Database Info

[HOW TO] Flash recovery from phone.

HEY FOLKS,
This THREAD will GUIDE you to flash recovery.img from PHONE.
I found many of the people found difficult to flash recovery via FASTBOOT and TERMINAL EMULATOR by using CODES.
Here is a SIMPLE method to flash recovery from phone through app.
STEPS:
1) Download recovery flasher utility.apk
download link
2) install the recovery flasher utility.apk file.
3) download your preferred recovery.img
4) copy the downloaded recovery.img file to sd-card and place it in ROOT of your sd-card (Don't keep the file inside any folder because the app may not recognize the file)
5) rename the downloaded recovery.img file as recovery.img(all in lower case)
6) Open the app and flash the recovery by pressing the "install recovery" button (Please be patient, wait for the complete flash, wait till you get the display "reboot into recovery")
7) done!!! :good: enjoy your new recovery.:victory:
(note: this method worked very well for me, app flashed recovery within 2sec, and i am not responsible if it wont work for you or anything is messed up.)
:victory: hit :good: if this guide was helpful. :highfive:

.apk to flash recovery
Is there any way to find the success of flashing ?

cvpillai said:
Is there any way to find the success of flashing ?
Click to expand...
Click to collapse
yes mate, after flashing through app, the app will show reboot into recovery. after that just boot into recovery(manually).
hit thanks if i helped :highfive:

does it work on all rooted mobiles
aashking said:
HEY FOLKS,
This THREAD will GUIDE you to flash recovery.img from PHONE.
I found many of the people found difficult to flash recovery via FASTBOOT and TERMINAL EMULATOR by using CODES.
Here is a SIMPLE method to flash recovery from phone through app.
STEPS:
1) Download recovery flasher utility.apk
download link
2) install the recovery flasher utility.apk file.
3) download your preferred recovery.img
4) copy the downloaded recovery.img file to sd-card and place it in ROOT of your sd-card (Don't keep the file inside any folder because the app may not recognize the file)
5) rename the downloaded recovery.img file as recovery.img(all in lower case)
6) Open the app and flash the recovery by pressing the "install recovery" button (Please be patient, wait for the complete flash, wait till you get the display "reboot into recovery")
7) done!!! :good: enjoy your new recovery.:victory:
(note: this method worked very well for me, app flashed recovery within 2sec, and i am not responsible if it wont work for you or anything is messed up.)
:victory: hit :good: if this guide was helpful. :highfive:
Click to expand...
Click to collapse

abhi1607 said:
Click to expand...
Click to collapse
Hopefully it should work in all rooted devices
Hit thanks if i helped :good:

[MediTek][New[[boot-logo] Amazing Boot Logo for Mediatek Devices

Hi everyone.
Nice to meet you all
Here i am presenting some boot logos for android MediaTek Devices
Which You will really like....
Which one is easy to apply more than your thought....!!!
HIT THANKS IF YOU LIKES IT
**I AM NOT RESPONSIBLE FOR ANYTHING HAPPEND TO YOUR DEVICE OR TO YOUR SDCARD
** DO IT AT YOUR OWN RISK
Lets Go
Click to expand...
Click to collapse
REQUIRMENTS
1.A rooted MediaTek Device
2.CWM/TWRP recovery
INSTRUCTION
1.Download zip file from the link given below.
2.Keep file in your sdcard
3.Reboot your device into CWM/TWRP recovery
4.Go On INSTALL ZIP FROM SDCARD
5.Now find the zip file and flash it.
Thats it
ENJOY....!!
DOWNLOADS
--------------------Sony logo--------------------------------
https://drive.google.com/file/d/0B_ex3Gw451S-d2dBNmlSX0lzRGc/view?usp=docslist_api
--------------------Iphone Logo-----------------------------
https://drive.google.com/file/d/0B_ex3Gw451S-bVNsMHlveEpkanc/view?usp=docslist_api
-------------------Micromax Logo-------------------------
https://drive.google.com/file/d/0B_ex3Gw451S-U2pIVndDR1Zqcm8/view?usp=docslist_api
------------------------X logo--------------------------------
https://drive.google.com/file/d/0B_ex3Gw451S-UnhNTmltMThTLTg/view?usp=docslist_api
---------------------FranGo logo----------------------------
https://drive.google.com/file/d/0B_ex3Gw451S-RmV6a010azh2UnM/view?usp=docslist_api
--------------------Lenovo logo-----------------------------
https://drive.google.com/file/d/0B_ex3Gw451S-dTJFMTFQNmtQZjA/view?usp=docslist_api
-------------------Samsung Logo---------------------------
https://drive.google.com/file/d/0B_ex3Gw451S-c1o2TmMwQTdJXzg/view?usp=docslist_api
---------<3-------Keep calm logo----------<3--------------
https://drive.google.com/file/d/0B_ex3Gw451S-QkwtLUpSOFFzMjA/view?usp=docslist_api

SlimFresh_v6_Lollipop for unite-2 a106 kitkat based

FLASHING PROCEDURE :
1) BOOT INTO CUSTOM RECOVERY. (CTR ,CWM,PHILZ)
2) WIPE ALL (SYSTEM,CACHE,DATA,DALVIK CACHE).
3) NAVIGATE TO ZIP AND FLASH IT.
4) REBOOT AND ENJOY.
SS link(.rar file)-https://docs.google.com/uc?id=0B5bbPmY0Z0AHbXZydHZQYm12SVk&export=download
rom link-https://docs.google.com/uc?id=0B5bbPmY0Z0AHRkUtYURNRHIwSGM&export=download

Nice and commendable works

paeffiong said:
Nice and commendable works
Click to expand...
Click to collapse
thank u

Install any A1 Pie Custom Rom on 5X

Hi,
Finally I could find a solution to install Pie rom on mi 5x.
I try to install Pixys Os that find on A1 Page(This).
You Can follow this steps and install this rom on your Device.
1- Downlod Any A1 Pie custom rom.
2- Download payload_dumper-win64.zip From this link.
3. Extract system.img and boot.img from custom rom zip file by 2.
4.Unzip payload_dumper-win64.zip and then Unzip custom Rom and get payload.bin from extracted files then follow this stages in payload_dumper-win64 Folder.
a.Put payload.bin to "payload_input" folder
b.Run payload_dumper.exe
c.Successfully extracted img files are in "payload_output" folder
5- Download GApps: OpenGApps
6- Download and install this TWRP recovery modded treble support for tiffany.
7- copy system.img and boot.img that Extracted from 4 to your Device.
8- copy GApps zip file (from 2 ) to your device.
9- Boot to recovery .
10- Wipe the System, Cache, Data and ART/Dalvik cache.
11- Go to Install menu then press Install image on the bottom of page then Select system.img and flash it to system.
12- Then Select boot.img and flash it to boot.
13- Reboot to Fastboot.
14- Install Oreo Modded TWRP 3.2.1-0 from this link.
15 -Boot to recovery and Go to Terminal menu and run a1to5x command.
16- Reboot to Fastboot.
17- Again install this TWRP recovery modded treble support for tiffany. Unfortunately This version dont have a1to5x command. and we must install 9 for run this command.
18- Boot to recovery .
19- Install Gapps and Magisk.
20- Reboot your device.and Enjoy.

How's battery life on this rom?

zsolthajdu said:
How's battery life on this rom?
Click to expand...
Click to collapse
Good like Oreo Rom AEX.

does this rom must flash A1 Firmware or not?

Matt RJ said:
does this rom must flash A1 Firmware or not?
Click to expand...
Click to collapse
Yes. For fingerprint in all A1 roms you must flash A1 firmware.

I have bug when I swipe home buuton at the homescreen it's opening to the drawer.
did you face same problem with me?

Its rom stabil? Or have bug?

I'll be waiting till it fully stable and everything op said is fine , and easier to install . Currently I don't have a computer lol , cant risk . About purely installing .img file and I can't do anything fastboot thing atm, ....suck

Jackson EH said:
I'll be waiting till it fully stable and everything op said is fine , and easier to install . Currently I don't have a computer lol , cant risk . About purely installing .img file and I can't do anything fastboot thing atm, ....suck
Click to expand...
Click to collapse
Though its a good decision bro cz u've to flash recovery twice via cmd. bt in my case rom is 95% stable. facing only 1 bug tht whenever i want to enter into battery option it says force closes

ghtam said:
Though its a good decision bro cz u've to flash recovery twice via cmd. bt in my case rom is 95% stable. facing only 1 bug tht whenever i want to enter into battery option it says force closes
Click to expand...
Click to collapse
You have bug when you swipe up on homescreen?

RDFARHAN said:
You have bug when you swipe up on homescreen?
Click to expand...
Click to collapse
no bro. swiping up to home screen is absolutely perfect for me

ghtam said:
no bro. swiping up to home screen is absolutely perfect for me
Click to expand...
Click to collapse
I follow step by step from the instructions but the device not boot into system, stuck on mi Logo and reboot all the time, any solution?

am2000 said:
Hi,
Finally I could find a solution to install Pie rom on mi 5x.
I try to install Pixys Os that find on A1 Page(This).
Can i install the latest version of pixys-OS system & boot by following ur instruction?
Click to expand...
Click to collapse

ghtam said:
am2000 said:
Hi,
Finally I could find a solution to install Pie rom on mi 5x.
I try to install Pixys Os that find on A1 Page(This).
Can i install the latest version of pixys-OS system & boot by following ur instruction?
Click to expand...
Click to collapse
Yes, You can install any A1 Custom Pie rom by this solution.
But you must extract system.img and boot.img from custom rom.
Click to expand...
Click to collapse

am2000 said:
ghtam said:
Yes, You can install any A1 Custom Pie rom by this solution.
But you must extract system.img and boot.img from custom rom.
Click to expand...
Click to collapse
can i copy & paste system/boot from zip file to extract?
Click to expand...
Click to collapse

ghtam said:
am2000 said:
can i copy & paste system/boot from zip file to extract?
Click to expand...
Click to collapse
edit post 1 and describe how install any custom rom
Click to expand...
Click to collapse

امتحان نکردم ولی ایولا داری.خوشم اومد داداش

xp7 said:
امتحان نکردم ولی ایولا داری.خوشم اومد داداش
Click to expand...
Click to collapse
قربونت داداش

ایول مشتی
سلام. دمت گرم :good:واقعا عالی.
فقط یه سوال.
فقط اندروید پی یا اورو هم میشه؟

Pixel experience Rom [9.0]for mi 5x is out now, u can install like other custom ROMs.

Question are there any custom recovery that's compatible with a125m?

i've been looking for one everywhere but i cant really find one..
but if someone tells me how to like make a twrp for it (the latin variant), it'd be nice
thank you!

so, are there any news about this?

kalii_ said:
so, are there any news about this?
Click to expand...
Click to collapse
Nobody supports or develops for that variant of the A12. The only time was a custom recovery, that was abandoned and doesn't work anymore.

kalii_ said:
so, are there any news about this?
Click to expand...
Click to collapse
Nevermind... Ask @physwizz for your version.

TheWorldYT said:
Nevermind... Ask @physwizz for your version.
Click to expand...
Click to collapse
[AOSP-11] [OFFICIAL] Samsung SM-A125F TWRP
DISCLAIMER: I WAS NEVER, HAVE NEVER BEEN, AND WILL NEVER BE RESPONSIBLE OF ANY DAMAGES AGAINST YOUR DEVICES BY YOUR OWN MIS-OPERATIONS Install instructions: 1. Download an arbitrary SM-A125F firmware zip package on SamMobile.com, whose Android...
forum.xda-developers.com
If it doesn't work I can easily modify it

physwizz said:
[AOSP-11] [OFFICIAL] Samsung SM-A125F TWRP
DISCLAIMER: I WAS NEVER, HAVE NEVER BEEN, AND WILL NEVER BE RESPONSIBLE OF ANY DAMAGES AGAINST YOUR DEVICES BY YOUR OWN MIS-OPERATIONS Install instructions: 1. Download an arbitrary SM-A125F firmware zip package on SamMobile.com, whose Android...
forum.xda-developers.com
If it doesn't work I can easily modify it
Click to expand...
Click to collapse
well, it doesnt work for me sadly, since the A125F model is a little different from the 125m, itll just start rebooting. if you can make a modifed version for it, ill glady test it for you. the firmware that i got is the ZTO A125MUBU3BVG6
Thank you

kalii_ said:
well, it doesnt work for me sadly, since the A125F model is a little different from the 125m, itll just start rebooting. if you can make a modifed version for it, ill glady test it for you. the firmware that i got is the ZTO A125MUBU3BVG6
Thank you
Click to expand...
Click to collapse
Send me your stock recovery.img.lz4
And I'll see what I can do

physwizz said:
Send me your stock recovery.img.lz4
And I'll see what I can do
Click to expand...
Click to collapse
here it is:
recovery.img.lz4
Download recovery.img.lz4 for free from KrakenFiles.com
krakenfiles.com

kalii_ said:
here it is:
recovery.img.lz4
Download recovery.img.lz4 for free from KrakenFiles.com
krakenfiles.com
Click to expand...
Click to collapse
Ok

kalii_ said:
here it is:
recovery.img.lz4
Download recovery.img.lz4 for free from KrakenFiles.com
krakenfiles.com
Click to expand...
Click to collapse

thank you for the response, but unfortunally it soft bricks and won't boot past the boot screen. is there a way i can help to make it work?

hey, i've found the issue, i gave you the wrong file, sorry about that. if you got paypal maybe i can send you 5 dollars just to compensate you for my mistake...
thank you
@physwizz

kalii_ said:
hey, i've found the issue, i gave you the wrong file, sorry about that. if you got paypal maybe i can send you 5 dollars just to compensate you for my mistake...
thank you
@physwizz
Click to expand...
Click to collapse
Lol.
I don't take money

physwizz said:
Lol.
I don't take money
Click to expand...
Click to collapse
well, alright. just wanted to support you

kalii_ said:
well, alright. just wanted to support you
Click to expand...
Click to collapse
I do this for fun and to keep my old brain active
Unzip to get the tar file.
Installing instructions in next post

Installing Custom Recoveries
A. Preparation.
1. Download firmware for your device
2. Extract ap file using Zarchiver and extract recovery.img from recovery.img.lz4 and compress it to recovery.tar
3. Patch the ap file with a magisk which will patch both boot.img and vbmeta.img (from magisk, choose install then select file to patch)
Exynos 850 Resources
t.me
Alternatively you can extract boot.img.lz4 and vbmeta.img.lz4 from the ap file and compress them into a new tar file and then patch that file.
note: if you don't want root then just extract the vbmeta.img and use zarchiver to add it to my twrp.tar file.
You can flash this new file from odin at step 5
For Exynos 850 android 11 use a21s patched magisk.
For Exynos 850 android 12 and most other devices use delta magisk
4. Unlock OEM in developer options
5. Attach phone to pc and reboot to download mode
6. flash patched ap file.
Or..
Extract boot.img and vbmeta.img and add them to the TWRP zip.
7. Download recovery.img or download twrp.tar and extract recovery.img using Zarchiver.
B.Installation
Method 1.
1. Connect to pc and boot into stock recovery
2. Factory reset
3. Reboot into download mode.
4. flash twrp.tar into the ap slot
5. reboot to recovery
6. Advanced, terminal. Type multidisabler (twice).
7.
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
8. Reboot to recovery from main menu (not just reboot)
Backup boot, data, super and dtbo
9. Reboot to system
Method 2.
If you have already installed recovery and decrypted.
Extract recovery.img
1. Boot to recovery.
2. Install recovery.img
3. Choose recovery partition
4. Reboot to system then reboot to recovery
Backup boot, data, super and dtbo
(For Pitch-black just install the zip)
Method 3.
1. Install TWRP app
Extract recovery.img
2. Install TWRP
3. Choose file to flash.(don't select device)
4. Select recovery.img.
5. Reboot to recovery.
6. (You may need to change data partition to ext4 first if format ruins your system)
7. Reboot to recovery.
8. Wipe, format data, type YES.
9. Advanced, terminal.
10.Type multidisabler (twice).
Or flash samsung multidisabler zip
Or, for older phones flash dmverity zip
11.Reboot to recovery
12. Flash Magisk for root(only for method 3)
13. Backup boot, data, super and dtbo
Method 4
Using a second phone
Physwizz Collection
To flash TWRP from phone1 to phone2 Only if you have already installed recovery and decrypted. 1. Install this termux on phone1 2. Setup storage termux-setup-storage 3. Install this Heimdall Magisk module on phone1 Or install chroot Linux on termux and then install heimdall 4. Copy...
t.me
C. Recovery Problems
Most recovery issues can be solved by attending to the following issues.
1. Did you root using the full ap file patched Magisk .
(This contains the patched boot.img and vbmeta.img)
Exynos 850 users must use the special a217 magisk?
2. Did you then go all the way through the setup process?
3. Did you download the recovery to match your baseband?
See https://t.me/a127f_res/54 for Exynos 850 recoveries
4. Did you hold down power and volume up after Odin says pass?
5. Did you format data from stock recovery?
If you forgot to do this, just install stock recovery.img from TWRP and reboot.
6. Did you type multidisabler twice?
7. Did you reboot to recovery by choosing reboot from the menu and then choosing recovery?
8. To avoid touch issues go to settings and untick "allow time out"
D.To restore Stock Recovery
1. Attach phone to pc and reboot to download mode
2. flash patched ap file or stock recovery.tar
3. reboot
Or just flash stock recovery.img from twrp and reboot.
@physwizz