I have been trying to flash firmware into my rom, however, it stops while flashing Super.img at 50% and failed. need advices my phone is 985F PK i have tried many roms.
Please help
Related
hi at all, im facing this problem too, i read and found all the solutions available but i have one problem, when i try to restore from odin with a stock rom, it fails at step 4:
Can't open the serial(COM) port.
what to do next ?
I hope you are not using older version of odin.
is this your first time flashing stock rom? may be tar file is not perfect!
try flashing stock gingerbread.
Please help
I have a gionee pioneer p3 and I got it stucked in a boot loop while trying to install a custom font after rooting it with no custom recovery tool installed. I downloaded the phone's stock firmware from needrom but discovered the firmware for gionee p3 on that site is corrupt as I couldn't extract the zip file to my desktop. I downloaded a custom rom and after flashing it using SP flash tool, my phone won't even boot anymore, the phone just remains dead like there's no battery in it. But when I connect to sp flash tool, it recognises my phone so I think its a firmware issue or a problem with the bootloader. I want to know if its possible to copy the firmware from a working gionee p3 and use it to flash my bricked phone, if it is, please I need guide on how to do this cos I really want my phone back to its stock rom. If not, any other solution will be much appreciated. I need my phone up and running again please help.
As you mentioned, the ROM you downloaded earlier might be corrupted. Since flash tool recognizes your phone, i think you should try to download a new firmware and try to flash it via flash tool.
Imhuurd said:
As you mentioned, the ROM you downloaded earlier might be corrupted. Since flash tool recognizes your phone, i think you should try to download a new firmware and try to flash it via flash tool.
Click to expand...
Click to collapse
Thats my problem, i cant find the firmware anywere else as every other site still links me to the same file i downloaded earlier which is corrupt. That is why i want to know if its possible to copy the firmware from a working phone and use it to flash the dead phone or if i can be taught how tocreate a scatter file for one of the custom roms i have, i'l be grateful. Getting the firmware is my biggest problem. Thanks for your time and help.
Hi i wanted to flash a custom marshmallow rom i was rooted and custom rom already but when i flashed the rom it didnt opened so i tried to flash a stock rom GR from sammyfirmware but it dosnt pass it fail in the start i read somewhere about a fix with the sammy roms that dont pass that you must rename the hidden.img to hidden.img.tar does anyone can help me or has anyone rom with seperate files of csc , modem and etc ...
manouvras said:
Hi i wanted to flash a custom marshmallow rom i was rooted and custom rom already but when i flashed the rom it didnt opened so i tried to flash a stock rom GR from sammyfirmware but it dosnt pass it fail in the start i read somewhere about a fix with the sammy roms that dont pass that you must rename the hidden.img to hidden.img.tar does anyone can help me or has anyone rom with seperate files of csc , modem and etc ...
Click to expand...
Click to collapse
Hi,
What is the exact error you get? Which firmware version you tried from sammobile?
manouvras said:
Hi i wanted to flash a custom marshmallow rom i was rooted and custom rom already but when i flashed the rom it didnt opened so i tried to flash a stock rom GR from sammyfirmware but it dosnt pass it fail in the start i read somewhere about a fix with the sammy roms that dont pass that you must rename the hidden.img to hidden.img.tar does anyone can help me or has anyone rom with seperate files of csc , modem and etc ...
Click to expand...
Click to collapse
ROM didn't opened because it might have got corrupted while downloading try redownloading it, By the way ROM isn't opened its flashed by any custom recovery.......
In case of stock ROM did you tried Odin and flashed the full zip (tar) file ?
hello, i had flashed CM13 on my galaxy s5. i discovered that there was a moar rom for the s5 so i went ahead and flashed the rom. i aslo tried to flash the included bootloader but it failed and now when i restart my phone i get the firmware error. ive tried flashing the stock firmware through odin and no matter what i try to flash i always get the SW REV CHECK FAILED (aboot) fused 3 binary 1 error. im starting to freak out here. this is my only phone. idk if i was supposed to flash the bootloader file first or what. someone please help me!
Hi! A while ago I decided to flash TWRP and a custom rom (LineageOS) onto my S7. After a while I decided that I would prefer the stock OS. So I tried flashing the stock ROM with Odin and a zip file downloaded from SamMobile. But it would always fail when it got up to flashing system.img. So I tried another firmware using SamFirm, the same problem persisted. So I tried flashing the stock ROM using FlashFire, but no partitions showed up. Smart Switch and Kies 3 just said that my device is not compatible. If anyone can help me, it would be massively appreciated.
P.S. I am doing everything right, I've done this exact process on many other Samsung phones.
Are you extracting the AP, BL, CP and CSC files from the zip, or just putting the zip straight into Odin?
MuscularCrab said:
Hi! A while ago I decided to flash TWRP and a custom rom (LineageOS) onto my S7. After a while I decided that I would prefer the stock OS. So I tried flashing the stock ROM with Odin and a zip file downloaded from SamMobile. But it would always fail when it got up to flashing system.img. So I tried another firmware using SamFirm, the same problem persisted. So I tried flashing the stock ROM using FlashFire, but no partitions showed up. Smart Switch and Kies 3 just said that my device is not compatible. If anyone can help me, it would be massively appreciated.
P.S. I am doing everything right, I've done this exact process on many other Samsung phones.
Click to expand...
Click to collapse
please post the error showing in Odin