Database Info

Convert SM-G930T to SM-G930A so I can use AT&T LTE bands.

Hi All, I want to continue using my AT&T prepaid plan but I recently bought a locked T-Mobile Galaxy S7 SM-G930T (I'm going to try to unlock it - if that doesn't work this is all moot). I would like to flash AT&T firmware so I can use the AT&T LTE bands. Can I follow the instructions in the link below once I've unlocked a T-Mobile SM-G930T and turn it into a SM-G930A?
http://www.droidviews.com/nougat-firmware-on-att-galaxy-s7s7-edge-sm-g930a-g935a/
I've read the link below... but it seems to be only if you want to continue using T-Mobile service which I don't.
https://forum.xda-developers.com/tm...w-to-flash-att-nougat-to-t-mobile-s7-t3553610

Changing firmware doesn't have anything to do with what bands the hardware supports. Unlock it and throw the ATT SIM in. Only difference is carrier supported features and software (wifi calling, etc). Flashing ATT modem might improve coverage but all S7 support the same bands.

Thanks buddy for the reply. I'm used to using a custom ROM on my Android phones so this is new. Mostly CyanogenMod.
That's good to know I don't need to flash in order to get the bands but I understand I need to if I want OTA updates from at&t. It seems relatively simple that you just flash the AT&T ROM over the T-Mobile with Odin and then use some update file. It doesn't even effect Samsung pay and Knox which is great.
Stupid question: is the AT&T modem included with the AT&T rom? Also, with regards to the 2nd link in the OP what is the update file that you put on the sdcard to use in recovery - is that an OTA update because your ROM is different from your carrier?

madadhd said:
Thanks buddy for the reply. I'm used to using a custom ROM on my Android phones so this is new. Mostly CyanogenMod.
That's good to know I don't need to flash in order to get the bands but I understand I need to if I want OTA updates from at&t. It seems relatively simple that you just flash the AT&T ROM over the T-Mobile with Odin and then use some update file. It doesn't even effect Samsung pay and Knox which is great.
Stupid question: is the AT&T modem included with the AT&T rom? Also, with regards to the 2nd link in the OP what is the update file that you put on the sdcard to use in recovery - is that an OTA update because your ROM is different from your carrier?
Click to expand...
Click to collapse
The following is the latest G930A Android 7.0 firmware file. All you need to do is flash it with Odin's AP slot to completely convert your G930T to a G930A. No other steps or files are required: G930AUCS4BQC2_CL10280464_QB12904132_REV02_user_low_ship_MULTI_CERT_meta.tar.rar
EDIT: Corrected the linked file

muniz_ri said:
The following is the latest G930A Android 7.0 firmware file. All you need to do is flash it with Odin's AP slot to completely convert your G930T to a G930A. No other steps or files are required: G930AUCS4BQC2_CL10280464_QB12904132_REV02_user_low_ship_MULTI_CERT_meta.tar.rar
EDIT: Corrected the linked file
Click to expand...
Click to collapse
i have METROPCS Phone SM-G930T1 Nougat, already unlocked since i live in mexico...is there a international rom to flash?? i wanna convert my s7 to a non carrier rom IN ADVANCE THANKS 4 YOUR HELP!

muniz_ri said:
The following is the latest G930A Android 7.0 firmware file. All you need to do is flash it with Odin's AP slot to completely convert your G930T to a G930A. No other steps or files are required: G930AUCS4BQC2_CL10280464_QB12904132_REV02_user_low_ship_MULTI_CERT_meta.tar.rar
EDIT: Corrected the linked file
Click to expand...
Click to collapse
I don't get why you would do this other than to have ATT bloat over TMO bloat (IMHO TMO has less bloat than ATT). There's no technical advantage. Am I missing something?

A0425A said:
I don't get why you would do this other than to have ATT bloat over TMO bloat (IMHO TMO has less bloat than ATT). There's no technical advantage. Am I missing something?
Click to expand...
Click to collapse
The amount of bloatware is irrelevant since you can freeze all bloatware on either build. I experienced many issues on the TMo version including issues with Android Auto, Google Assistant, and Tasker. I thought these apps were buggy but all of those issues were resolved on the AT&T version. The AT&T version seems to be a better, bug-free build.

muniz_ri said:
The amount of bloatware is irrelevant since you can freeze all bloatware on either build. I experienced many issues on the TMo version including issues with Android Auto, Google Assistant, and Tasker. I thought these apps were buggy but all of those issues were resolved on the AT&T version. The AT&T version seems to be a better, bug-free build.
Click to expand...
Click to collapse
Read that in a different thread you posted to after I responded. I think it's very YMMV though. But if you saw improvement then ??

Hi, did anyone ever complete this flash from SM-G930T to SM-G930A? I'd like to do this solely to try and get the wifi calling feature since my workplace has poor cell service but great wifi. I bought the T-Mobile phone, unlocked it, put the ATT sim in and everything but wifi calling works fine. I appreciate the reply!

This is much later in the year (11-8-2021) and ATT has posted the list of phone they say will work and it only shows G930A. It seems their test of working means it must have been sold by ATT. They say My G930T won't work. So Will ATT continue to use customer's unlocked phones it they were not orginally sold by ATT. They have the records. Will ATT refuse to use one of their SIMs even if the phone is Flashed to ATT logo. I do not want to throw away my G930T phone.

muniz_ri said:
The following is the latest G930A Android 7.0 firmware file. All you need to do is flash it with Odin's AP slot to completely convert your G930T to a G930A. No other steps or files are required: G930AUCS4BQC2_CL10280464_QB12904132_REV02_user_low_ship_MULTI_CERT_meta.tar.rar
EDIT: Corrected the linked file
Click to expand...
Click to collapse
Hello and thank you. You posted this information and link back in 2017 and so much has changed. Mostly ATT is now working hard to get rid of all 3G towers and firing up 5G. They said my Galaxy S7-GM930T would not work so I think they link you posted will help me convert the phone back to a GM930A or U or U1. My question is,..Has anything in your post changed since 2017 and if so could you please advise me of what I need to do. Thanks very much.

trigger1937 said:
Hello and thank you. You posted this information and link back in 2017 and so much has changed. Mostly ATT is now working hard to get rid of all 3G towers and firing up 5G. They said my Galaxy S7-GM930T would not work so I think they link you posted will help me convert the phone back to a GM930A or U or U1. My question is,..Has anything in your post changed since 2017 and if so could you please advise me of what I need to do. Thanks very much.
Click to expand...
Click to collapse
They sent you a message saying the phone won't work?

[FIRMWARE] G950U1 Unlocked AT&T QK2

As of this writing (11/29/2017) this is the latest firmware for the G950U1 att unlocked S8 . I'm leaving this here for reference so people can return to it if/when they need it.
Download, extract, remove .md5 file name off the end of each file, flash.
G950U1UEU2AQK2 (This WILL update your bootloader so after this, no going to QH3 or before. Not that you'd have a reason to)
https://drive.google.com/open?id=1gvQ0kaZTwbEYe2jvuIa05pCvwkS4ddtg

joe3681 said:
As of this writing (11/29/2017) this is the latest firmware for the G950U1 att unlocked S8 . I'm leaving this here for reference so people can return to it if/when they need it.
Download, extract, remove .md5 file name off the end of each file, flash.
G950U1UEU2AQK2 (This WILL update your bootloader so after this, no going to QH3 or before. Not that you'd have a reason to)
https://drive.google.com/open?id=1gvQ0kaZTwbEYe2jvuIa05pCvwkS4ddtg
Click to expand...
Click to collapse
you donnt need to remove the .md5
you will need modded odin though.

mweinbach said:
you donnt need to remove the .md5
you will need modded odin though.
Click to expand...
Click to collapse
You don't need to no, but it speeds up the process. I'm just posting firmware not making a hand holding tutorial. There's enough of those around

Thanks Joe I was tired of returning all the way back to the beginning and getting all those new updates on my unlocked S8

joe3681 said:
You don't need to no, but it speeds up the process. I'm just posting firmware not making a hand holding tutorial. There's enough of those around
Click to expand...
Click to collapse
Yeah and on a Mac you do need to, or it freezes Odin completely

If I flash unbranded FW on a carrier specific device, loke tmo or att for example, would it sim unlock the phone?
If I flash tmo FW on an att s8 would it in turn allow me to use the att original device on tmo? I ask these questions because I feel like it would work for both my questions since flashing the FW flashes both boot, kernel and baseband/radio. The which is needed for signal. Just some theories but would love to know the answers.
Btw, I have a F model S8+ and was planning on buying some US branded devices so I was curious.

this.guy.lol said:
If I flash unbranded FW on a carrier specific device, loke tmo or att for example, would it sim unlock the phone?
If I flash tmo FW on an att s8 would it in turn allow me to use the att original device on tmo? I ask these questions because I feel like it would work for both my questions since flashing the FW flashes both boot, kernel and baseband/radio. The which is needed for signal. Just some theories but would love to know the answers.
Btw, I have a F model S8+ and was planning on buying some US branded devices so I was curious.
Click to expand...
Click to collapse
No, it will not unlock the phone (Note: Verizon phones are factory unlocked and remain that way after a firmware flash)
Yes, you can flash any carriers FW to a US S8 and use it with a different carrier.

So I understand, your saying if I flash att FW to a T-Mobile s8 I can use it on tmobile? If that is the case, to me that's an unlock of sorts tiny book lol. Just wanna make sure is all

Deleted

this.guy.lol said:
So I understand, your saying if I flash att FW to a T-Mobile s8 I can use it on tmobile? If that is the case, to me that's an unlock of sorts tiny book lol. Just wanna make sure is all
Click to expand...
Click to collapse
You can flash att firmware and use it on TMobile but it will still be locked to TMobile. Just running att firmware.

joe3681 said:
You can flash att firmware and use it on TMobile but it will still be locked to TMobile. Just running att firmware.
Click to expand...
Click to collapse
Just realized the typo.....what I meant was, if I flash ATT on a TMO variant I can use ATT while locked to tmo? I'm very unfimiar with combination fw and always opted for the UK models for alot of reasons. Sorry for the confusion of my op question. I know on the s7 and edge if you flashed the US unlocked firmware it not only removed AOL bloat but it unlocked the device. So that is why I ask.

this.guy.lol said:
Just realized the typo.....what I meant was, if I flash ATT on a TMO variant I can use ATT while locked to tmo? I'm very unfimiar with combination fw and always opted for the UK models for alot of reasons. Sorry for the confusion of my op question. I know on the s7 and edge if you flashed the US unlocked firmware it not only removed AOL bloat but it unlocked the device. So that is why I ask.
Click to expand...
Click to collapse
I had a TMobile S7 edge and flashing unlocked firmware never unlocked the device. That's handled by TMobile servers so...
Flashing unlocked firmware will give you just that. The smoother, bloat free firmware from another device but not the actual sim unlock.

I bought an unlocked device and wanted wifi calling so I flashed the g950usqs1aqf7 att firmware with Odin and it worked to enable wifi calling but I'm unable to get any ota updates and I hate the bloat. Is it possible to get WiFi calling with an unlocked firmware like this one? Also what is the difference between the U and U1 firmware variants?

maquino1985 said:
I bought an unlocked device and wanted wifi calling so I flashed the g950usqs1aqf7 att firmware with Odin and it worked to enable wifi calling but I'm unable to get any ota updates and I hate the bloat. Is it possible to get WiFi calling with an unlocked firmware like this one? Also what is the difference between the U and U1 firmware variants?
Click to expand...
Click to collapse
There are plenty of threads on this, but I don't think anyone was ever successful. I flashed att Oreo to my u1 and got the options, but can't get my company to change my imei back.... My personal phone sim works fine. Quit at that point since it's an Ims registration error. You can try merging the wifi calling apks, but I'm pretty sure it's baked pretty deep in the os. The Verizon guys got some of it working. You can try their threads and see if any of it applies to us.

twizt3d said:
There are plenty of threads on this, but I don't think anyone was ever successful. I flashed att Oreo to my u1 and got the options, but can't get my company to change my imei back.... My personal phone sim works fine. Quit at that point since it's an Ims registration error. You can try merging the wifi calling apks, but I'm pretty sure it's baked pretty deep in the os. The Verizon guys got some of it working. You can try their threads and see if any of it applies to us.
Click to expand...
Click to collapse
Thanks. Some threads made it sound possible but inconclusive. I'll just assume it doesn't work.
BTW, can you link to the att oreo fw? And what do u flash that with Odin or comsey?

The thread right below this one entitled Oreo ota has all the details and it needs to be side loaded through adb. Not Odin. But you will need to Odin the 950u base to get off u1

twizt3d said:
The thread right below this one entitled Oreo ota has all the details and it needs to be side loaded through adb. Not Odin. But you will need to Odin the 950u base to get off u1
Click to expand...
Click to collapse
Ok thanks. I need to flash anyways because I'm having terrible battery issues and just debating whether to go to a newer version of 950u or back to U1 and losing WiFi calling. In your opinion is oreo beta worth it

So just to confirm, I have read everything, but I am just a bit confused. If I flashed the unlocked firmware via modified odin on a locked AT&T S8 it will remove a lot of the carrier bloat and give my my wifi hotspot back, but remove wifi calling. Similar to when I flashed the T-Mobile firmware on my AT&T S7 and got rid of a ton of the AT&T bloatware but was able to activate my wifi hotspot but lost wifi calling. I stay locked to AT&T which is fine that is not my purpose for flashing
---------- Post added at 07:03 AM ---------- Previous post was at 07:01 AM ----------
and can you re-upload the link is dead now

The links don't work. Any chance you've still got the firmware? I've been overseas since october. I have an unlocked AT&T phone that I intend to keep using when I get back, so I want to keep it AT&T FW.

Hi.
I have a G955U Galaxy S8+ AT&T Factory Unlocked on Android 7.0
Baseband Version: G955USQU1AQD9
Android Security Patch Level - April 1, 2017
I no longer live in the US, and currently in the Philippines. Phone works great and the signal is too and all, but I cannot get OTA updates.
Can I just download the firmware file in this thread and flash straight through ODIN, or do I need to follow another guide?

General G996U and G996U1 Firmware Links and Flashing Discussion Here

For those who aren't already aware, G996U is the model number of all of the US carrier versions of the S21+. The G996U1 is the model number of the same device, but sold by Samsung SIM unlocked and with no carrier bloatware. Firmware is 100% interchangeable among these models: any U or U1 firmware version can be flashed to any U or U1 device at any time, assuming that you're not trying to downgrade the bootloader. A "U to U" or "U1 to U1" flash does not require a factory reset, but changing from one firmware to the other will require one. Also, U firmware is identical for the 4 base files (AP, BL, CP, CSC) for each individual build, no matter which carrier it comes from. So if you download 2 different carrier versions of the exact same build, the 4 base files will be identical. Where the firmware differs is in the USERDATA file - that's where the carrier bloatware and customizations reside.
Manual Odin flashing is designed for those who:
- want to manually update to a newer version of U firmware on their U device, either because they don't want to wait for their carrier's OTA or because OTAs aren't working on their device, or a different carrier got a new feature/patch before they did
- want to flash U1 firmware to their U device
- want to convert from U1 firmware to carrier U firmware
- want to convert from one carrier's U firmware (with all apps and bloatware) to a different carrier's U firmware (with all apps and bloatware)
For those who aren't already aware, anyone can now download firmware for almost any Samsung device any time that they want, via the various firmware download tools posted here on XDA like SamFirm or Frija. There are threads and info about them here on XDA so I won't waste time explaining - do a search if you're not already familiar with these tools. But they only provide whatever the latest/newest/current version is - nothing older. I pay for a subscription to a site that gets the official releases (usually) before they hit the firmware download tools, so that's where my files come from.
This is not a "beginner's guide to Odin flashing" -type post/thread, so I won't list basic, step-by-step flashing instructions. My threads are geared towards those who already know what they're doing. If you're new to manually flashing Samsung firmware (or haven't done it in a long time), I recommend you consult one of those "beginner's" guides- there are tons of them here on XDA.
Happy flashing!
U firmware: https://www.androidfilehost.com/?w=files&flid=322091
U1 firmware: https://www.androidfilehost.com/?w=files&flid=322092
Notes:
- DON'T QUOTE THE OP WHEN YOU REPLY, kthx
- I have lots of threads just like this one for other Samsung flagships, if it interests you. For those who have already made use of my previous threads for a different device and are upgrading to an S21, welcome back
- My zips are compressed extra small for space and bandwidth savings. The default Windows extractor can't handle it, so you'll need a 3rd party tool like 7zip, WinRAR, etc
- it's quite time consuming to download the files, zip them up, and upload them to AFH. And, I do threads like this for every single Sx and Note x model, so I won't be uploading every single version. The only full builds that I upload are ones where I get access to a new bootloader and/or Android version early, before they hit the firmware download tools.
- My naming method for folders on AFH is: build - bootloader - Android version
So "SAT - 1 - 9.0" means the full build number ends in SAT, it's bootloader version 1, and it's Android 9.0. When bootloader and Android versions increment, the first build to have those changes will have its folder notated appropriately.
- HOME CSC file keeps data intact; using the other CSC will wipe data. Flashing USERDATA will also wipe data.
- Since AT&T doesn't allow their firmware to be publicly available (for any of their devices), I'll try to always upload at least one USERDATA per bootloader increment for AT&T (and Cricket, if they get this model). I'll also upload any full builds if AT&T is the only carrier to get that specific build, because you won't be able to find the files anywhere else.
- For identifying USERDATAS, and to know what region/CSC to use in the firmware download tools if you're downloading yourself:
AIO = Cricket (not available via firmware download tools)
ATT = AT&T (not available via firmware download tools)
BST = Boost Mobile
CCT = Xfinity Mobile (Comcast)
CHA = Spectrum Mobile (Charter)
DSH = Dish Network
SPR = Sprint
TMB = T-Mobile
TMK = Metro PCS
USC = US Cellular
VZW = Verizon (available via firmware download tools, but Manual Entry is required - Auto will not work)
XAA = U1 firmware
- the correct procedure for switching from one carrier's firmware to another is:
1. Flash full U1 firmware package including non HOME CSC
2. Upon boot, insert a SIM of the carrier whose firmware you want
3. Watch for the popup that says "reboot to apply new carrier settings" etc, and do it
4. After that restart completes, reboot back to Download mode and flash the full U firmware package, with the USERDATA file of the carrier whose firmware you want

Initial U firmware and AT&T USERDATA are posted, along with U1 firmware. U firmware is not yet accessible in the firmware download tools like SamFirm and Frija, but if anyone wants a different carrier's USERDATA (for flashing bloatware to a U1 device or for converting a U device from one carrier's bloatware to a different one), let me know and I'll get it for you

Are the firmware in OP compatible for the S21 (Non-plus)?

craznazn said:
Are the firmware in OP compatible for the S21 (Non-plus)?
Click to expand...
Click to collapse
This thread is in the S21+ forum, not the S21 forum.
This thread is for model numbers G996U and G996U1, not G991U or G991U1.
If you're looking for S21 firmware, that will be found in the S21 forum

I agree with you

Does the firmware control the SIM lock? So, can you flash the U1-XAA firmware and use say a phone purchased from AT&T on another carrier? Or do you need to do the SIM unlock before flashing?

3BeersKen said:
Does the firmware control the SIM lock? So, can you flash the U1-XAA firmware and use say a phone purchased from AT&T on another carrier? Or do you need to do the SIM unlock before flashing?
Click to expand...
Click to collapse
SIM unlock always goes much deeper than firmware. Flashing U1 will never automatically unlock any model - the unlock has to be done separately. If desired, I can provide a recommendation for a professional 3rd party business to do the unlocking, for any interested users who may not meet the carrier's unlock requirement(s).

Thanks. That's what I figured, but wanted to make sure. I like to get off of the AT&T firmware as quickly as possible as you can't get their updates unless you have an active SIM in the phone.

3BeersKen said:
You can't get their updates unless you have an active SIM in the phone.
Click to expand...
Click to collapse
Correct. They're A-holes like that haha

iBowToAndroid said:
Correct. They're A-holes like that haha
Click to expand...
Click to collapse
I got TMobile s21+ and want flash to u1,do you know which odin should I use, thanks

yijinsa said:
I got TMobile s21+ and want flash to u1,do you know which odin should I use, thanks
Click to expand...
Click to collapse
3.14.1 patched

I don't have my S21+ yet but it will be here soon. I ordered from Samsung and selected the Verizon version as unlocked was considerably more expensive.
Does anyone know what Verizon specific bloatware the S21+ has?
Are there certain apps which can be uninstalled with the U1 version but not the Verizon U version?
Are there any potential speed benefits on the 5G network that would be lost using the U1 version, or features like tethering that won't work?
For updates in the future, would they arrive faster on the U1 version, slower, or the same?
My main purpose in flashing from U to U1 is to free up the maximum amount of space of the 128 GB while still retaining 100% of the speed and features I would have with the Verizon version.
Thank you for educating me! It's been a couple years since I flashed my Note 8.

I order a unlocked S21+ U1 version straight from Samsung and didn't have to put in any VZW info.
There is a buttload of Samsung bloatware but no VZW except fot MyVZX

Have anyone here with T-mobile version stuck on TMB/TMB/TMB after going to U1 firmware?
Someone over S21 Ultra have this problem, but I'm not sure if Android 11 tinker or T-mobile side. Used to be XAA/XAA/TMB

x1tymez said:
Have anyone here with T-mobile version stuck on TMB/TMB/TMB after going to U1 firmware?
Someone over S21 Ultra have this problem, but I'm not sure if Android 11 tinker or T-mobile side. Used to be XAA/XAA/TMB
Click to expand...
Click to collapse
Yes, that seems to be a common issue with T-Mobile S21s - all 3 models

iBowToAndroid said:
Yes, that seems to be a common issue with T-Mobile S21s - all 3 models
Click to expand...
Click to collapse
You think there will be a fix for this? It's weird that dialer codes also don't work.

x1tymez said:
Have anyone here with T-mobile version stuck on TMB/TMB/TMB after going to U1 firmware?
Someone over S21 Ultra have this problem, but I'm not sure if Android 11 tinker or T-mobile side. Used to be XAA/XAA/TMB
Click to expand...
Click to collapse
I've got a T-Mobile locked that I was able to get flashed over to U1 without much trouble. Shows mode number SM-G996U1 now, build number shows same.
edit: Nevermind, I see the TMB/TMB/TMB

krisology said:
You think there will be a fix for this? It's weird that dialer codes also don't work.
Click to expand...
Click to collapse
Dialer codes don't work? On which firmware?

iBowToAndroid said:
Dialer codes don't work? On which firmware?
Click to expand...
Click to collapse
XAA U1, VZW U1, stock TMB U, and I've tried the TLI U1 above and couldn't get it to work. Using google dialer, I input the codes like *#*#27262826#*#* and as soon as I type the last star it just disappears and nothing pops up. I tried with T-Mobile and Verizon sim.

krisology said:
XAA U1, VZW U1, stock TMB U, and I've tried the TLI U1 above and couldn't get it to work. Using google dialer, I input the codes like *#*#27262826#*#* and as soon as I type the last star it just disappears and nothing pops up. I tried with T-Mobile and Verizon sim.
Click to expand...
Click to collapse
Dialer codes usually don't work on VZW firmware, whether U or U1. But they almost always work on TMB and all others.
Have you tried *#06# ?

(HELP)SM-N986U1 change CSC to TMB - Enable ESIm

Hey Everyone,
I have unlocked SM-N986U1 with the latest update installed (Updated with latest June update). I wanted to change my CSC to TMB (T-Mobile) so as to enable ESeim support. I tried using Samkey, wasted 1 credit too. It said CSC updated but nothing happened, my carrier still shows XAA.
Can anyone please guide me on how can I change CSC to TMB?
Thanks.

dawinner said:
Hey Everyone,
I have unlocked SM-N986U1 with the latest update installed (Updated with latest June update). I wanted to change my CSC to TMB (T-Mobile) so as to enable ESeim support. I tried using Samkey, wasted 1 credit too. It said CSC updated but nothing happened, my carrier still shows XAA.
Can anyone please guide me on how can I change CSC to TMB?
Thanks.
Click to expand...
Click to collapse
These links'could help. I think you have to flash the TMB Rom which enables and support the eSim on the phone. It would help to have a Tmobile Sim around during this process but I have heard others say it is not needed.
Note 20 Ultra eSIM update is here!! (T-mobile USA)
Guys, FINALLY!!! Woohoo! We have eSIM support on Note 20 Ultra US Snapdragon version for T-mobile. There is an OTA you can download and then convert your physical SIM to eSIM :)
forum.xda-developers.com
[Guide] - eSim Firmware Flash/ Odin Upgrade/ Flashing and N986U to N986U1 & Vice Versa
Instructions are updated to get eSIM INTRODUCTION - Firstly sorry for posting this as this is common knowledge for many. I still see so many people asking the same questions again and again and i do want to help so decided to write a guide. If...
forum.xda-developers.com

Mbetu said:
These links'could help. I think you have to flash the TMB Rom which enables and support the eSim on the phone. It would help to have a Tmobile Sim around during this process but I have heard others say it is not needed.
Note 20 Ultra eSIM update is here!! (T-mobile USA)
Guys, FINALLY!!! Woohoo! We have eSIM support on Note 20 Ultra US Snapdragon version for T-mobile. There is an OTA you can download and then convert your physical SIM to eSIM :)
forum.xda-developers.com
[Guide] - eSim Firmware Flash/ Odin Upgrade/ Flashing and N986U to N986U1 & Vice Versa
Instructions are updated to get eSIM INTRODUCTION - Firstly sorry for posting this as this is common knowledge for many. I still see so many people asking the same questions again and again and i do want to help so decided to write a guide. If...
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks for the link to guide. I was going through it and there is a warning on the top saying if you have Bootloader 2 you won't be able to flash U firmware on U1. I believe as I have all the latest updates I wont be be able to flash it.
Thanks for your help.

dawinner said:
Thanks for the link to guide. I was going through it and there is a warning on the top saying if you have Bootloader 2 you won't be able to flash U firmware on U1. I believe as I have all the latest updates I wont be be able to flash it.
Thanks for your help.
Click to expand...
Click to collapse
Yes you can. My device is from Xfinity and I have done the switch to any Carrier I choose on bootloader 2. U1 to U and back is doable. The key is to use the modified Odin as specified in the guide.
"
2. Download Patched Odin here
3. Unpack/Unzip what you downloaded in Step 2 (Odin Compatible ROm) and put in a folder. Lets call the folder "Flash"
4. Run Odin, click on BL, Browse to the "Flash" folder, add BL file from there, Do the same for AP (click on AP, Add AP file, this will take some time), Same for CP (click on CP, Add CP file)
5. Do the same for CSC (click on CSC, Add the file with the name starting with Home_CSC). If you use Home_CSC your phone will not get formatted and data will remain Intact
USERDATA Stays empty.
6. Now connect USB cable to your laptop (Only laptop and not the phone)>> Turn off your phone >> Press volume up and volume down keep them pressed and plug in the USB type C into your phone.
7. You should be in download mode now, press volume up. In Odin you will see that phone is added.
8. Press start in Odin. Wait for it to finish and let the phone restart (it will happen On its own).
9. Done

Mbetu said:
Yes you can. My device is from Xfinity and I have done the switch to any Carrier I choose on bootloader 2. U1 to U and back is doable. The key is to use the modified Odin as specified in the guide.
"
2. Download Patched Odin here
3. Unpack/Unzip what you downloaded in Step 2 (Odin Compatible ROm) and put in a folder. Lets call the folder "Flash"
4. Run Odin, click on BL, Browse to the "Flash" folder, add BL file from there, Do the same for AP (click on AP, Add AP file, this will take some time), Same for CP (click on CP, Add CP file)
5. Do the same for CSC (click on CSC, Add the file with the name starting with Home_CSC). If you use Home_CSC your phone will not get formatted and data will remain Intact
USERDATA Stays empty.
6. Now connect USB cable to your laptop (Only laptop and not the phone)>> Turn off your phone >> Press volume up and volume down keep them pressed and plug in the USB type C into your phone.
7. You should be in download mode now, press volume up. In Odin you will see that phone is added.
8. Press start in Odin. Wait for it to finish and let the phone restart (it will happen On its own).
9. Done
Click to expand...
Click to collapse
Thanks for the steps. Couple of Quick Questions:
1) I used frija to download the firmware (I typed CSC: TMB in frija, as its the first time I am using it, is it the right way)
2) I also checked the version in frija with the CSC: XAA, the version is same. How can I make sure that I have downloaded the correct TMB firmware.
Thanks.

dawinner said:
Thanks for the steps. Couple of Quick Questions:
1) I used frija to download the firmware (I typed CSC: TMB in frija, as its the first time I am using it, is it the right way)
2) I also checked the version in frija with the CSC: XAA, the version is same. How can I make sure that I have downloaded the correct TMB firmware.
Thanks.
Click to expand...
Click to collapse
You might want to extract the files and check for differences. The Frija tool has been kind of good to me.

Mbetu said:
You might want to extract the files and check for differences. The Frija tool has been kind of good to me.
Click to expand...
Click to collapse
Thanks for all the help, one last question, and I dont know if you will know about this:
To enable ESIM (Only T-Mobile version has E-SIM), do I need to flash U version of T-Mobile of U1 version of T-Mobile will also provide me with the same ESIM functionality?

dawinner said:
Thanks for all the help, one last question, and I dont know if you will know about this:
To enable ESIM (Only T-Mobile version has E-SIM), do I need to flash U version of T-Mobile of U1 version of T-Mobile will also provide me with the same ESIM functionality?
Click to expand...
Click to collapse
I think I flashed the U version of Tmobile but it does not hurt to try both. This is what my device info says after converting my Xfiniti to Tmobile

Mbetu said:
I think I flashed the U version of Tmobile but it does not hurt to try both. This is what my device info says after converting my Xfiniti to Tmobile
Click to expand...
Click to collapse
Thanks!!!!

Mbetu said:
I think I flashed the U version of Tmobile but it does not hurt to try both. This is what my device info says after converting my Xfiniti to Tmobile
Click to expand...
Click to collapse
I flashed the complete U firmware except the USER DATA file. But my Service Provider Software version is still stuck at XAA, its not changing to TMB. Though the phone model has changed to what you have in your screenshot.
Any idea what to do?

dawinner said:
I flashed the complete U firmware except the USER DATA file. But my Service Provider Software version is still stuck at XAA, its not changing to TMB. Though the phone model has changed to what you have in your screenshot.
Any idea what to do?
Click to expand...
Click to collapse
So the Model is 986U/DS ? And is eSim enabled ?. That is the state you would want to be in. I understand the last XXX in the service provider software can't be changed. Mine didn't change and stayed CCT which is for xfinity but the as you can see, I have TMB/TMB, TMB/CCT. Esim is enabled and my Mint mobile (Tmobile) number is on it and I have a foreign physical Sim which is roaming on AT&T on the physical slot.
You might be close.

Mbetu said:
So the Model is 986U/DS ? And is eSim enabled ?. That is the state you would want to be in. I understand the last XXX in the service provider software can't be changed. Mine didn't change and stayed CCT which is for xfinity but the as you can see, I have TMB/TMB, TMB/CCT. Esim is enabled and my Mint mobile (Tmobile) number is on it and I have a foreign physical Sim which is roaming on AT&T on the physical slot.
You might be close.
Click to expand...
Click to collapse
Also picked this nugget up from another thread
"You have to flash full tmb firmware. Not xaa tmb but 986u tmb firmware. The esim is in the user data section you'll flash"
Others have suggested you have to do a factory reset or flash the actual CSC file not the Home CSC which means you will loose DATA. I was doing this on a phone I had not setup yet so didn't mind loosing DATA. I am also assuming you have a TMB sim card in the phone because I understand that is needed so the phone can connect to Tmobile and download the carrier data files that actually changes the CSC after a clean flash.
These are just some of the things I picked up from here when doing my conversion.

Mbetu said:
Also picked this nugget up from another thread
"You have to flash full tmb firmware. Not xaa tmb but 986u tmb firmware. The esim is in the user data section you'll flash"
Others have suggested you have to do a factory reset or flash the actual CSC file not the Home CSC which means you will loose DATA. I was doing this on a phone I had not setup yet so didn't mind loosing DATA. I am also assuming you have a TMB sim card in the phone because I understand that is needed so the phone can connect to Tmobile and download the carrier data files that actually changes the CSC after a clean flash.
These are just some of the things I picked up from here when doing my conversion.
Click to expand...
Click to collapse
Yup I used the TMB version only. The model Number changed to 986U/DS. In About phone, it shows me the IMEI of the Esim, but its greyed out.
The only thing I dont have is the T-Mobile Sim. I think thats whats causing the issue. I will arrange a t-Mobile sim and try it tomorrow.
Thanks for all the help.

Mbetu said:
Also picked this nugget up from another thread
"You have to flash full tmb firmware. Not xaa tmb but 986u tmb firmware. The esim is in the user data section you'll flash"
Others have suggested you have to do a factory reset or flash the actual CSC file not the Home CSC which means you will loose DATA. I was doing this on a phone I had not setup yet so didn't mind loosing DATA. I am also assuming you have a TMB sim card in the phone because I understand that is needed so the phone can connect to Tmobile and download the carrier data files that actually changes the CSC after a clean flash.
These are just some of the things I picked up from here when doing my conversion.
Click to expand...
Click to collapse
QQ: Does it has to be a T-Mobile Sim? or Mint mobile or anyother T-Mobile based MVNO should work?

dawinner said:
QQ: Does it has to be a T-Mobile Sim? or Mint mobile or anyother T-Mobile based MVNO should work?
Click to expand...
Click to collapse
Has to be a Tmobile Sim. I tried a Mint Sim it didn't work. If you are seeing the esim but greyed out, then you are close. Restart with a Tmobile Sim and you might be in business

Mbetu said:
Has to be a Tmobile Sim. I tried a Mint Sim it didn't work. If you are seeing the esim but greyed out, then you are close. Restart with a Tmobile Sim and you might be in business
Click to expand...
Click to collapse
Thanks that helps. I just have to figure a way to get a tmobile sim. I dont have it. Lol. Will try again once I get my hands on a Tmobile sim.
Thanks for the help.

dawinner said:
Thanks that helps. I just have to figure a way to get a tmobile sim. I dont have it. Lol. Will try again once I get my hands on a Tmobile sim.
Thanks for the help.
Click to expand...
Click to collapse
Anytime. FYI, dois not have to be an active TMB sim. Used ones are on ebay for about 2 bucks.

Mbetu said:
Anytime. FYI, dois not have to be an active TMB sim. Used ones are on ebay for about 2 bucks.
Click to expand...
Click to collapse
Thanks. Let me try those.

Since the OP looks like problem solved, and not wanting to waste new thread, i have similar issues, can you help?
I have an S10e I recently broke (amazon renewed w/U1 FW), so I got another S10e from amazon, renewed which appears to also be U1 FW.
Except the latest, the replacement phone, the one I have now, NOONE can hear me, like all the time!!!!!!! Dead spots everywhere! Its so annoying. Its like i have a bad Mic? Or something...
This didn't happen with my identical phone, the one I had prior to this one, using identical sim.
I'm on Mint mobile, which is a TMO MVNO and currently have XAA/XAG FW running on the new S10e, the new one w/bad Mic or FW problem
It appears I am on U1 Unlocked USA firmware on latest phone ( i may have flashed FW Odin when I got this new one-to be safe- i forgot)
ALSO: BOTH renewed S10e's I've Purchased from Amazon, when lookup the IMEI, it shows as the AT&T Model. Which i understand the U/U1 FW can be swapped, BUT, both phones were advertised as U1 Models for the Hardware, so they sold me U models but they flashed with U1 FW probably to make more money. (this may seem trivial, but Samsung specifically has stated TWICE, that I couldn't Beta Test their last to major android FW's, because my phone shows as At&t on their end, and not the truly unlocked U1 model, for which the beta tests were for. And i was told when i purchased it was fully unlocked U1 ver. The phone itself even says its 970u1 in settings etc.)
Are there ANY hardware (including frequency bands) differences between U and U1 Models???
Is it somehow possible that my CSC, or FW on my phone is affecting my phone so badly that people cant hear me like 88% of all calls? Like should i flash different FW, or reflash or use different CSC??
Is it possible that if I went with a locked TMO FW (or another) that I could possibly, maybe get better reception so folks can hear me better? Or hear me more often or more frequently?
How often do mics go bad or get dirty on these? Can a mic be cleaned?

I have been in the other Note 20 flashing thread but I am stuck. Tried so many ways but can't get the TMB csc to stick, always shows only XAA. I have TMO sim card too. Not sure if they blocked it on the newer releases of the phone
Has anyone tried Samkey to do this? Heard it only takes 1 credit but smallest amount of credits to purchase on ebay is 10 and I dont feel like investing more money into this effort

Question Help - In need of T-mobile unlock app

Hi.
In short I am asking someone who was the T-mobile firmware if they can extract the T-mobile unlock app. I am hoping I can use the unlock app without the need to reflash my phone to the T-mobile firmware.
Long story.
I thought my wife's phone was unlocked succesfully and flashed the unlocked firmware over the T-mobile firmware. Weeks later come to find out it's not actually unlocked we were just using a MVNO that is on T-mobile antenna... which I should have known. Really want to avoid making my wife setup a bunch of stuff again, even after backing up and restoring so looking for some help.
Is anyone able to extract the unlock app, or have a better way of backing up and restoring without the need for root?
TIA

just make Okey gooogle bro,
Device Unlock 1.2.33 (arm) APK Download by T-Mobile USA - APKMirror
Device Unlock 1.2.33 (arm) APK Download by T-Mobile USA - APKMirror Free and safe Android APK downloads
www.apkmirror.com

malikin said:
just make Okey gooogle bro,
Device Unlock 1.2.33 (arm) APK Download by T-Mobile USA - APKMirror
Device Unlock 1.2.33 (arm) APK Download by T-Mobile USA - APKMirror Free and safe Android APK downloads
www.apkmirror.com
Click to expand...
Click to collapse
Thanks for the response, but installing all the ones I found online say that my device is incompatible.
Which makes sense, the ones online are all ancient.
I.E "Target: Android 7.0"

moku160 said:
Thanks for the response, but installing all the ones I found online say that my device is incompatible.
Which makes sense, the ones online are all ancient.
I.E "Target: Android 7.0"
Click to expand...
Click to collapse
What message are you receiving when you insert Non TMobile or MVNO sim?
AFAIK, you will need TMobile firmware for unlock to work. Newer TMobile phones don't have a dedicated unlock app. It is baked in connection settings.

dadmi said:
What message are you receiving when you insert Non TMobile or MVNO sim?
AFAIK, you will need TMobile firmware for unlock to work. Newer TMobile phones don't have a dedicated unlock app. It is baked in connection settings.
Click to expand...
Click to collapse
Was afraid of that. It asks for an unlock code. Will probably have to just bite the bullet and flash back to the TMobile firmware.
Maybe flashing with Home_CSC will work and still allow me to keep my wifes settings intact.

moku160 said:
Was afraid of that. It asks for an unlock code. Will probably have to just bite the bullet and flash back to the TMobile firmware.
Maybe flashing with Home_CSC will work and still allow me to keep my wifes settings intact.
Click to expand...
Click to collapse
Worth giving a shot with Home_CSC. Also Samsung backup works very well except Samsung Pay/Google Pay which you have to set again.

dadmi said:
Worth giving a shot with Home_CSC. Also Samsung backup works very well except Samsung Pay/Google Pay which you have to set again.
Click to expand...
Click to collapse
Ill probably try it tonight. As far as Samsung backup, did you mean smart switch? All the apps, contacts, photos come over but many apps still require setting up again Regardless thanks for the comments!

New T-Mobile devices don't use the unlock app anymore. Device unlock requests are done through connection settings.

Ended up flashing back to T-mobile firmware using Home_CSC instead of CSC and I was able to successfully unlock as well as keep my wifes settings...
But i tried flashing back to unlocked firmware using Home_CSC and couldn't boot. Said user data was corrupt. I tried 4 times without any difference. Luckily I was able to flash back to T-mobile firmware again with Home_CSC and it worked fine
This may be common knowledge I wasnt aware of but it appears:
Unlocked firmware + Home_CSC -> Carrier Firmware is ok
BUT carrier firmware + Home_CSC -> Unlocked Firmware is not
Thanks to anyone to commented and read.

It's contract there I believe