Database Info

Oneplus one bricked twrp not loading and no rom installed

Hello everyone!
I am new here and really looking forward for some answers. I own oneplus one and had a good experience with it. I had upgraded to custom rom that is lineage os 14.1
I wanted to upgrade it to 15.1 through Twrp. I followed the same procedure as i did for last flashing. I wiped the old data and everything and started to flash new rom. But this time twrp was giving an error. When I did research on that i found that i needed to upgrade to newer version of twrp to install lineage os 15.1
I did the same. And then end of it I just unselected the Supersu root and it reboots. Now when I go to the twrp recovery. The oneplus icon shows but then nothing happens. My phone now doesn't have a rom and twrp recovery won't open. When I connect it to my laptop through fastboot, cmd doesn't recognizes the device. I don't have any knowledge about tech and stuff. And I might have done something wrong. Please help me with some solutions

First of all, try to reinstall TWRP trough fastboot (boot in bootloader mode with Volume UP + power), just google a guide if you don't know how fastboot works. also be sure to use the correct twrp for bacon
After that you should be able to boot back in recovery and flash your rom
if still it doesn't work, follow this guide
https://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851

Sometimes it happens we brick our phones but No worries as long as you can go to fastboot you can always restore back to how it was before.
Either use the Program the guy above provided or this guide:
https://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541

I want to know how to flash the twrp again through fastboot, because when I connect it, phone is not detected in cmd. It says no fastboot devices are there. But then I checked and it says some android thing is connected in device manager. I hope it is my Oneplus one. How to pass this step?

It's the android drivers. Make sure you have the drivers installed.

Thank you so much. I was able to download the twrp again and flashed the 14.1 lineage os. The latest twrp is not flashing in the phone i don't know why and because of that 15.1 lineage os is not flashing and shows error. But still it's a relief that my phone is working. Also, when i switch on the camera it's not working and the flashlight icon also is dim and doesn't gets clicked and not works.

My OP 7 PRO(GM21AA) is being completely stuck at Fastboot.

Hey,
It's been always a huge headache since when the Android 10 beta and stables updates are out to root and install twrp. I've tried almost every way possible but every-time, end up being stuck at TWRP or being half way rooted. This time I've tried doing that again :
* I was at OxygenOs Android 10 stable version,
* My bootloader was unlocked as well as OEM unlocking and usb debugging was on,
* I turned my phone into fastboot, and flash the twrp image as:
fastboot flash boot file.img
Then after my phone booted into TWRP since once or twice showing that 0mb internal storage, I flashed the Magisk.zip from adb command, and rebooted it.
Since then, my phone is completely stucked at fastboot, I've tried and followed almost every xda suggestion and everything, I've tried flashing flash.bat file, I've tried flashing stock recovery, In fact I've tried flashing complete fastboot Rom (with all in one app)and it everytime boots me into Fatboot.
Please, help me out guys. I'm stressed out of this problem since yesterday's night.
Let me know your suggestions.

Maybe THIS can help you?

Actually this thread helped me just now in the same situation:
https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
That thread Jonsat mentioned didn't help me either, at all. Its not very clear that thread, telling in the thread to unbrick a OP7 to look at the thread of the OP6, there send them to OP5 and so on, eventually having to use a short written manual for the OP3 which mentions different versions and so on, its not the best for inexperienced people like me, it just send me on a wild chase downloading drivers and other things that eventually didnt work at all. Maybe I will try to rewrite it, as soon as I have enough experience to do so, i own this device for just a week.

Next time, read before you peform the install steps. It's nowhere like the older devices due to the A/B Recovery.
1. Use MSM Downloader to put you back to stock.
2. Upgrade to Android 10
3. Factory Reset to Clean out your phone (don't forget to unlock bootloader)
4. Initialize phone
5. Boot twrp (specific to Android Q + OP7 Pro)
6. Install TWRP and Magisk from TWRP
7. reboot and enjoy your rooted phone

lloydlim996 said:
Next time, read before you peform the install steps. It's nowhere like the older devices due to the A/B Recovery.
1. Use MSM Downloader to put you back to stock.
2. Upgrade to Android 10
3. Factory Reset to Clean out your phone (don't forget to unlock bootloader)
4. Initialize phone
5. Boot twrp (specific to Android Q + OP7 Pro)
6. Install TWRP and Magisk from TWRP
7. reboot and enjoy your rooted phone
Click to expand...
Click to collapse
What is MSM download tool? I'm going to try using All in One.
On searching for MSM tool, I found https://www.techoxygen.com/msm-download-tool/ is that correct?
Scratch this, MSMdownload is part of zip, I'll read through https://forum.xda-developers.com/showpost.php?p=79972789&postcount=50 and see how it goes

Can't reboot to Recovery after upgrade to Android 10

Hello everyone,
As I mentioned in the title, since I upgraded to Android 10, can't boot to recovery.
Dowloaded latest version of the Adb kit, and while issuing
adb reboot recovery
the phone reboots but goes to normal boot.
Tried manually (power + vol down etc.) and when choosing Recovery - same thing happens.
Needless to say that my laptop is authorized debug device and phone is in debug mode etc. - I have done this many times before Android 10 update.
All I try to do is to sideload the latest OTA as I did many times before because my phone is rooted and the updates do not install automatically.
Pixel (First generation)
Rooted with Magisk
Bootloader unlocked
Stock recovery (using TWRP without installing it when flashing Magisk)
Hope somebody can advise. Obviously there is something new in Android 10 which has to be set (like the need for debugging authorization for example, which I already did).
Thank you
John

Im getting a similar problem. I get stuck on th Google logo screen. I cant hard-reset, recovery mode or boot, the only things that works is th barcode.

Android 10 changed something in the ramdisk that you can't install TWRP directly on the phone. You have to boot it via PC using "fastboot boot <insert twrp image name>.img"

You can try installing twrp to ramdisk. Put twrp 3.3.1-0.img in your devices storage and then fastboot twrp 3.3.0-0 (disable pin etc first) then once it's booted go to advanced and select install to ramdisk and select the 3.3.1-0.img and it should install it. You may get a not enough storage error on 10/Q (I did) bit worth a punt. Make a back up first as usual, if no good flash a fresh factory.img and see if that cures it and then restore your apps/data etcfrom your Google back up (if you use it)
Good luck

junglism93 said:
You can try installing twrp to ramdisk. Put twrp 3.3.1-0.img in your devices storage and then fastboot twrp 3.3.0-0 (disable pin etc first) then once it's booted go to advanced and select install to ramdisk and select the 3.3.1-0.img and it should install it. You may get a not enough storage error on 10/Q (I did) bit worth a punt. Make a back up first as usual, if no good flash a fresh factory.img and see if that cures it and then restore your apps/data etcfrom your Google back up (if you use it)
Good luck
Click to expand...
Click to collapse
Thank you for the advice, however as I mentioned in my original post I don't want to install TWRP permanently , and the problem is that I cannot go to the stock recovery mode which has no connection to TWRP. There is something with Android 10 which changed since 9 and I'm interested to find what. Everything worked fine before the upgrade.
Also, the option to flash factory image and restore (I also have Titanium in addition to Google backup) is a too much of a hassle. I use this phone for real, not only to play with it.
Anyway, again thank you for your input.
John

Sorry mate, re read your OP. I just tried booting into the aosp recovery and got the same issue! My guess is its magisk as I could boot into the aosp recovery prior to installing it. Re flash or restore the previous boot.img or a stock boot.img and it should boot into aosp recovery again. Magisk must be installing to or patching the aosp recovery ramdisk and stopping it booting. Other than that just fastboot twrp and use that.
Edit: it's magisk, restored original images and it booted into aosp recovery first try.

I've had no problems installing TWRP 3.3.0.0 normally after using an *.img file to get TWRP started. EDIT: and booting into it.

junglism93 said:
Sorry mate, re read your OP. I just tried booting into the aosp recovery and got the same issue! My guess is its magisk as I could boot into the aosp recovery prior to installing it. Re flash or restore the previous boot.img or a stock boot.img and it should boot into aosp recovery again. Magisk must be installing to or patching the aosp recovery ramdisk and stopping it booting. Other than that just fastboot twrp and use that.
Edit: it's magisk, restored original images and it booted into aosp recovery first try.
Click to expand...
Click to collapse
You are right. I did open Magisk and from the uninstall options choosed "Restore images" (no need to do complete uninstall, which is the other option). After that I was able to boot in recovery etc. I guess this is what you meant in your PS. At the end re-flashed Magisk and all is back to normal.
I will alert the Magisk team about the issue (if they are not already aware).
Case closed.
Thanks again.
John

Master Cylinder said:
I've had no problems installing TWRP 3.3.0.0 normally after using an *.img file to get TWRP started. EDIT: and booting into it.
Click to expand...
Click to collapse
Please read my OP. I was clear that I DON'T want to install TWRP permanently and this was never the problem.
The problem is solved (kind of). See the other posts.
Thank you.
John

I thought TWRP wasn't compatible with Android 10 yet? I am seeing mixed things

aholeinthewor1d said:
I thought TWRP wasn't compatible with Android 10 yet? I am seeing mixed things
Click to expand...
Click to collapse
It works just fine.

Mzprx said:
It works just fine.
Click to expand...
Click to collapse
Are there steps for how to install somewhere? I keep reading that it's not working on the Pixel with Android 10. Thanks

aholeinthewor1d said:
Are there steps for how to install somewhere? I keep reading that it's not working on the Pixel with Android 10. Thanks
Click to expand...
Click to collapse
It is a mess. It works with Pixel (I have this one and can confirm) and supposedly Pixel 2. It won't work for brand new phones arriving with factory installed Android 10.
Read the following:
https://twrp.me/site/update/2019/10/23/twrp-and-android-10.html#
After that, if you want to try, go to the page below to find instructions for your device. Note that the list is by manufacturer, so if you are looking for Pixel, it is under Google.
https://twrp.me/Devices/
Just in case - backup and have the factory image for your phone handy in case something goes wrong. For google phones you can download the image and see instructions here:
https://developers.google.com/android/images
Note that I never installed TWRP permanently, so I can't say if the permanent installation will work (I think it should, but not sure). Typically I just load TWRP and use it to flash pakages, but at the end I'm keeping the stock recovery.
Hope this helps. Good luck.
John

Mzprx said:
It is a mess. It works with Pixel (I have this one and can confirm) and supposedly Pixel 2. It won't work for brand new phones arriving with factory installed Android 10.
Read the following:
https://twrp.me/site/update/2019/10/23/twrp-and-android-10.html#
After that, if you want to try, go to the page below to find instructions for your device. Note that the list is by manufacturer, so if you are looking for Pixel, it is under Google.
https://twrp.me/Devices/
Just in case - backup and have the factory image for your phone handy in case something goes wrong. For google phones you can download the image and see instructions here:
https://developers.google.com/android/images
Note that I never installed TWRP permanently, so I can't say if the permanent installation will work (I think it should, but not sure). Typically I just load TWRP and use it to flash pakages, but at the end I'm keeping the stock recovery.
Hope this helps. Good luck.
John
Click to expand...
Click to collapse
Thanks. Yea from what I can tell no one has had luck actually installing it on the Pixel with Android 10 yet. I'm familiar with how to fix everything if something goes wrong. I would try but others have already tried and failed. It won't install for them.

firstly, dont use whatever ****ty platform-tools you are using, get them from here.
secondly, you dont install recovery on android 10 yet, it doenst work. you have to just boot to twrp using `fastboot boot twrp.img` once you are in bootloader mode.

OP6 won't get past bootloader after upgrading from 16 to 17.1

I decided it was finally time to upgrade to the newer LineageOS 17.1 branch nightlies from my previous installation of 16, rebooted to recovery and sideloaded lineage-17.1-20201013-nightly-enchilada-signed.zip onto it from https://download.lineageos.org/enchilada .
After doing so it appears the recovery successfully updated, it has a new purple skin it didn't have before, however the actual ROM won't start. Instead it goes to fastboot mode and asks whether I want to Start/Restart/Recovery/etc, but I can only get into fastboot or recovery mode.
I've tried flashing older nightlies, but even with 20200922 the issue was still there. I did notice there was a ton of updates in that specific release so I wonder if anything is broken in there.. unfortunately that's also the oldest available nightly so without compiling my own there's no way I can test whether older ones are functional, unless someone here has an older version available perhaps.
I did notice doing adb sideload only makes it go to 47% before the phone goes to installing it, however maybe that's normal, I haven't used it in a while so I don't know for sure. I tried using ADB to push an image onto /tmp, however the new recovery only seems to have 'Apply from ADB' as option so I can't actually install it from there.
Does anyone have any ideas I could try, or perhaps an older LineageOS nightly from before 09-22 laying around somewhere? Any help or suggestions much appreciated!
PPS: Of course I forgot to mention but I also did a factory reset, but that did not help. unsure what else to try besides compiling a rom myself or trying other roms from the forums here, though I'd very much prefer having LineageOS..

I found the reason. I had to install the official Oneplus 6 ROM first, probably to get the right vendor binaries/kernel modules/drivers.
This is what I did:
- fastboot boot TWRP ( TWRP can be found here https://twrp.me/oneplus/oneplus6.html )
- wipe -> advanced wipe -> all the things (technically optional but if you want to get rid of GApps etc this is needed)
- adb sideload official OnePlus 6 'Oxygen' ROM ( https://www.oneplus.com/global/support/softwareupgrade/details?code=PM1574156173727 )
- reboot, fastboot boot TWRP
- run the 'copy partitions' zip from https://androidfilehost.com/?fid=8889791610682929240 to copy Oxygen to the other A/B partition
- Install latest build from https://download.lineageos.org/enchilada
- reboot, optionally boot TWRP again and install GApps, also optionally install TWRP, reboot, enjoy.
PS: Please note that after this you shouldn't switch A/B partition without first flashing another nightly or something over it, i.e fastboot boot twrp and install latest lineageos again, otherwise you'll end up booting the vanilla Oxygen rom

Help access internal storage from fastboot

So i tried updating my phone and rerooting but as soon as i flashed the patched image something got corrupted and its only been pain now for the last few hours. Ive been super irresponsible in not backing up my phone away from the phone so I would rather not lose everything by flashing the factory image so anything and everything helps. for context it booted into 11 fine but as soon as I touched fastboot and the latest .img files is when stuff started going south.
edit: fixed the issue another way but an answer for that question would be nice to finally have on the internet.

I'm not very clear about what you did... The regular Magisk OTA process is:
1. Uninstall Magisk.
2. Install the OTA (do not reboot).
3. Install Magisk (after OTA).
The more involved process I've used (when the Magisk backup isn't valid) is:
1. Fastboot flash the vanilla boot.
2. Fastboot boot the patched boot.
3. Install the OTA (do not reboot).
4. Install Magisk (after OTA).
If you are doing a fastboot flash or boot you need to make sure the image you are using exactly matches your system. Which is especially important for the initial install. If you boot the wrong image, rebooting will fix it. If you flash the wrong image you have to flash the right image to fix it. That's why Magisk install has you fastboot boot and install from Magisk manager, less chance of a permanent issue
If you were going from Android 10 to 11 with Magisk 20, that will be a problem.

To answer the question in the title... You cannot access user data from fastboot. But you can probably fastboot boot TWRP and use that to access your data. I've done that before, but not on this phone.

Unfortunately the only build of TWRP that anyone has posted is unable to boot on Android 11 and I've not seen any other serious effort.
Assuming you were working entirely with stock ROMs, my best recovery from an unbootable state has been to reflash the stock boot.img, then boot into recovery, and apply over ADB the full downloadable OTA zip. No data wipe occurs.

I just tried to boot TWRP and it didn't work. Odd because it shouldn't depend on anything on the device... Looks like the bootloader is rejecting it
"Error verifying the received boot.img: Invalid Parameter"

a1291762 said:
I just tried to boot TWRP and it didn't work. Odd because it shouldn't depend on anything on the device... Looks like the bootloader is rejecting it
"Error verifying the received boot.img: Invalid Parameter"
Click to expand...
Click to collapse
It does depend on what's on the device because recovery is no longer its own partition. It's part of the kernel (boot.img). This unofficial TWRP was built against Android 10. And the entire partition layout changes around with the upgrade from 10-11. So it is just not valid and won't boot.

cmstlist said:
Assuming you were working entirely with stock ROMs, my best recovery from an unbootable state has been to reflash the stock boot.img, then boot into recovery, and apply over ADB the full downloadable OTA zip. No data wipe occurs.
Click to expand...
Click to collapse
I tried to access adb in stock recovery, and it didnt work. I made a new hread specific to it here.
Cant get ADB in recovery mode, but works in live mode, and so does fastboot
On my Rooted Pixel 4a, I can use: Fastboot - I flashed the latest update firmware as well as the rooted boot image ADB Over WiFi - This is the most comnon way I connect for ADB ADB While the Android OS is running What I cannoit get woirking is...
forum.xda-developers.com
Can you see what I a doing differently or have missed that made it work for you?
on a side note...
cmstlist said:
Unfortunately the only build of TWRP that anyone has posted is unable to boot on Android 11 and I've not seen any other serious effort.
Click to expand...
Click to collapse
I have built TWRP for one of my previous devices, and i am not sure why no one has built one for A11, for our device; but i can think of a couple of reasons. Right now i have a major sprain In my right wrist/hand, so typing is one handed, and its not my dominate hand. Even if i got it to build, i would be looking for test pilots.

DiamondJohn said:
...snip...
on a side note...
I have built TWRP for one of my previous devices, and i am not sure why no one has built one for A11, for our device; but i can think of a couple of reasons. Right now i have a major sprain In my right wrist/hand, so typing is one handed, and its not my dominate hand. Even if i got it to build, i would be looking for test pilots.
Click to expand...
Click to collapse
just came across this post, which may help explain why TWRP is problematic for our device. But the thread did hint about running twrp from fastboot. (Post by cmstlist)
TWRP 3.7.0-12 for Sunfish[Testing]
[RECOVERY] TWRP 3.7.0-12 - TeamWin Recovery Project Introduction: Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and...
forum.xda-developers.com

DiamondJohn said:
I have built TWRP for one of my previous devices, and i am not sure why no one has built one for A11, for our device; but i can think of a couple of reasons. Right now i have a major sprain In my right wrist/hand, so typing is one handed, and its not my dominate hand. Even if i got it to build, i would be looking for test pilots.
Click to expand...
Click to collapse
As a software developer that's been doing embedded Linux for 20 years, it saddens me that I haven't got past app development for Android
I'd love to help get TWRP going for the Pixel 4a but probably I'd get nowhere. I can certainly test TWRP builds though. My Pixel 4a is my daily driver but it's unlocked and rooted and I've got a solid off-device backup so I'm relatively fearless with hacking

DiamondJohn said:
I tried to access adb in stock recovery, and it didnt work. I made a new hread specific to it here.
Click to expand...
Click to collapse
I was not saying you can execute arbitrary ADB commands in stock recovery. However if you have a full OTA zip and can get into stock recovery, you can choose the option on-device to flash an update over ADB according to Google's instructions. This will only work with a signed official OTA zip. But if you happen to have corrupted your stock ROM to an unbootable state, it is a possible path to get it back to bootable so you can access the contents.