Hello! I have this problem after updating to miui 13. Orange fox recovery started bugging. when I want to enter the sd card, there is nothing empty there. Even all root folders became empty, I tried flashing recovery but nothing worked. I think there are people among you who have experienced these.
Zhanbo554 said:
Hello! I have this problem after updating to miui 13. Orange fox recovery started bugging. when I want to enter the sd card, there is nothing empty there. Even all root folders became empty, I tried flashing recovery but nothing worked. I think there are people among you who have experienced these.
Click to expand...
Click to collapse
Custom recoveries (TWRP, OrangeFox) cannot decrypt Android 12 internal storage at the mean time.
You will need MicroSD card or USB OTG.
pl1992aw said:
Custom recoveries (TWRP, OrangeFox) cannot decrypt Android 12 internal storage at the mean time.
You will need MicroSD card or USB OTG.
Click to expand...
Click to collapse
Thanks for answering
Related
I had issues with the last CWM release so I decided to try TWRP. I use Rom toolbox Pro to get into recovery and wiped all to flash a new rom. Problem arose when I went into" Install" program of TWRP, I could not find my SD files. I change from root to SD card and only saw twrp, cwm and upper level. I tried many ways , but could not get to the files in my SD card. Any help would be appreciated...
Check in /data/media
If your stuff isn't there its gone. If you don't have any ROM zips and you have already wiped system you will need to setup and use ADB to push one.
Sent from my SCH-I535 using Tapatalk 2
buff31 said:
I had issues with the last CWM release so I decided to try TWRP. I use Rom toolbox Pro to get into recovery and wiped all to flash a new rom. Problem arose when I went into" Install" program of TWRP, I could not find my SD files. I change from root to SD card and only saw twrp, cwm and upper level. I tried many ways , but could not get to the files in my SD card. Any help would be appreciated...
Click to expand...
Click to collapse
Have you tried formatting your SD Card with an external card reader, then loading the files?
fadac said:
Have you tried formatting your SD Card with an external card reader, then loading the files?
Click to expand...
Click to collapse
I tried an earlier version of TWRP and my SD card popped up fine in the Install section. Maybe it's me.... but I dunno the latest versions of recoveries CWM and Twrp have had bad sections....
I have the TX1541 model, 16GB ROM. I just got the device a few hours ago so here's a quick rundown of exactly what I have done with it so far.
1. Boot
2. Go through google setup
3. Install marshmallow update
4. Format Sandisk 32GB SDCard as internal storage
5. Enable Developer options, allow OEM unlock, enable USB Debugging
6. Move latest CM13 nightly and OpenGApps to internal storage using MTP
7. Boot into fastboot
8. Unlock bootloader successfully
9. Flash latest TWRP build (twrp-osprey-3.0.2-r1) successfully
10. Reboot into recovery
11. Swipe to allow TWRP to allow modifications
Now, I can't install any of the zips I moved on the device earlier because according to the log neither "storage" nor "/data" can be mounted. So obviously, if I go to Install -> Select Storage everything has "0MB" and wiping doesn't work. . Oh yeah and MTP doesn't work either so I can't really get any files on the device ATM, maybe using push in fastbooot...
I'd appreciate any help on this...
Don't wipe anything yet... Once you boot into TWRP once and allow changes to system, go to Reboot menu and reboot to Recovery again. Test to see if you can see storage now...
Encrypted?
When you format your SD card as internal, it encrypts it so that you can't use it with other phones, and it protects your data.
If you encrypted it and then installed TRWP you've essentially changed the phone, you won't be able to access it without booting into the android OS that you encrypted it on.
Hope that it wasn't what you did. Otherwise the only way in is to load it into android, connect to the computer, and get the files from there.
RylenWolf said:
When you format your SD card as internal, it encrypts it so that you can't use it with other phones, and it protects your data.
If you encrypted it and then installed TRWP you've essentially changed the phone, you won't be able to access it without booting into the android OS that you encrypted it on.
Hope that it wasn't what you did. Otherwise the only way in is to load it into android, connect to the computer, and get the files from there.
Click to expand...
Click to collapse
how do you fix it on the computer?
mjf042 said:
how do you fix it on the computer?
Click to expand...
Click to collapse
@Jisifus You need to go in twrp ans change the filesystem to ext4
mjf042 said:
how do you fix it on the computer?
Click to expand...
Click to collapse
@Jisifus You need to go in twrp ans change the filesystem to ext4
Hi
You found solution to this problem :C??
I have the same problem :crying:
This is a known issue in the official version... @Alberto97 has submitted the fixes, we just need to wait until it's merged into official build.
An unofficial build with the fixes applied is available here: https://forum.xda-developers.com//2...t/twrp-twrp-moto-g-2015-t3170537/post71386235
I am rooted and I tried Android Pie Open beta 2 for a few days and decided to go back to 5.1.11.
I installed the full rom of 5.1.11 and then installed twrp 3.2.2 then reboot to recovery.
It did not ask for my pin and shows a encrypted SD card.
I tried several ways, like load twrp.img from adb, twrp decrypt passwword, but it does not help.
I am wondering if anyone knows how to decrypt the SD card. Otherwise I have to format the SD card and start from scratch.
Thanks a lot
starfq said:
I am rooted and I tried Android Pie Open beta 2 for a few days and decided to go back to 5.1.11.
I installed the full rom of 5.1.11 and then installed twrp 3.2.2 then reboot to recovery.
It did not ask for my pin and shows a encrypted SD card.
I tried several ways, like load twrp.img from adb, twrp decrypt passwword, but it does not help.
I am wondering if anyone knows how to decrypt the SD card. Otherwise I have to format the SD card and start from scratch.
Thanks a lot
Click to expand...
Click to collapse
Ye format is the only way now that you have gone back. There is about 5 threads about this specific topic with more info if you feel you need it
I upgraded to the latest Q4 beta. When doing this following instructions when flashing in TWRP it said to flash the file from USB otg since you couldn't flash from internal storage.
my question is, once you have Q installed as I do can you never flash files from internal storage? i assume this must be the case, or i have something very wrong with what i'm doing. I can't mount my internal storage at all in TWRP or see any of the files.
knives of ice said:
I upgraded to the latest Q4 beta. When doing this following instructions when flashing in TWRP it said to flash the file from USB otg since you couldn't flash from internal storage.
my question is, once you have Q installed as I do can you never flash files from internal storage? i assume this must be the case, or i have something very wrong with what i'm doing. I can't mount my internal storage at all in TWRP or see any of the files.
Click to expand...
Click to collapse
Everything works but decryption.
We may have to wait until official q comes before decryption works.
You may find ways to run unencrypted using search function. I know it has been talked about in the forum.
twinnfamous said:
Everything works but decryption.
We may have to wait until official q comes before decryption works.
You may find ways to run unencrypted using search function. I know it has been talked about in the forum.
Click to expand...
Click to collapse
Do you have any idea what could be wrong with my install or setup? I can't mount system. It can't even see my internal sd card it lists it as 0. Never had anything like this happen
knives of ice said:
Do you have any idea what could be wrong with my install or setup? I can't mount system. It can't even see my internal sd card it lists it as 0. Never had anything like this happen
Click to expand...
Click to collapse
U can't see anything in SD card if decryption doesn't work.
What twrp and what where your steps to get where you are now?
twinnfamous said:
U can't see anything in SD card if decryption doesn't work.
What twrp and what where your steps to get where you are now?
Click to expand...
Click to collapse
yes, i know what you are saying with encryption when you can't decrypt it still shows everything with crazy decrypted numbers like 8784322qzzwerei, etc. Even if i turn off my security and boot into twrp (i'm running the latest version i believe 3.3.1-50 according to the twrp menu) it can't see anything on internal storage. when you go to select storage it shows 0mb under internal storage. if i plug in a usb otg it immediately shows and reads that.
if i want to select a file it says select file from internal storage (0 mb)
I have things installed to slot A. these slots i'm not used to using but maybe someone when it boots to twrp its not on the right slot or something? any ideas?
knives of ice said:
yes, i know what you are saying with encryption when you can't decrypt it still shows everything with crazy decrypted numbers like 8784322qzzwerei, etc. Even if i turn off my security and boot into twrp (i'm running the latest version i believe 3.3.1-50 according to the twrp menu) it can't see anything on internal storage. when you go to select storage it shows 0mb under internal storage. if i plug in a usb otg it immediately shows and reads that.
if i want to select a file it says select file from internal storage (0 mb)
I have things installed to slot A. these slots i'm not used to using but maybe someone when it boots to twrp its not on the right slot or something? any ideas?
Click to expand...
Click to collapse
Has the rom booted yet? Did u wipe? Nevermind forgot on q it just shows 0mb
U can try switching slots but it might put u back to rom u had before.
As was previously stated, TWRP cannot decrypt data on q. TWRP will have to be updated to address this. It will be the same for everyone.
Once you boot into rom, all your data will be accessible.
Maybe try fastboot boot twrp.img as that may allow decryption
miffymiffy said:
As was previously stated, TWRP cannot decrypt data on q. TWRP will have to be updated to address this. It will be the same for everyone.
Once you boot into rom, all your data will be accessible.
Maybe try fastboot boot twrp.img as that may allow decryption
Click to expand...
Click to collapse
even if i remove all encryption from my device the system still shows at 0mb. which means you can't flash anything in twrp from the sd card.
i'm trying to figure out why i can't get magisk vanced to work and i assume it is because the flashing in magisk isn't occurring correctly.
so does everyone show a system in twrp for q at 0mb? if what i have is normal and the norm, fine but that was the reason for this thread to list the differences/limitations of twrp in q.
I believe TWRP can't access the internal sdcard due to the change in Q called Scoped Storage:
https://developer.android.com/preview/privacy/scoped-storage
This is also why Magisk vanced isn't installing properly
docnok63 said:
I believe TWRP can't access the internal sdcard due to the change in Q called Scoped Storage:
https://developer.android.com/preview/privacy/scoped-storage
This is also why Magisk vanced isn't installing properly
Click to expand...
Click to collapse
i agree.
the problem is, some are reporting no problems with youtube vanced through magisk. others are claiming that they can see the data on their sd card. i have no idea, maybe some of these people don't even have the q beta installed.
knives of ice said:
i agree.
the problem is, some are reporting no problems with youtube vanced through magisk. others are claiming that they can see the data on their sd card. i have no idea, maybe some of these people don't even have the q beta installed.
Click to expand...
Click to collapse
I've been on DP2, 3, and now 4 and never been able to see internal in TWRP. All flashes have had to be done via OTG after the initial Q install.
docnok63 said:
I've been on DP2, 3, and now 4 and never been able to see internal in TWRP. All flashes have had to be done via OTG after the initial Q install.
Click to expand...
Click to collapse
ok awesome, thanks for confirming. have no idea what some are claiming in the ver 4 thread.
have you found a way to get youtube vanced working? even the non rooted version force closes for me. that is the one thing in my routine that is tough to live without.
knives of ice said:
ok awesome, thanks for confirming. have no idea what some are claiming in the ver 4 thread.
have you found a way to get youtube vanced working? even the non rooted version force closes for me. that is the one thing in my routine that is tough to live without.
Click to expand...
Click to collapse
I have YouTube Premium so I don't mess with vanced. Sorry...
knives of ice said:
ok awesome, thanks for confirming. have no idea what some are claiming in the ver 4 thread.
have you found a way to get youtube vanced working? even the non rooted version force closes for me. that is the one thing in my routine that is tough to live without.
Click to expand...
Click to collapse
Because if your run your device unecrypted you can access the data partitions in TWRP while running Q.
Namolas said:
Because if your run your device unecrypted you can access the data partitions in TWRP while running Q.
Click to expand...
Click to collapse
i remove all fingerprints/pins and have no security. i should be able to boot into TWRP and see data then correct?
it still shows 0mb for me and won't mount.
knives of ice said:
i remove all fingerprints/pins and have no security. i should be able to boot into TWRP and see data then correct?
it still shows 0mb for me and won't mount.
Click to expand...
Click to collapse
Currently decrypted state, and running the device unencrypted aren't the same. Even with your fingerprints pins removed if you look in Settings/Security you'll see your device still shows as encrypted.
OnePlus 7 forces encryption by default. To run your device unencrypted you have to format the internal storage (wipes everything pictures media etc) and make sure you flash a special disable force encrypt zip every time you flash anything system related in TWRP.
Its a lengthy process to get it running unencrypted and if you forget to flash the special script even one time OP7P will force encrypt on boot and you have to start over. Its not for everybody but I know a lot of people running this way, myself included.
This should all be fixed with and update to TWRP but who knows how long that will take.
Not sure if this is worth anything or not, but it's decryption related: https://gist.github.com/mauronofrio/af29bad34ad87a1a957d193794f0bf5f
Namolas said:
Currently decrypted state, and running the device unencrypted aren't the same. Even with your fingerprints pins removed if you look in Settings/Security you'll see your device still shows as encrypted.
OnePlus 7 forces encryption by default. To run your device unencrypted you have to format the internal storage (wipes everything pictures media etc) and make sure you flash a special disable force encrypt zip every time you flash anything system related in TWRP.
Its a lengthy process to get it running unencrypted and if you forget to flash the special script even one time OP7P will force encrypt on boot and you have to start over. Its not for everybody but I know a lot of people running this way, myself included.
This should all be fixed with and update to TWRP but who knows how long that will take.
Click to expand...
Click to collapse
Thanks for your post.
So if I want to "dirty flash" a rom on android q, is it still possible with data encrypted or should I format internal storage anyway ? (and clean flash...)
Gabrech said:
Thanks for your post.
So if I want to "dirty flash" a rom on android q, is it still possible with data encrypted or should I format internal storage anyway ? (and clean flash...)
Click to expand...
Click to collapse
On my Pixel (original) with TWRP 3.3.0-0 and Q, I am able to do everything normally, including decrypting, dirty flash, cutstom ROMs, factory, nandroids, etc .... However, /system and /vendor won't mount. But, it works anyway!
The scoped storage is still a pain in the butt.
I have ArrowOS 12 installed, with 11 the updates went well but now if I try to update i get the messages in the title. I tried to repair the filesystem, changed it from ext4 to ext2 and ext4 back again, wipe basically everything, can't restore anything, really have no idea of what I should do more.
TWRP is on 3.5.2_11.0, I have no personal files on the phone so anything is ok.
sherlockhs03 said:
I have ArrowOS 12 installed, with 11 the updates went well but now if I try to update i get the messages in the title. I tried to repair the filesystem, changed it from ext4 to ext2 and ext4 back again, wipe basically everything, can't restore anything, really have no idea of what I should do more.
TWRP is on 3.5.2_11.0, I have no personal files on the phone so anything is ok.
Click to expand...
Click to collapse
All custom recoveries (TWRP, OrangeFox) cannot decrypt Android 12 data in the meantime, so you will not see any internal storage and cannot mount.
If you want your data, you can try ArrowOS 11, restore data into ArrowOS 11, make sure data works in ArrowOS 11 system boot, then flash ArrowOS 12 without format data.
Some said you can do that, but there's chance it will fail, but since your phone has no personal files, you can try.
There is update of TWRP 3.6.0_11.0
pl1992aw said:
All custom recoveries (TWRP, OrangeFox) cannot decrypt Android 12 data in the meantime, so you will not see any internal storage and cannot mount.
If you want your data, you can try ArrowOS 11, restore data into ArrowOS 11, make sure data works in ArrowOS 11 system boot, then flash ArrowOS 12 without format data.
Some said you can do that, but there's chance it will fail, but since your phone has no personal files, you can try.
There is update of TWRP 3.6.0_11.0
Click to expand...
Click to collapse
Thanks man, does this mean there is no effective way to update the OS on android 12 in any way, no custom roms at least? In that case I'm very confused as to why the update button even is there
sherlockhs03 said:
Thanks man, does this mean there is no effective way to update the OS on android 12 in any way, no custom roms at least? In that case I'm very confused as to why the update button even is there
Click to expand...
Click to collapse
Custom recoveries cannot decrypt internal storage, but can read microSD cards and USB OTG. Remember Poco X3 Pro has microSD slot.
You can also use ADB sideload command in custom recoveries to flash zip files, so ROM updates can be installed this way.
Almost all function of custom recoveries are working, except decrypting internal storage.
pl1992aw said:
Custom recoveries cannot decrypt internal storage, but can read microSD cards and USB OTG. Remember Poco X3 Pro has microSD slot.
You can also use ADB sideload command in custom recoveries to flash zip files, so ROM updates can be installed this way.
Almost all function of custom recoveries are working, except decrypting internal storage.
Click to expand...
Click to collapse
alright, thanks a lot, have a good one