I am from the Philippines and I just recently get my v50 after it get fixed for a broken charging port. Apparently, Upon inserting my SIM (Globe) the sim toolkit can detect it but the signal is like jammed and there is an STOP/Disabled logo in it.
Any tips how can I fix it? I can't use my mobile data.
Same issue here looking forward on this
I had a similar issue. What I did was, I went into settings then mobile networks. (Forgive me if I don't explain properly I don't have the phone on me now) and then I think I went into apn, turn apn on Off.. or I think it was toggle with paygo/contract apn and the test.
That got it working for me.
Related
Hi,
I am unable to use 3G on htc desire. I have set the correct APN. The problem is that when I choose "WCDMA" as the network mode, it automatically switches back to "GSM only". The place where I live has no problem with 3G availability. I feel the problem lies more with my handset. Can someone please help ? Is there anything that I can do to get rid of this problem. My phone has lost its warranty since I unlocked it.
Have you tried any other operator sim card? It's a good troubleshooting to do when this kind of problems happen...
Had problems like that before and it was an incorrect APN setup.
Thanks for getting back. I tried with a different sim and a different operator. They were also not successful. APN setting is perfectly right for the current sim. The APN settings were given by the operator.
rkk1 said:
Thanks for getting back. I tried with a different sim and a different operator. They were also not successful. APN setting is perfectly right for the current sim. The APN settings were given by the operator.
Click to expand...
Click to collapse
Are you using any kind of widget to switch APN on / off, 2G/3g ?... I noticed that for example, Widgetsoid can mess with 3g connection so much that sometimes you need to remove it and reboot the phone so you can get things working again.
Try using another SIM card too. It may give you a clue on what's going on: wrong settings / card with no data activated / etc ...
I am not using any widget to turn on/off the 3g. EDGE services work on my mobile while 3G is not working. If I use the sim card on to a different mobile, 3G works fine without any problem. Tried using another sim card with 3G data activated and that also did not work fine for me on HTC Desire.
Hi,
I have a Nexus S I9023 with baseband I9023XXKI1
Provider is Telenet in Belgium, which is a full MVNO with its own MNC
When running any Gingerbread version, the phone works fine when going out of the country, and returning.
But with any ICS rom (stock or CyanogenMod) the phone will not be able to connect to any international providers, when my providers SIM is installed. But when I stick my providers SIM into another phone the SIM will switch over, after which I can put it back into my Nexus S and I can roam to any other international provider without problems, but the phone will not switch back to my own provider when I get back into the country. At this point I again have to put the Telenet SIM into another phone to force it out of roaming mode after which I can put it back into my Nexus S and it works again on my own provider.
I also tried with another Telenet SIM and had the exact same problem, so it is not a problem with the specific SIM itself. But when I stick in a non-Telenet SIM it does switch to roaming and non-roaming without problems. So it clearly is a combination of the ICS ROM with the Telenet SIM.
The only other thing I found is that the MNC code in apns-conf.xml is wrong for Telenet. It is listed as MNC=10 which used to be correct until sometime last year when everyone was issued a new SIM with MNC=05. But with a custom APN setup mobile data works fine.
If anyone has any idea how I could solve this issue, I would love to hear about it!
Cant Activate/Deactivate International Call Roaming on Nexus S.
Hi,
Same issue here, mine is Nexus S, running ICS 4.0.4, baseband version I9020XXKI1. I am not able to make calls in roaming. I spoke to my provider (O2 Germany) and they say that, I have to deactivate the lock (Lock to activate roaming). I haven't found any way to unlock this service. I have not tried what the OP has mentioned in his post (i.e., to put the sim into another phone and then try back in Nexus S). But I would like to know, how can I Activate or Deactivate the roaming lock ??
Thanks,
Cheers!!
esunny said:
Hi,
Same issue here, mine is Nexus S, running ICS 4.0.4, baseband version I9020XXKI1. I am not able to make calls in roaming. I spoke to my provider (O2 Germany) and they say that, I have to deactivate the lock (Lock to activate roaming). I haven't found any way to unlock this service. I have not tried what the OP has mentioned in his post (i.e., to put the sim into another phone and then try back in Nexus S). But I would like to know, how can I Activate or Deactivate the roaming lock ??
Thanks,
Cheers!!
Click to expand...
Click to collapse
The only roaming feature you can enable is for Data. This has no effect on roaming for normal phone usage.
You can change this setting under "System Settings" -> "More..." (under Wireless & Networks) -> "Mobile Networks"
Here you will find a "Data roaming" option, and possibly a "National data roaming" option
I have a Desire Z with Android 4.0.4 and Telenet for the cellphone also. I noticed I have to activate the romaing in Belgium to have the data connection which is strange as I'm in Belgium. Now I hear that they can be issues calling/sending sms abroad... I'll see when I'll be in Croatia.
I activated for the moment all the option (data roaming, national roaming) for the moment, nothing more strange than having the romaing activated and the 'R' in the network signal.
National Roaming seems to be needed on some phones, since the Telenet SIM swap last year to get a data connection in Belgium. On my own Nexus S phone I don't have the problem. But on my wife's SE Xperia Mini Pro (2011 model) with stock Android 2.3.4 it does have this issue.
The old sim used MNC=10, while the new SIM uses MNC=05 and it seems that some phones have some kind of issue with that.
MNC is the Mobile Network Code, which together with the MCC (Mobile Country Code) forms a identifier per provider.
http://en.wikipedia.org/wiki/Mobile_Network_Code
I narrowed down the issue somewhat.
Basically my prior workaround that the SIM needed to be swapped to another phone to force the network to connect was false.
What actually needs to happen to force the phone to enter or exit roaming is to pull the battery.
Rebooting the phone, or shutting it down and rebooting (cold boot) does not make a difference, the battery needs to be pulled and then the phone will switch networks.
I found this by accident, because I was out of the country and it was as normal refusing to switch to roaming mode. Then the battery died and I connected power to the phone and booted it, and it suddenly connected to a foreign provider in roaming mode.
Getting back to Belgium, it again refused to switch back, so I verified it by just pulling out the battery and putting it back and the phone successfully was able to connect to Telenet again.
In other words, some component needs to be reset for it to successfully switch to roaming and back. This component does not get turned off when the phone is turned off, so the battery needs to be pulled.
Hello,
I have a Nexus 5 phone that came with Kitkat a few months back. The phone worked without issues until I decided to update to Lollipop 5.0 (OTA update) at the end of November. Initially the phone started to have troubles to detect the network at certain times - typically "playing" with the settings "Preferred network type" by changing from 4G to 2G, restarting, letting the phone detect the network on 2G mode and change back to 3G or 4G would fix the problem. The issue became more and more frequent until a point where i can not change the "Preferred network type" from 4G to any other type (as if it is "glued" on that setting). At this point my phone does not recognize at all the cellular network but It does seem to recognize the SIM card since i need to enter the 4 digit code to unlock SIM and it displays the network name, just no service.
I've researched the internet and I've tried several things but nothing seems to fix it such as restart mobile, change to airplane mode and back, take out and re-insert SIM card, request new SIM card from operator. The APN settings seem to be OK.
I've noticed that a new 5.1 version just came out and although I was not fully familiar with the process i decided to give it a try (after reading several instructions) and update manually (using factory images posted) and see if that would fix it. The phone is now with version 5.1 and still can't recognize the cellular network - no service. Everything else works fine, including Wi-Fi.
Has anyone experienced such issue after OTA update? The only odd thing I can think of is that I did the initial OTA update to 5.0 in US while i was on travel from Europe, but I can't say if this would in some way contribute to the issue. The mobile is D821 model.
Since I was stuck and mobile is within warranty period, I have sent it to service repair. I would be interested to know ideas of what could be the issue cause.
Sorry for long message, any help would be very much appreciated.
Pedro
a few days ago I switched from cm to AEX 7.1.2 on my moto g. Whether that has anything to do with it I don't know.
Anyway last night the phone was working fine then this morning I see that the cell network is disconnected and the phone doesn't see the simcard. However when I put in another simcard from a different network it works normally. I switch back to my sim and it works for about 20 seconds where I can make a call or text then it shuts down again and dowsn't recognize the sim then does again once I have switched the sims but only for 20 seconds. I don't understand what is happening to the phone and why it is doing this. I need help. I have tried picking different network modes from the list after inserting this code #*#*4636#*#* nothing has worked so far. I haven't systematically gone through each one at a time yet and the list is quite long. I haven't seen a list of modes that long before there are over 10 of them from auto prl to scdma etc... Some of them I have never heard of like the scdma one. wif and bluetooth are working ok if that means anything. Thanks for any help
Also when I go into settings the network section is greyed out and under prefered network type it says Invalid Network Mode (-1) Ignore. I only tried changing the modes when this problem arose my changing these modes was not the cause
i've had similar issues, when i skipped using mobile data for a long time, my non-data SIM would dropout intermittently. i changed SIM slots didn't solve it either. other SIM was fine in either slot. just before replacing what i thought was a faulty SIM, without turning mobile data on, i just set the problematic SIM for data. that solved mys issue. however, running mobile data on back on the original setting didnt cause any more issues either.
I was traveling to and from US and India. 2 Days back when I entered London airport for US, my mobile did not show any signal what so ever. It was no service. It was working fine when i boarded the flight in US.
Now following things I have tried according to my knowledge
1. I tried disabling the sim card, changing from 2g-3g- 4g. No improvements.
2. I went to menu by *#*#4636#*#*, and trying radio on and radio off. Nothing
3. I suspected that antenna is damanged and it hardware problem.
4. But then this wired thing happend, while playing around when both the sim are active, I turn of the sim one, the mobile data is switched back to second sim. Then when i again switch back the sim 1, it is automatically configured for 2g. It gets signal, I can make calls and it works good. Moment I switch the mobile data to that sim the network vanishes and back to no service/emergency calls.
5. I figured that there is some problem with the sim, so I inserted that sim into old samsung grand mobile which 3G phone. It works flawlessly.
6. Tried other sims in the moto G, 4g dosent work for some sim cards.
7. By reading on I found that lot of people have this problem and have solved it by flashing firmware. I tried that too. Tried stock rom, new osprey 7.* Nothing seems to be working.
Any thoughts and comments are welcome. I am kind of frustrated by this small bug. Might be lapse on motolora part. If someone is still active in this community please help, reply.