Question A125U dump - Samsung Galaxy A12

Anyone able to run MTKclient and get a full firmware dump? Trying to do a scatter flash to unbrick mine but I'm still missing tons of bin files to do a full flash and can't find any to use to build new ones

R0GUEEE said:
Anyone able to run MTKclient and get a full firmware dump? Trying to do a scatter flash to unbrick mine but I'm still missing tons of bin files to do a full flash and can't find any to use to build new ones
Click to expand...
Click to collapse
you can find scatter fw at androidfilehost

rooseek said:
you can find scatter fw at androidfilehost
Click to expand...
Click to collapse
I'm aware, I can also manually extract scatter files from a stock firmware, but those barely make up half of the complete list of partitions. Problem is, some of the unincluded partitions are corrupt.

Related

Nokia 3 TA-1032 Official firmware with SP Flash tool

Hello guys
I found a simple firmware for Nokia 3 TA-1032
This can be flash Nokia 3 using SP flash tool
Here is the link for Download
https://mega.nz/#!FMpHVYpZ!mNVx6Ifr6z6YpslP-F4kLBs1ldfuiZEiZOjQATgORWg
For patch thanks to @Riadh300
http://www.mediafire.com/file/r8rp0agqpnqb8ba/DA_SWSEC_CRYPTO20.bin
sltushar said:
Hello guys
I found a simple firmware for Nokia 3 TA-1032
This can be flash Nokia 3 using SP flash tool
Here is the link for Download
https://mega.nz/#!FMpHVYpZ!mNVx6Ifr6z6YpslP-F4kLBs1ldfuiZEiZOjQATgORWg
Click to expand...
Click to collapse
is this for single sim or dual sim or both?
freaks211 said:
is this for single sim or dual sim or both?
Click to expand...
Click to collapse
Its for TA-1032, both
Do you know how we can convert the other flash files for the official flash tool to sp flash tools? If I had a scatter file I could use my device and upload the rom from the device to make a SP flash tool compatable image.
JakesDen said:
Do you know how we can convert the other flash files for the official flash tool to sp flash tools? If I had a scatter file I could use my device and upload the rom from the device to make a SP flash tool compatable image.
Click to expand...
Click to collapse
I downloaded the link he shared ,it has a scatter file inside, is that what you need?
JakesDen said:
Do you know how we can convert the other flash files for the official flash tool to sp flash tools? If I had a scatter file I could use my device and upload the rom from the device to make a SP flash tool compatable image.
Click to expand...
Click to collapse
Yes it can be, if you can extract the .nb0 file then you can browse the firmware images according to the scatter files, but as i saw .nb0 file is not exctractable due to encryption, and OST tool can descypt it but its can only flash not extract
Why dont you flash through provided firmware
I might reverse engineere OST later if I have time.
Can you send me the scatter file?
Using mobile data atm so don't have enough data spare to download anything else.
sltushar said:
Its for TA-1032, both
Click to expand...
Click to collapse
how about the one for TA-1020, mt6735
kenneth.mtika said:
how about the one for TA-1020, mt6735
Click to expand...
Click to collapse
You can flash diffrent varient on diffrent varient of nokia 3 devices
Has anyone actually flashed this firmware? We've already had instances of people flashing a supposed custom rom and bricking their phones. I think care needs to be taken before trying this kind of stuff - especially when it comes to Nokia phones
Confirmed
That's work on my device with patched download agent..
Riadh300 said:
That's work on my device with patched download agent..
Click to expand...
Click to collapse
Can u share the patch
http://www.mediafire.com/file/r8rp0agqpnqb8ba/DA_SWSEC_CRYPTO20.bin
download it and and put it in spflashtools
2 put your firemwre and click download
3 quickly press power button and volume up and insert cable
working 100%
Nokia
my nokia 3 vibrated, but when flashing it only remains black and no longer vibrates only remains in black
hi ... the master can you give me the suitable auth file for my phone nokia 3, my phone is hardbrick. i tried recovering with sp flash tool using AUTH FILE but it did not solve the problem of AUTH FILE ERROR and so on, help me master ... ?? help me, before thanks ..
D32n said:
hi ... the master can you give me the suitable auth file for my phone nokia 3, my phone is hardbrick. i tried recovering with sp flash tool using AUTH FILE but it did not solve the problem of AUTH FILE ERROR and so on, help me master ... help me, before thanks ..
Click to expand...
Click to collapse
What version of spflashtool are you using?
redweaver said:
What version of spflashtool are you using?
Click to expand...
Click to collapse
I use sp flashtool v 15.1824
How to install?
My phone is stuck on no command. please share how can I install this rom.
Whats The Advantage Of Flashing This File
can't boot.
reboot loop,no screen.

[REQUEST] TWRP or Stock boot.img

I want to install the Magisk but not achieved yet because of TWRP is not available and the stock boot.img not found.
Now OTA is coming(1.02.709.7), so I tried to obtain boot.img from the OTA image by the following steps but didn't succeeded.
Download the OTA image by checking the system update on the device.
The image will be stored on /sdcard/Download/OTA_1.01.709.1-1.02.709.7.zip
Copy the OTA image to PC and extract the file "payload.bin".
Use the payload dumper(Thanks to vm03), dump the boot partition from payload.bin but failed with the following error.
Processing boot partition.Unsupported type = 9
* Type of 9 is IMGDIFF according to what I found (no further info).
* I modified "payload_dumper.py" to dump only the boot partition.
Could someone please share the stock boot.img or TWRP for this device?
or tell me another way to achieve this.
Thanks.
I'm looking for it, too. :crying:
Did you get the 1.03.709.1 version boot.img file?
I don't think OTAs contain the whole boot.img, only the binary diff of the new version.
so far nobody has found a boot.img ? the device is around for some months now...
Is there still nothing? Not even a boot.img?
I will post my stock boot.img, recovery.img, and SW version # once I get to my computer.
Should be able to extract it with ADB/commands.
I'm not able to get anything using ADB/fastboot and no root method is working for me. I wish I had an OTA file to work with so I could patch the boot.img and try that but OTAs have already been done on this phone.
The only thing I've managed to do is unlock the bootloader.
Here is a copy of the OTA zip I'm running on
https://drive.google.com/file/d/122ky9if8FqTKz0tvqVi_8-FkA-GjHX9A/view?usp=drivesdk
And here is the payload.bin from that OTA
payload.bin
drive.google.com
So far I haven't managed to get the boot.img and I have a long day tomorrow. Maybe you guys can come up with something?
Well I downloaded the automated script version of payload dumper located here:
How to extract payload.bin from OTA update or firmware
In a few rare cases, you may need to extract the payload.bin that is part of firmware and OTA update files from some OEMs to get the stock boot and system images. This helps when you are looking un…
nerdschalk.com
And that payload.bin seems to only contain abl.img. Nothing else which is unfortunate.
like i've written before, the OTA simply does not contain the whole boot.img - only the binary difference from the previous build.
with only the difference it is not possible to reconstruct a whole boot.img
the only options i see is wait for a RUU or the kernel source to be published
Another OTA came through 227MB, extracted and only thing in there is abl.img again.
is this will work
HTCdev - HTC Kernel Source Code and Binaries
www.htcdev.com
can we find boot.img
Did you get the 1.00.468.1 version boot.img file?
I'll try to port twrp this week.
Just wait for the good news
4096abcd said:
I'll try to port twrp this week.
Just wait for the good news
Click to expand...
Click to collapse
please make one also for htc u20 5g if possibile
lostic-b said:
please make one also for htc u20 5g if possibile
Click to expand...
Click to collapse
Still there's no way to unlock the bootloader of U20

Can't find boot.img for my phone

Hello, I'm trying to root my phone again. I have my bootloader unlocked and was able to find TWRP-3.5.0-9-0-guacamole (image and installer).
But in every tutorial they say you need to have a boot.img. I tried looking for Oneplus 7 Pro OOS 10.0.11 GM21BA but I can't find anything and I am scared to try it with the wrong files.
Does anyone know where I can find it? Or is it safe to flash Magisk only and not the TWRP recovery because I saw somewhere that that would patch your boot.img and it would be safe.
I would like to keep all the files I have on my phone currently so I am asking before I am going to attempt anything lol.
Here is some info about my phone:
Model: GM1913
Build: Oxygen OS 10.0.11.GM21BA
Android: 10
I am trying to follow this tutorial: https://www.xda-developers.com/unlock-bootloader-root-oneplus-7-pro/
In the written tutorial it doesn't say anything about needing a boot.img but in the video the guy is talking about it.
I also was wondering if I have the correct files so far.
with "payload dumper" it can be extracted from the full OTA update file
ghost323 said:
with "payload dumper" it can be extracted from the full OTA update file
Click to expand...
Click to collapse
Yeah I also saw something like this but I can't find how to find the payload.bin file OR the full OTA update file xD
I found a full OTA when putting my build into Google and then limiting search results to only this month.
Then I used payload_dumper to successfully extract the boot.img and now I can follow the tutorial again.
ƪ(ړײ)‎ƪ

[SOLVED] Does Anyone Have a working rawprogram .xml and patch .xml to fix a hard bricked V500N?

EDIT: I don't need this anymore since I've fixed the problem
Mine stuck in EDL mode after I accidentally erased my partitions. I have followed this tutorial for LG G7, but I was unable to generate xml files required to flash the unpacked .dz firmware. I tried to search similar topic in this forum and G8 forum but it's a dead end.
Hi , how did you fix it , please help I'm in the same situation now
Bronnel said:
Hi , how did you fix it , please help I'm in the same situation now
Click to expand...
Click to collapse
wait I will make a tutorial later. What variant of V50 do you have? If it's the sprint variant you can just use this file https://forum.xda-developers.com/t/lg-v50-lost-sn-after-unbrick.4321877/post-85564585
if it's not, you have to extract your .KDZ with KDZtools from the Chinese forum to get the compatible .bin partitions.
Now I need a blank .qcn file to restore my IMEI because my .qcn backup file seems to be corrupted.
I have Sprint V50 unlocked , V450pm
I did use that file and flashed all partitions one by one but still stuck in EDL mode , I cannot reboot to system, I contacted paid service they claim that they can fix my device remotely , it costs 20+ USD , I'm not sure if can trust them
did you use rawprogram and patch xml, can you please show me how to do that?
Bronnel said:
I have Sprint V50 unlocked , V450pm
I did use that file and flashed all partitions one by one but still stuck in EDL mode , I cannot reboot to system, I contacted paid service they claim that they can fix my device remotely , it costs 20+ USD , I'm not sure if can trust them
did you use rawprogram and patch xml, can you please show me how to do that?
Click to expand...
Click to collapse
I only use the rawprogram0.xml - 6.xml in QFIL. Then, it will be in a boot loop condition, but you can access the download mode. Now you have to flash your stock .kdz firmware in the PARTITION DL mode, since the refurbish mode won't work. Though, I'm not sure if the KDZ of your variant is available, as I couldn't find them.
You are right KDZ not available for sprint , and I used rawprogram0.xml - 6.xml but only 0 and 4 are working others are not working it give sahara fail error
Bronnel said:
You are right KDZ not available for sprint , and I used rawprogram0.xml - 6.xml but only 0 and 4 are working others are not working it give sahara fail error
Click to expand...
Click to collapse
I think the Sahara failure is an error of USB connection than an error of the rawprogram files. Usually, if that happens, you need to restart the EDL mode. Maybe you can try flashing other V450 .kdz. For example, V450VM for Verizon.
you saved my life , you are right it was usb connection issue , my device boots to system without issue , but now volume buttons are not working
Bronnel said:
you saved my life , you are right it was usb connection issue , my device boots to system without issue , but now volume buttons are not working
Click to expand...
Click to collapse
you need to find a way to upgrade/downgrade the stock firmware.
If you happen to find a dummy .qcn backup from someone, please notify me. I have a hard time recovering my IMEI.
wibigdog said:
you need to find a way to upgrade/downgrade the stock firmware.
If you happen to find a dummy .qcn backup from someone, please notify me. I have a hard time recovering my IMEI.
Click to expand...
Click to collapse
My V50 is completely restored like new , IMEI is still there. so thank you for your guidance.
There is a trusted service that can restore your IMEI , I contacted them yesterday ,they are very good , they will restore your IMEI if you want , I will PM you their detail
wibigdog said:
wait I will make a tutorial later. What variant of V50 do you have? If it's the sprint variant you can just use this file https://forum.xda-developers.com/t/lg-v50-lost-sn-after-unbrick.4321877/post-85564585
if it's not, you have to extract your .KDZ with KDZtools from the Chinese forum to get the compatible .bin partitions.
Now I need a blank .qcn file to restore my IMEI because my .qcn backup file seems to be corrupted.
Click to expand...
Click to collapse
Pls help i cant find the compatible bin as almost every thread has only for sprint, my phone is korean variant
LawreNczzze said:
Pls help i cant find the compatible bin as almost every thread has only for sprint, my phone is korean variant
Click to expand...
Click to collapse
1. download the Korean KDZ
2. get the rawprogram.xml from the sprint backup
3. download the .exe version of KZDtool here: https://bbs.lge.fun/thread-69.htm. Btw, the link in the tutorial has been outdated, I found the correct URL using Google: https://www.lanzoux.com/ia1u5ub
4. follow the tutorial using google translate to get most of the .img files
5. follow this tutorial https://bbs.lge.fun/thread-75.htm to get the OP.img, because KDZtool won't work for this OP img. You'll need a hex editor.
6. Drag and replace everything in the original Sprint backup with the Korean .img files
7. Flash in QFIL with firehose and the rawprogram files from the Sprint backup
8. You'll finally be able to go into the download mode
9. Now flash the Korean KDZ in PARTITION DL mode, since the refurbish or upgrade mode won't work
wibigdog said:
1. download the Korean KDZ
2. get the rawprogram.xml from the sprint backup
3. download the .exe version of KZDtool here: https://bbs.lge.fun/thread-69.htm. Btw, the link in the tutorial has been outdated, I found the correct URL using Google: https://www.lanzoux.com/ia1u5ub
4. follow the tutorial using google translate to get most of the .img files
5. follow this tutorial https://bbs.lge.fun/thread-75.htm to get the OP.img, because KDZtool won't work for this OP img. You'll need a hex editor.
6. Drag and replace everything in the original Sprint backup with the Korean .img files
7. Flash in QFIL with firehose and the rawprogram files from the Sprint backup
8. You'll finally be able to go into the download mode
9. Now flash the Korean KDZ in PARTITION DL mode, since the refurbish or upgrade mode won't work
Click to expand...
Click to collapse
May i ask where did you get the correct lgup version and v50 dll so i can proceed. Thank you very much for the quick reply
wibigdog said:
1. download the Korean KDZ
2. get the rawprogram.xml from the sprint backup
3. download the .exe version of KZDtool here: https://bbs.lge.fun/thread-69.htm. Btw, the link in the tutorial has been outdated, I found the correct URL using Google: https://www.lanzoux.com/ia1u5ub
4. follow the tutorial using google translate to get most of the .img files
5. follow this tutorial https://bbs.lge.fun/thread-75.htm to get the OP.img, because KDZtool won't work for this OP img. You'll need a hex editor.
6. Drag and replace everything in the original Sprint backup with the Korean .img files
7. Flash in QFIL with firehose and the rawprogram files from the Sprint backup
8. You'll finally be able to go into the download mode
9. Now flash the Korean KDZ in PARTITION DL mode, since the refurbish or upgrade mode won't work
Click to expand...
Click to collapse
Or can you send me the whole process on how you revive your phone? I'm actually a noob and doesnt really know much about anything in here, I'm just hoping to see if I could still use the phone
You guys are fighting a really tough battle. If you’ve unlock your boot loader then android 12 GUI RC is the way to go! Just put your phone in fast boot mode and two flashes and your done.
hooutoo said:
You guys are fighting a really tough battle. If you’ve unlock your boot loader then android 12 GUI RC is the way to go! Just put your phone in fast boot mode and two flashes and your done.
Click to expand...
Click to collapse
Do you have more information? because I would like to flash android 12 release candidate instead of fighting with this phone any further. Thank you.
i delete all partition, i was reboot, but imei 0, can i fix this
hello i have a sprint v50 variant but i don't have recovery or fastboot mode i have unlocked bootloader

Question Nord 2T 5G Full Factory ROM/Firmware with Scatter file for Unbricking

After successfully rooting my Nord 2T by backing up and then patching the stock boot.img I proceeded to patch the inactive slot within Magisk (it was unecessary of me..) and after rebooting entered a loop. Anyone know where I can get the factory ROM? I was on the May patch. Thanks in advance!
I am also looking for the factory OTA image.
How did you get the boot.img exactly?
jolaviska said:
I am also looking for the factory OTA image.
How did you get the boot.img exactly?
Click to expand...
Click to collapse
Good ol SP Flash but I think the backed up images are corrupted hence the need of factory firmware to use it to restore my device.
Apologies I did not realise you still needed the firmware. I have mirrored it here if you still need it May Patch Full ROM
garylawwd said:
Apologies I did not realise you still needed the firmware. I have mirrored it here if you still need it May Patch Full ROM
Click to expand...
Click to collapse
So extracting boot. img from your file won't be enough to do Root right?
Riski3Run said:
So extracting boot. img from your file won't be enough to do Root right?
Click to expand...
Click to collapse
You can't extract from the firmware. You must use spflash tool to pull the boot.img from the device (mediatek devices are a bit different to Snapdragon devices)
I'm going to do it today but I had to bring my daughter to the hospital after a fall she had which required stitches.
Once I have it extracted I might write a guide on how to do it with links to all firmware needed and have a thread where we will have both the stock and magisk patched boot.img's available.
Been like 6 weeks and no root on my device, this is the longest I have went without rooting in almost 7 years
garylawwd said:
You can't extract from the firmware. You must use spflash tool to pull the boot.img from the device (mediatek devices are a bit different to Snapdragon devices)
I'm going to do it today but I had to bring my daughter to the hospital after a fall she had which required stitches.
Once I have it extracted I might write a guide on how to do it with links to all firmware needed and have a thread where we will have both the stock and magisk patched boot.img's available.
Been like 6 weeks and no root on my device, this is the longest I have went without rooting in almost 7 years
Click to expand...
Click to collapse
Thanks. I rooted mine within a day but went too far with patching the inactive slot via Magisk and now phone is soft bricked. If you are still interested in extracting the boot image for patching then use this tool. I tried to use it to flash the payload.bin but phone still not booting. I even flashed all the extracted images manually in fastbootd. I guess the OTA file doesn't contain all the files needed to restore the device back to its factory state.
Anyone with the full firmware containing the SP Flash Scatter file please share it. You'll be saving everyone else. I bought my phone on a trip and there are no OnePlus repair centers over here so won't be using my phone until I can restore it myself
garylawwd said:
Apologies I did not realise you still needed the firmware. I have mirrored it here if you still need it May Patch Full ROM
Click to expand...
Click to collapse
Hello
Can't you upload this zip file somewhere else?
Each time download is not finished.
Riski3Run said:
Hello
Can't you upload this zip file somewhere else?
Each time download is not finished.
Click to expand...
Click to collapse
Saw you were able to fully extract the payload.bin so could you mirror the files as well..
Issue is now resolved Thanks @Riski3Run and @garylawwd
Alternatively extracting and flashing the payload.bin ALSO works. No need to extract the images just use this beautiful tool
garylawwd said:
Apologies I did not realise you still needed the firmware. I have mirrored it here if you still need it May Patch Full ROM
Click to expand...
Click to collapse
Hi Garylawwd, when I click on the link it displays an empty folder. Can you perhaps reupload the firmware? My device is bricked and I'm unable to find the stock rom and scatter file for CPH2399 :/
woodiewood3 said:
Hi Garylawwd, when I click on the link it displays an empty folder. Can you perhaps reupload the firmware? My device is bricked and I'm unable to find the stock rom and scatter file for CPH2399 :/
Click to expand...
Click to collapse
Were you on the latest June security patch?
garylawwd said:
Were you on the latest June security patch?
Click to expand...
Click to collapse
Yes I was on the June patch, but I completely messed up my Phone.. can't boot into recovery or fastboot, screen stays black.
When I plug in the phone my computer recognizes it as Mediatek usb port.
When I try to use mtk_gui it is able to connect but it freezes after DA extension and thus I'm unable to read or write anything from or to the device via mtk_gui.
I hope that I can flash the stock firmware via SP flash tool, otherwise I will probably need to send it to OP repairs centre.
But to flash via SP flash tool I do need the firmware + scatter file. ATM I'm unable to find them.
I am unable to create the scatter file via MTKDroid it says --- Unknown ROM structure, backup NOT possible!

Categories

Resources