I have a hard bricked OP9 and have tried alot of different guides from here or other ressources.
The problem is somewhere in the process something is not supported and the how to dies there.
MSM download tool prompts that says "Packed image not exists!"
OP9 LE2113 version (EU Version i guess)
Phone is black screen and can not be detected through ADB or fastboot. Either through the Qualcomm HS-USB QDloader 9008 Drivers.
Before it bricked it was unlocked (bootloader) Not sure it is anymore
Can someone send me a link or guide that can guide me the right direction?
Try the Oneplus 9 Pro India recovery tool. I know it doesnt make sense, but its the only thing that has worked for many, including myself and I have a OP9 5G North America.
Once recovered, the OS will boot but buggy. You can then restore to correct image via twrp full zip
Ill try that this evening, ill let u know ill turn out.
I typically run into sahara connection because i dont have connection through ADB of fastboot
#gorilla p
Try the Oneplus 9 Pro India recovery tool. I know it doesnt make sense, but its the only thing that has worked for many, including myself and I have a OP9 5G North America.
Once recovered, the OS will boot but buggy. You can then restore to correct image via twrp full zip
Click to expand...
Click to collapse
i have used this link
https://onepluscommunityserver.com/list/Unbrick_Tools/OnePlus_9_Pro/ India version
And at the moment it is booting.
Unticked reboot and SHA check, This is indeed a good day !
Ive got a working phone again,
I will mark this thread as solved
Related
I have an extremely big problem, maybe someone could help me here?
So today I tried to flash diffrent OOS version on my OnePlus 9, I did it with fastboot, after the command "fastboot reboot fastboot" the screen on the phone went blank and there was a sound on the computer as if the phone was still connecting and disconnecting. Now, the phone does not respond to the buttons, the charger, I cannot enter the fastboot, only the EDL mode works, but I cannot use the MSM because it does not detect the phone, I get the "sahara communication failed" notification all the time, previously the same MSM version was working.
Probably the most important thing is that it turned out that the OOS I tried to flash was actually ColorOS, I didn't pay attention to it, I don't know how it happened.
I feel like an idiot, I'm afraid that I will not save this phone myself and that the repair service will also not accept it under warranty, any suggestions?
MSM cannot recognize your phone aka. Sahara Connection error? Check this.
Hi! Today i successfully bricked my OP9 to the point where the global MSM tool couldn't recognize it anymore. I tried everything, from different MSM tools to this thread. Nothing. Then, Deus ex Machina, @flameteam recommended me to try...
forum.xda-developers.com
Rayekk said:
I have an extremely big problem, maybe someone could help me here?
So today I tried to flash diffrent OOS version on my OnePlus 9, I did it with fastboot, after the command "fastboot reboot fastboot" the screen on the phone went blank and there was a sound on the computer as if the phone was still connecting and disconnecting. Now, the phone does not respond to the buttons, the charger, I cannot enter the fastboot, only the EDL mode works, but I cannot use the MSM because it does not detect the phone, I get the "sahara communication failed" notification all the time, previously the same MSM version was working.
Probably the most important thing is that it turned out that the OOS I tried to flash was actually ColorOS, I didn't pay attention to it, I don't know how it happened.
I feel like an idiot, I'm afraid that I will not save this phone myself and that the repair service will also not accept it under warranty, any suggestions?
Click to expand...
Click to collapse
See link below. Worked for me I was in same position.
ctonylee1965 said:
See link below. Worked for me I was in same position.
Click to expand...
Click to collapse
Thank you very much! Tbh I can't understand how and why it works, but it worked!
Rayekk said:
Thank you very much! Tbh I can't understand how and why it works, but it worked!
Click to expand...
Click to collapse
Make sure you look at the rest of the instructions to get back on global from Indian.
Rayekk said:
Thank you very much! Tbh I can't understand how and why it works, but it worked!
Click to expand...
Click to collapse
Brother what is your phone model is it Chinese (Le2110)? or another model ?
bro i have the same issues , did u found any solution & can you help me plz
See if these steps work for you: (last post)
Display becomes unresponsive after OOS 12 update
I upgraded my OnePlus 9 LE2115 from OOS 11 to OOS 12, and every time the phone reboots after completing the update, the touch screen is completely unresponsive, so it stays stuck at the lock screen forever. I upgraded from OOS 11.2.10.10 to OOS...
forum.xda-developers.com
Hey, i have hardbricked my OnePlus 9 and now i have the connect and disconnect-problem in the EDL-Mode. My Model is a Lahaina and i hope it is the same like a Lemonade or a OnePlus 9. I was on the latest Android 12 for the OP 9 before it gets bricked. How i bricked my phone: First i have unlocked the Bootloader and after that i was trying to boot into TWRP. The bootscreen from TWRP comes and the screen gets black and then into boot dump mode. okay, then i installed this: https://forum.xda-developers.com/t/fastboot-rom-pc-required-op9-stock-oos-11-2-2-2aa.4275727/unread and the message <awaiting any device> shows up and i disconnected my phone. After that my phone just shows black and on the pc it just shows up the "QDLoader" (yes, the driver is installed) . How i could bring my phone back to life and fix the partitionproblem/connect & disconnect problem. The MSM just shows "Status of Connection: N/A" and "Waiting for device". I am using an Laptop with Windows 10 on it and an intel chipset.
I think i have killed the partitioning of the oneplus by downgrading from A 12 to A 11. Thanks for your help. By the way: I have downloaded the MSM with Indian OS and I have still the same problem.
I´ve got exactly the same situation and problem as DerBaLu841... Anything to do for now or is the OP9 finally hard bricked now..?
kischde said:
I´ve got exactly the same situation and problem as DerBaLu841... Anything to do for now or is the OP9 finally hard bricked now..?
Click to expand...
Click to collapse
Check this out:
MSM cannot recognize your phone aka. Sahara Connection error? Check this.
Hi! Today i successfully bricked my OP9 to the point where the global MSM tool couldn't recognize it anymore. I tried everything, from different MSM tools to this thread. Nothing. Then, Deus ex Machina, @flameteam recommended me to try...
forum.xda-developers.com
DerBaLu841 said:
Check this out:
MSM cannot recognize your phone aka. Sahara Connection error? Check this.
Hi! Today i successfully bricked my OP9 to the point where the global MSM tool couldn't recognize it anymore. I tried everything, from different MSM tools to this thread. Nothing. Then, Deus ex Machina, @flameteam recommended me to try...
forum.xda-developers.com
Click to expand...
Click to collapse
Hi! Have you telegram? Can I ask to you help with the method you posted?
Hi all,
After en epic failure of rooting process my OnePlus 8T is bricked: no bootloader, no fastboot, no recovery, nothing. The phone screen stays black and power button has no effect.
However, it can enter EDL mode and is recognized as "Qualcomm HS-USB Diagnostics 900E" in in Windows device manager. So I should be able to use MSMDownload Tool to (try to) unbrick my phone.
Just one problem: I don't really know if my phone is EU version or Global version.
In its back, its written "Model: KB2003" so it should be EU version right? But before bricking it, I've tried to flash Global version... which bricked it (I don't know if that's the reason or if I made an other mistake but...).
Do you know how can I guess the region of my OnePlus 8T?
And if I flash Global version with MSMDownload Tool while I have an EU phone (or inverse), is it dangerous?
Thanks a lot for your help!
KB2003 is the EU version. So best to use the EU MSM tool.
Hi @Qnorsten
Well, I tought my phone was Global so I used Global MSM... The process was a bit weird:
- Global MSM Download Tool restored my phone on Android 11
- once on Android home several updates have been found and one of these updates was KB2005_11_***** (and after this update my phone was recognized as "Model: KB2005" :]
- but after remaining updates (I think there were 5 or 6 consecutive updates) my phone is now on KB2003_11_C.33 and recognized as "Model: KB2003"
So this OP8T has been restored on Global OS, then updated on US OS and finally returned to EU OS :]
Weird but it's a good ending
CrissaegrimRusk said:
Hi @Qnorsten
Well, I tought my phone was Global so I used Global MSM... The process was a bit weird:
- Global MSM Download Tool restored my phone on Android 11
- once on Android home several updates have been found and one of these updates was KB2005_11_***** (and after this update my phone was recognized as "Model: KB2005" :]
- but after remaining updates (I think there were 5 or 6 consecutive updates) my phone is now on KB2003_11_C.33 and recognized as "Model: KB2003"
So this OP8T has been restored on Global OS, then updated on US OS and finally returned to EU OS :]
Weird but it's a good ending
Click to expand...
Click to collapse
A bit strange, but as long as it worked for you everything is fine I guess
Qnorsten said:
A bit strange, but as long as it worked for you everything is fine I guess
Click to expand...
Click to collapse
Yes definitely I really though my phone was dead.
When I set it to EDL mode, it stayed in this mode only 12 seconds then switched to "Qualcomm HS-USB Diagnostics 900E" state.
I tried to run MSMDownload Tool during these 12 seconds (I knew the process was longer than 12 seconds but as my phone seemed dead I guessed maybe the bootloader could be restored during these 12 seconds).
But starting the process allowed the phone to stay "stuck" in EDL mode.
Good experience. But now I won't try to root my phone once again.
I hard bricked my OnePlus 9 (LE2113) while I was trying to unlock the bootloader. I tried flashing with Global, EU and Indian variants of MSM Tools but none of them worked.
I'm holding Power and Vol Up to reboot, then I hold Up and Down Volume buttons, plug in with USB cable and start MSM Tool. Every time I try to flash with "Use LIte Firehose" unchecked I always get the "Sahara communication" error at exactly 18 seconds. With "Use LIte Firehose" checked however download completes normally but phone is still hard bricked. This happened on every MSM Tool I tried.
I tried this on two laptops (Win 10 with USB 2.0 ports & WIn 11 with USB 3.0 ports) but ended up with the same results. I'm also using official cable. I have Qualcomm drivers installed.
Can anyone help me? Phone is hard bricked. I can't access anything besides EDL.
Just noticed this thread after your comment in the MSM thread.
Please review my reply. In a nutshell, I bricked my OP9 to a point nothing would work, tried everything for days. Thankfully, EtherealRemnant told me about a specific MSMToolkit for Indian OP9Pros that would get my phone up and running and then be able to flash a proper OP9.
I just compressed it and uploaded it for you, in case you haven't grabbed it yet. Its hosted on mega, so the download should be acceptable wherever you reside on this dirty space ball we call home.
IndianOP9-ProMSM aka The Last Hope
And again, good luck, you got this!
applyscience said:
Just noticed this thread after your comment in the MSM thread.
Please review my reply. In a nutshell, I bricked my OP9 to a point nothing would work, tried everything for days. Thankfully, EtherealRemnant told me about a specific MSMToolkit for Indian OP9Pros that would get my phone up and running and then be able to flash a proper OP9.
I just compressed it and uploaded it for you, in case you haven't grabbed it yet. Its hosted on mega, so the download should be acceptable wherever you reside on this dirty space ball we call home.
IndianOP9-ProMSM aka The Last Hope
And again, good luck, you got this!
Click to expand...
Click to collapse
I managed to flash with Lite Firehose but phone is still dead. I had some issues with phone being recognized but it somehow connected. I have also noticed that device under Ports (COM & LPT) is being recognized even after unpluging the phone, weirdly.
deleted because double post sorry
your device is an eu model i would not answer it with the india msm tool or the modded msm tool, you should get it to work with the eu msm tool
I don't know to what extent the modded msm tool has been processed (my concern is that if certain data on the mobile phone is changed from eu to india, I am concerned that the eu msm tool will no longer work with the eu mobile phone afterwards because certain data now identify cell phone as india model)
I can't seem to get past the image verification on msmtool, ive read previous phones like op6t had patched msmdownloadtool for this. I have tried all qualcomm drivers (qcser.inf/Installer-10037.3/10039.2). I cant get into bootloader otherwise I would flash fastboot rom.
I'm using windows 10 (64x), oneplus original red cable for this, I've tried all msmtool versions for global, europe and india and they're all stuck on the same error message. The device was bought in europe and has the a2003 model number. Please help me out
vvnpyr said:
I can't seem to get past the image verification on msmtool, ive read previous phones like op6t had patched msmdownloadtool for this. I have tried all qualcomm drivers (qcser.inf/Installer-10037.3/10039.2). I cant get into bootloader otherwise I would flash fastboot rom.
I'm using windows 10 (64x), oneplus original red cable for this, I've tried all msmtool versions for global, europe and india and they're all stuck on the same error message. The device was bought in europe and has the a2003 model number. Please help me out
Click to expand...
Click to collapse
see this thread:
[OPNORD][OOS AC01AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
Trying to flash my friend's phone back to stock but having some issues, you might have seen twixyfig's post in the OnePlus 9 Pro threads, but it's a regular OP9 and not the Pro.
Anyways, I have been trying to flash to working condition but MSM won't help. It keeps saying "No valid trg ID" and "Param preload" for a while now. This happened because we tried to root the phone but failed. The bootloader is unlocked, and fastboot works too.
TIA.
Whenever you post asking for help, always make sure to add as many details as possible. Your phone model, variant, current firmware, the tool you are using, the tools you used before, the steps you took before you started facing issues, every detail you can possibly tell. Only then someone might be able to help.
shadabkiani said:
Whenever you post asking for help, always make sure to add as many details as possible. Your phone model, variant, current firmware, the tool you are using, the tools you used before, the steps you took before you started facing issues, every detail you can possibly tell. Only then someone might be able to help.
Click to expand...
Click to collapse
So its a oneplus 9 (Chinese model), before it got bricked it was on android 12, we tried MSM V5.1.89 and CMD, cmd said " No boot.img found "
twixyfig said:
So its a oneplus 9 (Chinese model), before it got bricked it was on android 12, we tried MSM V5.1.89 and CMD, cmd said " No boot.img found "
Click to expand...
Click to collapse
Download the MSM Tool (Global) from this link. Global works on Chinese variant (LE2110) too. Have proper drivers OnePlus drivers installed. Turn off your phone and set it aside, do not connect to PC yet. Run the MSM Tool exe file. Once its loaded, click Start and it should wait for device. Now on your phone, hold vol+ and vol- buttons (no power button), and connect the cable to phone. This will make the phone enter EDL mode. The PC would recognize the device (USB plugged in sound) but phone screen would still be black. On MSM, the flashing would start and would be done in about 4-5 mins. Good luck.
shadabkiani said:
Download the MSM Tool (Global) from this link. Global works on Chinese variant (LE2110) too. Have proper drivers OnePlus drivers installed. Turn off your phone and set it aside, do not connect to PC yet. Run the MSM Tool exe file. Once its loaded, click Start and it should wait for device. Now on your phone, hold vol+ and vol- buttons (no power button), and connect the cable to phone. This will make the phone enter EDL mode. The PC would recognize the device (USB plugged in sound) but phone screen would still be black. On MSM, the flashing would start and would be done in about 4-5 mins. Good luck.
Click to expand...
Click to collapse
Thanks! Im gonna try this today and give you an update when something happens
twixyfig said:
Thanks! Im gonna try this today and give you an update when something happens
Click to expand...
Click to collapse
I think you were trying Indian MSM Tool. That might be the problem.
When your open MSM Tool, choose Others as login.
Write me in dm and I will help you, I think I can solve your problem
you can download OP9PRO India MSM tool(OnePlus_9_Pro_India_OxygenOS_11.2.4.4) and
1.unzip OP9Pro India ROM and download to your phone(select the firhose chebox)
2.if you success to download it,your phone will restart to the OOS.
3.Login your Google account and unlock OEM,then reboot your phone
4. install "Oxygen Updater", VERSION 5.7.3，you can find it on github.
5.download OOS for OP9 , archive name is "1797d47ddef0fca1411fb006b9c7a1a7ba33d818.zip"
6.enter the oxygen updater,and flash "1797d47ddef0fca1411fb006b9c7a1a7ba33d818.zip" to your phone
7.reboot and fixed!
PS: my english is so suck,try to read it!
good luck!