Im trying to flash a different official variant that could possibly help me pass the cri***t (carrier) compatibility check.
On their website they say that A32 5g is one of the compatible phones, but they do not allow the variant im using (a326br) to connect to their network.
I tried to flash the 326U1 XAA variant ROM using Odin. The OEM is unlocked by going to the download mode, but I still fail to flash XAA to it using patched Odin with default options (auto reboot, f. Reset time checked). I tried to flash the original variant and it worked, so not sure where I did wrong.
Do I need to extract the pit file from csc file to do the re-partion?
If not, could someone hint me or link me the instruction to properly flash a different variant to this phone?
Another question, I downloaded this 326U1 xaa because it is an unbrand variant, I assume it could bypass the compatibility issue, but there are some other places suggest me that if I flash the wrong ROM I could get my OEM locked permanently. May I ask what variant would be the best one for me to flash?
1 : if you flash CSC_OYM_A326U1OYM7BVE4_CL23893183_QB52067427_REV00_user_low_ship_MULTI_CERT.tar.md5 and not
HOME_CSC_OYMxxx you don't need to flash pit file
CSC_OYM_A326U1OYM7BVE4 =
HOME_CSC_OYM_A326U1OYM7BVE4 + A32X_USA_OPEN.pit
2: there is only one A326U1OYM firmware and it's a multi CSC firmware
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3: you can't downgrade firmware so take care witch version you try to flash
Not sure what I did wrong....
I used the CSC file instead of HOME CSC, but it seems like it is complaining about the partition.
Unchecked "BL" and try to flash again but still getting the same error.
A326U1UEU7BVE4_A326U1OYM7BVE4_USC is version 12, same as my current firmware version.
Phone was in download mode.
Related
flashing with odin always fails with message attached in odin
on display message is: MDM MODE: CAN'T DOWNLOAD (xbl)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I changed cables and USB ports and even the computer - it's always the same
Software on tablet: T865XXU2BTC7
Software to flash: T865XXU4BTK2
Google even didn't help
Any idea?
Tronje said:
flashing with odin always fails with message attached in odin
on display message is: MDM MODE: CAN'T DOWNLOAD (xbl)
View attachment 5239929
I changed cables and USB ports and even the computer - it's always the same
Software on tablet: T865XXU2BTC7
Software to flash: T865XXU4BTK2
Google even didn't help
Any idea?
Click to expand...
Click to collapse
U need to put CSC in CSC and not in USER DATA..
jaidev.s said:
U need to put CSC in CSC and not in USER DATA..
Click to expand...
Click to collapse
in userdata is home_csc file (I don't want to loose all my data and settings)
but I also tried with csc file in csc section with exact the same result
I think auth has something to do with authentification ...
Tronje said:
in userdata is home_csc file (I don't want to loose all my data and settings)
but I also tried with csc file in csc section with exact the same result
I think auth has something to do with authentification ...
Click to expand...
Click to collapse
it seemes I found the causer
it was a management app from my company
I'm trying to get my SM-G930W8 set up to work on AT&T's LTE only network so I can use VoLTE calls. I need to have this option available to me:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
These are the only options available to me currently:
I've downloaded several of the stock firmwares for this device, and I'm planning to flash them one after another until I get this setting. Which part of the firmware contains what I need (if it contains it at all), i.e. AP, CP, CSC, etc.?
Once I get this working, I'd like to try out the DevBase ROM, but I want to be sure it doesn't overwrite the LTE only part.
I've now flashed firmware for 4 of the 9 carrier-specific CSCs: BMC, BWA, ESK, and FMC. The "LTE only" option hasn't appeared in any of them. However, I flashed the HOME_CSC image instead of CSC image so that I wouldn't have to start over on my device again every time. Could that be the problem? Do I need a clean install to get this option?
I did a clean flash of KDO, and it still doesn't have the "LTE only" mode available.
I did another clean flash of KDO (I don't think there's actually much difference between the different firmwares available for this phone), then immediately flashed TWRP, then DevBase with the "xposed", "KCSC", and "skipvc" options, and now I have "LTE only" mode!!!
dude you don't need all that
just go to play store
install hidden settings for android
search for radioinfo in the app
tap it then you'll find set preferred network
set to LTE only
I need your help, my LG v50 in edl mode loop, i can't out edl mod and when i go to partition manager in QFIL tool but it's don't have abl_a, abl_b,..., partition has nothing, i try to help me please ( no fastboot, no download mode),
i had tried to flat rawprogram.xml but don't work.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You haven’t mentioned what version of V50 is it? If it is Verizon or Korean, you can easily reflash by going in download mode and doing partition upgrade.
Royaltiger said:
You haven’t mentioned what version of V50 is it? If it is Verizon or Korean, you can easily reflash by going in download mode and doing partition upgrade.
Click to expand...
Click to collapse
my devices is Korean (SKT)
Royaltiger said:
You haven’t mentioned what version of V50 is it? If it is Verizon or Korean, you can easily reflash by going in download mode and doing partition upgrade.
Click to expand...
Click to collapse
my device has no download mode, i think pin 0% so don't has download mode, if you know, can you help me please
follow my guide to flash rawprogram using unbrickbackup, it will get you out of edl mode. , then go to download mode and flash your korean kdz using lgup.
my device can boot, but SIM has error (no sim partitions) and no imei
luyen1241 said:
my device can boot, but SIM has error (no sim partitions) and no imei
Click to expand...
Click to collapse
Same problem, u can find the response?
I have rooted the phone with Magic Disk and TWRP with no issues. How to remove all that and put the phone on factory settings completely? I mean remove root, TWRP and lock bootloader?
Model: SM-A52F/DS
1Igrach said:
I have rooted the phone with Magic Disk and TWRP with no issues. How to remove all that and put the phone on factory settings completely? I mean remove root, TWRP and lock bootloader?
Model: SM-A52F/DS
Click to expand...
Click to collapse
Flash stock with Odin, lock the bootloader after you boot for the first time and you should be good.
I just need to flash it with stock firmware and it will remove everything?
Should I look for PDA or CSC match for firmware?
1Igrach said:
I just need to flash it with stock firmware and it will remove everything?
Should I look for PDA or CSC match for firmware?
Click to expand...
Click to collapse
PDA can be the same or newer, CSC can be whatever you want.
Flashing stock fw will replace everything yes. Your recovery, system and it will wipe your data completely. Make sure you backup your media
Thanks xD.
So I download official firmware from sammobile:
Download Samsung Galaxy A52 SM-A525F EUX Europe A525FXXS4BVD1 firmware
Fast download latest Samsung Galaxy A52 firmware SM-A525F from Europe with A525FXXS4BVD1 and Android version 12
www.sammobile.com
I getting this error when I try to flash it:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Problem was with Odin. Changed to 3.13 version and its working xD
I am having no end of problems trying to add new firmware using odin. I think the problem may be the firmware itself. The csc code is OXX as shown in the picture below. However, I can not find any firmware with that csc code. Will using firmware with a different csc code be the reason it will not work?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Blythlad said:
I am having no end of problems trying to add new firmware using odin. I think the problem may be the firmware itself. The csc code is OXX as shown in the picture below. However, I can not find any firmware with that csc code. Will using firmware with a different csc code be the reason it will not work?View attachment 5889331
Click to expand...
Click to collapse
Yes, probably. You need to find a firmware for your specific model number for your specific region/country/carrier and it also must have a binary version that is equal to or higher than the binary version of your currently installed firmware, it can not have a lower binary version than your currently installed firmware, it will not allow you to flash a lower binary version.
The binary version is indicated by the 5th character from the right end of your firmware build number.
about A520F OXX firmware :
firmwares:
Download SM-A520F / Galaxy A5 SM-A520F XEU in Samfw - Samsung firmware download
SM-A520F / Galaxy A5 SM-A520F XEU samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com