DISCLAIMER:
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
I have the full right from the owner of Cronos, to modify, customize and distribute the current kernel under different name.
Modifying and re-uploading this kernel distribution is not allowed.
INFO:
KRAKEN is a friendly oriented project for powerful users and gamers.
KRAKEN supports Project Spaget and OneUI ROMs.
Android Version Support:
Android Pie
Android Q
COMPATIBLE VENDORS [ARM64] :
ARM64 for A3x 2017 by @Astrako
ARM64 for A6x 2018 by @ShaDisNX255
ARM64 for J6x 2018 by @ShaDisNX255
ARM64 for J5x 2017 by @ananjaser1211
ARM64 for J7x 2017 by @ananjaser1211
SUPPORTED DEVICES:
A320x
A600x
J530x
J600x
G610x
J701x
J710x
J730x
FEATURES:
KERNEL:
Based on J530FXWU5CSH7 source
Upstreamed to Linux 3.18.140
Compiled with Linaro's GCC 7.5 Toolchain (2019.12)
Compiled with -pipe, -funroll-loops (GPU), -ffast-math (GPU), -O3, ARM related hardware GCC optimizations and graphite optimizations
Permessive SELinux
Fake KNOX Warranty Status (0x0)
Optimized for Performance
Fast boot (Increased cluster booting frequency)
Heterogeneous Multi-core Processing (PORT from Exynos 7904)
Mali: r29p0 driver (A600FNXXU5CTB9)
Custom Voltage Control (CPU/GPU/MIF/CAM and more)
Dynamic FSync (FSync ON/OFF)
Samsung's LPM (Treble)
ARM32/64 Ready (Treble and OneUI)
HOTPLUG:
Samsung's Hotplug (disabled)
CLOCKS:
OSCCLK frequency up to 27 MHz (FSB)
CL0 frequency up to 1.75 GHz (Small Cluster)
CL0 frequency down to 343 MHz (Small Cluster)
CL1 frequency up to 1.86 GHz (Big Cluster)
CL1 frequency down to 343 MHz (Big Cluster)
G3D frequency up to 1040 MHz (GPU)
G3D frequency down to 343 MHz (GPU)
BUS frequency up to 1937 MHz in dual-channel (RAM)
BUS frequency up to 968 MHz in single-channel (RAM)
MIF switching frequency up to 902 MHz (DEVFREQ)
CAM rebooting frequency up to 533 MHz (DEVFREQ)
TMU (Exynos Thermal Management Unit):
Increased thermal limits for CL0 (Small Cluster)
Increased thermal limits for CL1 (Big Cluster)
Increased thermal limits for G3D (GPU)
DVFS (Dynamic voltage and frequency scaling):
CPU: disabled
GPU: disabled
TCPs:
westwood (default)
bic
cubic
htcp
reno
I/O's:
bfq (default)
noop
deadline
row
cfq
maple
fifo
fiops
sio
sioplus
tripndroid
vr
zen
GOVERNORS:
interactive
interactives9 (default)
blu_active
cafactive
impulse
ondemandplus
bioshock
dancedance
electrodemand
hyper
intellidemand
smartass2
pegasusq
ondemandx
wheatley
thunderstorm
VARIOUS:
Boeffla Wakelock blocker
Powersuspend
WireGuard
Power Efficient workqueues
Ultra Kernel Samepage Merging
Butterizer
ROOT:
KRAKEN doesn't come with Magisk support, but you can manually download and install it from here: Magisk v20.3
SUPPORT:
In thread.
Telegram Group.
CREDITS:
Me, for developing without a device and for the struggle to test new things.
@ananjaser1211 for making this whole thing possible with his amazing work on HeliosPie.
@corsicanu for his great contribution to HeliosPie.
@Astrako for being the first one to test KRAKEN on his A3.
@LelMwhLwl for testing every single kernel image provided by me on his J5.
@kique119 for testing almost every single kernel image on his J7, for including me in his documentation and for the huge boost on what I am doing.
@Me2 for testing many of the provided images.
Thanks to anyone else who made this whole thing possible but it's not included, you are part of it as well!
XDA:DevDB Information
KRAKEN-Kernel for Galaxy Exynos 7870 devices, Kernel for the Samsung Galaxy A3/J5/J7/A6/J7 2017/2018
Contributors
SPARTANICUS, ananjaser1211
Source Code: KRAKEN
ROM OS Version: 9.x +
ROM Kernel: Linux 3.18.140
ROM Firmware Required: Pie Bootloader
Version Information
Status: Stable
Current Stable Version: RC15
Created 2019-08-13
Last Updated 2020-03-27
DOWNLOADS:
Stable Releases
INSTALLATION:
Download the provided KRAKEN-Kernel-VERSION-universal7870-OS-DATE.zip file, place the file in your internal storage or sdcard.
Boot into your recovery, find the "KRAKEN-Kernel...".zip package and flash it.
The package will detect your device and it will flash the right kernel for your device. After the flash was successful you can reboot your device.
Thread is updated, there's also a new KRAKEN version! Enjoy it and report problems as usual.
The overclocking feature of both the gpu and cpu is what attracted me towards this kernel so great job with that dev
But the problem is whenever i flash this kernel, with or without magisk, my phone gets stuck in an infinite boot loop. Tried force rebooting my phone a couple of times but that didnt work either. Im currently using cronos kernel v5 on my j600f running ARM64 HavocOS v2.9
Is there something im messing up in flashing your kernel?
KRAKEN-Kernel-RC10 boot ok in J710MN.
Sometimes system gets a little slow. Altogether, it is a great kernel and more stable than the RC-06 version.
after set 1924 mhz there is reboot
j600f
downvolt to 1300 and 1275 mv is fix it
Kraken RC 15 stable
Release KRAKEN-KERNEL ยท OGKUARA/android_kernel_samsung_exynos7870
RC15: Changelog: hotplug: disabled on boot kernel: possible reboot fix drivers: battery: limited charging to 1.55A J730X: support for 2A charge A320X: support for 2A charge J600X: support for 2A c...
github.com
Hello, I would like to ask a question Are there bugs in this rom and if there are, can you tell me what bugs are there? I hope your answers have a good day, afternoon or night.
Hey
works on
[ROM][UNOFFICIAL][j6lte][10] LineageOS 17.1
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device. LineageOS is based on the Android Open Source Project with extra...
forum.xda-developers.com
??
physwizz a12s kernel version 6.2
Based on a127f U1 binary
NOT for baseband u3 or higher
U4 version in post #2
For OneUI 3.1
( also works for GSIs)
MTP for GSIs (from Topser)
Samsung securities disabled
More CPU governors
Conservative, On-demand, Userspace, powersave, performance, energy_step, shedutil
Optimised for performance
Overclocked for performance
Underclocked for battery
CPU: 130MHz - 2210MHz
GPU: 377MHz - 1196MHz
lz4 default compression added to zram
Installation
Backup boot
Install from TWRP
Reboot
Kernel
physwizz - Repositories
physwizz has 172 repositories available. Follow their code on GitHub.
github.com
@physwizz
physwizz a12s kernel version 6.2
Based on a127f U4 binary
For OneUI 3.1
( also works for GSIs)
MTP for GSIs (from Topser)
Samsung securities disabled
More CPU governors
Conservative, On-demand, Userspace, powersave, performance, energy_step, shedutil
Optimised for performance
Overclocked for performance
Underclocked for battery
CPU: 130MHz - 2210MHz
GPU: 377MHz - 1196MHz
lz4 default compression added to zram
Installation
Backup boot
Install from TWRP
Reboot
Kernel
physwizz - Repositories
physwizz has 172 repositories available. Follow their code on GitHub.
github.com
@physwizz
issue: System UI crash
Endermanch said:
issue: System UI crash
Click to expand...
Click to collapse
Sorry about that. U2 works OK.
I'll look into it for u4
Endermanch said:
issue: System UI crash
Click to expand...
Click to collapse
You on u4 baseband?
Go to this post to find them
A127f Android 12 kernels
physwizz a127f S kernel version 1 (Version 2 in post #3) For OneUI 4 ( also works for GSIs) Samsung securities disabled More CPU governors Conservative, On-demand, Userspace, powersave, performance, energy_step, shedutil Optimised for...
forum.xda-developers.com
what kernel should i use for the a127f/dsn pixel experience rom
i run m127g with the cr droid rom. Even when i used lineage, flashing the kernel always boot looped. just wanted to know if anyone had success with it
Aurniox said:
i run m127g with the cr droid rom. Even when i used lineage, flashing the kernel always boot looped. just wanted to know if anyone had success with it
Click to expand...
Click to collapse
What Android & binary?
Try this one
Android 12
physwizz f127g kernel
For Android 12
For OneUI 4.1 and for GSIs
Samsung securities disabled
More CPU governors
Conservative, On-demand, Userspace, powersave, performance, energy_step, shedutil
Optimised for performance
Overclocked for performance
Underclocked for battery
CPU: 130MHz - 2210MHz
lz4 compression added to zram
Extra i/o controller
Installation
Physwizz Collection
Installing physwizz custom kernels INSTALL AT YOUR OWN RISK I AM NOT RESPONSIBLE FOR ANY BRICKED PHONES But I will help any well-mannered person to recover. Note: physwizz kernels work best with debloated stock or with wizzROM Other custom ROMs may not be supported A. Preparation 1...
t.me
Kernel source code
physwizz - Repositories
physwizz has 172 repositories available. Follow their code on GitHub.
github.com
===========================
A12s Channel: https://t.me/a127f_res
A12s group: https://t.me/a12schat
Physwizz group: https://t.me/physwizz3
Physwizz Channel: https://t.me/physwizz2
@physwizz
Help me i am using this kernel and its working(m127f) but wifi is turning itself off.is there any way to fix it?