So in the year of Christ 2022, is there still any sort of way to output video on a Pixel 2?
Story goes so that I have one with a completely busted screen, that does not register anything at all, let alone show anything. Glass broken, touch screen broked. I read there's some sort of a solution, but it requires an app to be downloaded which obviously is impossible in this case.
Is there any solution besides getting this piece of junk fixed?
I was able to use USB adapter to HDMI (not DisplayPort over USB-C alt mode, but older DisplayLink technology over USB 2, plus adapter to USB-C, normally used for adding extra monitors to laptops etc), but it required a DisplayLink app, not sure if it downloaded it automatically or not but I typically install apps from Google App Store remotely, on a PC browser (and select my phone as the target). A mouse should also work with Android but you'll need USB hub, or a bluetooth mouse, so yes in theory it will work but not for DRM content like Netflix, and not sure about booting up, perhaps you can blidnly use external keyboard for PIN or password.
Edit: USB docks for laptops, with HDMI and more USB ports, also use the DisplayLink technology and may be worth a shot
Related
Long time viewer, first time posting.
I'm a science teacher and I use a galaxy note 10.1 (original) to do my lectures and I project the image on the screen with allshare cast. The problem is, our school has old projectors with no HDMI and only XGA resolution. Up until now, I have been using an HDMI --> DVI cable which displays the image clearly. The problem of course is that there is no sound. I don't need sound most of the time, so I've been getting by without it.
However, after reading a few threads on here I found that people had success using allshare with the Cable Matters active HDMI --> VGA with audio cable on amazon. So I picked up one of those. I connected the cable and sound, made sure to power it with the usb cable, and it shows up with just a black screen. No matter what configuration it is in, it just shows a black screen. When I pull the HDMI cable out of allshare and put it into a laptop (acer chromebook), the image displays on the screen fine. So the VGA cable and adapter both work.
Allshare works on the projector with DVI, but not VGA, whereas a laptop works with both on the same projector. Any help?
Does that HDMI-VGA adapter support HDCP? I'm pretty sure there's been a change to the ASCD to require HDCP support on the "display" end.
kcrudup said:
Does that HDMI-VGA adapter support HDCP? I'm pretty sure there's been a change to the ASCD to require HDCP support on the "display" end.
Click to expand...
Click to collapse
I did see that, though I'm still on the old LJ02 firmware and furthermore the others I've heard with hdcp issues received a message saying that the device was not hdcp compatible. In my case I cant even see the allshare cast instruction screen (it's black) but I CAN see the dongle on my device and connect.
Working on a project to turn my phone into a desktop without a need for too specialized adapters and without root. Using my LG G5 for testing this. Have a MHL USB Type C adapter that contains USB, HDMI, and Type C in (charging). The setup works well, and I'm able to hook in my keyboard, monitor, and mouse perfectly. Screen resolution is slightly cut off on the top and bottom edges. It seems to mirror the display of my device. Could imagine it troublesome for taller phones like the S8.
This can be fixed without root, as you can give Sentio Desktop permissions to edit the display settings.
HOWEVER, I don't see anyway to turn off the display when plugged into the adapter and keep running the same.
This is more of a long-term problem. Having the screen on for extended period of time will cause heat issues, not to mention wear on the screen.
Is there any kind of way to turn off the phone's display when hooked in, akin to closing the lid on a Mac when hooked to a monitor (without root preferably)?
Did you ever find out how to do this? Bugs me too!
Hello everyone,
I would really like some help advice/experience from other here regarding the HTC U11. I was just using the device normally one day and the screen went black completely. I think the touch screen is dead as well, as it doesnt seem to respond when I attempt my usual pattern unlock from muscle memory. I am sure the device is still working normally as I had... accidentally connected to emergency operators, could still use Whatsapp Web and my PC does show HTC U11 but I am unable to change the option to MTP to transfer my files.
Does anyone have any advice on how I can access my data through enabling usb debugging/ changing the connection mode to MTP? Apart from repairing the screen only.
While I am not sure about the software options. I am attempting to output using a Type C to HDMI hub to output display and use a mouse to access the phone. Since it was rather hard for me to find answers about the compatibility and usage so I was hoping to get some experiences so can quickly attempt this method when the few cables I purchase arrive.
1) Are these type C to HDMI cables generic? I have seen some articles saying there are type C to hdmi with MHL and others with digital output and I confused if those I bought will work with the U11. (Seller says works to Macbook, Xiaomi, Huawei P20)
2) Are these adapters simply plug and go? Do I have to unlock the screen or install any firmware (as I clearly dont have a screen haha..)? Does this apply for both the HDMI output and using a mouse
3) Would I specifically need a SMART TV with HDMI to get output out or any monitor with HDMI would work fine?
If anyone have a working U11 and using HDMI to Type C would really love to hear from you!
Thank you for any advice/experiences in advice!
Hi
I have Galaxy Ace 4 (kitkat 4.4) with broken lcd. The screen is blank but touch should work. Earlier something was visible on screen and as I remember touch was working.
Moreover, the system had some failure due to permanent "application xxx stopped working" and factory reset should be made.
I would like to use this phone as wifi hotspot. Is there any way to access the phone after factory reset? I have found application like Visor to control android via usb on pc. But developer mode has to be enabled and I'm not sure if system should be rooted.
Thank you for any help
If you can still see the screen, but the touch screen does not work:
Buy a cheap USB adapter so you can connect a PC keyboard or mouse (probably a USB C to USB A adapter). You can buy these adapters from China on eBay for $ 1 (but you may have to wait a month until they arrive in the mail. In this case, buy from a seller in your own country). I suppose you have a keyboard or just use the keyboard and use the arrows to move and select things, so I think the Windows button will become the home button. Press Enter to select and Escape to return. Or you can simply point and click with the mouse. The problem is that not all phones support "OTG", so you may not be able to read the adapter. If so, then I think you have no other choice. . But most of the stores themselves definitely support 100% OTG, so it should work normally. The problem with Bluetooth is that you need to pair it first, which requires touching the screen. Therefore, if you cannot touch the screen, using a Bluetooth mouse or keyboard may not work
If you can't see the screen, but the touch screen works normally:
Unless you change the screen, don't think that there are many things you can do. Android phones that were previously compatible with MHL allow you to use a dongle to connect it directly to HDMI. But the cell phone no longer has that function. If you have a Samsung phone, I think you can buy a Samsung Dex docking station, which will allow you to connect it to the screen via HDMI. If you can install applications on your phone, you may be able to control your phone from your computer using a screen mirroring application (there are thousands of different software that can do this, but you need to install applications on your phone). Same as Google Chromecast screen mirroring. .You need to access the application on your phone to perform this operation. Therefore, there is nothing you can do except replace the screen. If you are lucky and your smartphone supports some type of HDMI dongle adapter or some type of desktop docking station with HDMI output, you can view the phone's screen and access it.
My Samsung S9 has had some screen damage and the touchscreen mostly does not work.
In order to navigate it I must use a mouse that I connect to the phone using the supplied USB C- A adapter.
I wish to get my phone repaired but I wish to backup all the data upon it first.
If I plug my phone directly into my PC, it asks for my permission to allow the PC access. However, since the touchscreen does not work properly, I cannot press the button to accept.
I could not plug both the mouse and PC simultaneously.
So I bought a USB-C hub. (Actually I've bought several, none of them have worked, this latest one is the most expensive and I had hoped it would work - (https://www.amazon.co.uk/gp/product/B07ZVKTP53/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1).
It has a separate port for USB-C Power Delivery and a separate one for data.
I plug the attached USB-C cable from the hub into my phone, and then I plug my mouse into a regular USB port, my charger into the USB-C PD port, and another USB-C to A cable from the USB-C Data port on the hub into a USB port at the back of my (new) PC.
Now my computer does not recognise my phone at all, nor does my phone seem to acknowledge it is connected to a PC. The mouse still works upon the phone and it charges fine through the PD port. If I plug the phone straight into the PC, it is recognised, so I do not think the problem lies there. The hub seems to block communication between the phone and PC.
I would like to backup my data and get my phone repaired. If anyone can solve the USB-C Hub issue or propose another solution to my problem then I would be grateful.
A mouse and keyboard will take priority over anything else in a hub.
I'm betting the hub's power is 2000mA or 2.0 Amps.
What does your fone charger state its power is? Add the mouse, keyboard, and fone's milliamps together. If it's more than the hub's power pack supplies....
In this situation, I would use Vysor, this will defo solve your problem, it allows you work with your fone on your pc/lappy by providing a lovely window that is a duplicate of your fone screen, you'll be glad you found this!!!
I can provide an old cracked version I used for my emergencies, if there is no objections?
Then you'll only need the mouse to use as your finger
Google Vysor. case closed lol.
Pachacouti said:
A mouse and keyboard will take priority over anything else in a hub.
I'm betting the hub's power is 2000mA or 2.0 Amps.
What does your fone charger state its power is? Add the mouse, keyboard, and fone's milliamps together. If it's more than the hub's power pack supplies....
In this situation, I would use Vysor, this will defo solve your problem, it allows you work with your fone on your pc/lappy by providing a lovely window that is a duplicate of your fone screen, you'll be glad you found this!!!
I can provide an old cracked version I used for my emergencies, if there is no objections?
Then you'll only need the mouse to use as your finger
Google Vysor. case closed lol.
Click to expand...
Click to collapse
Hi
Thanks for your reply
It's not a battery hub, but just a USB-C hub (check the link). Power comes from the PD USB-C port which is hooked up to my phone's original USB-C charger.
It also fails to work even when a mouse isn't attached to it.
I will look into Vysor. Also thought about the possibility of using a standalone bluetooth mouse which would free up the cable.
Your fone will suck the life out of a poorly powered hub, by using vysor, your pc/lappy mouse will work your fone using vysor, best app I've ever seen for working with broken screens, just plug phone direct into lappy, vysor works if you've no screen at all!!!!!
Use
Vysor
www.vysor.io
...Njoi
Dont pay for mouses/hubs in this scenario. Just pay for a top quality tool. I would place this as my number one android tool for ANY fone.
Again, if all your doing is data recovery (saving your stuff) I have a patch for an earlier version to unlock full version I swear by, you could use this once if only to try before you buy
The hub supports 85W fast charging directly from mains, which is what it is getting.
How do I enable USB debugging specifically for the app?
I have enabled it in developer options but when I connect my phone via USB to my computer as per the Vysor app, another window pops up on my phone asking to allow USB debugging. Ask there is no mouse attached to the phone at this point, I am unable to allow it.