This phone's battery shutdown while i was asleep. After waking up tried to login but neither password or fingerprint was working. After i write password and enter nothing happened.
Then i wiped data from recovery mode. This made the device frp locked. I had access to my google account and mi account but this did not work as the device was checking info for hours doing nothing.
After that, tried to access settings using writing SSID. Somehow I accessed setting but when i clicked to open it did nothing. The phone got hanged and had to reboot using buttons. Tried several times without a result.
Then, I tried some unlocker tools to erase frp ex. Unlock tool, ftp locker. Did not work. I am not sure but i think i also clicked some of nvram options on the tool as well.
Then, i went flashing my device using sp flash tool. The rom version was official and correct but sp tool gave me error every time i tried to flash - status sec img type mismatch.
Then, i untick the cust and flashed it. It worked and booted. Everything was good except settings not opening - same problem stuck. Then i tried flashing again, this time deleting preloader that hard bricked the phone.
After that, i used python and bypass mtk and flashed the phone. Now its functioning normally. But i don't have any imei or imeid numbers, sim,wifi,call everything is working normally.
I want to add one thing, the settings stuck problem was caused by the faulty fingerprint sensor. I had to remove the sensor to access settings.
Let me know if anyone has a possible solution to fix the imei issue. Thanks
FYI, this are the findings from kernel
Phn sn,sn, imei, meid blank
cali gsm multi fail
Cali w multi fail
Cali lte multi fail
Hello, I also had the same problem, the phone did not have imei. I solved it by flashing the following file with SP Flash tools in "Doanload only" mode (phone turns on but then turns off but has imei).
If they reach this point and they have imei, they only restore the phone to the latest firmware version with the xiaomi tool v2 program.
http://bigota.d.miui.com/V10.0.1.0....FH_20180919.0000.00_8.1_global_794ccbbe18.tgz
To flash the file with the SPflash tool you have to uncheck some options. When you start the phone put a sim card and check if they have a signal.
Related
Problem :
My phone "Honor 4C" known also as "Gplay mini" stuck in the Emergency Data window (can't be closed) and i can't do anything else expet opening the phone setting from the top menu.
This problem started after my phone battery drained to 0% .
The error window offer to me 3 options :
1) Back up (not working).
2) Factory data reset(restart the phone to the recovery mode).
3) Restart the phone (this option will lead me to the same error window after the restart process end).
this is was not the only problem , like i said i still can access the setting but most of the functionality there not working, besides everything that i change in the setting (exp : switching the developer option on) will be back to the default value after the phone restart.
Solutions that i tried :
- Factory Reset & wiping all the cache data (From the recovery setting) : those option will do nothing after i open the phone every thing is the same.
- Update the system using officials Roms (From the recovery setting) : the update always fail.
- FastBoot : tried to change to the recovery to TWRP , but this didn't work (i think this happen because phone can't save any data and everything is lost after the restart , i said that because when i unlocked the phone & restarted the cmd "fastboot flash recovery" didn't work unless if unlock it & flash without a restart).
Phone info :
Model number : CHC-U01
Build number : CHC-U01 V100R001C185b067
I wish if anyone here can help me and sorry for my bad english.
Note : the only person in the internet that face the same problem and said that he found a solution, he used a software called "DC Phoenix" to fix it. (idk if i can post a link to an external forum or not).
may you should download right number firmware to flash via force upgrade
Hello. I have a le X509, running crdroid v3.8.8 with TWRP. It works like a charm, no issues with safetynet too. A few days back I had to factory reset the phone because it got a virus, and I did so using twrp. Now my phone's IMEI numbers show null. I have tried to fix it through terminal, through xposed, through creating a zip for new imei and flashing it through twrp (something that I found on the forums), the zip flashes successfully too but nothing seems to work. I saw something online about using engineer mode but my phone doesn't show the cds menu. As a result the phone doesn't recognize my sim. Can anyone help me to fix my imei number? I have the original imei numbers, written on the box the phone came in. Any help would be appreciated.
EDIT:The phone isn't charging as well. Will flashing stock rom work for these issues (I found the stock rom online).
EDIT 2: Phone charges slowly, but it charges at normal rate only when switched off, IMEI issue got fixed, for all Mediatek phones just delete the nvram folder from recovery file manager and reboot.
how to fix imei im using Resurrection Remix 5.8.5 i dont have engineering mode either
Do u have any rom full backup .....
Then just restore that
EDIT: Disregard the rest of the post. Restoring the stock ROM and then installing the OTA apparently fixed the issue for me.
G7 Power user here, with Magisk.
Recently I tried to install the new OTA update, so I followed the Magisk tutorial with the Uninstall -> Restore Images, then Install -> Install to Inactive Slot and all that. Magisk had some issues unpacking the zip at first, but it eventually worked, so I rebooted as per instructions.
Then I got bootlooped. I was warned that might happen once or twice after updating, but no, this was a genuine bootloop, lasted forever. Disheartened, I figured my only option was to reflash the stock ROM completely (as flashing just the unpatched boot.img didn't help) and work my way up from there again.
But when I did that, suddenly my phone stopped detecting my SIM card. No matter which slot I put it in, no matter how many times I turned the phone on and off, the airplane mode on and off, it remained unresponsive. My IMEI is blank, even when I use the *#06#. Dialing the *#*#64663#*#* code, which I've seen as a suggestion to solve the issue, doesn't work either, it just returns me to the dial-up screen.
I've tried every solution I could find online. Some of them led me to more bootlopping, some of them simply added a "system integrity compromised" message that prevented updates and most had no effect. I'm not sure where the problem lies in the first place... Any ideas on what I could do? Any help would be much appreciated.
Ok Masters, so I am having the same issue that this guy here:
https://forum.xda-developers.com/ga...mand-error-samsung-galaxy-j7-prime-s-t3929850
I can install any rom. However, the pin to register either face or fingerprint, does not work. So I cannot even get to the fingerprint screen because it returns me to enter pin, and when I re-enter it, it says is wrong. I guess it has something to do, the fingerprint so far, had just worked on Cerberus AOSP rom, but neither on one UI nor 8.1 based roms work. on 8.1 I get setting had stopped.
So, flash stock over odin was already tried and it gets stuck there. Already flashed no verity, no luck, flashed, bbos, godness, venom, no luck.
Any other advice? Seems that somehow I messed up with the encryption and that is making not registering the pin or pattern.
I managed to pass the screen with Magisk, but as soon as system boots and I try to set fingerprint, it says settings stopped. I am really frustrated now.
Thanks,
This was already solved. If anyone is interested in getting more details he they are:
The no command was because someway somehow, the system partition was "busy " or non-writteable, at least that was the message that I was able to read. I don't know how it got to that state, but my solution was the following:
- Select system partition in twrp and tapped on repair file system. I got an error immediately that twrp could not read system block. I changed file system to ext2 and rebooted twrp.
- once again I clicked on repair file system. No errors this time. Rebooted twrp. Changed file system to ext4. Rebooted twrp. Repaired file system again and rebooted twrp once again. Downloaded an aosp 8.1 rom and setted screen lock after the set up, it worked. Then, installed apollo v1. Screen got frozen for a second when setting pin, but it let me pass to set my fingerprints.
Then I knew that it was already working. Installed a One Ui rom to try and it worked again my screen lock with finger print.
Hopefully this helps someone as I found no solution whatsoever in any part of forums or internet, this was pure trial an error over 4 days.
I've been using package disabled pro for a such long while but I made a terrible mistake in the last few days, I saw Google services are using too much ram, therefore I tried to disable all of them once for all and there were no any issue appeared at the moment, but a nightmare happened as when I was reboot the phone, the boot screen was stocked on "SAMSUNG" sign and I was waiting for a long time but the system won't boot up, so I realised I was screwed up that caused a lot of problems for me, for example I forgot my Google password when I tried to reset it shows that I need to receive the code of Google authenticator and I can't use my phone at the moment, so I tried also to use reserve number to receive the code, but the sim card just doesn't play nice with me because the sim card what I bought was from overseas, so I just stocked, ENVENTUALLY I decided to reset the phone from recovery, I tried but the system with same issue as when it booted up, so I decided to flash the firmware but I got only a raspberry pi 4 with me, it's running ArchLinux and I did some research on internet, eventually I found heimdall and then I tried to flash an official firmware I tried few times but it doesn't work and I realised that the FRP is locked I have no idea about how to unlock it, the point is I'm assuming if the App causes problem if I can turned it off, for example if I flash some specific *.bin or IMG it may works somehow? I'm not sure, please help me out!!~
The problem is solved by @hainguyenthao