Related
Hi,
I recently installed the latest firmware 23.0.1.A.5.77 using Flashtool. Now, when I want to boot my D6603 into either fastboot or recovery it doesn't work and the phone just boots and works normally. I have tried both using the volume up/down button and through adb using:
adb reboot fastboot
and
adb reboot recovery
adb seems to work fine: it recognizes the device, but the boot commands don't work
I don't get the LED indicator and the short vibrating of the phone, it just shows the 'Sony Xperia' screen, then 'Powered by Android' and then it boots. The bootloader is unlocked, can anyone help me with this so I can get root back? Many thanks
EDIT: Never mind, I am an idiot . Apparently I uninstalled my device drivers from Windows so I had to re-install fastboot drivers from Sony. I flashed the kernel I wanted and all is well.
I've not rooted my device or used the ADB method but have the same issues trying to boot into recovery mode using power/volume.
I have done a factory reset in the past using buttons and it got rid of some bloatware (what's new in the home/Google Now swipe) but I can no longer boot to do a hard reset. My device was recently repaired by Sony (cracked back) and since its come back I've been unable to boot into recovery.
I believe the Z3 doesn't have a recovery by default. If you want one, you'll have to flash it yourself. This requires an unlocked bootloader.
Knakharses said:
I believe the Z3 doesn't have a recovery by default. If you want one, you'll have to flash it yourself. This requires an unlocked bootloader.
Click to expand...
Click to collapse
There are no phones without recovery. How should they install OTA updates?!
TheXorg said:
There are no phones without recovery. How should they install OTA updates?!
Click to expand...
Click to collapse
Xperia phones do not have a recovery partition that is accessible to the user. It can only be entered when an official OTA is triggered and not by any key combinations or adb commands
gregbradley said:
Xperia phones do not have a recovery partition that is accessible to the user. It can only be entered when an official OTA is triggered and not by any key combinations or adb commands
Click to expand...
Click to collapse
Yeah, there's no real recovery partition but they DO have a FOTA partition that can be used to install a recovery as described here: http://forum.xda-developers.com/z3/development/recovery-z3-twrp-2-8-4-0-t3028846
TheXorg said:
Yeah, there's no real recovery partition but they DO have a FOTA partition that can be used to install a recovery as described here: http://forum.xda-developers.com/z3/development/recovery-z3-twrp-2-8-4-0-t3028846
Click to expand...
Click to collapse
Yes, but that installs a custom recovery which you can only do once you have root.
The FOTA partition is not accessible without root.
You can also install a custom recovery to the system partition once you have root, that is the main way it has been done on locked bootloader xperia phones since the X10 back in 2011...
But the fact remains there is no accessible stock recovery on xperia phones (with one exception, the Z3v has a very limited carrier recovery which allows users to clear cache, that's it)
I wasn't able to enter into recovery but to access flashboot mode just plug in the usb cable/charger into the phone and PC. Power off the phone, don't restarted it. power it on and hold the power + vol down key and you will see a message on the screen. while in this mode use the flashtool to flash any OTA firmwares.
So I had an unlocked H8 with LOS. As I wanted to install EMUI, I put the proper restore Update.app into the dload folder and started Huawei's recovery. Everything went well, I formated data and wanted to install the EMUI 4.1 ROM using the same method.
Unfortunately my H8 is bootlooping and there is now way into erecovery nor any other recovery. It simply reboots on every single known vol up or down key pressing combination. The only thing I can go to is fastboot mode when holding down vol down and plugging in usb wire. But, it says frd locked and I can't install nor boot twrp. It's simply gone and reboots all the time.
Any hints? I can't even turn it off.
I wanted to give away that phone that's the reason. Last time I did it this way, I could flash the EMUI 4.1 since it's signed. But not this time.
Interesting part is, that although fastboot says frd locked, I still get the "phone unlocked" warning on every reboot. dload method isn't working, as it simply keeps rebooting.
It's my hardest brick so far I ever encountered
the same thing happened to me.....on my phone lock/unlocked frp and bootloader were tweaked for some reason(I mean that what was written wasn't the reality) so how did I fix it? I kept on to flash rollback package many times and I tried to unlock/relock bootloader again, at the end the phone let me to flash the firmware, I didn't know how but the phone allowed me to flash things throw recovery(using dload method). At the begin I only could access to erecovery and fastboot. I suppose that I broke system and data partition and while I looked/unlocked the bootloader, the wipe fixed the partition table. Sorry I'm tired and I know that my English sucks, I hope you understand what I have written.
How did you enter erecovery as this isn't working for me.... What did you flash over fastboot?
Have you tried flashing the firmware separately using adb on computer?
For this you just need to extract the Update.app using the firmware extractor for huawei. Then flash them individually using adb commands in cmd.
I can't access any state that would allow to do adb.
faeArai said:
How did you enter erecovery as this isn't working for me.... What did you flash over fastboot?
Click to expand...
Click to collapse
sorry. I'll try to explain better, however on Huawei/honor devices there are not one but two recoveries, so one is the normal recovery flashed in recovery partition, the second one is the Huawei recovery that is flashed in recovery2 partition, so if you didn't touch recovery2 partition, your erecovery is still there, now, if you press VOL+ VOL- and POWER it will reboot to recovery2 and it starts to flash something from dload in your sd card, so in my opinion you should do this things, first try this method to flash rollback package(this is the transition package from 7 to 6 and you will find it on honor site) if this is still not working try locking and unlocking again your bootloader(I hope this fix partitions of your device) then try to enter recovery and do a wipe and then boot your device, if this doesn't work flash rollback package(now it would work) and then flash an emui 4 full firmware image, always using dload method. trust me... I did the same... and it worked for me. let me know if it works for you :good:
faeArai said:
So I had an unlocked H8 with LOS. As I wanted to install EMUI, I put the proper restore Update.app into the dload folder and started Huawei's recovery. Everything went well, I formated data and wanted to install the EMUI 4.1 ROM using the same method.
Unfortunately my H8 is bootlooping and there is now way into erecovery nor any other recovery. It simply reboots on every single known vol up or down key pressing combination. The only thing I can go to is fastboot mode when holding down vol down and plugging in usb wire. But, it says frd locked and I can't install nor boot twrp. It's simply gone and reboots all the time.
Any hints? I can't even turn it off.
Click to expand...
Click to collapse
I ran into this issue not that long ago. What you have to do is relock your bootloader using ADB. The ADB commands and instructions can be found in this thread.
Just a FYI, do not use the links to the software listed in that thread as it is a little outdated. The method still works but the software will probably not work. Just be sure to get the most recent/appropriate version of SuperSU and TWRP via their official threads (This is if you want to re-root). There are Honor 8 specific TWRP files if I remember correctly, so be sure to check around the Honor 8 forums for the correct files.
A quick summary of what I did:
1) Power your phone off and then boot into fastboot by holding Vol down + Power; as soon as it boots up, plug your phone into your combuter via your usb cord.
2) With ADB running, type:
Code:
fastboot oem relock [COLOR="LightBlue"]################[/COLOR]
NOTE: The '#' should be replaced with your unique unlock code that you obtained to unlock your bootloader.
3) Wait for it to format and reset your phone and go through the setup. BE SURE TO BYPASS all google registration; skip everything you can to get into the phone itself. If you do register, it will reactivate FRP and you'll have to start over again.
4) Turn on USB Debugging and every other setting that enables developer administrative navigation and control just to be safe. USB Debugging being the most important one, though.
5) Restart your phone and boot into fastboot again using Vol down + Power.
6) Unlock your phone again with:
Code:
fastboot oem unlock [COLOR="LightBlue"]################[/COLOR]
7) Once the command is entered, it'll reset your phone once more and - as stated before - bypass/skip all google (FRP) registration.
8) Enable developer options and USB debugging again and make sure that OEM Unlocked is checked and grayed out.
9) Reboot into fastboot mode to confirm that FRP is disabled and you should be able to install TWRP now via ADB.
@Numerics thanks. The thing is, that I can't boot anything. I can't even go into eRecovery. Nor can I flash a stock EMUI 4.1. It just boot loops all the time and I can only access fastboot.
If you can flash twrp..........Install los or other Rom ..................Go back to stock.......you must flash b360 ober adb...... because los is 7.1...............if you on b360 you can usw the rollback for emui 4.1........,..............sry for bad english
I can easily go to fastboot. But I can't flash anything. I extracted the img from the update.app but can't flash. It simply says that it's not permitted.
faeArai said:
I can easily go to fastboot. But I can't flash anything. I extracted the img from the update.app but can't flash. It simply says that it's not permitted.
Click to expand...
Click to collapse
With my method, you don't need to flash anything. Just relock your bootloader via adb in fastboot mode and let it reset. Unless I'm not understanding your issue entirely.
@Numerics as I said, in won't boot anything as it is constantly boot looping. There is no way to access any kind of recovery nor erecovery. There is no boot into Android. The only thing accessible right now is fast boot (which is not ADB). But even in fast boot I can't do anything als operations are not permitted.
after boot looping and starting fast boot mode, I can see a "Android reboot reason" section saying:
AP_S_PANIC
data is invalid
There is still a lineageos installed on system as firmware but as I tried to get rid of it by going back to stock EMUI, I guess Huawei's rollback did something wrong and killed recovery (although I did it in the past successfully).
I tried to run HiSuite to recover my phone, but it just says, that my phone is not supported.
Speaking of this, Huawei messed up with that whole fastboot locking bull****.
faeArai said:
@Numerics as I said, in won't boot anything as it is constantly boot looping. There is no way to access any kind of recovery nor erecovery. There is no boot into Android. The only thing accessible right now is fast boot (which is not ADB). But even in fast boot I can't do anything als operations are not permitted.
after boot looping and starting fast boot mode, I can see a "Android reboot reason" section saying:
AP_S_PANIC
data is invalid
There is still a lineageos installed on system as firmware but as I tried to get rid of it by going back to stock EMUI, I guess Huawei's rollback did something wrong and killed recovery (although I did it in the past successfully).
I tried to run HiSuite to recover my phone, but it just says, that my phone is not supported.
Speaking of this, Huawei messed up with that whole fastboot locking bull****.
Click to expand...
Click to collapse
No, I know ADB isn't Fastboot. What I'm trying to say is that you should be able to still run ADB via CMD on Windows when you're in fastboot mode to relock your bootloader with the directions I gave in my previous post. It'll force-restore your phone to a non-bricked/vanilla state. At least that is how I fixed mine.
Like... You can't even try using the 'fastboot oem relock ################' function via the ADB console while in fastboot?
yes boy trust us, you haven't a working OS so it is a normal thing that your phone reboot, you cannot access to recovery because some partitions are corrupted (data partition) , so these are the steps that could help you:
1) using fastboot, relock your boot loader
2)using fastboot, unlock your boot loader (partition table would be ok now, and you would be able to use load method to flash things trow stock recovery)
4)put inside your sd card \dload\update.app(use rollback package)
3) press all the buttons while your device is rebooting(do this before the blue screen logo appear), your phone is now looking for something inside your sd card
5) if the next step doesn't work do a factory reset from recovery that now would be working
6) put inside your sd card a full android 6 (emus 4) update.app and pressing all buttons it will install the firmware
7) your device now is locked and back to stock, maybe without cust partition or maybe in test mode but it is certainly alive
8) do a factory reset and reinstall the firmware
9) your phone is now ok
You don't lock the bootloader via ADB but via fastboot.
As I said, northing was restored and nothing is booting and I can't unlock my bootloader again. As I said, recovery is not working so the file in dload is not loaded and used. Which is strange.
Locking bootloader didn't do anything besides locking the bootloader. Device is still dead and I still can only access fastboot.
faeArai said:
You don't lock the bootloader via ADB but via fastboot.
As I said, northing was restored and nothing is booting and I can't unlock my bootloader again. As I said, recovery is not working so the file in dload is not loaded and used. Which is strange.
Locking bootloader didn't do anything besides locking the bootloader. Device is still dead and I still can only access fastboot.
Click to expand...
Click to collapse
Which model do u own?
Sent from my Honor 8 using XDA Labs
The European one.
faeArai said:
You don't lock the bootloader via ADB but via fastboot.
As I said, northing was restored and nothing is booting and I can't unlock my bootloader again. As I said, recovery is not working so the file in dload is not loaded and used. Which is strange.
Locking bootloader didn't do anything besides locking the bootloader. Device is still dead and I still can only access fastboot.
Click to expand...
Click to collapse
This is not the truth.....locking bootloader will erase all your data and fix partitions....and with fixed partition you can access to recovery ......trust me the only thing that you can do is to lock your bootloader......you can't flash anything from fastboot and boot recovery or system now...... lock your bootloader and then unlock it again, try using "fastboot OEM lock *****" or "fastboot OEM relock *******" (try cmd runned as admin, people say that this makes the difference) then unlock your device again and .....magic your recovery will boot......the same thing happened to me and I fixed my phone using this trick, however, even if you had frp unlocked it would say you that isn't possible to write anything because you broke some partition, and that's the reason why you can't boot recovery, wait one second and think: why doesn't my recovery boot?
It has nothing to do with trust. I did it and device is still a full stone brick. Nothing changed by locking the bootloader besides that now I can't unlock the bootloader anymore.
I haven't really touched this tablet in a while, but i wanted to start using it again. I was running BlissPop. It was slow, and kept giving me an error when it was trying to update, so I decided to try a different ROM. So I downloaded the lineageOS ROM and tried to flash it.
However, TWRP kept giving me an error when I tried to flash the ROM. I don't remember exactly what the error was.
So, I thought that I needed to update TWRP. I tried through the "Official TWRP" app, but after doing so I was unable to boot into recovery mode at all. I could still get to the bootloader, but when I tried to select recovery mode it would give me an error and dump me back out to the bootloader menu.
I tried installing twrp through "TWRP Manager" app, but it just says "something went wrong"
I tried doing this using ADB. I connected the tablet, enabled USB debugging. If i do the ">adb devices" command, I can see the tablet. Then I did >adb reboot bootloader - which works, it reboots the device into the bootloader. But then I try and flash recovery and nothing happens, it just says <waiting for device>. And if I do > fastboot devices it doesn't list any devices.
If I reboot to the bootloader and select "Recovery Mode' i just get the nvidia boot logo and it stays there forever.
I don't know what else to try at this point.
I think I could get this to work if I could just get fastboot to recognize my device, but I'm not sure what's preventing that from happening.
mattlokk said:
I haven't really touched this tablet in a while, but i wanted to start using it again. I was running BlissPop. It was slow, and kept giving me an error when it was trying to update, so I decided to try a different ROM. So I downloaded the lineageOS ROM and tried to flash it.
However, TWRP kept giving me an error when I tried to flash the ROM. I don't remember exactly what the error was.
So, I thought that I needed to update TWRP. I tried through the "Official TWRP" app, but after doing so I was unable to boot into recovery mode at all. I could still get to the bootloader, but when I tried to select recovery mode it would give me an error and dump me back out to the bootloader menu.
I tried installing twrp through "TWRP Manager" app, but it just says "something went wrong"
I tried doing this using ADB. I connected the tablet, enabled USB debugging. If i do the ">adb devices" command, I can see the tablet. Then I did >adb reboot bootloader - which works, it reboots the device into the bootloader. But then I try and flash recovery and nothing happens, it just says <waiting for device>. And if I do > fastboot devices it doesn't list any devices.
If I reboot to the bootloader and select "Recovery Mode' i just get the nvidia boot logo and it stays there forever.
I don't know what else to try at this point.
I think I could get this to work if I could just get fastboot to recognize my device, but I'm not sure what's preventing that from happening.
Click to expand...
Click to collapse
Did you set:
Allow oem unlock in dev opt.
Fastboot protocol into BL?
Twrp app & manager need root to work.
Just flash the latest stock ROM first, lineageos requires having latest firmware.
I wrote a little guide not long ago about that (obviously, you can skip the F2FS steps if you don't need F2FS and just flash ROM after flashing latest TWRP)
Link
thanks for the help, i'll try and work through this soon.
fpozar said:
Just flash the latest stock ROM first, lineageos requires having latest firmware.
I wrote a little guide not long ago about that (obviously, you can skip the F2FS steps if you don't need F2FS and just flash ROM after flashing latest TWRP)
Link
Click to expand...
Click to collapse
I had seen your thread, and was intending on following it. nice post. 2 quick questions though
1) this is a shield tablet that was supposed to be remotely bricked by nvidia after the warranty claim. Will that happen if I flash the official recovery ROM?
2) how would I even flash that rom if I can't get recovery mode to work in trwp?
I think the root problem that I'm having is that I can't seem to connect to the device via fastboot (i'm sure i used the wrong terminology somehow)
edit: well I downloaded the USB driver for the shield tablet from nvidia, and i was able to install that (rather than the google usb driver). Fastboot finally recognized my device after that. I'm trying to flash the recovery now, but it doesn't seem to be doing anything, just been stuck on this screen for a while now: https://i.imgur.com/BUwj3Hx.png guess I'll continue to wait a while.
edit 2: well, finally got TWRP to flash over fastboot (https://i.imgur.com/tV1DqDv.png) however I still can't enter recovery mode. I just get the nvidia boot logo and then nothing happens. TWRP manager still says i don't have it installed either.
i'm about ready to give up on this... i've spent like 6 hours on this crap already and I feel like I keep getting further away from it.
mattlokk said:
I had seen your thread, and was intending on following it. nice post. 2 quick questions though
1) this is a shield tablet that was supposed to be remotely bricked by nvidia after the warranty claim. Will that happen if I flash the official recovery ROM?
2) how would I even flash that rom if I can't get recovery mode to work in trwp?
I think the root problem that I'm having is that I can't seem to connect to the device via fastboot (i'm sure i used the wrong terminology somehow)
edit: well I downloaded the USB driver for the shield tablet from nvidia, and i was able to install that (rather than the google usb driver). Fastboot finally recognized my device after that. I'm trying to flash the recovery now, but it doesn't seem to be doing anything, just been stuck on this screen for a while now: https://i.imgur.com/BUwj3Hx.png guess I'll continue to wait a while.
edit 2: well, finally got TWRP to flash over fastboot (https://i.imgur.com/tV1DqDv.png) however I still can't enter recovery mode. I just get the nvidia boot logo and then nothing happens. TWRP manager still says i don't have it installed either.
i'm about ready to give up on this... i've spent like 6 hours on this crap already and I feel like I keep getting further away from it.
Click to expand...
Click to collapse
Okay so I'm guessing you have stock ROM.
To flash TWRP you have to enter fastboot mode (vol down + power I believe) and flash the twrp image with fastboot flash recovery twrp.img (rename the shield tablet twrp to just twrp.img and place it into your easy adb and fastboot folder)
And DON'T reboot into OS, rather use your volume buttons to navigate to "restart to recovery" or just use hardware keys again directly from TWRP (vol up + power).
Good luck
fpozar said:
And DON'T reboot into OS, rather use your volume buttons to navigate to "restart to recovery" or just use hardware keys again directly from TWRP (vol up + power).
Good luck
Click to expand...
Click to collapse
Agreed. This is probably what is happening (as described on the TWRP webpage here:
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
Alternately, immediately rooting (flash SuperSU or Magisk) right after flashing TWRP, will prevent TWRP from being replaced with stock recovery.
Although the inconsistent fastboot connection, and how much trouble you had flashing TWRP initially, is a bit worrisome. Try using a different cable (maybe the one you are using is not connecting well?) try another USB port on the computer, and don't use a USB hub (connect direct to the PC).
Well, like they say: persistence is key. I kept pushing and trying new things until eventually.... I bricked the device. No, not really, it's working great now on LineageOS.
Thanks again to everyone who helped me out :good:. I'm still not sure exactly what caused TWRP to stop working on my device, however following this guide helped me fix it: https://forum.xda-developers.com/shield-tablet/help/help-stuck-nvidia-boot-screen-t3076462
The "flash-all.bat" restored everything to stock (including the recovery mode) and after that I was able to flash the latest TWRP and install Lineage.
I have a Honor 6x (BLN-L24) with EMUI 5+, Android Nougat, all updated. It is the U.S. edition. I unlocked the Bootloader, installed ADB / Fastboot tools and can flash the correct TWRP recovery image (3.1.1-0-berlin.img) but everytime I try to reboot into recovery, the standard EMUI recover overwrites TWRP and I just end up in the EMUI recovery.
I've looked at every forum I can find, articles, etc... but can't wrap my head around this one. If anyone with a similar experience and/or with a solution could help, I'd be most grateful.
Thank you!
I agree with with Rommco05. He IS correct, as I wondered the same thing till I realized to try unplugging it. Also make sure its the Power AND up buttons at same time. If you happen to hold only the up button it will take you to the erecovery feature where it trys hooking to WiFi for updates , which wont help you either.
Still doesn't work
Thanks for the responses. Unfortunately, unplugging doesn't do it either with the key combination you suggested. The following article is helpful for key combinations but alas, it still won't load into TWRP.
It is really strange as I can't even get past "Your device has been unlocked and can't be trusted" screen now. It just stays there...
Super frustrating. I didn't know if it had anything to do with my model being the BLN-L24 US version. I bought it at BestBuy unlocked.
Also, when I try to download "Latest Version and Recovery" from "Huawei eRecovery", I'm getting "Getting package info failed". I
Try OpenKirin twrp from recoveries section here on 6X forums
etmartinkazoo said:
Super frustrating. I didn't know if it had anything to do with my model being the BLN-L24 US version. I bought it at BestBuy unlocked.
Click to expand...
Click to collapse
That's not the cause. My phone is also a BLN-L24 purchased from Best Buy and I have no issues using TWRP. What did you do after you install TWRP? Did you let the phone just reboot or did you try to go into TWRP before rebooting?
This is straight from TWRP website:
"Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install."
Key combination timing?
galapagos said:
That's not the cause. My phone is also a BLN-L24 purchased from Best Buy and I have no issues using TWRP. What did you do after you install TWRP? Did you let the phone just reboot or did you try to go into TWRP before rebooting?
This is straight from TWRP website:
"Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install."
Click to expand...
Click to collapse
This is helpful, thank you. I found a page "Key Combinations Clarified for Honor 6x" which has a number of key combinations but nothing is helpful in my case that I know of. Do I use these key combinations imediately after the flash?
Is there a specific tutorial or guide that was helpful for you? I'd be grateful for any further assistance.
Thanks.
Rommco05 said:
You need enter to recovery? TWRP?
Click to expand...
Click to collapse
That is the problem, I'm unable to enter TWRP after flashing it, unplugging the usb cable, holding power/volume up...
Finally got Twrp installed. Rooted and installed custom Rom (lineageos) but when I reboot after flash screen, it's just blank...
If I were you, I would go completely back to stock and start over. Once you fastboot flash TWRP, it is imperative that you reboot back into TWRP before booting into the OS. Also, bootloaders don't overwrite recoveries. They are separate partitions, so your title is a bit misleading.
Regardless, you must still have stock recovery on your device since it is "defaulting" to that instead of TWRP. Like I said, it is extremely important to boot into recovery after you first flash it.
fastboot flash recovery recovery.img
let it do it's thing.
fastboot reboot recovery OR you can do it manually in TWRP right after the flash.
Have you tried rebooting to recovery from the system?
Connect your device to your computer, enable USB Debugging, and run
Code:
adb reboot recovery
from Windows CMD or Linux Shell, or any other one you prefer.
If this works, then you are doing the recovery key combination wrong.
Cheers
I'm having the same issue as OP. I have a BLN-L24 from Best Buy in the US. Reverted to emui 4.1 and android 6, unlocked bootloader, flashed twrp-3.2.1-0-berlin.img, and it keeps booting into huawei erecovery.
I didn't get any info on what the OP actually did to get twrp installed.
FWIW, there is no "fastboot reboot recovery"
FWIW2, you can't turn off the honor 6x from the bootloader. the best you can do is a hard reboot.
etmartinkazoo said:
That is the problem, I'm unable to enter TWRP after flashing it, unplugging the usb cable, holding power/volume up...
Click to expand...
Click to collapse
I'm having your exact same problem. I can get into fastboot mode, flash TWRP berlin, but I cannot enter TWRP after flash. It just goes back to the normal warning screen "this phone is unlocked", boot normally or go to EMUI recovery.
What worked for you?
hexag1 said:
I'm having your exact same problem. I can get into fastboot mode, flash TWRP berlin, but I cannot enter TWRP after flash. It just goes back to the normal warning screen "this phone is unlocked", boot normally or go to EMUI recovery.
What worked for you?
Click to expand...
Click to collapse
RedSkull fixed my problem!
Had a bad idea this morning and decided to try to root the phone, leagoo t5. The last time Im going to go messing with a phone that wasnt broken! after spending 10hrs trying to sort it! I downloaded adb tools and and twrp. I unlocked the bootloader with fastboot and installed twrp. However when I rebooted the phone it just booted straight into twrp. I cant get it to boot normally. I reinstalled the firmware but it will still not boot. I can get into recovery and factory modes but thats it. what can I do? Thanks
pcfreeze said:
Had a bad idea this morning and decided to try to root the phone, leagoo t5. The last time Im going to go messing with a phone that wasnt broken! after spending 10hrs trying to sort it! I downloaded adb tools and and twrp. I unlocked the bootloader with fastboot and installed twrp. However when I rebooted the phone it just booted straight into twrp. I cant get it to boot normally. I reinstalled the firmware but it will still not boot. I can get into recovery and factory modes but thats it. what can I do? Thanks
Click to expand...
Click to collapse
Have you tried factory resetting in recovery?
ktmom said:
Have you tried factory resetting in recovery?
Click to expand...
Click to collapse
Yes I did. No Joy. When I power on I just get the leagoo logo coming on and off repeatedly. Pressing the power button then will not turn the phone off again. I can switch it off by pressing vol- and pwr together though.
Is the problem caused by unlocking the bootloader with fastboot or that the firmware I installed is not suiting? Rebooting the phone after unlocking the bootloader before reflashing the firmware caused the leagoo logo to come on and off repeatedly accompanied by this message in very small text "Orange State - Your device has been unlocked and can't be trusted, Your device will boot in 5 seconds". After flashing the firmware with Sp Flash Tool this message is not being shown. Does reflashing firmware undo the action of unlocking the bootloader?
What your are describing is a bootloop. It sounds like the device can not find the system kernel to boot to. Did you boot the device after unlocking but before doing anything else?
Where did you get the TWRP recovery from?
Isn't this a mediatek chipset? If so, I think you need to use SP Flash Tool*to install.
I would look for a stock ROM for this device to revert to.
I'm not experienced on mediatek devices, but maybe @SubwayChamp could help.
pcfreeze said:
Yes I did. No Joy. When I power on I just get the leagoo logo coming on and off repeatedly. Pressing the power button then will not turn the phone off again. I can switch it off by pressing vol- and pwr together though.
Is the problem caused by unlocking the bootloader with fastboot or that the firmware I installed is not suiting? Rebooting the phone after unlocking the bootloader before reflashing the firmware caused the leagoo logo to come on and off repeatedly accompanied by this message in very small text "Orange State - Your device has been unlocked and can't be trusted, Your device will boot in 5 seconds". After flashing the firmware with Sp Flash Tool this message is not being shown. Does reflashing firmware undo the action of unlocking the bootloader?
Click to expand...
Click to collapse
Then to unlock bootloader is not normal that Android refuses to boot normally but when you flash a custom recovery or modify other partition this usually could happen so either or both you have to do a factory resetting/format data as @ktmom said or/and flash a kind of DM-verity for your device, this last avoids that bootloader checks the integrity of the partitions and can boot normally to system.
The warning message is normal then to unlock bootloader and reflashing the stock rom doesn´t relock it, you have to relock it at similar way that you unlocked it via fastboot command, most commom is "fastboot oem relock" but there are other variants and keep in mind that you have to return completely to stock before to apply it.
SubwayChamp said:
Then to unlock bootloader is not normal that Android refuses to boot normally but when you flash a custom recovery or modify other partition this usually could happen so either or both you have to do a factory resetting/format data as @ktmom said or/and flash a kind of DM-verity for your device, this last avoids that bootloader checks the integrity of the partitions and can boot normally to system.
The warning message is normal then to unlock bootloader and reflashing the stock rom doesn´t relock it, you have to relock it at similar way that you unlocked it via fastboot command, most commom is "fastboot oem relock" but there are other variants and keep in mind that you have to return completely to stock before to apply it.
Click to expand...
Click to collapse
I relocked the boot loader with the command "fastboot flashing lock". small white text dialogue on phone screen stated bootloader was locked successfully. rebooted phone then and it was still stuck in the boot loop. For a few seconds in between the leagoo logo a strange circular graphic was displayed on the phone with word "erasing" under it. What does this mean?
Can you tell me more about how to flash DM-verity?
pcfreeze said:
I relocked the boot loader with the command "fastboot flashing lock". small white text dialogue on phone screen stated bootloader was locked successfully. rebooted phone then and it was still stuck in the boot loop. For a few seconds in between the leagoo logo a strange circular graphic was displayed on the phone with word "erasing" under it. What does this mean?
Can you tell me more about how to flash DM-verity?
Click to expand...
Click to collapse
Ok, then to relock bootloader I guess that you did successfully boot to system again, right?
When you unlocked bootloader first then device is formatted to avoid a new user can access to the user´s data and when you relock it again the same happens.
As for DM-verity, newer devices strictly since nougat can´t boot to system after any partition was modified like happened when you flashed a custom recovery on it, here is when DM-verity can be useful, is used to avoid bootloader checks the integrity and allow a modified device can perform a reboot and more custom actions not officially permitted. You had to flash it through a custom recovery, sometimes flashing only Magisk is enough but not always.
You *might* be able to use this universal dm-verify script. It can be flashed only in a custom recovery and I'm not certain that is available to you.
ktmom said:
You *might* be able to use this universal dm-verify script. It can be flashed only in a custom recovery and I'm not certain that is available to you.
Click to expand...
Click to collapse
Good news and bad news! I got the phone to boot! I reinstalled twrp and the "magisk","no verity opt encrypt" and "disable dm verity" zips from the ext sdcard with fastboot. Twrp stated the zips installed ok but there were also some red line failure lines in the dialogue as they were being installed. I rebooted the phone via fastboot but this just resulted in it booting direct to twrp as before. I tried normal boot from twrp but it still booted straight back to twrp. I then tried selecting normal boot from the fastboot, normal, recovery option menu accessed on the Leagoo T5 by powering off the phone and then pressing the pwr and vol+ buttons together but this still resulted in it booting straight to twrp. I then decided to uninstall twrp by flashing the stock firmware recovery image to try to boot from stock recovery. I did same and rebooted from fastboot and it booted to system.
The bad news is there is an imei failure message and the sim is not connecting to the network.I googled imei failure and saw that its can happen when firmware is changed. I installed the "mobileuncle" app but according to a youtube video I watched, when I tap "Engineer Mode" there should be 2 further options available, one being MTK Mode. I am only getting one option "Engineering Mode (Android) which when I select just results in being returned to the previous menu. please say this is not a major problem!
@pcfreeze you quoted me, but as I said earlier, I'm not experienced with mediatek devices. You'd be better off quoting @SubwayChamp
pcfreeze said:
Good news and bad news! I got the phone to boot! I reinstalled twrp and the "magisk","no verity opt encrypt" and "disable dm verity" zips from the ext sdcard with fastboot. Twrp stated the zips installed ok but there were also some red line failure lines in the dialogue as they were being installed. I rebooted the phone via fastboot but this just resulted in it booting direct to twrp as before. I tried normal boot from twrp but it still booted straight back to twrp. I then tried selecting normal boot from the fastboot, normal, recovery option menu accessed on the Leagoo T5 by powering off the phone and then pressing the pwr and vol+ buttons together but this still resulted in it booting straight to twrp. I then decided to uninstall twrp by flashing the stock firmware recovery image to try to boot from stock recovery. I did same and rebooted from fastboot and it booted to system.
The bad news is there is an imei failure message and the sim is not connecting to the network.I googled imei failure and saw that its can happen when firmware is changed. I installed the "mobileuncle" app but according to a youtube video I watched, when I tap "Engineer Mode" there should be 2 further options available, one being MTK Mode. I am only getting one option "Engineering Mode (Android) which when I select just results in being returned to the previous menu. please say this is not a major problem!
Click to expand...
Click to collapse
It could be many reasons why device didn´t boot to system. Then to flash it you had to format data + flash DM-verity. Also is possible that this TWRP version is not completely suitable for your device or is unable to mount/unmount partitions correctly, you have to check from where you downloaded it and if some users are experiencing similar issues with it.
As per you IMEI lost, better is ever take a backup of the NVRAM through TWRP before to go further then it´ll be easy to recover it. In almost all firmwares for mediatek devices you´ll fnd inside the zips SPFT and SN Writer that is to recover your IMEI. Your IMEI is not really lost only got actually covered by blank codes due to a bad/incorrect flashing/wrong sequence firmware, so be careful what you do with Mobile Uncle tool if you´re not experimented with otherwise you´ll lost permanently.
SubwayChamp said:
It could be many reasons why device didn´t boot to system. Then to flash it you had to format data + flash DM-verity. Also is possible that this TWRP version is not completely suitable for your device or is unable to mount/unmount partitions correctly, you have to check from where you downloaded it and if some users are experiencing similar issues with it.
As per you IMEI lost, better is ever take a backup of the NVRAM through TWRP before to go further then it´ll be easy to recover it. In almost all firmwares for mediatek devices you´ll fnd inside the zips SPFT and SN Writer that is to recover your IMEI. Your IMEI is not really lost only got actually covered by blank codes due to a bad/incorrect flashing/wrong sequence firmware, so be careful what you do with Mobile Uncle tool if you´re not experimented with otherwise you´ll lost permanently.
Click to expand...
Click to collapse
I got into engineering mode via dialer code. CDS option was missing from connectivity. I installed https://m.apkpure.com/cds-mobile/com.doubleapaper.cds.cds_mobile but CDS is still missing from engineering mode
pcfreeze said:
I got into engineering mode via dialer code. CDS option was missing from connectivity. I installed https://m.apkpure.com/cds-mobile/com.doubleapaper.cds.cds_mobile but CDS is still missing from engineering mode
Click to expand...
Click to collapse
Sorry, just realised that this is the wrong app! nothing to do with cds in engineering mode! I triedhttps://apkcombo.com/common-data-service/com.mediatek.connectivity/
but got message that the file was corrupted and it would not install