Related
This is For Going Back to Stock! The methods do require a little reading in the OP!
How to flash ROM KDZ Method
The Guide BELOW IS WORKING so if you have issues please check out the videos in the thread link at the end of the guide to hopefully help you out, If someone wants to make a clean new guide please PM me so I can post it up and Give credit Thank you! WARNING: Windows 8 and 8.1 Are having Permission issues, I don`t use Windows 8 so Googleling would help for running the script that needs permission.
The Files are Hosted on my server for fast speeds!
1). Download all The Files Below!
1.2). Get Your Firmware Files are HERE!
1.3). Download R&D FlashTool & Other Files :Here
1.4).Download Drivers HERE!
2. unzip
- LGMOBILEAX
- LG_KDZ_FW-Update_OfflineFix
3. install B2CAppSetup.exe in
LG_KDZ_FW-Update_OfflineFix\KDZ_FW_UPD_EN
4. go to C:\ProgramData\LGMOBILEAX
remove all files and folder
5. copy all files and folders from LGMOBILEAX that you unzip from step2 to C:\ProgramData\LGMOBILEAX
Method 1. work with vbs script
1. run Automatic Offline Procedure.vbs in \LG_KDZ_FW-Update_OfflineFix folder
2. now R&D test tools appear please select KDZ File
3. select Normal web upgrade test
4. Select Upgrade start
5. In Select Country & Langauage Please Select Country to Different Country (do not worry if does not has Langauage to select )
6. Process Flashing firmware start...Please waiting just moment.
7. for process 100% you is finishing flash return to stock firmware
Method 2. edit host file
thank @Hid3rs
1. Go to windows/system32/drivers/etc/ and open your hosts file! (open it with wordpad)
2 . Add this line at the end of the document:
127.0.0.1 csmg.lgmobile.com
3. Save hosts file
4. Install msxml (you can find it in the downloaded KDZ_FW_UPD_EN folder)
5. Start http in the shttps folder
6. Start Windows Enabler and turn it on (system tray!)
7. Start UpTestEX_mod2_marwin
8. Flash your .kdz as you normally would
Please post your results!!!!!
Here is Some Videos for Help if needed
http://forum.xda-developers.com/show...96&postcount=1
Click to expand...
Click to collapse
TOT Method for TOT Files:
Download Firmware Here -
Read this Thread for "How to Flash" http://forum.xda-developers.com/showthread.php?t=2475045
KDZ method Now up!!
Got the KDZ method up and going for everyone
F350S TOT or KDZ required
helton,
CAN YOU PLEASE HELP ME TO GET F350S TOT or KDZ because i did softbricked my phone.
haared said:
helton,
CAN YOU PLEASE HELP ME TO GET F350S TOT or KDZ because i did softbricked my phone.
Click to expand...
Click to collapse
I've been trying
Sent from my Nexus 5 using Tapatalk
hyelton said:
I've been trying
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
It doesnt seem to work. And I think my phone is not turnin on anymore. I will bring this on a repair shop of my friend they can do the trick.
Mary robert said:
n Italy LG warranty doesn't get voided by rooting and custom Rom installation.
I don't know why in other countries it's not the same...
Anyway thank you for sharing this information!
Click to expand...
Click to collapse
That doesn't make much since to me though. The part of rooting with EVERY phone company. Rooting voids warranty no matter what country.
Sent from my Nexus 5 using Tapatalk
hyelton said:
This is For Going Back to Stock! The methods do require a little reading in the OP!
How to flash ROM KDZ Method
The Guide BELOW IS WORKING so if you have issues please check out the videos in the thread link at the end of the guide to hopefully help you out, If someone wants to make a clean new guide please PM me so I can post it up and Give credit Thank you! WARNING: Windows 8 and 8.1 Are having Permission issues, I don`t use Windows 8 so Googleling would help for running the script that needs permission.
The Files are Hosted on my server for fast speeds!
1). Download all The Files Below!
1.2). Get Your Firmware Files are HERE!
1.3). Download R&D FlashTool & Other Files :Here
1.4).Download Drivers HERE!
TOT Method for TOT Files:
Download Firmware Here -
Read this Thread for "How to Flash" http://forum.xda-developers.com/showthread.php?t=2475045
Click to expand...
Click to collapse
Just for clarification, I now have this device after previously having a G2 and have this set up for the G2 on an old windows 7 laptop. Will my set-up now work for this device or is it different in any way?
g pro 2 d838 kdz
i have the hong kong edition 16G i have search for the d838 10b kdz but i didn't find it all the URL NOT WORKING can any body help
How to fix error cross dl SW[xxx] to SW[yyy]
There's no better tools yet for flashing?
Does the G3 suffer the same crappy flash tools that don't work under Windows 8/8.1?
donalgodon said:
There's no better tools yet for flashing?
Does the G3 suffer the same crappy flash tools that don't work under Windows 8/8.1?
Click to expand...
Click to collapse
all LG androids are the sane method
Sent from my SM-N9005 using Tapatalk
bobsie41 said:
Just for clarification, I now have this device after previously having a G2 and have this set up for the G2 on an old windows 7 laptop. Will my set-up now work for this device or is it different in any way?
Click to expand...
Click to collapse
It has been working on my G Pro and now on my G2. So I guess it will work on the G Pro 2 as well.
missing
Looks like the file are missing from the server.
stdiox said:
Looks like the file are missing from the server.
Click to expand...
Click to collapse
+++1
stdiox said:
Looks like the file are missing from the server.
Click to expand...
Click to collapse
am2006 said:
+++1
Click to expand...
Click to collapse
What files??? All files are there and work. If the op links arenot updating just follow the lg G2 back to stock guide of mine
Where is the .kdz file of g pro2?
أرسلت من LG-D802 بإستخدام تاباتلك
am2006 said:
Where is the .kdz file of g pro2?
أرسلت من LG-D802 بإستخدام تاباتلك
Click to expand...
Click to collapse
In the OP links…
hyelton said:
The Files are Hosted on my server for fast speeds!
1). Download all The Files Below!
1.2). Get Your Firmware Files are HERE!
Click to expand...
Click to collapse
If you meant here above, there is no kdz file for g pro 2, check by your self please, or may you give me the direct link .
check
hyelton said:
In the OP links…
Click to expand...
Click to collapse
Just check it. it is not there.
Hello,
I am trying to create backup of my Lenovo P70 using MtkDroidTools. I cannot create scatter file because when I click Block Map, "Create Scatter File" is grayed out. Please help me as I'm in urgent need of it.
Best Regards
sherazi21st said:
I am trying to create backup of my Lenovo P70 using MtkDroidTools. I cannot create scatter file because when I click Block Map, "Create Scatter File" is grayed out.
Click to expand...
Click to collapse
Do you see all the partitions listed (like recovery, boot, system) after clicking 'Block Map'?
If no, then it means phone is not connected properly.
Sometimes, you have to install drivers like Android CDC Gadget driver, Android VCOM drivers for it to work
GokulNC said:
Do you see all the partitions listed (like recovery, boot, system) after clicking 'Block Map'?
If no, then it means phone is not connected properly.
Sometimes, you have to install drivers like Android CDC Gadget driver, Android VCOM drivers for it to work
Click to expand...
Click to collapse
I See all partitions but their mount point is not there plus create scatter file is grayed out.
sherazi21st said:
I See all partitions but their mount point is not there plus create scatter file is grayed out.
Click to expand...
Click to collapse
Hi,
Same problem with another MT6753 device. Please, can you help for create the scatter file?
sherazi21st said:
I See all partitions but their mount point is not there plus create scatter file is grayed out.
Click to expand...
Click to collapse
manos78 said:
Same problem with another MT6753 device. Please, can you help for create the scatter file?
Click to expand...
Click to collapse
These MTK chips have 64-bit processors..
As of now, the MTK Droid Tools software isn't updated to support these new 64 bit chipsets.
You can try to manually create a scatter file, or check the phone manufacturer's website for complete firmware with a specific tool or XDA Firmware. (That might include a scatter file; IDK)
If you don't find any, better wait till a proper tutorial / update comes.
I think there'll be some solution to this in the Chinese forums..
The Chinese Smart phone companies are highly dependent on the cheap Mediatek chipsets..
So, you can try looking there if you have patience and use Google Translate with Chrome.
manos78 said:
Hi,
Same problem with another MT6753 device. Please, can you help for create the scatter file?
Click to expand...
Click to collapse
Which phone are you using? I've scatter of my phone and I'm able to flash using sp flash tools. If you're using a Lenovo phone then you'll find scatter and flash tool which will do your job.
sherazi21st said:
Which phone are you using? I've scatter of my phone and I'm able to flash using sp flash tools. If you're using a Lenovo phone then you'll find scatter and flash tool which will do your job.
Click to expand...
Click to collapse
Wiko Fever, see: http://forum.xda-developers.com/android/development/root-wiko-fever-t3242640/
GokulNC said:
These MTK chips have 64-bit processors..
As of now, the MTK Droid Tools software isn't updated to support these new 64 bit chipsets.
You can try to manually create a scatter file, or check the phone manufacturer's website for complete firmware with a specific tool
If you don't find any, better wait till a proper tutorial / update comes.
Click to expand...
Click to collapse
I'm doing the initial research/development. No firmware from manufacturer at time. I'm doing all with one unit of the device. I'm creating the scatter file manually using a ROM dump. My problem at time is that my dump isn't a full 16GB dump, only 1.5GB. :crying:
manos78 said:
Wiko Fever, see: http://forum.xda-developers.com/android/development/root-wiko-fever-t3242640/
Click to expand...
Click to collapse
Sorry, don't know about this phone. I've Lenovo and there's a Russian forum which covers almost all Lenovo phones.
Hi,
In the e3 recovery menu is an option for show the bootlog, inside it you can show the PARTION mapping of the device... with all info: partition name, start address, size... you can create the scatter file by hand with this info.
Here are the few steps to follow (If you want your phone back)
Things Needed
1. Dead Phone (Soft brick / Hard Brick)
2. QPST (For flashing) https://androidmtk.com/download-qpst-flash-tool
3. Firmware file https://www.firmware27.net/2017/10/asus-zenfone-max-z010d-zc550kl-firmware.html
4. USB
5. PC
Steps
1. Install QPST
2. Download the firmware file and extract it (LINK)
3. Charge your phone for a while though it displays nothing on your screen
4. Open QFIL ( C:\Program Files (x86)\Qualcomm\QPST\bin)
Select Flat build in (Build Type)
Select PROGRAMMER File (available in your firmware folder)
Then , In the download portion,
Select “Load XML”
Then, select rawprogram0 and then patch0
Finally, you have done the basic steps
Now, Go to Device manager
For some persons, Qualcomm HS-USB loader (COM PORT) won’t appear.
To enable it, Just plug in your usb to your mobile and press “Power On “ for a while.
Then you can see the port in QFIL too.
Then press download…..
rhudsonsamuel said:
Here are the few steps to follow (If you want your phone back)
Things Needed
1.Dead Phone (Soft brick / Hard Brick)
2.QPST (For flashing) https://androidmtk.com/download-qpst-flash-tool
3.Firmware file https://www.firmware27.net/2017/10/asus-zenfone-max-z010d-zc550kl-firmware.html
4.USB
5.PC
Steps
1.Install QPST
2.Download the firmware file and extract it (LINK)
3.Charge your phone for a while though it displays nothing on your screen
4.Open QFIL ( C:\Program Files (x86)\Qualcomm\QPST\bin)
Select Flat build in (Build Type)
Select PROGRAMMER File (available in your firmware folder)
Then , In the download portion,
Select “Load XML”
Then, select rawprogram0 and then patch0
Finally, you have done the basic steps
Now, Go to Device manager
For some persons, Qualcomm HS-USB loader (COM PORT) won’t appear.
To enable it, Just plug in your usb to your mobile and press “Power On “ for a while.
Then you can see the port in QFIL too.
Then press download…..
Click to expand...
Click to collapse
The blog containing links is in Indonesian, why don't you write out a more explicit guide with the files needed in English. You can send me a PM with more explicit instructions and I'll start a more complete and explicit thread.
rhudsonsamuel said:
Here are the few steps to follow (If you want your phone back)
Things Needed
1.Dead Phone (Soft brick / Hard Brick)
2.QPST (For flashing) https://androidmtk.com/download-qpst-flash-tool
3.Firmware file https://www.firmware27.net/2017/10/asus-zenfone-max-z010d-zc550kl-firmware.html
4.USB
5.PC
Steps
1.Install QPST
2.Download the firmware file and extract it (LINK)
3.Charge your phone for a while though it displays nothing on your screen
4.Open QFIL ( C:\Program Files (x86)\Qualcomm\QPST\bin)
Select Flat build in (Build Type)
Select PROGRAMMER File (available in your firmware folder)
Then , In the download portion,
Select “Load XML”
Then, select rawprogram0 and then patch0
Finally, you have done the basic steps
Now, Go to Device manager
For some persons, Qualcomm HS-USB loader (COM PORT) won’t appear.
To enable it, Just plug in your usb to your mobile and press “Power On “ for a while.
Then you can see the port in QFIL too.
Then press download…..
Click to expand...
Click to collapse
I found out you can't even download files from the site given, this post looks like something fishy [emoji11]
jide1 said:
I found out you can't even download files from the site given, this post looks like something fishy [emoji11]
Click to expand...
Click to collapse
In the bottom of the (ad page) there will be the "link"
https://drive.google.com/file/d/0B0ul1vuE3yJwbTNScXhDYkx6cW8/view?usp=sharing
ZENFONE
jide1 said:
The blog containing links is in Indonesian, why don't you write out a more explicit guide with the files needed in English. You can send me a PM with more explicit instructions and I'll start a more complete and explicit thread.
Click to expand...
Click to collapse
It says Download Fail:Sahara Fail:QSahara server Failrocess fail
what to do next ?
MJMarra34 said:
It says Download Fail:Sahara Fail:QSahara server Failrocess fail
what to do next ?
Click to expand...
Click to collapse
The same problem with a friend, maybe the firmware for qfil is corrupted.
MJMarra34 said:
It says Download Fail:Sahara Fail:QSahara server Failrocess fail
what to do next ?
Upload the screenshot or log file here!!!
Click to expand...
Click to collapse
rhudsonsamuel said:
MJMarra34 said:
It says Download Fail:Sahara Fail:QSahara server Failrocess fail
what to do next ?
Upload the screenshot or log file here!!!
Click to expand...
Click to collapse
having the same problem , uploaded log after using different versions of qpst\qfil
Click to expand...
Click to collapse
rhudsonsamuel said:
MJMarra34 said:
It says Download Fail:Sahara Fail:QSahara server Failrocess fail
what to do next ?
Upload the screenshot or log file here!!!
Click to expand...
Click to collapse
any suggestions ?
Click to expand...
Click to collapse
jide1 said:
rhudsonsamuel said:
any suggestions ?
Click to expand...
Click to collapse
Extract the files to this location...
C:\Program Files (x86)\Qualcomm\QPST\bin
Don't put any file in any folder form....
Click to expand...
Click to collapse
rhudsonsamuel said:
jide1 said:
Extract the files to this location...
C:\Program Files (x86)\Qualcomm\QPST\bin
Don't put any file in any folder form....
Click to expand...
Click to collapse
I'll do it and let you know, can i write a PM to you after?
Click to expand...
Click to collapse
rhudsonsamuel said:
jide1 said:
Extract the files to this location...
C:\Program Files (x86)\Qualcomm\QPST\bin
Don't put any file in any folder form....
Click to expand...
Click to collapse
Thanks a lot, the problem was actually because we were trying to flash the device using the 8916 qpst firmware not knowing that the device was a 8939 one, so we tried the 8939 firmware and it worked, BUT, now we're in factory mode, the file you have available to exit factory mode is for the 8916 device, can you please upload for the 8939 device? Or is there another way to exit factory mode ?
Click to expand...
Click to collapse
jide1 said:
rhudsonsamuel said:
Thanks a lot, the problem was actually because we were trying to flash the device using the 8916 qpst firmware not knowing that the device was a 8939 one, so we tried the 8939 firmware and it worked, BUT, now we're in factory mode, the file you have available to exit factory mode is for the 8916 device, can you please upload for the 8939 device? Or is there another way to exit factory mode ?
Click to expand...
Click to collapse
May try this!
https://drive.google.com/file/d/1gPHakGQUKlL8HeZOZkPW9-X4NqaCqiGe/view?usp=drivesdk
Click to expand...
Click to collapse
rhudsonsamuel said:
jide1 said:
May try this!
https://drive.google.com/file/d/1gPHakGQUKlL8HeZOZkPW9-X4NqaCqiGe/view?usp=drivesdk
Click to expand...
Click to collapse
For me...sd410 it worked
Click to expand...
Click to collapse
rhudsonsamuel said:
rhudsonsamuel said:
For me...sd410 it worked
Click to expand...
Click to collapse
yes it definately will work for the 410 (8916) device , we tried it initially , but its not working for the 615 (8939) device , any suggestion ?
Click to expand...
Click to collapse
jide1 said:
rhudsonsamuel said:
yes it definately will work for the 410 (8916) device , we tried it initially , but its not working for the 615 (8939) device , any suggestion ?
Click to expand...
Click to collapse
I don't know bro..
Am just a noob in Qualcomm flashing....
I have sd410....many users are using this chipset...
And many have hardbricked like me...
So, I just shared what God helped me to fix my phone...
Click to expand...
Click to collapse
rhudsonsamuel said:
jide1 said:
I don't know bro..
Am just a noob in Qualcomm flashing....
I have sd410....many users are using this chipset...
And many have hardbricked like me...
So, I just shared what God helped me to fix my phone...
Click to expand...
Click to collapse
Thanks for sharing anyway, we'll find a workaround.
Click to expand...
Click to collapse
jide1 said:
rhudsonsamuel said:
Thanks for sharing anyway, we'll find a workaround.
Click to expand...
Click to collapse
Okay thanks
Click to expand...
Click to collapse
jide1 said:
rhudsonsamuel said:
Thanks a lot, the problem was actually because we were trying to flash the device using the 8916 qpst firmware not knowing that the device was a 8939 one, so we tried the 8939 firmware and it worked, BUT, now we're in factory mode, the file you have available to exit factory mode is for the 8916 device, can you please upload for the 8939 device? Or is there another way to exit factory mode ?
Click to expand...
Click to collapse
Hey man, I'm just a noob but how'd you get the 8939 version of your Qpst? Do you have a link for that or do we just need to do a little config? I still got no progress with my bricked Asus.. How bout yours?
Click to expand...
Click to collapse
MJMarra34 said:
jide1 said:
Hey man, I'm just a noob but how'd you get the 8939 version of your Qpst? Do you have a link for that or do we just need to do a little config? I still got no progress with my bricked Asus.. How bout yours?
Click to expand...
Click to collapse
Its actually not my phone bricked, just helping a friend with his bricked phone, at this moment, everything is now up and running, so contact me privately to get details.
Click to expand...
Click to collapse
I have obtained a copy of tool multi tool for flashing/unbricking Oppo devises
I still don't know how to use it as it displays "invalid scatterfile format" when loading the ofp file.
fil3s said:
I have obtained a copy of tool multi tool for flashing/unbricking Oppo devises
I still don't know how to use it as it displays "invalid scatterfile format" when loading the ofp file.
Click to expand...
Click to collapse
can share the link again please . The file is not available by the link provided.
tailedbeast said:
can share the link again please . The file is not available by the link provided.
Click to expand...
Click to collapse
I don't recommend using tools available to flash oppo phones but u can grab it here.
I haven't tested it and I doubt it will work. I don't own an oppo anymore.
fil3s said:
I don't recommend using tools available to flash oppo phones but u can grab it here.
I haven't tested it and I doubt it will work. I don't own an oppo anymore.
Click to expand...
Click to collapse
the file is password protected . what is the password ?
Idk. I forget. I made this post 2 yrs ago. :silly:
Mod, please delete this post.
MOD ACTION:
Thread closed at the request of OP.
So I just got the Aristo 3 and wanted to root it. after an extensive search I have come up empty. Does anyone know if there is a method available to use yet or maybe something is in the works? I've unlocked flashing but I cant seem to boot recovery. Any help would be greatly appreciated.
Same ive spent about 6 hours researching this ive never built my own root before however i just dont have the time to do whats needed. From what i researched get the original boot rom from lg bridge and perform a restore to download the factory boot image then use magisk to rebuild the image
Nvitethedark said:
Same ive spent about 6 hours researching this ive never built my own root before however i just dont have the time to do whats needed. From what i researched get the original boot rom from lg bridge and perform a restore to download the factory boot image then use magisk to rebuild the image
Click to expand...
Click to collapse
Hmm I'll give it a try. The phone is still new enough that I don't have much saved to it and if I brick it can take it back
should be able to just get the boot image may be the aristo 2 dev would pick this up since he's familiar with it I see you have a few posts in that forum maybe you can send that dev a message see if they would pick it up.
I eagerly await any progress in this run! My girlfriend cracked her screen on her Aristo 2 and decided that it was time to upgrade. I've never been disappointed in the idea of upgrading my phone...until it meant giving up my Aristoboy Mk.2(which was/is quite formidable)and rooted status along with it. If there is anything I might read about the process online, I would at very least consider the task myself. I am learning, but I have some decent skills and experience behind me. Please let me know if I can assist in any way. If not, I hope to see the first strides towards tackling this latest addition to the Aristo line!
My thanks to all my fellow devs here! You each make up a piece of the whole collection that make this, hands down the best forum/online community available the world over! Keep it up! We are making a difference in so many lives!
Your friend,
~[ProTech]~
So I've been busy as **** lately, but I found that the issue seems to be with the os more than the phone itself. I'm not that proficient with downgrading the os to a earlier version since this phone came stock with Oreo. I will try and talk to some of the devs who did the aristo 2 x210ma. Hopefully they have a solution. I've been using my 2 instead. I never realized how much you can't do with a stock phone and os.
OK here's something you can try...
first get dev-patched LGup {GooGle It}
then use the Dump function of Lgup to dump All partitions from your fone...
look for boot_COM{some#here} and rename it to boot.img
put that file on your fones sdcard and install magisk manager app.
use magisk manager app to patch that boot.img file.
find the new file patched_boot.img whereever magisk put it on your sdcard...
move it to your desktop or a folder etc. on P.C
now try to flash it to your fone...
Code:
adb reboot bootloader
Code:
fastboot oem unlock
if that works your bootloader is now unlocked you'll have to reboot the fone once as it'll erase cache and data...
after that
again do
Code:
adb reboot bootloader
now try
Code:
fastboot flash boot patched_boot.img
if that works....
Code:
fastboot reboot
and you'll have root by magisk.
if fastboot's not working other option is to rename "patched_boot.img" to "boot.img"
and then use Partitions DL option in lgup to flash the "patched"boot.img to the phone...
if that works you'll have root by magisk...
If this helped you feel free to hit thanks and come back to post the results plz.
Thanks
LgPWN'd said:
OK here's something you can try...
first get dev-patched LGup {GooGle It}
then use the Dump function of Lgup to dump All partitions from your fone...
look for boot_COM{some#here} and rename it to boot.img
put that file on your fones sdcard and install magisk manager app.
use magisk manager app to patch that boot.img file.
find the new file patched_boot.img whereever magisk put it on your sdcard...
move it to your desktop or a folder etc. on P.C
now try to flash it to your fone...
Code:
adb reboot bootloader
Code:
fastboot oem unlock
if that works your bootloader is now unlocked you'll have to reboot the fone once as it'll erase cache and data...
after that
again do
Code:
adb reboot bootloader
now try
Code:
fastboot flash boot patched_boot.img
if that works....
Code:
fastboot reboot
and you'll have root by magisk.
if fastboot's not working other option is to rename "patched_boot.img" to "boot.img"
and then use Partitions DL option in lgup to flash the "patched"boot.img to the phone...
if that works you'll have root by magisk...
If this helped you feel free to hit thanks and come back to post the results plz.
Thanks
Click to expand...
Click to collapse
My bootloader is already unlocked I've just not been able to flash anything with fastboot. So I have LGup, is there a difference with the dev patched one? I also have magisk on my phone, but it really doesn't give me any options besides to install a new version. I'm gonna go try your suggestion soon though...it sounds promising...and may open up other options if this doesn't succeed. Thanks I'll keep you posted.
Reckless459 said:
My bootloader is already unlocked I've just not been able to flash anything with fastboot. So I have LGup, is there a difference with the dev patched one? I also have magisk on my phone, but it really doesn't give me any options besides to install a new version. I'm gonna go try your suggestion soon though...it sounds promising...and may open up other options if this doesn't succeed. Thanks I'll keep you posted.
Click to expand...
Click to collapse
PLease let us know how it go's...
I'm trying to port and compile Multi-rom for LG-aristo Lg-m210 at the moment...
So I have LGup, is there a difference with the dev patched one?
.
Click to expand...
Click to collapse
in answer to that YES quite a difference...
devpatched lgup gives you extra options such as Dump and Partitions-DL and Chiperase among others...
you'll NEED that dump and partitions-DL option....
LgPWN'd said:
PLease let us know how it go's...
I'm trying to port and compile Multi-rom for LG-aristo Lg-m210 at the moment...ll
Click to expand...
Click to collapse
So I can't get passed the dump. I keep getting a timed out error. I even tried to format the user data using fastboot and it failed. And I am curious about the boot_COM. I didn't see any file in the partition list matching that. I did see the boot partition and many others that I didn't recognize. So kinda feeling that we are back to
Reckless459 said:
So I can't get passed the dump. I keep getting a timed out error. I even tried to format the user data using fastboot and it failed. And I am curious about the boot_COM. I didn't see any file in the partition list matching that. I did see the boot partition and many others that I didn't recognize. So kinda feeling that we are back to
Click to expand...
Click to collapse
No the file wont say that in lgup, it'll be named that after you create a new folder on desktop call it "Dump" then use the dev-patched lgup and Dump option, select the folder Dump on the desktop and select the little checkbox for all on partitions list and click start...
also you may be haveing issues because of the .dll your useing... will lgup flash a stock .kdz to the device?
if yes, I'd think the dump option would work fine...
for firmware look here : https://www.mylgphones.com/metropcs-lg-aristo-3-lmx220ma-x220ma-firmware.html
for direct download use this link
Code:
http://pkg02.lime.gdms.lge.com/dn/downloader.dev?fileKey=FW88KEQ4C2VSAF0C3D54FH4/X220MA10e_00_MPCS_US_OP_0123.kdz
LgPWN'd said:
No the file wont say that in lgup, it'll be named that after you create a new folder on desktop call it "Dump" then use the dev-patched lgup and Dump option, select the folder Dump on the desktop and select the little checkbox for all on partitions list and click start...
also you may be haveing issues because of the .dll your useing... will lgup flash a stock .kdz to the device?
if yes, I'd think the dump option would work fine...
for firmware look here : https://www.mylgphones.com/metropcs-lg-aristo-3-lmx220ma-x220ma-firmware.html
for direct download use this link
Code:
http://pkg02.lime.gdms.lge.com/dn/downloader.dev?fileKey=FW88KEQ4C2VSAF0C3D54FH4/X220MA10e_00_MPCS_US_OP_0123.kdz
Click to expand...
Click to collapse
So yes it would load a stock formware but no it wouldn't allow me to dump even one partion. And the strange thing was that my list of options would chanhe sometimes. Like it would give me more options i.e. phonesettings. I even tried different cables and ports. It doesnt matter though i somehow hard bricked it so bad that it won't even. Boot to download mode and somehow fried my sim card to the point it wont work in any other phone. Im just waiting for metro to open so i can try again
Reckless459 said:
So yes it would load a stock formware but no it wouldn't allow me to dump even one partion. And the strange thing was that my list of options would chanhe sometimes. Like it would give me more options i.e. phonesettings. I even tried different cables and ports. It doesnt matter though i somehow hard bricked it so bad that it won't even. Boot to download mode and somehow fried my sim card to the point it wont work in any other phone. Im just waiting for metro to open so i can try again
Click to expand...
Click to collapse
OH WOW what a mess...
I would say it's the .dll in the LGUP causing pain here...
something you can try when you're ready to try again....
remove/uninstall devpatched LGUP and install regular store version
use the Common .dll
and add this file{ UI_Config.lgl } to your Common folder in the lgup install location ...
to make it easier I'll just zip up My common folder for you to replace yours
to do this
right click on lgup, select open file location...
navigate to the model subfolder you'll see things like
{ AllinOne } {Common} and {LGUP_LGNPST} folders...
at that point just right click and rename {Common} folder to {Commonbak},
then take my zip file I'm attaching and unzip it and inside will be Common folder...
just Copy / Paste that new Common folder to where the old one is..
set permissions of folder { read-only} and open the folder find file called { UI_Config.lgl }
and set it's permissions to READ ONLY . otherwise it'll be erased once you start LGUP.
and see If that changes anything with being able to Dump...
It's let me dump every LG i've plugged into it...
so I should think it should work for you too...
@Reckless459
is there nothing further?
LgPWN'd said:
@Reckless459
is there nothing further?
Click to expand...
Click to collapse
Dude...
First off let me say MertoPCS has the biggest pile of **** customer care department. I'm still waiting on my new device to comr from the warrenty department. I did however fix the sim issue (again metro sucks leaky bowels). I will definitely post any new developments as soon as the happen.
Oh also i did a dump on another phone (aristo 2) and had no issuses. And i saw what ypu meant with the boot_COM##. Thanks for the help.
LGUP dll
Sorry apparently i haven't reloaded this page in 12 hrs and their has been progressing i have 2 aristos im going to work on this also.
i will step in and help out ill read the updates and post further
---------- Post added at 09:43 PM ---------- Previous post was at 09:35 PM ----------
LgPWN'd said:
@Reckless459
is there nothing further?
Click to expand...
Click to collapse
I had a question i would like to chime in here, can i do an extraction on the KDZ with lg extractor i see a boot image in it and flash that?
Nvitethedark said:
Sorry apparently i haven't reloaded this page in 12 hrs and their has been progressing i have 2 aristos im going to work on this also.
i will step in and help out ill read the updates and post further
---------- Post added at 09:43 PM ---------- Previous post was at 09:35 PM ----------
I had a question i would like to chime in here, can i do an extraction on the KDZ with lg extractor i see a boot image in it and flash that?
Click to expand...
Click to collapse
it may work,
when lgup is being a pain it's worth a try.
I say go for it. but to be certain I'd try flashing the extracted boot.img with partitions DL option in lgup once to make sure it flashes it b4 trying to patch it and flash it again...
Just my 2 cents.
LgPWN'd said:
it may work,
when lgup is being a pain it's worth a try.
I say go for it. but to be certain I'd try flashing the extracted boot.img with partitions DL option in lgup once to make sure it flashes it b4 trying to patch it and flash it again...
Just my 2 cents.
Click to expand...
Click to collapse
Aristo3 FW: X220MA10B "10b" came on the system stock
LGUP V1.14 - patched
DLL v1.0.28.17
The above dll is the only one I have found that will recognize the phone and load LGUP, I have also attempted to use uppercut: Error DLL for X220M10b is invalid install a valid dll
https://imgur.com/1Ptrv3n
however, once i attempt to dump phone reboots into download mode i get: Error: 0x2000, please use latest Dll LAF protocol version is not match dll=0 device 162512928
https://imgur.com/5I7GfOa
I attempted to use the LGUPC DLL from the kdz V 10E firmware and that did not recognize the device i also attempted to use your zipped commons.
any feedback on this?
I feel that i should use LG tool update to 0F then use the 0F kdz to attempt all this?
DOWNGRADE Don't UPGRADE
Nvitethedark said:
Aristo3 FW: X220MA10B "10b" came on the system stock
LGUP V1.14 - patched
DLL v1.0.28.17
The above dll is the only one I have found that will recognize the phone and load LGUP, I have also attempted to use uppercut: Error DLL for X220M10b is invalid install a valid dll
https://imgur.com/1Ptrv3n
however, once i attempt to dump phone reboots into download mode i get: Error: 0x2000, please use latest Dll LAF protocol version is not match dll=0 device 162512928
https://imgur.com/5I7GfOa
I attempted to use the LGUPC DLL from the kdz V 10E firmware and that did not recognize the device i also attempted to use your zipped commons.
any feedback on this?
I feel that i should use LG tool update to 0F then use the 0F kdz to attempt all this?
Click to expand...
Click to collapse
If at all posible find the OLDEST firmware possible in kdz and do a full flash of that .
and try your dll mod with that by extracting the dll from said kdz and renaming to what ever the one in Common folder is and keep the UI_Config.lgl in there to keep the extra options if possible...
It's all trial and error with this stuff, so keep at it.
DO NOT flash a firmware.kdz from a different model of the device as it'll flash aboot sbl etc and you'll end with a brick that can't be fixed.
and I've always liked { in my experiments} to use the partitions DL option even when downgrading etc to be able to NOT CHOOSE the boot-stack partitions...
but give it a shot and tell us how it go's.
we may be able to split a root-bounty if we come up with something working across users
LgPWN'd said:
OH WOW what a mess...
I would say it's the .dll in the LGUP causing pain here...
something you can try when you're ready to try again....
remove/uninstall devpatched LGUP and install regular store version
use the Common .dll
and add this file{ UI_Config.lgl } to your Common folder in the lgup install location ...
to make it easier I'll just zip up My common folder for you to replace yours
to do this
right click on lgup, select open file location...
navigate to the model subfolder you'll see things like
{ AllinOne } {Common} and {LGUP_LGNPST} folders...
at that point just right click and rename {Common} folder to {Commonbak},
then take my zip file I'm attaching and unzip it and inside will be Common folder...
just Copy / Paste that new Common folder to where the old one is..
set permissions of folder { read-only} and open the folder find file called { UI_Config.lgl }
and set it's permissions to READ ONLY . otherwise it'll be erased once you start LGUP.
and see If that changes anything with being able to Dump...
It's let me dump every LG i've plugged into it...
so I should think it should work for you too...
Click to expand...
Click to collapse
reinstalled a non-patched version of lgup and used your common folder and set read-only options attempted a dump got this:
https://imgur.com/FJPMUwv