Hello everyone! So after the new mediatek DAA and SLA protection bypasses you can find github repo of here , using the bypass we are able to use SPFlash Tool, here is a guide how you can do it! This guide is for Realme Mediatek devices only . DON'T DO ANY OF THESE IF YOU HAVE SOMETHING ELSE!
ALWAYS USE DOWNLOAD ONLY MODE OF SP FLASH TOOL.
DON'T TOUCH ANYTHING RELATED TO FORMAT ON SP FLASH TOOL! (IT'S WRITTEN EVERYWHERE, YOU WILL LOSE YOUR IMEIS IF YOU USE FORMAT ALL + DOWNLOAD. YOU ARE SAFE IF YOU USE DOWNLOAD ONLY.)
Windows Method
Requirements:
Device Firmware (Download as per your device model)
Bypass Tools Pack
SP Flash Tool
Install Python from Windows Store
libusb-win32 - Having Issues? Use this.
Get usbdk installer (.msi) from here and install it
MAKING YOUR FIRMWARE READY:
1) Clone this repository : oppo_decrypt
Code:
git clone https://github.com/bkerler/oppo_decrypt
or download the repo zip and extract it
2) Extract the downloaded firmware and move the ofp file to the oppo_decrypt folder
3) In the oppo_decrypt folder open cmd and type these:
Code:
pip3 install -r requirements.txt
(Make sure you have python and pip installed)
4) All the requirements are installed, now it's time to decrypt the ofp:
Code:
python3 ofp_mtk_decrypt.py name_of_file.ofp out
(Replace the ofp name with your actual ofp name)
5) After the decryption now its time to merge superimages (THIS IS ONLY FOR DEVICES WITH DYNAMIC PARTITIONS, IGNORE THIS STEP FOR NON-DYNAMIC DEVICES)
- Install ubuntu from wsl : Guide for that
- Run ubuntu and install simg2img
Code:
sudo apt install simg2img
- Go to the path of your extracted ofp
e.g.
Code:
cd /mnt/d/oppo_decrypt/out
(go to the path of your out folder)
- Check the supermap.csv file
Code:
nano supermap.csv
- check your region and note the superimages names
- Now to merge them :
Code:
simg2img super.0.xxxx.img super.1.xxxx.img super.2.xxxx.img super.img
(Replace the xxxx with the super images' names from your region.)
- After this you will get a Super.img in that out folder
- Now go to scatter file in out folder and edit it (Search Super.img in that and change is_download=false to true)
FLASHING THE FIRMWARE:
1) Extract the bypass zip
2) Go to driver folder, find the .inf file right click and press install.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3)Download this file and install it, after installing power off phone and connect to pc while holding Vol+- (don't leave the buttons after connecting) . You might need this driver as well if it's not detected.
Press next, connect your device to PC while holding Vol+- buttons (your device needs to be powered off, and don't leave the buttons) and you will see the mtkdriver down below. Install it.
Choose MediaTek USB Port and install it.
4)Then run the brom.bat under Bypass folder.
5) Now power off the phone and connect the phone while holding volume + and - (Don't leave the buttons until the bypass is done)
6)After the above step Go into Flash Tool folder and open the SPFlash tool go to Options>Option
Click on Connections and select UART and set Baud Rate to 921600
7) after that choose scatter file and also if not set, set your download-agent. You don't need to select auth file as authorization is disabled. Once you do it, it should look like this. ALWAYS MAKE SURE DOWNLOAD ONLY MODE IS SELECTED! DON'T SELECT OTHER MODES!
Make SURE "Download Only" is selected. Don't select ANYTHING ELSE! You will lose your IMEIs, Serial Numbers, Capability of Hardware Attestation etc. if you choose "Format data + Download" make SURE you selected "Download Only".
8) Uncheck oplusreserve2 first. Now, you can start downloading with the button and after that a checkmark will appear. You can reboot your phone and use it like before now! All your userdata will (inevitably) be cleared!
After flashing it should look like this. Download has been complete. Enjoy!
Notes :
After this phone might not boot due to encryption, you can do any of the below procedures to format your data and boot your phone
1. In case you can access recovery by holding volume and power button - Wipe all data from recovery and reboot
2. In case you cannot access recovery, power off phone then enter this command in mtkclient :
Code:
python mtk e metadata,userdata,md_udc
and connect phone while holding both volume buttons. After this just reboot phone
Also note that first boot takes some time, so don't panic leave it for few minutes it'll boot
Credits :
https://github.com/bkerler/ for decryptor and for creating the tool.
Good morning, @pritish1998. Thanks for the effort in producing this well-illustrated and in-depth writeup. Please note, however, that I am removing the reference to Telegram that was previously in your post.
Regarding social networking links, please observe that, as an exemption from the last bullet of rule no. 5 of the XDA Forum Rules, we only grant developers the privilege to share references to their social networks in their own development threads, and if thorough support is also provided in that thread. These conditions don't apply to this thread. Additional information is also available here:
Telegram Chat Channels - Way Forward
Thanks for your cooperation.
Related
A. TUTORIAL ROOT
TOOLS AND MATERIALS :
Driverhttp://ge.tt/8sELSyg/v/3
Binary Root Toolhttp://www.4shared.com/archive/4-yfGgH3/Root_with_Restore_by_Bin4ry_v1.htm
STEP WORK:
Make sure your phone is in USB Debugging is checked state (settings / development / here)
Source Unknown tick (setting security / Unknown Source)
Make sure the driver is installed correctly in leptop / PC
Extract results donwload Binary file Root Tool then click RunMe.bat
A command prompt will open and you select number 1. Normal, wait until you appear in hp T1E notification, then select restore my data is, then a few moments later your phone will reboot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After reboot check if superuser app is already available? If he immediately tests with applications that require root privileges. If the application runs, you've survived phone Root well.
B. TUTORIAL INSTALL CWM
TOOLS AND MATERIALS :
Mod Recovery
Driverhttp://ge.tt/8sELSyg/v/3
SP Flahs Toolttp://ge.tt/5Edn9gh?c
STEP WORK:
Download all the above ingredients, make sure leptop / pc has its drivers installed correctly
Then extract Mod Recovery.zip, (boot.img, recovery.img and open the file created Scatter)
Open SP Flash Tool.exe
Then enter the file Scatter file created on the left kollom scatter loading.
Then check BOOTIMG, then click and enter the boot.img file that you have downloaded earlier.
Then check back RECOVERY section and click then enter the recovery file that you have downloaded earlier.
And connect it to the leptop / pc hp are turned off, waiting indication in SP Flash TOOL detect your phone
Then press the Download / F9 in SP Flash Tool, wait until the process is complete.
If all processes are finished, enter cwm do the test in the off state by press the power button + volume up. If successful it will look like this
All credits to Rua1, super-mega brain and MTKdroidTools creator.
=============================================================================================
How Nandroid Backup via CWM?
Enter cwm (phone off using the power button + volume combining up)
Use the navigation on the bottom with volume up + down keys, the enter key to power
Select backup & restore
Then select the backup to internal sdcard, wait until all processes are running without any error
And select reboot system now
if all goes well the process, then there will be a new folder on your sdcard named "ClockworkMod" then in that folder there is a data folder backup your rom. example the folder name 2013-08-06.03.17.56
Great job and wonderful mastah. Very helpful :good:
bacrot78 said:
Great job and wonderful mastah. Very helpful :good:
Click to expand...
Click to collapse
Tqs.... Masta tonk pank :v
This is a messy post, do as you please with it. I am not responisble for ang damage to your device. Additionally, I dont take any credits for any of this, I just put everything together here.
Tags zc551kl Asus Zenfone 3 Laser z01bdc
Tools Needed:
Asus Bootloacker Unlock Tool - http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZC551KL/UnlockTool_Android_M_0706_signed1.apk
You current boot.img version which can be downloaded from here [Its packaged in the update file]- https://www.asus.com/us/Phone/ZenFone-3-Laser-ZC551KL/HelpDesk_BIOS/
ADB and Fastboot from here [Credits to Snoop05] - https://www.dropbox.com/s/mcxw0yy3jvydupd/adb-setup-1.4.3.exe?dl=0
Magisk Manager - https://tiny.cc/latestmanager
Prep:
Install the Asus Unlocker on your phone and unlock it.
Install Magisk Manager on your phone but dont run it yet.
Enable USB Degugging on your phone.
Install ABD and Fastboot on your PC. It will be installed to c:/adb/
Download the update that matches your phone version to your pc. [Mine was version "WW-32.40.106.41"]
Open the update file on your pc with your favorite zip manager and extract the boot.img .
Put the boot.img onto your phones internal storage.
Follow this guide [Credits to Dhananjay @ thecustomandroid.com]
» Non-rooted devices
Magisk 14.0 introduces a new and neat method to install on non-rooted Android devices. This new process doesn’t require your device to be rooted, nor does it require a custom recovery like TWRP. But for this method to work, your device must have the stock boot.
But for this method to work, your device must have the stock boot.img dump placed in the internal storage.
Make sure that you enable USB debugging and setup ADB access first, you will need it later in the guide.
Download Magisk Manager 5.3.0: Link
When the APK has been downloaded, use a file manager to install it. Now run the app from the app drawer.
Go to the app settings and tap on “Patched Boot Output Format”. You can select “.img.tar” if you will be using ODIN to flash the file or else simply select “.img” for the rest of the devices.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Go back to the app main screen and tap on the “Install” button. Go to INSTALL > PATCH BOOT IMAGE FILE.
Navigate through the storage and select the stock boot.img file. As soon as you select the stock boot.img file, the app will download the installer to patch the image.
Once the process is complete, you can tap on the “CLOSE” button.
Your new and patched boot image now include root and support for modules. So the last step is to grab this boot file and flash it your device via fastboot or ODIN (Depending on the output format you chose in step #4).
Connect your device to the PC via USB cable and navigate to the Magisk Manager folder inside the storage. Your “patched_boot.img” file will be present right there. So copy it to your PC.
Move the “patched_boot.img” file to C:/adb folder. And type in the following command to boot your phone into bootloader/fastboot mode:
adb reboot bootloader
Once your phone enters the bootloader/fastboot mode, enter the command to flash the file:
fastboot flash boot patched_boot.img
Finally, reboot your device:
fastboot reboot
That’s all, you have just installed one of the most trending mod out there and especially on your non-rooted device without any need of a custom recovery. Isn’t it great? Tinker around with the app and see what all things you could do.
I can confirm this is working! Thank you!
Reporting working on Android O (8.0), I download update from Asus and patch boot image. Thanks
kamo84 said:
Reporting working on Android O (8.0), I download update from Asus and patch boot image. Thanks
Click to expand...
Click to collapse
I know it's been some time since this was discussed, but I am trying to go through this process. Can you confirm that you unlocked the bootloader on 8.0 with the Asus tool? Or did you install magisk without unlocking the bootloader (if that's possible)?
thanks
I don't think the unlocker tool works anymore.
[SIZE=+2]This thread has been created
for
Questions & Answers/Troubleshooting[/SIZE][SIZE=+2]Specific to[/SIZE]
Ulefone Note 9P
There are a number of "easy" tutorials on how to root the rather new Ulefone Note 9P, but none of them works as inteded, as of today.
After I've found (by my own research) how to unlock the phone, I'm sharing the easy procedure here in hope someone can go a step further and actually root it.
Ulefone Note 9P unlock procedure
- become a developer by tapping 7 times the build number in Phone settings;
- from the Developer Menu, enable OEM unlock and USB Debug
- Install Android platform_tools on your PC (I'm personally on Linux/Ubuntu, so for me it's just a matter of unpacking the archive and fixing some missing libraries)
- Connect the phone to the PC via an USB DATA cable
- Give consensus for USB debug, and allow the PC to access
- "./adb devices" should list the connected phone as "device" (it it's "unauthorized", go to Developer Menu and delete past authorizations for USB Debug)
- "./adb reboot fastboot"
- "./fastboot devices" (check the phone is still there)
- "./fastboot flashing unlock_critical" (OEM unlock and USER DATA WIPEOUT!)
Now my Ulefone Note 9P is actually unlocked (check: from the Developer Menu, you can't re-enable OEM Lock, since it is grayed and reports the bootloader is unlocked already).
Ulefone Note 9P root procedure (help is needed here!)
- Download MagiskManager-v7.5.1.apk
- "./adb install MagiskManager-v7.5.1.apk"
- MagiskManager icon is now on the phone screen
- Download Ulefone Note 9P stock Android 10 image (GQ3092SH1_HC_M629_Ulefone_EEA_20200701_V12.tar.gz)
- Unpack the archive and extract "boot.img"
- Copy the boot.img to the phone via standard file transfer, putting e.g. in the "Download" folder on the phone
- Open MagiskManager on the phone, it says Magisk is not installed
- Click Install, then Install (again), then "Select and update a file"
- Browse and search the boot.img you just downloaded to the phone
- Magisk starts to patch it, then saves the result as "magisk_patched.img" in the same folder
- Transfer the "magisk_patched.img" from the phone back to the PC via standard file transfer
- Download "Smart Phone Flash Tool" (SP_Flash_Tool-5.1916_Linux.zip)
- Open it: a "scatter file" is required for any operation, and it can be found in the same directory where you unpacked the stock ROM (filename: "MT6765_Android_scatter.txt")
- In the Download tab, unselect all partitions, then only select the "boot" partition;
- click on the left, where the filename is, and browse where "magisk_patched.img" is, the select it)
- Now click "Download" in the SP Flash Tool: it waits for the kernel to find the "Product: MT65xx Preloader // Manufacturer: MediaTek"
- reboot the phone while still leaving it connected to the PC
- during reboot, the SP Flash Tool activates and writes the boot partition to the phone.
- Then, currently, the Ulefone Note 9P enters a reboot loop, as soon as you detach it from the PC (it won't even boot until then).
Ulefone Note 9P unbrick procedure
- So the Ulefone Note 9P is in a bootloop now!
- Luckily, even that short boot time is enough to access the "MT65xx Preloader" device in the phone.
- So start the SP Falsh Tool, load scatterfile as before, unselect all partitions then select only boot;
- In the "boot" row, all left, there's the filename: browse and select the original "boot.img" from the stock ROM
- Click Download, and wait for the Preloader to apper...
- Ulefone Note 9P is now able to boot normally, it's still unlocked, but also unrooted...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please keep discussion focused, on questions pertaining to this Device
[email protected] said:
[SIZE=+2]This thread has been created
for
Questions & Answers/Troubleshooting[/SIZE][SIZE=+2]Specific to[/SIZE]
Ulefone Note 9P
.......
Please keep discussion focused, on questions pertaining to this Device
Click to expand...
Click to collapse
With newer devices you also need to disable verification, in order to boot other unsigned images. Not just bootloader unlock.
This device has three verification partitions that need disabled.
vbmeta
vbmeta_system
vbmeta_vendor
All are found in same stock firmware archive you have mentioned in guide.
flash them in fastboot like this
Code:
fastboot --disable-verity --disable-verification flash vbmeta /some-directorty-on-your-pc/vbmeta.img
fastboot --disable-verity --disable-verification flash vbmeta_system /some-directorty-on-your-pc/vbmeta_system.img
fastboot --disable-verity --disable-verification flash vbmeta_vendor /some-directorty-on-your-pc/vbmeta_vendor.img
now you can either flash the magisk-modified-boot.img to boot in fastboot or back to spflash tool.
it will not bootloop. but sorry, root was still not working.
Can confirm flashing GSI roms works also. even the new android 11 GSI.
if interested I have been using tags on my posts, when for devices that do not have there own forum section.
https://forum.xda-developers.com/tags.php?tag=ulefone+note+9p
#####################################
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
#####################################
WELCOME TO THE FORUM HERE WE ARE GOING TO LEARN TO EITHER FLASH/ROOT/UNBRICK OR EVEN INSTALL TWRP TO THE POP4 PLUS MSM8909 ANDROID VERSION 6.0.1 (5056E) I HAVE NOT TESTED ON OTHER DEVICES BUT THERE IS A MASSIVE FIREHOSE PROTOCOL LIST WITHIN THE FILES OF QPT FOR QUALCOMM DEVICES, YOU CAN TEST YOURSELF IF YOU HAVE A DIFFERENT DEVICE, IF YOU ARE TESTING ANOTHER DEVICE TAKE THE BACKUP, IF YOUR DEVICE DOES NOT CONNECT WITH FIREHOSE PROTOCOL THE APP WILL GENERATE THE FIREHOSE PROTOCOL FOR YOUR DEVICE JUST COPY THEM INTO THE QPT FIREHOSE FOLDER
!!!! I AM NOT RESPONSIBLE IF YOU BRICK YOUR DEVICE !!!!
ZIP CONTENTS
*POP4+
~XQCN BKP
~STOCK FIRMWARE
~QALCOMM PREMIUM TOOL V2.4 CRACKED
~PORTED TWRP
~POP4+DRIVERS
~IF YOUR BRICKED(NO BOOT) USE THIS
~READ ME FIRST.TXT
~DONATIONS
DOWNLOAD LINK : ****EDITING FILES, NOTICED COUPLES BUGS IN FLASH RAWPROGRAM0 DOWNLOAD LINK AVAILABLE SOON
******EXTRACT ALL FILES*******
******ENABLE PHONE ADB AND OEM BOOTLOADER UNLOCK THROUGH DEV SETTINGS****
***GRAB THE BOOT.IMG FROM THE FIRMWARE FOLDER AND PATCH WITH MAGISK***
**I HAVE ATTACHED A PATCHED MAGISK IMAGE HERE BELOW**
LETS BEGIN FLASHING!!!
FIRSTLY LETS GET ALL THE DRIVERS DOWN AND INSTALLED IF YOU DONT ALREADY !!
~DOWNLOAD LATEST QUALCOMM DRIVERS Qualcomm drivers ( MAKE SURE YOU HAVE QUALCOMM COM PORT INSTALLED IN DEVICE MANAGER)
~DOWNLOAD ADB/FASTBOOT OR ANDROID SDK PLATFORM TOOLS ADB Drivers
~GO TO ZIP AND INSTALL ALL DRIVERS POP 4+ DRIVERS/PYTHON-2.7/ PC GO TO DEVICE MANAGER AND MANUALLY INSTALL ALL DRIVERS FOR YOUR SYSTEM THAN RUN THE "AUTORUN.INF" IN MAIN FOLDER IN THE POP4 DRIVER FOLDER
~INSTALL QUALCOMM PREMIUM TOOL
~ IF ACTIVATION FOR QPT IS NOT ACTIVATED USE THE KEYGEN TO GENERATE NEW ACTIVATION.. MAY NEED TO DISABLE ANTIVIRUS/FIREWALL
~START QPT
~IF YOUR DEVICE VERSION IS NOT POP4 5056E MAKE A BACKUP THIS IS REQUIRED !!
~PUT DEVICE INTO EDL/DOWNLOAD MODE - YOU CAN USE ADB OR BY HOLDING [PWR VOL+ AND VOL-]
Code:
adb devices $(make sure device is connected)
adb reboot edl
~ CHECK DEVICE MANAGER FOR DEVICE CONNECTION ON COM PORT
****FOR THOSE NOT ON 5056E USE STEP BELOW OTHERWISE SKIP THIS STEP****
~GO TO QPT/ UNDER "BLOCK0 READ" CLICK FOLDER FOR SAVE DESTINATION/ ALSO CREATE A FOLDER FOR SAVE FOR BACKUP AND CLICK " READ ( 9008 ) GO TO FIRMWARE SECTION AND MAKE A BACKUP BE PATIENT !! BACKUP WILL TAKE A WHILE MAYBE SOME HOURS DEPENDING ON YOUR PC H/W!! HAVE A MIN OF 40 GB OF SPACE AVAILABLE
~ONCE FINISHED WITH BACKUP CLICK ON EMMC TAB BROWSE TO WHERE BACKUP IS AND SELECT THE SYSTEM.BIN IT WILL NOW LOAD THE FIRMWARE
~IN THE BLANK BOX INPUT YOUR SAVE DESTINATION FOR FIRMWARE
~CLICK ON THE EXTRACT PARTITIONS/FIRMWARE ON SCREEN AND GET YOUR FIRMWARE
NOW YOU HAVE YOUR DEVICES STOCK FIRMWARE !!
****CONTINUE****
~CLICK PARTITION TAB/ CLICK SCAN/ CLICK DO JOB AND PARTITIONS WILL NOW LOAD
IF YOU GET AN ERROR SCANNING REBOOT EDL/DOWNLOAD MODE AND RETRY
~CLICK ON "WRITE" CLICK ON BOOT PARTITION AND A SEARCH WILL POP UP, FIND YOUR SAVED PATCHED MAGISK AND FLASH
~ONCE FINISHED UNCHECK THE BOX CLICK RECOVERY AND FIND THE TWRP FILE IN TWRP FOLDER IN ZIP
~FLASH THE RECOVERY
CONGRATS!!!!! YOUR NOW ROOTED WITH MAGISK AND TWRP RECOVERY INSTALLED!!!!!! YOU CAN NOW REBOOT BY LONG PRESSING PWR
**** TO UNBRICK DEVICE IN THE EMMC TAB SELECT ALL PARTITIONS AND FLASH SELECTED PARTITIONS TO DEVICE ****
IF YOU WOULD LIKE TO DONATE USE DONATIONS.JPG/ PAYAPAL LINKED
****** I AM CURRENTLY WORKING ON A CUSTOM ROM FOR THE POP4 PLUS 5056E WILL SOON POST AND UPDATE WITH ROM ******
do yhou have the zip fixed yet? hahaha
-----------------------------------------------------------------------
Finally I could fix my redmi 6A after suffering hardbrick. I couldnot enter to recovery neither to fastboot mode. My redmi 6A just give me a black screen with vibration on each approximataley 15-20 seconds.
----------------
Must have tools:
----------------
1.libusb-win & mtk-bypass:
12.52 MB file on MEGA
mega.nz
2.spflash tool (v5 or the latest on no problem)
SP Flash Tool v5.1924 - Download SmartPhone Flash Tool
SP flash tool download - SP Flash Tool v5.1924 is the latest version that can flash Stock ROM, Custom recovery for your MTK based android phone. SPFLASH tool comes as free-ware.
spflashtool.com
3.mediatek driver:
MediaTek_USB_Drivers.exe | by Droidwin for Misc. Software & Hardware Resources
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
4.Install MediaTek USB VCOM Drivers (If required)
5.stock firmware redmi 6A:
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
or
Download Redmi 6A (cactus) V11.0.9.0.PCBMIXM MIUI 11 Stable Full Rom | XiaomiROM.com
The Stable update V11.0.9.0.PCBMIXM has been officially released for Redmi 6A (codename is cactus). Before updating, please make sure you have …
xiaomirom.com
download and extract, from tgz file u will produce another comppressed file, just extract it once again.
6.auth file
Sp flashtool authentication file!
HIT THE THANKS BUTTON Newer MTK (mediatek) devices usually request for an AUTHENTICATION CERTIFICATE TO FLASH.. here am sharing the file i have.. i have used it on two different phones.. makes me think it can work even on most devices out there...
forum.xda-developers.com
------------------
How to:
------------------
zero step:
----------
dissembler the back case of your phone. Disconnect the battery connector from motherboard. (if you have any difficulty to open the back case, just see it in youtube)
1st step:
-----------
open up spflash tool as Administrator and prepare it beforehand (later on in third step you must quickly switch the app in order to flash the device successfully).
Make sure to fill out the three inputs in download section tab:
-DA (download agent) if it already filled, then just leave it. if not, you must refer it to DA agent files inside your spflash tool folder. You could download seprately DA file from internet.
-fill up scatter file from stock firmware Rom.
Important ! Dont move or change the scatter file position in firmware folder! It must be inside the firmware folder!
-auth file ( point it out to the auth file)
-now just leave this app open, head onto 2nd step below!
2nd step:
------------
run: libusb win32.exe:
Tick on Install a Device Filter and Tap Next
-install libusb
-select install a device filter
-Press Volume Up (or down in another model)
-Insert the USB cable
-Now you can see the device’s COM Port in the LibUSB window, Click Install.
Click OK (tips: quickly click the device when it appeared!).
if u failed, just repeat the 2nd step again!
3rd step:
---------
-Run MTKbypassv4.exe
-Press Volume Up (other device use vol down thoug)
-Insert the USB cable into pc
-press bypass button in app
-make sure all ok/done (green color text)
-now quickly go to spflash app, click download button
eventually spflash will execute flashing the device, wait till it finish (download ok!)!
now try to connect the battery connector and boot it up
Voila, your hardbrick phone has come to life once again!
IMPORTANT!:
here in 3rd step, you would have BROM error (This error clearly means that the Flash Tool has issues finding the COM port on which your device is connected.) if u didnt quick enough to switch to spflash app and click downlod button. If this happen, just resume the 3rd step.
Hi please password to file mtkbypass... Thanks Man
esemokay said:
Hi please password to file mtkbypass... Thanks Man
Click to expand...
Click to collapse
use this:
Tajil said:
use this:
Click to expand...
Click to collapse
use this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have done these steps but it's showing error after flashing in SP flashtool. Please find a solution..
Hariz_mhd said:
View attachment 5878861View attachment 5878863I have done these steps but it's showing error after flashing in SP flashtool. Please find a solution..
Click to expand...
Click to collapse
that error have several indications,
one of them is your emmc nearly damage or have been damage. So, u must change u r emmc.
Try this first:
in your spflash, go to option, in tab general uncheck "storage life cycle check"
After flashing, I'm stuck at mi boot logo. Anyone encounter before?
Pinage said:
After flashing, I'm stuck at mi boot logo. Anyone encounter before?
Click to expand...
Click to collapse
have u tried this version ?
cactus_global_images_V11.0.9.0.PCBMIXM_20200916.0000.00_9.0_global_c0a9fb7059
Pinage said:
After flashing, I'm stuck at mi boot logo. Anyone encounter before?
Click to expand...
Click to collapse
have u tried this version ?
cactus_global_images_V11.0.9.0.PCBMIXM_20200916.0000.00_9.0_global_c0a9fb7059
is this will work on redmi note 7?