Related
my oneplus 9 2110 stck in edl mode i cant reboot it by pressing volumeup/volume down and power button at same time but it doesnt reboot please help now how i can flash it with in edl mode or any msm tool for oneplus 9
Please describe what you did.
Did you try to root your phone?
Did you use any software to alter your phone?
With the right flash commands you can very easy recover your phone. You only need to pay attention to the steps.
noname122414 said:
Please describe what you did.
Did you try to root your phone?
Did you use any software to alter your phone?
With the right flash commands you can very easy recover your phone. You only need to pay attention to the steps.
Click to expand...
Click to collapse
My phone is in edl mode I can't go in to fastboot
My phone is rooted on 11.4.4.4 Eu i try to Flash 11.2.2.2 Global but unfortunately my phone bricked
Try holding different button combos for 5to10 seconds. Power and vol up
Shooter7889 said:
Try holding different button combos for 5to10 seconds. Power and vol up
Click to expand...
Click to collapse
I try all but it doesn't go to fastboot/recovery mode
Oh. Sometimes if I've been stuck in edl I could hold power and vol+ until it would finally boot or at least go to BL
Shooter7889 said:
Oh. Sometimes if I've been stuck in edl I could hold power and vol+ until it would finally boot or at least go to BL
Click to expand...
Click to collapse
Not work brother
Sry. Maybe it was power and vol-... It's been a while since I had been stuck in edl on my 7pro. Hope u find a way
Shooter7889 said:
Sry. Maybe it was power and vol-... It's been a while since I had been stuck in edl on my 7pro. Hope u find a way
Click to expand...
Click to collapse
Not work brother
When i connect to pc it show qualcomm 9008
Wolverine619 said:
Not work brother
When i connect to pc it show qualcomm 9008
Click to expand...
Click to collapse
Do fastboot commands work, you can reboot with them. Then try to flash back to a working EU rom.
noname122414 said:
Do fastboot commands work, you can reboot with them. Then try to flash back to a working EU rom.
Click to expand...
Click to collapse
Fastboot cmd also doesn't work
noname122414 said:
Do fastboot commands work, you can reboot with them. Then try to flash back to a working EU rom.
Click to expand...
Click to collapse
No thing work brother just waiting for msm tool
If anyone know another tool for flash in edl mode please tell me
Have to hold just the power button a very long time. Longer then you think is reasonable
You are supposed to use this post I think. Please edit the main post to the current status of your phone. What can you do and what you can't, maybe we'll be able to help.
Hi there, I am encountering the same issue.
It is a chinese op9
The situation:
The screen is totally black
connecting to power supply - no reaction
holding only power (30 sec) - no reaction
holding + - loudness - no reaction
holding + + loudness - seams like a reboot, because windows is reacting to it "Qualcom HS-USB QDLoader 9008 - Com4" work is disapearing and later on reapearing in device manager
In the MSM Tool it says:
1. Try to get PBL info
2. start download firehose binary and after 18sec.
3. Sahara communication failed....always
Any ideas or advices?
BR
AxelM said:
Hi there, I am encountering the same issue.
It is a chinese op9
The situation:
The screen is totally black
connecting to power supply - no reaction
holding only power (30 sec) - no reaction
holding + - loudness - no reaction
holding + + loudness - seams like a reboot, because windows is reacting to it "Qualcom HS-USB QDLoader 9008 - Com4" work is disapearing and later on reapearing in device manager
In the MSM Tool it says:
1. Try to get PBL info
2. start download firehose binary and after 18sec.
3. Sahara communication failed....always
Any ideas or advices?
BR
Click to expand...
Click to collapse
Same brother if you find any solution please share it with me also
So I sent my chinese device LE2110 to OP Europe and the repair should cost 380€....to fix a software bug....
Hello,
I followed the steps for the T-Mobile unlock...unlocked the SIM and the bootloader with the unlock token from OnePlus. When I rebooted after running 'fastboot oem unlock', I did not have root yet, I was not able to backup my partitions. Apps like Maps would crash immediately.
Stupidly, I decided to move forward with installing the latest global open beta rom using https://forum.xda-developers.com/t/convert-t-mobile-oneplus-9-to-global-or-other-firmware.4277169/
Once i executed flash_all, I saw errors for being unable to write to partitions and most of the .img files failed to install.... due to me not having root. At this point I was stuck in fastboot mode. I was NOT in fastbootd, I did not run 'fastboot reboot fastboot'. I was in the bootloader instead.
Since I'm on linux i went ahead and downloaded the Tmo MSM tool on my windows box and went to bed.
Even more stupidly I did not plug in my phone, and it died overnight
I can get it to boot for a second or two holding down the power button + volume down. Neither ADB nor fastboot can see my device.
I'm pretty sure I hosed the phone, just checking with you guys to make sure.
I'd appreciate any help.....
Update: When I use the MSM tool, i see the qualcom driver being used. However I'm not sure how to get the phone to be seen, i've tried holding down the volume up/down + power button at the same time.
MSM tool can't see the COM....Is there another way to enter the LDS or whatever?
You need the correct drivers and will need to go to advanced reboot, troubleshooting, allow unsigned driver option to be able to install the driver.
GLOBAL OnePlus 9 MSM TOOL UPDATED
Frist off Im not responsible for anything that happens to your phone!!! VERY SIMPLE IF YOU ARE BICKED,BOOTLOOPED OR JUST WANT TO GO BACK TO 100% STOCK THIS WILL WIPE ALL DATA!!! AN RELOCK BOOTLOADER OOS 11.2.4.4.LE25AA MUST HAVE QAULCOMM...
forum.xda-developers.com
I had similar issue and had to hold power and volume up to reconize the device. I thought it just wouldn't power on.
Yetry vol+ and Power for like 20sec.
Just an idea.
I'm in the same situation. Got my unlock token, ran it, and then....
EDIT: I just read something about using the OnePlus 9 Pro India MSM tool, and click "Lite Firehose"
onepluscommunityserver.com/list/Unbrick_Tools/
we shall see....
Fixed using Tmo MSM. Switched Firehose on/off. Thanks everyone!
I hard bricked my phone while attempting to convert my device to global. I have never seen a device this dead though, it won't attempt to boot, it gives no vibration when chargers are plugged in, holding the power and volume keys for extended times does absolutely nothing, the device acts like it is absolutely fried.
I tried leaving it on the charger for about an hour and still, there is no sign of life. This was a new (to me) refurbished device that I just got a few weeks ago. Is there anything I can do or try?
You should have all this in place prior to doing anything to device. Unsure if you can even boot edl mode for msm tool now. Probably so !! https://onepluscommunityserver.com/list/Unbrick_Tools/
Find your variant and Google how to use msm tool. Gl bud
mattie_49 said:
You should have all this in place prior to doing anything to device. Unsure if you can even boot edl mode for msm tool now. Probably so !! https://onepluscommunityserver.com/list/Unbrick_Tools/
Find your variant and Google how to use msm tool. Gl bud
Click to expand...
Click to collapse
And power button and vol + & vol - all 3 together plugged into pc will get you to edl mode. Which is how msm tool connects to device
mattie_49 said:
And power button and vol + & vol - all 3 together plugged into pc will get you to edl mode. Which is how msm tool connects to device
Click to expand...
Click to collapse
For some reason I could never get into EDL mode after brick to Qualcomm error. I used the key command you mentioned after plugging in and nothing happened. I even held it for over a minute. Also the tool on OP site didn't work either. I had to send my device for repair under warranty with OnePlus and lost my unlocked bootloader and device was locked and OEM option greyed out again. After OTA A12 update the other day I could OEM unlock. Waiting for unlock code again
mattie_49 said:
And power button and vol + & vol - all 3 together plugged into pc will get you to edl mode. Which is how msm tool connects to device
Click to expand...
Click to collapse
Turn your phone off, 30 secs or so, then hold +- volume buttons only, then connect usb lead keep hold until the Qualcomm driver is visible inside device manager ,
Here's driver msm tool from op direct , driver is setup exe ,worked for on total brick m8, and downgrade from android 12 with it too
File folder on MEGA
mega.nz
Here's driver msm tool from op direct , driver is setup exe ,worked for on total brick m8, and downgrade from android 23 with it t
File folder on MEGA
mega.nz
When I used the Fastboot Enhance tool to flash the payload.bin file, after the flash process finished I try to reboot but unfortunately it was dead.
No Fastboot, no EDL, no recovery, 3 buttons not working, power with up/down not working, when i connect to PC no sound that the pc recognize the phone "OP 8T", when I plug it into charger no info showing, Just black screen.
So it's working now, I'll explain everything here so it might help.
My device is OnePlus 8T DDR5 version
first, I understand what happened to me, I think the tool didn't recognize ram type automatically so it was flash DDR4 on a DDR5 device, so it made a hard brick
at this point, the idea is to connect 2 test points, and you can force your phone to enter to EDL mode, and we can do it in two ways:
1. Rootk1t giude, thax bro Rootk1t
- Removing the back panel by heating it.
- Unplugging battery
- Then use the EDL points on the motherboard to force the device to boot EDL.
- The device immediately will be recognised with just one tap on "enum" now.
- Plugging the battery again and attaching the back panel and rebooting
2. By using deep EDL cable, but not any edl cable, it must be a moded cable so it can be worked with the new security ...... this link will explain
Hydra Tool Gift Xiaomi, Huawei, Redmi Qualcomm EDL Mode New V2 Cable!! - GSM-Forum
Hydra Tool Gift Xiaomi, Huawei, Redmi Qualcomm EDL Mode New V2 Cable!! Hydra Tool New Type-C EDL cable Schematic With this cable you can reboot your
forum.gsmhosting.com
- So i use Hydra EDL Cble V2 , you can buy it from aliexpress
- Be ready and open your MSM tool
- Press the cable button before connecting
- Connect the cable to your phone when you still pressing the button
- Then connect the USB to your PC
- It will automatically put your phone in EDL mode
- Now your phone will show in the MSM tool screen so you can revive it.
Thanks to everyone who tried to help.
Special thanks to Rootk1t , semdoc
Abdo Ismail said:
when I used the Fastboot Enhance tool to flash the payload.bin file, after the flash process finished I try to reboot but unfortunately it was dead.
No Fastboot, no EDL, no recovery, 3 buttons not working, power with up/down not working, when i connect to PC no sound that the pc recognize the phone "OP 8T", when I plug it into charger no info showing, Just black screen.
I don't know what should i do, please anyone help me with this problem.
Thanks in advance
Click to expand...
Click to collapse
Are you sure no EDL? Did you try the msm tool to restore to factory settings?
JedidroidX said:
Are you sure no EDL? Did you try the msm tool to restore to factory settings?
Click to expand...
Click to collapse
I'm sure, and I try MSM , the phone can't connect anymore to PC
Abdo Ismail said:
I'm sure, and I try MSM , the phone can't connect anymore to PC
Click to expand...
Click to collapse
Seem like you flashed the wrong xml for the ram type. There is one for ddr4 and ddr5. If EDL is not working I'm afraid according to several post it's an unrecoverable brick...sorry mate!!!
However keep searching for a solution, you never know maybe a new method of recovery from this disaster may exist. I'll keep searching and if I find anything I'll post it here!
Also have you tried the 3 buttons connected from charger and disconnected? Usually for some reason my phone won't respond with the 3 buttons when connected to usb sometimes.
Also have you used the msm tool before?
JedidroidX said:
Seem like you flashed the wrong xml for the ram type. There is one for ddr4 and ddr5. If EDL is not working I'm afraid according to several post it's an unrecoverable brick...sorry mate!!!
However keep searching for a solution, you never know maybe a new method of recovery from this disaster may exist. I'll keep searching and if I find anything I'll post it here!
Also have you tried the 3 buttons connected from charger and disconnected? Usually for some reason my phone won't respond with the 3 buttons when connected to usb sometimes.
Also have you used the msm tool before?
Click to expand...
Click to collapse
Thanks bro for your cooperation, yes i tried everything and yes i used MSM tool a lot of time.
i'll searh more to fix this prob, thx again
Abdo Ismail said:
Thanks bro for your cooperation, yes i tried everything and yes i used MSM tool a lot of time.
i'll searh more to fix this prob, thx again
Click to expand...
Click to collapse
Just one more thing, when you connect the phone to pc check your device manager to see if the PC reads the phone. If it does than its just a driver issue and reinstalling the qualcom driver for msm maybe needed.
I've found that sometimes I have to reinstall the Qualcomm drivers for EDL. So check that when you connect the phone to the PC in EDL mode there isn't an entry in Device Manager under Ports (COM & LPT)
JedidroidX said:
Just one more thing, when you connect the phone to pc check your device manager to see if the PC reads the phone. If it does than its just a driver issue and reinstalling the qualcom driver for msm maybe needed.
Click to expand...
Click to collapse
when I connect it to PC I can't hear the sound which appears when you connect a new device, and also no changes in the device manager unfortunately
BillGoss said:
I've found that sometimes I have to reinstall the Qualcomm drivers for EDL. So check that when you connect the phone to the PC in EDL mode there isn't an entry in Device Manager under Ports (COM & LPT)
Click to expand...
Click to collapse
I can't know which mode the phone is stuck on, because I have only a black screen, even the Power button with volume up / down not working,
do you think if I keep it for a couple of days the battery will drain and I can use MSM tool with press 2 volume buttons, it's the last thing i think about
Abdo Ismail said:
I can't know which mode the phone is stuck on, because I have only a black screen, even the Power button with volume up / down not working,
do you think if I keep it for a couple of days the battery will drain and I can use MSM tool with press 2 volume buttons, it's the last thing i think about
Click to expand...
Click to collapse
I would open it up and remove the battery instead of waiting for days but that's also an option. It's not that hard to open, I opened mines to replace the usb port. I just held the back of the bottom corners of the phone over the stove until it was hot enough to soften the glue and used an old credit card and my thumb nail to open it. It maybe unrecoverable anyway so its worth a try.
JedidroidX said:
I would open it up and remove the battery instead of waiting for days but that's also an option. It's not that hard to open, I opened mines to replace the usb port. I just held the back of the bottom corners of the phone over the stove until it was hot enough to soften the glue and used an old credit card and my thumb nail to open it. It maybe unrecoverable anyway so its worth a try.
Click to expand...
Click to collapse
yes, I thought to do that, so I keep it to be the last option, I'm still searching for any new ideas.
bro, really I want to thank you for supporting me, I appreciate that
Abdo Ismail said:
I can't know which mode the phone is stuck on, because I have only a black screen, even the Power button with volume up / down not working,
do you think if I keep it for a couple of days the battery will drain and I can use MSM tool with press 2 volume buttons, it's the last thing i think about
Click to expand...
Click to collapse
I've had a totally black screen at times in Qualcomm Crashdump Mode. To get out of it you can use Power+Vol up and then, when the phone buzzes, use the key combination for bootloader or MSM.
BillGoss said:
I've had a totally black screen at times in Qualcomm Crashdump Mode. To get out of it you can use Power+Vol up and then, when the phone buzzes, use the key combination for bootloader or MSM.
Click to expand...
Click to collapse
I tried a lot to press Volume Up + Power & Volume Down + Power & the 3 buttons, but with no response.
I can't feel any buzz, even I tried it when the phone connected to the PC, no sound come from PC prove that the phone is connected
Please keep us updated with any current queries or resolution as I'm very interested in the outcome.
Thank you!
Abdo Ismail said:
when I used the Fastboot Enhance tool to flash the payload.bin file, after the flash process finished I try to reboot but unfortunately it was dead.
No Fastboot, no EDL, no recovery, 3 buttons not working, power with up/down not working, when i connect to PC no sound that the pc recognize the phone "OP 8T", when I plug it into charger no info showing, Just black screen.
I don't know what should i do, please anyone help me with this problem.
Thanks in advance
Click to expand...
Click to collapse
Hello!
If waiting for battery to discharge will not help you, i suggest of:
- Removing the back panel by heating it.
- Unplugging battery
- Then using the EDL points on the motherboard to force the device to boot EDL.
-The device immediately will be recognised by just one tap on "enum" now.
- Plugging the battery again and attaching back panel and rebooting.
JedidroidX said:
Please keep us updated with any current queries or resolution as I'm very interested in the outcome.
Thank you!
Click to expand...
Click to collapse
sure my bro
Rootk1t said:
Hello!
If waiting for battery to discharge will not help you, i suggest of:
- Removing the back panel by heating it.
- Unplugging battery
- Then using the EDL points on the motherboard to force the device to boot EDL.
-The device immediately will be recognised by just one tap on "enum" now.
- Plugging the battery again and attaching back panel and rebooting.
Click to expand...
Click to collapse
thanks my friend for your suggestion, yes I was thinking about this solution, but I keep it to be the last one, I think I will try this method at the weekend as I'm busy with work these days.
I'll tell you after I try this solution.
Thanks for your cooperation
JedidroidX said:
Seem like you flashed the wrong xml for the ram type. There is one for ddr4 and ddr5.
Click to expand...
Click to collapse
I have the same problem now after trying to downgrade to OOS12
I used this, EU version, I cant find another version, which would have been the right one?
https://oxygenos.oneplus.net/4668_sign_KB2003_11_C_OTA_1360_all_86c2c1_01000100.zip
It installed, but now I cant start the ohone in any way.
Any tipps? Did it work for you Abdo Ismail?
SamNeuer said:
I have the same problem now after trying to downgrade to OOS12
I used this, EU version, I cant find another version, which would have been the right one?
https://oxygenos.oneplus.net/4668_sign_KB2003_11_C_OTA_1360_all_86c2c1_01000100.zip
It installed, but now I cant start the ohone in any way.
Any tipps? Did it work for you Abdo Ismail?
Click to expand...
Click to collapse
Similar case
[OP8T][OOS KB05AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
Rootk1t said:
Hello!
If waiting for battery to discharge will not help you, i suggest of:
- Removing the back panel by heating it.
- Unplugging battery
- Then using the EDL points on the motherboard to force the device to boot EDL.
-The device immediately will be recognised by just one tap on "enum" now.
- Plugging the battery again and attaching back panel and rebooting.
Click to expand...
Click to collapse
Thank you so much for this, after spending 16$ on a stupid edl cable that never worked, your guide revived my op8t I appreciate you!
Hi all!
Long story short, basically my OnePlus Nord gen 1 is bricked (no recovery, no ROM). In the current state all it is able to do is boot into the bootloader. The bootloader gives several 'options' such as "boot to recovery", and more importantly, "power off". But no matter what option I choose, the phone ends up rebooting back into the bootloader.
I've tried to follow guides on XDA instructing how to unbrick the device, to no avail. The main guide I'm trying to follow is the MSMdownloadTool guide, but that requires me to power off the device to enter EDL mode (which it isn't doing).
The device seems to be stuck in fast boot mode, but isn't using fastbootd so I can't make changes to critical partitions. Since it is stuck in fastboot mode, adb commands don't work. I've tried reflashing the recovery, but that didn't work. I've tried clearing cache but there I'm running into 'cannot generate userdata' (fastboot erase cache spat out "failed; check device logs").
As for hardware buttons, using volume down + volume up or even volume down+power does nothing, volume up + power button or holding all 3 just restarts the bootloader, and holding just the power button does nothing except for repeatedly select "start"(causing it to reboot back into bootloader).
I feel if I can just get it into EDL mode somehow, everything else will fall into place. Any help at all will be much appreciated
zeuses23 said:
Hi all!
Long story short, basically my OnePlus Nord gen 1 is bricked (no recovery, no ROM). In the current state all it is able to do is boot into the bootloader. The bootloader gives several 'options' such as "boot to recovery", and more importantly, "power off". But no matter what option I choose, the phone ends up rebooting back into the bootloader.
I've tried to follow guides on XDA instructing how to unbrick the device, to no avail. The main guide I'm trying to follow is the MSMdownloadTool guide, but that requires me to power off the device to enter EDL mode (which it isn't doing).
The device seems to be stuck in fast boot mode, but isn't using fastbootd so I can't make changes to critical partitions. Since it is stuck in fastboot mode, adb commands don't work. I've tried reflashing the recovery, but that didn't work. I've tried clearing cache but there I'm running into 'cannot generate userdata' (fastboot erase cache spat out "failed; check device logs").
As for hardware buttons, using volume down + volume up or even volume down+power does nothing, volume up + power button or holding all 3 just restarts the bootloader, and holding just the power button does nothing except for repeatedly select "start"(causing it to reboot back into bootloader).
I feel if I can just get it into EDL mode somehow, everything else will fall into place. Any help at all will be much appreciated
Click to expand...
Click to collapse
You might be able to enter EDL mode by opening the device and using a jumper to touch certain contact points on the board and force it into EDL mode. I don't know your hardware so I don't know which points to tell you to use the jumper on, you'll have to do some research to figure that out based on the specific device you have.
zeuses23 said:
The device seems to be stuck in fastboot mode, but isn't using fastbootd so I can't make changes to critical partitions.
Click to expand...
Click to collapse
unrelated. you can flash super.img from fastboot. flashing critical partitions maybe needs unlocking.
Hello if this can help my device was dead , not even fastboot or recovery was working and was bootlooping. What i did is installing MTK authentication bypass ( i dont know if your phone is mtk cpu ) , then i instaled libUsb driver that came packed with that tool.
Then you open libusb driver installer, and when you keep pressed power + vol down to enter Brom mode, it should detect a com port that disappear in few seconds, what u need to do is click install driver as soon you see that com port appear.
Now you open the bypass tool with phone disconnected, click on bypass, and then connect the cable, now enter Brom mode with power + vol down, and the tool will say Success.
Now your phone is ready to use with any flash tool ,like sptools.
Hope this helps.
Droidriven said:
You might be able to enter EDL mode by opening the device and using a jumper to touch certain contact points on the board and force it into EDL mode. I don't know your hardware so I don't know which points to tell you to use the jumper on, you'll have to do some research to figure that out based on the specific device you have.
Click to expand...
Click to collapse
Hey, thanks for the suggestion! But i would very much prefer not to open up my device. I've also heard that there is an EDL cable, but I don't know if that'll work either. Lets see
aIecxs:
unrelated. you can flash super.img from fastboot. flashing critical partitions maybe needs unlocking.
Click to expand...
Click to collapse
Thanks for your reply! A silly question, but what does super.img do? I tried flashing the critical partitions after running "fastboot oem unlock_critical", but that still gave me the error.
innergat:
Hello if this can help my device was dead , not even fastboot or recovery was working and was bootlooping. What i did is installing MTK authentication bypass ( i dont know if your phone is mtk cpu ) , then i instaled libUsb driver that came packed with that tool.
Then you open libusb driver installer, and when you keep pressed power + vol down to enter Brom mode, it should detect a com port that disappear in few seconds, what u need to do is click install driver as soon you see that com port appear.
Now you open the bypass tool with phone disconnected, click on bypass, and then connect the cable, now enter Brom mode with power + vol down, and the tool will say Success.
Now your phone is ready to use with any flash tool ,like sptools.
Hope this helps.
Click to expand...
Click to collapse
Hey innergat, unfortunately I believe my phone has a qualcomm chipset, so this probably won't work
Dynamic partitions are logical partitions hosted in physical super partition. logical partitions can only be accessed from fastbootd, physical partitions from fastboot.
To enter EDL mode try selecting power off and then immediately hold volume up + volume down.