Hello,
I have been searching the internet for the past 2 days to find a clear answer for this.
I have received Samsung S22 Ultra SM-S908N which stands for Korea version and when accessing through Sammobile I get stock firmware only for Korea.
My friend has the Samsung S22 Ultra SM-S908E which on Sammobile stands for Asia/Africa and he can install many countries firmware.
The question is, if both hardware are exactly the same in terms of chipset aka. Snapdragon
Is it possible to Install the SM-S908E on a SM-S908N? Did someone try this already - I am assuming the phone is still new and not much of discussion about this but probably someone did this for previous models?
In case I install firmware for the international version and didn't work, boot issue, or completely not switching on.. is it possible to revert back?
Regards,
The
zakolb said:
Hello,
I have been searching the internet for the past 2 days to find a clear answer for this.
I have received Samsung S22 Ultra SM-S908N which stands for Korea version and when accessing through Sammobile I get stock firmware only for Korea.
My friend has the Samsung S22 Ultra SM-S908E which on Sammobile stands for Asia/Africa and he can install many countries firmware.
The question is, if both hardware are exactly the same in terms of chipset aka. Snapdragon
Is it possible to Install the SM-S908E on a SM-S908N? Did someone try this already - I am assuming the phone is still new and not much of discussion about this but probably someone did this for previous models?
In case I install firmware for the international version and didn't work, boot issue, or completely not switching on.. is it possible to revert back?
Regards,
Click to expand...
Click to collapse
- 1st : you can't install the International FW into the Korean devices variants. Even both at the same chipset.
- 2nd: it's possible to revert back. You must to flash the correct FW ( Korean FW variant ) via Odin on DownloadMod.
I may be wrong but Korean version has 5G mmWave. International version doesn't have
zakolb said:
Hello,
I have been searching the internet for the past 2 days to find a clear answer for this.
I have received Samsung S22 Ultra SM-S908N which stands for Korea version and when accessing through Sammobile I get stock firmware only for Korea.
My friend has the Samsung S22 Ultra SM-S908E which on Sammobile stands for Asia/Africa and he can install many countries firmware.
The question is, if both hardware are exactly the same in terms of chipset aka. Snapdragon
Is it possible to Install the SM-S908E on a SM-S908N? Did someone try this already - I am assuming the phone is still new and not much of discussion about this but probably someone did this for previous models?
In case I install firmware for the international version and didn't work, boot issue, or completely not switching on.. is it possible to revert back?
Regards,
Click to expand...
Click to collapse
Have you had any luck with changing the firmware? I want to install a European one to my s908N but there seems to be no info on the internets...
Can i ask why you want a different firmware?
To be honest, i dont understand what the difference is between regions... i have a s908e with australian region that I use in US, theres no US region for my phone
Related
Hi,
I have a S8+ with the model SM-G955FD and was wondering if I am able to download the firmware for the model SM-G955F?
The phone was purchased outside of Australia and doesn't use the Australian (Telstra) firmware that I would like it to. I just figured they are the same phone just different model numbers so there shouldn't be any issues right? I might just lose a couple features or something but the phone should work correctly?
Thanks in advance.
Yea, the G955FD is the dual SIM Exynos variant, right?
I'm sure the dual SIM uses the same firmware as the single SIM, so you should have no worries flashing Aussie firmware.
But I would suggest you flash the XSA (Aussie unbranded) firmware, not Telstra firmware. You'll lose nothing, but you'll get faster updates.
the_scotsman said:
Yea, the G955FD is the dual SIM Exynos variant, right?
I'm sure the dual SIM uses the same firmware as the single SIM, so you should have no worries flashing Aussie firmware.
But I would suggest you flash the XSA (Aussie unbranded) firmware, not Telstra firmware. You'll lose nothing, but you'll get faster updates.
Click to expand...
Click to collapse
I thought as much, thanks so much for clarifying. I will download the XSA firmware as well.
Thanks
I'm using Metro PCS service on a Singapore XSP and experiencing some terrible 4G service. Is there anything I can do about this, looked perhaps flash smother CSC onto my 955FD?
michel5891 said:
I'm using Metro PCS service on a Singapore XSP and experiencing some terrible 4G service. Is there anything I can do about this, looked perhaps flash smother CSC onto my 955FD?
Click to expand...
Click to collapse
Flash a different baseband.
Sent from my S8+, S7 edge or S6
---------- Post added at 03:49 PM ---------- Previous post was at 03:48 PM ----------
ProbablyRaging said:
Hi,
I have a S8+ with the model SM-G955FD and was wondering if I am able to download the firmware for the model SM-G955F?
The phone was purchased outside of Australia and doesn't use the Australian (Telstra) firmware that I would like it to. I just figured they are the same phone just different model numbers so there shouldn't be any issues right? I might just lose a couple features or something but the phone should work correctly?
Thanks in advance.
Click to expand...
Click to collapse
Im running F firmware on my FD now...its the same thing.
Sent from my S8+, S7 edge or S6
ProbablyRaging said:
Hi,
I have a S8+ with the model SM-G955FD and was wondering if I am able to download the firmware for the model SM-G955F?
The phone was purchased outside of Australia and doesn't use the Australian (Telstra) firmware that I would like it to. I just figured they are the same phone just different model numbers so there shouldn't be any issues right? I might just lose a couple features or something but the phone should work correctly?
Thanks in advance.
Click to expand...
Click to collapse
The phone will work pretty much fine provided
1 - Exact Same hardware . you can use snapdaragon ROMs on Snapdragon Devices and vice versa for Exynos .
2 - Same network Bands supported . The ROM contains the programs on how to operate in different frequencey bands .
If i helped you , hit the thanks button ! :laugh:
Same probem Can you help me
Hi there I am a silly person who purchased a Galaxy S8+ from Kogan which is flashed with Emirates firmware
Its model SM-G9f55FD G955Fxxu1AQL5
No VOlte and Samsung pay etc
I need to use Telstra network (im rural but in a VOLTE area) and so I need to flash it with Australian Firmware so it gets all the local features.
I would just like to know how I know what chipset to use - I dont think its snapdragon
And where to get the firmware.
Janettef said:
Hi there I am a silly person who purchased a Galaxy S8+ from Kogan which is flashed with Emirates firmware
Its model SM-G9f55FD G955Fxxu1AQL5
No VOlte and Samsung pay etc
I need to use Telstra network (im rural but in a VOLTE area) and so I need to flash it with Australian Firmware so it gets all the local features.
I would just like to know how I know what chipset to use - I dont think its snapdragon
And where to get the firmware.
Click to expand...
Click to collapse
I don't know how you can own a device and not know whats in it lol.
Anyway it is exynos and firmwares can be found at sammobile.com
https://www.sammobile.com/firmwares/galaxy-s8-plus/SM-G955FD/
sent from my Pixel 2 XL or Note FE
Janettef said:
Hi there I am a silly person who purchased a Galaxy S8+ from Kogan which is flashed with Emirates firmware
Its model SM-G9f55FD G955Fxxu1AQL5
No VOlte and Samsung pay etc
I need to use Telstra network (im rural but in a VOLTE area) and so I need to flash it with Australian Firmware so it gets all the local features.
I would just like to know how I know what chipset to use - I dont think its snapdragon
And where to get the firmware.
Click to expand...
Click to collapse
Here's the XSA (Australia) firmware:
http://updato.com/firmware-archive-select-model?record=0C53FCC1D0CA11E7A5F9FA163EE8F90B
Flash it. Doesn't matter if your device is G955F or FD, the ROMs are exactly the same.
Does the method works with G955J SCV35 model? I'm running NTDocomo firmware on KDDI model to unlock network (single SIM) . I wan't to flash unlocked U firmware but getting scared that the phone will be bricked.
which variant do i use for galaxy s8 from japan? Sm-G955J / SVC35
Please
variant of what? you looking to stay w/Japanese or go to another region/country?
I just want to use an operator-free rom stock, but I can still use it in Japan
Thanks for help!
What's Japan use for cell svc, GSM? Exynos phone? If so pretty much any custom Exynos ROM, with the version appropriate CSC ought to work just fine.
Maybe it's out of topic, but kinda similar with my question, and the last reply is still quite recent.
I just got a used s8+ g9550 (TGY/Hongkong). I looked at Phone Info app, it comes with Hongkong PDA & CSC (G9550ZHU1AQG6), and US version of BL & CP (G955USQU1AQGL). Still on Nougat 7.0.
It works just fine here in Indonesia. But I'm afraid it won't be getting any OTA updates since I'm not living in China. Is it actually OK to mix up the firmware (AP, CSC,BL,PDA) like that? What versions are compatible with my device?
I'm totally new here. I don't even know why there're 4 firmwares for each device, and what each one of them is for. All I know CP = Modem/Baseband, BL = Bootloader. Mind to explain it to me? Thanks
Sent from my SM-N9005 using XDA Labs
JeffDC said:
What's Japan use for cell svc, GSM? Exynos phone? If so pretty much any custom Exynos ROM, with the version appropriate CSC ought to work just fine.
Click to expand...
Click to collapse
Hi, is snapdragon kddi au thanks!
tadho said:
Maybe it's out of topic, but kinda similar with my question, and the last reply is still quite recent.
I just got a used s8+ g9550 (TGY/Hongkong). I looked at Phone Info app, it comes with Hongkong PDA & CSC (G9550ZHU1AQG6), and US version of BL & AP (G955USQU1AQGL). Still on Nougat 7.0.
It works just fine here in Indonesia. But I'm afraid it won't be getting any OTA updates since I'm not living in China. Is it actually OK to mix up the firmware (AP, CSC,BL,PDA) like that? What versions are compatible with my device?
I'm totally new here. I don't even know why there're 4 firmwares for each device, and what each one of them is for. All I know AP = Modem/Baseband, BL = Bootloader. Mind to explain it to me? Thanks
Sent from my SM-N9005 using XDA Labs
Click to expand...
Click to collapse
I beleive your phone is a snapdragon processor not exynos - if it is chinese, I think there may be a way to unlock the bootloader but I am not 100% sure of that. I know that the S7 Chinese was able to be unlocked but there was a special ap you had to install in order to do it.
I know I haven't helped much but I wish you good luck...
JeffDC said:
variant of what? you looking to stay w/Japanese or go to another region/country?
Click to expand...
Click to collapse
I'm looking to go US, T-Mobile to be specific. What do you suggest?
Hi,
I was wondering if its possible to flash US unlocked firmware onto the unlocked dual sim Taiwanese variant of the Note 20 Ultra 5G (SM-N9860).
There are certain features like Samsung pay that is somewhat limited for me because its still shows the region as Taiwan.
Of course I don't want to brick my phone but wanted to see my options in terms of changing the region to a US version.
Also, just to confirm, there is no way for this 5G variant to get 5G with US carriers, correct?
Thanks
devamp22 said:
Hi,
I was wondering if its possible to flash US unlocked firmware onto the unlocked dual sim Taiwanese variant of the Note 20 Ultra 5G (SM-N9860).
There are certain features like Samsung pay that is somewhat limited for me because its still shows the region as Taiwan.
Of course I don't want to brick my phone but wanted to see my options in terms of changing the region to a US version.
Also, just to confirm, there is no way for this 5G variant to get 5G with US carriers, correct?
Thanks
Click to expand...
Click to collapse
I dont believe there is. You may be able to chop a csc together. But I'll let some one else chime in
TheMadScientist said:
I dont believe there is. You may be able to chop a csc together. But I'll let some one else chime in
Click to expand...
Click to collapse
hmmm, well I guess i will have to wait for more development on this to see what happens
devamp22 said:
hmmm, well I guess i will have to wait for more development on this to see what happens
Click to expand...
Click to collapse
Just use a VPN and make sure it's connected to somewhere in America and you should be fine.
MrMike2182 said:
Just use a VPN and make sure it's connected to somewhere in America and you should be fine.
Click to expand...
Click to collapse
VPN does nothing when the Samsung services are based on the CSC. I have PIA and Adguard but this will not work.
devamp22 said:
VPN does nothing when the Samsung services are based on the CSC. I have PIA and Adguard but this will not work.
Click to expand...
Click to collapse
Just flash a hacked up CSC there should be some around here on xda.
hey I wanted to know if it is safe to flash note 20 ultra us snapdragon version with other like korean snapdragon firmware. I know exynos firmware I can't flash on snapdragon. but if both models are snapdragon version then is it possible and safe. I mean will not brick.
please advice.
androidloveRs3104 said:
hey I wanted to know if it is safe to flash note 20 ultra us snapdragon version with other like korean snapdragon firmware. I know exynos firmware I can't flash on snapdragon. but if both models are snapdragon version then is it possible and safe. I mean will not brick.
please advice.
Click to expand...
Click to collapse
SAme question here.. can anyone help please? also can anyone help in this issue:
I am living in UK, have note 20 ultra 986U1. all 5g Bands are not active, on android 11 (UI3.1) there was a way to access to service menu and enable all 5bands. and I was using the 5G here. now, I updated, and that can not reach seavice menu to enable right 5G band. anyone has any idea what should I do? even I can not flash with UK rom, as UK rom is for Exynos, but mine is snapdragon. any other idea maybe? or other rom that works with my phone and also enabled 5G bands?
do you think if I just change the CSC , my problem will solve? if yes, which CSC I must flash and how?
I have got a Samsung Flip3 US unlocked version. Have been using it outside US with and Indian SIM card from last few months without any hiccups. With Samsung Pay working as well.
Now, with the release of 5G services here in India, I'm not sure the bands that Indian operators use are unlocked or not in this. Jio (Indian service provider) says that you're using a non-5G device.
So, I was wondering if I flash an INU firmware to my device. Will it unlock the bands and also let me get OTAs from Samsung? Maybe if someone here did this already?
(According to Jio, this phone is compatible with their 5G network. Also, checked on gsmarena, the international version has the bands that JIO supports.) Since the chipset in international and US is same, I suppose the bands are already there in the device.
Thanks in advance for your help and comments.
Hi Jatin, I don't think flashing your US flip 3 with IND firmware, will fix your problem. The IND firmware is for the F711B model, you are on the F711U1 model. I would not try that. A lot of the F7711B firmware are multi-CSC, but not for the U1 model.
Thanks for the reply, @slysurfer.
I was thinking that since both F711B and F711U1 share the same chipset (Snapdragon 888), the F711B firmware drivers will work on F711U1.
I read some other posts in here (on XDA itself) in which someone with an EUX variant flashed INU firmware to it. Not sure the EUX variant is multi-CSC or not.
jatin21 said:
Thanks for the reply, @slysurfer.
I was thinking that since both F711B and F711U1 share the same chipset (Snapdragon 888), the F711B firmware drivers will work on F711U1.
I read some other posts in here (on XDA itself) in which someone with an EUX variant flashed INU firmware to it. Not sure the EUX variant is multi-CSC or not.
Click to expand...
Click to collapse
Yes, the EUX variant is multi-CSC (to a degree) I can flash any firmware from Europe to South East Asia, but as mentioned we can't flash any firmware from US/Canada.
Big >IF< you can OEM unlock the bootloader you can install twrp and disable the vbmeta and flash a U firmware over a U1 phone and visa versa. But even if you can do all of that it probably still won't work. Personally I'd take it to my local mobile phone stall and see if they can do it.
Thankyou @beanbean50 for your answers.
Sorry for the noob question, . Earlier when Samsung used to release 2 different hardware versions of the same phone like one with Exynos and other with Snapdragon, flashing the other region ROM was not possible.
So, I was just wondering, since both the regions (US & South East Asia) has the exactly same hardware, the networks bands in both of these must only be software locked. Thus, since the US version already has the hardware, can't simply flashing a different region ROM should work.
Again, if there are some other locks that prevent this, it's not possible to flash. Just like if on paper both devices are same, the only difference they have is, they are released in different region.
Also, I checked, both are also manufactured in the Vietnam.
jatin21 said:
Thankyou @beanbean50 for your answers.
Sorry for the noob question, . Earlier when Samsung used to release 2 different hardware versions of the same phone like one with Exynos and other with Snapdragon, flashing the other region ROM was not possible.
So, I was just wondering, since both the regions (US & South East Asia) has the exactly same hardware, the networks bands in both of these must only be software locked. Thus, since the US version already has the hardware, can't simply flashing a different region ROM should work.
Again, if there are some other locks that prevent this, it's not possible to flash. Just like if on paper both devices are same, the only difference they have is, they are released in different region.
Also, I checked, both are also manufactured in the Vietnam.
Click to expand...
Click to collapse
Can you unlock the bootloader?
beanbean50 said:
Can you unlock the bootloader?
Click to expand...
Click to collapse
There is not OEM unlocking in under developer options. I have through other posts and things on how to unlock. I suppose it can't be unlocked in a straightforward like F711B can be.
I suppose this is the hard-stop that cleared my doubts.
Thanks one again, @beanbean50 for your time and answers. Really appreciated!!
P.S.: If you or someone you know have some experience unlocking a US snapdragon Samsung device bootloader, please do share. I might have to consider unlocking bootloader in the future.
Hello Guys
I recently purchased an S22 Ultra USA unlocked model - SM-S908U device in India but I am not getting any software updates. I am attaching a screenshot of the device information
Can I download? INDIAN firmware SM-S908E/INS/S908EXXU5CWEC and install it without losing my phone data? Pl help thanks in advance.
Leo
naveengoud said:
Hello Guys
I recently purchased an S22 Ultra USA unlocked model - SM-S908U device in India but I am not getting any software updates. I am attaching a screenshot of the device information
Can I download? INDIAN firmware SM-S908E/INS/S908EXXU5CWEC and install it without losing my phone data? Pl help thanks in advance.
Leo
Click to expand...
Click to collapse
Flash the HOME CSC instead of regular CSC to retain userdata
The SM-S908U is the US carrier version. The SM-S908U1 is the US non-carrier version. The former gets updates from the respective carrier. The latter gets updates direct from Samsung.
SM-S918U S23 ULTRA/918U1 UNITED STATES FIRMWARE FLASHING
Most of us already know how to flash firmware with Odin. Here, anyone can post available firmware for everyone to use as well as general discussion. U firmware can be flashed on a U1 device and U1 firmware can be flashed on a U device using Odin...
forum.xda-developers.com
naveengoud said:
Hello Guys
I recently purchased an S22 Ultra USA unlocked model - SM-S908U device in India but I am not getting any software updates. I am attaching a screenshot of the device information
Can I download? INDIAN firmware SM-S908E/INS/S908EXXU5CWEC and install it without losing my phone data? Pl help thanks in advance.
Leo
Click to expand...
Click to collapse