Related
Hi,
I have a Mate 9 , Build No. MHA-L09C432B182
Baseband is 21.516.00.00.010
Kernel: 4.1.18-g0ad0fb3
I unlocked bootloader, it is defenetely unlocked. I am able to install TWRP.
I installed twrp-3.0.2 and also twrp-3.1.0 versions but have same problems in both versions:
filenames/folder names in /sdcard (internal storage) are broken, I mean their original names are gone, all files and folders are named like imbj9yf1fATc4Tvm5zt+ and so on instead of Screenshots for example.
So I cannot find my supersu.zip but however I think it would not install, because of this error:
Also I cannot run a TWRP backup, it shows:
Backup started
Backup Folder /data/media/0/TWRP/Backups/UGM2171100001069/2017-07-21-13-11-39_NRD90M...
Can not create '/data/media/0/TWRP' folder (Permission denied)
Failed to make backup folder
I tried to CHMOD 755 this folder/path, did not work/help
Can anybody help me here?
Thx and best!
/data is encrypted by default using file based encryption. That's why you see those files in /sdcard (/data/media/0/). You can remove encryption by using Wipe - 'Format Data' button.
This will remove everything in /data including your files in /sdcard.
To flash stuff you can use an external SD card or remove encryption or flash this twrp: https://mega.nz/#!xg9hWbpJ!dNOWJVUuD_4JL8N8PiDXYsj3SnvaOfKxBndvWc_4wgo
and adb push (adb push file.zip /cache/file.zip) to /cache and flash from there. /cache is added as storage with that twrp.
If you want to remove encryption, flash official SuperSU 2.82 SR1: https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
Or Magisk 13.3: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Both require at least twrp 3.1.0.
If you chose to remove encryption you will also have to flash public and HW zips after Format Data, because files in /data/hw_init are removed which are needed for themes to work and 'System Update' and a few Huawei apps.
Public zip for L09C432B182:
http://update.hicloud.com:8180/TDS/...55/f1/full/public/update_data_full_public.zip
Hw zip for L09C432B182: http://update.hicloud.com:8180/TDS/...04/v84355/f1/full/hw/eu/update_full_hw_eu.zip
Flash public first then hw. Both will give errors but install fine.
If you don't want to remove encryption you won't be able to backup /data.
If so use this SuperSU: https://mega.nz/#!18FW1QTQ!3DCA3KrIUSRqEu4L-expci4HcKtk6F25fE1u6ecJV9Q
Or magisk 13.3: https://mega.nz/#!I4FQzbyA!gBZelHmD3lGGwzGISUXkf7GQTUAq5i785d_qPHQOaVE
thanks for all your info.
Can you suggest what to do? Acutually I just want to install root to get titanium to work because I have older backups I want to look into to. After that I want to unroot again.
Not sure if i need encryption or if ishould decrypt now
Whats the best way for me now?
ante0 said:
/data is encrypted by default using file based encryption. That's why you see those files in /sdcard (/data/media/0/). You can remove encryption by using Wipe - 'Format Data' button.
This will remove everything in /data including your files in /sdcard.
To flash stuff you can use an external SD card or remove encryption or flash this twrp: https://mega.nz/#!xg9hWbpJ!dNOWJVUuD_4JL8N8PiDXYsj3SnvaOfKxBndvWc_4wgo
and adb push (adb push file.zip /cache/file.zip) to /cache and flash from there. /cache is added as storage with that twrp.
If you want to remove encryption, flash official SuperSU 2.82 SR1: https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
Or Magisk 13.3: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Both require at least twrp 3.1.0.
If you chose to remove encryption you will also have to flash public and HW zips after Format Data, because files in /data/hw_init are removed which are needed for themes to work and 'System Update' and a few Huawei apps.
Public zip for L09C432B182:
http://update.hicloud.com:8180/TDS/...55/f1/full/public/update_data_full_public.zip
Hw zip for L09C432B182: http://update.hicloud.com:8180/TDS/...04/v84355/f1/full/hw/eu/update_full_hw_eu.zip
Flash public first then hw. Both will give errors but install fine.
If you don't want to remove encryption you won't be able to backup /data.
If so use this SuperSU: https://mega.nz/#!18FW1QTQ!3DCA3KrIUSRqEu4L-expci4HcKtk6F25fE1u6ecJV9Q
Or magisk 13.3: https://mega.nz/#!I4FQzbyA!gBZelHmD3lGGwzGISUXkf7GQTUAq5i785d_qPHQOaVE
Click to expand...
Click to collapse
thanks for all your info.
Can you suggest what to do? Acutually I just want to install root to get titanium to work because I have older backups I want to look into to. After that I want to unroot again.
Not sure if i need encryption or if ishould decrypt now
Whats the best way for me now?
tobyffm said:
thanks for all your info.
Can you suggest what to do? Acutually I just want to install root to get titanium to work because I have older backups I want to look into to. After that I want to unroot again.
Not sure if i need encryption or if ishould decrypt now
Whats the best way for me now?
Click to expand...
Click to collapse
Then don't bother with decryption.
So you basically just have to place the root of your choice (of the mega ones I linked, because the official ones will remove encryption in your boot image and you will boot loop if you flash the official ones) on an external SD or transfer to /cache with adb after flashing the linked twrp. Then flash root and you're good to go.
I think you can sideload root zip, I haven't tried it. But that's another possibility if you don't have an external SD.
ante0 said:
Then don't bother with decryption.
So you basically just have to place the root of your choice (of the mega ones I linked, because the official ones will remove encryption in your boot image and you will boot loop if you flash the official ones) on an external SD or transfer to /cache with adb after flashing the linked twrp. Then flash root and you're good to go.
I think you can sideload root zip, I haven't tried it. But that's another possibility if you don't have an external SD.
Click to expand...
Click to collapse
Yes, it worked, i flashed supersu and got root acccess now, thx very much.
About unrooting later on, i understand I need to download the full stock rom, create a dload folder and copy update.app into it and reboot phone to download mode. It then will install stock rom and stock recovery, correct?
Will this erase internal storage again same like when unlocking bootloader?
thx!
tobyffm said:
Yes, it worked, i flashed supersu and got root acccess now, thx very much.
About unrooting later on, i understand I need to download the full stock rom, create a dload folder and copy update.app into it and reboot phone to download mode. It then will install stock rom and stock recovery, correct?
Will this erase internal storage again same like when unlocking bootloader?
thx!
Click to expand...
Click to collapse
No need (dload doesn't work anyway, except for AL00C00B115 and L29C636B136). You can uninstall using the SuperSU app or manually by removing /data/SuperSU.apk and restoring stock boot image. Boot image can be extracted from update.app for your model using Huawei Update extractor. Same goes for recovery. If you want to lock bootloader you have to install an update/same build number, you could use Firmware Finder for that or this tool: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
In my experience it will not remove apps, but data seems to go poof (as in app settings and data). Unlocking bootloader again will remove apps though as it does a factory reset.
ante0 said:
/data is encrypted by default using file based encryption. That's why you see those files in /sdcard (/data/media/0/). You can remove encryption by using Wipe - 'Format Data' button.
This will remove everything in /data including your files in /sdcard.
To flash stuff you can use an external SD card or remove encryption or flash this twrp: https://mega.nz/#!xg9hWbpJ!dNOWJVUuD_4JL8N8PiDXYsj3SnvaOfKxBndvWc_4wgo
and adb push (adb push file.zip /cache/file.zip) to /cache and flash from there. /cache is added as storage with that twrp.
If you want to remove encryption, flash official SuperSU 2.82 SR1: https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
Or Magisk 13.3: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Both require at least twrp 3.1.0.
If you chose to remove encryption you will also have to flash public and HW zips after Format Data, because files in /data/hw_init are removed which are needed for themes to work and 'System Update' and a few Huawei apps.
Public zip for L09C432B182:
http://update.hicloud.com:8180/TDS/...55/f1/full/public/update_data_full_public.zip
Hw zip for L09C432B182: http://update.hicloud.com:8180/TDS/...04/v84355/f1/full/hw/eu/update_full_hw_eu.zip
Flash public first then hw. Both will give errors but install fine.
If you don't want to remove encryption you won't be able to backup /data.
If so use this SuperSU: https://mega.nz/#!18FW1QTQ!3DCA3KrIUSRqEu4L-expci4HcKtk6F25fE1u6ecJV9Q
Or magisk 13.3: https://mega.nz/#!I4FQzbyA!gBZelHmD3lGGwzGISUXkf7GQTUAq5i785d_qPHQOaVE
Click to expand...
Click to collapse
hi,
thx for your last reply!
I am still on root status. I needed to decrypt now, thus I selected format data.
After that, files and folders are named correctly and I am able to create a backup.
I flashed public ziip, the other one was corrupt, mayve because of failed download, however as I understand it is not the reason why it always goes back to encryption, isn't it?
But: Once I reboot to Android and go back to recovery it is encrypted again?
My current problem is: I need to move a TWRP backup to internal storage and run TWRP restore feature from recovery, but it is encrypted. Once I format data it is decrypted but internal storage empty again. So I reboot to Android (because mounting from within TWRP does not work )and put TWRP backup folder to internsal storage, but then I go back to recovery and see it is encrypted again :S like driving in a circle ...
And I cannot put backup folder to external micro sd as it is too large for my small micro sd I have.
Do I need to flash a decrypted bootimage? If yes, which one?
Can you help me on this maybe?
tobyffm said:
hi,
thx for your last reply!
I am still on root status. I needed to decrypt now, thus I selected format data.
After that, files and folders are named correctly and I am able to create a backup.
I flashed public ziip, the other one was corrupt, mayve because of failed download, however as I understand it is not the reason why it always goes back to encryption, isn't it?
But: Once I reboot to Android and go back to recovery it is encrypted again?
My current problem is: I need to move a TWRP backup to internal storage and run TWRP restore feature from recovery, but it is encrypted. Once I format data it is decrypted but internal storage empty again. So I reboot to Android (because mounting from within TWRP does not work )and put TWRP backup folder to internsal storage, but then I go back to recovery and see it is encrypted again :S like driving in a circle ...
And I cannot put backup folder to external micro sd as it is too large for my small micro sd I have.
Do I need to flash a decrypted bootimage? If yes, which one?
Can you help me on this maybe?
Click to expand...
Click to collapse
'Format Data', flash official Magisk 13.3 or SuperSU 2.82 SR1 (mine from mega doesn't remove encryption), flash public zip, flash HW zip. It should now stay decrypted. You might have to go back to TWRP start screen after Format, then select 'Reboot' - 'Reboot Recovery' if it doesn't want to mount /data after Format.
Rebooting to system after formatting but not flashing magisk or supersu will encrypt again.
I can make a decrypted boot image if it doesn't want to stay decrypted.
ante0 said:
'Format Data', flash official Magisk 13.3 or SuperSU 2.82 SR1 (mine from mega doesn't remove encryption), flash public zip, flash HW zip. It should now stay decrypted. You might have to go back to TWRP start screen after Format, then select 'Reboot' - 'Reboot Recovery' if it doesn't want to mount /data after Format.
Rebooting to system after formatting but not flashing magisk or supersu will encrypt again.
I can make a decrypted boot image if it doesn't want to stay decrypted.
Click to expand...
Click to collapse
ok thx.
I redownloaded HW zip and checked md5 sum with the file from first attempt, same md5. However this is what i did:
Format data, tried to flash Magisk, but did not work, there was an error, this is why I flashed SuperSU 2.82 SR1 which worked with no errors. I flashed public zip right away, after that I flashed HW zip, but again, it did not work there were errors. However, encryption seems to be gone anyway. and yes, it keeps being decrypted.
I managed to get TWRP seeing an old TWRP Backup, which I pushed onto internal storage. I started restore of /data/ of that TWRP backup because I want to get the WhatsApp incl. data from data backup.
I booted up to Android and now I am faced with the next fuc*in problem: lock pattern of Dec 16. I cant remember and after few attemps devices is locked for 10 minutes, then for another 30 minutes ...
After google research it should be able to use Android device manager from a browser and to lock device and set a new pin/password to unlock the device. It is communicating as I can let the phone ring with no problem, but all how_tos show me this screen in android device manager interface
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Of course it is me, who dont get this mask to set a new pin/password ( (
I only can enter an optional phone no and message from browser
Any idea what to do?
Update: I extracted whatsapp from backup with nandroid manager app but it did not restore my data correctly, best way would be to get done the pattern problem when restopring the twrp backup
redaring locking bootloader again:
I went to your link https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
they say to download file for own device here: http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=
I only find:
DUK-L09C432B182
But mine is MHA-L09C432B182, can I go forward with DUK-L09C432B182 anyway? Actually I dont understand what to do, their description is curios.
tobyffm said:
ok thx.
I redownloaded HW zip and checked md5 sum with the file from first attempt, same md5. However this is what i did:
Format data, tried to flash Magisk, but did not work, there was an error, this is why I flashed SuperSU 2.82 SR1 which worked with no errors. I flashed public zip right away, after that I flashed HW zip, but again, it did not work there were errors. However, encryption seems to be gone anyway. and yes, it keeps being decrypted.
I managed to get TWRP seeing an old TWRP Backup, which I pushed onto internal storage. I started restore of /data/ of that TWRP backup because I want to get the WhatsApp incl. data from data backup.
I booted up to Android and now I am faced with the next fuc*in problem: lock pattern of Dec 16. I cant remember and after few attemps devices is locked for 10 minutes, then for another 30 minutes ...
After google research it should be able to use Android device manager from a browser and to lock device and set a new pin/password to unlock the device. It is communicating as I can let the phone ring with no problem, but all how_tos show me this screen in android device manager interface
Of course it is me, who dont get this mask to set a new pin/password ( (
I only can enter an optional phone no and message from browser
Any idea what to do?
Update: I extracted whatsapp from backup with nandroid manager app but it did not restore my data correctly, best way would be to get done the pattern problem when restopring the twrp backup
redaring locking bootloader again:
I went to your link https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
they say to download file for own device here: http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=
I only find:
DUK-L09C432B182
But mine is MHA-L09C432B182, can I go forward with DUK-L09C432B182 anyway? Actually I dont understand what to do, their description is curios.
Click to expand...
Click to collapse
L09C432B156 firmware: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1366/g104/v84355/f1/full/update.zip
L09C432B182 public data zip:
http://update.hicloud.com:8180/TDS/...55/f1/full/public/update_data_full_public.zip
L09C432B182 hw data zip:
http://update.hicloud.com:8180/TDS/...04/v84355/f1/full/hw/eu/update_full_hw_eu.zip
You might as well update to B190 while you're at it..
L09C432B190: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1366/g104/v89786/f1/full/update.zip
L09C432B190 public data zip:
http://update.hicloud.com:8180/TDS/...86/f1/full/public/update_data_full_public.zip
L09C432B190 hw data zip: http://update.hicloud.com:8180/TDS/...l/MHA-L09_hw_eu/update_full_MHA-L09_hw_eu.zip
Rename public data zip to update_data_public.zip.
Rename hw data zip to update_all_hw.zip
ok, to summarize:
1) I download these 3 files:
full update.zip:
L09C432B190: http://update.hicloud.com:8180/TDS/d...ull/update.zip
L09C432B190 public data zip:
http://update.hiclod.com:8180/TDS/d...ull_public.zip
L09C432B190 hw data zip:
http://update.hicloud.com:8180/TDS/d...-L09_hw_eu.zip
2) I extract recovery img file from update zip
3) I uninstall root from within super su app.
4) I rename zip files and flash public zip as well as hw zip from within twrp recovery
5) i put extraced recovery img to device by using "fastboot flash recovery "
Will it work like this? Or do I need to flash public and hw first and after that uninstall root from supersu?
and then in the end "fastboot oem lock" ? to get the bootloader locked and to switch off the boot message "your device cant be trusted" ?
and: I couldnt flash hw zip before as it ended up with errrors, is this why I dont have Search for updates in EMUI 5.0 anymore?
tobyffm said:
ok, to summarize:
1) I download these 3 files:
full update.zip:
L09C432B190: http://update.hicloud.com:8180/TDS/d...ull/update.zip
L09C432B190 public data zip:
http://update.hiclod.com:8180/TDS/d...ull_public.zip
L09C432B190 hw data zip:
http://update.hicloud.com:8180/TDS/d...-L09_hw_eu.zip
2) I extract recovery img file from update zip
3) I uninstall root from within super su app.
4) I rename zip files and flash public zip as well as hw zip from within twrp recovery
5) i put extraced recovery img to device by using "fastboot flash recovery "
Will it work like this? Or do I need to flash public and hw first and after that uninstall root from supersu?
and then in the end "fastboot oem lock" ? to get the bootloader locked and to switch off the boot message "your device cant be trusted" ?
and: I couldnt flash hw zip before as it ended up with errrors, is this why I dont have Search for updates in EMUI 5.0 anymore?
Click to expand...
Click to collapse
No. Follow the guide you linked, that's where you use those files.
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
You could relock but it will say Bootloader Relocked instead of Bootloader Lock.
And if you don't plan on updating to B190 using the guide I suggest you download public and HW Data for B182 and flash those in twrp.
Can cause problems otherwise.
Flash public first. They will give errors because you're not supposed to flash them in twrp, they're official Huawei zips that are flashed using stock recovery.
ante0 said:
No. Follow the guide you linked, that's where you use those files.
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
You could relock but it will say Bootloader Relocked instead of Bootloader Lock.
And if you don't plan on updating to B190 using the guide I suggest you download public and HW Data for B182 and flash those in twrp.
Can cause problems otherwise.
Flash public first. They will give errors because you're not supposed to flash them in twrp, they're official Huawei zips that are flashed using stock recovery.
Click to expand...
Click to collapse
OK and why i currently dont see menue point "search for updates" in EMUI 5.0 ? Maybe i will stay rooted as I see that xposed has now been released.
But I want to receive official OTAs anyway, but currently the full menue point for searching for updates is gone. Any idea?
tobyffm said:
OK and why i currently dont see menue point "search for updates" in EMUI 5.0 ? Maybe i will stay rooted as I see that xposed has now been released.
But I want to receive official OTAs anyway, but currently the full menue point for searching for updates is gone. Any idea?
Click to expand...
Click to collapse
Did you flash back public and HW Data for B182?
ante0 said:
Did you flash back public and HW Data for B182?
Click to expand...
Click to collapse
I was not sure which was the last I flashed during last days, B182 or B190.
However, just redownload B182 files and flashed, first public, then hw zip.
Rebooted device, "search for updates" is available again, thank you very much
But it says B182 is latest update, so OTA not available for me so far yet. How can I manually flash to latest version B190 without loosing 'Search for Update' section?
tobyffm said:
I was not sure which was the last I flashed during last days, B182 or B190.
However, just redownload B182 files and flashed, first public, then hw zip.
Rebooted device, "search for updates" is available again, thank you very much
But it says B182 is latest update, so OTA not available for me so far yet. How can I manually flash to latest version B190 without loosing 'Search for Update' section?
Click to expand...
Click to collapse
You can with that guide i linked a couple of posts back. You can't flash update.zip in twrp, you have to use that guide to flash it. It's pretty straightforward. Download HWOTA BASE, HWOTA WINDOWS and HWOTA MHA (Mate 9), extract all to the same folder (C:\hwota is a good location). Download the files for B190 i linked a couple of posts back. Rename public data zip to update_data_public.zip.
Rename hw data zip to update_all_hw.zip, place them and update.zip in the update folder, run bat (if windows) or sh (Linux) then do what the prompts say. When it asks pick same brand update, then script update folder. It will transfer files for you. Bootloader will be locked when you're done.
ante0 said:
You can with that guide i linked a couple of posts back. You can't flash update.zip in twrp, you have to use that guide to flash it. It's pretty straightforward. Download HWOTA BASE, HWOTA WINDOWS and HWOTA MHA (Mate 9), extract all to the same folder (C:\hwota is a good location). Download the files for B190 i linked a couple of posts back. Rename public data zip to update_data_public.zip.
Rename hw data zip to update_all_hw.zip, place them and update.zip in the update folder, run bat (if windows) or sh (Linux) then do what the prompts say. When it asks pick same brand update, then script update folder. It will transfer files for you. Bootloader will be locked when you're done.
Click to expand...
Click to collapse
Did like described, when it comes to "update should install automatically" it reboots into erecovery, but Software install failed!
The update package does not exists please download the package again
But all 3 files are within the script folder and named correctly i think, pls see my attached screenshot
tobyffm said:
Did like described, when it comes to "update should install automatically" it reboots into erecovery, but Software install failed!
The update package does not exists please download the package again
But all 3 files are within the script folder and named correctly i think, pls see my attached screenshot
Click to expand...
Click to collapse
Are they in the update folder? I think I see the update.bat file there.
Put them in the update folder (for example c:\hwota\update\)
ante0 said:
Are they in the update folder? I think I see the update.bat file there.
Put them in the update folder (for example c:\hwota\update\)
Click to expand...
Click to collapse
yes, that was my fault.
Put to update folder and run again, update was running and finished with 100%. phone rebooted loaded very long. Now android is broken. I see my background image, but cannot do anything it is like hanging hanging hanging, everyhting very slow, like it is loading much of information. rebooted phone and waited some more time. seems now it is working and I am on B190. Now, i have to unlock bootloader again and install supersu again =)
thx for your help so far.
btw: u dont have any solution for my previous posted problem with my twrp backup, dont you? restoring twrp backup ends up in lock screen with pattern which I cant remember. Android Device Manager from PC browser can communictae with the phone but it does not offer me to set a new pin. Do you have any other method in mind how I can go on?
move fstab using official recovery ( adbpull /vendor/etc/fstab.kirin970 and fstab.kirin970.data - remove "avb" and encryption from userdata, replace the encryption line on data with 'encryptable')
format /data in unofficial recovery
install magisk in official recovery
for some reason it only works in that order, if you try and do it all in official or unofficial recovery it doesnt work and magisk recognizes encryption on data.
after each step reboot bootloader and flash respective recovery, then fastboot reboot unplug and hold power and vol up to go straight into recovery and continue, if you boot you have to start over)
when installing magisk zip you should see that it doesnt say keep force encrypt.
and if you go in settings you have the option to encrypt.
virtyx said:
move fstab using official recovery ( adbpull /vendor/etc/fstab.kirin970 and fstab.kirin970.data - remove "avb" and encryption from userdata, replace the encryption line on data with 'encryptable')
format /data in unofficial recovery
install magisk in official recovery
for some reason it only works in that order, if you try and do it all in official or unofficial recovery it doesnt work and magisk recognizes encryption on data.
after each step reboot bootloader and flash respective recovery, then fastboot reboot unplug and hold power and vol up to go straight into recovery and continue, if you boot you have to start over)
when installing magisk zip you should see that it doesnt say keep force encrypt.
and if you go in settings you have the option to encrypt.
Click to expand...
Click to collapse
Hi there
I´m struggling to get lineage 15.1 to install without google framework errors
You mention offical and unofficial recovery. I guess you are talking about twrp
when you say move fstab do you mean remove?
Could this encryption be my problem with lineage and gapps not installing as it should?
buenso80 said:
Hi there
I´m struggling to get lineage 15.1 to install without google framework errors
You mention offical and unofficial recovery. I guess you are talking about twrp
when you say move fstab do you mean remove?
Could this encryption be my problem with lineage and gapps not installing as it should?
Click to expand...
Click to collapse
After you install lineage format /data that should work
Totally irrelevant to OP
If i hadn't tried that i wouldn't ask here.
Not TOTALLY irrelevant, as my question is about the official and unofficial twrp having trouble mounting and wiping before flashing rom..
Please stop trolling
virtyx said:
move fstab using official recovery ( adbpull /vendor/etc/fstab.kirin970 and fstab.kirin970.data - remove "avb" and encryption from userdata, replace the encryption line on data with 'encryptable')
format /data in unofficial recovery
install magisk in official recovery
for some reason it only works in that order, if you try and do it all in official or unofficial recovery it doesnt work and magisk recognizes encryption on data.
after each step reboot bootloader and flash respective recovery, then fastboot reboot unplug and hold power and vol up to go straight into recovery and continue, if you boot you have to start over)
when installing magisk zip you should see that it doesnt say keep force encrypt.
and if you go in settings you have the option to encrypt.
Click to expand...
Click to collapse
If you format data, isn't the device going to be empty?
Only time I've done this before I had to copy a ROM via MTP in recovery and then flash with no Verity.
So forgive me if I'm wrong but if I format data, won't I end up with no operating system?
dladz said:
If you format data, isn't the device going to be empty? J
Only time I've done this before I had to copy a ROM via MTP in recovery and then flash with no Verity.
So forgive me if I'm wrong but if I format data, won't I end up with no operating system?
Click to expand...
Click to collapse
/system is where the system lives
/data is userdata and applications
Noting wrong with formatting, you will lose all apps and data though
virtyx said:
/system is where the system lives
/data is userdata and applications
Noting wrong with formatting, you will lose all apps and data though
Click to expand...
Click to collapse
Legend, thanks for clearing that up.
:good:
I know off topic, but out of interest with the p20 pro, if you did find yourself with no OS how would you get back to a functional phone?
There's no custom ROMs to flash, just never been in this situation before.
Hypothetically
dladz said:
Legend, thanks for clearing that up.
:good:
I know off topic, but out of interest with the p20 pro, if you did find yourself with no OS how would you get back to a functional phone?
There's no custom ROMs to flash, just never been in this situation before.
Hypothetically
Click to expand...
Click to collapse
You can use hurupdater and download the firmware from firmwarefinder on your of
Happened a lot of times for me
Just as a headsup, you dont need to decrypt anything when you just wanna do some changes once and are proper admin level on your desktop machine, ive moved a whatsapp message history from previous phone (also taken from protected space there) to P20P just by attaching it to pc in file transfer mode and then adding myself as full control user in the security tabs of the several system folder properties i went in to, worked like a charm.
The point im trying to make: Android and Windows finally understand each others permission systems (not sure since how long as ive been away from android for a few years) so you can just attach it and use Windows perm system to give yourself access where needed, lots easier & faster then making a bunch of changes to your phone in effect disabling encryption, something you in most cases dont really want to do permanently anyway, so this is a nice workaround that doesn't touch your phone's encryption settings but still lets you mess about with system files.
Just my 2 cents.
virtyx said:
move fstab using official recovery ( adbpull /vendor/etc/fstab.kirin970 and fstab.kirin970.data - remove "avb" and encryption from userdata, replace the encryption line on data with 'encryptable')
format /data in unofficial recovery
install magisk in official recovery
for some reason it only works in that order, if you try and do it all in official or unofficial recovery it doesnt work and magisk recognizes encryption on data.
after each step reboot bootloader and flash respective recovery, then fastboot reboot unplug and hold power and vol up to go straight into recovery and continue, if you boot you have to start over)
when installing magisk zip you should see that it doesnt say keep force encrypt.
and if you go in settings you have the option to encrypt.
Click to expand...
Click to collapse
I did everything step by step, the encryption is gone and yet I still get that stupid permission denied error when I try to do a backup in TWRP. So. F*cking. Annoying.
Update: when I press the "Install" button in TWRP, it shows giberish, but if I go to Advanced>File Manager everything has it's proper name. WTF?!
Hmmm, If I don't tick "Vendor" in the backup, I get this error:
Can not create 'data/media/0/2021-01-20--07-26-51' folder (No such file or directory).
Failed to make backup folder.
Update on update: oof, now everything that's in the internal storage is gibberish, even in the OS.
Recently I just downgraded my Mi Mix 2s to MIUI V9.6.4.0.ODGMIFD via Miflash and planning to stay on this (global) rom. However, after flashing the latest twrp from the official link (v3.1.1-1) it did not ask for the lockscreen password upon entering the interface and my files just showed up with random filenames.
After some reading, I suppose my device is encrypted and twrp did not let me to decrypt it (without asking for lockscreen password). The random filenames still happens even I remove the lockscreen password before flashing twrp meaning the device is still encrypted. Before I could do anything else (flashing zip files, making backups, etc) I must format data to remove the encryption, but twrp will disappear after I booted into system and did the initial phone configuration. Tried different versions (from 3.2.3-0 to 3.3.1-1) but to no avail. The only way I can retain twrp after booting into system is to flash Magisk zip right after formatting data, but if I enter twrp again the filenames are still in random characters as before and I couldn't do anything in it.
So my question is how can I properly install twrp into my device without having the encryption issues? Could it be the rom that caused the problem or did I missed out any steps that fails to disable the encryption? Thanks for your attention.
WannaFly3721 said:
Recently I just downgraded my Mi Mix 2s to MIUI V9.6.4.0.ODGMIFD via Miflash and planning to stay on this (global) rom. However, after flashing the latest twrp from the official link (v3.1.1-1) it did not ask for the lockscreen password upon entering the interface and my files just showed up with random filenames.
After some reading, I suppose my device is encrypted and twrp did not let me to decrypt it (without asking for lockscreen password). The random filenames still happens even I remove the lockscreen password before flashing twrp meaning the device is still encrypted. Before I could do anything else (flashing zip files, making backups, etc) I must format data to remove the encryption, but twrp will disappear after I booted into system and did the initial phone configuration. Tried different versions (from 3.2.3-0 to 3.3.1-1) but to no avail. The only way I can retain twrp after booting into system is to flash Magisk zip right after formatting data, but if I enter twrp again the filenames are still in random characters as before and I couldn't do anything in it.
So my question is how can I properly install twrp into my device without having the encryption issues? Could it be the rom that caused the problem or did I missed out any steps that fails to disable the encryption? Thanks for your attention.
Click to expand...
Click to collapse
Guess I've found a workaround for this by installing the OrangeFox recovery project (ofrp). For those who stuck at the same issue as mine this is what I did:
1. Flash twrp img through adb fastboot.
2. Format data to remove encryption.
3. Paste ofrp zip file into the device and flash it via twrp, which boots the phone into ofrp interface.
4. Paste the recovery zip file into the device and flash it via ofrp. Under setting - MIUI OTA it should show 'enabled' (for android 9 and above might need to uncheck disable dm-verity first according to ofrp page, but my rom is at android 8 so I left it checked as default before flashing).
5. Reboot to system and complete the initial configuration.
6. Reboot to recovery again and ofrp should remain installed. From there I was then able to perform a backup.
Btw, under phone settings it says my device is still encrypted although I can access to ofrp without having the encryption issue as in twrp (random filenames, cannot transfer files or create backups, etc). Anyhow I now have a working custom recovery on the stock rom, cheers.
I would like to install TWRP and after that Lineage OS on my Samsung S8+ (Exynos). So i tried flashing TWRP with Odin (Dream2lte version 3.3.1.0). But i ran into a FRP lock so i googled and try to solve this, but so far i am unable to.
I have the password to my Google account, so i removed the Google account from the phone and removed the phone from my Google account. After factory reset i am still getting an error FRP lock when flashing.
Shouldn't the FRP lock be gone after removing google account and doing a factory reset? I have tried a couple of YT Howto's but they don't seem to work.
How do i remove the FRP lock so that i am able to install TWRP and Lineage OS?
Like i said i know the password to my Google account and i 100% own the phone
(Bypass probably isn't the correct word, i am simply trying to turn it off )
Got exactly the same problem, hence like you, ended up here for help.
Well i fixed my problem (Disable USB debug and OEM unlock, couple of reboots and enabled them and it worked). But after that i broke my phone
I am stuck at the screen saying: An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software.
I know this is meant to scare me (is kinda working...), but i also know that Odin is still working. So as far as i know i have to flash the original firmware now to fix this. But i keep getting the error: Invalid magic string. When i try to also flash a BL file i get the error: ""Secure CHECK FAIL: (BOOTLOADER)" The option Re-Partition in Odin is switched OFF, as far as i know this is okee... right?
I have tried 3 different versions (Android 9/8/7):
https://www.sammobile.com/samsung/galaxy-s8/firmware/SM-G950F/TNL/download/G950FXXU1AQC9/128974/
https://www.sammobile.com/samsung/galaxy-s8/firmware/SM-G950F/TNL/download/G950FXXU4DSBA/259612/
https://www.sammobile.com/samsung/galaxy-s8/firmware/SM-G950F/TNL/download/G950FXXS4CSA4/256485/
This zip files contain a BL/AP/CP/CSC file, i have tried them all at the same time in Odin as well as the AP and BL files seperate. (from one zip file, NOT different version files together of course)
I tried using Smart Switch 4.1 to do the emergency procedure using model nummer SM-G955F with my serial number but before it does anything it tells me this is not possible with an SM-G955F.
They all give me the same result.
Does anybody know how to fix this?
TheGeneral said:
Well i fixed my problem (Disable USB debug and OEM unlock, couple of reboots and enabled them and it worked). But after that i broke my phone
I am stuck at the screen saying: An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software.
I know this is meant to scare me (is kinda working...), but i also know that Odin is still working. So as far as i know i have to flash the original firmware now to fix this. But i keep getting the error: Invalid magic string. When i try to also flash a BL file i get the error: ""Secure CHECK FAIL: (BOOTLOADER)" The option Re-Partition in Odin is switched OFF, as far as i know this is okee... right?
I have tried 3 different versions (Android 9/8/7):
https://www.sammobile.com/samsung/galaxy-s8/firmware/SM-G950F/TNL/download/G950FXXU1AQC9/128974/
https://www.sammobile.com/samsung/galaxy-s8/firmware/SM-G950F/TNL/download/G950FXXU4DSBA/259612/
https://www.sammobile.com/samsung/galaxy-s8/firmware/SM-G950F/TNL/download/G950FXXS4CSA4/256485/
This zip files contain a BL/AP/CP/CSC file, i have tried them all at the same time in Odin as well as the AP and BL files seperate. (from one zip file, NOT different version files together of course)
I tried using Smart Switch 4.1 to do the emergency procedure using model nummer SM-G955F with my serial number but before it does anything it tells me this is not possible with an SM-G955F.
They all give me the same result.
Does anybody know how to fix this?
Click to expand...
Click to collapse
Secure check fail on bootloader is your flashing a older firmware than on the device. Look at the builds 5th from last digit. You need to flash that equal or greater than.
The error screen you see for emergency recovery is ok. It's like a modified version of download mode. Kind of. You can still flash Odin files from said screen. Ii see you've flashed a bit 1. And two bit 4 firmwares. So you must be on a 5 or greater. I don't know the exy bit number but like snapdragon is at or near 7 or 8. I can explain better if you need. But not an exynos expert
TheMadScientist said:
Secure check fail on bootloader is your flashing a older firmware than on the device. Look at the builds 5th from last digit. You need to flash that equal or greater than.
The error screen you see for emergency recovery is ok. It's like a modified version of download mode. Kind of. You can still flash Odin files from said screen. Ii see you've flashed a bit 1. And two bit 4 firmwares. So you must be on a 5 or greater. I don't know the exy bit number but like snapdragon is at or near 7 or 8. I can explain better if you need. But not an exynos expert
Click to expand...
Click to collapse
Thanks for your reply! I am in the normal "Downloading...." screen is there anywhere i can check which number i am at?
But i have just tried this one: G950FXXS7DTA6_G950FOXM7DTA6_PHN and it is not working. But this is the newest one available on sammobile. Still the same bootloader error.
I have tried TWRP 3.3.1.0 and that worked, now i am in the TWRP menu but i don't have the LineageOS 17 + GoApps copied to the root. So i cannot install LineageOS now. What do i do now? My computer sees a SM-G955F but it is not showing any storage, if i can fix this i could copy the LineageOS files to the root...right?
TheGeneral said:
Thanks for your reply! I am in the normal "Downloading...." screen is there anywhere i can check which number i am at?
But i have just tried this one: G950FXXS7DTA6_G950FOXM7DTA6_PHN and it is not working. But this is the newest one available on sammobile. Still the same bootloader error.
I have tried TWRP 3.3.1.0 and that worked, now i am in the TWRP menu but i don't have the LineageOS 17 + GoApps copied to the root. So i cannot install LineageOS now. What do i do now? My computer sees a SM-G955F but it is not showing any storage, if i can fix this i could copy the LineageOS files to the root...right?
Click to expand...
Click to collapse
1. If you are on an S8+ flashing firmware for the S8 will cause you issues. Download firmware for the S8+ only. ie: 955f not 950f.
2. If you can't get into the system but can get into download mode there should be a line saying
AP SWREV: B:? K:? S:?
The B:? Is your bootloader version number. You will need to flash the same or higher.
3. How did you install TWRP?
If you don't have an SD card to store files on then after the Format Data stage you can then copy files from pc to phones internal storage.
spawnlives said:
1. If you are on an S8+ flashing firmware for the S8 will cause you issues. Download firmware for the S8+ only. ie: 955f not 950f.
2. If you can't get into the system but can get into download mode there should be a line saying
AP SWREV: B:? K:? S:?
The B:? Is your bootloader version number. You will need to flash the same or higher.
3. How did you install TWTP?
If you don't have an SD card to store files on then after the Format Data stage you can then copy files from pc to phones internal storage.
Click to expand...
Click to collapse
I am a bit embarrassed, it looks like i have been trying to flash the wrong ROMs last night 950 instead of 955, i am downloading the correct files now and wil try again. Sorry for this dumb mistake!
Just to be sure, i am trying to do this:
https://www.getdroidtips.com/lineage-os-17-samsung-galaxy-s8/
(I do know that this site says S8, but i picked the right files this time and thought the process would be the same)
But i first Flash TWRP with Odin, otherwise i cannot reach the TWRP recovery menu right?
But when i look bullet 5 (not number 5) it looks like i need to flash TWRP from within the TWRP menu. But that is not correct right?
I have placed these zip files on the phone:
lineage-17.1-20200211-UNOFFICIAL-dreamlte.zip
open_gapps-arm64-10.0-pico-20200303.zip
As a zip and unpacked, but when i am in the TWRP menu and i go to install, i cannot find the zip files. I placed them in the highest folder level possible. Why can't i find them now?
TheGeneral said:
I am a bit embarrassed, it looks like i have been trying to flash the wrong ROMs last night 950 instead of 955, i am downloading the correct files now and wil try again. Sorry for this dumb mistake!
Just to be sure, i am trying to do this:
https://www.getdroidtips.com/lineage-os-17-samsung-galaxy-s8/
(I do know that this site says S8, but i picked the right files this time and thought the process would be the same)
But i first Flash TWRP with Odin, otherwise i cannot reach the TWRP recovery menu right?
But when i look bullet 5 (not number 5) it looks like i need to flash TWRP from within the TWRP menu. But that is not correct right?
I have placed these zip files on the phone:
lineage-17.1-20200211-UNOFFICIAL-dreamlte.zip
open_gapps-arm64-10.0-pico-20200303.zip
As a zip and unpacked, but when i am in the TWRP menu and i go to install, i cannot find the zip files. I placed them in the highest folder level possible. Why can't i find them now?
Click to expand...
Click to collapse
I don't use custom roms yet.
Try searching for you device S8+ for installation instructions. Had a quick look the firmware is for S8 only not S8+. Need dream2lit for S8+
Try in separate stages instead of all at once.
I would sort out your stock firmware first get it up and running.
Then install TWRP. Install for S8+ from
http://twrp.me/Devices/Samsung/
They are many guides for this
https://forum.xda-developers.com/ga...pment/recovery-twrp-galaxy-s8-exynos-t3595102
If you need rmm bypass zip
https://forum.xda-developers.com/sa...w-to/guide-root-install-twrp-samsung-t3747535
Get that up and running properly.
Then you can install custom roms,root etc.
In regards to transferring files to phone they need to be a zip file ( .zip ) or an image ( .img ) files to flash in TWRP.
Maybe select internal storage then from menu select sdcard folder check if file is there.
spawnlives said:
I don't use custom roms yet.
Try searching for you device S8+ for installation instructions. Had a quick look the firmware is for S8 only not S8+. Need dream2lit for S8+
Try in separate stages instead of all at once.
I would sort out your stock firmware first get it up and running.
Then install TWRP. Install for S8+ from
http://twrp.me/Devices/Samsung/
They are many guides for this
https://forum.xda-developers.com/ga...pment/recovery-twrp-galaxy-s8-exynos-t3595102
If you need rmm bypass zip
https://forum.xda-developers.com/sa...w-to/guide-root-install-twrp-samsung-t3747535
Get that up and running properly.
Then you can install custom roms,root etc.
In regards to transferring files to phone they need to be a zip file ( .zip ) or an image ( .img ) files to flash in TWRP.
Maybe select internal storage then from menu select sdcard folder check if file is there.
Click to expand...
Click to collapse
I am using dream2lit.
I have the correct factory stock ROM (now), so i can always go back now. But i agree, my preparation wasn't good enough.
I will look at the links, but for now like i said my problem is that i cannot see my files in TWRP. But maybe that will be addressed in one of your links
With regards to your first link, i used the "Odin Method" so as far as i can tell i did this the right way(https://twrp.me/samsung/samsunggalaxys8plus.html):
Odin Install Method (No Root Required):
You will need to download and install Odin on your PC. Once you have Odin installed, download the proper .tar file for your device from the download link above. Power off your device. Turn on your device using the proper key combo to get into download mode and attach the device to your computer via a USB cable. Use the PDA tab or button to browse to and select the tar file that you downloaded and flash the device.
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
TheGeneral said:
I am using dream2lit.
I have the correct factory stock ROM (now), so i can always go back now. But i agree, my preparation wasn't good enough.
I will look at the links, but for now like i said my problem is that i cannot see my files in TWRP. But maybe that will be addressed in one of your links
With regards to your first link, i used the "Odin Method" so as far as i can tell i did this the right way(https://twrp.me/samsung/samsunggalaxys8plus.html):
Odin Install Method (No Root Required):
You will need to download and install Odin on your PC. Once you have Odin installed, download the proper .tar file for your device from the download link above. Power off your device. Turn on your device using the proper key combo to get into download mode and attach the device to your computer via a USB cable. Use the PDA tab or button to browse to and select the tar file that you downloaded and flash the device.
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
Click to expand...
Click to collapse
Note: Samsung don't have fastboot commands. Have to use button configurations to enter recovery or download modes.
What stage are you at?
It will give me a better idea to be able to help more.
spawnlives said:
Note: Samsung don't have fastboot commands. Have to use button configurations to enter recovery or download modes.
What stage are you at?
It will give me a better idea to be able to help more.
Click to expand...
Click to collapse
Well i installed Lineage OS 17.1 and Open Apps (lineage-17.1-20200211-UNOFFICIAL-dream2lte and open_gapps-arm64-10.0-pico-20200303) with an OTG plug and an USB stick. After installing i removed the USB Stick. But now i am having a new problem...
When the phone boots it asks: "To start Android, enter your password"
Which password is this? When i enter a password i often use it works but then:
"Decryption unsuccessful
The password you entered is correct, but unfortunately your data is corrupt. (Which is no problem)
To resume using your phone, you need to perform a factory reset. When you set up your phone after the reset, you'll have an opportunity to restore any data that was backed up to your Google account.
(Button) Erase ALL DATA"
Of course i erase the data. Look at the attachment to see what happens then.
I will not give up, will get Lineage OS on this phone, and after that on my Tablet S2 and maybe even on my primairy phone (S10+)
What should i do now? Many thanks for all the help so far, and for help finishing this proces
TheGeneral said:
Well i installed Lineage OS 17.1 and Open Apps (lineage-17.1-20200211-UNOFFICIAL-dream2lte and open_gapps-arm64-10.0-pico-20200303) with an OTG plug and an USB stick. After installing i removed the USB Stick. But now i am having a new problem...
When the phone boots it asks: "To start Android, enter your password"
Which password is this? When i enter a password i often use it works but then:
"Decryption unsuccessful
The password you entered is correct, but unfortunately your data is corrupt. (Which is no problem)
To resume using your phone, you need to perform a factory reset. When you set up your phone after the reset, you'll have an opportunity to restore any data that was backed up to your Google account.
(Button) Erase ALL DATA"
Of course i erase the data. Look at the attachment to see what happens then.
I will not give up, will get Lineage OS on this phone, and after that on my Tablet S2 and maybe even on my primairy phone (S10+)
What should i do now? Many thanks for all the help so far, and for help finishing this proces
Click to expand...
Click to collapse
Mounting data errors in twrp generally ( but not always ) means your device is encrypted/re-encrypted when booting into system. Twrp has issues with encrypted devices.
What version twrp are you using?
Have you flashed the no-verity-opt-encypt zip in twrp. This zip file will prevent device from re-encrypting when booting phone back into the system ( after the Format Data stage / reboot back into twrp)
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
What is your process of installing twrp?
If you have any passwords etc. installed delete them until after setting up you phone.
spawnlives said:
Mounting data errors in twrp generally ( but not always ) means your device is encrypted/re-encrypted when booting into system. Twrp has issues with encrypted devices.
What version twrp are you using?
Have you flashed the no-verity-opt-encypt zip in twrp. This zip file will prevent device from re-encrypting when booting phone back into the system ( after the Format Data stage / reboot back into twrp)
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
What is your process of installing twrp?
If you have any passwords etc. installed delete them until after setting up you phone.
Click to expand...
Click to collapse
I am using version twrp-3.3.1-1-dream2lte and no i have not flashed that no-verity-opt-encypt zip. I assume i should flash this one the same way flash the Lineage ROM right?
No passwords used on the phone.
My process:
i put the phone in download mode (POWER+BIXBY+VOL DOWN)
I use ODIN to flash twrp-3.3.1-1-dream2lte, and when the phone reboot i press POWER+BIXBY+VOL UP to enter TWRP menu,
Then i go to WIPE and Advanced Wipe and i select the data, system and davlik cache. Then swipe to wipe it.
Then i go to INSTALL and flash lineage-17.1-20200211-UNOFFICIAL-dream2lte and open_gapps-arm64-10.0-pico-20200303
TheGeneral said:
I am using version twrp-3.3.1-1-dream2lte and no i have not flashed that no-verity-opt-encypt zip. I assume i should flash this one the same way flash the Lineage ROM right?
No passwords used on the phone.
My process:
i put the phone in download mode (POWER+BIXBY+VOL DOWN)
I use ODIN to flash twrp-3.3.1-1-dream2lte, and when the phone reboot i press POWER+BIXBY+VOL UP to enter TWRP menu,
Then i go to WIPE and Advanced Wipe and i select the data, system and davlik cache. Then swipe to wipe it.
Then i go to INSTALL and flash lineage-17.1-20200211-UNOFFICIAL-dream2lte and open_gapps-arm64-10.0-pico-20200303
Click to expand...
Click to collapse
To install TWRP
1. Flash twrp with odin - reboot straight into twrp
2. In wipe menu select Format Data ( bottom right )
Type yes to format
3. Reboot back into twrp ( use twrp menu )
4. Flash no-verity-opt zip and if needed rmm bypass zip ( using install button in twrp ).
5. Reboot back into twrp then reboot to system using twrp menu.
6. From system reboot back into twrp.
To check if device is un-encrypted use backup menu - check data storage size ( If reading 0mb then device is still encrypted ).
Note: If all ok I would do a complete twrp backup at this stage ( keep backup on a separate storage device ).
Then you can install custom Rom's as per the installation guide of that Rom.
spawnlives said:
To install TWRP
1. Flash twrp with odin - reboot straight into twrp
2. In wipe menu select Format Data ( bottom right )
Type yes to format
3. Reboot back into twrp ( use twrp menu )
4. Flash no-verity-opt zip and if needed rmm bypass zip ( using install button in twrp ).
5. Reboot back into twrp then reboot to system using twrp menu.
6. From system reboot back into twrp.
To check if device is un-encrypted use backup menu - check data storage size ( If reading 0mb then device is still encrypted ).
Note: If all ok I would do a complete twrp backup at this stage ( keep backup on a separate storage device ).
Then you can install custom Rom's as per the installation guide of that Rom.
Click to expand...
Click to collapse
how do i make a complete TWRP backup? and what is rmm bypass and how do i know if it is neccessary to install this zip file?
TheGeneral said:
how do i make a complete TWRP backup? and what is rmm bypass and how do i know if it is neccessary to install this zip file?
Click to expand...
Click to collapse
In twrp main menu
Select backup menu - select ( all ) partitions - select storage location ( bottom left of screen ) - then swipe to backup.
Note:
1. If backing up to internal storage copy/move backup to an external storage ie: PC, sd card.etc.
2. Since you want a custom rom backup of the EFS partition is important.
Rmm state can be found in download mode. It will have a line ( near the top ) saying RMM state. It will either say prenormal or normal /disappeared.
It won't hurt to flash it just in case.
See OP in the thread I sent before:
https://forum.xda-developers.com/sa...w-to/guide-root-install-twrp-samsung-t3747535
spawnlives said:
To install TWRP
1. Flash twrp with odin - reboot straight into twrp
2. In wipe menu select Format Data ( bottom right )
Type yes to format
3. Reboot back into twrp ( use twrp menu )
4. Flash no-verity-opt zip and if needed rmm bypass zip ( using install button in twrp ).
5. Reboot back into twrp then reboot to system using twrp menu.
6. From system reboot back into twrp.
To check if device is un-encrypted use backup menu - check data storage size ( If reading 0mb then device is still encrypted ).
Note: If all ok I would do a complete twrp backup at this stage ( keep backup on a separate storage device ).
Then you can install custom Rom's as per the installation guide of that Rom.
Click to expand...
Click to collapse
I am really trying to do what you are saying...but when i try to "Format Data" (Step 2) it shows an error "Failed to mount '/preload' (Invalid argument). When i try to install no-verity-opt zip (step 4) at the end it shows the same error "Failed to mount '/preload' (Invalid argument). Which is probably because format data failed?
I am installing the zip from an USB stick with an USB-C to USB-A Converter. I don't think that could be the problem?
As Expected the "Data (excl. storage) is still showing 0MB.
TheGeneral said:
I am really trying to do what you are saying...but when i try to "Format Data" (Step 2) it shows an error "Failed to mount '/preload' (Invalid argument). When i try to install no-verity-opt zip (step 4) at the end it shows the same error "Failed to mount '/preload' (Invalid argument). Which is probably because format data failed?
I am installing the zip from an USB stick with an USB-C to USB-A Converter. I don't think that could be the problem?
As Expected the "Data (excl. storage) is still showing 0MB.
Click to expand...
Click to collapse
Failed to mount preload seems to affect some users.
You could try after the format data and reboot back into twrp ( using twrp 3.3.1.1 ):
Select wipe menu
Select advanced wipe
Select Preload
Swipe to wipe
Reboot back into twrp
Then try flashing no-verity/rmm zips files - reboot back into twrp.
Normally, for me , after this stage If i still get 0mb I will reboot into the Android system and then back into twrp. Then check in backup menu storage. If ok then try to flash custom rom.
spawnlives said:
Failed to mount preload seems to affect some users.
You could try after the format data and reboot back into twrp ( using twrp 3.3.1.1 ):
Select wipe menu
Select advanced wipe
Select Preload
Swipe to wipe
Reboot back into twrp
Then try flashing no-verity/rmm zips files - reboot back into twrp.
Normally, for me , after this stage If i still get 0mb I will reboot into the Android system and then back into twrp. Then check in backup menu storage. If ok then try to flash custom rom.
Click to expand...
Click to collapse
Yes Yes!! After doing the Preload i am able to flash no-verity/rmm zips file.
But Data is still showing 0MB.....
I thought why not give the lineage OS rom flashing another try. That worked, but now the phone seems to hang on a Lineage OS logo with a small circle moving around not straight line.
So i wiped everything again and flashed no-verity/rmm zip file, and will wait what for some advice and what do to next.
TheGeneral said:
Yes Yes!! After doing the Preload i am able to flash no-verity/rmm zips file.
But Data is still showing 0MB.....
I thought why not give the lineage OS rom flashing another try. That worked, but now the phone seems to hang on a Lineage OS logo with a small circle moving around not straight line.
So i wiped everything again and flashed no-verity/rmm zip file, and will wait what for some advice and what do to next.
Click to expand...
Click to collapse
Have you tried to reboot into system through twrp ie: reboot menu - system. Let it start normally, reboot into twrp, then check storage size. ( This is after the flashing of the no-verity/rmm zip and rebooting back into twrp ).
As I said I' m not familiar with custom ROMs. I do know that some custom ROMs do take some time to boot up on installation.
But out of curiosity I have a spare S8 and will give it a go.
I should have expected this but after updating to MIUI 12.5.2, Magisk/root is no longer installed and the Magisk App only offers the option to "Select and Patch a File" , which I understand requires a full wipe and I don't want to do that.
Orangefox is also corrupted. I can still boot to it but it doesn't prompt me for my encryption code, so it can't access the data partition. Maybe I can just reflash that but can I flash Magisk from there after that to restore root without having to wipe the phone?
So it appears that the problem is MIUI 12.5 (or any MIUI ROMS based on Android 11), prevent decryption working in recovery mode. https://wiki.orangefox.tech/en/guides/encryption
I tried flashing TWRP and that doesn't decrypt the storage and just shows gibberish filenames too.
So, if we can't decrypt in recovery mode, we can't make backups and we can't install Magisk to restore root to make backups with apps like Titanium, what are we supposed to do?