pleaz need help pleaz brothers - Huawei P40 Pro Questions & Answers

i have p40 pro
Chimera Mobile Phone Utility version: 32.27.1139 @ 2022-06-11
Gathering information...
Device Model: ELS-N04
Current software version: ELS-N29 10.1.0.104(C652E5R3P1)
Hardware version: Ver3.0
Boot info: locked
Image check: secure image verify success
Android version: 10
Battery state: 4046mv
Key version: huawei_key_v1
Root info: SAFE
Rescue version: rescue0.7
Phone info: (bootloader) main version do not exist in oeminfo!
VendorCountry: hw/eea
Base version: ELS-LGRP4-OVS 10.1.0.104
Cust version: ELS-N29-CUST 10.1.0.5(C652)
Preload version: ELS-N29-PRELOAD 10.1.0.1(C652R3)
Finished at local time: [06.11.22 16:43:38]
i try to downgrade the device wthe this firm
Huawei P40 ANA-NX9 ANA-N29 hw eu HLRCF Anna-N29CB 10.1.0.114(C432E6R5P2) Firmware EMUI10.1.0 05016PSQ
device naw show this iinfo
Chimera Mobile Phone Utility version: 32.27.1139 @ 2022-06-13
Printing phone history
Usb Firmware Update
13/06/2022
19:56
Read Cert
13/06/2022
19:47
Get Info
11/06/2022
15:44
Gathering information...
Current software version: Error
Hardware version: Ver3.0
Boot info: locked
Image check: secure image verify success
Android version: 10
Battery state: 3717mv
Key version: huawei_key_v1
Root info: SAFE
Rescue version: rescue0.7
Phone info: (bootloader) main version do not exist in oeminfo!
VendorCountry: hw/eea
Base version: ELS-LGRP4-OVS 10.1.0.104
Cust version: ELS-N29-CUST 10.1.0.5(C652)
Preload version: ELS-N29-PRELOAD 10.1.0.1(C652R3)
Finished at local time: [06.13.22 21:37:34]
device powred on and for 5min restart
itry to reflashe device but device not accept anu firm
Chimera Mobile Phone Utility version: 32.27.1139 @ 2022-06-15
Printing phone history
Modify Oeminfo
15/06/2022
00:26
Imei Recovery
15/06/2022
00:23
Imei Recovery
14/06/2022
23:56
Get Info
13/06/2022
23:53
Load Factory Fastboot
13/06/2022
22:43
Update firmware
Firmware selection
Opening the file
Unpacking the archive...
Unpacking the archive...
Processing BASE_VERLIST .
Processing BASE_VER .
Processing PACKAGE_TYPE .
Processing HISIUFS_GPT .
Processing XLOADER .
Processing FASTBOOT .
Processing BL2 .
Processing BOOT .
Processing DTBO .
Processing VECTOR .
Processing FW_LPM3 .
Processing HHEE .
Processing VBMETA .
Processing TEEOS .
Processing TRUSTFIRMWARE .
Processing HIEPS .
Processing SENSORHUB .
Processing FW_HIFI .
Processing MODEMNVM_UPDATE .
Processing MODEMNVM_CUST .
Processing MODEM_DRIVER .
Processing RECOVERY .
Processing RECOVERY_RAMDISK .
Processing RECOVERY_VENDOR .
Processing RECOVERY_VBMETA .
Processing PREAS .
Processing PREAVS .
Processing ERECOVERY .
Processing ERECOVERY_RAMDISK .
Processing ERECOVERY_VENDOR .
Processing ERECOVERY_VBMETA .
Processing ENG_VENDOR .
Processing ENG_SYSTEM .
Processing HDCP .
Processing CACHE .
Processing RAMDISK .
Processing SUPER .
Processing SUPER .
Processing METADATA .
Processing VBMETA_SYSTEM .
Processing VBMETA_VENDOR .
Processing VBMETA_ODM .
Processing VBMETA_HW_PRODUCT .
Processing VBMETA_CUST .
Processing ISP_FIRMWARE .
Processing MODEM_FW .
Processing IVP .
Processing NPU .
Processing HISEE_IMG .
Processing USERDATA .
Processing VERSION .
Processing PRELOAD .
Processing PATCH .
Processing KPATCH .
Opening the file
Unpacking the archive...
Unpacking the archive...
Processing CUST_VERLIST .
Processing CUST_VER .
Processing PACKAGE_TYPE .
Processing PTABLE_CUST .
Processing VERSION .
Opening the file
Unpacking the archive...
Unpacking the archive...
Processing PRELOAD_VERLIST .
Processing PRELOAD_VER .
Processing PACKAGE_TYPE .
Processing PTABLE_PRELOAD .
Processing PRELOAD .
Pre-processing APP files
Processing C:/Users/Abd-elkader/AppData/Local/Temp/CHIMERA_jpQAGYptable.app
Validating base file
Processing C:/Users/Abd-elkader/AppData/Local/Temp/CHIMERA_UWSMJwupdate.app
Validating customization file
Processing C:/Users/Abd-elkader/AppData/Local/Temp/CHIMERA_SxiFYzupdate.app
Validating preload file
Processing C:/Users/Abd-elkader/AppData/Local/Temp/CHIMERA_pFhAORupdate.app
Rebooting phone to USB update mode
Flashing ERECOVERY files
Processing C:/Users/Abd-elkader/AppData/Local/Temp/CHIMERA_jpQAGYptable.app
Flashing SHA256RSA
Flashing CRC
Flashing BASE_VERLIST
Firmware is incompatible with the phone's current firmware version. The error was received during the flashing of base file.You can try again with checked override phone's version checkbox on the firmware selector dialog.
Operation failed
Finished at local time: [06.15.22 02:04:45]
log chemera tool
itry wthe alll this firm
ELS-N29 10.1.0.104D(C819E5R3P1)_Firmware_EMUI10.1.0_05016PNJ F
Elsa-N29D 1ELS-N29 10.1.0.121D(C652E6R3P1)_Firmware_EMUI10.1.0_05016PNA
ELS-N29 10.1.0.121D(C652E6R3P1)_Firmware_EMUI10.1.0_05016PNA F
devices dnot accept any update
device no show kayborde on normal mode
sory for my bad enghlish

phone in normal mode show usb inknown cant conect wthe hcuit
devices conect wthe otg and fastboot and update mode
dos conect wthe adb and hdr

You have no idea what you are doing. You are trying all firmware without any sense. Hm. Stop trying. I will try to help you ASAP.

need a good firm

badmania98 said:
You have no idea what you are doing. You are trying all firmware without any sense. Hm. Stop trying. I will try to help you ASAP.
Click to expand...
Click to collapse
ok voici la 1ere info
Version de l'utilitaire de téléphonie mobile Chimera : 32.27.1139 @ 2022-06-11
La collecte d'informations...
Modèle d'appareil : ELS-N04
Version actuelle du logiciel : ELS-N29 10.1.0.104(C652E5R3P1)
Version matérielle : Ver3.0
Informations de démarrage : verrouillé
Vérification d'image : réussite de la vérification d'image sécurisée
Version Androïd : 10
État de la batterie : 4 046 mv
Version clé : huawei_key_v1
Informations racine : SAFE
Version de secours : rescue0.7
Info téléphone : la version principale (bootloader) n'existe pas dans oeminfo !
Pays du vendeur : hw/eea
Version de base : ELS-LGRP4-OVS 10.1.0.104
Version client : ELS-N29-CUST 10.1.0.5(C652)
Version préchargée : ELS-N29-PRELOAD 10.1.0.1(C652R3)
Terminé à l'heure locale : [06.11.22 16:43:38]
Mod translation via GT:
ok here is the first info
Chimera Mobile Phone Utility Version: 32.27.1139 @ 2022-06-11
Gathering information...
Device model: ELS-N04
Current software version: ELS-N29 10.1.0.104(C652E5R3P1)
Hardware Version: Ver3.0
Boot Info: Locked
Image Verification: Secure Image Verification Passed
Android Version: 10
Battery status: 4046 mv
Key version: huawei_key_v1
Root Information: SAFE
Rescue version: rescue0.7
Phone info: the main version (bootloader) does not exist in oeminfo!
Seller's country: hw/eea
Basic version: ELS-LGRP4-OVS 10.1.0.104
Client version: ELS-N29-CUST 10.1.0.5(C652)
Preloaded version: ELS-N29-PRELOAD 10.1.0.1(C652R3)
Ended local time: [06.11.22 16:43:38]

HI BRO WE ARE YOU ,,,???NEED SOME HELP PLEAZ NAW PHONE SHOW P40 ANA

Post screenshots of this menu (will be 2):
Firmware details in ProjectMenu: dial *#*#2846579#*#* \2.Veneer Information\1. Version Info
How did you made the downgrade?

1ST downgrade WTHE WTHE CHEMERA TOOL AND I USE I BAD FRIM
Huawei P40 ANA-NX9 ANA-N29 hw eu HLRCF Anna-N29CB 10.1.0.114(C432E6R5P2) Firmware EMUI10.1.0 05016PSQ
WTHE OTG
VRAI WTHE 1 FRIM
ANA-N29 10.1.0.114Version de base ELS-LGRP4-OVS 10.1.0.104)_Firmware_EMUI10.1.0_05016PSQ Fichier par (Support.HalabTech.Com)_2
PHONE RESTATE IN 50 SEC AND NO IMEI

Talk to this guy here.

Related

Sony Xperia Z3 D6603 Dead After Flash

HELLO .
After that the phone not connecting on flash mode.On device manager it show as SEMC Flash Device also not booting on setool and flash tool
and this the info before and after flash
****************Information Before flash****************
RUNNING S1_BOOT VER "S1_Boot_MSM8974AC_LA3.0_55"
ACTIVE_COMP_AID : 0004
HWCONF_AID : 0004
LOADER_AID : 0004
BOOT_AID : 0004
[ llcomm: 00080000,00080000 ]
DEVICE ID: 0CACFA51
FLASH ID: "0011/01000000"
LOADER VERSION: MSM8974AB_27
PHONE IMEI : 35427806021846
MODEL (from GDFS): D6603
SOFTWARE VERSION: 1282-2729_23.0.D.1.123
CUSTOM VERSION: 1286-4514_R16B
FILESYSTEM VERSION: APAC-LTE_23.0.A.2.93
SERIAL NO: CB5A217SWP
SECURITY UNITS BACKUP CREATED
Elapsed: 37 seconds
****************after flash****************
UNNING v 1.1425/01.15/UNI
CARD SERIAL xxxxxxxx
USBFLASH DRIVER VERSION 03.00.00.00
SIGNED MODE (USING SERVER)
CFG:100000000000
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD "BACK" OR "VOLUME DOWN" BUTTON ...
RUNNING S1_BOOT VER "S1_Boot_MSM8974AC_LA3.0_55"
ACTIVE_COMP_AID : 0004
HWCONF_AID : 0004
LOADER_AID : 0004
BOOT_AID : 0004
[ llcomm: 00080000,00080000 ]
DEVICE ID: 0CACFA51
FLASH ID: "0011/01000000"
LOADER VERSION: MSM8974AB_27
PHONE IMEI : 35427806021846
MODEL (from GDFS): D6603
SOFTWARE VERSION: 1282-2729_23.0.D.1.123
CUSTOM VERSION: 1286-4514_R16B
FILESYSTEM VERSION: APAC-LTE_23.0.A.2.93
SERIAL NO: CB5A217SWP
SECURITY UNITS BACKUP CREATED
Elapsed: 37 seconds
SIGNED MODE (USING SERVER)
CFG:100000000000
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD "BACK" OR "VOLUME DOWN" BUTTON ...
llbug: read error: "The device does not recognize the command"
supported phone was not detected
FAILED TO SETUP PHONE
Elapsed: 20 seconds
SIGNED MODE (USING SERVER)
CFG:100000000000
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD "BACK" OR "VOLUME DOWN" BUTTON ...
llbug: read error: "The device does not recognize the command"
supported phone was not detected
FAILED TO SETUP PHONE
Elapsed: 45 seconds
SIGNED MODE (USING SERVER)
CFG:100000000000
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD "BACK" OR "VOLUME DOWN" BUTTON ...
RUNNING S1_BOOT VER "S1_Boot_MSM8974AC_LA3.0_55"
ACTIVE_COMP_AID : 0004
HWCONF_AID : 0004
LOADER_AID : 0004
BOOT_AID : 0004
[ llcomm: 00080000,00080000 ]
DEVICE ID: 0CACFA51
FLASH ID: "0011/01000000"
LOADER VERSION: MSM8974AB_27
PHONE IMEI : 35427806021846
writing "K:\box flasher\[email protected]\flash sony ericsson\D6603\APP-SW_Leo_GENERIC_23.5.A.1.291_1282-2729_S1-SW-LIVE-9C84-PID1-00 ...
Processing package
APP-SW_Leo_GENERIC_23.5.A.1.291_1282-2729_S1-SW-LIVE-9C84-PID1-0006-MBR.zip
Testing package integrity ...
PROCESSING: partition-image_S1-SW-LIVE-9C84-PID1-0006-MBR.sin
UPDATING S1_BOOT TO VERSION : 1286-7314 S1_BOOT_MSM8974AC_LA3.0-M-3
PARSING: "DEVELOPMENT"
value OTP_LOCK_STATUS_1 : UNLOCKED, not match LOCKED
PARSING: "TEST_OEM0_007B40E1"
value OTP_LOCK_STATUS_1 : LOCKED, match LOCKED
value OTP_DATA_1 : 00000100, not match 01000400
value IDCODE_1 : 007B40E1, match 007B40E1
PARSING: "PRECOMMERCIAL_007B40E1"
value OTP_LOCK_STATUS_1 : LOCKED, match LOCKED
value OTP_DATA_1 : 01000400, match 01000400
value IDCODE_1 : 007B40E1, match 007B40E1
PROCESSING : rpm_S1_Boot_MSM8974AC_LA3_0_M_3_AID_4_PLATFORM-MSM8974AC-LIVE-HWID007B40E1-SWID0A-OEM1-AID4-DEBUG00_S1-BOOT ...
PROCESSING : s1sbl_S1_Boot_MSM8974AC_LA3_0_M_3_AID_4_PLATFORM-MSM8974AC-LIVE-HWID007B40E1-SWID65-OEM1-AID4-DEBUG00_S1-BO ...
PROCESSING : emmc_appsboot_S1_Boot_MSM8974AC_LA3_0_M_3_AID_4_PL ATFORM-MSM8974AC-LIVE-HWID007B40E1-SWID09-OEM1-AID4-DEBUG ...
PROCESSING : sbl1_S1_Boot_MSM8974AC_LA3_0_M_3_AID_4_PLATFORM-MSM8974AC-LIVE-HWID007B40E1-SWID00-OEM1-AID4-DEBUG00_S1-BOO ...
PROCESSING : tz_S1_Boot_MSM8974AC_LA3_0_M_3_AID_4_PLATFORM-MSM8974AC-LIVE-HWID007B40E1-SWID07-OEM1-AID4-DEBUG00_S1-BOOT- ...
PROCESSING : dbi_S1_Boot_MSM8974AC_LA3_0_M_3_AID_4_PLATFORM-MSM8974AC-LIVE-HWID007B40E1-SWID12-OEM1-AID4-DEBUG00_S1-BOOT ...
PROCESSING : Leo_S1BootConfig_MiscTA.ta
Writing TA unit 0002/084F/0061
Writing TA unit 0002/08FD/0001
BOOT UPDATED
SKIP: partition-image_S1-SW-LIVE-9C84-PID1-0006-MBR.sin
PROCESSING: apps_log_S1-SW-LIVE-9C84-PID1-0006-MMC.sin
PROCESSING: cache_S1-SW-LIVE-9C84-PID1-0006-MMC.sin
PROCESSING: kernel_S1-SW-LIVE-9C84-PID1-0006-MMC.sin
PROCESSING: fotakernel_S1-SW-LIVE-9C84-PID1-0006-MMC.sin
writing "K:\box flasher\[email protected]\flash sony ericsson\D6603\FSP_Leo_Customized-MEA_GLOBAL-LTE_23.5.A.1.291_1288-4387_R4D_S1-S ...
Processing package
FSP_Leo_Customized-MEA_GLOBAL-LTE_23.5.A.1.291_1288-4387_R4D_S1-SW-LIVE-9C84-PID1-0006-MMC.zip
Testing package integrity ...
PROCESSING: userdata_S1-SW-LIVE-9C84-PID1-0006-MMC.sin
PROCESSING: system_S1-SW-LIVE-9C84-PID1-0006-MMC.sin
PROCESSING: amss_fs_1_S1-MODEMSW-LIVE-9C84-PID1-0006-MMC.sin
PROCESSING: amss_fs_2_S1-MODEMSW-LIVE-9C84-PID1-0006-MMC.sin
PROCESSING: amss_fsg_S1-MODEMSW-LIVE-9C84-PID1-0006-MMC.sin
Processing UPDATE files
SKIP: simlock.ta
PROCESSING: cust-reset.ta
Writing TA unit 0002/08A4/000E
PROCESSING: fota-reset.ta
Writing TA unit 0002/0964/0001
PROCESSING: auto-boot.ta
Writing TA unit 0002/0907/0001
PROCESSING: osv-restriction.ta
Writing TA unit 0002/091A/0001
Elapsed: 323 seconds
****************Flash fully complete****************
help. i need solution and thanks advance
and thank you for your attention

mtk6737 baseband unknown and imei blank..how to repair

my phone model- CENTRIC CM2221
android -6.0
problem- no service
i check imei blank and baseband unknown .
how to solve ?
please provide me stock rom or good solution ..
Phone Info Log .........
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 16 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 510001154D333238E8020042AF2EBAF4
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM328
[eMMC] : FLASH_CID : 150100513832334D420002E8F4BA73AF
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 0xEF0B331D1BA71095953C8F7CFAA875FB
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
You cm2 to Repaire baseband
Sent from my iPhone using Tapatalk Pro
abuk91 said:
You cm2 to Repaire baseband
Sent from my iPhone using Tapatalk Pro
Click to expand...
Click to collapse
bro allready try but not done .....need flash file
no solution????????????????????????????????????????????????????????????
I have the same problem
phone accent neon no service imei not found
I'm looking for rom file for this model

need MTK6737 cpu .....nv data

need MTK6737 cpu .....nv data
please give me any read nv file for mt6737 cpu.....
Raj_App said:
need MTK6737 cpu .....nv data
please give me any read nv file for mt6737 cpu.....
Click to expand...
Click to collapse
That's not a wise request (and I don't think it's legal).
NVDATA contains IMEI information (and you know it). An IMEI is unique for a device. One device, one IMEI. What you're asking is requesting someone else to share their IMEI with you. Two phones with the same IMEI is not legal.
Restore your ORIGINAL NVDATA to get back your original IMEI.
Nonta72 said:
That's not a wise request (and I don't think it's legal).
NVDATA contains IMEI information (and you know it). An IMEI is unique for a device. One device, one IMEI. What you're asking is requesting someone else to share their IMEI with you. Two phones with the same IMEI is not legal.
Restore your ORIGINAL NVDATA to get back your original IMEI.
Click to expand...
Click to collapse
Wait for phone...
Phone found! [ 16 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 510001154D333238E8020042AF2EBAF4
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM328
[eMMC] : FLASH_CID : 150100513832334D420002E8F4BA73AF
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 0xEF0B331D1BA71095953C8F7CFAA875FB
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
[Info] : BaseBand : MT6735_S00_MOLY_LR9_W1444_MD_LWTG_MP_V79_P20_1_lwg_n
Read Error , NVRAM area is blank or damaged
Operation Failed
Elapsed: 00:00:29
Reconnect Power/Cable!
Raj_App said:
Read Error , NVRAM area is blank or damaged
Operation Failed
Click to expand...
Click to collapse
Use SP Flash Tools to flash your stock rom.
Nonta72 said:
Use SP Flash Tools to flash your stock rom.
Click to expand...
Click to collapse
bro i tired ..not found rom
please help me
Raj_App said:
bro i tired ..not found rom
please help me
Click to expand...
Click to collapse
Find it on your manufacturer's website or needrom.com

F1s bricked need help

Hello
I've bricked Oppo F1s when I've tried to flash it
this is infinity read info log
Wait for phone...
Phone found! [ 1087 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : BROM
[DA_ERROR] : DRAM Configure failed!
ErroCode : 0x2122and I get this message error if I try to flash it with MT6750
Error: STATUS_INSUFFICIENT_BUFFER
EMICFG_NOT_ACCEPTED_CONFIG
Boot Error!
Operation Failed
Elapsed: 00:00:52
Reconnect Power/Cable!
Click to expand...
Click to collapse
it says that's an MT6755 processor , but when I try to flash it with Mt6755 with sp flashtool and NCK mtk soft it says that's version mismatch and it's and MT6750 device
Can you help to choose the right firmware please ?
octopus82 said:
Hello
I've bricked Oppo F1s when I've tried to flash it
this is infinity read info log
it says that's an MT6755 processor , but when I try to flash it with Mt6755 with sp flashtool and NCK mtk soft it says that's version mismatch and it's and MT6750 device
Can you help to choose the right firmware please ?
Click to expand...
Click to collapse
I have pretty much the same problem with my MOTO M (XT1662). It happened after I did the "Format whole flash" in SP flash tool.
Now the SP flash tool is giving me the following,
Chip Info
=======
Chip name: MT6755
Chip Version: 0x0000cb00
Ext Clock: EXT_26M
Extern RAM Type: DRAM
Extern RAM Size: 0xc0000000 (!!!)
SRAM Size: 0x00040000
EMMC Flash
=========
Boot 1 Size: 0x400000
Boot 2 Size: 0x400000
RPMB Size: 0x400000
GP1 Size: 0x0 (same for GP2, GP3 and GP4)
UA Size: 0x747c00000
No matter what ROM I'm trying to flash (stock or custom) , I always get the error "STATUS_INSUFFICIENT_BUFFER (0xC0010007)".
It looks like it has to do something with the External RAM Size (0xc0000000).
I found this firmware "XT1662_Kungfu_m_MT6755_USR_S0924_1612291517_mp7V2.3_CN (RepairMyMobile.in)", which seems to be what I need but I can't get pass this error.
Any help will be greatly appreciated.
i have the same problem
STATUS_INSUFFICIENT_BUFFER (0xC0010007)
i try to update with OTA and failed too
anyone can help ?

[CLOSED] pleaz need help pleaz brothers

have p40 pro
Chimera Mobile Phone Utility version: 32.27.1139 @ 2022-06-11
Gathering information...
Device Model: ELS-N04
Current software version: ELS-N29 10.1.0.104(C652E5R3P1)
Hardware version: Ver3.0
Boot info: locked
Image check: secure image verify success
Android version: 10
Battery state: 4046mv
Key version: huawei_key_v1
Root info: SAFE
Rescue version: rescue0.7
Phone info: (bootloader) main version do not exist in oeminfo!
VendorCountry: hw/eea
Base version: ELS-LGRP4-OVS 10.1.0.104
Cust version: ELS-N29-CUST 10.1.0.5(C652)
Preload version: ELS-N29-PRELOAD 10.1.0.1(C652R3)
Finished at local time: [06.11.22 16:43:38]
i try to downgrade the device wthe this firm
Huawei P40 ANA-NX9 ANA-N29 hw eu HLRCF Anna-N29CB 10.1.0.114(C432E6R5P2) Firmware EMUI10.1.0 05016PSQ
device naw show this iinfo
Chimera Mobile Phone Utility version: 32.27.1139 @ 2022-06-13
Printing phone history
Usb Firmware Update
13/06/2022
19:56
Read Cert
13/06/2022
19:47
Get Info
11/06/2022
15:44
Gathering information...
Current software version: Error
Hardware version: Ver3.0
Boot info: locked
Image check: secure image verify success
Android version: 10
Battery state: 3717mv
Key version: huawei_key_v1
Root info: SAFE
Rescue version: rescue0.7
Phone info: (bootloader) main version do not exist in oeminfo!
VendorCountry: hw/eea
Base version: ELS-LGRP4-OVS 10.1.0.104
Cust version: ELS-N29-CUST 10.1.0.5(C652)
Preload version: ELS-N29-PRELOAD 10.1.0.1(C652R3)
Finished at local time: [06.13.22 21:37:34]
device powred on and for 5min restart
itry to reflashe device but device not accept anu firm
Chimera Mobile Phone Utility version: 32.27.1139 @ 2022-06-15
Printing phone history
Modify Oeminfo
15/06/2022
00:26
Imei Recovery
15/06/2022
00:23
Imei Recovery
14/06/2022
23:56
Get Info
13/06/2022
23:53
Load Factory Fastboot
13/06/2022
22:43
Update firmware
Firmware selection
Opening the file
Unpacking the archive...
Unpacking the archive...
Processing BASE_VERLIST .
Processing BASE_VER .
Processing PACKAGE_TYPE .
Processing HISIUFS_GPT .
Processing XLOADER .
Processing FASTBOOT .
Processing BL2 .
Processing BOOT .
Processing DTBO .
Processing VECTOR .
Processing FW_LPM3 .
Processing HHEE .
Processing VBMETA .
Processing TEEOS .
Processing TRUSTFIRMWARE .
Processing HIEPS .
Processing SENSORHUB .
Processing FW_HIFI .
Processing MODEMNVM_UPDATE .
Processing MODEMNVM_CUST .
Processing MODEM_DRIVER .
Processing RECOVERY .
Processing RECOVERY_RAMDISK .
Processing RECOVERY_VENDOR .
Processing RECOVERY_VBMETA .
Processing PREAS .
Processing PREAVS .
Processing ERECOVERY .
Processing ERECOVERY_RAMDISK .
Processing ERECOVERY_VENDOR .
Processing ERECOVERY_VBMETA .
Processing ENG_VENDOR .
Processing ENG_SYSTEM .
Processing HDCP .
Processing CACHE .
Processing RAMDISK .
Processing SUPER .
Processing SUPER .
Processing METADATA .
Processing VBMETA_SYSTEM .
Processing VBMETA_VENDOR .
Processing VBMETA_ODM .
Processing VBMETA_HW_PRODUCT .
Processing VBMETA_CUST .
Processing ISP_FIRMWARE .
Processing MODEM_FW .
Processing IVP .
Processing NPU .
Processing HISEE_IMG .
Processing USERDATA .
Processing VERSION .
Processing PRELOAD .
Processing PATCH .
Processing KPATCH .
Opening the file
Unpacking the archive...
Unpacking the archive...
Processing CUST_VERLIST .
Processing CUST_VER .
Processing PACKAGE_TYPE .
Processing PTABLE_CUST .
Processing VERSION .
Opening the file
Unpacking the archive...
Unpacking the archive...
Processing PRELOAD_VERLIST .
Processing PRELOAD_VER .
Processing PACKAGE_TYPE .
Processing PTABLE_PRELOAD .
Processing PRELOAD .
Pre-processing APP files
Processing C:/Users/Abd-elkader/AppData/Local/Temp/CHIMERA_jpQAGYptable.app
Validating base file
Processing C:/Users/Abd-elkader/AppData/Local/Temp/CHIMERA_UWSMJwupdate.app
Validating customization file
Processing C:/Users/Abd-elkader/AppData/Local/Temp/CHIMERA_SxiFYzupdate.app
Validating preload file
Processing C:/Users/Abd-elkader/AppData/Local/Temp/CHIMERA_pFhAORupdate.app
Rebooting phone to USB update mode
Flashing ERECOVERY files
Processing C:/Users/Abd-elkader/AppData/Local/Temp/CHIMERA_jpQAGYptable.app
Flashing SHA256RSA
Flashing CRC
Flashing BASE_VERLIST
Firmware is incompatible with the phone's current firmware version. The error was received during the flashing of base file.You can try again with checked override phone's version checkbox on the firmware selector dialog.
Operation failed
Finished at local time: [06.15.22 02:04:45]
log chemera tool
pleaz need help
@kaderts44 Thread closed as duplicate of
pleaz need help pleaz brothers
i have p40 pro Chimera Mobile Phone Utility version: 32.27.1139 @ 2022-06-11 Gathering information... Device Model: ELS-N04 Current software version: ELS-N29 10.1.0.104(C652E5R3P1) Hardware version: Ver3.0 Boot info: locked Image check: secure...
forum.xda-developers.com
that I've moved to the Q&A section.
Please review the XDA Forum Rules with special emphasis on rule no. 5 and post only ONCE! Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator

Categories

Resources