mF-rpmie8VK2iab6MR9K5EQ
Click to expand...
Click to collapse
Ordered a couple of super cheap 0.26mm ones that I found online.
https://www.replacebase.co.uk/samsu...or-0-2mm-ultra-clear-with-oleophobic-coating/
Arrived yesterday and look ok - will see how they go on and if there are any halo issues.
JayX2A said:
I was tryiing to find a 0.2mm glass one as the thread on here has that as the best one - but they donn't ship to UK
Click to expand...
Click to collapse
I have a SUPER thin tempered glass screen protector for the front and back of my s6. On the back it is quite large so it has the halo but on the front it is cut so it just about covers the actual display bit, so there is no halo on the front. It covers the samsung logo at the top and the capacitive buttons at the bottom like any other screen protector. Both costs me £2.49 on eBay UK. After using a much thicker tempered glass screen protector on my s3 I would say that the thicker ones feel as if they would offer better drop protection.
These are German made hybrid screen protectors made of anti-shock plastic substrate and tempered glass. Have used them on a few other devices and they are excellent. Slightly pricey as they are German made but definitely worth checking out. Just ordered mine today. They also include a protector for the back in the package.
http://www.ebay.com/itm/332032300020?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
As of now, I've ordered a few screen protectors, the full coverage ones found on ebay, which seems to affect touch functionality and the cheaper standard tempered glass protectors.
Waiting for the FX Glass protectors to arrive. Will update when I receive it.
Do let me know when anyone already has these.
I ordered a "full cover" one with the black border. (https://www.amazon.com/gp/product/B01MQLV04B)
I does not look promising. Reviews say its only sticky around the edges, so sensitivity is an issue.
I can't understand why there are no standard style protectors available.
That hybrid one looks closest to them, and seems promising.
THINK this is just another ordinary "not full coverage" glass.
Constrabus said:
I ordered a "full cover" one with the black border. (https://www.amazon.com/gp/product/B01MQLV04B)
I does not look promising. Reviews say its only sticky around the edges, so sensitivity is an issue.
I can't understand why there are no standard style protectors available.
That hybrid one looks closest to them, and seems promising.
Click to expand...
Click to collapse
The hybrid as the name suggests is a hybrid between plastic and glass. This makes the film as flexible as a plastic film but the layer which you touch is glass, hence very high resistance to scratches. They claim 8H and I have bought their protector for another device earlier and I can say from experience that its great! And its German made! And apparently they have very positive reviews everywhere. I just happened to know about them recently, maybe because I used to buy those cheap 3-4dollar tempered glass films from China which would do the job and were usually as good as the more expensive ones for "flat" displays.
I still haven't received any of the screen protectors I've ordered for the mix. But from what users are saying on this forum, the full-coverage version with the black borders are pretty much unusable due to poor touch. And the regular tempered glass ones cover just the viewing area. But I guess this is already a very well known fact that its hard to find full coverage tempered glass protectors for 2.5D curved displays. Almost every screen protector which promise full coverage only has adhesives around those borders and the glass barely touches the display which causes a significant loss in touch functionality.
Even the Atfolix protector only covers the viewing area. But what makes them different from the cheap regular tempered glass is resistance to shock. Most regular tempered glass protectors crack during shock. But these being hybrids are more resistant to shocks.
satishp said:
Even the Atfolix protector only covers the viewing area.
Click to expand...
Click to collapse
What does that mean?
It doesn't cover the bottom camera bezel?
ChodTheWacko said:
What does that mean?
It doesn't cover the bottom camera bezel?
Click to expand...
Click to collapse
As far as what I've read, it covers the bezel around the camera. But the protector is cut slightly smaller than the display glass meaning its not a full-coverage type protector. This is most likely done to ensure that the protector adheres properly to the 2.5D display glass.
So it does cover the bezel area but doesn't reach the rounded edges of the display. Hope this helps.
I have received a case and screen protector today and have uploaded pictures here. Have more cases coming in and will update as I receive them.
Hope you can also help by posting photos of the case and screen protector you are using in that thread. It will help other buyers.
Cheers!
@satishp Any updates with that screen cover?
Constrabus said:
@satishp Any updates with that screen cover?
Click to expand...
Click to collapse
Haven't received them yet. They shipped it via a slow shipping service called PostNL.
I can recommend this full coverage protector I got from ebay though.
No newton rings, no issues with touch and its a perfect fit.
Ebay Item: 172369729447
This is based on my own experience with the item. As long as you perfectly install the protector, you shouldn't have any issues at all.
I have already posted photos here with the protector applied. Check it out.
I wonder why isn't there a full screen glass cover for the mix. The screen is curve at the edges but manufacturers should be able to do this right?
jaime4272 said:
I wonder why isn't there a full screen glass cover for the mix. The screen is curve at the edges but manufacturers should be able to do this right?
Click to expand...
Click to collapse
There are full coverage protectors like the one I've recommended above. If you're referring to fully transparent full coverage protectors, I guess they dont make them because it shows those air gaps around the borders when applied to a 2.5D curved display like the one on the Mix. The ones with the black borders dont show this and are preferred by most users. Its better than seeing those ugly air gaps which arent uniform.
I did try that one you are referring to but I had to return it because of the rainbow effect and touch issues. ho well.
jaime4272 said:
I did try that one you are referring to but I had to return it because of the rainbow effect and touch issues. ho well.
Click to expand...
Click to collapse
I guess there are a few variants of the screen protector coming from different factories. This is why I specifically mentioned the Ebay Item ID. I do not get any issues with this one. I ordered two of them. Had to dispose off one as I noticed some stubborn dust stuck under the first one.
Applied the second one now.
I can confirm that I don't see any newton rings (rainbow effects), no issues with touch functionality either. I didn't experience these issues with the first one either.
Ok. Good to hear, I would like to have an all clear instead of having black adages and bottom chin. If one exist.
Try
Nexus 5
jaime4272 said:
Ok. Good to hear, I would like to have an all clear instead of having black adages and bottom chin. If one exist.
Click to expand...
Click to collapse
Unfortunately a transparent full-coverage one doesn't exist due to the edge-less design. If you have used transparent tempered glass screen protectors on devices with 2.5D curved screens before, you may have noticed that the corners don't adhere to the screen causing a border of air to form around the protector.
This is the reason why full-coverage protectors have colored borders around the viewing area. It hides those ugly air gaps around the display.
There are transparent protectors available. The Atfolix Glass protector is a transparent one, higher quality than the regular Chinese tempered glass protectors. But it doesn't cover the whole display like all the other transparent protectors available for the Mix.
I understand that, but what I was saying is that they could make them without the black edges and leave it all crear.
Xiaomi's original tempered glass
I bought Xiaomi original tempered glass but now in the middle of my screen I have like an oily colored stain. Of course it's not oil but I think there is air between my screen and the tempered glass. Doesn't the tempered glass contain holes for the sound? I hope it's not my screen. But when I turn of my device I can see it too so I really think it's the tempered glass. Need a new one! Ordered one so we'll see.
i bought this one FX-Hybrid-Glass Panzerglasfolie Xiaomi Mi Mix Glasfolie Panzerglas from
http://www.ebay.com/itm/332032300020?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
and it looks better than any previous one i have bought before.
jaime4272 said:
i bought this one FX-Hybrid-Glass Panzerglasfolie Xiaomi Mi Mix Glasfolie Panzerglas from
http://www.ebay.com/itm/332032300020?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
and it looks better than any previous one i have bought before.
Click to expand...
Click to collapse
Is it covering the active part of the display completely? If not you normally have a halo effect on the left and right side of the protector. With the Mix maybe on the top side too. If the product pictures are real it is not. But well, if it is i'll order one too. The fullscreen ones i've tested are crap.
---------- Post added at 10:09 AM ---------- Previous post was at 10:04 AM ----------
liobeir said:
I bought Xiaomi original tempered glass but now in the middle of my screen I have like an oily colored stain. Of course it's not oil but I think there is air between my screen and the tempered glass. Doesn't the tempered glass contain holes for the sound? I hope it's not my screen. But when I turn of my device I can see it too so I really think it's the tempered glass. Need a new one! Ordered one so we'll see.
Click to expand...
Click to collapse
I've tried the Raugee and the Imak protector. Both show the same effect. The problem is that these fullscreen protectors only stick on the edges. The air layer between the display glass and the protector causes this oily rainbow effect. Depending on the phones and the surroundings temperature it's more or less visible.
jaime4272 said:
i bought this one FX-Hybrid-Glass Panzerglasfolie Xiaomi Mi Mix Glasfolie Panzerglas from
http://www.ebay.com/itm/332032300020?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
and it looks better than any previous one i have bought before.
Click to expand...
Click to collapse
Can you post pictures of this one please. My order got cancelled due to some processing delay. If this is good, I'll place another order.
I have ordered OnePlus 6 today.. And waiting that would come tomorrow.. This time it's almost 95 percent glass so protector would be must need to keep the device mint, especially for the BACK!!
So Let me start of the thread for the OnePlus 6 Screen Protector.
I have ordered OnePlus 6 Full body screen protector from the Gadgetshieldz.
And I hope this time it's merely impossible to get the best TGP soon. Please let know your suggestions.
Finally got my Gadgetshieldz protectors and applied it. The protector is fitting well and all the holes are perfect. Important part is, its providing lot of grip to the OP6 which is very slippery without the protector. Might go for a Tempered Glass for the screen if I find a decent one but the back protector is a keeper. Take a look at the images of the protectors applied on my OP6. Can't go wrong with these for a low price.
Hunkman said:
I have ordered OnePlus 6 today.. And waiting that would come tomorrow.. This time it's almost 95 percent glass so protector would be must need to keep the device mint, especially for the BACK!!
So Let me start of the thread for the OnePlus 6 Screen Protector.
I have ordered OnePlus 6 Full body screen protector from the Gadgetshieldz.
And I hope this time it's merely impossible to get the best TGP soon. Please let know your suggestions.
Click to expand...
Click to collapse
Thanks. Ordered one as well. Mostly for the back protector since the phone is glass. Hopefully OnePlus releases an official TGP that includes a back protector.
Ordered same too !
Great worldwide free shipping. Wonder how long it takes...
I bought the original bumper carbon case but forgot to buy the combo (case + screen protector).
Now I don't know if I should buy the original oneplus screen protector (tempered glass) or buy something from a 3rd party.
Any ideas?
Hi,
I thought we cannot use bumper with tempered glass ?
vats219 said:
Hi,
I thought we cannot use bumper with tempered glass ?
Click to expand...
Click to collapse
Hmm, you may be right.
This is the one I bought:
https://www.oneplus.com/uk/oneplus-6-protective-case
And this was the bundle:
https://www.oneplus.com/uk/oneplus-6-total-protection-bundle
What is the difference between the protective case and the bumper?
I think bumper protects the screen better. But if you use a tempered glass you cannot use bumper as the covered lips of the bumper will damage the tempered glass.
vats219 said:
I think bumper protects the screen better. But if you use a tempered glass you cannot use bumper as the covered lips of the bumper will damage the tempered glass.
Click to expand...
Click to collapse
Gotcha.
I will wait to get it and see how it goes.
Anyone had any experience with those nano liquid protections (ie: https://www.spigen.com/collections/oneplus/products/screen-protector-glas-tr-nano-liquid )?
I ordered the phone with the Nylon bumper case. I almost pulled the trigger on the tempered glass protector as well but I was worried it wouldn't fit with the bumper case and it appears I was right.
The great news is that this phone comes with a pre-applied plastic screen protector. So the screen will be protected right from the beginning. This will buy us time for the release of more tempered glass protectors that may fit with bulkier cases like the nylon bumper case.
Walk-through video showing the OEM screen protector getting installed:
https://youtu.be/ES-s9KQrUTY?t=569
sn0warmy said:
I ordered the phone with the Nylon bumper case. I almost pulled the trigger on the tempered glass protector as well but I was worried it wouldn't fit with the bumper case and it appears I was right.
The great news is that this phone comes with a pre-applied plastic screen protector. So the screen will be protected right from the beginning. This will buy us time for the release of more tempered glass protectors that may fit with bulkier cases like the nylon bumper case.
Walk-through video showing the OEM screen protector getting installed:
https://youtu.be/ES-s9KQrUTY?t=569
Click to expand...
Click to collapse
That's good info, sn0warmy, appreciate the input! It's definitely good that it will buy us time for that.
sn0warmy said:
I ordered the phone with the Nylon bumper case. I almost pulled the trigger on the tempered glass protector as well but I was worried it wouldn't fit with the bumper case and it appears I was right.
The great news is that this phone comes with a pre-applied plastic screen protector. So the screen will be protected right from the beginning. This will buy us time for the release of more tempered glass protectors that may fit with bulkier cases like the nylon bumper case.
Walk-through video showing the OEM screen protector getting installed:
https://youtu.be/ES-s9KQrUTY?t=569
Click to expand...
Click to collapse
According to OnePlus support chat, the tempered glass protector will work with the bumper case. I'm not saying they are right, but I'm saying there is a chance
suprstar29 said:
According to OnePlus support chat, the tempered glass protector will work with the bumper case. I'm not saying they are right, but I'm saying there is a chance
Click to expand...
Click to collapse
With the ultimate bundle, you get the choice of bumper case and tempered glass. It wouldn't make sense to bundle them if they didn't work together, but who knows. The strange this is that the bundle that includes only a case and glass, doesn't offer a bumper case.
I have the bundled case and the sandstone. Both fit with the OnePlus tempered glass. I would guess the bumper does too having looked at it in the shop but not 100% as I didn't put it on.
Since they sell the bumper and the tempered glass together and there are no notes in the tempered glass that it does not work with the bumper case, i am really hoping that you can use the 2 together since that is what i bought. if they don't work together, i will have to send the bumper back.
emontes said:
Gotcha.
I will wait to get it and see how it goes.
Anyone had any experience with those nano liquid protections (ie: https://www.spigen.com/collections/oneplus/products/screen-protector-glas-tr-nano-liquid )?
Click to expand...
Click to collapse
I did not have experience with this particular brand but ordered from AliExpress for $3.50 each about six months ago for my Samsung Galaxy S8+. It's been six months w/o a screen protector and not a single scratch insight. I don't have the rough use of my phone but don't baby it either. Long and short of it is: This type of product MAY work and just to try it out, I would not spend $24. $4 and wait of 2 weeks should get you the same product at a much cheaper price to try. Here is the link to the product I used:
https://www.aliexpress.com/item/Uni...091.html?spm=a2g0s.9042311.0.0.42ad4c4d25n1Zf
P.S. No relation or financial interest with this company.
Gr8man001 said:
I did not have experience with this particular brand but ordered from AliExpress for $3.50 each about six months ago for my Samsung Galaxy S8+. It's been six months w/o a screen protector and not a single scratch insight. I don't have the rough use of my phone but don't baby it either. Long and short of it is: This type of product MAY work and just to try it out, I would not spend $24. $4 and wait of 2 weeks should get you the same product at a much cheaper price to try. Here is the link to the product I used:
https://www.aliexpress.com/item/Uni...091.html?spm=a2g0s.9042311.0.0.42ad4c4d25n1Zf
P.S. No relation or financial interest with this company.
Click to expand...
Click to collapse
Nice.one,man, I bought it, let's see!
Thanks for the heads up.
brangalm said:
Thanks. Ordered one as well. Mostly for the back protector since the phone is glass. Hopefully OnePlus releases an official TGP that includes a back protector.
Click to expand...
Click to collapse
One question. Are you sure the official TGP includes a back protector?. In Spanish online store don`t say anything about this.
Greetings from Spain.
When you uncheck the body-protector, you pay 9.95$ instead of 11.95$ so pretty sure it does.
Hecke92 said:
When you uncheck the body-protector, you pay 9.95$ instead of 11.95$ so pretty sure it does.
Click to expand...
Click to collapse
Are you talking about this? :
OnePlus 6 3D Tempered Glass Screen Protector Black
$19.95
x 1
This is the official TGP from OnePlus.com online shop. In the description says :
In the Box:
OnePlus 6 3D Tempered Glass Screen Protector
Don't say it has a back protector.
Greetings from Spain.
I am sorry mate, I got you wrong.
I was talking about gadgetshieldz, there a back protector is included.
Oneplus official tgp doesn't include a back protector (and @brangalm says "hopefully" so he isn't sure either), but I ordered it as well.
Just wondering if anyone knows where to buy decent FILM screen protectors from for the Redmi Note 9S.
The one that came with the phone is the type I mean. I hate the tempered glass type, they only ever last me a week or so before a crack appears somewhere.
It seems like film protectors are easy to find for other phones but not Xiaomi models.
Thanks in advance.
galaxy6220 said:
Just wondering if anyone knows where to buy decent FILM screen protectors from for the Redmi Note 9S.
The one that came with the phone is the type I mean. I hate the tempered glass type, they only ever last me a week or so before a crack appears somewhere.
It seems like film protectors are easy to find for other phones but not Xiaomi models.
Thanks in advance.
Click to expand...
Click to collapse
Nillkin , it's cool
galaxy6220 said:
Just wondering if anyone knows where to buy decent FILM screen protectors from for the Redmi Note 9S.
The one that came with the phone is the type I mean. I hate the tempered glass type, they only ever last me a week or so before a crack appears somewhere.
It seems like film protectors are easy to find for other phones but not Xiaomi models.
Thanks in advance.
Click to expand...
Click to collapse
xtremeguard is a great film...been using ewm on my last 3 phones....be sure to search for coupon codes
Any suggestions for tempered glass
almir1984 said:
Any suggestions for tempered glass
Click to expand...
Click to collapse
I'm not gonna recommend something but rather not recommend something which is the nillkin CP+ Max XD, it's a decent tempered glass honestly, but the black border is honestly too thick. It covers your screen just fine, but then you'll sacrifice a tiny bit of your screen being blocked by that thick black border. and also my sensors just can't function properly because of the stupid black border.
I'm ordering a few screen protectors that hopefully will fit my need. I ordered Nillkin CP+ Pro (the black border is a tat thinner than the XD), ringke dual easy film, and the last one is I guess some local product named Uneed hybrid pro glass. The last two are some kinda of film protector or in here we call them "hidrogel".