Related
Hello everyone,
I've been tinkering around with Generic System Images since the Oreo Developer Preview 1 came out for the Razer Phone. I'm glad to say I got it to work, with lots of help from @MishaalRahman, @P4Block and indirect help of @phhusson and @TheCrazyLex.
What's working as of right now:
- GPS
- Rear Camera (only one of the lenses, needs further testing/pulling the Razer camera app apk)
- Front camera
- Microphones
- Sensors, each and every of them
- Speakers, sound playback, videoplayback (needs further testing)
- Fingerprint scanner
- WiFi, Bluetooth, NFC
- 120Hz screen features
- Color adjustments from the Oreo DP1 by Razer
- 4G LTE
- In-Call audio
What needs further testing:
- 4G/LTE FIXED check out post #77!
- Once the above is confirmed to work => VoLTE on any carrier, and also testing on certain carriers like 3 UK (since they sold a version with different software).
What's broken:
- Audio in phone calls (works properly in VoIP/3rd party apps) FIXED check out post #48!
What ROMs can be booted with this (as of 30-03-2018):
AOSP 8.1
Lineage OS 15.1
Resurrection Remix
More to come...
Setting up your device:
You'll need:
Code:
To [URL="https://forum.xda-developers.com/razer-phone/how-to/guide-to-unlocking-bootloader-t3706462"]fully unlock your bootloader[/URL] and [URL="https://forum.xda-developers.com/showpost.php?p=74607352&postcount=8"]unlock flashing capabilities[/URL] on your device.
[URL="https://eu.dl.twrp.me/cheryl/twrp-3.2.1-0-cheryl.img.html"]TWRP image[/URL] + [URL="https://eu.dl.twrp.me/cheryl/twrp-installer-3.2.1-0-cheryl.zip.html"]TWRP injector[/URL]
[URL="http://tiny.cc/latestmagisk"]Magisk flashable zip[/URL]
A GSI of your preference from the ones listed [URL="https://forum.xda-developers.com/project-treble/trebleenabled-device-development"]here[/URL]. PS: Use the Gapps+SU one if you choose AOSP ;)
0. Make sure you're running the Android O DP1 from Razer, or any future update to it.
THIS WON'T WORK ON NOUGAT
1. Properly install TWRP on your device: (I'll be using @Dees_Troy's guide with a few modifications to make very sure everything will work as intended)
- fastboot flash the twrp image as explained by him, in your currently active boot partition. PS: After flashing the Android O DP1, it will always be A.
Dees_Troy said:
Once you have adb working, run this command: adb shell getprop ro.boot.slot_suffix
It should say: [ro.boot.slot_suffix]: [_a] Or: [ro.boot.slot_suffix]: [_b]
Make note of whether you are currently using slot A or B. Next power off the device and boot to the bootloader using your USB cable and volume down. You want to switch to the other boot slot. If you are currently on slot A, type this: fastboot --set-active=_b Or on slot B type this: fastboot --set-active=_a
You should see something like this: Setting current slot to 'a'... OKAY [ 0.042s] finished. total time: 0.042s
I found the bootloader on the Razer Phone to be extremely finicky and I had to run the command multiple times until I got it to run successfully. You may have to hold the power button for 15 seconds to force power off the device and then re-enter fastboot mode. Keep trying until it works. Once it's on the right boot slot, type this: fastboot flash boot twrp-3.2.1-0-cheryl.img && fastboot reboot
Click to expand...
Click to collapse
2. Once you're in TWRP, DO NOT SLIDE to allow modifications, but tap on Mount as Read Only. Plug in your USB cable, and adb push the boot image from the Android O DP1 factory image to your sdcard, as well as the TWRP injector and the Magisk zip. That can be done with the following commands:
Code:
adb push twrp-installer-3.2.1-0-cheryl.zip /sdcard
Code:
adb push path/to/the/factoryimage/boot.img /sdcard
Code:
adb push Magisk-16.0.zip /sdcard
3. Go into Reboot, then make sure you're on partition A. Else, tap on the button to set A as the active partition.
Now go back, tap Install, then tap on 'Install Image' then choose the boot.img you just pushed, and flash it as boot image.
Now go back, into Reboot, and move to partition B and repeat the step above.
Once you're sure both partitions only contain the unmodified boot images, set the partition A as active, go into Install, choose the twrp-installer-3.2.1-0-cheryl.zip and flash it.
Once it finishes, do the same with the Magisk zip file.
4. Go into Reboot, press on Bootloader.
5. Connect the usb cable, and flash the GSI system image onto your system_a partition through fastboot from your pc. This can be done with the command:
Code:
fastboot flash system_a system-arm64-ab.img
5.b If you wish, you can install a different GSI onto your system_b partition, and that can be done with the following commands:
Code:
fastboot set_active b
Code:
fastboot flash system_b system-arm64-ab-gapps-su.img
5.c If you wish to go back to the system_a partition, you can execute:
Code:
fastboot set_active a
6. Reboot and enjoy.Prebuilt boot image:
If doing the steps from 1-4 seems messy or you don't get it to work properly, I've published the image I made following them with the latest Magisk and TWRP versions available as of April 20th 2018.
You can download it from here. You can then flash it from fastboot by using the commands:
Code:
fastboot flash boot_a boot_linuxct_20180420_cheryl_omr0.img
Code:
fastboot flash boot_b boot_linuxct_20180420_cheryl_omr0.img
SHA-2: 2f0c7348ac906f2f81fa39df7b24b69392783bd2379d5da357777be444c67d97
Old version (from ODP1 - may experience the bootloader issues):
You can download it from here. You can then flash it from fastboot by using the commands:
Code:
fastboot flash boot_a boot_linuxct_20180330_cheryl_odp1.img
Code:
fastboot flash boot_b boot_linuxct_20180330_cheryl_odp1.img
SHA-2: 8f763162415167b2e919a450654f9a46f69b81f6853013bcabf362dfeb2a115e
Many thanks to everyone that helped me today to get this to work properly!
Want some screenshots?
Thanks for all the hard work!
I've followed the guide but after flashing the GSI I get stuck at the Android logo and the system never boots?
Any help would be appreciated
PupPupG said:
Thanks for all the hard work!
I've followed the guide but after flashing the GSI I get stuck at the Android logo and the system never boots?
Any help would be appreciated
Click to expand...
Click to collapse
Did you follow all the steps carefully? Did you make sure you flashed Magisk?
Magisk is needed since it disables DM-Verity, which is what IMO gets the device stuck at first boot.
Oh, and also, sometimes during first boot your device gets encrypted. Mine took a bit extra that time (specifically booting the LineageOS image).
If you can't still get it to work, try with the prebuilt boot image.
This is awesome!!!
I'd love to have a fully working resurrection remix build working on my cheryl!!!!! =D <3
KEEP UP THIS AWESOME WORK!!!!!!!!!
linuxct said:
Did you follow all the steps carefully? Did you make sure you flashed Magisk?
Magisk is needed since it disables DM-Verity, which is what IMO gets the device stuck at first boot.
Oh, and also, sometimes during first boot your device gets encrypted. Mine took a bit extra that time (specifically booting the LineageOS image).
If you can't still get it to work, try with the prebuilt boot image.
Click to expand...
Click to collapse
I tried again using all of the info but they closest I've gotten to a boot is the Android logo and then a prompt to decrypt but no matter what I enter I get "Decryption Unsuccessful" and it just brings me back to TWRP
PupPupG said:
I tried again using all of the info but they closest I've gotten to a boot is the Android logo and then a prompt to decrypt but no matter what I enter I get "Decryption Unsuccessful" and it just brings me back to TWRP
Click to expand...
Click to collapse
Flash the Oreo DP1 image and start over.
linuxct said:
Flash the Oreo DP1 image and start over.
Click to expand...
Click to collapse
From what I can tell, TWRP cannot format the data partition properly which is what causes LOS to appear as encrypted and won't finish booting. I was able to successfully able to get it to boot by flashing the stock boot.img and booting to stock recovery and factory reset that way. After doing that, flash your ROM of choice and Magisk and it should be usable.
ThatGuy94 said:
From what I can tell, TWRP cannot format the data partition properly which is what causes LOS to appear as encrypted and won't finish booting. I was able to successfully able to get it to boot by flashing the stock boot.img and booting to stock recovery and factory reset that way. After doing that, flash your ROM of choice and Magisk and it should be usable.
Click to expand...
Click to collapse
Flashing the Oreo DP1 image actually flashes an empty, non-encrypted userdata image. That's why I requested to start over.
That can also be another solution, bit messier than starting over but it's good.
Does anyone have Magisk fully working with this? I still get ctsprofile:false
Aside from this, excellent work!
M1cky said:
Does anyone have Magisk fully working with this? I still get ctsprofile:false
Aside from this, excellent work!
Click to expand...
Click to collapse
I do. Try installing the latest beta of Magisk and then, if that didn't solve it, try setting a new Build fingerprint with a tool like MagiskHide Props Config (PS. Just to be sure, set the Google Pixel 2 XL one since that's the only 8.1.0 build fingerprint provided by that tool).
ThatGuy94 said:
From what I can tell, TWRP cannot format the data partition properly which is what causes LOS to appear as encrypted and won't finish booting. I was able to successfully able to get it to boot by flashing the stock boot.img and booting to stock recovery and factory reset that way. After doing that, flash your ROM of choice and Magisk and it should be usable.
Click to expand...
Click to collapse
Could you please tell me how you flash Magisk? After I flash a ROM I'm not able to boot into TWRP to flash Magisk
Happy to see people making use of Treble on Razer Phone this quickly.
Good job! @linuxct
Have no idea where I went wrong but after I had RR up and running I rebooted and It went into download mode.
RUNNERX said:
Have no idea where I went wrong but after I had RR up and running I rebooted and It went into download mode.
Click to expand...
Click to collapse
Yes, it happens sometimes. Let me explain this briefly:
1. This bootloader seems to forget what the active partition was when it was told to reboot the device instead of turning itself off, and I don't know why yet. It happens 1/5 times I press on "Reboot", more or less.
2. You need to re-set the active partition to the one you were using, in my case A, so with a cable and my pc I run
Code:
fastboot set_active a && fastboot reboot
Tired of typing, I made myself a script named razer in my /usr/bin
Code:
#!/bin/zsh
fastboot set_active a && fastboot reboot
So, be careful when rebooting the device if you don't have a close-by PC with fastboot to make it work again, instead, fully turn it off and turn it back on.
el4nimal said:
Could you please tell me how you flash Magisk? After I flash a ROM I'm not able to boot into TWRP to flash Magisk
Click to expand...
Click to collapse
Just fire up a terminal with ADB and type in
Code:
adb reboot recovery
It should be more than enough, no need for root privileges or anything.
linuxct said:
Just fire up a terminal with ADB and type in
Code:
adb reboot recovery
It should be more than enough, no need for root privileges or anything.
Click to expand...
Click to collapse
I'm trying to boot into LineageOS 15.1 but it keeps saying "Decryption Unsuccessful". I followed your guide step by step, and I also tried the pre-built image you provided.
I started over from Oreo DP1 image many times and I've been getting the same error over and over again.
Then, I noticed that @ThatGuy94 mentioned he was able to get it to boot, by flashing stock boot.img and factory reset it that way, and then install the ROM and Magisk.
But I can't figure out how to install Magisk without installing TWRP, is there any fastboot command to install Magisk from the command line?
Resurrection Remix Intensifies
el4nimal said:
I'm trying to boot into LineageOS 15.1 but it keeps saying "Decryption Unsuccessful". I followed your guide step by step, and I also tried the pre-built image you provided.
I started over from Oreo DP1 image many times and I've been getting the same error over and over again.
Then, I noticed that @ThatGuy94 mentioned he was able to get it to boot, by flashing stock boot.img and factory reset it that way, and then install the ROM and Magisk.
But I can't figure out how to install Magisk without installing TWRP, is there any fastboot command to install Magisk from the command line?
Click to expand...
Click to collapse
Unless you have overwritten it, boot to download mode and use fastboot to switch to the other slot which will allow you to boot into TWRP and install Magisk. If you have overwritten TWRP, flash it on the other slot (for example if you have LOS installed in A, flash TWRP into B).
linuxct said:
So, be careful when rebooting the device if you don't have a close-by PC with fastboot to make it work again, instead, fully turn it off and turn it back on.
Click to expand...
Click to collapse
It has happened after a power off also, would putting the same rom in a&b slot stop it? system_other is not bootable so the phone enters download mode? I don't understand the working of the a/b system.
And THANK YOU so much for working on this, so nice to be back on custom roms!
[Update in 1st September 2018] Magisk v17 stable has been released, so the August security update: a new method, more OTA-compliant, is written.
Hi all, this section is quite gaunt, so I'll post my experience on unlocking and rooting my brand new Mi A2 Lite.
I'm not responsible if you make some mistake and accidentally transform your phone in a stone (but it's almost impossible)... <3
How to root
0. You need "debug usb" and "oem unlock" enabled under "developer options" on phone's settings.
1. First, if you don't have already done it, unlock phone's bootloader:
Code:
adb reboot bootloader
fastboot oem unlock
ATTENTION: THIS WILL WIPE YOUR DEVICE, ALL USER DATA WILL BE LOST! And no, when you'll have finish this guide, you can't lock it again (each lock-unlock operation will wipe the device)
2. Download ROM system image from official site. Pay attention to download the corresponding version of your actual OS (look in system settings your current build number).
3. Extract "boot.img" from the just downloaded archive and put somewhere in your device (e.g. in a microSD, just remember where you put it).
4. Download and install Magisk Manager apk.
5. Open Magisk, choosing "yes" when it asks to install Magisk-v*.zip, then choose "patch boot image" and select "boot.img" copied in step 3.
6. At the end of patching process, Magisk will tell you where "patched_boot.img" is been stored, keep a note on it and close.
Now's the updated part, that will make possible to apply OTAs:
7. Copy "patched_boot.img" on your computer, then run this on a terminal:
Code:
adb reboot bootloader
fastboot boot patched_boot.img
fastboot reboot
This will temporarily give you root privileges (until next reboot).
8. Magisk Manager can now make the root permanent: open it and tap "Install", then "direct install (recommended)". This way (instead of flashing directly patched_boot.img) Magisk Manager can remove and reinstall root privileges directly.
9. Just to be sure that your phone doesn't install updates without your acknowledgement, go to Developer Options and disable "Automatic system updates".
Ta-dà! Now you should have Magisk permanently installed (you can check it re-opening Magisk Manager).
-------------------------------------------------------
Time to update? Here's how
If you've followed what is written above, applying an OTA should be quite easy now.
a. Go to Magisk Manager → Uninstall → Restore Images. Do not reboot now or you will have Magisk uninstalled!
b. Now go to Settings → System → System Update and apply OTA. If it fails you've some tweak on system partition that you've forgot to remove, so try to figure it out and retry. Wait for the installation to complete. DO NOT RESTART NOW.
c. Open Magisk Manager again and press Install → Install to Inactive Slot.
d. Reboot and enjoy
-------------------------------------------------------
Troubleshooting
- If your phone seems bootlooping, try to switch it off and on again (sometimes it doesn't start on first boot). If it keeps doing that, donnoh, reflash original "boot.img" and start again!
- For someone seems that Magisk 16 doesn't work well, but since the stable branch has reached 17.0, just use it!
- If you already have rooted your phone in different ways that this one explained here (and you don't have "uninstall" option on Magisk Manager), I suppose that the simpliest way to follow this guide is to reflash factory boot.img and start from the beginning of this post again, but if you figure out alternative ways, post them here!
-------------------------------------------------------
References
https://forum.xda-developers.com/mi-a1/how-to/mi-a1-monthly-updates-t3750419
https://forum.xda-developers.com/showpost.php?p=77448469&postcount=49
https://forum.xda-developers.com/mi-a1/how-to/root-mi-a1-oreo-8-0-disabling-ota-magisk-t3728654
https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
Thanks to BubuXP for the efforts that he puts in this thread, helping anyone who's got problem following this guide.
Have a nice day!
If you posted this a couple of hours early, I'd save a couple hours of my life doing other things instead of discovering by myself what you just wrote :laugh:
However, add to your guide to change the update channel in Magisk Manager to "beta" instead of stable, because only starting from 16.7 (the actual beta version) has support to A/B partitions scheme (the one used by our device). When the new stable version of Magisk will be released, that could be removed.
Add also that installing modules isn't possible out of the box, because both Magisk Manager and Android stock lack the unzip binary (I'm searching for a solution).
few minutes has past and Im looking here at endless boot animation:/
so I do fastboot factory flash, did it again and now no issues at all,thanks!
BubuXP said:
If you posted this a couple of hours early, I'd save a couple hours of my life doing other things instead of discovering by myself what you just wrote :laugh:
However, add to your guide to change the update channel in Magisk Manager to "beta" instead of stable, because only starting from 16.7 (the actual beta version) has support to A/B partitions scheme (the one used by our device). When the new stable version of Magisk will be released, that could be removed.
Add also that installing modules isn't possible out of the box, because both Magisk Manager and Android stock lack the unzip binary (I'm searching for a solution).
Click to expand...
Click to collapse
That's weird, (saw also your message in the other thread)I didn't had all these issues and I'm using magisk 16.0 (no beta). I could also install modules out of the box without having to do anything special
Edit : added quote
I had another ROM installed,It was more "light" than this one posted here. Many google app was added after I did flash. My phone should be global version and I buy it from local store. It was ODLMIFF also.
edit:seems that screen cast is not working
kidoucorp said:
That's weird, (saw also your message in the other thread)I didn't had all these issues and I'm using magisk 16.0 (no beta). I could also install modules out of the box without having to do anything special
Edit : added quote
Click to expand...
Click to collapse
That's weird indeed...
I've re-downloaded the fastboot image and I'm flashing it right now, then I will retry patching boot.img
I found an updated 16.7 version in the Pixel 2 XL forum that fixes some weird behaviors other users had., I will try it too.
EDIT 1: I usually do all my operations under Debian Linux. This time I used the Mi Flash tool under Windows, and I patched the boot.img with 16.0.
I don't know what of the two changes fixed the problem, but now it's working without problems (but the first time I tried directly with your boot.img patched with 16.0 and it was not working ).
FYI, sha512 of the old and new fastboot image downloaded were the same, so it was not a problem of defective download.
BubuXP said:
That's weird indeed...
I've re-downloaded the fastboot image and I'm flashing it right now, then I will retry patching boot.img
I found an updated 16.7 version in the Pixel 2 forum that fixes some weird behaviors other users had., I will try it too.
Click to expand...
Click to collapse
Im using 16.0. Also phone sometimes wont boot, stuck at screen with unlocked text or stuck in boot animation. I guess xiaomi is very wrong choice for somebody who want customize his android:laugh:
mik.y said:
Im using 16.0. Also phone sometimes wont boot, stuck at screen with unlocked text or stuck in boot animation. I guess xiaomi is very wrong choice for somebody who want customize his android:laugh:
Click to expand...
Click to collapse
I edited my previous post, just to inform you.
I think those problems arise because the phone is too young, many things have to be fixed by Xiaomi. And also things will get better when the new stable Magisk that will support new Android features will be released.
1st time it bootlooped, I got the screen "Android can't boot, retry or factory reset?". I pressed retry and it booted.
The only bug I'm facing is reboot from the power menu is not working, it never boots (bootloop). Shutdown then start the phone work perfectly. I can live with that
I'm not sure, but apparently I found the culprit.
The only way to make Magisk work flawlessly is following the guide in the first post.
I mean, if I use the patched_boot.img made in another phone it causes always some problems, as if Magisk in the process of patching the boot.img put a signature of the actual phone inside the img and it will work fine only in the same phone that created the patched boot.img
Not only this, but if I flash the phone with the stock ROM via fastboot, and then use the patched_boot.img created previously on the same phone before flashing, it won't work neither (something in the "signature" changes, like it is a new phone).
kidoucorp said:
1st time it bootlooped, I got the screen "Android can't boot, retry or factory reset?". I pressed retry and it booted.
The only bug I'm facing is reboot from the power menu is not working, it never boots (bootloop). Shutdown then start the phone work perfectly. I can live with that
Click to expand...
Click to collapse
Probably using the beta channel with 16.7 could improve your situation. I'm using 16.7 right now, following the OP guide, and it is working great (until now).
BubuXP said:
Probably using the beta channel with 16.7 could improve your situation. I'm using 16.7 right now, following the OP guide, and it is working great (until now).
Click to expand...
Click to collapse
I can confirm that I'm using Magisk stable 16.0, and everything works fine, but I suppose it's because I've flashed booth partition A and B. I've updated the first post anyway, thanks!
kidoucorp said:
1st time it bootlooped, I got the screen "Android can't boot, retry or factory reset?". I pressed retry and it booted.
The only bug I'm facing is reboot from the power menu is not working, it never boots (bootloop). Shutdown then start the phone work perfectly. I can live with that
Click to expand...
Click to collapse
My old Mi A1 does the same too, it's a bit strange but once you know it, you can handle it
It works !!
Device: Mi A2 Lite (4/64GB) global version.
(cpu-z reports: Snapdragon 626 @2.02 GHz)
Using Magisk 16.7 and boot.img from global rom "V9.6.4.0.ODLMIFF (Android O) " (oem rom from xiaomi).
Only difference is the method which I tried and fail initially, was I cmd "adb reboot bootloader" from the PC which doesn't work for me.
It says failed to write boot_a and boot_b.
I had to do the hardware reset to get into fastboot. (pressing vol-down and power button simultaneously).
Once I am in fastboot mode, from the PC cmd execute the following sequence
1. fastboot flash boot_a patched_boot.img
2. fastboot flash boot_b patched_boot.img
3. fastboot reboot
And voila!, it works beautifully. Thanks for all the contributors of this thread
It runs all apps including apps that cannot be rooted. (have to do the "hide" magisk)
So far so good, no issue to be found.
Have a great day people.
eddiechanks said:
Device: Mi A2 Lite (4/64GB) global version.
(cpu-z reports: Snapdragon 626 @2.02 GHz)
Using Magisk 16.7 and boot.img from global rom "V9.6.4.0.ODLMIFF (Android O) " (oem rom from xiaomi).
Only difference is the method which I tried and fail initially, was I cmd "adb reboot bootloader" from the PC which doesn't work for me.
It says failed to write boot_a and boot_b.
I had to do the hardware reset to get into fastboot. (pressing vol-down and power button simultaneously).
Once I am in fastboot mode, from the PC cmd execute the following sequence
1. fastboot flash boot_a patched_boot.img
2. fastboot flash boot_b patched_boot.img
3. fastboot reboot
And voila!, it works beautifully. Thanks for all the contributors of this thread
It runs all apps including apps that cannot be rooted. (have to do the "hide" magisk)
So far so good, no issue to be found.
Have a great day people.
Click to expand...
Click to collapse
Same for me. Just extract the boot.img from the official Xiaomi rom (downloadable from their website), patch that through Magisk manager, and flash the patched .img to boot_a and boot_b using fastboot. Works flawlessly.
Only thing I haven't been able to do is remove the forced encryption. I was able to change the encryption password however using vdc cryptfs.
worked flawlessly, did have to re-install magisk manager after flashing the patched boot images, but all was fine after a quick apk reinstall.
Hi guys,
Sorry for those newbie questions (I come from an old Nexus 5 with Lineage, and I am far from magisk) :
How is going the update ? will it be OTA ? Will it be manual (in this case where do I find the file) ? Do we need to re-root after OS update ?
Thanks in advance !
arnofor said:
Hi guys,
Sorry for those newbie questions (I come from an old Nexus 5 with Lineage, and I am far from magisk) :
How is going the update ? will it be OTA ? Will it be manual (in this case where do I find the file) ? Do we need to re-root after OS update ?
Thanks in advance !
Click to expand...
Click to collapse
The OTA update should be automatic, but I'm not sure 100%
However, after every system update, you have to do the boot patching procedure again but using the boot.img from the new version.
Can I do the unlock part and the rest in a couple of weeks? Without data loss?
ncar123 said:
Can I do the unlock part and the rest in a couple of weeks? Without data loss?
Click to expand...
Click to collapse
You can unlock whenever you want, but every time the bootloader is locked or unlocked, the phone resets its data (but I'm not 100% sure, maybe it's only locking or only unlocking).
But why unlocking now and wait 2 weeks? Couldn't you unlock the phone directly in 2 weeks when you are ready?
BubuXP said:
You can unlock whenever you want, but every time the bootloader is locked or unlocked, the phone resets its data (but I'm not 100% sure, maybe it's only locking or only unlocking).
But why unlocking now and wait 2 weeks? Couldn't you unlock the phone directly in 2 weeks when you are ready?
Click to expand...
Click to collapse
I don't want to setup my phone with my data twice...
ncar123 said:
I don't want to setup my phone with my data twice...
Click to expand...
Click to collapse
So it's ok. Unlock now while you don't have any data in the phone and whenever you want, you can install Magisk later.
[GUIDE] NOOB-Friendly STEP-BY-STEP Instructions to Install Monthly OTA updates on Rooted Essential PH-1
Introduction: I know there are many threads already posted that answer how to install OTA on rooted devices but unfortunately they get lost in massive threads that are often not NOOB friendly. I do not claim to be an expert but I have spent a long time reading threads and found the method I will detail below the easiest for me to follow on a monthly basis. I will do my best to give credit where credit is due to the original authors but my apologies in advance if I miss anything.
Just to start the prerequisites I have are a Windows 10 PC, Essential PH-1, with Stock OS and stock unlocked Bootloader. I have tried using TWRP in the past but I found this method simpler. I don't know whether my instructions will work for you or not if you already have TWRP installed but I can let one of the experts respond and I will be happy to update the guide based on feedback.
Part 1 - Downloads
Start by downloading the following items and storing them locally on your PC if you don't have them already
Download the latest OTA Monthly build from here: https://www.essential.com/developer/current-builds Note: Just check off that you are looking for "Current Builds" and click "Submit Form" and then click "Download (OTA)" link beneath the newest release you want.
Download the newest stock boot image here from bmg1001's google drive Credit:bmg1001
(FIRST TIME ONLY) Download and install the Windows driver (if you don't already have on your computer) from here: https://storage.googleapis.com/essential-static/Essential-PH1-WindowsDrivers.exe
(FIRST TIME ONLY) Download ADB tool (if you don't have already on your computer) from here: https://developer.android.com/studio/releases/platform-tools.html This link is directly from Essentials site here in their "Before Sideloading" section it is the link entitled "You'll need the latest ADB tool"
To continue you must have developer options USB Debugging enabled which I presume was already done previously if your phone is rooted but if not you must do so before proceeding.
To Enable Developer Options: Settings App> System> About Phone> Scroll Down to Bottom and tap 7 times on the "Build Number"
To Enable USB Debugging: Settings App> Developer Options> USB Debugging (Set to Enabled)
Part 2 - Sideload the OTA Update
DISCLAIMER: This method if done properly should not wipe any of your data, however I take no responsibility and it is always advisable to back up your data before proceeding with any updates if you wish. I will be honest that I have now done this several times and never had any issues.
Unzip the ADB tool (link above in downloads section is for "platform-tools") and save it to a folder easily accesible on your computer (for this demonstration I will use "C:\platform-tools")
Copy the OTA update file to your ADB folder i.e. "C:\platform-tools" and rename it "OTAupdate.zip" (it is not necessary to rename it, just makes this simpler for the guide)
Verify the checksum of the image. I use hashtab which allows you to right click on any file and click properties and see the hashes as a tab in the properties menu. The SHA-256 is listed right under the OTA download link just copy and paste it in to the hashtab to verify
Remove your PIN / Password before sideloading by going to Settings> Security & Location> Screen Lock> Set it to None (this probably isn't necessary I just do it as a precaution)
Plug Essential Phone into computer and make sure that it says USB Debugging Enabled
Open the folder "C:\platform-tools" in Windows File Explorer and hold shift and right click in the window and you select the option "Open Powershell window here" from the context menu (works in Windows 10 can't speak for earlier Windows versions). If you don't see it the first time Shift+right click on a different part of the empty white window and you should see it appear.
Verify your device is properly connected by typing
Code:
adb devices
and you should see your device listed
Type
Code:
adb reboot recovery
Note:If you're unable to use ADB to reboot into recovery, you can use the key combination for your device. While device is off to boot into Recovery mode, press and hold Volume-Up button while pushing Power button to boot.
Your device is now in Recovery mode. An Android logo with red exclamation mark should appear on screen. Hold the Power button, then press the Volume-Up button one time. When the menu appears, select Apply update from ADB.
Run the following command:
Code:
adb devices
Then check that your device shows up with “sideload” next to its name
Run the following command:
Code:
adb sideload OTAupdate.zip
where OTAupdate.zip is the name of the file you downloaded and verified
Once the update finishes, select Reboot system now to reboot your phone
At this point you should have a stock updated essential device but without root. The remainder of this guide will use Magisk to restore your device to root.
Part 3 - Re-root your Device with Magisk
Copy newest boot image from here that you downloaded earlier to a folder directly on your phone. I personally put it in my "Download" folder on my phone so I can find it easily
Open Magisk Manager and click Install>Install>Patch Boot Image
Select the boot image from step 1 and then let Magisk proceed in creating a patched image file
Copy the file "magisk_patched.img" file that Magisk just created from your device back to the computer and put it in the ADB folder "C:\platform-tools"
Plug in phone and open powershell same as before (shift+ right click> Open Powershell window here)
Type
Code:
adb reboot bootloader
to reboot your phone into fastboot
Confirm your phone is in fastboot by typing
Code:
fastboot devices
Then check that your device shows up with “fastboot” next to its name
Execute the command
Code:
fastboot flash boot magisk_patched.img
Restart your phone and you are done! Don't forget to put your phone PIN/Password back if you disabled security in the earlier step.
You should now have a successfully updated phone with full ROOT access with Magisk. I know that this guide seems like a lot of steps but it really goes very quickly, I just tried to be detailed and NOOB-Friendly.
Hope this helps all of my fellow XDA members!! Please share any and all feedback. Thanks!
Full credit goes to this thread for helping me with everything: [GUIDE] Rooting your Essential PH-1
The way I do *updates* is different (not the initial TWRP/ root).
I use the same Essential developer link as in part 1-1. I also have a copy of twrp-installer-mata-3.2.3-0 zip file on my device.
Boot to TWRP, and do a complete nandroid.
Then install the OTA file just like it's any other zip and when it's done, install the twrp-installer-mata-3.2.3-0 zip file. You can simply put them both into the flash queue before starting the flash.
This TWRP installer will install to both slots ensuring that the inactive slot has it installed. Wipe dalvik and then reboot to system which will be in the opposite slot from the one you started at.
The OTA will always flash to the inactive slot and the bootloader will switch to the slot the OTA was flashed to.
The initial boot takes a few minutes. Once I verify the ROM boots correctly, then I reboot to TWRP and flash Magisk. This ensures that Magisk get installed to the same slot that is now active.
I agree it's safer to remove screen pin, so far I have gotten away with never remembering to do that [emoji16]
If the flash fails, the bootloader should just switch you back to the original slot. I would expect that to boot fine, with one exception... The bootloader was changed between 8.1.1 and 9.0. So if you are going between major versions, the original slot will bootloop after the update.
One more note, a pet peeve of mine; when referencing a post that is older, make sure that you review the forums for changes. TWRP might have a required newer release, the methods that once worked may no longer work. If you are not sure or comfortable recovering, then don't be an early adopter. [emoji6]
"find somebody that you think is undeserving of your compassion and give it to them" - Christian Picciolini
ktmom said:
The way I do *updates* is different (not the initial TWRP/ root).
I use the same Essential developer link as in part 1-1. I also have a copy of twrp-installer-mata-3.2.3-0 zip file on my device.
Boot to TWRP, and do a complete nandroid.
Then install the OTA file just like it's any other zip and when it's done, install the twrp-installer-mata-3.2.3-0 zip file. You can simply put them both into the flash queue before starting the flash.
This TWRP installer will install to both slots ensuring that the inactive slot has it installed. Wipe dalvik and then reboot to system which will be in the opposite slot from the one you started at.
The OTA will always flash to the inactive slot and the bootloader will switch to the slot the OTA was flashed to.
The initial boot takes a few minutes. Once I verify the ROM boots correctly, then I reboot to TWRP and flash Magisk. This ensures that Magisk get installed to the same slot that is now active.
I agree it's safer to remove screen pin, so far I have gotten away with never remembering to do that [emoji16]
If the flash fails, the bootloader should just switch you back to the original slot. I would expect that to boot fine, with one exception... The bootloader was changed between 8.1.1 and 9.0. So if you are going between major versions, the original slot will bootloop after the update.
One more note, a pet peeve of mine; when referencing a post that is older, make sure that you review the forums for changes. TWRP might have a required newer release, the methods that once worked may no longer work. If you are not sure or comfortable recovering, then don't be an early adopter. [emoji6]
"find somebody that you think is undeserving of your compassion and give it to them" - Christian Picciolini
Click to expand...
Click to collapse
you know i just finished writing my own guide to do it after i had trouble with the sticky posts. for me, magisk couldnt find the stock boot so i had to pretty much redo it. i did most things with back-to-stock and fastboot. but now i really wanna try your method through twrp. i been using the patched_twrp_magisk_stock.img images which have twrp and magisk in the same image. using your method, in twrp, could i flash the ota, the patched_twrp_magisk_stock.img, switch slots in twrp, flash patched_twrp_magisk_stock.img again, then switch back to the original slot and reboot system? thanks!
this thread has the patched_twrp_magisk_stock.img images
https://forum.xda-developers.com/essential-phone/development/stock-7-1-1-nmj20d-t3701681
@andypiznti
There's no need to manually switch slots. And no reason to flash the TWRP *installer* file twice. The first time it runs, it patches both slots.
IMHO, trying to control slots is what gets people into trouble.
I do pay attention to what slot I'm on before I start though. In TWRP, if you go to the reboot menu, it will tell you. But the way I flash, I stay on the slot I started with. The OTA will always flash to the opposite slot - which should be the inactive slot. Flashing the TWRP *installer* file just once, patches both slots.
Just wipe dalvik (and cache but there is no cache partition so it will error - just ignore the error) then reboot to system like we've done after custom ROMs for years.
The next boot, the bootloader knows to switch to the slot with the newest OS.
After a successful boot, when you return to TWRP, you'll see the slot is the opposite one from when you started. But you didn't need to do any slot switching.
Don't force things. Let the slots take care of themselves.
I also think, there is less likely to be trouble with Magisk and the boot.img, if you boot fully after an update, before returning to recovery to flash Magisk. Remember that both TWRP and Magisk are making changes to the boot.img.
Final thought, unless I seriously misunderstand Magisk, if you rooted using an all-in-one boot.img you won't have a back up of the "stock" boot.img to restore, making the Magisk uninstaller useless. The backup made when installing Magisk is stored on the data partition, not the boot partition. This is why the instructions in BTS tell you to flash the stock boot.img and provide a copy of it.
"find somebody that you think is undeserving of your compassion and give it to them" - Christian Picciolini
The beauty of my method in the OP is you don't need to worry at all about the correct "slots" like you have to with TWRP...
ktmom said:
@andypiznti
I also think, there is less likely to be trouble with Magisk and the boot.img, if you boot fully after an update, before returning to recovery to flash Magisk. Remember that both TWRP and Magisk are making changes to the boot.img.
Final thought, unless I seriously misunderstand Magisk, if you rooted using an all-in-one boot.img you won't have a back up of the "stock" boot.img to restore, making the Magisk uninstaller useless. The backup made when installing Magisk is stored on the data partition, not the boot partition. This is why the instructions in BTS tell you to flash the stock boot.img and provide a copy of it.
"find somebody that you think is undeserving of your compassion and give it to them" - Christian Picciolini
Click to expand...
Click to collapse
ok that answers a lot. thanks! the guide i made for myself had me flashing the stock image with bts. i was curious about the full boot after an update, i was thinking the same thing in that it might cause problems with magisk, but i also thought twrp would cause problems too. the reason i mentioned switching slots and flashing is the all-in-one img only flashes to one slot at a time, i believe.
heres my guide for reference, its kinda long. but these were the exact steps i followed and was successful. had to flash the img twice, kept rebooting into recovery if i didnt.
Applying OTA for Essential Phone when Magisk doesn't have stock boot
Boot to recovery with Magisk
Back up at least system and boot
Boot to bootloader with TWRP
Extract back to stock (BTS) for CURRENT INSTALLED VERSION, not the update BTS version
Once in bootloader, connect phone->old phone plug, SSD plug
Run flashallnowipe.bat, once bootloader reboots, select Start, unplug phone
Uninstall Magisk like a regular app
Do OTA->settings->advanced->system update
after reboot->reboot while holding volume down until in download/fastboot mode
***REMEMBER!! Flash on the opposite slot of the current slot
***so if im on slot a, flash slot b.
make sure to extract Essential_ADB_and_FASTBOOT.zip in BTS folder then->cmd-here.exe
fastboot getvar current-slot
***
fastboot flash boot_a dec_patched_twrp_magisk_stock.img
fastboot flash boot_b dec_patched_twrp_magisk_stock.img
***Switch to other slot
fastboot --set-active=a
fastboot --set-active=b
***Just to double check, REMEMBER!! Flash on the opposite slot of the current slot
fastboot getvar current-slot
***
fastboot flash boot_a dec_patched_twrp_magisk_stock.img
fastboot flash boot_b dec_patched_twrp_magisk_stock.img
***Switch back to orig slot
fastboot --set-active=a
fastboot --set-active=b
On the phone fastboot menu, select Start, unplug phone
Manager asks if you wanna install it, no, it downloads the wrong one, maybe works now?
Install Magisk Manager->https://github.com/ianmacd/MagiskBuilds
IT HAS TO BE THIS APK, Download any apk version from above github, install
when you open Manager, then download the newest apk, dont update image
Manager and Image update daily, ignore till next month OTA
Click to expand...
Click to collapse
hssxda said:
The beauty of my method in the OP is you don't need to worry at all about the correct "slots" like you have to with TWRP...
Click to expand...
Click to collapse
I don't know what more I could do to make the point it's not necessary to worry about slots in TWRP.
@andypiznti. The all-in-one is Fastboot flashed to either slot one at a time. All of this makes life harder than it needs to be.
My post was suggesting an alternative. Use the OTA, no Fastboot, no PC just have the TWRP installer file I linked so you don't lose TWRP.
"find somebody that you think is undeserving of your compassion and give it to them" - Christian Picciolini
ktmom said:
I don't know what more I could do to make the point it's not necessary to work about slots in TWRP.
Click to expand...
Click to collapse
Well, all of your posts describing your method contains the word "slot" multiple times so it is obviously a relevant concern otherwise you wouldn't have mentioned it. My post did not contain the word even once...
I see no need to use TWRP. What advantage does it have?
ktmom said:
I don't know what more I could do to make the point it's not necessary to worry about slots in TWRP.
@andypiznti. The all-in-one is Fastboot flashed to either slot one at a time. All of this makes life harder than it needs to be.
My post was suggesting an alternative. Use the OTA, no Fastboot, no PC just have the TWRP installer file I linked so you don't lose TWRP.
"find somebody that you think is undeserving of your compassion and give it to them" - Christian Picciolini
Click to expand...
Click to collapse
oh yes, definitely doing that next time. thanks!! i found this post thats exactly your method in a little less words.
https://forum.xda-developers.com/es...1-1-nmj20d-t3701681/post78194778#post78194778
Jeebus...
We didn't like the other 15 goddamn threads with the same topic...
XDA is cancer
what works for me at the time to flash the patched image was
fastboot flash boot_a patched_boot.img
fastboot flash boot_b patched_boot.img
note: i am on pie
thanks for the guide.
Really helped lots, thank you.
January update is out, who might like to patch boot.img with TWRP and Magisk?
kma_29 said:
January update is out, who might like to patch boot.img with TWRP and Magisk?
Click to expand...
Click to collapse
Go to the stock room thread
"find somebody that you think is undeserving of your compassion and give it to them" - Christian Picciolini
OP, if you want to avoid having to sideload the whole OTA, you can have it done directly by your phone by flashing the stock boot image for the current version that you are one and then updating from the settings (or notification). Then just continue with flashing the rooted boot image for the new update. I feel like that is safer than both TWRP and sideloading the full OTA (in reference to keeping data safe).
https://forum.xda-developers.com/showpost.php?p=76828139&postcount=1264
morphius88 said:
OP, if you want to avoid having to sideload the whole OTA, you can have it done directly by your phone by flashing the stock boot image for the current version that you are one and then updating from the settings (or notification). Then just continue with flashing the rooted boot image for the new update. I feel like that is safer than both TWRP and sideloading the full OTA (in reference to keeping data safe).
https://forum.xda-developers.com/showpost.php?p=76828139&postcount=1264
Click to expand...
Click to collapse
Thanks
@bmg1001 are you still providing the stock boot images on your google drive. I am looking for the Feb stock boot image or can someone tell me how to get it. I tried extracting from the Feb OTA but did not see it listed in that zip
jionny said:
@bmg1001 are you still providing the stock boot images on your google drive. I am looking for the Feb stock boot image or can someone tell me how to get it. I tried extracting from the Feb OTA but did not see it listed in that zip
Click to expand...
Click to collapse
Yep, I have it in the same Google Drive folder where the other month's images are posted.
bmg1001 said:
Yep, I have it in the same Google Drive folder where the other month's images are posted.
Click to expand...
Click to collapse
Sorry chalk that up to me not paying attention. I was looking for it after Jan but its actually the first one listed. Thanks!
bmg1001 said:
Yep, I have it in the same Google Drive folder where the other month's images are posted.
Click to expand...
Click to collapse
Hi one more thing, this is my third time updating and rooting via this method. The last two times worked flawlessly however this time I did update the OTA but when I try to reroot and go to adb devices I see my phone listed then when I reboot recovery it does however when I try fastboot devices my phone does not show and nothing happens, any help will be appreciated
EDIT: I attached a zip with AIDA64's reports for this phone. One report has Magisk hidden from AIDA64, the other doesn't.
This mostly a copy of _cab13_'s Rooting the UMI F2 post as the same instructions for rooting that phone are how I rooted the S5 Pro. So please give _cab13_ thanks here if this helped you root your phone. I'll take a thanks for removing the orange state warning if I helped you with that
Please be patient when posting questions, I will get back to you as quickly as I can. I just have many responsibilities which take up a great deal of my time.
Rooting the S5 Pro
Disclaimers
This is important, please read thoughtfully.
whatever you do, NEVER EVER use SP Flash Tool in "Format All+Download" mode. This will wipe your IMEI['s]s and some other bad stuff will happen like loss of fingerprint sensor. This cannot be reversed by us.
Once bootloader is unlocked, warranty is considered void. By following this guide, you consent to that happening. Safety net CTS will not pass anymore unless you flash Magisk which hides the unlocked bootloader.
Never re-lock your bootloader while running anything unofficial as the phone will not boot until you unlock again.
And, once again, a lot of bad things can happen like boot loops, if that happens to you, don't freak out! Simply re-flash the stock ROM, redoing the rooting process from the start. It might be time consuming, but that's your safest bet!
More important even, have fun rooting, it's before all a hobby!
Various Resources
>>> Latest official stock ROM <<<
[Non European] UMIDIGI_S5Pro_20210107.V3.04
[European] UMIDIGI_S5Pro.E_20201130.V3.04
Minimal ADB and Fastboot by shimp208
> Magisk (and Manager) by topjohnwu <
Mediatek SP Flash Tool
UMIDIGI Community Forum S5 Pro Thread
Unlocking Bootloader
ATTENTION!! After unlocking the bootloader, all user data in the phone's memory will be lost, so do not forget to throw all the most important things on your computer or flash drive!
1) Activate "Developer options" through Settings > About Phone > Tap Build Number multiple times.
2) Open "Developer options" in Settings > System > Tap Advanced.
Enable "OEM Unlocking" and enter your password to confirm. Enable "USB Debugging" as well.
3) On Windows, download and install Minimal ADB and Fastboot by shimp208
On Linux, use your package manager to install android-tools-adb and android-tools-fastboot
4) Open command prompt (Win + R > type cmd) or a terminal on linux.
5) Plug your phone, accept the prompt about adb and the PC signature.
6) Type adb reboot bootloader to reboot in fastboot mode. Unplug your cable from your phone
and replug it after fastboot is printed at the bottom of the screen.
THESE NEXT TWO STEPS WILL COMPLETELY WIPE YOUR DATA
7) Unlock the bootloader using fastboot flashing unlock and pressing Vol+
8) Unlock the secure partitions using fastboot flashing unlock_critical and pressing Vol+
9) Restart using fastboot reboot
You will now always see "Orange State" at boot; this is completely fine and will only delay your boot by 5 seconds.
Rooting using Magisk patched boot.img
This is "experimental" and is probably overkill, but everyone managed to install Magisk with it.
1) Clean install UMIDIGI_S5Pro_20200702.V3.02 (or the European one) with SPFT by selecting the scatter file, pressing download an rebooting the phone
(Make sure it is in "Download Mode" and not "Format + Download")
2) Patch boot.img by copying it to your device, using Magisk Manager to patch it, and get back the magisk_patched.img in the Download folder back to your PC.
3) Start ADB while booted; run adb reboot bootloader. Alternative is to reboot to recovery and selecting "reboot to bootloader"
4) unlock if not already done with fastboot flashing unlock followed by fastboot flashing unlock_critical
5) In the following code, the vbmeta.img and the recovery.img are the stock files from the ROM you downloaded and extracted.
Code:
fastboot erase boot
fastboot --disable-verity --disable-verification flash boot magisk_patched.img
fastboot --disable-verity --disable-verification flash recovery recovery.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot reboot
When rebooting, install Magisk Manager. It will prompt to finalize the installation, you can do so.
Congratulations ! You are now a proud Magisk user ! All credits goes to @topjohnwu he's the real MVP here.
Returning to stock / Resolving issues
The best way to resolve any issue is to return to stock. Here is the method.
1) Download latest stock ROM on UMIDIGI's forums
2) Download SP Flash Tool if you don't have it yet (Windows only)
3) Extract stock ROM in SP Flash Tool directory. Refer to Flash Tool guide if needed.
4) Open SP Flash Tool, Download Tab, "Choose" in Scatter-loading file, select the scatter file in the stock ROM directory.
5) If you want to keep your data, untick "userdata" partition. MAKE SURE FORMAT IS NOT SELECTED!
6) Press Download and connect your device via USB. Reboot the phone or turn it off and everything will be flashed.
7) If you want a full stock experience, I recommend relocking the bootloader so that SafetyNet will pass. Get into fastboot mode by using adb reboot bootloader and use fastboot flashing lock_critical followed by fastboot flashing lock. This will wipe your data once more.
You should be good to go.
ONE LAST THING
Get rid of your orange state warning.
Download the attached zip file and extract.
Put your phone into fastboot and:
Code:
fastboot erase lk
fastboot erase lk2
fastboot flash lk lk_patched.img
fastboot flash lk2 lk_patched.img
fastboot reboot
No more orange state warning! Reflash the stock lk before unrooting, though.
ATTACHED LK FILE IS FOR UMIDIGI S5 Pro ONLY.
Thank you for re-posting this as an option to root the S5. I did get stuck on flashing the recovery. I have tried a few times and every time it just flashes orange , restarts and loads normally. I have verified root.
i have used the recovery found here
https://forum.xda-developers.com/android/general/guide-rooting-umidigi-s5-pro-magisk-t4151183
I have no success installing TWRP. Do you know if twrp has a recovery that will work?
Hey guys it's me again !
Got some good news : I bought a S5 Pro as well
And I ABSOLUTELY LOVE IT !
I might get into rooting it soon, idk.
Thanks for the shout-out @zerosava
hermeez said:
Thank you for re-posting this as an option to root the S5. I did get stuck on flashing the recovery. I have tried a few times and every time it just flashes orange , restarts and loads normally. I have verified root.
i have used the recovery found here
https://forum.xda-developers.com/android/general/guide-rooting-umidigi-s5-pro-magisk-t4151183
I have no success installing TWRP. Do you know if twrp has a recovery that will work?
Click to expand...
Click to collapse
No luck for me finding a custom recovery (twrp or anything else.)
If you have any exp with them, see if you can make the F2's (found in the F2 root thread) work. It SHOULD only need a minumum of tweaking, just to account for the (afaik) slight soc differences. i'm not gonna hold my breath. there seems to be a void when it comes to enthusiasm for this phone. by my serial no, i have the 4832nd phone manufactured. compared to serials ranging from 22000- 189000 for my other umis (f1play, s3pro, f2, power3)
I think I'll try making TWRP soon for it.
The F2 TWRP would not be usable this easily, it's easier to start fresh.
If anyone wants to try, download the sources for the F2 TWRP on my GitHub, then you need to extract the stock kernel and replace the F2's with the S5pro's
root working thanx
Hi guys ,i lost the imei on my phone and have the" Googlekeystate:fail", how can i fix them, thanks for you help.
QUICKLARA said:
Hi guys ,i lost the imei on my phone and have the" Googlekeystate:fail", how can i fix them, thanks for you help.
Click to expand...
Click to collapse
Sorry, but I made this clear in the original post:
Disclaimers
This is important, please read thoughtfully.
whatever you do, NEVER EVER use SP Flash Tool in "Format All+Download" mode. This will wipe your IMEIs and some other bad stuff will happen like loss of fingerprint sensor. This cannot be reversed by us.
I do not know how to help you. My only suggestion is to post your problem in UMIDIGI's forum here: UMIDIGI Forum
If anyone can help you, that's where to find them.
Please I need your help I reset it wrong with SP Flash Tool and now I get Googlekeystate: fail and it doesn't grab my fingerprint I'm desperate I need a solution please
Ruiz702 said:
Please I need your help I reset it wrong with SP Flash Tool and now I get Googlekeystate: fail and it doesn't grab my fingerprint I'm desperate I need a solution please
Click to expand...
Click to collapse
I am sorry, but you will have to contact UMIDIGI support. Only they can help you as far as I know. I feel for you, I really do. I did this when I was a newbie with my F1 Play.
QUICKLARA said:
Hi guys ,i lost the imei on my phone and have the" Googlekeystate:fail", how can i fix them, thanks for you help.
Click to expand...
Click to collapse
hello, good and bad news.. fix but fingerprints are lost for good
https://community.umidigi.com/forum.php?mod=viewthread&tid=19722&extra=&page=1
Ruiz702 said:
Please I need your help I reset it wrong with SP Flash Tool and now I get Googlekeystate: fail and it doesn't grab my fingerprint I'm desperate I need a solution please
Click to expand...
Click to collapse
hello, good and bad news.. fix but fingerprints are lost for good
https://community.umidigi.com/forum.php?mod=viewthread&tid=19722&extra=&page=1
i followed the instructions but i got stuck after step 4 it would be nice if this had a video walkthrough thanks for the guide though =w= 10/10 would try to root again lol
hello folks,
This message is not about rooting s5 but rather about downgrading. I posted on the umidigi forum but have not received an answer. So the problem is the new OTA update that they pushed out yesterday. After update I lost 4G connectivity and i am unable to restore it. I want to roll back to the previous update. They have the roms available on the forum and I downloaded one but what I am not sure is can I use SP flash tool to just download the older ROM version on top of the new one?
I see lots of manuals on how to update but how do I safely downgrade?
Any help is greatly appreciated.
Sticks
stick2020 said:
hello folks,
This message is not about rooting s5 but rather about downgrading. I posted on the umidigi forum but have not received an answer. So the problem is the new OTA update that they pushed out yesterday. After update I lost 4G connectivity and i am unable to restore it. I want to roll back to the previous update. They have the roms available on the forum and I downloaded one but what I am not sure is can I use SP flash tool to just download the older ROM version on top of the new one?
I see lots of manuals on how to update but how do I safely downgrade?
Any help is greatly appreciated.
Sticks
Click to expand...
Click to collapse
Do a "download only" flash of the "super", " vbmeta_system", and "vbmeta_vendor" partitions only (uncheck all other partitions) from the previous ROM. That should do it.
ZeNNoP said:
i followed the instructions but i got stuck after step 4 it would be nice if this had a video walkthrough thanks for the guide though =w= 10/10 would try to root again lol
Click to expand...
Click to collapse
What precisely stuck you?
There is a new update firmware please make a rooting tutorial on youtube.,
Somebody made a custom TWRP and posted it on here. So if that'll help anyone out and get them to make a tutorial video, that be great. 'Cause I'm reading this over and over again, and I think I can do it, but I'm being very hesitant about it. And it's getting me all frustrated. I had it on "Flash Mode". And when I continued typing it out, it didn't go through and that had me on a raging panic attack. Luckily, it didn't mess up. But now I'm more hesitant. Please make a quick tutorial, doesn't even have to be perfect...
TWRP is at the bottom of this page:
[MT6785]How To Root Umidigi S5 Pro And Install TWRP 3.4.0 Recovery ~ Techswizz
To Root Umidigi S5 Pro, we will be using the Adb Tool Mode with TWRP recovery for Umidigi S5 Pro. It will be wise to read the post very well before flashing the recovery to avoid any Device errors or brick.
www.techswizz.com
Thanks for this guide. I am completely lost with step 7 and 8. What does the Unlock the bootloader using fastboot flashing unlock and pressing Vol+ mean?????? Where do you enter the unlock code and what is it?
bmaz121 said:
Thanks for this guide. I am completely lost with step 7 and 8. What does the Unlock the bootloader using fastboot flashing unlock and pressing Vol+ mean?????? Where do you enter the unlock code and what is it?
Click to expand...
Click to collapse
I am able to get FastBoot Mode on my screen (through step 6). I plug the phone back in per directions & I hear the Windows device connected chime.
I type: fastboot flashing unlock in the same cmd window
and I get "<waiting for any device>" in the cmd window and it hangs.
Every few seconds I hear the Windows device disconnected noise, but no device connect chime. This lasts indefinitely.
I repeated step 7 several times with variations with the Vol+ button: pressing first, holding down while pressing enter in cmd window, pushing afterward, holding down afterward, etc. Same results as described above.
Any help available? Should I not unplug my phone from the PC? The F2 directions did not require that.
thanks!
Rooting the Pixel 6a is just about as easy as any other factory unlocked pixel, but because so many people have had issues with unlocking their bootloaders, I figured I'd post my exact personal steps I took when a Pixel 6a came into my tech shop to be rooted, and I discovered the current bug with Rooting
What You'll Need:
- June 2022 Firmware OTA Update Installed at least: Do this on device. Do Not download the OTA update from google's firmware website.
- ADB/Fastboot/Google Drivers for Windows: I use this to install- ADB 15sec Installer
- Magisk Manager APK: Github - Magisk Github Releases
- Firmware Matching Currently Installed: Google FW page - Google Official Firmware Downloads - you need this for the boot.img file
- A Windows Computer
- A USB-C cable to connect to your phone to the computer
OEM Unlock Bug
With early units sold by Google, they're shipping with a bug where OEM Unlock stays grayed out. Here's the only way I got around this issue
1.) Log out of any Google Account on the device
2.) Connect to Wifi, check for updates without your sim card in the device. There is a bug where it will potentially download the update for your carrier sim
3.) At minimum, you should get the June 2022 security patch update. Run the update and remember which update it is for when you download the firmware to get boot.img
4.) When the update is finished, Factory Reset your device either from settings or Android recovery
5.) Go through Android setup without sim card in, and don't connect to wifi, finish setup without logging into a google account or anything
6.) When setup is done, connect to wifi and put your sim back in.
7.) Pay attention in your notifications for "Preparing your Device" notification.
8.) When that notification pops up, enable Developer options (tap build number a bunch of times)
9.) OEM Unlock should be possible to enable now. Also enable USB Debugging
Pre-Root Setup
1.) Install Magisk Manager from Github
2.) Use 7zip (or any other ZIP opening program) to extract the boot.img from your firmware download from google
-- the boot.img is inside another zip file that's in the download from google. very easy to get
3.) Put the Boot.img on your phones internal storage
4.) Open Magisk Manager, and select your Boot.img from internal storage. Patch the boot.img to make it a rooted boot.img
5.) With your phone connected to the computer, move the magisk_patched.img from sdcard/downloads to your computer
6.) If USB debugging is properly enabled, now you can open CMD and reboot to bootloader with
Code:
adb reboot bootloader
Unlocking the bootloader
1.) With the device connected, OEM Unlock enabled, and booted to bootloader, you can unlock the bootloader with the following command
Code:
fastboot flashing unlock
-- If nothing changes on your phone screen, use Device Manager to make sure the device is recognized via google drivers: vid here on that - Quick Fastboot Drivers Install Tutorial
2.) On your phone, use the volume keys to select Unlock Bootloader, then hit the power button, device should reboot back to bootloader
3.) flash the boot partition with the magisk patched boot.img
Code:
fastboot flash boot magisk_patched.img
4.) Now you can reboot back into your device and you should be rooted!
Code:
fastboot reboot
Congrats! Now you're bootloader unlocked and rooted! GrapheneOS is already available if you want a degoogled rom, haven't seen another rom pop up yet
all done from there
updating your device when rooted
I do not have a pixel 6a specifically for this right now to confirm this will work, but on every other device with OTA's, this has been my process.
1.) Download your OTA using the system update part of Settings
2.) When it pops up and is ready to restart to finish installing the update, DO NOT CLICK RESTART IN SETTINGS/SYSTEM UPDATE
3.) Go to Magisk Manager, and select Install next to Magisk
4.) Select "Install to Inactive Slot (After OTA)
5.) When its done patching the boot partition, hit restart in Magisk
Your OTA Update is now rooted
To save time and effort here is the magisk patched boot.img for June 2022 patch level, Carrier Unlocked 6a from the Google Store. Make SURE you are on build SD2A.220601.003 before flashing!
To get the `OEM Unlock` option in Developer Options to work, it's simpler to just manually flash 12.1.0 (SD2A.220601.004, Jun 2022, Verizon, Verizon MVNOs) and then wipe.
Even though it's label as Verizon, it should work for all carriers.
Hello, if we have already unlocked the bootloader, we just have to do this: start cmd then fastboot flash boot magisk_patched.img then restart the phone?
jejemc said:
Hello, if we have already unlocked the bootloader, we just have to do this: start cmd then fastboot flash boot magisk_patched.img then restart the phone?
Click to expand...
Click to collapse
Correct, though I would probably fastboot boot first just to make sure it boots up ok. When it does you can reboot to recovery and flash it.
these instructions sound like "the usual process", but for the 6a isn’t there something to patch regarding vbmeta as well?
(never had a phone that "needed" this, but in my understanding it "should" be necessary with the 6a? won’t have time to try out myself before the weekend, just asking ..)
ctfrommn said:
Correct, though I would probably fastboot boot first just to make sure it boots up ok. When it does you can reboot to recovery and flash it.
Click to expand...
Click to collapse
here it is and does and works perfectly well thank you for everything.
Im starting work on my custom kernel now so hopefully MVK for Bluejay will be ready in the coming days/weeks.
Zaxx32 said:
To save time and effort here is the magisk patched boot.img for June 2022 patch level, Carrier Unlocked 6a from the Google Store. Make SURE you are on build SD2A.220601.003 before flashing!
Click to expand...
Click to collapse
As this thread ages, not everyone will have the June 2022 update. That's why I suggested/put the steps in to do it themselves with matching firmware to what their device is on.
benji said:
To get the `OEM Unlock` option in Developer Options to work, it's simpler to just manually flash 12.1.0 (SD2A.220601.004, Jun 2022, Verizon, Verizon MVNOs) and then wipe.
Even though it's label as Verizon, it should work for all carriers.
Click to expand...
Click to collapse
This DID NOT work for me. That's why I wrote this up the way I did.
jejemc said:
Hello, if we have already unlocked the bootloader, we just have to do this: start cmd then fastboot flash boot magisk_patched.img then restart the phone?
Click to expand...
Click to collapse
If you're bootloader is already unlocked, you just have to flash the patched magisk boot img, correct. I wrote this up for those having issue with not having the ability even if it is an unlocked from google device
frank93 said:
these instructions sound like "the usual process", but for the 6a isn’t there something to patch regarding vbmeta as well?
(never had a phone that "needed" this, but in my understanding it "should" be necessary with the 6a? won’t have time to try out myself before the weekend, just asking ..)
Click to expand...
Click to collapse
Correct, these are basically the usual steps. There's nothing regarding vbmeta flashing in this case of just rooting stock firmware. You only need to do that with ROMs (GSI's mainly)
KaptinBoxxi said:
3.) flash the boot partition with the magisk patched boot.img
Code:
fastboot flash boot magisk_patched.img
Click to expand...
Click to collapse
Just a heads up. As already told by ctfrommn, it's always a better approach to first boot the magisk patched boot file. And if everything works well and good, you could then Direct Install it via Magisk.
Although directly flashing should also work, but its always better to be on the safer side.
KaptinBoxxi said:
Correct, these are basically the usual steps. There's nothing regarding vbmeta flashing in this case of just rooting stock firmware. You only need to do that with ROMs (GSI's mainly)
Click to expand...
Click to collapse
I followed your steps to a T. Still can't unlock. I'm convinced there is a fault with my device itself at this point.
stormcrank said:
I followed your steps to a T. Still can't unlock. I'm convinced there is a fault with my device itself at this point.
Click to expand...
Click to collapse
they will warranty replace if it for sure fails still. Its a silly situation, but mistakes happen
binary**# said:
Just a heads up. As already told by ctfrommn, it's always a better approach to first boot the magisk patched boot file. And if everything works well and good, you could then Direct Install it via Magisk.
Although directly flashing should also work, but its always better to be on the safer side.
Click to expand...
Click to collapse
I may not be very active on XDA, but have been rooting and rom'ing devices since the palm pre, first android phone was the droid x. I've never heard of this step, its never been needed. Its an extra pointless step that is just tethered root. You don't need to do it. As long as you don't download a random Boot.img, like the one for some reason attached to a reply on this thread and get it yourself from the firmware matching your device OR flashing Magisk via TWRP/Lineage Recovery with adb sideload, there's no reason to fastboot boot the boot.img.
You may have never run into an issue flashing a boot image but I've built thousands of roms and kernels and have learned the hard way more than once to measure twice, cut once.
That said, as long as you're simply patching a stock boot.img it's likely not an issue.
Followed all steps, on SD2A.220601.003SD2A.220601.003. OEM unlock still greyed
Nice work, Kaptinboxxi. Everything worked fine. How should we handle updates after rooting? Will a security patch break root? If so, what is the best process to root it again?
Voxilli said:
Nice work, Kaptinboxxi. Everything worked fine. How should we handle updates after rooting? Will a security patch break root? If so, what is the best process to root it again?
Click to expand...
Click to collapse
Yes, each update will require reflashing a patched kernel for the new build.
You can also do the "Install to Inactive Slot" method in Magisk to update and keep root. This has been a bit of a hit and miss for some people on the Pixel 6 series, though. The misses may be in large part be due to people having modified their partitions or not restoring the necessary images while being on a custom kernel.
OTA Upgrade Guides
The Magic Mask for Android
topjohnwu.github.io
Lughnasadh said:
You can also do the "Install to Inactive Slot" method in Magisk to update and keep root.
OTA Upgrade Guides
The Magic Mask for Android
topjohnwu.github.io
Click to expand...
Click to collapse
Good call...I guess I've never messed with that as I flash so many kernels anyway.
Lughnasadh said:
You can also do the "Install to Inactive Slot" method in Magisk to update and keep root. This has been a bit of a hit and miss for some people on the Pixel 6 series, though. The misses may be in large part be due to people having modified their partitions or not restoring the necessary images while being on a custom kernel.
OTA Upgrade Guides
The Magic Mask for Android
topjohnwu.github.io
Click to expand...
Click to collapse
That's what I've done with my OnePlus 7T for the last three years. Any repercussions for doing it this way versus patching the kernel?