Greetings! I recently rolled the dice on an eBay purchase for a Light L16 camera. The device appears to have had some serious OS problems/botched root/adb commands/I am honestly not quite sure what has gone wrong with it, but it is not even showing the OS as LightOS (the camera OS). I was wondering if any of you might have the firmware laying around somewhere, or any experience flashing these devices with AOSP/variants?
I wish I could help. I'm in the same boat with a recent eBay L16 purchase. The one I received appears to be one of the early Beta cameras. It does boot. But the firmware is really old, so the camera won't save any images. I was able to sideload Open Camera, but it just crashes. I'll keep on looking for some updated firmware/ OS. Unfortunately, I believe finding that is highly unlikely once Light stopped all work on the camera and the Nokia Pureview. No one who worked on the project is even associated with Light any longer. Will post anything I possibly locate.
Thanks for the reply! I reached out to Light via the email addresses, but I'll be shocked if anyone replies. I tried reaching out to a couple of employees on LinkedIn as well, same result.
I think I got enough information pulled from adb to maybe attempt a LineageOS port. Is your device missing a ton of system options as well? I'm having to hammer this thing through command line.
Yes, mine is missing many options, based on what I know of the camera software's evolution. I had purchased one of the early production cameras back in 2017; since sold it when Light got out of the business.
My unit has LightOS-1,2,2_1 and firmware 428992. The biggest issue for me is the format of the lri RAW files changed over time and can no longer be read by the current Lumen software (can't find the old versions), basically making the camera useless.
I'm not very technical when it comes to Android, so you'd be doing a great service if you can make any headway. Thanks.
I've also had this problem recently,,, and it looks like that Light have completely abandoned the maintenance and support for L16, but I think since light L16 is an Android based device, then if we can get access to the firmware for the later models we should possibly being able to try and flush it in. I really don't know much about Android though....Anyway, so I hope that someone can find a solution for this as I really have no clue about it.
I have a production, working L16 with latest software -- in addition to what I believe is one of the early beta units from eBay. I'm not experienced enough to attempt to pull the firmware and software from the working one; all the commercial solutions fail. They seem to require an application to be loaded to the camera, which doesn't work.
I'm more than willing to devote more effort, if someone has a reliable solution, and could post the files.
I'm in the same boat as y'all. I just received an L16 I bought off of eBay with LightOS version 1.3.0.3-057 and camera firmware version 0039C80D. When I try to update it in the settings app I just get a "You have the latest software, there is no new update available." message.
If someone had the final V1.3.4.1 update files that we could download that would be amazing.
Hello, I also recently bought one off eBay. Interestingly enough, my error when trying to update is 'failed to query software information'.
LightOS-1.3.2.5-098 and Camera firmware 00624245.
Kernel version 3.18.20-perf-g40a11f1, [email protected] #1, Thu, Jun 21 18:35:48 PDT 2018.
Mike Heck said:
I have a production, working L16 with latest software -- in addition to what I believe is one of the early beta units from eBay. I'm not experienced enough to attempt to pull the firmware and software from the working one; all the commercial solutions fail. They seem to require an application to be loaded to the camera, which doesn't work.
I'm more than willing to devote more effort, if someone has a reliable solution, and could post the files.
Click to expand...
Click to collapse
If you have the latest (last) version of the firmware (1.3.4.1) you should be able to 'enable unknown sources' in the settings (see more info here) and then install APKs via the browser. This way you can install any companion app needed to dump the firmware.
It would be awesome to get the latest version.
Edit-spelling and links*
Update:
Reached out to Light on email and Twitter to see if we can get a offline update image/dump/apk.
Reached out to a few users on GitHub that owned L16 related repositorys to see if they still have their cameras and could create a firmware dump.
Had a look at the Android logs and can see that the updater is trying to reach out to this URL for an update: https://www.c2dms.com/api/v1/SWImage/SystemUpgrade
The website has shutdown by Google on July 30th, 2015, but before then the URL was changed to ota.c2dms anyway.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I understand there is a FB group.
I don't have a FB account, but maybe someone there can help.
I just got an L16, but need updates from OS 1306 to get it going.
Any help is really appreciated.
Same here I just my L16 new in the box with LightOS 1.3.0.6-083 and cannot update to the last OS Light pushed out.. Bummer.
It's a real bummer!
I've been calling the phone number for Light Labs for 2 weeks and emailing the CEO/Founder on a daily basis to ask for a link- I've heard nothing.
I'm returning mine.
Hey all, does anyone on this thread happen to have the offline Windows Lumen installer or know where I can find it?? Thanks!
it seems to have gone away in the last 2 weeks. It was here:
Light support - User guide | Light
Light's Support Center provides an in-depth FAQ to help customers find answers to their questions, as well as how-to guides and step-by-step tutorials for the Light L16 camera and associated Light software.
support.light.co
I have a Mac copy I downloaded a few weeks back if it helps you.
handymike said:
it seems to have gone away in the last 2 weeks.
I have a Mac copy I downloaded a few weeks back if it helps you.
Click to expand...
Click to collapse
Better than nothing haha. I can always spin up a Mac VM on one of my servers if I don't find the Windows package.
*edit* And I guess that explains why I can't find it posted anywhere if they took it down so recently.
It appears that though the page linking to them has been taken down, the actual files are hosted on dropbox, and can be found using the wayback machine. Linked here:
Mac
https://light.app.box.com/s/mlu554z1xv2bt9xel8v0f4otd0hl0z55PC
Box
light.app.box.com
These may disappear soon too, so I am including a zip of both of them here as well.
Edit: Adding a link to the most recent Wayback Machine save of the download page
Light Lumen Download
web.archive.org
If only the firmware and OS updates were there too.
I wish. I'm still stuck on version 1.3.0.6-083 (Late January 2018). I think others are on lower versions than that, but unfortunately I'm new to all this and don't know how to dump such things, or how useful it would be,
BrailleCortex said:
It appears that though the page linking to them has been taken down, the actual files are hosted on dropbox, and can be found using the wayback machine. Linked here:
Mac
https://light.app.box.com/s/mlu554z1xv2bt9xel8v0f4otd0hl0z55PC
Box
light.app.box.com
These may disappear soon too, so I am including a zip of both of them here as well.
Edit: Adding a link to the most recent Wayback Machine save of the download page
Light Lumen Download
web.archive.org
Click to expand...
Click to collapse
Thanks so much.
I'm receiving brand new ones, no idea the firmware that will be. If I can help get a firmware image off them, I will.
kuau said:
Same here I just my L16 new in the box with LightOS 1.3.0.6-083 and cannot update to the last OS Light pushed out.. Bummer.
Click to expand...
Click to collapse
Does this prevent you from doing anything? Does the Lumen software not support the image format used by this firmware version?
Related
Trackmyshares is an equity portfolio tracker.
With Trackmyshares you can keep your equity portfolio under control using this easy to use program. This Windows based solution will grab (Delayed) equity prices to show you your bottom line Profit & Loss at the touch of a button. Start the app, add some symbols and Get Tracking, It couldn't be simpler! *Please note this application requires an active data connection to retrieve equity prices*
Features:
Input an unlimited number of equities to your portfolio
Keep up to date with the latest prices on-the-go
Get instant portfolio valuations
Friendly user interface and optimized screen layout
15 minute Delayed Prices
Optimised for the HTC LEO
Prerequisites .NET 3.5
The demo is valid until 30th April 2010. If you like the application you can download it from the Windows Marketplace....Name = Trackmyshares
Installation:
Download the mobile installer (.cab file) to your desktop. Sync with your mobile phone and copy the .cab installer to your phone. From your phone go to Programs -> File Explorer, navigate to the .cab file and select it. The Installer should do the rest.
Questions / comments / bug reports are welcome.
* please post on this thread, and not on a private message
* report any error messages you got from the software
* when reporting first check if your question haven't been asked or your bug haven't been reported yet.
* don't forget to mention your type of device, os/rom version and type of internet connection used.
UPDATE 24.MAR.2010
Screenshots can be viewed by visiting my website trackmyshares.co.uk, I'm a noob so I cannot link to outside urls for my images ;(
UPDATE 28.APR.2010
REMINDER: The demo is valid until 30th April 2010. If you like the application you can download it from the Windows Marketplace....Name = Trackmyshares. If you want to preserve your portfolio, please ensure that you make a copy of the stocks.xml file which can be located in the program files\Trackmyshares folder, and then copy it back once you have purchased the app.[/B][/U]
UPDATE 24.JUN.2010
REMINDER: The demo is valid until 31st July 2010. If you like the application you can download it from the Windows Marketplace....Name = Trackmyshares. If you want to preserve your portfolio, please ensure that you make a copy of the stocks.xml file which can be located in the program files\Trackmyshares folder, and then copy it back once you have purchased the app.[/B][/U]
sounds nice. please share some screenshots thanks
Here you go:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Looks pretty good
Hope you can have pricing similar to iphone apps of $1 ? *wishful thinking?*
It would be a definite buy if you can do something similar to bloomberg portfolio tracker.
I am accessing that currently from opera and the whole portfolio fits into the screen in landscape mode perfectly
I buy shares in Hongkong, Singapore, Australia and denominate them in Singapore dollars.
Hi wj888,
The app is currently on the UK marketplace for £3.19 . It has similar functionality to the bloomberg portfolio tracker, but it looks like my information has been spread over two main screens instead one wide landscape screen. I dont record the purchase date or the % portfolio but everything else is the same. These two changes I could make relatively easily.
The stocks that you can access are limited to what is available on the yahoo finance website, due to that being the underlying data source.
Thanks for your post.
works great (hd2), thanks a lot
troyantonio said:
The stocks that you can access are limited to what is available on the yahoo finance website, due to that being the underlying data source.
.
Click to expand...
Click to collapse
Is it possible for you to add a feature where the data source could be pulled from somewhere else? Some of my stocks are not available on the yahoo finance website (Helsinki, Oslo, Stockholm Exchanges)
Hi there it may prove to be a bit difficult since I may end up with a situation of one data source per stock exchange but I will investigate.
Thanks.
troyantonio said:
Hi there it may prove to be a bit difficult since I may end up with a situation of one data source per stock exchange but I will investigate.
Thanks.
Click to expand...
Click to collapse
Would be extremely useful if end-users can actually choose their data source from a list of sources. A working version with me a green YES for me
Not working on my Tilt 2 ?
I purchased and downloaded the software from marketplace.The application opens, I go to share finder to search stock tickers and add to portfolio.Finds ticker symbols fine
It shows items were added to portfolio.I go back to main poage and none of my stocks show up.I try to EDIT PORTFOLIO or Valuation but they are greyed out.
Quotes delayed is permanently at the bottom.
When I explore the stocks.xml file it is blank.
Am I missing something obvious?
Does PUSH INTERNET need to be enabled?
I disabled the Push Internet feature from my phone to save sys resources.
Thanks
Ron
Clicking refresh in the bottom left hand corner should update your portfolio for you.
Hi Tony
Not sure why post didnt make it.I am
to search stocks,add to portfolio but hit the BACK button and there are no stocks displayed for the portfolio. So refresh does nothing.
Perhaps bad download from markeplace.Is their still a trial one to download.Not sure if there is still going to be another problem
troyantonio said:
Hi wj888,
The app is currently on the UK marketplace for £3.19 . It has similar functionality to the bloomberg portfolio tracker, but it looks like my information has been spread over two main screens instead one wide landscape screen. I dont record the purchase date or the % portfolio but everything else is the same. These two changes I could make relatively easily.
The stocks that you can access are limited to what is available on the yahoo finance website, due to that being the underlying data source.
Thanks for your post.
Click to expand...
Click to collapse
Hello all. i can't find this app. on marketplace !!!
any link for working app?
thxs. rgds
Modesty
I'd like to be able to trial this software but it doesn't seem to work. Past the evaluation date, perhaps?
May I suggest you post a trial version so people like me can test before purchase?
Thanks!
Knobhead said:
I'd like to be able to trial this software but it doesn't seem to work. Past the evaluation date, perhaps?
May I suggest you post a trial version so people like me can test before purchase?
Thanks!
Click to expand...
Click to collapse
Hi Knobhead, a new trial version has been uploaded which expires at the end of July.
Any feedback is appreciated.
troyantonio said:
Hi Knobhead, a new trial version has been uploaded which expires at the end of July.
Any feedback is appreciated.
Click to expand...
Click to collapse
hello
can u give us the cab of new trial as there's no such app on Marketplace.
thanks, Modesty
Hi Knobhead I overwrote the existing one that has been uploaded at the top of the site
troyantonio said:
Hi Knobhead, a new trial version has been uploaded which expires at the end of July.
Any feedback is appreciated.
Click to expand...
Click to collapse
Doesn't seem to offer a lot more than the built-in stock tracker.
Graphs would be great. (Like TinyStocks)
Multiple portfolios would be very wecome. (Again like TinyStocks.)
Think I'll stick with the latter for now but I really like the interface. Best of luck!
Hi Knobhead, thanks for your feedback and enhancement list, which I will try and take on board when porting the app to WinMo 7. The U.S.P of the app is to allow you to track your investment exposure to your equity portfolio on a single share basis or across your entire stock holdings.
I will take a look at Tiny stocks and do some gap analysis. Cheers
Tmobile USA just released their ROM update! The download link is on Pocketnow.com
thanks downloading now...
Anyone knows what chagnes are made with this new ROM?
i would also like to know this..
tried searching for a changelog... but nothing...
now i guess its up to the hd2 users, to report
can someone please share imei/serial number to download, please?
RE795 said:
can someone please share imei/serial number to download, please?
Click to expand...
Click to collapse
I'm with you. I'd like to test it too.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I will host it for a while since rapidshare wont let me upload over 200mb
I take no responsibility for this software, install at your own risk. I have installed it myself successfully and so far its much faster then the original stock rom it shipped with.
===============================+++================
1. Download the new software to your PC.
2. Ensure ActiveSync 4.5 for computers using Windows XP or earlier or use Windows Mobile Device Center for computers using Vista and Windows 7 is installed on your PC. If you have not installed ActiveSync or Windows Mobile Device Center, you can install it from your Getting Started CD or download it from the Microsoft website.
3. Connect your HTC HD2 to your computer using the USB Sync Cable that came with the phone.
4. Establish a connection. You will know this is complete when the ActiveSync or Windows Mobile Device Center icon in your PC taskbar is lit green and the status is "Connected".
5. Ensure that your T-Mobile HTC HD2 has a battery charge that is greater than 50% (two bars).
6. Remove your MicroSD card from the device if you have one inserted. Do not reinsert the SD card until after the software installation process is complete and the phone is ready to use.
7. Run the software update program you downloaded to your PC and follow the on-screen commands.
www.collectedchaos.com/xda/T-Mobile_HD2_MR Software_2.13.531.1.exe {[Size]: 206mb (216,194,411 bytes) [CRC]: F5B75604 [Md5]: aeac64fb27031abeea26404b641aea29}
http://dl.htc.com/ruudownload/t-mobileUS/DeviceDownloads.aspx?pid=leo Offical HTC Download
Does this Rom update delete all my edits done with registry editor and other tweaks? Thanks
hensond67 said:
Does this Rom update delete all my edits done with registry editor and other tweaks? Thanks
Click to expand...
Click to collapse
yes, this will reset your device to the new stock settings. everything will have to be reconfigured and reinstalled.
Are you noticing any change in screen sensitivity with this rom?
What is the spl version?
does anybody know if this ROM update will make some of my current ROM apps un-usuable
such as dafunks taskbar, CHT?
Please note that this is unofficial release. I thought of taking the plunge because I thought it was from TMobile. I read somewhere (I forgot where) that it was released for beta testing to a select group and it was simply leaked to the mass by pocketnow.com. I think I will wait until TMobile officially releases the update.
Please do not quote me! I am just sharing what I read. Source: Twitter (not the most reliable source).
k8sh said:
Please note that this is unofficial release. I thought of taking the plunge because I thought it was from TMobile. I read somewhere (I forgot where) that it was released for beta testing to a select group and it was simply leaked to the mass by pocketnow.com. I think I will wait until TMobile officially releases the update.
Please do not quote me! I am just sharing what I read. Source: Twitter (not the most reliable source).
Click to expand...
Click to collapse
Thanks for the update, i think i'll wait too
honestly, i dont have lag issues with my current ROM
good stuff!
this fixes my sms issues! i posted more in the general forum though. i love this upgrade. i was curious though why it wasn't officially on tmoble or htc website. guess ill just check the rev when it does come out though and re mod my phone up again for the 50th time!
I called T-Mo tech support this morning regarding the ROM update. Here is what I was able to gather.
1. The ROM update has NOT been released by T-Mo. The release date is scheduled for the 22nd of May, But an inner office memo said it could be as early as the 18th.
2. Yes this will return your phone back to stock settings, and you will have to reinstall all mods done to the phone.
3. This fixes several issues including but not limited to.
a, SMS lag and locking up the phone.
b, Internet down loads stopping in mid transfer/locking up the phone.
c, over all stability and speed of the phone.
The 3 points above is all the tech could tell me. He did say that once the ROM is released to the public, they will have a "full list of fixes".
He also did say this. By installing the ROM onto your phone before the official release. You are voiding the insurance (if you have it) policy. He strongly suggested to not install it at this time unless "you are having issues with your phone, and you are directed by a T-Mo tech op to install it.
Thats all I was able to get from T-mo this morning.
This is from offical Tmobile web site
ftp://66.185.19.164/T-Mobile_HD2_MR Software_2.13.531.1.exe
It's directly from tmobile website, you will need to put IMEi number
I got this directly from htc, t-mob might not be releasing it but according to htc its done and ready.
htc link:
http://dl.htc.com/ruudownload/t-mobileUS/DeviceDownloads.aspx?pid=leo
I have not encountered any issues with cht 1.7.1 or chte 1.7.1.2 actually weather animations are snapper then before that I think I will leave them on now.
spl version is still 2.10.0000 and screen sensitivity good but i'm more impressed by a much better swype version.
My Tmobile Leo is unlock. Will the Rom update lock it back?
I downloaded the update yesterday, and I've gotta say that is has been nothing but great for me. I don't have anymore lock-ups, slow downs, texting works right now. Facebook, twitter, and the net all starts up, and runs smooth now. Last thing... weather animations no longer lag. It actually runs pretty fast now.
Official Now
Looks like it just became official. You can go to T-Mobile's site for the download now.
The update notification just popped up on my tablet and when i tapped on it this is what I saw....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://twitpic.com/392wxm
Blah Blah??? Seriously????
I'm going through with the update regardless
EDIT: Update unsuccessful. Tried manually checking for updates and it said I am up to date with 2638. Guess they were just testing the deployment.
I did the same thing as you but manually, and I got the same thing! I think the guys at viewsonic was testing the update app and what not to see if it would pick up information so that it will either automatically download this new update or manually allow the user to update it. I like there test msg information "Blah Blah". Now when I check it says you have updated software, guess at midnight we will see!!!!
At least it's being tested. I half expect them to delay this again.
roebeet said:
At least it's being tested. I half expect them to delay this again.
Click to expand...
Click to collapse
trinikartel said:
Blah Blah??? Seriously????
Click to expand...
Click to collapse
Haha, that's awesome. From a dev standpoint, I understand where those "blah blah" sort of test messages come from.. Now, the fact that they tested it live in production with that message..
they're testing the distribution of the update. thats a good sign.
has anyone given them a call yet today?
And Pocketgear hasn't updated their website to reflect Viewsonic as a selectable device.
I'm trying to hold out from calling them for at least a few hours --
I think they have my phone number listed on their wall.... "don't answer if this guy calls!"
NewbTrader said:
Haha, that's awesome. From a dev standpoint, I understand where those "blah blah" sort of test messages come from.. Now, the fact that they tested it live in production with that message..
Click to expand...
Click to collapse
At least one person here got svn #13 on Thursday night. That tells me that they have no UAT environment, they test live in production as you mentioned.
I haven't got anything yet. I'm connected to wifi at startup and this is what it says:
Current Version: Flextronics/harmony/harmony/:2.2/FRF91/hudson-20101023-135552-TnT_SVN_2638:user/testkeys
I have not modified it yet.
5 minutes after I posted this, I clicked on the Tap UI and it started to update for about a minute but then got an error saying network unavailable even though I was connected. Could it be their network it was referring too?
Update
I just picked my g tab up this past weekend. It is still stock as I heard there was an update coming and wanted to wait to see what it would be.
I powered the device on today and the first time it connected via the tap download app. It looked as if it was preparing to download then my wife would cut out and there would be an error saying it attempted the max 3 times. I reset the device and wife and tried again, this time said it was up to date.
Called G tab support and they had me do a factory reset (no biggie, nothing saved yet) and then had me switch the wifi sleep to never and display timeout to never. Tried again and got same error. They said this has been happening and that it may take some time today for it to go through correctly. Just an update
Getting the same max try error as the poster above. If someone gets it, (pretty) please post the update.zip file (assuming that's what it is) that you get.
lintmail said:
Getting the same max try error as the poster above. If someone gets it, (pretty) please post the update.zip file (assuming that's what it is) that you get.
Click to expand...
Click to collapse
If it's anything like the last update, I don't think there will be an update.zip to get. You just get a notice that it's available, click on download, install it, and reboot.
I'm not getting any feedback. I click on Tap UI update and it just tells me it's up to date.
jmfrost said:
If it's anything like the last update, I don't think there will be an update.zip to get. You just get a notice that it's available, click on download, install it, and reboot.
Click to expand...
Click to collapse
Yeah, but it has to download something, so we're wondering what the actual process is.
My guess is that it pushes down an update.zip, does a checksum at the end to ensure its not corrupt, then reboots you into recovery to run it (and probably delete it at the end). Again, just a guess.
roebeet said:
Yeah, but it has to download something, so we're wondering what the actual process is.
My guess is that it pushes down an update.zip, does a checksum at the end to ensure its not corrupt, then reboots you into recovery to run it (and probably delete it at the end). Again, just a guess.
Click to expand...
Click to collapse
I agree. I just don't recall finding anything on mine during the last update. Over course, I was in the process of a couple different mods after, since it didn't really fix anything for me, and I could have easily overlooked it. I'll pay more attention this time for sure.
sidebar: I'm sure at some point the Pocketgear store will require some sort of registration. So I went ahead and registered an account so that much was already setup when I do finally get the update. Viewsonic is still not listed as a supported device though.
Okay I spoke to CS (not too crappy relatively speaking) and they were not helpful. The CS rep said they do not plan on posting any file for manual updates. He suggested I just keep trying (sigh). I asked him to please post the file, he said there was discussion with devs re this issue.
I asked him about a changelog and he said there would be: a new new UI update program (yeah), some new apps like facebook and kindle, fixes to weather/news and time (real yeah!), app program for "Handango" (interesting change there), and perhaps some other tidbits. I asked him to please post that somewhere so I could refer back to it. He said he would look into it.
allegedly it is going out and some units have already gotten it - at least as per CS. As to how the TnT updater decides on which devices need it, I don't know.
If anyone actually gets this update, please advise the group. So far I've seen zip -- nada -- nothing.
EDIT: I know CS is probably watching this thread - you'll be getting a call at 5PM ET if my device is not updated, and this time I'm not going to be a happy customer. Please get these TnT developers to push this out already, we've been waiting since Friday.
I didn't bring the G to work. I'll probably flash back to stock tonight and see if I can get the update and see how big of an improvement it makes. I'm still deciding if I'm going to keep this or take it back...
Just fired my gtablet up about 1pm Central time. No update yet. I am 100% stock.
JR
Get your OTA update here, and your full image here.
Edit: changed thread name.
Is the developer preview daily driver material or is it rather buggy anyone who's used it for at least a day want to give their opinions
[email protected] said:
Is the developer preview daily driver material or is it rather buggy anyone who's used it for at least a day want to give their opinions
Click to expand...
Click to collapse
Yes it is. I have not had a single issue with it. After sideloading the OTA, there was a message about registering my sim. My guess would be it was looking for an esim, which I don't have, but after that my sim was recognized and all has been running smoothly.
works fine for me, the only issue I've found is with GooglePay, where it doesn't allow me to add a credit card.
On a good note, they implemented VoLTE services with my network provider (TIM Italy) not available on Android O/10
saluti, mario
superdild said:
works fine for me, the only issue I've found is with GooglePay, where it doesn't allow me to add a credit card.
On a good note, they implemented VoLTE services with my network provider (TIM Italy) not available on Android O/10
saluti, mario
Click to expand...
Click to collapse
Developer previews never pass SafetyNet. Just an FYI.
Sent from my Pixel 3a XL using XDA Labs
---------- Post added at 02:46 PM ---------- Previous post was at 02:46 PM ----------
Also, just a side note to anyone wondering. You can't install the DSU while on a custom rom :crying:
Sent from my Pixel 3a XL using XDA Labs
Getting error 21 while sideloading from adb
Any help ?
I use developer preview 1, I still don't receive OTA update to second realise. What I have to do?
spoke90s said:
I use developer preview 1, I still don't receive OTA update to second realise. What I have to do?
Click to expand...
Click to collapse
You won't get an ota ota's won't be available till beta comes out
So you have to manually install ota images via fastboot on a PC or sideload the ota image instructions are on Google website if you need it
[email protected] said:
You won't get an ota ota's won't be available till beta comes out
So you have to manually install ota images via fastboot on a PC or sideload the ota image instructions are on Google website if you need it
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Well I look smart haha thanks for correcting me good person @spoke90s
[email protected] said:
You won't get an ota ota's won't be available till beta comes out
So you have to manually install ota images via fastboot on a PC or sideload the ota image instructions are on Google website if you need it
Click to expand...
Click to collapse
Actually, if you have dp1 installed, they sent out an OTA
just update to bonito-ota-rpp2.200227.014 via ota
Now google Pay is active
saluti, mario
is it me, or Google is making android uglier than ever, Most people may not be able to tell, but i have both iphone and pixel 3a xl
dryspuri said:
is it me, or Google is making android uglier than ever, Most people may not be able to tell, but i have both iphone and pixel 3a xl
Click to expand...
Click to collapse
Well the Google people that picked the theming colors should be shot. It's like it's Easter all the time. I have to root and use a hack to get decent theme colors
adm1jtg said:
Well the Google people that picked the theming colors should be shot. It's like it's Easter all the time. I have to root and use a hack to get decent theme colors
Click to expand...
Click to collapse
Exactly, Colors are all over the place, notifications are a mess, user friendliness has gone for a toss, android auto is ****, its almost begging users to switch to iOS, its a bloody shame, seems like no body is incharge, and everyone in all departments are experimenting forever.
Dont even start about play store!!
Apps look horrible forever. Believe me people will easily buy Pixel if only google appoints one person for whole os rather than army of different people with different ideas.
adm1jtg said:
Well the Google people that picked the theming colors should be shot. It's like it's Easter all the time. I have to root and use a hack to get decent theme colors
Click to expand...
Click to collapse
what theme colours are you using!!
dryspuri said:
what theme colours are you using!!
Click to expand...
Click to collapse
I use an amber color FFA000
I regret installing the android preview. It is very buggy and for some reason when I use YouTube it starts scrolling thru the comments section without me touching the screen.
I have to agree, android has gotten pretty ugly. Remember Honeycomb? It was kind of rad in it own rights. Had a color scheme, they introduced the Roboto font, the wallpapers looked like they all belonged to a pack and nit just random stock images of bubbles. Holo kept everything uniform. It seemed to be the 1st and last time they had a clear concise vision for an OS.
Hell, the little android guy was a bee lol.
chivamex10 said:
I regret installing the android preview. It is very buggy and for some reason when I use YouTube it starts scrolling thru the comments section without me touching the screen.
Click to expand...
Click to collapse
Why did you install it? IT'S A DEVELOPER RELEASE! You experienced exactly what is expected. The release is PRE-BETA and for developers and enthusiasts to test and report issues. In other words, you are suppose to experience bugs - that's the whole purpose of the release.
Did you even report your issues? Probably not. I'm sure it was just easier to come online and complain about your experience.
Fired the phone up to find even the simplest games (Candy Crush!) freeze for a second over and over (audio, also) while playing, never mind even trying to load Genshin Impact. Reset twice and still the same. It even affects YouTube vidoes, hell, ANY video. Red Magic US Canada site is wonky and very difficult to get hold of someone or even a return form. Anyone else having this problem?
jeepguynola said:
Fired the phone up to find even the simplest games (Candy Crush!) freeze for a second over and over (audio, also) while playing, never mind even trying to load Genshin Impact. Reset twice and still the same. It even affects YouTube vidoes, hell, ANY video. Red Magic US Canada site is wonky and very difficult to get hold of someone or even a return form. Anyone else having this problem?
Click to expand...
Click to collapse
With gaming performance I don't have any issue and no stuttering at all. Are you running the game with game space switch on?
What is btw your software version here in Europe it's NX709J_EUcommon_V4.08
Yes, Game Space, everything. Even videos stall. I think I just got a bad one, but getting hold of soemone to return is a nightmare. Hmmm...my version is NX709J_UNcommon_V3.08 with no option to upgrade.
jeepguynola said:
Yes, Game Space, everything. Even videos stall. I think I just got a bad one, but getting hold of soemone to return is a nightmare. Hmmm...my version is NX709J_UNcommon_V3.08 with no option to upgrade.
Click to expand...
Click to collapse
hmm kinda weird i hope they provide the full rom for Global version on the site. or maybe a update with some fixes but we already know that the software support on redmagic phones are bad.
I THINK I finally figured it out. Once you set everything up and update apps, there is ANOTHER prompt to Finish Setting Up Your RedMagic Pro 7. If you hit that, it really doesn't do anything other than says it's finishing up, and after it's done THAT's when the stuttering begins on videos and games. Unfortunately, the prompt keeps popping up daily, which you can dismiss but only for the day, as it rears its head the next day. Anyway, working fine now and I really like the phone. But beware, good luck getting anything other than canned responses from the Nubia support line. I kept insisting I wanted to return the phone and they kept asking additional questions about the make/model, etc. which was just going to continue until the 2-week return period was up. If anyone discovers a way to delete this prompt, please let me know.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
jeepguynola said:
I THINK I finally figured it out. Once you set everything up and update apps, there is ANOTHER prompt to Finish Setting Up Your RedMagic Pro 7. If you hit that, it really doesn't do anything other than says it's finishing up, and after it's done THAT's when the stuttering begins on videos and games. Unfortunately, the prompt keeps popping up daily, which you can dismiss but only for the day, as it rears its head the next day. Anyway, working fine now and I really like the phone. But beware, good luck getting anything other than canned responses from the Nubia support line. I kept insisting I wanted to return the phone and they kept asking additional questions about the make/model, etc. which was just going to continue until the 2-week return period was up. If anyone discovers a way to delete this prompt, please let me know.
Click to expand...
Click to collapse
Have you tried updating the phones the firmware on the site is newer version.
You can download the zip file on your phone and update the phone using the local software update mode.
Maybe you can clear the cache of the Google apps.
For me the Google play store system update is stuck on December update for now.
I've cleared the cache on just about everything. Stupid question, but where can I find the firmware version on my phone? I dont see it anywhere under About Phone
jeepguynola said:
I've cleared the cache on just about everything. Stupid question, but where can I find the firmware version on my phone? I dont see it anywhere under About Phone
Click to expand...
Click to collapse
Go to system update and you will see the region and the version .
i had this same problem on my redmagic 7. I posted a youtube video that i had to show to the redmagic repair. I ended up sending it back for a refund and getting the redmagic 7 pro.
I finally figured it out, after the setup, it came back with a "Finish setting Up Your Phone" prompt, which caused the stuttering after reboot. There was nothing else to set up anyway, so I reinstalled, ignored the prompt and disabled the Android Set-Up function, buried somewhere deep. It worked and since the recent updates have had no problem whatsoever. Nubia help is awful they just keep repeating things and telling me they're working on it.
Koudy69 said:
Have you tried updating the phones the firmware on the site is newer version.
You can download the zip file on your phone and update the phone using the local software update mode.
Maybe you can clear the cache of the Google apps.
For me the Google play store system update is stuck on December update for now.
Click to expand...
Click to collapse
I've got the NX709J... running on
NX709J_UNCommon_V3.19 and I'm having same issue... Wasn't doing it on the previous version 3.17.. you can try updating using ADB.. work for me
Dont update from 4.17 to 4.19
This update broken stability system.
Now shuttering phone. when browsing the internet, do i generally feel that the system is not running smoothly now.Phone charging slowed when temperature is above 40 ° from 100w to 50-70w. is it possible to roll back the updates? without losing data?