Related
Can miui official roms be flashed with twrp? Or do they only flash on MI stock recovery?
If you have it as a zip for recovery than you can also flash it with twrp
rob rich said:
If you have it as a zip for recovery than you can also flash it with twrp
Click to expand...
Click to collapse
Are you sure? Because I saw that someone said they are supposed to be used with MI stock recovery on miui forum. But it was just one guy...and I never saw anywhere that those roms provided by miui website could be flashed with twrp, that's why I asked. Have you tried that?
Yes, sure. I switch between miui 6 stable rom, miui 7 global beta rom and euphoria or cm roms almost every day
rob rich said:
Yes, sure. I switch between miui 6 stable rom, miui 7 global beta rom and euphoria or cm roms almost every day
Click to expand...
Click to collapse
@rob rich : can you upload for me recovery image (mi recovery) from miui 7 v5.8.22 first version of global beta rom??. just recovery image. thanks before
because when i restore stock stable recovery image from miui 6, i got bootloop & not reboot to recovery.
EDIT >> i use mi toolkit too, but same bahavior. no reboot to recovery.
hello everyone,
how can I go back to MIUI ROM ? I want one message which I took backup using MIUI PC Suite. I was on CM12.1, copied 6.6.6.0 & 6.7.2.0 in my phone (for safety). I did clean for system, cache, dalvik-cache, data. Now when I'm trying to install 6.6.6 or 6.7.2 it's giving me error.
mount: failed to mount /dev/block/bootdevice/by-name/userdata at /data: Device or resource busy
mount: failed to mount /dev/block/bootdevice/by-name/system at /system: Device or resource busy
E: Error executing updater binary in zip '/sdcard/Mi 4i ROMs/ Mi4i_Global_V6.6.6.0.LXIMICF.zip'
how can I achieve this ? am I doing something wrong ???
Please help me.
First wipe cache,data,dalvik,system and then reboot to recovery again then flash the miui rom wait for 10 min.
Need help with custom rom installation
rob rich said:
Yes, sure. I switch between miui 6 stable rom, miui 7 global beta rom and euphoria or cm roms almost every day
Click to expand...
Click to collapse
Hi Bro, When i tried to install custom rom (InfinitiveOS-v1.2-ferrari-5.1.1--20150905-OFFICIAL) Im always getting error. Im using latest version of MIUI 7 beta. Steps i followed are: 1. download rom n gapps 2. Rooted and installed cutom recovery(TWRP) 3. wiped cache and reset everything. 4. i tried to install custom rom and im getting error saying something about MD5 and partition. Help me please
Yeah
migueldbr said:
Can miui official roms be flashed with twrp? Or do they only flash on MI stock recovery?
Click to expand...
Click to collapse
Yes , its possible
Use firmware-lp-6.6.10.0 patch
Hasain said:
Hi Bro, When i tried to install custom rom (InfinitiveOS-v1.2-ferrari-5.1.1--20150905-OFFICIAL) Im always getting error. Im using latest version of MIUI 7 beta. Steps i followed are: 1. download rom n gapps 2. Rooted and installed cutom recovery(TWRP) 3. wiped cache and reset everything. 4. i tried to install custom rom and im getting error saying something about MD5 and partition. me please
Click to expand...
Click to collapse
Whenever u switch from miui to any new custom rom , flash a patch 6.6.10.0 file .. u can avoid this error .. And then follow the usual process after flashing that patch file....
"https://basketbuild.com/uploads/devs/thewisenerd/ferrari/firmware-lp-6.6.10.0.zip"
I m running RR 5.8.5 and twrp recovery.
How can I go back to stock miui rom?
Tried flashing stock ROM from twrp recovery, but failed. Can someone guide me for the same?
Thanks.
yes. flash use lazyflasher on twrp
Hello guys !
I've a poco with nvt panel and its has delay touch issue for long times. I flash many custom rom and custom kernel but its still there.
Now delay issue has gone away after i do those steps. I had tested on my poco and my friend, we have nvt panel both.
You should unlock bootloader and twrp installed, i used 3.3.0.0. Download xiaomi eu stable 10.3.8.0 (android 9) and xiaomi eu weekly 8.10.25 (android 8.1) to your storage, and download kernel Arter97 r11 from xda.
Do this at your own risk!
1. Flash and settings up xiaomi eu 10.3.8.0 rom completely (Android 9 stable). Then reboot to recovery.
2. Backup boot, system, vendor, data partitions.
3. Wipe boot, system, vendor, data then reboot to recovery.
4. Flash xiaomi eu 8.10.25 with DFE and magisk. After that you can reboot to system or simply reboot to recovery without setting up new rom.
5. In recovery, choose restore boot, system, vendor, data from step 2. Remember that just restore and dont flash 10.3.8.0 again.
6. Flash Magisk, DFE, custom kernel Arter97 r11.
7. Reboot to system and enjoy.
I dont know how its work so dont ask me why. Dont use Android 10, bootloop. Pubg mobo is now smooth and dont make you angry anymore.
module?
spindlygaming said:
module?
Click to expand...
Click to collapse
I dont use any module except systemless host. Module is not affects my solution.
Summary :
- Flash your favor rom, kernel, module.... I call A. Dont use Android 10, doesn't work.
- Boot to system and optimize yourself.
- Backup A including Data in TWRP 3.3.0.0.
- Flash xiaomi eu 8.10.25 with DFE, after that reboot to recovery (dont need to reboot to system).
- Dont wipe anything, just restore A and reboot to system. Enjoy!
thithi1983 said:
I dont use any module except systemless host. Module is not affects my solution.
Click to expand...
Click to collapse
even thermal mod
---------- Post added at 09:08 AM ---------- Previous post was at 08:52 AM ----------
thithi1983 said:
Summary :
- Flash your favor rom, kernel, module.... I call A. Dont use Android 10, doesn't work.
- Boot to system and optimize yourself.
- Backup A including Data in TWRP 3.3.0.0.
- Flash xiaomi eu 8.10.25 with DFE, after that reboot to recovery (dont need to reboot to system).
- Dont wipe anything, just restore A and reboot to system. Enjoy!
Click to expand...
Click to collapse
why not flash firmware 8.10.25
than flash rom
You don't have to do all this to fix touch issues on nvt... Just flash your favorite kernel with the 9.1.24 touch drivers and that's it. And that's regardless of the Android version (not sure about Oreo tho but I guess at this point everyone is either on Pie or Q anyway). I use arter97 r9 in every ROM I flash because it's very stable and uses the 9.1.24 touch drivers which are the best for nvt panels. This firmware has almost no touch delay and scrolling is perfect.
mario123m said:
You don't have to do all this to fix touch issues on nvt... Just flash your favorite kernel with the 9.1.24 touch drivers and that's it. And that's regardless of the Android version (not sure about Oreo tho but I guess at this point everyone is either on Pie or Q anyway). I use arter97 r9 in every ROM I flash because it's very stable and uses the 9.1.24 touch drivers which are the best for nvt panels. This firmware has almost no touch delay and scrolling is perfect.
Click to expand...
Click to collapse
r9 is very old
spindlygaming said:
r9 is very old
Click to expand...
Click to collapse
I don't see how this is a problem if everything works perfectly fine.
spindlygaming said:
module?
Click to expand...
Click to collapse
mario123m said:
You don't have to do all this to fix touch issues on nvt... Just flash your favorite kernel with the 9.1.24 touch drivers and that's it. And that's regardless of the Android version (not sure about Oreo tho but I guess at this point everyone is either on Pie or Q anyway). I use arter97 r9 in every ROM I flash because it's very stable and uses the 9.1.24 touch drivers which are the best for nvt panels. This firmware has almost no touch delay and scrolling is perfect.
Click to expand...
Click to collapse
Have you play PUBGm on poco f1? I try many kernel including arter97 r9 and twisted prime 9.1.24 touch driver. Delay touch still happen when i play with 4 fingers claw. Only solution i wrote solved the problem.
spindlygaming said:
even thermal mod
---------- Post added at 09:08 AM ---------- Previous post was at 08:52 AM ----------
why not flash firmware 8.10.25
than flash rom
Click to expand...
Click to collapse
I want to flash only vendor but i dont know how to convert vendor.new.dat.br to vendor.img
Flash rom then backup vendor IMG in twrp
JV Spartacus said:
Flash rom then backup vendor IMG in twrp
Click to expand...
Click to collapse
Thanks! You open my mind!
thithi1983 said:
Thanks! You open my mind!
Click to expand...
Click to collapse
Will you share it here so that noobs like me can get it easily.
zip file error problem
thithi1983 said:
Hello guys !
I've a poco with nvt panel and its has delay touch issue for long times. I flash many custom rom and custom kernel but its still there.
Now delay issue has gone away after i do those steps. I had tested on my poco and my friend, we have nvt panel both.
You should unlock bootloader and twrp installed, i used 3.3.0.0. Download xiaomi eu stable 10.3.8.0 (android 9) and xiaomi eu weekly 8.10.25 (android 8.1) to your storage, and download kernel Arter97 r11 from xda.
Do this at your own risk!
1. Flash and settings up xiaomi eu 10.3.8.0 rom completely (Android 9 stable). Then reboot to recovery.
2. Backup boot, system, vendor, data partitions.
3. Wipe boot, system, vendor, data then reboot to recovery.
4. Flash xiaomi eu 8.10.25 with DFE and magisk. After that you can reboot to system or simply reboot to recovery without setting up new rom.
5. In recovery, choose restore boot, system, vendor, data from step 2. Remember that just restore and dont flash 10.3.8.0 again.
6. Flash Magisk, DFE, custom kernel Arter97 r11.
7. Reboot to system and enjoy.
I dont know how its work so dont ask me why. Dont use Android 10, bootloop. Pubg mobo is now smooth and dont make you angry anymore.
Click to expand...
Click to collapse
pleaseeeee help meeeeeeee
please give me a link for arter 97 kernel for poco f1
when i flash the kernel it error zip file pleaseeeeee
mahdih78 said:
pleaseeeee help meeeeeeee
please give me a link for arter 97 kernel for poco f1
when i flash the kernel it error zip file pleaseeeeee
Click to expand...
Click to collapse
Dont save zip file in sd card, error in some case.
Store it on internal storage and flash it.
how???
thithi1983 said:
Dont save zip file in sd card, error in some case.
Store it on internal storage and flash it.
Click to expand...
Click to collapse
i dont know how to flash it without zip file
i cant find the link of that kernel you said
please give me the link and please help me how to install that kernel
i installed the 8.25.10 eu but i couldnt install the kernel you said
help pleaseeeeee
mahdih78 said:
i dont know how to flash it without zip file
i cant find the link of that kernel you said
please give me the link and please help me how to install that kernel
i installed the 8.25.10 eu but i couldnt install the kernel you said
help pleaseeeeee
Click to expand...
Click to collapse
Ok there you go.
https://forum.xda-developers.com/poco-f1/development/arter97-kernel-poco-f1-t3919127
thithi1983 said:
Ok there you go.
https://forum.xda-developers.com/poco-f1/development/arter97-kernel-poco-f1-t3919127
Click to expand...
Click to collapse
Arter97 has made it paid I can't download it from this thread
how to install it and made it paid
ThePrathamesh said:
Arter97 has made it paid I can't download it from this thread
Click to expand...
Click to collapse
yeah he is right
i dont know how to install it without zip file
help please man
is your pubg mobile working good know or still have touch delay with this kernel ???
arter kernel download link.
t.me/s/PocoRomNews/2565?q=%23arter
Could anybody share how can I move from MiUI EU ROM for K30 11.0.15.0 to Poco X2 official build 11.0.7.0?
I installed EU ROM as I found flashing ROM with TWRP was easier than using Mi Flash tool, in case we want to switch between ROM's. But, after I installed 11.0.15.0 I figured lot of the custom ROM's do not boot after flashing them and phone boots into fastboot mode (except couple of ROM's). So, I have been looking at how switch back EU MiUI ROM from 11.0.15.0 to Poco X2 11.0.7.0. The issue am facing while flashing using Mi Flash tool is that it gives error of ARB (Anti rollback error: 2, also I checked the same by issuing fastboot getvar anti, it says 2), and I am not sure how to get past this.
Could someone please help me with this?
I think your device is triggered with anti-rollback. So you cannot install any rom with build less than 11.0.15.0 that is poco x2 11.0.7.0 cant be flashed. So, you have to wait until new poco build greater than 11.0.15.0 and then flash it. Until then, flash your existing rom or some custom rom. Do it carefully and dont ever flash older roms from now, if something goes wrong, your device will hardbrick and you will have to go to service center where they have authorized EDL access to your device to flash things. Best of Luck.
You can use full recovery rom zip 11.0.7 and flash it via twrp. In 11.0.7 zip make sure you change the devicename in script from phoenixin to phoenix as twrp is pheonix.
After flashing you will be on stock 11.0.7 and stock recovery.
If you want to try custom roms , you can just flash the stock vedor zip of 11.0.07 and then flash any aosp custom rom.(you can find this zip in telegram channel/github)
eagle06 said:
You can use full recovery rom zip 11.0.7 and flash it via twrp. In 11.0.7 zip make sure you change the devicename in script from phoenixin to phoenix as twrp is pheonix.
After flashing you will be on stock 11.0.7 and stock recovery.
If you want to try custom roms , you can just flash the stock vedor zip of 11.0.07 and then flash any aosp custom rom.(you can find this zip in telegram channel/github)
Click to expand...
Click to collapse
Bro, but what about anti-rollback hardbrick?.. new miui wont allow downgrade right? he has very newer build than 11.0.7.
eagle06 said:
You can use full recovery rom zip 11.0.7 and flash it via twrp. In 11.0.7 zip make sure you change the devicename in script from phoenixin to phoenix as twrp is pheonix.
After flashing you will be on stock 11.0.7 and stock recovery.
If you want to try custom roms , you can just flash the stock vedor zip of 11.0.07 and then flash any aosp custom rom.(you can find this zip in telegram channel/github)
Click to expand...
Click to collapse
vivek12341 said:
Bro, but what about anti-rollback hardbrick?.. new miui wont allow downgrade right? he has very newer build than 11.0.7.
Click to expand...
Click to collapse
@eagle06 am worried about 11.0.15.0 > 11.0.7.0 which will trigger ARB as @vivek12341 has pointed out and it will hard brick the device, from what I have read around, hence this post if anybody knows a way out. There seemed to be workarounds initially when Xiaomi introduced ARB, I have not seen anybody mentioning such things in recent times especially for MiUI 11.
The reason why I moved to 11.0.15.0 is was, as it has no bloatware etc, and I did NOT know about ARB, now that I have 11.0.15.0 most of the custom ROMs are based on Poco X2 11.0.7.0 and I am facing issues flashing ROMs based on 11.0.7.0, as the format data from TWRP does not wipe properly + I see 98% of the time device goes to fastboot mode even if I flash Poco stock recovery and clear the data, seems like 11.0.15.0 is also an issue
May be I will have to wait till Poco releases updates > 11.0.15.0 or for MiUI 12. Actually I still dont know, not many know much on this subject.
crDroid works without any issues (which is what my current daily driver, its a very stable ROM), flashing on 11.0.15.0 after clearing data, also any ROM whose dev releases fastboot ROM's those also I can flash and boot without issues, rest all ROM's dont and end up back in fastboot mode
coolcorner said:
Could anybody share how can I move from MiUI EU ROM for K30 11.0.15.0 to Poco X2 official build 11.0.7.0?
I installed EU ROM as I found flashing ROM with TWRP was easier than using Mi Flash tool, in case we want to switch between ROM's. But, after I installed 11.0.15.0 I figured lot of the custom ROM's do not boot after flashing them and phone boots into fastboot mode (except couple of ROM's). So, I have been looking at how switch back EU MiUI ROM from 11.0.15.0 to Poco X2 11.0.7.0. The issue am facing while flashing using Mi Flash tool is that it gives error of ARB (Anti rollback error: 2, also I checked the same by issuing fastboot getvar anti, it says 2), and I am not sure how to get past this.
Could someone please help me with this?
Click to expand...
Click to collapse
You should flash back to China rom (V11.0.15.0.QGHCNXM) using miflash and install TWRP-3.4.1B-0322 using fastboot. After that you can flash all custom roms as normal. I have tried almost all the custom roms and they all work without any problem.
Lol.. Bro i am on miui 12 beta and went back to 11.0.0.7 via twrp flash...
Just download this http://bigota.d.miui.com/V11.0.7.0....NGlobal_V11.0.7.0.QGHINXM_9c232b802a_10.0.zip
Open that in pc, modify the script and rename device name to phoenix from phoenixin.
On twrp format data.. Then reboot to twrp again, tranfer that zip file and just flash. You will be back on stock global 11.0.0.7
Also crdroid as you mentioned has custom vendor which is different from china eu or global one.
If you want to use fastboot zip then you need to use https://www.xiaomitool.com/V2/ to overcome antirollback error.
eagle06 said:
Lol.. Bro i am on miui 12 beta and went back to 11.0.0.7 via twrp flash...
Just download this http://bigota.d.miui.com/V11.0.7.0....NGlobal_V11.0.7.0.QGHINXM_9c232b802a_10.0.zip
Open that in pc, modify the script and rename device name to phoenix from phonenixin.
On twrp format data.. Then reboot to twrp again, tranfer that zip file and just flash. You will be back on stock global 11.0.0.7
Also crdroid as you mentioned has custom vendor which is different from china eu or global one. e
If you want to use fastboot zip then you need to use https://www.xiaomitool.com/V2/ to overcome antirollback error.
Click to expand...
Click to collapse
1. Which script are you talking about? I could not find any script. check attached snapshot.
2. And to do this step from TWRP to flash 11.0.7.0, do I need to be on MIUI EU ROM or I can flash from any custom ROM too?
3. You were on MIUI 12 beta (official global) and changed devicename from phoenixin to phoenix and flashed using TWRP after formatting data, without hitting ARB issue? Wow!
4. You mentioned https://forum.xda-developers.com/showpost.php?p=82502389&postcount=3 Telegram/Github where we can get official vendor zip which we can flash from TWRP, any links to that?
5. Is there a Redmi K30 global ROM which I can use instead of Poco X2, they should be same right?
eagle06 said:
You can use full recovery rom zip 11.0.7 and flash it via twrp. In 11.0.7 zip make sure you change the devicename in script from phoenixin to phoenix as twrp is pheonix.
After flashing you will be on stock 11.0.7 and stock recovery.
If you want to try custom roms , you can just flash the stock vedor zip of 11.0.07 and then flash any aosp custom rom.(you can find this zip in telegram channel/github)
Click to expand...
Click to collapse
Please share telegram or github link for vendor.zip which I can flash using TWRP. As crDroid has custom vendor may be that is why it works for me on EU ROM and I see other custom ROMs do not have vendor installed while flashing using TWRP.
jngiag said:
You should flash back to China rom (V11.0.15.0.QGHCNXM) using miflash and install TWRP-3.4.1B-0322 using fastboot. After that you can flash all custom roms as normal. I have tried almost all the custom roms and they all work without any problem.
Click to expand...
Click to collapse
As a final resort will go to China ROM V11.0.15.0.QGHCNXM (this will be chinese right?) or this itself is global K30 ROM? Any links to global official MIUI K30 ROM, all I get is K30 chinese ROM
Sorry, I am asking too many questions, I do not want to brick phone in these times and go stand in queue at Mi service center during these times, when the servicing engineer will touch my phone all over
coolcorner said:
1. Which script are you talking about? I could not find any script. check attached snapshot.
Its in META-INF/com/google/android/ file name updater-script. Change getprop("ro.product.device") == "phoenixin" || this to getprop("ro.product.device") == "phoenix" || . Why we are doing this? because we are using k30 twrp.. there is no special twrp for poco x2. phoenix = k30, phoenixin=poco x2
2. And to do this step from TWRP to flash 11.0.7.0, do I need to be on MIUI EU ROM or I can flash from any custom ROM too? Any rom
3. You were on MIUI 12 beta (official global) and changed devicename from phoenixin to phoenix and flashed using TWRP after formatting data, without hitting ARB issue? Wow! Yes with twrp. When you flashed twrp recovery , your device is now treated as K30 in twrp space
4. You mentioned https://forum.xda-developers.com/showpost.php?p=82502389&postcount=3 Telegram/Github where we can get official vendor zip which we can flash from TWRP, any links to that?check Pm , cant post telegram links here
5. Is there a Redmi K30 global ROM which I can use instead of Poco X2, they should be same right?Theres no K30 global.., poco x2 rom is global, k30 roms is china and there is eu custom rom based on chinese roms
Please share telegram or github link for vendor.zip which I can flash using TWRP. As crDroid has custom vendor may be that is why it works for me on EU ROM and I see other custom ROMs do not have vendor installed while flashing using TWRP.
Whenever you want to use custom rom without vendor , you need to flash either 11.0.0.7 zip or 11.0.0.7 vendor zip before flashing that custom rom
As a final resort will go to China ROM V11.0.15.0.QGHCNXM (this will be chinese right?) or this itself is global K30 ROM? Any links to global official MIUI K30 ROM, all I get is K30 chinese ROM
Sorry, I am asking too many questions, I do not want to brick phone in these times and go stand in queue at Mi service center during these times, when the servicing engineer will touch my phone all over
Click to expand...
Click to collapse
Check my replies in blue
coolcorner said:
As a final resort will go to China ROM V11.0.15.0.QGHCNXM (this will be chinese right?) or this itself is global K30 ROM? Any links to global official MIUI K30 ROM, all I get is K30 chinese ROM
Sorry, I am asking too many questions, I do not want to brick phone in these times and go stand in queue at Mi service center during these times, when the servicing engineer will touch my phone all over
Click to expand...
Click to collapse
It is a chinese rom. You can select english as your default language. It really doesn't matter as you are going to wipe it anyway if your purpose is to use it for flashing custom roms.
[Deleted]
coolcorner said:
Just now I tried flashing V11.0.15.0.QGHCNXM using Mi Flash tool, and I hit Anti Roll back error again. Not sure what I am missing here I am on same version 11.0.15.0 EU ROM which has same Anti 2, not sure why the error this time?
Click to expand...
Click to collapse
Bro If you want to use fastboot zip then you need to use https://www.xiaomitool.com/V2/ to overcome antirollback error. Connect device and enable usb debugging and proceed.
Mi flash tool doesnt work for poco.....you always get that rollback error.
For fastboot zips use above tool.
For recovery zips use twrp.
Both methods flash the same thing and twrp will be replaced with stock recovery.
---------- Post added at 08:36 AM ---------- Previous post was at 08:20 AM ----------
Vendor only zip.
[ fw_vendor_phoenixin_miui_PHOENIXININGlobal_V11_0_7_0_QGHINXM_9c232b802a.zip
Size : 1.12 GiB
Download : fw_vendor_phoenixin_miui_PHOENIXININGlobal_V11_0_7_0_QGHINXM_9c232b802a.zip
https://drive.google.com/uc?id=1-mIvf3EhtZwLl_rg1cFgZIp5Zz4QlQZu&export=download
Flash via twrp. If you get error 7/wrong device check updater script and change name
eagle06 said:
Bro If you want to use fastboot zip then you need to use https://www.xiaomitool.com/V2/ to overcome antirollback error. Connect device and enable usb debugging and proceed.
Mi flash tool doesnt work for poco.....you always get that rollback error.
For fastboot zips use above tool.
For recovery zips use twrp.
Both methods flash the same thing and twrp will be replaced with stock recovery.
Click to expand...
Click to collapse
Thanks, really appreciate your quick revert. I am trying out with xiaomitool now. I know TWRP method is simple, just edit/change the devicename. But, I am **** scared after seeing ARB error so many times. So using xiaomitool as you mentioned use it to overcome ARB error. I will update how it goes.
I thought Xiaomi is dev/custom dev friendly, seeing all these errors, no wonder why people resent MiUI so much, of course the hardware + price is good. From my search even Google on their devices is not this harsh about ARB blocking after unlocking bootloader.
eagle06 said:
Bro If you want to use fastboot zip then you need to use https://www.xiaomitool.com/V2/ to overcome antirollback error. Connect device and enable usb debugging and proceed.
Mi flash tool doesnt work for poco.....you always get that rollback error.
For fastboot zips use above tool.
For recovery zips use twrp.
Both methods flash the same thing and twrp will be replaced with stock recovery.
---------- Post added at 08:36 AM ---------- Previous post was at 08:20 AM ----------
Vendor only zip.
[ fw_vendor_phoenixin_miui_PHOENIXININGlobal_V11_0_7_0_QGHINXM_9c232b802a.zip
Size : 1.12 GiB
Download : fw_vendor_phoenixin_miui_PHOENIXININGlobal_V11_0_7_0_QGHINXM_9c232b802a.zip
https://drive.google.com/uc?id=1-mIvf3EhtZwLl_rg1cFgZIp5Zz4QlQZu&export=download
Flash via twrp. If you get error 7/wrong device check updater script and change name
Click to expand...
Click to collapse
Thanks for the vendor image link.
Oh! yeah I am back in Poco 11.0.7.0 image, xiaomitool worked without issues. Thanks to you!!
@eagle06 do you know in this entire image (attached file) list (from tgz file) which is fastboot file? The reason I ask is, in Poco X2 in fastboot mode I see a single deadpixel, whereas when I was in EU MIUI I never saw that dead pixel. I plan to replace that file with EU MIUI fastboot image file, so when am in fastboot, it is clean without any dead pixels.
That small white pixel in fastboot is normal. All users have it including me.
Pic
eagle06 said:
Pic
Click to expand...
Click to collapse
Yep right that is the one. When I was on EU Miui, that one did not have, hence asked which is the image file for fastboot, thought I would flash that or replace next time I flash Poco stock when I am installing new custom ROM.
Yes, its a trivial thing can be ignored, does not really bother or harm.
BTW, so now that I am back in Poco X2 stock (On top of that I have installed BlissROM), next time I have to flash I can use either TWRP or Xiaomitool/V2.
1. For TWRP, I need to rename devicename to phoenix from phoenixin in updater-script and flash it using TWRP after clearing data
OR
2. I can use Xiaomitool/V2 with ADB debugging on (same step as last time)
Just check fastboot getvar anti for my phone, it also says 2. There is no problem for me flashing china rom with miflash. I have successfully flashed it 4 times before.
Good to have another way of flashing - will try the xiaomitool next time. :good:
jngiag said:
Just check fastboot getvar anti for my phone, it also says 2. There is no problem for me flashing china rom with miflash. I have successfully flashed it 4 times before.
Good to have another way of flashing - will try the xiaomitool next time. :good:
Click to expand...
Click to collapse
Woah! Miflash tool kept throwing errors at me and you are saying it worked for you? Phew!!
If I had flashed using TWRP, I might have been holding a 200gm brick in my hands LOL. Got lucky by using Xiaomitool/v2 then Thanks to you. I will stick to Xiaomitool for flashing stock ROMs hence forth.
I have an interesting problem. I was using a11 stable beta official. I wanted to go back to aosp rom. I know it's impossible. But before, I was installing the official A10 rom global then install a11 aosp rom. It was working. But now, When I try to install Official rom by fastboot or recovery or mi flash tool, it stucks on boot. But interesting, I can install Abhix Rog edition rom and A11 official stable beta rom. I can't figure out this problem. I'm using orange fox recovery, also tried with TWRP. Whatever I tried that didn't work. Is there any advice for solution? Thanks in advance.
NOTE : Before, in recovery there are two folders sdcard and scard1.But now even I do format data, I only see only sdcard folder, there's no sdcard1 folder.
I solved the problem. I re-partition sdcard then format data. Then install 12.0.8.0 fw. Install havoc os 4.3 then flash dm-verity disabled then flash permissiver_v5...Boom works
hucar13 said:
I solved the problem. I re-partition sdcard then format data. Then install 12.0.8.0 fw. Install havoc os 4.3 then flash dm-verity disabled then flash permissiver_v5...Boom works
Click to expand...
Click to collapse
Hello! i am having the same problem. can you please help me with the repartitioning?
First Download the below files
1. TWRP
2. MIUI Firmware( Region wise)
3. Download Recovery Rom.
3. Download Fastboot Rom.
4. Download Mi Global Flash Tool.
5. Boot into Fastboot.
6. Flash TWRP. Install MIUI Firmware( would be around 80MB -100 MB Only) zip file.
7. install the Recovery Rom zip file. Format Data.
8. Reboot in to Bootloader.
9. Now open the Mi global flash tool and select the extracted Fastboot rom and click flash..
Hope this will solve the Problem
I have been struggling to install Pixel Experience Android 12 on my Poxo X3 NFC.
I had PE Android 11 before. When I tried to flash Android 12 I get following error
assert failed: update_dynamic_partition(package_extract_file("dynamic_partition_op_list"))
Updater process ended with ERROR: 1
Error installing zip file ...
What I tried
1, Install latest firmware
2. Format Data
3. Wipe data, dalvik, cache
3. Sideloading Custom Rom
Can someone help me to revive my device please?
Thanks a lot
Hello, on my wife's X3NFC I had to flash the latest Full ROM (12.5.7) via Fastboot.
Then I was able to install the lA12 PE. I don't know why I had to do this, but it worked.
She didn't like A12 PE and now A11 PE is running again on her Phone
Maybe (I heard about that) it works too, if you only flash the super.img from latest Fastboot-Image via Recovery.
SmartJuwel said:
Hello, on my wife's X3NFC I had to flash the latest Full ROM (12.5.7) via Fastboot.
Then I was able to install the lA12 PE. I don't know why I had to do this, but it worked.
She didn't like A12 PE and now A11 PE is running again on her Phone
Maybe (I heard about that) it works too, if you only flash the super.img from latest Fastboot-Image via Recovery.
Click to expand...
Click to collapse
I installed MIUI fastboot rom. Then I tried to flash PE A12 rom without any issues. But after successful completion, phone reboots to bootloader (Fastboot). Can you tell me what I am doing wrong?
Can you please give me steps to install PE after you've installed MIUI fastboot rom?
1st installed latest MIUI via MiFlash
Booting successful into MIUI
Flashing TWRP in Fastboot-Mode
Booting into TWRP, install ROM, wipe Caches and format data.
Reboot Phone
i'm in this very predicament. Still on PE11 Plus Edition and can't flash PE12 giving me the very same ERROR. Can someone pls post the sure way to get this done properly? Links to roms that must be flashed first would be very appreciated...
Snakeatermgs said:
i'm in this very predicament. Still on PE11 Plus Edition and can't flash PE12 giving me the very same ERROR. Can someone pls post the sure way to get this done properly? Links to roms that must be flashed first would be very appreciated...
Click to expand...
Click to collapse
SmartJewel (Post above you) told you how to do it