AIO GUIDE TECNO KD7
1. Bootloader Unlocking
1. Download & install the ADB driver
2.Enable devloper mode by taping on Build verson(setting->my phone) then enable Oem Unlock & usb debugging from (settings->System->Devloper option)
3.Now connect device & open ADB path & run cmd
command: ADB devices
then reboot to bootloader
command: ADB reboot bootloader
4. unlock bootloader
command: fastboot flashing unlock the phone will ask to confirm
5. now reboot to system
command:fastboot reboot
If you are stuck waiting for the device screen
2. TWRP [unoficial]
https://forum.xda-developers.com/t/twrp-recovery-for-tecno-kd7.4378493/
3. Orange state disabler:
Flashing guide & zip file
Click Wipe →Format Data → Yes → Press Enter.
Then Click Reboot → Recovery (Reboot to Recovery ).
After this, TWRP Recovery Mode will be installed on your phone
Link: Orange disabler.zip
4. Root
1.boot into recovery
2. Flash magisk .zip
llink:https://github.com/topjohnwu/Magisk/releases/download/v21.0/Magisk-v21.0.zip
3.1. Unroot
1.boot into recovery
2. Flash magisk unistaller .zip
link:https://github.com/topjohnwu/Magisk/releases/download/v21.0/Magisk-uninstaller-20201003.zip
5.Stock Firmware Files
Stock boot ,stock recovery & Full Firmware are added
To Flash full firmware
Extract zip & run flash.bat
Link: TECNO-SPARK-5-PRO-KD7-H6211FQRSTU-Q-GL-211101V404-fastboot flash full rom.zip
6. Gsi rom / Custom rom Installation guide:
https://forum.xda-developers.com/t/custom-rom-for-tecno-phone-dynamic-partition.4379341/
vendor : ( 3 sim problem guide )
TECNO-SPARK-5-PRO-KD7-H6211FQRSTU-Q-GL-211101V404
7. Phone Hard Brick fix
https://forum.xda-developers.com/t/phone-soft-brick-phone-on-off-poblem-tecno-device.4378501/
7.1. Flash file:
Link :
TECNO-SPARK-5-PRO-KD7-H6211FQRSTU-Q-GL-211101V404
HIT THE THANKS BUTTON IF ABOVE INFORMATION IS HELPFUL TO YOU
Tecno kd7 full guide
https://forum.xda-developers.com/t/...r-unlocking-root-twrp-stock-firmware.4345557/
What do you mean by boot into recovery? Going fastboot mode? And then writing fastboot flash recovery magisk.zip( for step 3(root)) ?
Also should have the updatest kd7 before rooting?
Thanks in advance for your hard work.
Tanjin01: Thanks
Fast time twrp recovery install: (any bulid version)
[command]
adb devices
adb reboot bootloader
fastboot flashing unlock
fastboot flash recovery twrp.img
fastboot flash vbmeta vbmeta.img
fastboot reboot recovery
[command]
Now boot into twrp recovery and from there "wipe option->Format Data -> yes Format.
Next, Reboot option -> recovery click Wait reboot recovery and flash magisk.zip
Any time root and unroot:
2.going to recovery
Open recovery and install magisk zip. /Magisk uninstall flash
Parvej789 said:
Tanjin01: Thanks
Fast time twrp recovery install: (any bulid version)
1.Fastboot flash recovery .
Fastboot reboot recovery -
Open recovery -wipe format data-yes.
reboot to recovery
and install magisk zip.
Any time root and unroot:
2.going to recovery
Open recovery and install magisk zip. /Magisk uninstall
Click to expand...
Click to collapse
Thank a bunch for consist help with my nobby question(s)!
Correct me if i am wrong before i procced,
Fire up pc, open terminal/cmd and writing the following one after another
[Command]
adb devices
adb reboot bootloader
fastboot flashing unlock
fastboot flash recovery twrp.img
fastboot flash vbmeta vbmeta.img
[command]
Now i boot into twrp recovery and from there "wipe data". Then "advanced wipe" with delvic cache.
Next, again, twrp recovery and flash magisk.zip
Right?
Tanzin01
[Command]
adb devices
adb reboot bootloader
fastboot flashing unlock
fastboot flash recovery twrp.img
fastboot flash vbmeta vbmeta.img
fastboot reboot recovery
[command]
Now i boot into twrp recovery and from there "wipe ". Then "Format Data" with yes Format.
Next, Reboot to recovery .again, twrp recovery and flash magisk.zip
Right?
Thanks man. Have a nice day&life
hey man, all went well till format. in format i saw some error, eg failed to mount /data(something like this). Any idaea why i got this?
[i got a success msg though]]
also can i access twrp recovery mode via volume and power button?(i tried volume up+power button but got adnroid image with "No command".)
Command]
adb devices
adb reboot bootloader
fastboot flashing unlock
fastboot flash recovery twrp.img
fastboot flash vbmeta vbmeta.img
fastboot reboot recovery
[command]
Now boot into twrp recovery and from there "wipe option ->Format Data -> yes Format .
Next,
Reboot options -> recovery click Wait reboot to recovery and magisk.zip flash
Parvej789 said:
Command]
adb devices
adb reboot bootloader
fastboot flashing unlock
fastboot flash recovery twrp.img
fastboot flash vbmeta vbmeta.img
fastboot reboot recovery
[command]
Now i boot into twrp recovery and from there "wipe ". Then "Format Data" with yes Format.
Next,
Reboot options to recovery .again, twrp recovery and flash magisk.zip
Right?
Click to expand...
Click to collapse
All the commands worked smoothly but when again tried to go twrp recovery for rooting, I can't seem to find twrp. I got no command with Android pic and after few seconds default device recovery option. From where I can navigate to fastboot, recovery, wipe and etc.
"
Next,
Reboot options to recovery .again, tw
Parvej789 said:
Next,
Reboot options to recovery .again, twrp recovery and flash magisk.zip
Right?
Click to expand...
Click to collapse
Not sure what you mean by this. But tried
[Command]
adb reboot bootloader
fastboot reboot recovery
[Command]
Which took me to deafult recovery, no Twrp this time.
However I spent some time on xda and found this Command "fastboot boot twrp.img". Will try tomorrow again, will let you know if it worked! Man I'm probably bothering you!
Tanzin01 said:
"
Next,
Reboot options to recovery .again, tw
Not sure what you mean by this. But tried
[Command]
adb reboot bootloader
fastboot reboot recovery
[Command]
Which took me to deafult recovery, no Twrp this time.
However I spent some time on xda and found this Command "fastboot boot twrp.img". Will try tomorrow again, will let you know if it worked! Man I'm probably bothering you!
Click to expand...
Click to collapse
[command]
adb devices
adb reboot bootloader
fastboot flashing unlock
fastboot flash recovery twrp.img
fastboot flash vbmeta vbmeta.img
fastboot reboot recovery
[command]
Now boot into twrp recovery and from there "wipe option->Format Data -> yes Format and back home menu
Next, Reboot option -> recovery click Wait reboot recovery and flash magisk.zip
Unorganized posts! Its xda's fault. Your edited post wasn't shown to me until my last post was posted!
Thanks man. This time I got it. I wrongly rebooted after "format data". I will reflash the twrp file again tomorrow.
Hey, i got myself in trouble again! Everything was working fine till i clicked on "Erase data" from settings. Now i cant boot into sytem, always booting into twrp.Any help?
Should i try flashing android 11, the one you provided here?
Tanzin01 said:
Hey, i got myself in trouble again! Everything was working fine till i clicked on "Erase data" from settings. Now i cant boot into sytem, always booting into twrp.Any help?
Should i try flashing android 11, the one you provided here?
Click to expand...
Click to collapse
Stock recovery.img flash and reboot
To make sure, i am donig as you described,
download stock firmware and get recovery.img.
now flash it: fastboot flash recovery recovery.img
Now reboot, right?
Btw cant i just flash andoid 11 altogether? (and thanks for your constant help
Tanzin01 said:
To make sure, i am donig as you described,
download stock firmware and get recovery.img.
now flash it: fastboot flash recovery recovery.img
Now reboot, right?
Btw cant i just flash andoid 11 altogether? (and thanks for your constant help :fashfashfashfash)
Click to expand...
Click to collapse
Yes
Or
Full flash
KD7-H6211FQRSTU-Q-GL-210520V392.zip
drive.google.com
how to do full flash?
[command]
fastboot flash system FullFlashfirmware.zip
[command]
or
sideload the zip file and then swipe install via twrp?
No .
PC to mobile(fastboot flash)
Now connect device to PC
Unzip flash file PC
Folder open
Click flash.bat
CMD open:
1.Do you want to Reboot device into fastboot [Y/N]=y type enter
2.wipe user data [Y/N]=y type enter
Then flash started
FLASHING success
Reboot to phone on
sadly im not on windows. Anyway thnx. i will try and see flashing recovery. Will let you know the result.
Stock recovery.img flash and reboot options->system click.
Reboot to phone on
Parvej789 said:
Stock recovery.img flash and reboot options->system click.
Reboot to phone on
Click to expand...
Click to collapse
got error
```
fastboot flash recovery recovery.img
Sending 'recovery' (39936 KB)
FAILED (Write to device failed (No such device))
fastboot: error: Command failed
``
tried changing cable but no change.
Oky so i had a hunch, and it was correct. i mounted system and didnt get that error.
Thanks buddy. Took me few tries and combination. but now im back with my device. And as guessed, twrp was/is the culprit. It was locking the system or something like this, perhaps a glich? anyway had to mount system and already wrote the command on terminal, so as soon as phone screen turns on, i get to send the data from pc to phone before phone starts doing many of its stuff.
Wipe option->format data -yes
Reboot option-> recovery and Twrp open
1.boot.img flash
2.super.img flash
3.recovery.img flash
Than reboot
Tanzin01 said:
Thanks buddy. Took me few tries and combination. but now im back with my device. And as guessed, twrp was/is the culprit. It was locking the system or something like this, perhaps a glich? anyway had to mount system and already wrote the command on terminal, so as soon as phone screen turns on, i get to send the data from pc to phone before phone starts doing many of its stuff.
Click to expand...
Click to collapse
Build version correct
Your build version
Hi,
sorry to take your time
I'm french so also sorry for my english
I have installed TWRP 3.51 on my poco x3 pro using ADB
fastboot flash recovery twrp.img
sending
writing
finish
fastboot boot twrp.img
After install phone boot in twrp.
I then use the option booting system and the phone boot again in TWRP
Then i used a boot.img from a rom stock
fastboot flash boot boot.img
I also tried fastboot flash vbmeta vbmeta.img
without success
Each time the phone boot in TWRP
regards
alain
Ps I'm not an expert to please explain as much as you can
Dude what?
Fastboot Flash recovery recovery.img
That's it!
Hold Volume Up+ Power to boot the device to boot into Recovery.
Go to install and select customRomFileOfYourChoice.zip to install it.
Maybe needs a format Data to wipe failed encryption.
Reboot to system.
Done
Haldi4803 said:
Dude what?
Fastboot Flash recovery recovery.img
That's it!
Hold Volume Up+ Power to boot the device to boot into Recovery.
Go to install and select customRomFileOfYourChoice.zip to install it.
Maybe needs a format Data to wipe failed encryption.
Reboot to system.
Done
Click to expand...
Click to collapse
thank you
a stock rom or a custom rom ?
custom ROM.
Stock rom has to be flashed differently.
alix264 said:
Hi,
sorry to take your time
I'm french so also sorry for my english
I have installed TWRP 3.51 on my poco x3 pro using ADB
fastboot flash recovery twrp.img
sending
writing
finish
fastboot boot twrp.img
After install phone boot in twrp.
I then use the option booting system and the phone boot again in TWRP
Then i used a boot.img from a rom stock
fastboot flash boot boot.img
I also tried fastboot flash vbmeta vbmeta.img
without success
Each time the phone boot in TWRP
regards
alain
Ps I'm not an expert to please explain as much as you can
Click to expand...
Click to collapse
You need to install a custom ROM and format the data. If you are using an Android 12 or 13 ROM the data partition is encrypted that's why you're phone is boot looping
its working... I had to format data
thank you very much
All is working now. magisk installed (with trwp), lsposed install
But If i'm going in trwrp backup option, I don't see "system"
?
you have to mount the system partition first and set it via terminal to read/write i think.
But i am also not professional mhh..
Try mount it and when u cant Backup it ask again for help
You Want Video turorial ?
Cheack This Out;- https://forum.xda-developers.com/t/...stom-rom-installation-video-tutorial.4583503/
Tutorial Install Custom rom Selene
Requirements :
- Unlocked Bootloader
- PC / Laptop with working adb fastboot, SP Flash Tools
- recovery and fastboot MIUI Stock ROM ( ID, EEA, Global, CN, Taiwan / pick one that work, or your currently ROM Version )
- put your recovery miui ROM & custom rom to Microsd / OTG
How To : (If you never update OTA then go STEP 1, else go STEP 2)
- BACKUP YOUR IMEI FIRST (on twrp and backup it to another storage or cloud)
STEP 1
- boot to fastboot mode
- flash twrp / ofox command type on minimal adb fastboot "fastboot flash boot nametwrpfile.img" (make sure the twrp file on same folder at the minimal adb fastboot folder)
- press vol + & power
- Format Data
- Yes
- install / flash MIUI Recovery rom, check reflash TWRP / OFOX
- reboot to "BOOTLOADER"
After reboot to bootloader,Device will be in fastboot.
- flash vbmeta " fastboot --disable-verification --disable-verity flash vbmeta vbmeta.img " (make sure the twrp file on same folder at the minimal adb fastboot folder)
- reboot "fastboot reboot " ( if success booting up to system go to STEP 2, if not success, read again from start )
STEP 2
- no need to setup anything, you can skip all that MIUI Setup
- reboot to twrp recovery, press vol + & power
- Format Data
-Yes
- install / flash Custom rom with check automatically reflash TWRP after flashing a ROM checked
- reboot ( If you skipped STEP 1 and not booting, back to fastboot or TWRP, then Go to STEP 1 first, if can't boot to either TWRP / Fastboot, Then you need MTK Bypass + SP Flash Tool)
- ( If you DONE STEP 1 but still no luck check SPECIAL CASE )
- DONE
SPECIAL CASE
if your phone bootloop on mi logo, then do:
- reboot to twrp/recovery, press vol + & power (wait it, be patient)
-If not boot on TWRP, Go to Fastboot
-Reflash TWRP [fastboot flash boot twrp.img]
-Now Boot in to TWRP
- install image boot.img on boot partition from miui rom you have used on first step (see above)
- reflash twrp, install image twrp.img on recovery ramdisk
- [Even if you go to TWRP Without Reflashing again,you still need to flash boot.img on boot and twrp on ramdisk]
- reboot system
- setup phone with ur mobile internet data (if the custom rom have gapps), cause ur wifi bluetooth hotspot are died
- go to twrp again, install custom kernel to fix bug wifi hotspot bluetooth (but u can't instal yukina starlight, it will make bootloop, use another I Will Recomend Yukina Stamine)
- done u can reboot system
N.B. - If You are in MIUI 13,Then it will won't Work,First Downgrade to MIUI 12.5.xx
N.B. - Just Do Normal Format,Dont Wipe like Delvik,cache,System,Vendor etc.
N.B. - Try To Take All Files(Twrp.img,boot.img,miui recovery.zip,Custom rom zip, custom kernel.zip) In your Memory card and Avoid Use OTG
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
not working in my device
fastboot flash boot twrp.img
my device went in bootloop
i have also tried
Fastboot boot twrp.img
this is throwing " status read failed (too many links)
(also tried with downgrading to MIUI-12 but no success)
Then i tried to boot into fastbootD mode.
with command "Fastboot reboot fastboot"
Now my device is in the infinite boot loop.
Please help
Is that Redmi 10 Selene ?
And Which twrp you used ?
Neelthegamer007 said:
Is that Redmi 10 Selene ?
And Which twrp you used ?
Click to expand...
Click to collapse
is its redmi 10 selene
and i have used twrp you placed here
NOOBOHOLIC said:
is its redmi 10 selene
and i have used twrp you placed here
Click to expand...
Click to collapse
Install miui 12.5.** with fastboot rom,and then unlock bootloader or if its unlocked then disable security by flashing vbmeta.img , comand on post.
Then flash TWRP
fastboot flash boot [space] drag and drop twrp.img file,after flashing reboot your device by holding power button.
Neelthegamer007 said:
Install miui 12.5.** with fastboot rom,and then unlock bootloader or if its unlocked then disable security by flashing vbmeta.img , comand on post.
Then flash TWRP
fastboot flash boot [space] drag and drop twrp.img file,after flashing reboot your device by holding power button.
Click to expand...
Click to collapse
But nothing is working now its just stucked in the bootloop
not booting into recovery
not booting into fastboot
how i do it further
You need SP flash tool, and mtk auth bypass just download it, bypass mtk auth and go to sp flash tool, on auth file section select mtk scatter file from miui fastboot rom/images folder, and on sp flash tool un select every file except boot or boot.img
And click the download button [ must be sure that you need to only download the boot.img file,no other file.]
After download,you can go fastboot
If you can't understand
Get help from YouTube.
I only want root. Is it better to install magisk from this twrp(After downgrading). Or staying in miui 13 & flashing patched boot image?
Tawsif999 said:
I only want root. Is it better to install magisk from this twrp(After downgrading). Or staying in miui 13 & flashing patched boot image?
Click to expand...
Click to collapse
If you only root,then take miui 13 rom's fastboot file and extract boot.img, patch with magisk anf flash vbmeta 1st and then patched boot.img eith adb, enough
Tawsif999 said:
I only want root. Is it better to install magisk from this twrp(After downgrading). Or staying in miui 13 & flashing patched boot image?
Click to expand...
Click to collapse
Downgrade is not nessesery with only root
Neelthegamer007 said:
If you only root,then take miui 13 rom's fastboot file and extract boot.img, patch with magisk anf flash vbmeta 1st and then patched boot.img eith adb, enough
Click to expand...
Click to collapse
Are you sure I need the fastboot rom only. Because I'm already downloading a recovery rom.
And after downloading I have to flash the vbmeta.img before flashing patched boot image? But why? vbmeta is already included in the rom. Can you please explain this.
Tawsif999 said:
Are you sure I need the fastboot rom only. Because I'm already downloading a recovery rom.
And after downloading I have to flash the vbmeta.img before flashing patched boot image? But why? vbmeta is already included in the rom. Can you please explain this.
Click to expand...
Click to collapse
You need to flash vbmeta for disabled verified boot, otherwise patched boot.img is not verified,so flashing patched boot.img will be fail or will be cause of a bootloop
And as i know on recovery rom you won't get the boot.img file,but i,m not sure if you got on recovery rom then it's also file,i will work,and i,m 100 % sure, and vbmeta is inside the rom for enable verified boot,but you need to disable it to flash patched boot img file,its necessary for most of the devices,but in some device, its not necessary,but why would you take risk of a unwanted bootloop?
Disable vbmeta command
fastboot --disable-verification --disable-verity flash vbmeta vbmeta.img
Any other query's ?, just reply....
Neelthegamer007 said:
You need to flash vbmeta for disabled verified boot, otherwise patched boot.img is not verified,so flashing patched boot.img will be fail or will be cause of a bootloop
And as i know on recovery rom you won't get the boot.img file,but i,m not sure if you got on recovery rom then it's also file,i will work,and i,m 100 % sure, and vbmeta is inside the rom for enable verified boot,but you need to disable it to flash patched boot img file,its necessary for most of the devices,but in some device, its not necessary,but why would you take risk of a unwanted bootloop?
Disable vbmeta command
fastboot --disable-verification --disable-verity flash vbmeta vbmeta.img
Any other query's ?, just reply....
Click to expand...
Click to collapse
Thank you very much. I thought I have to flash using fastboot flash vbmeta vbmeta.img. But now I can understand, the command is not for flashing. It's for disabling verification.
Tawsif999 said:
You are most welcome
Click to expand...
Click to collapse
can you tell me more for install custom rom i try 5days and 50time bootloop please help
Teaykhuad said:
can you tell me more for install custom rom i try 5days and 50time bootloop please help
Click to expand...
Click to collapse
Sure,are you active right now ? Reply again,i eill give you my telegram..
yes i trying to booting now i dm you
Teaykhuad said:
yes i trying to booting now i dm you
Click to expand...
Click to collapse
How's your experience?
Neelthegamer007 said:
How's your experience?
Click to expand...
Click to collapse
Good bro You teach me to flash custom rom and pixel expirence is not bad but im go to miui and install https://forum.xda-developers.com/t/ultra-rooted-miui-package.4487967/ this for speed and fast animation
Neelthegamer007 said:
Tutorial Install Custom rom Selene
Requirements :
- Unlocked Bootloader
- PC / Laptop with working adb fastboot, SP Flash Tools
- recovery and fastboot MIUI Stock ROM ( ID, EEA, Global, CN, Taiwan / pick one that work, or your currently ROM Version )
- put your recovery miui ROM & custom rom to Microsd / OTG
How To : (If you never update OTA then go STEP 1, else go STEP 2)
- BACKUP YOUR IMEI FIRST (on twrp and backup it to another storage or cloud)
STEP 1
- boot to fastboot mode
- flash twrp / ofox command type on minimal adb fastboot "fastboot flash boot nametwrpfile.img" (make sure the twrp file on same folder at the minimal adb fastboot folder)
- press vol + & power
- Format Data
- Yes
- install / flash MIUI Recovery rom, check reflash TWRP / OFOX
- reboot to "BOOTLOADER"
After reboot to bootloader,Device will be in fastboot.
- flash vbmeta " fastboot --disable-verification --disable-verity flash vbmeta vbmeta.img " (make sure the twrp file on same folder at the minimal adb fastboot folder)
- reboot "fastboot reboot " ( if success booting up to system go to STEP 2, if not success, read again from start )
STEP 2
- no need to setup anything, you can skip all that MIUI Setup
- reboot to twrp recovery, press vol + & power
- Format Data
-Yes
- install / flash Custom rom with check automatically reflash TWRP after flashing a ROM checked
- reboot ( If you skipped STEP 1 and not booting, back to fastboot or TWRP, then Go to STEP 1 first, if can't boot to either TWRP / Fastboot, Then you need MTK Bypass + SP Flash Tool)
- ( If you DONE STEP 1 but still no luck check SPECIAL CASE )
- DONE
SPECIAL CASE
if your phone bootloop on mi logo, then do:
- reboot to twrp/recovery, press vol + & power (wait it, be patient)
-If not boot on TWRP, Go to Fastboot
-Reflash TWRP [fastboot flash boot twrp.img]
-Now Boot in to TWRP
- install image boot.img on boot partition from miui rom you have used on first step (see above)
- reflash twrp, install image twrp.img on recovery ramdisk
- [Even if you go to TWRP Without Reflashing again,you still need to flash boot.img on boot and twrp on ramdisk]
- reboot system
- setup phone with ur mobile internet data (if the custom rom have gapps), cause ur wifi bluetooth hotspot are died
- go to twrp again, install custom kernel to fix bug wifi hotspot bluetooth (but u can't instal yukina starlight, it will make bootloop, use another I Will Recomend Yukina Stamine)
- done u can reboot system
N.B. - If You are in MIUI 13,Then it will won't Work,First Downgrade to MIUI 12.5.xx
N.B. - Just Do Normal Format,Dont Wipe like Delvik,cache,System,Vendor etc.
N.B. - Try To Take All Files(Twrp.img,boot.img,miui recovery.zip,Custom rom zip, custom kernel.zip) In your Memory card and Avoid Use OTG
View attachment 5793645
Click to expand...
Click to collapse
How do I restore WiFi and Bluetooth after flashing