Database Info

I need stock recovery.img for (Asus Memopad Fhd 10) me302kl

I forgot to unlock my device before flashing TWRP recovery. Now it stuck in fastboot mode and it says "Invalid boot image !!!".
OS is not starting.
Recovery mode is not opening.
I have only fastboot mode and fastboot connected to Windows PC.
I tried to flash original boot.img from original ROM files but didnt work. Original .zip files don't include recovery.img. It is just a normal folder. At lease i have to unlock this device from fastboot to continue flashing custom ROM.
Can anyone help me?

I need the recovery.img ,too. Someone can help us ,please.

Hi all, I had the same case. You can refer to the following page:
https://w3bsit3-dns.com/forum/index.php?showtopic=545744&st=2260
Then, do
1) Restore via Fastboot mode with service firmware
2) Firmware update with microsd card
I can at least return back to the stock firmware.

dannychow said:
Hi all, I had the same case. You can refer to the following page:
https://w3bsit3-dns.com/forum/index.php?showtopic=545744&st=2260
Then, do
1) Restore via Fastboot mode with service firmware
2) Firmware update with microsd card
I can at least return back to the stock firmware.
Click to expand...
Click to collapse
It's useful. I can return back,too. Thank you very much.

Have same problem, solution link is broken
Hello YKcho and Dannychow,
I have the same problem and the link you posted is broken. could you please guide me through the solution?
currently I have fastboot installed and operational (adb does not find a device)
Device status:
(bootloader) Device unlocked: false
(bootloader) Device tampered: true
(bootloader) Device granted: false
(bootloader) SB=Y
thanks in advance.

Good evening I have read all the messages of the forum, and I have tried the various solutions to solve the problem.
It tells me "Invalid boot image!" and does nothing else even when restarting. Connecting it to the PC I can see the code of the tablet with ADB and command fastbot devices.
The tablet is recognized in peripheral management as Asus Android Device / Asus Bootloader Interface
I downloaded this firmware ... ME302KL-OPEN_epad-eng-900M-hdpi-H00_0.16.F_0521-10.10.0.52.4.8-20130731-1422-Rawdata.rar but it doesn't work.
I ran the flashall.cmd file as administrator (Right click on the file and choose: run it as administrator)., The command "debrick-flashall.cmd", and also the commands flashall-ME302KL-1GMEM.cmd or if you also have the brick debrick-flashall-ME302KL-1GMEM.cmd without the tablet exiting FASTBOOT mode. Is it possible that it doesn't work because my operating system is WIN 10 ?? ... is there any firmware that works with windows 10 or some other indication to solve the problem.
Thank you
Buonasera ho letto tutti i messaggi del forum , ed ho provato le varie soluzioni per risolvere il problema.
Mi dice "Invalid boot image!" e non fa altro anche riavviando. Collegandolo al pc riesco a vedere il codice del tablet con ADB e comando fastbot devices.
Il tablet e' riconosciuto in gestione periferiche come Asus Android Device/ Asus Bootloader Interface
HO scaricato questo firmware ...ME302KL-OPEN_epad-eng-900M-hdpi-H00_0.16.F_0521-10.10.0.52.4.8-20130731-1422-Rawdata.rar ma non funziona.
Ho eseguito il file flashall.cmd come amminisreatore ( Tasto destro sul file e scegli: eseguilo come amministratore)., l comando "debrick-flashall.cmd", ed anche i comandi flashall-ME302KL-1GMEM.cmd oppure se hai anche il brick debrick-flashall-ME302KL-1GMEM.cmd senza che il tablet uscisse dalla modalità FASTBOOT. E' possibile che non funzioni perchè il mio sistema operativo è WIN 10??...c'e qualche firmware che funzioni con windows 10 o qualche altra indicazione per risolvere il problema.
grazie

Lg Q Stylus alpha can't enter to "fastboot" mode.

Hi, some days ago i tried to root my Lg but when i try to get fastboot mode to install TWRP it just reboot normally. I did use adb fastboot to enter "fastboot mode". My android version is 8.1.0.

Busco solución por favor
Tengo el mismo problema con el LG Qstylus Plus, de ninguna manera logro que entre al modo fastboot. Y tampoco he encontrado una respuesta ni una solución.

Did someone find and answer to this?

[FIXED] Qualcomm Crash Dump mode.

I finally found the solution to the Qualcomm Crash Dump Mode error. Generally a lot of people would recommend flashing the OOS again through fastboot but not all OOS can fix the crash dump mode error. However the 9.X.X variants of OOS are effective in fixing this error. Just download this ROM, extract it, connect your phone to PC in fastboot mode and press flash all in the extracted ROM folder. Voila, your phone's alive again.

Viranch said:
I finally found the solution to the Qualcomm Crash Dump Mode error. Generally a lot of people would recommend flashing the OOS again through fastboot but not all OOS can fix the crash dump mode error. However the 9.X.X variants of OOS are effective in fixing this error. Just download this ROM, extract it, connect your phone to PC in fastboot mode and press flash all in the extracted ROM folder. Voila, your phone's alive again.
Click to expand...
Click to collapse
Hello buddy, I just want to ask because this is 9.5.8. file and I'm currently at OB15, is it safe to flash?

edong23 said:
Hello buddy, I just want to ask because this is 9.5.8. file and I'm currently at OB15, is it safe to flash?
Click to expand...
Click to collapse
yes.

Hi guys. I got the crash dump error after trying to flash the new OTA. I found this post, flashed the linked fastboot rom, but then it just gets stuck on boot. Since then I've tried to flash a few different fastboot roms but I just end up with the crash dump or stuck on boot. Any suggestions would be much appreciated

Viranch said:
Finalmente encontrei a solução para o erro do Qualcomm Crash Dump Mode. Geralmente, muitas pessoas recomendariam atualizar o OOS novamente através do fastboot, mas nem todos os OOS podem corrigir o erro do modo de despejo de memória. No entanto, as variantes 9.XX do OOS são eficazes para corrigir esse erro. Basta baixar essa ROM, extraí-la, conectar seu telefone ao PC no modo fastboot e pressionar flash all na pasta da ROM extraída. Voila, seu telefone está vivo novamente.
Click to expand...
Click to collapse
Essa ROM serve para o Meizu Note 9?

if bootloader is unlocked just downloaded 3.5.2 recovery img boot into twrp go to advance>flash current recovery and reboot

Viranch said:
I finally found the solution to the Qualcomm Crash Dump Mode error. Generally a lot of people would recommend flashing the OOS again through fastboot but not all OOS can fix the crash dump mode error. However the 9.X.X variants of OOS are effective in fixing this error. Just download this ROM, extract it, connect your phone to PC in fastboot mode and press flash all in the extracted ROM folder. Voila, your phone's alive again.
Click to expand...
Click to collapse
Wow...!! Literally a lifesaver. Got my OP7 up and running with this ROM. Thanks a ton..!!

how you fix this qualcomm crash dump mod plz explain me. my 4n same issue
whan i put EDL mod my 4n is auto reboot

helpme

Como puedo salir del modo edl sin no flashee nada
How can I get out of edl mode without flashing anything?

you can't

Long hold the power button

Question how to exit recovery, bricked tablet

Since December I bought the tablet and in the process of unlocking the boot the tablet bricked, since then it's stuck in fastboot mode, I've tried several things and nothing has worked until today, if anyone can help me I'm grateful.
I couldn't install twrp
TB-J716F

Ну давай тут каждый будет на своём языке писать. Язык форума - английский.
Это не рекавери вообще, это fastboot.
Модель планшета укажи, балбес. TB-???

f1tm0t said:
Ну давай тут каждый будет на своём языке писать. Язык форума - английский.
Это не рекавери вообще, это fastboot.
Модель планшета укажи, балбес. TB-???
Click to expand...
Click to collapse
I used the translator, sorry if I'm not as smart as you, smartass

Are you tried turn off tablet and put it in EDL mode? It works?
If EDL working, you can flash some firmware via RSA or QFIL.

f1tm0t said:
Are you tried turn off tablet and put it in EDL mode? It works?
If EDL working, you can flash some firmware via RSA or QFIL.
Click to expand...
Click to collapse
Now the tablet simply doesn't turn on anymore, when I connect it to the computer it gives this image error, I try to put it in EDL but it always gives the error
I have already updated all possible USB drives

You need install QPST: https://qpsttool.com/qpst-tool-v2-7-496
It installs needed drivers.
You must to see QDLoader 9008 port

f1tm0t said:
You need install QPST: https://qpsttool.com/qpst-tool-v2-7-496
It installs needed drivers.
You must to see QDLoader 9008 port
Click to expand...
Click to collapse
after a long time I managed to put it in EDL, I can install the rom without problems, but I always fall into this image error.
The entire installation process in qfil runs smoothly.
I couldn't install TWRP, can you help me?

You have some problem with /data partition, stock recovery can't fix it.
Go to my post: https://forum.xda-developers.com/t/tb-j716f-twrp-for-android-12-zui-14.4523577/
Download latest twrp.
Turn tablet into fastboot mode.
On PC run command:
Code:
fastboot flash recovery TWRP_J716F_A12_DD. img
then
Code:
fastboot reboot recovery
You need format data from TWRP.
Wipe - Format data - type "yes".
PS. If your had flashed A11 firmware - you need TWRP for A11 - take it in this topic^ https://forum.xda-developers.com/t/tb-j716f-latest-twrps-for-a11-and-a12.4533223/

f1tm0t said:
You have some problem with /data partition, stock recovery can't fix it.
Go to my post: https://forum.xda-developers.com/t/tb-j716f-twrp-for-android-12-zui-14.4523577/
Download latest twrp.
Turn tablet into fastboot mode.
On PC run command:
Code:
fastboot flash recovery TWRP_J716F_A12_DD. img
then
Code:
fastboot reboot recovery
You need format data from TWRP.
Wipe - Format data - type "yes".
PS. If your had flashed A11 firmware - you need TWRP for A11 - take it in this topic^ https://forum.xda-developers.com/t/tb-j716f-latest-twrps-for-a11-and-a12.4533223/
Click to expand...
Click to collapse
I installed twrp as you instructed, but in the last code the tablet does not restart, it gives this message "C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot reboot recovery
fastboot: usage: recovery from unknown reboot destination"
Another thing I noticed that the tablet serial has changed, it is no longer with the serial that came with the tablet

Show me screenshot with "fastboot reboot" command execution.
Tablet's s/n - is not my deal, nothing about s/n changing in my instructions.
SN can be changed only with replacing fpinfo partition inside the tablet or restoring of twrp backup, taken from other tablet.
You can reboot from fastboot mode to recovery(TWRP) mode by tablet's buttons.
Volume buttons are choice, Power button is confirming.

f1tm0t said:
Mostre-me a captura de tela com a execução do comando "fastboot reboot".
S/n do tablet - não é meu negócio, nada sobre s/n mudando nas minhas instruções.
O SN pode ser alterado apenas substituindo a fpinfo considerável dentro do tablet ou restaurando o backup twrp, obtendo de outro tablet.
Você pode reiniciar do modo de inicialização rápida para o modo de recuperação (TWRP) pelos botões do tablet.
Os botões de volume são escolhidos, o botão liga / desliga está confirmando.
Click to expand...
Click to collapse
Meu amigo, vou descrever o que fiz com o tablet desde que ele chegou.
1. quando o tablet chegou vi que estava em L3 e sem pesquisar nada tentei bloquear o boot, e fiz isso mas não sabia que iria brickar o aparelho.
2. depois de pesquisar vi que tinha um método HAHAHAHA e tentei muito resolver, depois de muito tempo tentando consegui, mas quando usei o qfil a imagem rodou mas foi para onde diz que está corrompida
3. Até então não tinha conseguido instalar o TWRP e com sua orientação consegui instalar o twrp, baixei o roons via OTA e renomeei para update.zip
4. Tentei o wipe conforme instruído, mas deu alguns erros como podem ver na imagem, mas a instalação foi um sucesso até o reset do tablet ficou em loop infinito, tentei as duas versões OTA e todas estavam em um Loop infinito
5. Agora quando tento instalar novamente o twrp não consigo mais, o comando para reiniciar o aparelho não funciona, como podem ver na imagem.
6. Usando outro tutorial aqui do fórum consegui retornar o serial válido, porém sem sucesso no qfil
4.
5.

Thanks for everyone's help, especially my friend f1tm0t, with your tips I managed to revive my tablet, I put the zui14 CN, I live in Brazil, but for those who didn't have anything, it's great.
You can close the topic.