Hard Bricked Xiaomi Redmi 6 - Xiaomi Redmi 6 Questions & Answers

So yesterday i wanted to charge my phone cause it died, before charging it i dropped it by accident and when i tried to charge it it gave no response (just the white led, i couldn't turn it on, there wasn't any vibration).
I waited for several hours for it to charge but nothing, i started to try to flash it, the problem is that the phone doesn't appear on "devices" in windows, it's not even unrecognized cause that's another problem but the device appears (tried different usb cables and installed drivers in a bunch of ways).
Connecting it just turns on the white led, pressing button combinations does nothing, and it isn't the screen cause there's not even vibrations from when u turn it on or something, every input does nothing.
is it over?

Try to open your phone?

Related

HTC sensation XE not turning on and no charge light

So today I was using my phone and then i could turn the screen back on. So i pulled out the battery and tried to turn it back on, however it didnt work. I tried plugging in the charger, but there wasn't any orange charging light (it was on around 60-50% battery when it stopped working). I tried connecting it to a pc, but there was nothing, i couldnt access the sd card and there was nothing on the device manager. I tried doing the volume down and power button and other stuff, after a while i managed to get the phone to boot up but it died before it made it to the lock screen (not charging). Is there away to fix it?
paralyse said:
So today I was using my phone and then i could turn the screen back on. So i pulled out the battery and tried to turn it back on, however it didnt work. I tried plugging in the charger, but there wasn't any orange charging light (it was on around 60-50% battery when it stopped working). I tried connecting it to a pc, but there was nothing, i couldnt access the sd card and there was nothing on the device manager. I tried doing the volume down and power button and other stuff, after a while i managed to get the phone to boot up but it died before it made it to the lock screen (not charging). Is there away to fix it?
Click to expand...
Click to collapse
Try removing your battery and then plug in the cable connected to PC USB. I would also try doing the same with a unix based system, just to be sure that there are no driver issues(though windows should at least show an unrecognised device in device manager).
Also, can you keep it on charge for some time and see if the phone feels a bit hot...? If not, it seems to be hardware fault.
paralyse said:
So today I was using my phone and then i could turn the screen back on. So i pulled out the battery and tried to turn it back on, however it didnt work. I tried plugging in the charger, but there wasn't any orange charging light (it was on around 60-50% battery when it stopped working). I tried connecting it to a pc, but there was nothing, i couldnt access the sd card and there was nothing on the device manager. I tried doing the volume down and power button and other stuff, after a while i managed to get the phone to boot up but it died before it made it to the lock screen (not charging). Is there away to fix it?
Click to expand...
Click to collapse
Maybe your phone is bricked,but the way you explained it seems like a hardware problem !
Do you have warranty ?

OnePlus One dead!!!

Hey guys,
i have a really big problem with my lovely one.
Before three hours i checked my screen the last time, everything cool,
70 percent battery, no problem everything working like its usual.
But ut now i tried to get it out off stand by but it isnt showing any reaction.
I tried to double tap wake up, normal stand by button wake up, wake up through
connecting to my original oneplus charger/cable nothing happened and at least
connecting it to my mac. And off course i tried to do volume down stand by button and so on.
It won´t even show the notification led when i am pluging it in, please help me guys,
what happened to my phone? Can i rescue it?
Try holding the power button until it reboots (max. 60sec). If that does not work, connect it to a charger and just let it charge for up to 24h (until it show something).
Tried it, didn´t worked.
Now i am trying to charge it for a day.
:/
First try to connect to a win PC and if nothing happens press POWER+VolUp for 30 secs (until vibrate), maybe it somehow bricked itself. If it connects as QHSUSB_BULK it bricked itself (can be fixed)
Okay tried to connect it on my other computer. It didn´t showed any led light on my device but the pc tried to search a driver software but no luck. Paralel i tried to connect the opo from my brother, no problem everything cool. But mine is somehow, dead.
And the volume up and stand by didnt helped :/
Leave the phone connected to an AC charger for 24 hours, do not touch it at all during this time, after 24 hours try to turn it on again.
Transmitted via Bacon
See a lot of these
What causes this problem with the OPO?
Its comforting to know that it can be recovered from most everything thrown at it though.
oODMASTEROo said:
Okay tried to connect it on my other computer. It didn´t showed any led light on my device but the pc tried to search a driver software but no luck. Paralel i tried to connect the opo from my brother, no problem everything cool. But mine is somehow, dead.
And the volume up and stand by didnt helped :/
Click to expand...
Click to collapse
What was the name of the device it was searching the driver for?
It didn´t told me just searching driver software for usb device. Nothing more

Moto G XT1032 - Can access Fastboot, but it wouldn't work - Bricked?

Hi. First of all, thanks for taking the time to read this. I know it's a long post, I'm just trying to be as detailed as possible.
I've a Moto G XT-1032 that stopped working a couple days ago. It has the original battery, original software. It didn't came with an original charger, so I have been using a Samsung Galaxy Tab one. The phone is almost two years old.
This is how it all started: It had low battery. When I got home it connected itself to the wi fi, and tons of whatsapp messages came at the same time. It went off.
I thought maybe it had drained the battery. Plugged it in to charge, didn't get the led on, and the battery showed 0% for an instant. Then the phone turned itself on, got the M logo and then the screen went black (like... some sort of backlight is on, but the screen is just black)
I turn it off, and it goes back on. No battery image, straight to the M logo, and then black screen. I tried holding power + vol down keys for more than 120 secs, finger pain is the only I got. It can access fastboot mode, but doesn't matter which option I pick, normal powerup, recovery, factory... I select them and then press vol up, but it just goes to the white screen with the M logo, then black screen.
When I plug the charger, and go to fastboot mode, it doesn't show battery charging. Just says battery low (or battery ok). When I plug it to the computer via the usb cable, and access fastboot, it shows battery charging.
The computer doesn't detect the device at all. First time I plugged it, it tried to install drivers, but failed. I downloaded them from motorola's page.
If I open motorola device manager, it tells me there aren't updates for my phone... So... I guess it's recognizing it? But I still can't see it. Windows only shows me my C and D drives, but not the phone. Tried different usb cables, different usb ports. Nothing changes.
I sent it to a service, they tested the battery and charging port, they said those were fine. But didn't find the problem.
Any ideas? Suggestions?
Thanks in advance!

[Help] Huawei Y520 keeps vibrating, no boot

Good Day
My phone Huawei Y520-u22 doesn't boot up. If you plugged in in a USB, any usb with power like from computer or wall charger, it just keep vibrating, even if I removed the battery.
When I tried plugging in my computer, I'm seeing that it recognized my phone, but in less than 1 sec, it just disappear, then it reappear then it disappear, it is also simultaneously vibrating.
I already tried Botting it in Recovery or Fastboot but it won't.
I already tried opening the phone and cleaning the power button and tried also the brutal clicking the power while usb is on.
Im short, ifnthebvibrate doesn't stop during thenusb plugged in,I cant do anything.
i have the same issue in my phone..did anybody find something about this issue
y52 u22
when i put bettery my phone start vibrating and wont on just black screen...never stop vibrating untill i removed bettery it stop and when i plug in charger without bettery it also vibrate please help me

My honor 4C doesn't charge and the led flashed Red Green Green 3 times but no power

When I connect it to the charger it glows red green green and repeats for 2 times after. If I connect it to the PC and turn it on, the PC makes a connected device sound but still it doesn't turn on. Anyone here knows what it is? Is it bricked?
No clue and found little on a Google search.
If you can easily disconnect the battery, try that.
Better if you can command it to do a hard reboot.
A hard reboot can sometimes resolve issues.
May be a hardware failure.

Categories

Resources