Today I've installed BlissOS 14.3 on my old laptop, Dell Studio 1555 and it's not booting up. Before installing BlissOS 14.3, I've installed the vanilla Android x86 which is from android-x86.org and I've tried: Android 7.1, CM 14.1, Android 8.1 and Android 9.0. All of them aren't booting up and some of them will just stuck at the console and I tried editing the menu.lst file, like setting it to "nomode set xforcevesa" or it will just reboot after booting every mode which is provided in the grub (like BlissOS). I've also tried the LineageOS 17.1 from BlissDev's sourceforge but it's also the same as the BlissOS I tried. Is there any reason that why is it not booting up? PS. I installed Linux (Ubuntu) and also Windows 10 2H21 and they also booted up normally.
Info about how I install:
Create bootable USB using Rufus 3.20 and select USB Storage to boot in the BIOS.
Rufus Configure:
MBR, Quick Format, Fat32
Related
Tablet with dual OS:Android 4.4.4 and Windows 8.1 32bit
I wanted to delete android OS and keep only Win OS.
I deleted android OS partitions but when I tried to merge partitions on Windows OS,something went wrong and the tablet does not boot normally,any more.
Every time I try to boot,Aptio Setup Utility launches and nothing else happens.
Please help me to install windows 8.1 OS again.
I attached a foto
Regards
Duplicate
http://forum.xda-developers.com/general/help/boot-problem-icube-8-3g-tabletdual-os-t3161449
Tablet with dual OS:Android 4.4.4 and Windows 8.1 32bit
I wanted to delete android OS and keep only Win OS.
I deleted android OS partitions but when I tried to merge partitions on Windows OS,something went wrong and the tablet does not boot normally,any more.
Every time I try to boot,Aptio Setup Utility launches and nothing else happens.
Please help me to install windows 8.1 OS again.
I attached a foto
Regards
I've downloaded the ISO for Bliss OS 11.13 (64bit for Intel Atom processor), created a Live USB using Rufus on Win10 and am trying to figure out how to install it to the my Dell Venue 8 7840 (running Android 5.1, unlocked and rooted). But the installer doesn't recognize there's an android tablet connected via usb.
I've ensured that the my Dell Venue 8 7840 (unlocked, rooted running Android 5.1) has both the MTP Dell drivers as well as the ADB drivers in Windows 10 and I can launch a terminal and run typical ADB/Fastboot commands and the device responds.
I've tried using all of the available "Allwinner" usb tools (PhoenixSuit, Phoenix USB Pro and LiveSuit) but none of these will accept the iso file I've downloaded directly from the Bliss OS site. Am I doing something wrong? My tablet isn't supported by CWM/TWRP or any of the major custom ROMS (LineageOS etc) so I can't update passed the current Android 5.1 as Dell no longer manufactures Android tablets.
Please tell me if anyone has been able to successfully install Bliss OS on an Intel Atom based Android tablet
Thanks
any update on this?
Hello Community!
I am asking myself it is possibe to direkt boot a debian ARM Port or ARCH Linux ARM Port (maybe from SD Card) on my Smartphone? I saw lots of videos booting a Linux on Top of Android but i would like to "natively" run a OS. Where a Custom ROM typically has drivers for a special type of device i am thinking if a very generel distribution could detect most of the devices hardware...
Any Ideas if this would be possible?
AFAIK it's not possible.
Can you give me a (detailled) hint why you think this would not work?
When reading the informations: https://archlinuxarm.org/about/downloads
The released downloads are designed for the specific systems above; however, our package repositories work with any ARM device compatible with ARMv5, ARMv6, ARMv7-a, or ARMv8-a AArch64 instructions.
In TWRP i can select Storage - maybe starting from TWRP command line a image start from SD Card would be possible?
You initially said your goal is to completely replace Android by Linux ( ARCH Linux - what is for tablets only ) on a smartphone, IIRC.
Now you say you want to run Linux ( ARCH Linux ) on top of Android. Confused ...
hello! i meant that my smartphone can start the TWRP bootloader and from there the boot process could be (maybe) handed over to an image at the SD card....
thats the idea... ;-)
TWRP is a Custom Recovery means a restricted Android OS ( like Windows RE for Windows machines), not a bootloader ( what is comparable to UEFI / BIOS on Windows machines ).
The Android bootloader starts the recovery mode and the kernel, which then starts the operating system of your smartphone.
HW: x86 PC (intel integrated graphic card + NVIDIA graphics card)
SW: Blissos 14.3 (since nvidia card is poorly supported on x86 android, in android-x86_64_defconfig, comment out all NOUVEAU related configs)
Prerequisite: In BIOS, video setup -> IGD (expect to use intel graphic card)
Steps:
1) Install Ubuntu 20.04
2) Use rufus to write .iso image into U disk
3) Insert U disk into x86 PC, reboot x86 PC
4) From boot options, if choose 1st option to start Blissos directly // it's OK to start
5) From boot options, if choose installation of blissos // Why?? display screen is black, can't see any log output, after a while, blocked here, have to ctl+alt+del to reboot system
6) Power off x86 PC, unplug the NVIDIA graphics card
7) Start X86 PC again, it's OK to install Blissos!
8) Power off x86 PC again, plug the NVIDIA graphics card
9) Start X86 PC again, it's still OK to install Blissos!! // Why??
QA:
In step 5, since display screen is black, can't see any log output, it's difficult to know what is happened, could you please check it and give some comments?
After step 6 ~ step 9, if NOT change BIOS to default setting, it's OK to install Blissos for further installations,
for my special enviroment, NVIDIA graphics card of most x86 PCs can't be unplugged, how can I handle this case?
Dear experts, @electrikjesus and @HMTheBoy154 , could you have a look at this issue? thanks a lot