Hi friends
I want to install this firmware to my PX5 head unit but i couldn't find anywhere. If you know which firmware is this please help me. Thanks.
Is it mtcd post Android system info and MCU version
marchnz said:
Is it mtcd post Android system info and MCU version
Click to expand...
Click to collapse
Hello, yes it is MTCD
Related
Hi guys,
I bought Erisin ES3636U and I don't know if it is MTCD or MTCB. Could somebody help me?
Thanks
hasanpb said:
Hi guys,
I bought Erisin ES3636U and I don't know if it is MTCD or MTCB. Could somebody help me?
Thanks
Click to expand...
Click to collapse
MTCD
ouryou said:
MTCD
Click to expand...
Click to collapse
Thanks
Hi there,
attached is a new MCU v 2.95 which I found at 4PDA.
It is a HA-MCU.
I succesfully flashed it on a Witson unit (MX2) and unlocked the MCU afterwards.
All settings working fine for me.
I found a new setting to display battery voltage is the status bar.
BR
Christian
Can I try such an HA MCU IMG on a LM PX5 unit or can this brick my LM PX5?
iwl said:
Can I try such an HA MCU IMG on a LM PX5 unit or can this brick my LM PX5?
Click to expand...
Click to collapse
You should have a copy of your current MCU to be sure.
I didn't have one so I just tried at own risk.
Important is to first install the mcu unlocker app, than save the dmcu settings (I additionally made photos of all settings).
Then flash the mcu, do unlock and set your settings back.
I manually changes all settings. Was also fairly quick job.
I can't promise that it won't brick. So if your system runs fine, I would not suggest flashing as long as no one confirmed compability.
lets say I am 95% sure, it should work, as most other users suceeded also with changing mcu. Finally its up to you.
BR
Christian
I have tried and can download all kind of LM MCU versions for my LM PX5 - no problem.
I think I wait for some more opinions / experiences if MCU images of different PX5 unit vendors can just be used on every PX5 unit, or at least don't brick the device so I can change MCU back.
gforums said:
Hi there,
attached is a new MCU v 2.95 which I found at 4PDA.
It is a HA-MCU.
I succesfully flashed it on a Witson unit (MX2) and unlocked the MCU afterwards.
All settings working fine for me.
I found a new setting to display battery voltage is the status bar.
BR
Christian
Click to expand...
Click to collapse
MTCE_MX_V2.96 and MTCE_MX2_V2.96
https://forum.xda-developers.com/showpost.php?p=78158956&postcount=1395
iwl said:
Can I try such an HA MCU IMG on a LM PX5 unit or can this brick my LM PX5?
Click to expand...
Click to collapse
Refer MCU cross compatability thread.
OP can you give some more info and link for mcu unlocker app please?
Hi!, I have an chinese Android 6.0 radio on a Skoda Octavia. The data is as follows:
A-MEDIA AUTO 1024X600 S
8 core 64bit cortex a-53 2mb ram
px5 userdebug 6.0.1
What firmware can I install to update android version?
Thanks!!
Is this an mtcd/E unit?
marchnz said:
Is this an mtcd/E unit?
Click to expand...
Click to collapse
Yes, is MCU version: MTCD_MX_v2.51a_1
may 25, 2017
Check out the wiki, lots of good reading to get started.
marchnz said:
Check out the wiki, lots of good reading to get started.
Click to expand...
Click to collapse
Thanks but I'm so Lost!! Anyone could give me what I must download? I'm very noob
Does anyone have a newer Firmware or MCU versions for HZC,
above MTCE-HZC-V2.94bp from CS-X ?
i want to upgrade mcu and OS version for my PX5 , running old Android 6.
thanks.
I'm aware of a V3.30_a1, maybe someone can upload a backup from his device
filtus said:
I'm aware of a V3.30_a1, maybe someone can upload a backup from his device
Click to expand...
Click to collapse
A backup of MCU, how.
@marchnz no clue I thought it should be possible to do some kind of backup copy...
Any other solution? Should i give HA a try?
EDIT: Background, I want to update from Android 9 to Android 10 and install Hal9k. But what I did was to downgrade my V3.30_a1 to V2.94... Don't ask me why I thought it is higher that my previous version
If everything works for you, then I do not recommend crossing the MCU. Try to write to the seller, maybe your update will send you. You can find everything about Crossing MCUs here, if you don't find a suitable type of MCU, then you can lose more than you gain. I recommend using the search engine and you will find a few HZC users:
MTCD - Verified Cross compatible MCUs
This thread is to document MCUs found to be cross-compatible between MTCD units, which includes PX3 and PX5 variants, which share identical mainboard hardware and MCU Chip STM32F091. The following MTCD & MTCE (as of v2.56) MCUs have been...
forum.xda-developers.com
Search results for query: HZC
forum.xda-developers.com
XTRONS was so kind to provide me an MCU Update. Thanks!
filtus said:
XTRONS was so kind to provide me an MCU Update. Thanks!
Click to expand...
Click to collapse
can you share with me the file?
filtus said:
XTRONS was so kind to provide me an MCU Update. Thanks!
Click to expand...
Click to collapse
Bump for sharing the file.
I'd like to ask the gods on XDA if they've seen my PX6 model?
I can't find the relevant MCU on the Internet
I asked the installation shop
But they're just agents
They don't have the relevant software for me to use
My current experience with Hal9k Mod v4 ROM is good
I wonder if I can update the MCU? Or upgrade the Android 10 system
okwap16651 said:
I'd like to ask the gods on XDA if they've seen my PX6 model?
I can't find the relevant MCU on the Internet
I asked the installation shop
But they're just agents
They don't have the relevant software for me to use
My current experience with Hal9k Mod v4 ROM is good
I wonder if I can update the MCU? Or upgrade the Android 10 system
Click to expand...
Click to collapse
This is the first MTC(P) I've seen, it's and MTCD unit. Refer MTCD sub forum.
What is your need to change the software or MCU code? What do you want to achieve.
marchnz said:
This is the first MTC(P) I've seen, it's and MTCD unit. Refer MTCD sub forum.
What is your need to change the software or MCU code? What do you want to achieve.
Click to expand...
Click to collapse
marchnz said:
This is the first MTC(P) I've seen, it's and MTCD unit. Refer MTCD sub forum.
What is your need to change the software or MCU code? What do you want to achieve.
Click to expand...
Click to collapse
Thank you for your reply, I want to know if I can update the MCU version? I can't find related posts and software to update MTCP JP V3.12_1
Maybe the MCU version firmware software is higher than 3.5?
I don't know
Or update to Android 10. Which ROM should I use is compatible or correct?
Яндекс
Найдётся всё
disk.yandex.ru
I have seen the above MCU, but I don’t know which one can be used?
okwap16651 said:
Thank you for your reply, I want to know if I can update the MCU version? I can't find related posts and software to update MTCP JP V3.12_1
Maybe the MCU version firmware software is higher than 3.5?
I don't know
Or update to Android 10. Which ROM should I use is compatible or correct?
Яндекс
Найдётся всё
disk.yandex.ru
I have seen the above MCU, but I don’t know which one can be used?
Click to expand...
Click to collapse
I couldn't find a JP MCU either. Any of the MTCD/E/P RK3399 Android ROMs will work.
I wouldn't change the MCU unless there's an issue.
If you must update MCU, you might check with the reseller. An option could be, with at least a copy of the same revision JP MCU, to try another MCU such as GS or HA. Take a config export first.
See the MCU cross compatibility thread.