Related
Any good powerbank out there. At least a 10000 mah above.
To be able to use fast charging feature in Note 4.
Actually that sounds like it would be really cool if it exists, I'd also be interested in knowing if there's a powerbank that supports quick charge. I've held off on picking up a powerbank for a while now, but if something like this is even possible it would probably get me interested, it'd be pretty awesome to be able to just plug in to a backup battery and have it charge up the phone with quickcharge speed ;P I wouldn't be surprised to find out it's not possible though... Anyone know?
Think the dual voltage 5 and 9 volt needed for quickcharge wil be a problem to design a powerbank with a feature like that. I don't say it's impossible but probably won't be cheap or small formfacfor
Yea. Is cool if fast charge powerbank then bring out to fast charge note 4. Lol.
There is this compact power bank (and it supports quick charging itself within 3 hours - via 2.1A input - at least on paper)
APE MP5200Q on Alibaba (not aliexpress)
Weight: 132g
Input: 5V/2.2A
Outport: 5V/3.5A,9V/1.5A,12V/1.5A
3 output ports: 2 USB ports and 1 built-in micro USB cable
Over-charge/discharge, over-current,short protection
Quick Charge output port: output 9V/1.5A or 12V/1.5A on Quick Charge state
Battery Cell type: Samsung Li-ion 18650
Quick charge 2.0: Class A
and it looks good too!
the only missing thing to make it a perfect power bank, would be 15W wireless charging capability...
Please everyone do say what Power bank you have
& how much time does it take to fully charge a Drained battery
So we know which charges how many times, Once or twice or more ....
Thank you all
I have aukey quick charge the silver 10400mah model its charge lg g4 same as qc2.0 wall charger I have mah meter
I also have an aukey but the PB-T2 model 12000mAh. Have quick charge USB outlet and also a normal 1A USB outlet. Has a 2A microusb input for charging an a so-so LED light built in. A bit heavy and slightly longer than the Note 4 in size. Cons: I would have preferred a 2.1A instead of the 1A USB outlet for fast charging other non quick charge devices.
yosef019 said:
I have aukey quick charge the silver 10400mah model its charge lg g4 same as qc2.0 wall charger I have mah meter
Click to expand...
Click to collapse
As above Aukey Quick Charge 2.0 external battery packs are pretty good. They do them in different sizes and go above 10000mah
BlitzWolf looks good.
banggood.com are doing pre order, to be sent out 20th November.
From a store rep..
We use the newer chip FP6600 that not only supports QC but also standard fast charging, the Aukey does charge at QC speeds with their THY100 but will not fast charge other devices such as your iPhone at fast speeds. BlitzWolf's newer IC provides compatibility beyond just QC devices. The battery of the BlitzWolf is is LG and also of a higher standard than Aukeys domestic Chinese brand batteries. In terms of safety and compatibility this is one step ahead of Aukeys 6 month old version.
Click to expand...
Click to collapse
Use coupon "12blitzw" for 12% off.. (Don't know when it ends)
I am using Aukey Power Bank with 15000maH.
Supports Quick Charge and PowerBank itself charges as Quick Charging.
jianrong said:
Any good powerbank out there. At least a 10000 mah above.
To be able to use fast charging feature in Note 4.
Click to expand...
Click to collapse
Hmm... we have Note 4's a removable battery is more compact and supports quick charge. Just have to get a battery charger that supports it. There would also be less power loss because it would be more efficient than transferring energy from one battery to another. Just my opinion.
Will any 65W charger work for Super VOOC charging or does it have to be the specific Oppo charger? Anyone have any experience? I rather leave the charger it comes with new in the box for selling purposes and would pick one up on Amazon if it works with a regular 65w charger
I try to use with MacBook adapter 85w, chardiging working normaly, fast like qc2.0 But original super Fast 2-3 times less, i recomend use original chardger, its azing expirirence to chardge phone 5 min to 25%
yarik88 said:
I try to use with MacBook adapter 85w, chardiging working normaly, fast like qc2.0 But original super Fast 2-3 times less, i recomend use original chardger, its azing expirirence to chardge phone 5 min to 25%
Click to expand...
Click to collapse
Yeah I found it is proprietary for Super VOOC. Although 65W, it needs to deliver it at 6 amps & 10 volts to get the super fast charging. No on the market charger has that option (even smart 65w chargers) to deliver the power at that rate... if I keep the phone long enough, I'll just get one from aliexpress.
You can buy oneplus chardger, i try with old (op5) oppo show vooc chardge. And with new (op 7t pro) chardger i have super vooc. Its the same.
yarik88 said:
You can buy oneplus chardger, i try with old (op5) oppo show vooc chardge. And with new (op 7t pro) chardger i have super vooc. Its the same.
Click to expand...
Click to collapse
Oneplus Warp charger 30T charges at VOOC, not super VOOC, for me
hello
have a nice day
Would the OnePlus Warp Charge 65 Power Adapter (https://www.oneplus.com/uk/product/oneplus-warp-charge-65-power-adapter) be apple to charge an Oppo Find X2 Pro with the same speed as the original charger?
15-18w charger from samsung charges fast too without melting the battery like 65w.
Hello
So a couple of weeks back I upgraded to the Poco F2 Pro 6/128GB from my Mi 9T.
I have been using a magnetic charging cable with my Mi 9T, with a little magnetic part permanently in the usb port for convenience with a standard QC3.0 charger. Worked great and charged fast at 18W.
I wanted a similar solution for my Poco F2 Pro.
So I have done some testing and the results might surprise you.
Poco supports 30W Mi Turbo Charge which seems to be a custom Xiaomi charging protocol and does not seem to play nice with standard USB PD3.0 Protocol.
I have done charging tests from ~5-20% battery for maximum charging speeds and tested the actual charge rates with a USB Voltmeter
Voltmeter:
https://www.ebay.co.uk/itm/USB-Mete...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2648
Test 1: Original Charger and Cable
Result: 30W Mi Rapid Charging (~9.6V, 3.1A) As Expected
Even tho the original charger is rated at Max 33W, Poco only charges at 30W Max.
Test 2: 60W USB PD3.0 Charger + 5A Type C to Type C Cable
Charger: https://www.amazon.co.uk/gp/product/B0824S38VC/ref=ppx_yo_dt_b_asin_image_o07_s00?ie=UTF8&psc=1
Cable: https://www.amazon.co.uk/gp/product/B07QPNRGYH/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Result: 18W Standard Fast Charging (~9.2V, 1.9A)
I did multiple tests to check if the charger is legit (which it is, many of my friends use it with different devices and it works great) with my brothers Pixel 4XL, and my friend Xiaomi Mi 9.
Pixel Charged at 18W, Mi 9 at 27W.
The phone did not charge at 27W (~9V 3A), even to it does support PD 3.0 charging.
Test 3: Original Charger with a 3A Ugreen Magnetic Cable
Cable: https://www.ebay.co.uk/itm/Ugreen-M...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2648
Result: ~25W Mi Turbo Charging (~9.6V, 2.6A)
This is very interesting since it does trigger the Mi Turbo Charge, it is not the full speed charge like with the original setup.
Original setup also has a charging animation, with the % increasing at a steady speed.
With the Ugreen Cable, there was no animation.
Test 4: Original Charger + 40W Huawei Supercharge Cable
Cable: https://www.amazon.co.uk/gp/product/B08CR7W2T1/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
Result: ~25W Mi Turbo Charging (~9.6V, 2.6A)
The original Xiaomi Cable is a 5A Cable, so I thought id try a Huawei Supercharge Cable, but it ended up charging the same as a 3A Ugreen Cable
Test 5: 60W USB PD3.0 Charger + 5A Magnetic Type C to Type C Cable
Charger: https://www.amazon.co.uk/gp/product/B0824S38VC/ref=ppx_yo_dt_b_asin_image_o07_s00?ie=UTF8&psc=1
Cable: https://www.amazon.co.uk/gp/product/B08HLN27DP/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
Result: 18W Standard Fast Charging (~9.2V, 1.9A)
Again, standard 18W fast charging, not 27W as you would expect.
Conclusion:
From my testing, the only way to charge the Poco at Maximum speed of 30W is with the charger and cable which I find very strange. Does the original Xiaomi cable have a custom Xiaomi chip which handshakes with the charger to get the full 30W Mi Turbo charge?
With a PD3.0 Charger, I was only able to achieve 18W of fast charging, again very strange, since Poco should support 27W (~9V 3A) charging with any PD3.0 Charger.
I have settled for a setup with the Ugreen Magnetic Cable and the Original Charger for convenience, ease of use and preventing the USB port from being worn out. I am loosing about 5W of speed, which does slightly increase the charging time. (I charge my phone to ~85% max)
(If there is something wrong with my methodology let me know and I will re-test if needed)
I approved with an Aukey 29w Fast Charging charger (model pa-y7) and the same charge at 18W, even with the type-c cable on both sides (Baseus brand cable up to 60W)
It seems like Xiaomi cable and charger have an extra pin. That might trigger and power the turbocharge
osvaldo.17 said:
This little pin makes the difference.!
Click to expand...
Click to collapse
I've tried this one:
For Xiaomi GaN 65W Travel Charger USB Type-C Smart Output PD Quick Charge | eBay
Find many great new & used options and get the best deals for For Xiaomi GaN 65W Travel Charger USB Type-C Smart Output PD Quick Charge at the best online prices at eBay! Free shipping for many products!
www.ebay.com
I don't know at which rate it charges but it triggers Charge turbo animation with the % increasing at a steady speed with almost any proper USB-C to USB-C cable.
I've also found that if you launch the CIT on the phone by tapping on kernel version 3 times on settings->About this phone->All specs
and go to the charging test (number 24) you can check which protocol is being used
If you use any QC3.0 charger it says USB_HVDCP, which triggers fast charging but not the charge turbo animation.
If you use a regular PD charger it says USB_PD which also triggers fast chargingbut also not the charge turbo animation.
If you use the original setup it also says USB_PD which means that extra pin it has on the USB-A connector is wired in a weird way it actually negotiates usb PD protocol, which I can also confirm because I connected it to a Thinkpad T480 and with the Lenovo Vantage software gets 27W charging, which is not possible with any USB-A to USB-C cable and QC3.0 charger.
Which may mean that maybe Xiaomi didn't want to pay for the QC4.0+ chipsets or something and did some weird stuff to get PD through QC3.0 by that pin and through the F2s software reducing the cost of the charger in the box and whatever else. As for this GaN 65W charger I have no idea on how they pull that off but is a proper PD charger
Since the update to Android 11, a set of cables that previously triggered the Turbo Charge, now suddenly work only as Fast Charge.
They were a bit slower than original before, but now they are a lot slower.
I only have the Accubattery measurements:
cca 4000 mA average on Android 10,
cca 3000 mA average on Android 11.
While the original charger + cable shows about 4500-5000 mA average.
They really managed to screw this device.
On ArrowOS my device charging at 1.8A and 7.5V with original charger and wire... so it depends on software. But anyway I don't want to downgrade from perfect OS to buggy MIUI only because of that.
I also have seen a weird change in charge speeds..
Used to be totally fine but it seems that for a while now the speeds are very slow and quickcharge isnt working anymore..
shicomm said:
I also have seen a weird change in charge speeds..
Used to be totally fine but it seems that for a while now the speeds are very slow and quickcharge isnt working anymore..
Click to expand...
Click to collapse
hey have the same problema. here. teh only way to get fast chager is with the original charger al cable. PD charger give me fast charge. but all my other chargers that gives me fast charger in other devices gives me NOTHING now.
original charger 4300 ma,
PD: 1200 ma
fast chargers QC 3 and others: 230 ma !!
****ty old chargers : 230 ma.
so what the hell? I was thinking that I screwed the port of the phone with magnetics cables before read this.
Just my 2 cents here. Don't try to charge this phone with super fast chargers. Mine developed the well known fault that you needed to press the corner of the phone to get it to start charging. I even opened it and put a bit of a tape behind the ribbon cable connector (as some guy suggested on YT). It started charging again and then after a couple of weeks and a few more quick charges it stopped charging at all. I guess heat affects the connector or some element on the board. I've just ordered a new usb board and ribbon cable from Ali and if the phone comes back to life again I will never ever use the original rapid charger that came with the phone.
So, when it is about charging, this Galaxy S21+ (Exynos) can be really choosy. With a lot of chargers, it difficulty reach 1.3A. Only few of the selected chargers (my Lenovo 65Watt laptop charger, IKEA 27Watt charger) it could reach 2A charging with wired. For wireless charging, it's even worse. Currently I owned 3 wireless chargers.
1. Energizer 15Watt charger. Never even shows Fast Wireless Charging.
2. Samsung EB-U1200 Wireless Charging Power Bank. This one shows Fast Wireless charging. It could charge up to 2A for a while and then once the battery temp hits about 39C (and it hits there within 5 mins), it throttles.
3. Huawei SuperCharge 27Watt Wireless Charger (with Huawei 22.5Watt SuperCharge Charger and 5A cable), performs same as Samsung Power Bank. Reaches up to 2A, then battery heats up and throttles.
I've tried different ways, including removing the phone case while charging but result is still the same. Does any of you have similar experience? or is it just my phone? Please advise me how to make wireless charging more efficient.
I've not tried wireless charging however for wired you need a charger that supports USB C PD PPS (this is a fairly new standard) and without this you won't get anything more than about 2A.
This Ravpower charger for £16 (£13 with current voucher code) works a treat hitting 4.6A when the battery is empty reducing as the battery becomes full. You have to use USB C to USB C to achieve this.
RAVPower USB C Plug Charger, 30W 2-Port PD Fast Charger: Amazon.co.uk: Electronics
Free delivery and returns on eligible orders. Buy RAVPower USB C Plug Charger, 30W 2-Port PD Fast Charger for iPhone 12 Mini Pro Max, with 20W Power Delivery 3.0, Durable & Compact Wall Charger for MagSafe Charger, iPad Pro, Galaxy, Nintendo Switch at Amazon UK.
www.amazon.co.uk
My guess is there will be a similar standard for wireless charging that you need to adhere to.
Hi Guys,
Does the GT NEO2 support the QC3.0 charger ?
I had try all of my qc3.0 chargers . It didn't work for NEO2 . all of the chargers work fine on my RM GT 5G and all of Xiaomi phones.
so are they cut the QC 3.0 option on NEO2?
Thanks,
Yea seems like they want you to destroy Ur battery since the phone discharges faster then it charges on any other adapter I tried. Really sucks..
Juergen1337 said:
Yea seems like they want you to destroy Ur battery since the phone discharges faster then it charges on any other adapter I tried. Really sucks..
Click to expand...
Click to collapse
you're doing it wrong.
please learn about chargers and cables and use ones that make sense for this device.
to answer OP. you can charge at 1A, 2A, 3A even 6A+ with superdart. please research about what you need. qc3 works fine as tested by me and many others.
I got same problem...solved using power delivery chargers (PD 2.0 or 3.0 should be enough, but I use a common original Samsung 20w charger and Type C to type C (Chinese) cable, both supporting PD) with Ampere I got something like 5v and 1700-1900 mah so, something about 10w or less of real charge power...but it's the fair spot for me between speed charge, temperatures and safety (even if it's safe to charge it with it's 65w original charger) just to make peace with my mind