Related
android oreo 8.1 firmware leak for alldocube power m3 ,guys who own the pad have a try!and give a bug reply post.
alldocube power me oreo 8.1 firmware(0621)
a offical oreo 8.1 firmware with google play for power m3:http://www.mediafire.com/file/qev79...2B32.Neutral.8.1.V01.01.20190118user.zip/file
The firmware is working. One problem: after installation in TWRP package OpenGapps the system crashes. I couldn't find the replacement option (arm64, 8.1). Energy saving is good. Root access - Magisk.
P.S.: Build OpenGapps UNOFFICIAL is suitable for installation and works after components are updated (for example, with Yalp Store or Aurora App Store, F-Droid & etc.)
P.P.S.: If someone decides to install the firmware - must first make a backup of the NVRAM!!! Because the firmware will have to be installed with formatting and the nvram section will die. After flashing the firmware, it must be restored from the saved backup.
For me I got Problems with the display.. Its kinda over saturated.
If someone can explain the rights step to flash this rom would be nice. I cant install twrp over the Flash tool i used this for flashing twrp:
https://forum.xda-developers.com/android/general/cube-power-m3-tablet-twrp-img-t3772179
Hai_Duong said:
For me I got Problems with the display.. Its kinda over saturated.
If someone can explain the rights step to flash this rom would be nice. I cant install twrp over the Flash tool i used this for flashing twrp:
https://forum.xda-developers.com/android/general/cube-power-m3-tablet-twrp-img-t3772179
Click to expand...
Click to collapse
Take my version TWRP specifically for Oreo (the same in Russian how to install and patched Magisk boot.img to obtain root-rights): hire.
The saturation of the screen is comfortable for me, Occasionally settings of installed programs fly off.
TWRP Oreo
patched boot
config.gz in /proc fs
wangyiling said:
android oreo 8.1 firmware leak for alldocube power m3 ,guys who own the pad have a try!and give a bug reply post.
alldocube power me oreo 8.1 firmware(0621)
Click to expand...
Click to collapse
running linux kernel was configured to have /proc/config.gz. The configuration for this is found in
General setup
[*] Kernel .config support
[*] Enable access to .config through /proc/config.gz
with oreo 8.1...
treble checker reports device to be supported by Project - only with A-partition.
did anyone tried out to switch to GSI image?
cmarxmeier said:
tried out to switch to GSI image
Click to expand...
Click to collapse
Theoretically, should be suitable all the firmware from this theme and some of this. But we need TWRP support Treble, if I understand correctly (I tried the project on another device, everything was already done).
Treble works. As an experiment, I launched Omni 8.1. Started, but gives error 'com.android.phone has stopped'. The system image installed through fastboot (my TWRP isn't able to install to the system partition). The bootloader must be unlocked.
AOSiP Pizza Alpha [EXPERIMENTAL] - wi-fi, sound work, phone don't.
[9.0.0] ArrowOS (Android 9) - very quite good, but again the phone module. Need a system.img way to rebuild, or looking for a fix. In the firmware theme this is the main question. And in general, I liked the firmware, fast response and fast touch interface.
https://megaup.net/6u3i/Y5352.CUBE.T1001.MID.2+32.Neutral.8.1.V01.01.20181210user.zip
also some one can try this new power m3 8.1 firmware .
it's not beta .
wangyiling said:
also some one can try this new power m3 8.1 firmware
Click to expand...
Click to collapse
I already have this version installed. The work of the Treble Project checked on it. Firmware international, Google applications available, fixed some bugs. The installation also requires restoring the nvram partition.
Here's an updated TWRP 3.2.1-0 x64 for Oreo with support for the Treble Project (my port from Infinix X571): AFH
ViAlexSt said:
Theoretically, should be suitable all the firmware from this theme and some of this. But we need TWRP support Treble, if I understand correctly (I tried the project on another device, everything was already done).
Treble works. As an experiment, I launched Omni 8.1. Started, but gives error 'com.android.phone has stopped'. The system image installed through fastboot (my TWRP isn't able to install to the system partition). The bootloader must be unlocked.
AOSiP Pizza Alpha [EXPERIMENTAL] - wi-fi, sound work, phone don't.
[9.0.0] ArrowOS (Android 9) - very quite good, but again the phone module. Need a system.img way to rebuild, or looking for a fix. In the firmware theme this is the main question. And in general, I liked the firmware, fast response and fast touch interface.
Click to expand...
Click to collapse
ViAlexSt said:
I already have this version installed. The work of the Treble Project checked on it. Firmware international, Google applications available, fixed some bugs. The installation also requires restoring the nvram partition.
Here's an updated TWRP 3.2.1-0 x64 for Oreo with support for the Treble Project (my port from Infinix X571): AFH
Click to expand...
Click to collapse
nice
wangyiling said:
https://megaup.net/6u3i/Y5352.CUBE.T1001.MID.2+32.Neutral.8.1.V01.01.20181210user.zip
also some one can try this new power m3 8.1 firmware .
it's not beta .
Click to expand...
Click to collapse
Firmware brings up DualWifi again - 5GHz stopped working in former version.
EngineerMode.apk seems to be removed from priv-app's in this release - restoring manually from old image did not help - app crashes.
No easy way to set IMEI on device without MTK EngineeringMode.
cmarxmeier said:
Firmware brings up DualWifi again - 5GHz stopped working in former version.
EngineerMode.apk seems to be removed from priv-app's in this release - restoring manually from old image did not help - app crashes.
No easy way to set IMEI on device without MTK EngineeringMode.
Click to expand...
Click to collapse
for imei restore ,i think mtk sn write tool will do some help
wangyiling said:
for imei restore ,i think mtk sn write tool will do some help
Click to expand...
Click to collapse
mtk sn write tool did the job. - shows up with correct IMEI and VoLTE 4G.
patched boot.img with magisk
- works like a charm so far.
Looking forward to check USB-C Port with Icy Box to get Ethernet/HDMI device listed on USB-Bus.
wangyiling said:
https://megaup.net/6u3i/Y5352.CUBE.T1001.MID.2+32.Neutral.8.1.V01.01.20181210user.zip
also some one can try this new power m3 8.1 firmware .
it's not beta .
Click to expand...
Click to collapse
Someone does have TWRP recovery for this one? Trying to port old one, but getting buggy rotated recovery...
fraddy91 said:
Someone does have TWRP recovery for this one? Trying to port old one, but getting buggy rotated recovery...
Click to expand...
Click to collapse
Compile yourself by adding the lines:
# TWRP
......
RECOVERY_TOUCHSCREEN_SWAP_XY := true
RECOVERY_TOUCHSCREEN_FLIP_Y := true
Or Phils recovery.
You need to be in stock emui 8 with unlocked bootloader.
If you are in elemental rom come back to stock emui 8 then flash this rom.
If you are in another gsi you can proceed directly (flash below recovery then do factory reset then flash gsi los rom via fastboot then again reboot to stock recovery do factory reset)
If you are in stock emui 8 do not wipe anything just flash it via fastboot and do factory reset.
first flash this recovery
https://mega.nz/#!cbJFAIQD!qvp1KnZ0qxlg6nHDFmpM5qyZ9QUVIDe5PoZE0BQf8fs
Fastboot command: fastboot flash recovery_ramdisk name of recovery.img
Then download
https://openkirin.net/download/
Fastboot command: fastboot flash system name of image.img
Los or RR rom and flash via fastboot (no need to wipe anything) then reboot to recovery do factory reset. You will have oreo 8.1 with gapps ,full signal bars,face unlock and stock camera.
If you are experiencing no sound its not gsi problem you didn't flashed stock completely so first flash this twrp recovery (only if you are in oreo not for emui5)
https://mega.nz/#!a81EDZAR!2-9yPFh3reghkGcfSl3nRIJhHGkP8fqDsgUG66ewjkk
Then flash stock emui 8 via huru
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
If huru only flased update.zip and gave you error no update_full_hw.zip and no update_data_full_public.zip not found in sd card then you need to rename them and flash again without wiping anything.
If stock emui 8 taking more than 5 minutes to boot then flash stock recovery mentioned above and do factory reset then it will boot with in 5 minutes.
If you don't have network or imei then you need to root. Then use any root explorer then go to cust/cn/all/localprop and change the line ro_config full network support=ture to false then reboot your network and imei will come back. You can do this in stock or in gsi.
RR ROM has great battery life with tons of customizations.
For emui8 flashing instructions,root and sound mod follow these instructions
https://forum.xda-developers.com/ho...si-honor-6x-8-1-0-t3809004/page5#post76981105
For telegram support of openkirin join this group
https://t.me/joinchat/HUf8EBJUJZQD281E59MdDw
Hell yess, thanks to open kirin team and you for mentioning it, the rom is excellent in use all bugs (the ones i faced in other gsi) fixed in this one and the availability of stock camera is just a cherry on top ?
Im newbie not familiar with this term
what is "gsi"?
need help
How to install emui 8 on bln-l21c432
jlan007 said:
Im newbie not familiar with this term
what is "gsi"?
need help
Click to expand...
Click to collapse
Generic system image. Read about project treble.
jlan007 said:
Im newbie not familiar with this term
what is "gsi"?
need help
Click to expand...
Click to collapse
Gsi means generic system image. In oreo custom roms will be available in system image formate we don't need twrp to flash custom roms just flash it via fastboot and factory reset.
Gsi roms will give you latest android os updates same as pixel devices getting so we don't need to wait for hauwei to release updates. If android p releases these gsi roms will give u update same as google devices getting. Oreo is game changer for every device.
If u want to flash gsi rom follow the emui8 upgrade method
https://forum.xda-developers.com/honor-6x/how-to/guide-update-to-emui-8-t3807806
Then follow instructions on openkirin support section.
--ahmed said:
How to install emui 8 on bln-l21c432
Click to expand...
Click to collapse
https://forum.xda-developers.com/honor-6x/how-to/guide-update-to-emui-8-t3807806
Follow that guide you will be on oreo in 10mins or less
If we rebrand to Chinese then update to Oreo and flash gsi..can we rebrand to our original variant or is there need to?
Which gsi redirection rom , carbon rom or los 15 ???
johnscrub said:
If we rebrand to Chinese then update to Oreo and flash gsi..can we rebrand to our original variant or is there need to?
Click to expand...
Click to collapse
Yes we can rebrand to original variant using hwota8
Khan ubaid said:
Which gsi redirection rom , carbon rom or los 15 ???
Click to expand...
Click to collapse
Go for Los 15 which is more stable and updated one.
Resurrection remix has huawei stock camera inbuilt....
Why flash stock recovery ? For those who are on Twrp ?
Great post. Hope you share some more experiences.
Trying to use the Google Play store it's telling me that my device isn't certified and I can't do anything..
NVM: For anyone else wondering I installed Magisk then the Magiskhide module and changed fingerprint.
Khan ubaid said:
Resurrection remix has huawei stock camera inbuilt....
Click to expand...
Click to collapse
Los is also had hauwei stock camera but rr in initial buid and los got 4 updates.
Nollie8969 said:
Why flash stock recovery ? For those who are on Twrp ?
Great post. Hope you share some more experiences.
Click to expand...
Click to collapse
Because you can't perform factory reset from twrp it can't do it correctly finally you will ended up in bootloop. You can flashctwrp right after doing factory reset but openkirin doesn't support twrp.
whateven12 said:
Trying to use the Google Play store it's telling me that my device isn't certified and I can't do anything..
NVM: For anyone else wondering I installed Magisk then the Magiskhide module and changed fingerprint.
Click to expand...
Click to collapse
So before flashing magdisk did playstore worked for you? Or did you flashed magdisk when flashing os? For me playstore works perfectly.
Ramesh006 said:
So before flashing magdisk did playstore worked for you? Or did you flashed magdisk when flashing os? For me playstore works perfectly.
Click to expand...
Click to collapse
Play store or any Google app wouldn't work for me before I install Magisk and the Module to change the fingerprint to a certified device.
No solution, but in the meantime you can use Aptoide as store: http://en.aptoide.com
whateven12 said:
Play store or any Google app wouldn't work for me before I install Magisk and the Module to change the fingerprint to a certified device.
Click to expand...
Click to collapse
Did you flashed los or rr? Try reflash.
Hello XDA, this patch is intended to fix issues that arise from using phh-based Treble GSIs. This patch aims to make
life bearable on these ROMs and to add the functions that are missing from EMUI 8 and the OpenKirin ROMs. With
this patch you can use any working Pie or 10 GSI and have a complete experience, having to do as few manual tweaks as
possible.
What this patch does:
- Restores offline charging functionality
- Fixes crash on Bluetooth/NFC section in settings
- Fixes headphone jack detection
- Fixes the missing apps in Play Store
- Fixes battery stats behavior by supplying a correct power profile
- Fixes the lack of Night Light in AOSP-based ROMs
Tested P GSI ROMs:
- AOSP 9
- LineageOS 16.0 (AndyYan)
Tested Q GSI ROMs:
- AOSP 10
- LineageOS 17.1 (AndyYan)
Tested R GSI ROMs:
none
Installation:
1 - Flash eva_amend_x.y.z.zip on TWRP
2 - Wipe cache
3 - Reboot
Download:
here
Source:
You can analyze the patch to see the source code.
Credits:
lo_ol, hi6250 community, Wattsensi
Changelog
Code:
2.0.0
- Removed redundant fixes
- NFC is now responsibility of the GSI. This NFC fix was wrong on so many levels I can't even begin to describe.
- All prior versions removed from Google Drive
1.1.0
- Add HWComposer fixes
1.0.0
- Initial release
This looks really promissing - thanks a lot! How about fixing the issue with wifi hotspot for P9? Would that be doable as well?
@Wattsensi Hi. I'm the new owner of an old P9 (EVA-L09) and I would like to install an Android 10 GSI ROM. The only problem is it feels much more complicated than on my other phone. On my (much newer) Nubia RM3, I unlocked the bootloader, flashed recovery, flashed the GSI and tadaaa.
On the P9, I managed to unlock the BL, flashed TWRP and I'm contemplating what GSI should I flash. The treble checker app said the phone is not Treble compatible. It also shows as A-only ARM64.
Can you please guide me on what to install or point me towards a guide?
Thank you
Nightwish1976 said:
@Wattsensi The treble checker app said the phone is not Treble compatible. It also shows as A-only ARM64.
Click to expand...
Click to collapse
Basically you shall first rebrand and upgrade to Oreo to get treble support, here is how:
https://forum.xda-developers.com/showpost.php?p=77161313&postcount=2
@xaweryp Thanks a lot for the input, now I'm downloading the files necessary to rebrand and update to Oreo.
LE: just finished updating to Oreo.
Can I just flash an A only Arm64 GSI, or are there another steps? I have that new recovery (Pretorianos80 v4), but I think it cannot access the internal storage...
Nightwish1976 said:
@Wattsensi Hi. I'm the new owner of an old P9 (EVA-L09) and I would like to install an Android 10 GSI ROM. The only problem is it feels much more complicated than on my other phone. On my (much newer) Nubia RM3, I unlocked the bootloader, flashed recovery, flashed the GSI and tadaaa.
On the P9, I managed to unlock the BL, flashed TWRP and I'm contemplating what GSI should I flash. The treble checker app said the phone is not Treble compatible. It also shows as A-only ARM64.
Can you please guide me on what to install or point me towards a guide?
Thank you
Click to expand...
Click to collapse
Nightwish1976 said:
@Wattsensi Hi. I'm the new owner of an old P9 (EVA-L09) and I would like to install an Android 10 GSI ROM. The only problem is it feels much more complicated than on my other phone.
Click to expand...
Click to collapse
Hello. This device is abandoned, we're pretty much 1 or 2 developers working here. Yeah, I agree about the phone being complicated. It has so many quirks compared to my Galaxy S7 where everything just works out of the box.
This phone is not newcomer friendly, but with effort you can get through.
You can indeed install an Android 10 GSI but it's a poor user experience. Your choices are limited with this device, right now we have no working camera or NFC on 10. If you don't care running an older version of Android but still secure you can try @MSe1969's LineageOS 16.0 builds which incorporate the latest security patches and are updated monthly.
That ROM is designed to be used without GApps so keep that in mind.
Nightwish1976 said:
On the P9, I managed to unlock the BL, flashed TWRP and I'm contemplating what GSI should I flash. The treble checker app said the phone is not Treble compatible. It also shows as A-only ARM64.
Can you please guide me on what to install or point me towards a guide?
Thank you
Click to expand...
Click to collapse
First of all, do you have your unlock code in hand? You will need it when you perform the needed rebranding procedure. This will reflash your phone with a Chinese ROM so you can OTA-update to Oreo, which introduces Treble functionality into the device. Rebrand, update to Oreo and flash the latest (as of 09/2020) 8.0.0.550 firmware. Then flash the needed network patches to make your radio work, and then decrypt and install TWRP.
First, go there:
https://forum.xda-developers.com/p9/development/rebrand-update-tool-hwota7-p9-eva-t3820849
The second post contains upgrade instructions and be careful. Cheers!
Updated the patch. Now NFC functionality is responsibility of the GSI and removed useless stuff.
Hello everyone.
I have decided to install a GSI on my Samsung A7 (2018) SM-A750G cos' with the stock firmware the power button does not work (but when installing a GSI the button works fine, and I have no idea why this happens XD).
The point is that I previously had a GSI installed but due to an error I bricked my phone, which led me to reinstall the stock firmware (https://www.sammobile.com/samsung/galaxy-a7-2018/firmware/#SM -A750G) using Odin, and later a GSI using TWRP. But now when I install the GSI my device remains in bootloop. It should be noted that the stock firmware does boot correctly, but the problem is exactly when installing the GSI (with the no-verity and RMM Bypass patches used).
The guides I tried are these:
[Guide] [Workings GSI] Best Treble GSI ROMS for A7 2018
Hi, I make this thread, for people who want to install GSI on A7 2018 Warning: I am not responsible for the softbrick. it is your responsibility and the warranty of the phone can be removed INSTALL FIRST,you need to find and download a stable...
forum.xda-developers.com
[GUIDE][A-ONLY][A750x] Guide on How to flash GSI (Updated: 10.06.2019)
I'm not responsible for whatever damage this could possibly cause to your device. If you appreciate the work i have done, Feel free to buy me a cup of coffee @paypal Welcome to GSI For Galaxy A7 2018 ONLY FOR A750F/A750FN/A750GN Some...
forum.xda-developers.com
And the GSIs I tried to install are these:
Release AOSP 11.0 v300.j · phhusson/treble_experimentations
Gapps variants are back! Fix camera on huawei (thanks @DarkJoker360dev ) Fix boot on some vndk 26 devices (Include libstdc++.so in vndk-sp for mali EGL) Fix keymaster (encryption) on Galaxy S9(+) F...
github.com
https://developer.android.com/topic/generic-system-image/releases (Android 10 release).
Any idea what might be happening to me? I'm really confused, cos' doing the exact same thing I managed to previously install a GSI, but now (by magic?) I can't.
Thank you very much for your help
zicdjdcvtzkpc said:
Hello everyone.
I have decided to install a GSI on my Samsung A7 (2018) SM-A750G cos' with the stock firmware the power button does not work (but when installing a GSI the button works fine, and I have no idea why this happens XD).
The point is that I previously had a GSI installed but due to an error I bricked my phone, which led me to reinstall the stock firmware (https://www.sammobile.com/samsung/galaxy-a7-2018/firmware/#SM -A750G) using Odin, and later a GSI using TWRP. But now when I install the GSI my device remains in bootloop. It should be noted that the stock firmware does boot correctly, but the problem is exactly when installing the GSI (with the no-verity and RMM Bypass patches used).
The guides I tried are these:
[Guide] [Workings GSI] Best Treble GSI ROMS for A7 2018
Hi, I make this thread, for people who want to install GSI on A7 2018 Warning: I am not responsible for the softbrick. it is your responsibility and the warranty of the phone can be removed INSTALL FIRST,you need to find and download a stable...
forum.xda-developers.com
[GUIDE][A-ONLY][A750x] Guide on How to flash GSI (Updated: 10.06.2019)
I'm not responsible for whatever damage this could possibly cause to your device. If you appreciate the work i have done, Feel free to buy me a cup of coffee @paypal Welcome to GSI For Galaxy A7 2018 ONLY FOR A750F/A750FN/A750GN Some...
forum.xda-developers.com
And the GSIs I tried to install are these:
Release AOSP 11.0 v300.j · phhusson/treble_experimentations
Gapps variants are back! Fix camera on huawei (thanks @DarkJoker360dev ) Fix boot on some vndk 26 devices (Include libstdc++.so in vndk-sp for mali EGL) Fix keymaster (encryption) on Galaxy S9(+) F...
github.com
https://developer.android.com/topic/generic-system-image/releases (Android 10 release).
Any idea what might be happening to me? I'm really confused, cos' doing the exact same thing I managed to previously install a GSI, but now (by magic?) I can't.
Thank you very much for your help
Click to expand...
Click to collapse
Hi, try install GSI from FOX Recovery, then swithch back to TWRP.
The TWRP is older, so it dont support Android 10. I had similar problems with bootloader on bit 4 for android 10.
Korny(CzE) said:
Hi, try install GSI from FOX Recovery, then swithch back to TWRP.
The TWRP is older, so it dont support Android 10. I had similar problems with bootloader on bit 4 for android 10.
Click to expand...
Click to collapse
Hi, where did you found the Fox Recovery for A7 2018? Because I can only find OrangeFox for A7 2017
theButcher03 said:
Hi, where did you found the Fox Recovery for A7 2018? Because I can only find OrangeFox for A7 2017
Click to expand...
Click to collapse
You can find it on 4 pda, and also I saw it here somewhere.
Have the same issue. Can't make it work, even when flashing with orange fox.
Is thiss quantum kernel absolutely necessary for flashing a GSI?
joaodalvi said:
Is thiss quantum kernel absolutely necessary for flashing a GSI?
Click to expand...
Click to collapse
I would like to know too. Normally one provided by the stock should be enough.
Hello and welcomeNOTICE:This thread will be modified when new files are available.
Manufacturer: Rea*me
Device: Realme C21Y
Chipset: UNISOC T610
DEVICE CODENAME: RMX3263,RMX3261,RMX3262
Currently available files:
pre-built kernel(zImage) boot.img
device-tree.dtb(device tree blob)
device-tree-source.dts(device tree source)
kernel-configuration file, sepolicy, prop.default
EDIT:finaaaaally Rea*me released the kernel source for this device, I think it is time for you to compile !
https://github.com/realme-kernel-opensource/realme_C21Y-AndroidR-kernel-source/
unfortunately as you see, there is no kernel source and also a way to unlock the bootloader, the files are somehow not very important but maybe in the future they will be.
actually, you can build any custom rom for this device using the prebuilt kernel(zImage), without kernel source by using TARGET_PREBUILT_KERNEL="Path to zImage" variable, if you understood that's good, if not just search for it, then when you got the zip file you can use sp research tool to flash the built from source rom with a locked bootloader, because it is the only way to flash this phone's files with locked bootloader, these are the instructions that you'll need to do(please note that this is a theory only, i didn't test it and i am not responsible for bricked devices, at your own risk !):
Get the phone's stock rom for example from this link: https://romprovider.com/realme-rmx3263-flash-file-firmware-free/
then install the sp research tool(you need to use this one specifically, the sp flah tool works just in the factory): https://androidmtk.com/download-spd-research-tool
Link: then using this link follow the steps until you replaced the stock system.img to the GSI's system.img one.
then just flash it using the tool and you will success to flash the GSI rom.
Next the file device-tree-sorce.dts is the device tree source file.
To get the boot.img, download the boot.zip below, extract it and you'll have it, if you want to modify boot.img download AIK tool: then run the shell script on the boot.imh file(you can do it only in Linux).
well we hope we will find a way to unlock the bootloader, because it's the key for doing everything.
Have you tried realme Deep test App to unlock the bootloader.
Hey I was thinking of flashing the proton AOSP GSI on Realme C21Y. I have checked that realme c21y has Treble SUPPORT so I thought if you can give it a try if you happen to have a realme c21y available.
Here are the links of file and tutorials that I intend to follow .
Tutorial.
GSI ROM link : https://github.com/haridhayal11/treble_proton_aosp/releases/
The problem is that you can't unlock the bootloader. Not about installing a GSI.
Mamo_grag17 said:
The problem is that you can't unlock the bootloader. Not about installing a GSI.
Click to expand...
Click to collapse
I am really sorry. I just realised it Today when I was trying to unlock the bootloader.
the IN Depth test Apk simply refused to install on my device .
BTW , PLEASE Keep on posting if you find any update on this issue
Yes
kknitesh805 said:
Have you tried realme Deep test App to unlock the bootloader.
Click to expand...
Click to collapse
Mamo_grag17 said:
Yes
Click to expand...
Click to collapse
Yes , I tried but the App refused to install.
I was able to boot my phone into FASTBOOT by using " ABD REBOOT BOOTLOADER"
fastboot command does work there but when I tried " fastboot flashing unlock"
The command failed .
The problem is that the device's community is dead. You can't find a griup or something like that to discuss.
Unfortuanately, i don't own that device anymore.
Mamo_grag17 said:
The problem is that the device's community is dead. You can't find a griup or something like that to discuss th
wwi
Unfortunately, i don't own that device anymore.
Click to expand...
Click to collapse
Yeah...I guess you're right.
It was a bad decision to buy THIS smartphone.
Unlocking the bootloader requires a key from the company.
I'll give you an advice: don't buy realme,vivo,oppo or whatever company exept samsung , xiaomi oneplus if you plan to install a custom rom...
I have a galaxy a20e and it is awesome i am using android 12.1 now (ofc custom rom)
Mamo_grag17 said:
Unlocking the bootloader requires a key from the company
I'll give you an advice: don't buy realme are if you plan to install a custom rom...
I have a galaxy a20e and it is awesome i am using android 12.1 now (ofc custom rom)
Click to expand...
Click to collapse
Yes, I will take care of I buy a new smartphone in future.
kknitesh805 said:
Yeah...I guess you're right.
It was a bad decision to buy THIS smartphone.
Click to expand...
Click to collapse
Yes it is
kknitesh805 said:
Hey I was thinking of flashing the proton AOSP GSI on Realme C21Y. I have checked that realme c21y has Treble SUPPORT so I thought if you can give it a try if you happen to have a realme c21y available.
Here are the links of file and tutorials that I intend to follow .
Tutorial.
GSI ROM link : https://github.com/haridhayal11/treble_proton_aosp/releases/
Click to expand...
Click to collapse
We are our colleagues 4pda We were able to make a tutorial on the firmware gsi rom all fully working, even the firmware works through adb
Tutorial: Mod edit: 4pda link removed.
mamograg said:
Yes it is
Click to expand...
Click to collapse
Have you tried the new method to install GSI on realme c21y mentioned on 4pda.to website..
They told to change the boot file...
But I am not sure...whether it is safe or not ...
I mean what if the file is compromised..
kknitesh805 said:
Have you tried the new method to install GSI on realme c21y mentioned on 4pda.to website..
They told to change the boot file...
But I am not sure...whether it is safe or not ...
I mean what if the file is compromised..
Click to expand...
Click to collapse
I am one of those people who is the developer of the method, it is COMPLETELY SAFE, of course there are a lot of different tests, and lately we have almost completed twrp.
leanord said:
I am one of those people who is the developer of the method, it is COMPLETELY SAFE, of course there are a lot of different tests, and lately we have almost completed twrp.
Click to expand...
Click to collapse
Thanks for the reply,
One more question, why is that every GSI that is loaded by this method has some kind of audio problem..
Without audio , this is almost a deal breaker....
Is there any method to use headphones on booted GSIs ??
kknitesh805 said:
Thanks for the reply,
One more question, why is that every GSI that is loaded by this method has some kind of audio problem..
Without audio , this is almost a deal breaker....
Is there any method to use headphones on booted GSIs ??
Click to expand...
Click to collapse
Greetings, the problem with the headphones is partly related to the vendor, which is natural for A11, but for A12 and A13 it is not yet available, or rather it needs to be updated for this, which is comparable to know very well Same Kotlin.
kknitesh805 said:
Have you tried the new method to install GSI on realme c21y mentioned on 4pda.to website..
They told to change the boot file...
But I am not sure...whether it is safe or not ...
I mean what if the file is compromised..
Click to expand...
Click to collapse
I don't own this device anymore, i tried all what i can to unlock bootloader and customize phone, but that was 8 months ago, i don't know if there are some new methods.
leanord said:
Greetings, the problem with the headphones is partly related to the vendor, which is natural for A11, but for A12 and A13 it is not yet available, or rather it needs to be updated for this, which is comparable to know very well Same Kotlin.
Click to expand...
Click to collapse
Hello, brightness fix module link is broken, can you share it again?
Luuukiee said:
Hello, brightness fix module link is broken, can you share it again?
Click to expand...
Click to collapse
Will earphone work with GSI and also...will i be able to control brightness manually