Hey there, I am a photographer which has a Samsung S10e, and I've been trying to watch photos on my phone from my Camera's SD card using a Transcend SD Card reader and Samsung's USB to TYPE C connector. It was working fine beforehand, but now it just keeps showing a notification with "USB Connector connected" and then "USB Connector disconnected" in an infinite loop, Even if I really do disconnect it, it keeps showing this error until I restart.
Any ideas on fixing it?
Related
I was recently staying with some mates and tried connecting my HTC Legend to their laptop to transfer files, but the Legend did not recognize it was connected to a computer, just had the charging icon as if the cord was plugged into power.
I have the 'Default connection type' as Disk Drive, 'Ask me' each time option enabled.
On the computer, no autoplay or anything happens like it used to. I can see a removable disk drive, but it has the "Please insert a disk into drive X" error when I try open it.
I can access the SD card and everything fine through the phone..
Anyone know what's up?
Cheers
EDIT: Stock unrooted Legend
EDIT: Nevermind, rebooted phone and it works now.. sorry
This exact same thing started happening to me last night as well. I can see the drives in "My Computer", but they are greyed out and give me the "Insert drive to continue" error message. What gives?
usb
howzit guys
have you'l tried switching the phone off and then on again?
i've had this happen few times
its normally some app causing it not to popup or to be very slow in popping up
wait awhile.if still nothing then try switch off and then on and then connect the usb to the pc
So this is the first android phone I have had where it is a royal pita to connect via USB. I have to disconnect and reconnect it a few times before it actually decides to connect. Once I do get it connected it refuses to let me unmount the sdcard volume. I keep on ejecting it but it keeps on re-appearing. And of course I can just disconnect it without a clean dismount but that is just wrong ...
Anyone else having issues ejecting the Droid Charge after connecting?
Mine does the same thing. I haven't found a way to eject it properly, but I'm a Mac noob.
I have my Charge set to act as Mass Storage when it detects a USB connection.
Go to: Settings > USB Settings> Mass Storage
Now, whenever you connect it to the Mac (or Windows box), the Notification bar will say that USB is connected. Select that Notification. Hit "Connect USB Storage" button on that screen and you shouldn't fail to mount. If you do, check your cable--it might be bad/going bad/un-plugged...
As far as ejecting the SD card, don't worry about it. There is no clean way to un-mount it. Just yank the cord. Issues will only occur if you do that while it's transferring stuff.
This morning my Charge started having really weird issues...the media scanner would run, then report that the USB Cable is connected & debugging was enabled, but no cable was connected. Then it would detect the SD card, run media scanner and start the whole thing over again.
I did a fresh Odin restore and the same thing happened. It would stop with USB debugging disabled, but then I can't use things like TI Backup. So I swapped in a spare 4GB card I had and it seems to be working fine with USB debugging enabled.
Could this be caused by anything else other than a bad SD card?
Hello.
Short story: my phone was a little wet and i have some issues with it, mostly i want to get a mass storage to get working. (cant root)
Basically at first the phone didn't even want to charge, when i connected it to the PC windows was giving me an error that the device cannot be recognized, and couldn't install the drivers. (i had Kies installed)
I dried it completely, now the phone turns on without any problem, when i connect it to the pc the phone is recognizing connection (i hear sound + the button backlights are firing up for a sec)
Homever, windows is not detecting any USB device at all, and in about phone/info it says the phone is connected to the AC instead of USB.
When i connect it with USB there is no dropdown in notification to choose from charging, storage etc.
There is also manual usb storage mounting under settings/communication/usb settings , when i'm trying to mount here it just says to connect the phone with usb cable (not detecting connection, homever the backlight + sound is here after connecting, and it's charging)
I tried connecting it with usb debugging on/off even tried to fiddle with in service menu (*#7284#) but nothing.
And since i cannot get the usb storage working basically i cannot flash anything or root it.
Also the USB cable is not a Samsung but an HTC one, could this be a problem? (people in different thread said those cables are the same so it shouldnt be a problem, same amperage, same stick etc.)
Even tried to install MountUSB Widget from market, but it doesn't work when im trying to start the app it's force closing, when i make widget on desktop and press it the phone just vibrate for 1 sec and nothing happens.
When i connect phone with Kies AIR and it works, i mean it shows the storage information, also recognize the phone model correctly, how much free space i have on internal and on SD card but i cannot click "show in explorer" it's greyed out.
Any experts out there could help me? :crying:
Just a blind guess, try a USB cable which supports your device. If it doesn't help, I'm afraid it's a hardware problem and you will have to consult some hardware expert.
Hi all, I have an Android T95Z Plus box - It's not working basically.
When connected to TV, nothing apart from the lights changing colors.
I have tried connecting it to the PC so I can maybe re-flash the box, but when I plug it in, the PC makes the sound of something being plugged in then around 10 seconds later, makes the sound of it being unplugged.
I also have tried plugging a USB card reader into the PC with a Micro SD inside, PC recognizes it as a mass storage device, but cannot do anything with it, it also doesn't show up in 'MY Computer'
Does anyone have any ideas or advice?
Thanks,
Chris.
If anyone else has this issue - I forgot to post how I sorted it. It works now for me by plugging in a USB cable into it and plugging that into a USB plug (phone charger plug)
Hope it helps if anyone else has the issue.
I have the same issue can you give solution