Related
I bought a chinese phone Telsda/TSD A198 . The firmware reports it as an MT6589 CPU but the computer reports it as a spreadtrum phone. I need to root the phone to get rid of some apps on this to make space. Also without rooting is there anyway to backup the stock rom on my phone before I mess up to root? I have seen a method on XDA but that requires root. Now I am trying to backup to get to rooot !!!! Also I have also researched researchdownload but without a ROM backup and not knowing which CPU model to flash its impossible to it right. I also looked into mtkdroidtools and it tells me "unstructured rom backup not possible" , so I am guessing its a fake MTK CPU that is being reported by tweaking the firmware.
This is the link to the phone
http://www.aliexpress.com/item/New-...3-MTK6589-4-0-INCH-smart-phone/879312434.html
Any help is appreciated.
Thanks
I also interesting for this phone, but I have some doubt about the specs of this item. If you could clear some important properties for me, such as:
Does it have GPS functionality?
If not, this indirectly indicates that CPU is not MTK-based (likely Spreadtrum SC6820 if 3G functionality is absent or Spreadtrum SC8810 if it is present)
What is the real width of the phone?
It seems to me it is about 64mm, not 60.8 (as described in seller specs)
What is the RAM size?
Does it have 256 or 512MB RAM?
What is the real Andriod version?
Does it have Android 2.3.X disguised as Android 4.X.X?
I will be grateful for your response.
Villis1251 said:
I also interesting for this phone, but I have some doubt about the specs of this item. If you could clear some important properties for me, such as:
Does it have GPS functionality?
If not, this indirectly indicates that CPU is not MTK-based (likely Spreadtrum SC6820 if 3G functionality is absent or Spreadtrum SC8810 if it is present)
What is the real width of the phone?
It seems to me it is about 64mm, not 60.8 (as described in seller specs)
What is the RAM size?
Does it have 256 or 512MB RAM?
What is the real Andriod version?
Does it have Android 2.3.X disguised as Android 4.X.X?
I will be grateful for your response.
Click to expand...
Click to collapse
Ok, first my honest suggestion dont buy this phone it has pathetic performance. For the same price go for a real MTK6577 dual core. ANyways below are the answers to your question
> Real CPU frequence seems to be 1GHZ
>Mali 300 GPU
>no 3G
>no GPS
>256MB RAM and 256 MB ROM
>I am not sure if its real JB and I cant figure it out but it says JB 4.2.1 and the kernel is 2.6.35.7 and hence I guess its a fake JB. The funny part is under baseband version it says "MT6589 1.5GHZ quad cores" !!!! offcourse it means the firmware/build.prop has been tweaked and is reporting false values. Also when I ran Antutu it gives a score of about 3500 which is useless when compared to what is required to run games ..etc. I hope I have helped.
Thank you much - you helped me to avoid hasty purchase. And good luck in rooting your device.
custom recovery
Villis1251 said:
Thank you much - you helped me to avoid hasty purchase. And good luck in rooting your device.
Click to expand...
Click to collapse
Finally I was able to stitch a ROM, using bits and pieces from different sources and its perfectly working. I only need to build a CWM recovery image based on the recovery image I have attached. Can someone help me do that? so that I can do a nandroid and ump my rom in case someone needs to recover their telsda A198
I need help. I have the same smartphone. But I need it to flash. Do You have the firmware for it?
aspirus said:
I need help. I have the same smartphone. But I need it to flash. Do You have the firmware for it?
Click to expand...
Click to collapse
I have stitched firmware which works perfectly and is rooted. I also got google play store installed. Its not original firmware, the original one is supposedly 4.2.1 (I think its fake), what I have got installed is 4.0.4 if that works for you let me know.
hel me please!!!
braindia said:
I have stitched firmware which works perfectly and is rooted. I also got google play store installed. Its not original firmware, the original one is supposedly 4.2.1 (I think its fake), what I have got installed is 4.0.4 if that works for you let me know.
Click to expand...
Click to collapse
braindia hello ... I bought the same phone and I have problems with the sims do not have to call or receive coverage ..... could you explain you did and how you did it?
there say that you put android 4.0 not work quite right? ... greetings from chile
Braindia hello...I have a bad microphone works, but only when you call. So there are 2 options: trash or firmware.I need a firmware that works correctly works. So 4.2.1 or 4.0.4 for me is not important. I am new in the firmware of the phone (did the firmware only the tablet). Thankful for step by step instructions from the specialist. While I couldn't even get the root.:silly:
aspirus said:
Braindia hello...I have a bad microphone works, but only when you call. So there are 2 options: trash or firmware.I need a firmware that works correctly works. So 4.2.1 or 4.0.4 for me is not important. I am new in the firmware of the phone (did the firmware only the tablet). Thankful for step by step instructions from the specialist. While I couldn't even get the root.:silly:
Click to expand...
Click to collapse
ok looks like lot of people have issues with this phone. Its a junk phone, all fake stuff on it. ANyways I will upload the firmware images and then you guys can use those to flash on your phones. Below is what I have done
1> Patched a 4.0.4 ROM which works perfectly
2>Removed useless preinstalled apps
3>rooted
4>Perfectly working dual sim,GPRS,WIFI,Camera,Camcorder .,..etc etc
4>The issue is with the IMEI, because of the way its stored you guys will need to use your own NV files.
The only thing I havent been able to do is get a working CWM, but you dont need it as you can flash the firmware images using researchdownload.
Braindia, you even pierced smartphone using researchdownload? Maybe I need a USB driver or researchdownload? What have you used? I can't understand how to enable the firmware on this phone: food & + -test menu; food & - picture with your phone and the triangle, but windows does not find the device driver.
working firmware files
aspirus said:
Braindia, you even pierced smartphone using researchdownload? Maybe I need a USB driver or researchdownload? What have you used? I can't understand how to enable the firmware on this phone: food & + -test menu; food & - picture with your phone and the triangle, but windows does not find the device driver.
Click to expand...
Click to collapse
Here you go, you flash at your own risk. If there are bricks/issues you are responsible for your own device.(Standard disclaimer) . I have uploaded all the files except system and NV, system image is kind of big and I am trying to figure it out where to upload it.. You dont need to worry about NV unless you completely erased the flash(never erase the complete flash or format it). If you havent done so then you are good to go.
Please google to find researchdownload and use it to flash the attached files. I wont be able to write the tutorial on using researchdownload so google is your friend.
I have also uploaded the gapps zip which will get you up and running with google play store. You need root to copy these files directly into system/apps folder.
I will be able to upload a system file which works, not the patched one with google play store, root ...etc etc . You do that on your own, I will help you do it.
Thanks !
Tutorial researchdownload not needed. I installed the USB driver and researchdownload. When the phone is loaded, I can connect it to your computer . BUT when I try to flash the phone with the help of researchdownload I need to enable firmware on your phone. In the mode of firmware (if I understand it correctly) phone is not detected by Windows. I wanted to know what USB drivers and version researchdownload used you, and as included mode firmware on your phone.
I have the original firmware.
aspirus said:
Tutorial researchdownload not needed. I installed the USB driver and researchdownload. When the phone is loaded, I can connect it to your computer . BUT when I try to flash the phone with the help of researchdownload I need to enable firmware on your phone. In the mode of firmware (if I understand it correctly) phone is not detected by Windows. I wanted to know what USB drivers and version researchdownload used you, and as included mode firmware on your phone.
I have the original firmware.
Click to expand...
Click to collapse
your phone is probably not detected due to 2 reasons
1> windows disabling non signed driver.. if thats the issue while you start the PC keep hitting F8 you will be shown various options
Select disable windows driver signature enforcement
2> Second reason is you need to add an entry in adb_usb.ini file I think its 0x1782 which is for SPRD enumerator. There are tons of links for this one of which is
http://forum.xda-developers.com/showthread.php?p=37271476
Possible causes checked. NO 1 and NO 2 Everything correctly, but still not working.To go the other way, I've tried about 10 of options to get the root, but the result is zero. You got root?
aspirus said:
Possible causes checked. NO 1 and NO 2 Everything correctly, but still not working.To go the other way, I've tried about 10 of options to get the root, but the result is zero. You got root?
Click to expand...
Click to collapse
getting root is simple, flash a CWM I have attached one, please note this does not work but it works enough to get you root. follow the below steps
1> Flash attached recovery
2> boot into recovery ... this will not show the normal CWM options but dont worry just connect to your pc
3> run ADB shell, you will be automatically in root mode
4> perform mount /system and then exit shell
5> push su binary & busybox directly to /system/bin (from the command prompt using adb push)
6>change permissions for su & busybox to make them runnable
7> exit from the shell and reboot
8> do adb install superuser.apk(optional this can be done later)
thats it you have su, and then you can sideload the superuser apk or you can do step 8 as above. Once you have rebooted and verified that you indeed have superuser you can flash the stock recovery back on the phone.
Note note note : The CWM recovery image is only for you to get root and it doesnt work and doesnt show the normal CWM options... you have been warned. You should flash your old recovery/stock recovery after you have achieved root.
Also can you give me the stock recovery image so that I can build a working CWM out of it. I overwrote mine and now stuck with another recovery which works but is not for this phone.
Thanks
:cyclops:
1> Flash attached recovery
2> boot into recovery ... this will not show the normal CWM options but dont worry just connect to your pc
3> run ADB shell, you will be automatically in root mode
error:device not fround
TADAN
I have a magic smartphone. In recovery he annihilated.
aspirus said:
:cyclops:
1> Flash attached recovery
2> boot into recovery ... this will not show the normal CWM options but dont worry just connect to your pc
3> run ADB shell, you will be automatically in root mode
error:device not fround
TADAN
I have a magic smartphone. In recovery he annihilated.
Click to expand...
Click to collapse
Hmm... I am not sure what is the issue please try attached drivers and pray that they work . use either 64bit or 32bit depending on your OS.
Also you said you have the firmware can you upload it ? I can do something more with the stock/original firmware, so please upload it
I installed a different driver for windowsXP and windows7, but the result is the same. Too much time for 54$. I buried this smartphone. So good luck to you on the path to custom firmware. One month firmware will be available my personal archive: http://files.mail.ru/A9FBE04381094135959559784E5F49A4
aspirus said:
I installed a different driver for windowsXP and windows7, but the result is the same. Too much time for 54$. I buried this smartphone. So good luck to you on the path to custom firmware. One month firmware will be available my personal archive: http://files.mail.ru/A9FBE04381094135959559784E5F49A4
Click to expand...
Click to collapse
Thanks ... I know this phone is a waste of time and money both. I am just using this phone as an experiment platform knowing fully well that this piece of junk will die anytime.
I hope I've posted this in the correct place. Apologies if not... I'm sure a moderator will move to correct place.
Hi everyone,
I’d like to share my THL W1+ custom ROM with you all.
It is based on a CJ ROM which I believe is the international ROM version.
Natively, the CJ ROM had some benefits over the stock standard Chinese THL ROM such as not showing Chinese cities in call log etc.
I cant remember all of the tweaks I've made in this custom ROM as it was "cooked" over an extended period of time but here are a few…
Google Apps working and upgraded
Default IME keyboard upgraded
Removed Chinese Apps and input methods
Removed factory reset option from settings to prevent reboot loop (use custom recovery to reset)
Improved screen brightness
updater-script changes for Wi-Fi fix
Included Facebook, Skype and Flash in DATA partition (can be uninstalled)
build.prop changes: font size, English language is default, time zone default to Pacific/Auckland
Download and use at your own risk. No responsibility is taken for damage done to your phone through using this ROM.
I’ve included in this download package everything I can think of that you'll need including the CJ ROM, a version of SP Flash Tool, the update.zip file, zip files to root and unroot the phone plus ADB and VCOM drivers.
The all-inclusive package can be downloaded from here…
http://www.mediafire.com/?p08zo4jwypz23
It is split into four compressed files. Use software such as 7zip to uncompress.
#1 First, flash your phone via SP Flash Tools with the stock CJ ROM. I’ve added a custom recovery to the ROM which you will require later to install the update.zip file.
If you do not know how to flash your phone here is a great tutorial... http://bm-smartphone-reviews.blogspot.co.nz/2012/05/mt6575-flashing-tutorial.html
#2 Once you have successfully flashed the CJ ROM you need to install the update.
Copy the update.zip file to your microSD card or power on the phone and copy to internal storage.
Remove your battery and reinsert it.
Hold down the Vol+ button and power on. You should boot into recovery mode.
Now using your volume keys you can select the update from zip option (power button is select). Choose the update.zip file you copied to your phone and confirm.
Wait for the update to complete and then reboot.
That should be it!
Hope you enjoy this ROM.
Invalid imei
I install your rom and is perfect. i manage to unbrick my W1+ with this rom. only the imei is invalid and i cant restore them. i see a folder named imei drivers (something like that ) in your pachage. how i can use them to restore the imei. i tried meny tutorials from the net but still nothing
thanks for your time
Aris
Hello, it is good to hear people are using the ROM.
I think the folder you are referring to is one inside the DRIVERS folder and simply contains CDC driver files.
I've not had any IMEI issues on the W1+ so can't speak from experience but I would suggest trying the following...
ROOT the phone using the root update.zip in the package.
Download MTK Droid Tool... http://www.mediafire.com/download/a41a0u73dc7rw2h/MtkDroidTools_v248.zip
MTK Droid Tool has a Write IMEI function.
Once your phone is rooted make sure USB debugging is turned on (Settings > Developer options).
Failing that, another option would be to download Mobile Uncle Tools from Google Play. Again, this requires root privileges and you'll need to connect to a Wifi network as your SIM's are not working. I understand this app also has IMEI tools.
Hopefully this works for you.
marsian720 said:
I install your rom and is perfect. i manage to unbrick my W1+ with this rom. only the imei is invalid and i cant restore them. i see a folder named imei drivers (something like that ) in your pachage. how i can use them to restore the imei. i tried meny tutorials from the net but still nothing
thanks for your time
Aris
Click to expand...
Click to collapse
inspectaclueso said:
Hello, it is good to hear people are using the ROM.
I think the folder you are referring to is one inside the DRIVERS folder and simply contains CDC driver files.
I've not had any IMEI issues on the W1+ so can't speak from experience but I would suggest trying the following...
ROOT the phone using the root update.zip in the package.
Download MTK Droid Tool... http://www.mediafire.com/download/a41a0u73dc7rw2h/MtkDroidTools_v248.zip
MTK Droid Tool has a Write IMEI function.
Once your phone is rooted make sure USB debugging is turned on (Settings > Developer options).
Failing that, another option would be to download Mobile Uncle Tools from Google Play. Again, this requires root privileges and you'll need to connect to a Wifi network as your SIM's are not working. I understand this app also has IMEI tools.
Hopefully this works for you.
Click to expand...
Click to collapse
Thanks for youe reply. mtk droid and mobile uncle didn't work. Finally i found this "THL W1 INVALID IMEI TOOL 4.0.4" and i cewate a new imei file and replace it inti the phone root and now everything is ok.
your rom is smooth. hope to upgrade it to android 4.2 .....
Thanks for the update and info. Glad you got it sorted.
No plans to release another ROM for this phone as it is no longer available.
Cheers
marsian720 said:
Thanks for youe reply. mtk droid and mobile uncle didn't work. Finally i found this "THL W1 INVALID IMEI TOOL 4.0.4" and i cewate a new imei file and replace it inti the phone root and now everything is ok.
your rom is smooth. hope to upgrade it to android 4.2 .....
Click to expand...
Click to collapse
Hi
I am new to hacking android. I have built linux distros in the past, and have worked with Linux for 15 years,
I have just rooted a ZTE V965. It doesn't come pre-installed with Play store, and has all sorts of ZTE-specific Chinese apps. It has a good baseband circuit, a good screen, reasonable camera and I think is a great value phone, apart from the awful UI.
It is an android phone, although heavily customised. It has an MTK6589 processor coupled with 4Gb ROM and 512Mb RAM.
I have other phones which operate a much more "Vanilla" android. For example, the Guophone 9105 which also uses an MTK6589. This has a troubling tendency to reboot every random interval. Approx 6 times a week.
I have had success in the past running Linux systems built for much earlier kernels on later kernels. This suggests the ABI (application binary interface) for the Linux kernel changes rather slowly.
I am wondering how well the userland apps are separated from the kernel and drivers on Android.
Specifically, is it feasible to dump all the UI stuff from one phone onto another then change the init to launch the other UI?
Would this risk bricking the phone, or would the shell commands and ADB infrastructure still likely operate?
I guess I should change the bootloader to one that supports fastboot first, right? Is ther a how-to on achieveing this from the root shell?
Thanks for any thoughts
Nick.
Nick Hill said:
Hi
I am new to hacking android. I have built linux distros in the past, and have worked with Linux for 15 years,
I have just rooted a ZTE V965. It doesn't come pre-installed with Play store, and has all sorts of ZTE-specific Chinese apps. It has a good baseband circuit, a good screen, reasonable camera and I think is a great value phone, apart from the awful UI.
It is an android phone, although heavily customised. It has an MTK6589 processor coupled with 4Gb ROM and 512Mb RAM.
I have other phones which operate a much more "Vanilla" android. For example, the Guophone 9105 which also uses an MTK6589. This has a troubling tendency to reboot every random interval. Approx 6 times a week.
I have had success in the past running Linux systems built for much earlier kernels on later kernels. This suggests the ABI (application binary interface) for the Linux kernel changes rather slowly.
I am wondering how well the userland apps are separated from the kernel and drivers on Android.
Specifically, is it feasible to dump all the UI stuff from one phone onto another then change the init to launch the other UI?
Would this risk bricking the phone, or would the shell commands and ADB infrastructure still likely operate?
I guess I should change the bootloader to one that supports fastboot first, right? Is ther a how-to on achieveing this from the root shell?
Thanks for any thoughts
Nick.
Click to expand...
Click to collapse
Hi Nick, I have the same phone. I'm also very new to android, last phone was iOS and before that windows. I managed to root the V965 using Vroot. I also managed to install SuperSU and CWM. However, the CWM is not fully functional, I can only do a factory reset, not install any packages or roms. Probably the phone has a locked bootloader. I can't check, because the USB driver with the phone doesnt support fastboot.
I really need to get google play working in this phone, read a lot of stuff, tried many things, but I havent succeeded yet. Please let me know if you make any progress.
In China they are flashing this phone, found some ROMs even, but I am not sure how they manage and google translate isn't much help there.
http://www.romjd.com/Device/zte-v965/hot/all/1
Hmmm my V965 is having some issues now
After a factory reset, the setup wizard keeps crashing. Even after another resest. So I can't get in the phone anymore.
Any chance you can send me the USB drivers that are on the phone? My phone isnt deteceted anymore, so I can't access the drivers, which I want to reinstall. And of course they are not on the ZTE website.
Byte_Me said:
Hmmm my V965 is having some issues now
After a factory reset, the setup wizard keeps crashing. Even after another resest. So I can't get in the phone anymore.
Any chance you can send me the USB drivers that are on the phone? My phone isnt deteceted anymore, so I can't access the drivers, which I want to reinstall. And of course they are not on the ZTE website.
Click to expand...
Click to collapse
Hi
You can temporarily download the ZTE v965 USB drivers from
www dot nickhill dot co dot uk forward slash ztev965usb dot zip
Byte_Me said:
Hi Nick, I have the same phone. I'm also very new to android, last phone was iOS and before that windows. I managed to root the V965 using Vroot. I also managed to install SuperSU and CWM. However, the CWM is not fully functional, I can only do a factory reset, not install any packages or roms. Probably the phone has a locked bootloader. I can't check, because the USB driver with the phone doesnt support fastboot.
Click to expand...
Click to collapse
Fastboot and ADB appear to be standard protocols, at least on my Ubuntu, which don't need special drivers. However, it does appear that the stock boot loaader on the v965 does fail to incorporate the fastboot option.
If you remove the battery, replace it then turn on holding the volume down, you will get a menu, but fastboot is not there.
I don't know for a fact, but I do suspect that if you have access to the running android system as root, then you could in principle change any of the internal flash data. Therefore, in principle, I guess you could replace the boot loader or anything else in the running android system. Anyone please correct me if I am wrong, or confirm if I am right.
The feature set of this phone seems to be the same as the feature set of my Guophone. MTK6589, dual SIM, etc. So this image may be a good place to start if considering a transplant.
If you have ROMs, then perhaps it is possible to flash the ROM from a root terminal. I'm thinking add the uncompressed ROM to the Micro SD card, then using the dd command, block copy it to the appropriate image area on the internal ROM, reboot, reset to factory defaults.
If anyone more experienced than me with the nuts and bolts of Android can confirm or deny this will work, or where it should be put, please let me know.
An important factor is that the NAND is not locked on the ZTE V965. So if you have a root shell on the phone, you can issue the following command:
mount -o remount,rw /[email protected] /system/
Once you have done this, you will have read/write access to the system partition.
The only thing I then need to know is what should I avoid changing that may break the ADB bridge/root console?
And is all the UI stuff kept together, if so, where?
Shuffle it around a bit, make a new ROM
Thanks for the driver!
Unfortuntely it doesn't help
I found out the culprit, I tried to install gapps (google apps package) to the system app folder. I thought these changes would be reversed with a factory reset, but they are not. Setupwizard.apk keeps crashing and is preventing me from accessing my phone, so I must find a way to remove it from the system app folder. However, since this error occurred, I am not able to contact the phone in any way from the PC. Adb toolkit does not detect it, even when I reinstalled your driver. It's quite puzzling, I dont understand why in recovery mode I cannot connect adb-toolkit anymore.
Got my V965 working again, but it was a lot of hassle with shell access. Still not fully functional, no drives detected when i connect to USB, which is quite annoying, but not more than that. If you ever make any progress with google apps or flashing, please keep me informed, that would make this phone much more useable. I'll also keep hacking away at it, but without a bootloader unlock (I still think this is the problem), I don't think it will be possible.
I'm convinced it's possible to flash the phone, it seems they do it a lot in China.
I found a website with a couple of custom ROMs specific for the V965:
http://www.romjd.com/Rom/Detail/17086
And what I suspect is a rooting & flashing tool. Rooting works, I haven't figured out flashing yet.
http://dl.vmall.com/c0xa12brvo
I've also tried flashing from the settings - update menu in the phone, but it never finds the ROM (update.zip)
I did find another problem, I can't be reached on my phone, it always goes to voicemail. Same SIM in another phone works fine. No idea what's causing this.
Byte_Me said:
Got my V965 working again, but it was a lot of hassle with shell access. Still not fully functional, no drives detected when i connect to USB, which is quite annoying, but not more than that. If you ever make any progress with google apps or flashing, please keep me informed, that would make this phone much more useable. I'll also keep hacking away at it, but without a bootloader unlock (I still think this is the problem), I don't think it will be possible.
Click to expand...
Click to collapse
Hi
I might be able to help you with the problem.
I have a mint, unused ZTE v965. I have used MTK Droid root and tools to extract a backup of the entire new phone. It is currently uploading to www dot nickhill dot co dot uk forward slash ZTE-V965_new_backup.zip
You should be able to write this back to your phone using flashtool.exe.
I don't know for sure if this will work, so entirely at your own risk! Just trying to help. If unsure, ask around.
I am new to this forum, so please remember to click the thanks button if you find anything I have done helpful!
Meanwhile, the MTK droid root and tools has a function to remove much of the chinese stuff (once the system has been installed) and there is always the cyanogenmod gapps package. This may be worth investigating.
Nick Hill said:
Hi
I might be able to help you with the problem.
I have a mint, unused ZTE v965. I have used MTK Droid root and tools to extract a backup of the entire new phone. It is currently uploading to www dot nickhill dot co dot uk forward slash ZTE-V965_new_backup.zip
Click to expand...
Click to collapse
The file size should be 635,972,093 bytes and should finish uploading at 04:00 GMT
md5sum 17ecfdd1040d5dbfab70a3adbc24e07a
Thanks for the ROM, i'll give it a go. I will try to install it using the update option in the settings, that seems the safest.
Be careful with gapps. setupwizard.apk + factory reset = a lot of problems (if you install in system app folder)
OMG that tool is awesome. created CWM boot, installed your ROM, then installed a clean ROM, then installed gapps, all working!!!
Byte_Me said:
OMG that tool is awesome. created CWM boot, installed your ROM, then installed a clean ROM, then installed gapps, all working!!!
Click to expand...
Click to collapse
Firstly, I'm glad it's working for you.
Secondly, which tools did you use? Did you unpack the zip, open flashtools, select the scatter file then program the phone, or did you use some other method?
Which clean ROM did you then install, and how did you install it?
Did you then use MobileUncle to install CWM then use the cyanogenmod 10.1 gapps, or did you do something different?
It is useful to remember that MTKdroidtools has a useful function to remove chinese stuff. I think if more people contributed to the list of Chinese files that are safe to remove, that would be blade.
A detailed step-by-step guide might be helpful for anyone else with the same problem. One of the general problems I find is that there are plenty of guides around referring to this program, or that program, but few are detailed enough for someone who doesn't already know about those programs to use.
I pretty much bricked a Lenovo A766 yesterday, and it took several hours to learn about the tools to eventually unbrick it.
I would have rather spent my time understanding what is really going on, rather than spending my time learning vaguely what tool achieves what end result. If I understood more about the Android system, and built that knowledge on my understanding of Linux, I reckon I could achieve much more.
One thing I notice is that tablets and smartphones are actually replacing desktops and laptops. February this year, windows machines were down 7% YOY. I use Ubuntu for my main computer. Using these tools on Windows led me to significant frustration! This has led me to understand why there is a move. Maybe the tools provided for windows need to eventually move to android. We could then potentially use USB OTG to service other android devices. MTKdroidtools and flashtools runnng as a host on a separate Android system would be cool.
Nick Hill said:
Firstly, I'm glad it's working for you.
Click to expand...
Click to collapse
Thanks, me too
Secondly, which tools did you use? Did you unpack the zip, open flashtools, select the scatter file then program the phone, or did you use some other method?
Click to expand...
Click to collapse
I used MTK tools as described in that topic, rooted, made backup, installed CWM
Which clean ROM did you then install, and how did you install it?
Click to expand...
Click to collapse
I used the update tool from CWM to flash this ROM:
http://www.romjd.com/Rom/Detail/17086
That ROM is not very clean though, You might as well clean your own ROM
Did you then use MobileUncle to install CWM then use the cyanogenmod 10.1 gapps, or did you do something different?
Click to expand...
Click to collapse
CWM is installed using MTK Droid Root and Tools:
http://forum.xda-developers.com/showpost.php?p=44660171&postcount=417
This gapps version I installed: gapps-jb-20121011-signed
It's installed using CWM bootloader: install .zip package
It is useful to remember that MTKdroidtools has a useful function to remove chinese stuff. I think if more people contributed to the list of Chinese files that are safe to remove, that would be blade.
Click to expand...
Click to collapse
I used the delete China function, but it didnt catch very much. But with all the functions available now, it's quite easy to clean manually.
A detailed step-by-step guide might be helpful for anyone else with the same problem. One of the general problems I find is that there are plenty of guides around referring to this program, or that program, but few are detailed enough for someone who doesn't already know about those programs to use.
Click to expand...
Click to collapse
Yes, I plan to make a topic for this phone, but at the moment I am still testing many things.
I pretty much bricked a Lenovo A766 yesterday, and it took several hours to learn about the tools to eventually unbrick it. I would have rather spent my time understanding what is really going on, rather than spending my time learning vaguely what tool achieves what end result. If I understood more about the Android system, and built that knowledge on my understanding of Linux, I reckon I could achieve much more.
Click to expand...
Click to collapse
I know how you feel, I was ready to toss this phone in the trash
One thing I notice is that tablets and smartphones are actually replacing desktops and laptops. February this year, windows machines were down 7% YOY. I use Ubuntu for my main computer. Using these tools on Windows led me to significant frustration! This has led me to understand why there is a move. Maybe the tools provided for windows need to eventually move to android. We could then potentially use USB OTG to service other android devices. MTKdroidtools and flashtools runnng as a host on a separate Android system would be cool.
Click to expand...
Click to collapse
I have no idea about the possibilities there. I'm not a programmer, just someone who is good with computers and knows a little bit of everything.
PS. I could also use some thanks as well, maybe get some respect around here
Nick Hill said:
...
Click to expand...
Click to collapse
Did you give it a try yet? Another user did and google apps are working for him, so thats 2 for 2.
Are you still on your original ROM? If so, I have a question for you. Do you get notification badges on your icons, for instance, when you have a missed call, is there a red box with a 1 on the phone icon? Also, do your contacts get ID-ed when they call you? I have some problems with that, caused by the country code prefix. I am still running that ROM I downlaoded from the Chinese forum, but if your ROM doent have these issues, I will switch back ASAP.
Nick Hill said:
Firstly, I'm glad it's working for you.
Click to expand...
Click to collapse
as you are a Lenovo a766 owner, may you help me with this?
http://forum.xda-developers.com/showthread.php?p=49076877#post49076877
Where are configuration settings stored accross factory resets?
I have come to the (perhaps erroneous) conclusion that the user interface and what the user will experience is governed primarily from:
the APKs in
/system/app/
/system/vendor/operator/app/
and the configuration files pertaining to the installed apps, which is located at:
/data/user/0/
I guess that when the android device is factory reset, the /data partition is completely cleared, right?
Is there a set of standard configurations which are unpacked from somewhere into /data/user/0/ after a factory reset, or is it normal for all configurations to be stored in their respective APKs?
In order to keep this thread clean, please use this one to discuss about Development, Support or Software Updates.
HOW-TO Root, Install Custom Recovery (TWRP) and Restore Stock ROM guide: https://docs.google.com/presentation/d/1NJcDBkLk8zMwyv2BTqRjn2NB_ZOWKjP1fRpSVr44Oxk
ROMs:
To avoid any possible issue, do not forget to backup your NVRAM so that you won't risk to lose your IMEI. How-to: http://www.anythingultimate.in/2015/11/how-to-backup-your-nvram-partition.html
Stock (Android 6.0)
- 20170908: https://mega.nz/#!Va5H0AZC!cAvRB761-84_nYMQFCOaJ4F36Nen9wgtu75U40J-xoo
DO NOT USE THE "Format All & Download" OPTION IF YOU CARE ABOUT YOUR IMEI! Choose "Firmware Upgrade" instead.
Previous Releases:
- 20170526: https://drive.google.com/file/d/0B4T8kD2wDMS1U1BVVmNGdnNYTzA
Flash Tool
- SP Flash Tool for Windows & Linux: https://mega.nz/#F!dYUm0TbB!SWeMLb5Wu1NbRzTPQ8-s_A
Recovery:
- TWRP 3.1 by @grinjuk1999 : https://mega.nz/#F!kQcRVRYA!HDfRwSQqY8v0il_RQ2pxOg
Root:
Rooting Methods (if you are on Stock ROM)
- SuperSU (flashable using TWRP): http://forum.xda-developers.com/apps/supersu
Extras (Root-Only):
Customization
- Xposed Framework: http://forum.xda-developers.com/showthread.php?t=3034811
Useful Third-Party Apps:
Battery Life
- Amplify: https://play.google.com/store/apps/details?id=com.ryansteckler.nlpunbounce&hl=en
- Greenify: https://play.google.com/store/apps/details?id=com.oasisfeng.greenify&hl=en
md1_db and ap_db files gretel A7
md1_db and ap_db files. Are there ways to get them somehow. I lost my IMEI and trying to write it with SN writer, but manufacturer did not send me those files, just tool.
Menaged to restore IMEI. Engineering mode doesn't work because there is no CDS settimg. SN writer also not working because of mentioned files missing.
At the end I had to root device, install mobile uncle apk and another tool within mobile uncla app and write it from there.
Sent from my A7 using Tapatalk
Hi, I have a gretel a7 cell phone that keeps restarting and showing the message "interf sist stopped" I would like to know if the rom made available in this topic is multi-languages, since I am Brazilian, and if following your tutorial I can use the cell again.
I appreciate the attention
Lonely-Shadow
Lonely-Shadow said:
Hi, I have a gretel a7 cell phone that keeps restarting and showing the message "interf sist stopped" I would like to know if the rom made available in this topic is multi-languages, since I am Brazilian, and if following your tutorial I can use the cell again.
I appreciate the attention
Lonely-Shadow
Click to expand...
Click to collapse
Yes it is multi-language, you can follow the tutorial without any issue.
Just pay attention to keep an EMEI. Don't select download only, ot format+download. Keep it on firmware upgrade!
Sent from my A7 using Tapatalk
After installing this rom, several programs were installed without my permission, many with indication of virus ...
batata2323 said:
After installing this rom, several programs were installed without my permission, many with indication of virus ...
Click to expand...
Click to collapse
Which ROM? 20170908 or 20170526?
Thanks for the rom my son has problems of malware and publicity on a fresh install whith 20170526.
I will try the 20170908 (installed whith flash tool, need to Set Download-Agent to MTK_AllInOne_DA.bin because of a previously error 6012 (BROM ERROR: S_SECURITY_SF_CODE_COMMAND_FORBIDDEN (6012), MSP ERROR CODE: 0X00
Unfortunaly after a few week same problem, lot of crapp application installed
joom
aliexpress
once
and ads how appear in full screen or only on bottom..
Maybe my son instal by errors one of them because, popup suddenly appaer whith only 'install" button but she use the phone no more than 10 hours since december..
any advice to remove/check the rom ?
imei lost
obradovicsrdjan said:
Menaged to restore IMEI. Engineering mode doesn't work because there is no CDS settimg. SN writer also not working because of mentioned files missing.
At the end I had to root device, install mobile uncle apk and another tool within mobile uncla app and write it from there.
Sent from my A7 using Tapatalk
Click to expand...
Click to collapse
Hi,
I´ve lost my imei in the phone and I don´t find a solution how to get it back.
How can I write it back into the phone by using mobile uncle ?
totorourou said:
Unfortunaly after a few week same problem, lot of crapp application installed
joom
aliexpress
once
and ads how appear in full screen or only on bottom..
Maybe my son instal by errors one of them because, popup suddenly appaer whith only 'install" button but she use the phone no more than 10 hours since december..
any advice to remove/check the rom ?
Click to expand...
Click to collapse
same problem, very iritating. i rooted and deleted all thar junk so we shall se if it worked in the next days.
Sent from my A7 using Tapatalk
obradovicsrdjan said:
same problem, very iritating. i rooted and deleted all thar junk so we shall se if it worked in the next days.
Sent from my A7 using Tapatalk
Click to expand...
Click to collapse
seem like it worked, no harmfull app notification, no sudden battery drain, works well. although still having problems with proximity and light sensors, they don't work all the time. anyone with a solution?
Sent from my A7 using Tapatalk
obradovicsrdjan said:
seem like it worked, no harmfull app notification, no sudden battery drain, works well. although still having problems with proximity and light sensors, they don't work all the time. anyone with a solution?
Sent from my A7 using Tapatalk
Click to expand...
Click to collapse
Hi,
My father have the same phone, and the same issues. I plan to flash the stock ROM and root it.
Which apps have you removed (pretty important, cause I can access to the phone just for some days, when I visit him) ?
And how ? Something like root uninstaller can do the trick ?
Thanks a lot
First you have to flash ROM.
NOTICE:
1.before connecting phone to PS always remove battery
2.Doing "Firmware upgrade" will not work, "Download only" also not working. Do "Format all". This will erase your IMEI, but after flashing and rooting you can install Chamelephon from Play Store and write your IMEI.
I did it with:
ROM：
https://mega.nz/#!NPg1HCCB!mUNgc-hLdwF1V-2XDw71iB1Shb201v2yc2JkK4LWezE
Tool:
https://mega.nz/#!hHh2EDbZ!kH8VzxAs5dcEwrBTjm9RhWYbtmxDqXBQUT8a88JvXbE
Steps:
https://mega.nz/#!IGoihDKL!2RHmGeSuHIg4UQvJbPyYV3IzyoRvxUj11fVZMBq2Egk
There are rooting instructions for rooting with TWRP through Recovery mode, in Power point on this Forum but can't find it right now. After rooting install Unninstall app from Play Store and it would suggest what apps you could unninstall. As i remember there are apps like Medias and com.android.com.service, and so. You should even delete it in file manager if located.
AND VERY IMPORTANT, if you ever try to sign in vit another Google account, or new account to your device, medias will emerge again, so you need to erase it again. It seems that it is a bug that appears with signing in to Google.
obradovicsrdjan said:
First you have to flash ROM.
NOTICE:
1.before connecting phone to PS always remove battery
2.Doing "Firmware upgrade" will not work, "Download only" also not working. Do "Format all". This will erase your IMEI, but after flashing and rooting you can install Chamelephon from Play Store and write your IMEI.
I did it with:
ROM：
https://mega.nz/#!NPg1HCCB!mUNgc-hLdwF1V-2XDw71iB1Shb201v2yc2JkK4LWezE
Tool:
https://mega.nz/#!hHh2EDbZ!kH8VzxAs5dcEwrBTjm9RhWYbtmxDqXBQUT8a88JvXbE
Steps:
https://mega.nz/#!IGoihDKL!2RHmGeSuHIg4UQvJbPyYV3IzyoRvxUj11fVZMBq2Egk
There are rooting instructions for rooting with TWRP through Recovery mode, in Power point on this Forum but can't find it right now. After rooting install Unninstall app from Play Store and it would suggest what apps you could unninstall. As i remember there are apps like Medias and com.android.com.service, and so. You should even delete it in file manager if located.
AND VERY IMPORTANT, if you ever try to sign in vit another Google account, or new account to your device, medias will emerge again, so you need to erase it again. It seems that it is a bug that appears with signing in to Google.
Click to expand...
Click to collapse
Thanks a lot for your time
What exactly do you mean by :
before connecting to PS (<= is for SP Flash Tool ?) always remove the battery (it's seem also unclear in the ppt, at a certain point, it's said to turn off the phone, then connect it for doing things with SP Flash Tool, then turn on by pressing Volume Up and Power Buttons. Is it right than we have to do it with the phone off ? And without battery like you suggest or we just remove the battery for a complet reset, and put it back when connecting to SP flash Tool, or let it remove when using SP ?)
com.android.service seems effectively a part of the problems, it appears in android warning message he receives. It could be usefull to create a list of apps than could safely be remove, for fixing the adware issues, I will do it, but I certainly not doing it before some weeks, I don't have the phone right now.
Thanks for the IEMI trick, I didn't know than an IEMI could be delete so easily.
FR4YEUR said:
What exactly do you mean by :
before connecting to PS ...
Click to expand...
Click to collapse
It is a typing mistake, I ment PC. When connecting phone to the PC with USB you need to remove the battery first (it doesn's say so in the instructions), because if the battery is inside the phone will start charging and connecting to PC like external drive and na Flash can't be performed. When formating and flashing with SP tool is done, than you can disconnect from PC, insert battery, and Root with instructions below through Recovery mode.
Here are a Root instructions
https://docs.google.com/presentation/d/1NJcDBkLk8zMwyv2BTqRjn2NB_ZOWKjP1fRpSVr44Oxk/edit#slide=id.p
This adds popup, and background ram eating processes are a common problem with cheap smartphones from alixpress. There are several "cleaned" ROM-s from PDA developers for Gretel A7, but I didn't want to risk because the phone is now working fine, no bugs etc. Only thing that is pain in the ... is a proximity sensor that doesn't work, and it seems to be a hardware issue, so i need to manually turn off screen after answering the call.
Hello to all,
Please some help/advice, I'm new in this.
I have more than a week trying to find a way to install Google Services on a Huawei P40 Lite. version JNY-LX2 (JNY-LGRP2-OVS 10.1.0.297 - C25E5R2P1).
I found some methods failed with (Using LZPlay app) then I found that is needed to do a downgrade and use the Googlefier method or dload method but I'm currently stuck with the following 2 issues
1-) I found a firmware in pro-teammt.ru that is minor to 10.1.0.150 but I cannot find the way to download it.
2-) Before to proceed I´d like to make a backup of the stock firmware that the device has now (if something goes wrong), but I don´t find yet a way to make the stock ROM backup.
Then,
1-) May someone help me out in how to make a stock rom backup. Maybe some written guide that I haven´t found yet.
The device is not rooted but I'm confused, since I see in some sites they say that only can be done in rooted devices and in others sites they say is no needed be rooted.
2-) How to download the firmware from pro-teammt.ru since when I do click on links always appears server connection errors or that maybe have been removed.
3-) The C25 region I found that is for Latam, but C605 is for Latam too I think. So, If only possible to find and download C605 firmware would be work on this device?
Thanks in advance for any help.
Regards
Device's Android must be rooted ( temporarily or permanent ) to fully backup its Stock ROM ( what consists of boot.img, system.img, recovery.img, metadata, etc.pp ): Reason is that Android must get mounted as RW what requires superuser rights.
Once rooted a full backup easily can be done by means of ADB.
Example:
Code:
adb devices
adb exec-out dd if=/dev/block/mmcblk0p7/boot.img > C:\boot.img
adb exec-out dd if=/dev/block/mmcblk0p20/system.img > C:\system.img
...
If you have an eMMC internal storage you can see names and partitions at same time running
Code:
adb shell "ls -l /dev/block/platform/msm_sdcc.1/by-name/"
jwoegerbauer said:
Device's Android must be rooted ( temporarily or permanent ) to fully backup its Stock ROM...
Click to expand...
Click to collapse
Thanks for your answer. Then first step should be roote the device.
Do you know a good guide to root this Huawei model (or guide that works for any device)?
I can search on google, but there is many results and some noise since some are old or different procedures and I'm not sure which would be safer to choose in order to avoid damage the device.
Regards
Because your phone is running Android 10 ( EMUI 10 ) and based on Kinn 810 chipset I guess all the so-called One-Click-ROOT tools aren't working at all.
I don't own this phone, hence I can't guide you further. Thanks for your understanding.
jwoegerbauer said:
Because your phone is running Android 10 ( EMUI 10 ) and based on Kinn 810 chipset I guess all the so-called One-Click-ROOT tools aren't working at all.
I don't own this phone, hence I can't guide you further. Thanks for your understanding.
Click to expand...
Click to collapse
I understand. Thanks for your help anyway.
Regards