Related
Just got a Nokia 3.1 to use a testing tool and other fun stuff, and therefore would like to root it. Does anyone of you know of a working root of the 3.1?
So this phone is a no go for root and custom roms I guess.
kaslopis said:
So this phone is a no go for root and custom roms I guess.
Click to expand...
Click to collapse
Why do you think so? Bootloader can be unlocked via Developer settings, and I think there is no special magic preventing this device from rooting.
I would try rooting it by flashing some SuperSU zips or something like that, but I didn't try it yet
Has anyone checked this out? I haven't purchased a Nokia 3.1 but am considering it. I went so far as to create a Nokia account and there is a bootloader unlock apk, as well as an unlock.key that can be downloaded, and there are clear instructions on the Nokia page itself.. Since I don't have the phone, I did not attempt to proceed. However, if the 3.1 qualifies (I don't see why it wouldn't) then getting root should be as easy as following Magisk instructions.
There is even a page for the open source releases.
If I were to get the 3.1, my main objective would likely be to just obtain root. Looks like it should be doable.
Edit - well over 100 views since I posted this but no one has tried to unlock and/or root. I thought that was the purpose of this thread.
Unfortunately that app always crashes
VidarPT said:
Unfortunately that app always crashes
Click to expand...
Click to collapse
That is unfortunate! Perhaps, does activating Developer Options allow to select OEM Unlocking and USB Debuging, then running the Unlocking App? To run step 5 of 5 (see NOKIA INSTRUCTIONS below) you would need to have USB Debugging enabled anyway. Nowhere in the instructions is that mentioned.
FYI - Activate Developer Options: Go to Settings>About Phone and tap Build Number 7 times. Back out to access Developer Options.
Also, I do not have this phone but am interested in it. I cannot confirm if any of the advice I am giving will work, but it is what I would try.
NOKIA INSTRUCTIONS
Introduction
Firstly, we need to validate that the phone you would like to unlock is operated by you. There are a few steps to this, so we ask that you carefully follow all instructions. Let’s get started.
To participate, simply complete the following steps:
1. Please download the Nokia Bootloader Unlocker app. You can download the apk from this link and install the apk on your device. If you don’t understand how to install an apk on your device, please do not unlock the bootloader on your device. Doing so will void your phone's warranty and may cause irreparable damage.
2. Launch the Nokia Bootloader Unlocker app and fill your email information and click “Submit”.
3. The app will display a code. Please enter this in the form below along with your email address. Then press "Request to Unlock"
Your bootloader can now be unlocked. Follow the instructions below:
Step 1/5
Check the email you entered during registration. You should receive an email with a message as follows:
Hi, Thanks for requesting the unlocking bootloader. Please download your unlock key from the following link. xxxxxxxxxxxxxxxxxxxxxxxxxx
Download the unlock key and save it as “unlock.key”.
Step 2/5
Power off your device. Once powered off, press and hold the Volume Down button.
Step 3/5
While keeping the Volume Down button pressed, connect the device to the computer via USB cable. The device will boot into “Download mode”. If you have difficulty, try powering up normally, power off the device again and start back from Step 1.
Step 4/5
Download the following fastboot binary for your OS here.
Step 5/5
Open a command prompt:
Windows: Start > cmd
Mac: Applications > Utilities > Terminal.app
Linux: Terminal
Navigate to the directory where the previously downloaded unlock.key file is saved. Then enter the following commands:
fastboot flash unlock unlock.key
fastboot oem unlock
If successful, you should see the below message:
Unlock success!
Then reboot the device by entering the following command:
fastboot reboot
You are done!
It doesn't work either way. I tried with both those options enabled and disabled but the program always crashes. It's interesting to note that the app itself fails to install through chrome or "Files" app. Gives an error saying "Can't open app". I only managed to install it through ES File Explorer. Could it be because of I bought the phone on a Vodafone store? I can't find the original stock rom to flash, sadly.
VidarPT said:
It doesn't work either way. I tried with both those options enabled and disabled but the program always crashes. It's interesting to note that the app itself fails to install through chrome or "Files" app. Gives an error saying "Can't open app". I only managed to install it through ES File Explorer. Could it be because of I bought the phone on a Vodafone store? I can't find the original stock rom to flash, sadly.
Click to expand...
Click to collapse
I have been researching this and have found that, as of this writing, only the Nokia 8 qualifies for bootloader unlocking. See here. The only thing holding me back from jumping on this Nokia 3.1 is the inability to unlock the bootloader (and maybe the lack of fingerprint sensor.) Hopefully it gets "approved soon".
Currently the oem unlock using the Nokia bootloader unlock only works for Nokia 8
is there a way to root the 3.1 yet successfully? im a noob at this stuff and don't want to screw my phone.
snarfydog said:
is there a way to root the 3.1 yet successfully? im a noob at this stuff and don't want to screw my phone.
Click to expand...
Click to collapse
No, not until Nokia decides to allow users to unlock bootloader.
What about the 3.1 plus. I've already unlocked OEM. I just started looking, thought I'd start here first.
XSHADOW3 said:
What about the 3.1 plus. I've already unlocked OEM. I just started looking, thought I'd start here first.
Click to expand...
Click to collapse
It doesn't matter if you have enabled "OEM unlocking" option in Developer settings, currently Nokia doesn't allow unlocking of bootloader and thus rooting device, unless you are Nokia 8 user. You can try this, but it will crash almost for sure.
As far as I can tell, my bootloader is unlocked. I am a noob of course, but I have been researching this topic for a couple of months now. I could be mistaken in thinking "upload" mode is it, but I can't seem to figure out the difference. Otherwise, I don't know what to do next.
Nightseer said:
As far as I can tell, my bootloader is unlocked. I am a noob of course, but I have been researching this topic for a couple of months now. I could be mistaken in thinking "upload" mode is it, but I can't seem to figure out the difference. Otherwise, I don't know what to do next.
Click to expand...
Click to collapse
Can you please tell what did you do exactly?
MilesSeventh said:
Can you please tell what did you do exactly?
Click to expand...
Click to collapse
To get to "Upload" mode? Assuming it's the same for the 3.1 Plus-maybe I should have specified that-holding power button and volume up during startup will open "Upload" mode.
You can also use adb with the command "reboot bootloader." For that reason, I think it's the bootloader, but I could be wrong.
Sorry if I was a bit misleading and it is totally different on the Nokia 3.1, I was just some kinda hopeful to actually see people talk about it.
Let's get her done
Nightseer said:
To get to "Upload" mode? Assuming it's the same for the 3.1 Plus-maybe I should have specified that-holding power button and volume up during startup will open "Upload" mode.
You can also use adb with the command "reboot bootloader." For that reason, I think it's the bootloader, but I could be wrong.
Sorry if I was a bit misleading and it is totally different on the Nokia 3.1, I was just some kinda hopeful to actually see people talk about it.
Click to expand...
Click to collapse
I'm not bringing any sizable programming skills to the table unless somebody wants to teach me real fast.
Hopefully, I bring tidings of great joy. So I got two these Nokia's and they're both locked. to the carrier, Cricket. I suspect they are at least unlawfully locked. . My understanding is you can't lock to used phone especially if it's been sold as a prepaid phone. I believe this falls under the reseller flex policy. I bought it off of eBay from a guy that sells nothing but phones and he's been extremely cagey about what he'll admit to, so I called the carrier. I literally waited an hour and a half on the phone because I am falling asleep and I was on a computer speaker phone so it kept on the time of the call. I only held that long because I had fallen asleep. Anyway since I'm not in a cricket or AT&T customer then don't plan to eitherbe they could care less about me it actually told me they didn't have any information on the phone after I gave them the IMEI number.
My guess is the fcc's not going to do much because it's a trump Administration. So I spent about 45 minutes on the phone with Nokia and well at least they're interesting I think Microsoft paid between 7 and 12 billion to acquire them I recently sold them off for like a box of jujyfruits. Anyway they're committed to customer service so I figure my predicament might give me an in there.
So those unlock codes that it was a link earlier in the post for that's just to unlock the bootloader, right? You know this is a pretty decent phone for a low-end guy I got the newer 3.1 C it's got Cricket's bootloader in bloatware on it,
takes up a ton of space.
I mean it probably won't happen but if Nokia ever goes public again - I think the acquiring companies. Their eye on the prize and they're going to kick some ass. So I'm all in on this let's get this done. If you want I can see what I can do about asking Nokia 4 whatever it's going to take just to keep me a satisfied customer since they know Cricket/ATT isn't following the Obama regs.
Oof... It would be beautiful if Nokia customer support could guide us onto rooting this phone.
its so simple to unlock oem on nokia 3.1 plus. no third app needed. after developer option on -> go to developer option setting -> there is toggle button to on/off developer option , just use that toggle to off it and on it -> press yes for on dev options -> and select oem unlock. that all
It is pretty straightforward once you have unlocked bootloader (not by Nokia). If you want, you can simply dump boot_a or boot_b with SPflash tool, patch in Magisk app, and reflash.
Otherwise you can use my TWRP (NO TOUCH, and has disabled dm-verity). Please note it's only working on build v3.180, updates not supported - as it was only needed for my project.
https://forum.xda-developers.com/no...m-kali-nethunter-nokia-3-1-android-9-t4157681
I can't find anything definitive about whether it's rootable or not
Same here i tried every root app possible and failed.
just unlock bootloader and flash twrp
after that flash latest magisk zip hope it will work
Bhanu8082 said:
just unlock bootloader and flash twrp
after that flash latest magisk zip hope it will work
Click to expand...
Click to collapse
No need to flash TWRP: Booting into it is sufficient.
Bhanu8082 said:
just unlock bootloader and flash twrp
after that flash latest magisk zip hope it will work
Click to expand...
Click to collapse
How did you unlock the bootloader?
sCriptKittY1987 said:
How did you unlock the bootloader?
Click to expand...
Click to collapse
simple , go to about phone and try to find build number,
after you find build number tap on it until it says you are in developer mode
after that head on to developer option (it may be inside about phone section or above about phone section) turn on the option which says allow oem unlock. then,
just reboot to recovery mode either by pressing volume up or volume down key with power button.
after you enter recovery connect usb cable and open command prompt in pc and make sure that lg device drivers are installed on your pc also make sure you have adb and fastboot installed.
ok, after all this type command
adb devices
if any thing shows us then you have successfully connected your device.
after it type
adb reboot bootloader
then your mobile should restart and show fastboot mode in screen
type command
fastboot oem unlock
and done your bootloader is unlocked.
Bhanu8082 said:
just unlock bootloader and flash twrp
after that flash latest magisk zip hope it will work
Click to expand...
Click to collapse
Where did you find a tarp img for the LG k51?
sCriptKittY1987 said:
Where did you find a tarp img for the LG k51?
Click to expand...
Click to collapse
tarp image????? just follow the tutorial.
I meant TWRP recovery . After you've unlocked the bootloader where did you get a custom recovery to flash for the LG k51. From what I saw on Team Wins website, there isn't one.
Bhanu8082 said:
simple , go to about phone and try to find build number,
after you find build number tap on it until it says you are in developer mode
after that head on to developer option (it may be inside about phone section or above about phone section) turn on the option which says allow oem unlock. then,
just reboot to recovery mode either by pressing volume up or volume down key with power button.
after you enter recovery connect usb cable and open command prompt in pc and make sure that lg device drivers are installed on your pc also make sure you have adb and fastboot installed.
ok, after all this type command
adb devices
if any thing shows us then you have successfully connected your device.
after it type
adb reboot bootloader
then your mobile should restart and show fastboot mode in screen
type command
fastboot oem unlock
and done your bootloader is unlocked.
Click to expand...
Click to collapse
When I typed fastboot oem unlock I get a reply saying <waiting for any device>
sCriptKittY1987 said:
When I typed fastboot oem unlock I get a reply saying <waiting for any device>
Click to expand...
Click to collapse
I doubt that's going to work, but let me know if it does. Carriers and manufacturers use a variety of sophisticated security schemes like requiring lengthy codes that only they can provide, etc to purposely make it very difficult to unlock bootloaders. Tmobile gave me a K51 for free. They apparently feel the have to pay for it by spying on me. I bought a moto g7 plus unlocked for $117 directly from Moto and put Lineage on it, no gapps Would love to use thie k51 though if anyone figures it out because it's more waterproof and bigger battery.
mgsgta3 said:
I can't find anything definitive about whether it's rootable or not
Click to expand...
Click to collapse
Whether device's bootloader is unlockable / device's Android is root-able or not you easily can find out by means of ABB:
Code:
adb shell "getprop ro.oem_unlock_supported"
If returned value is 1, then it's supported otherwise it's not.
sCriptKittY1987 said:
Where did you find a tarp img for the LG k51?
Click to expand...
Click to collapse
and let me guess my doofus luck im guessing no way to unlock it with out a P.C. like nuttin at all?
Absolutely no of the crap above works at all in any capacity especially sprint. Generic postings like hold volume down and power also doesn't work to go into fastboot so if you guys are following the advice of some of these guys don't because you'll drop more money on a new phone then you will unlocking it some variants verizon is one I think you have to call LG I know I spent 6 hrs on the phone with "tech support" aka "jokes with a screen to read from" to FINALLY get into touch with an engineer who told me the only way "NOW" to unlocked the bootloader is in his office which means it has to be depot to be unlocked which as of this moment lg is not doing that WILL change in the future that was 12/03/2020. Even running external adb with kali linux to hack it broke the bootloader and sends you into an infinite reboot loop
jwoegerbauer said:
Whether device's bootloader is unlockable / device's Android is root-able or not you easily can find out by means of ABB:
Code:
adb shell "getprop ro.oem_unlock_supported"
If returned value is 1, then it's supported otherwise it's not.
Click to expand...
Click to collapse
This returns no value on a locked bootloader because even with Dev. Opt. Enables its still read only until bootloader is unlocked this is verified on two carriers k51's sprint and att. However it is unlockable we haven't found it and/or LG has not added this service to their site which is where you will get the info needed for the unlocked.
Oh my. You know you need to do all this from a computer, right? Can't do it in an Android terminal because fastboot commands are only valid in a phone's bootloader environment. And if you didnt know that then rooting and all of the dangers that come with it just isnt for you. But yes, it's rootable. So here you go anyway.
Reboot the phone to download mode.
Install LG's K51 usb drivers, and install adb and fastboot, on your computer.
Open a command prompt and type: fastboot oem unlock
If it does anything other than pat you on the back and tell you it's proud of you and how well you follow instructions, then go back and follow the effing instructions.
Otherwise, type: fastboot reboot.
Download magisk manager.
Do the magisk manager.
Use the LG flash tool on your computer to flash what you just did when you did the magisk manager.
And presto, you're rooted. Or I successfully left out enough info and you dont know how to use Google, leaving your device still not rooted. And thank god for that.
Ive been learning from xda for some time now. Bricked a few phones in my learning curve and tonight i had my first success with my g7, and wrighting this on my new k51. This is my first post and I think that was pretty rude of you to say. This is supposed to be a place to learn, share knowledge, and help those who are less educated. Not look down on people and say crap like that. If he wants to learn even if it takes a couple bricked phones to do it, let him. Either give him the proper procedures or dont say nothing at all. How long did it take you? How many phones? Its taking me quit a while but i am finaly getting somewhere. Keep with it guy. Dont let this dude, or any one else for that matter, bring you down.
Kenwoodquality69 said:
Ive been learning from xda for some time now. Bricked a few phones in my learning curve and tonight i had my first success with my g7, and wrighting this on my new k51. This is my first post and I think that was pretty rude of you to say. This is supposed to be a place to learn, share knowledge, and help those who are less educated. Not look down on people and say crap like that. If he wants to learn even if it takes a couple bricked phones to do it, let him. Either give him the proper procedures or dont say nothing at all. How long did it take you? How many phones? Its taking me quit a while but i am finaly getting somewhere. Keep with it guy. Dont let this dude, or any one else for that matter, bring you down.
Click to expand...
Click to collapse
Yo Ken,
So your K51 rooted?
If so, maybe you could provide a step by step?
I haven't done this yet but is it verified working? I did a google search came across the method to do the unlocking but it showed it was a failed project?
TexasPride said:
I haven't done this yet but is it verified working? I did a google search came across the method to do the unlocking but it showed it was a failed project?
Click to expand...
Click to collapse
O lord i hope this isnt true
So you got the Edge S and want GApps? Basically you unlock your bootloader, root with Magisk, then install MagiskGApps.
DISCLAIMER: UNLOCKING YOUR BOOTLOADER MAY VOID YOUR WARRANTY, AND DOING ALL THESE THINGS IN THIS GUIDE MAY RESULT IN DAMAGE/BRICKING YOUR PHONE. I AM NOT RESPONSIBLE FOR ANYTHING YOU DO TO YOUR PHONE. PROCEED AT YOUR OWN RISK.
1. Unlock the bootloader: that should be doable with their global bootloader unlock website here.
2. Download Lenovo Motoroa Smart Assistant (Rescue and Smart Assistant), and follow its instructions to "rescue" your device. It will lead you to boot into bootloader mode and download the firmware. Find the firmware file via the LMSA's downloads (should have a "show folder" button). You'll need the boot.img file for Magisk.
3. Download Magisk, then follow its instructions. You'll have to copy the boot.img to your device, then use Magisk to patch the boot file, then copy the modified one to your PC.
4. You'll need fastboot. If you don't have it already, you can download the Android SDK platform tools here. Then go into the folder, Shift+Right Click the folder, then "Open Command Prompt" or "Open PowerShell," you should have something close to one of those two. Copy your Magisk modified .img file to that folder, then you'll want to input:
fastboot flash boot [modified .img file]
Once that completes, you should see in large text, "Start" on your phone next to the power button. Press the power button, and it should boot, and you should have root now.
5. Download MagiskGApps to your phone, open Magisk on your phone, click the button that looks like a puzzle piece at the bottom of the screen, "Modules." Click "Install from storage," locate the MagiskGApps file, and install it. After that it will ask you to restart your phone, do that, then you'll just have to be patient as it takes time once its restarted to load everything. You also may need to update some or all of the apps, then you should be able to use the notification to finish setting up the phone with Google Setup.
Thanks to Motorola for making it easy to unlock their bootloaders
Thanks to the whole Magisk team for making an easy, awesome root (and more!)
Thanks to Wacko1805 (and team?) for making MagiskGApps. This is really awesome.
unlock the BL and get root is will make some apps fingerprint and face ID fail?
kimker said:
unlock the BL and get root is will make some apps fingerprint and face ID fail?
Click to expand...
Click to collapse
Magisk has a "Magisk Hide" which will allow it to pass SafetyNet, and most things which check on device security will think the device is secure. But unlocking BL and rooting does make the device less secure, and therefore incurs its own risks apart from bricking or damaging the device.
HopelesRomantc91 said:
Magisk has a "Magisk Hide" which will allow it to pass SafetyNet, and most things which check on device security will think the device is secure. But unlocking BL and rooting does make the device less secure, and therefore incurs its own risks apart from bricking or damaging the device.
Click to expand...
Click to collapse
yes, i knew the unlock and root will take risk.. but not sure is Payment business apps using fingerprint will work normal.
kimker said:
yes, i knew the unlock and root will take risk.. but not sure is Payment business apps using fingerprint will work normal.
Click to expand...
Click to collapse
Google Pay works. But according to the Motorola website you should be able to relock the bootloader if yours doesn't work. But there's never any guarantee. If you need your device secure, recommend don't unlock bl or root, or wait to see if there's a root option without bootloader unlock that can be easily undone.
HopelesRomantc91 said:
Google Pay works. But according to the Motorola website you should be able to relock the bootloader if yours doesn't work. But there's never any guarantee. If you need your device secure, recommend don't unlock bl or root, or wait to see if there's a root option without bootloader unlock that can be easily undone.
Click to expand...
Click to collapse
I saw that someone’s edge s had unlocked the BL and Flash G100 firmware and everything worked normally, and then tried to lock the BL again, but it was unsuccessful and the system could not start. The flashing tool does not recognize the machine.
kimker said:
I saw that someone’s edge s had unlocked the BL and Flash G100 firmware and everything worked normally, and then tried to lock the BL again, but it was unsuccessful and the system could not start. The flashing tool does not recognize the machine.
Click to expand...
Click to collapse
That's not good. Hopefully they can restore it back somehow. With this guide to unlock and flash gapps why would you need to flash G100 though? This seems to be itright now without one of rom developer's releases to get root & apps. For me this is all i would look for. Titanium backup on it and restore.. done until PE rom comes out.
kimker said:
I saw that someone’s edge s had unlocked the BL and Flash G100 firmware and everything worked normally, and then tried to lock the BL again, but it was unsuccessful and the system could not start. The flashing tool does not recognize the machine.
Click to expand...
Click to collapse
I would think yes, if you flash different firmware, locking the BL would likely cause problems. It's very difficult to do anything w/o unlocked bootloader, except sometimes rooting is doable. That's pretty much the behavior I expect. If they come to this subforum, we might be able to help.
HopelesRomantc91 said:
I would think yes, if you flash different firmware, locking the BL would likely cause problems. It's very difficult to do anything w/o unlocked bootloader, except sometimes rooting is doable. That's pretty much the behavior I expect. If they come to this subforum, we might be able to help.
Click to expand...
Click to collapse
thank you. They did not ask for help. It seems that the lock BL is a self-verification switch, and then performs a verification system integrity.
HopelesRomantc91 said:
I would think yes, if you flash different firmware, locking the BL would likely cause problems. It's very difficult to do anything w/o unlocked bootloader, except sometimes rooting is doable. That's pretty much the behavior I expect. If they come to this subforum, we might be able to help.
Click to expand...
Click to collapse
I'm curious,If you unlock and flash other firmware and then flash back to the original firmware, can it be locked again?
Mine doesn't let me unlock its BL. I've got unlock code from moto and did a factory reset with SIM card in slot 1. After enabling developer mode and debugging the switch still is greyed out. So no chance to unlock it.
Has anyone got an idea what to try now?
Moto support answered yesterday to my request but also no solution since I told them that it doesn't work
Device is not branded. I got it from Amazon so no provider branding.
If this won't be able to be unlocked and rooted I'll have to return it and switch to a Google Pixel.
kischde said:
Mine doesn't let me unlock its BL. I've got unlock code from moto and did a factory reset with SIM card in slot 1. After enabling developer mode and debugging the switch still is greyed out. So no chance to unlock it.
Has anyone got an idea what to try now?
Moto support answered yesterday to my request but also no solution since I told them that it doesn't work
Device is not branded. I got it from Amazon so no provider branding.
If this won't be able to be unlocked and rooted I'll have to return it and switch to a Google Pixel.
Click to expand...
Click to collapse
I had the same issue, you need to factory reset WITH your sim card in the phone, this will let you open the OEM unlock slide thing in the dev mode.
Then once its done you can fastboot and unlock the bootloader.
I did so, maybe I explained not so well. SIM was inserted and then I did factory reset by starting it from settings. After restart it's still the same - switch / unlock slider greyed out.
kischde said:
I did so, maybe I explained not so well. SIM was inserted and then I did factory reset by starting it from settings. After restart it's still the same - switch / unlock slider greyed out.
Click to expand...
Click to collapse
On my OG Pixel XL, I had to wait 7 days for the slider to become normal. By the time I got around to do it on the Edge S it was about the same time.... could be related
Now as you said that I remember that thingy with another device. Maybe a Xiaomi I think... With that I had to wait several days until the unlock code was delivered.
But there was a message, too, when trying to get it sooner, which said you needed to wait some more time.
Not sure if it's the the same for Moto devices? Then again, when thinking that you experienced the same with a Pixel, too...
Did anyone else make such an experience with his/her g100?
kischde said:
Now as you said that I remember that thingy with another device. Maybe a Xiaomi I think... With that I had to wait several days until the unlock code was delivered.
But there was a message, too, when trying to get it sooner, which said you needed to wait some more time.
Not sure if it's the the same for Moto devices? Then again, when thinking that you experienced the same with a Pixel, too...
Did anyone else make such an experience with his/her g100?
Click to expand...
Click to collapse
Make sure your on the latest OTA, Lenovo made a mistake on previous versions with the OEM Unlocking function not being enabled. They fixed it in latest ota.
RSA tool said the file I uploaded yesterday is the latest one available (and it's exactly the same as the installed version).
The device was released just a few days ago in Europe. Perhaps they fixed the unlock switch in other regions and still need to fix it in Europe..
Will wait until weekend if they come up with a solution. If not I'm afraid I have to return the device as I need it personally AND professionally, too - I'm field agent, so.... :/
HopelesRomantc91 said:
I would think yes, if you flash different firmware, locking the BL would likely cause problems. It's very difficult to do anything w/o unlocked bootloader, except sometimes rooting is doable. That's pretty much the behavior I expect. If they come to this subforum, we might be able to help.
Click to expand...
Click to collapse
The poor guy whose phone turned bricks went to the after-sales department of moto, and the answer was that he needed to replace the phone motherboard. .
kimker said:
The poor guy whose phone turned bricks went to the after-sales department of moto, and the answer was that he needed to replace the phone motherboard. .
Click to expand...
Click to collapse
Ouch...
kimker said:
I'm curious,If you unlock and flash other firmware and then flash back to the original firmware, can it be locked again?
Click to expand...
Click to collapse
I would assume so, but I don't really know why anyone would want to relock.
DO NOT LOCK THE BOOTLOADER WHILE ROOTED!
When locking the bootloader while rooted, the boot image will fail verification and the system will fail to boot. You cannot flash a stock boot image with a locked bootloader.
Locking the bootloader will not fix most issues. It will allow you to use apps that check for an unlocked bootloader without the need for any additional modification. That is the ONLY benefit.
If you still want to lock your bootloader, make sure you can say yes to each of the following:
1. Have you restored the stock boot.img / vendor_boot.img and the phone functions normally?
Spoiler: Restore Stock Boot
Boot / DTBO Images [Root / Stock] - 5 / Pro / Ultimate (NOT S)
These images are NOT built from source. These are the stock images from the firmware provided by Asus that are extracted with payload dumper and uploaded without modification. 18.0840.2202.231 18.0840.2201.226 18.0840.2112.211...
forum.xda-developers.com
Follow the instructions in the thread above.
Use only the boot and vendor_boot images.
Do NOT flash any images that end with "-magisk.img"
2. Have you made a backup of everything you do not want to lose when wiping the phone?
Spoiler: Make a Backup
The sdcard is part of the internal storage and is cleared by a factory reset
Copy everything you want to keep to a computer or USB-C storage device
Apps and settings can be backed up by enabling the Google Backup option
Open Settings
Select Google
Select Backup
Select Back up now
Wait for the backup to complete
3. Have you flashed raw firmware and made sure the phone and updates function normally?
Spoiler: Flash Raw Firmware
RAW Firmware Collection and Guide
All fastboot / adb commands require using the side USB-C port https://developer.android.com/studio/releases/platform-tools.html#download Make sure you have fastboot installed Add platform tools to PATH (post 2) Make a backup of anything...
forum.xda-developers.com
Follow the instructions in the thread above.
If you perform a wipe, you may skip step 4.
4. Have you performed a factory reset and made sure the phone functions normally?
Spoiler: Factory Reset
Open Settings
Select System
Select Reset options
Select Erase all data (factory reset)
Follow the instructions
Once you have verified all of the above requirements, you are now ready to lock the bootloader.
Spoiler: Lock Bootloader
From the bootloader (volume up + power):
Code:
fastboot oem asus-csc_lk
Reserved for QA information
I don't want to spread false information here, but here is a question post I created recently with two replies showing me contacting the help center (two different agents) confirming that I can use the app more than once to unlock the device's bootloader: https://forum.xda-developers.com/t/...nlock-relock-for-asus-rog-phone-5-5s.4367047/ . @Andrologic also confirms the case there for global (EU) version. I have a feeling that for the Tencent version it is because the sellers lock it on a wrong official ROM, or wrong ROM in general, e.g. global ROM, and therefore it confuses the unlock app. I am surprised the device did not even get hard bricked from locking on not the original ROM. By the way, I have contacted the help center of the US store, but I have a feeling it should work on the global (EU) version as well.
falhumai96 said:
I don't want to spread false information here, but here is a question post I created recently with two replies showing me contacting the help center (two different agents) confirming that I can use the app more than once to unlock the device's bootloader: https://forum.xda-developers.com/t/...nlock-relock-for-asus-rog-phone-5-5s.4367047/ . @Andrologic also confirms the case there for global (EU) version. I have a feeling that for the Tencent version it is because the sellers lock it on a wrong official ROM, or wrong ROM in general, e.g. global ROM, and therefore it confuses the unlock app. I am surprised the device did not even get hard bricked from locking on not the original ROM. By the way, I have contacted the help center of the US store, but I have a feeling it should work on the global (EU) version as well.
Click to expand...
Click to collapse
Based on new information, it does seem possible to repair the issues caused by converting.
That said, this guide is still quite relevant. After all, most of the issues people were having were caused by unlocking the bootloader, converting, rooting, and locking the bootloader. The warning for possibility of not being able to unlock have been removed, but the info about restoring to stock before locking has been left.
I send mine in for a motherboard repair I was rooted and everything I unrooted installed stock firmware and locked the bootloader again once I got the phone back I unlocked the bootloader once again and I am rooted again
chairman011 said:
I send mine in for a motherboard repair I was rooted and everything I unrooted installed stock firmware and locked the bootloader again once I got the phone back I unlocked the bootloader once again and I am rooted again
Click to expand...
Click to collapse
@chairman011 what variant of the phone it is (e.g. CN or WW or US, ...etc.)? Also, when they returned it to you and you were able to unlock it again, was it on the original firmware (or any version in its lineage (i.e. not a ROM that's not original))?
If by using ASUS unlock utility one was able to oneself unlock the boot-loader once, then is it safe to say that (after relocking it) it'd be possible to unlock it again?
nexusnerdgeek said:
If by using ASUS unlock utility one was able to oneself unlock the boot-loader once, then is it safe to say that (after relocking it) it'd be possible to unlock it again?
Click to expand...
Click to collapse
Some people have reported that you can't unlock the bootloader again after relocking, using the official "Unlock Device App", but I suspect it is an OS mismatch. This issue has only been observed on Tencent (CN) version with global ROM. Have anyone been able to unlock->relock->unlock on the same version of the phone, but not relocking while on the global ROM (i.e. relocking while on stock CN ROM)?
I am surprised the phone did not hard brick. Usually, and this is a general case in almost all Android phones with bootloader unlock capability, when you relock on a different ROM your phone hard bricks. Always restore to original ROM before relocking. Can people with Tencent (CN) phones with global ROM and locked bootloader flash the original CN ROM without unlocking the bootloader? If so, can you test the "Unlock Device App" to see if it works while on the CN (official) ROM? I gotta a feeling it might work in that situation.
falhumai96 said:
Some people have reported that you can't unlock the bootloader again after relocking, using the official "Unlock Device App", but I suspect it is an OS mismatch. This issue has only been observed on Tencent (CN) version with global ROM. Have anyone been able to unlock->relock->unlock on the same version of the phone, but not relocking while on the global ROM (i.e. relocking while on stock CN ROM)?
I am surprised the phone did not hard brick. Usually, and this is a general case in almost all Android phones with bootloader unlock capability, when you relock on a different ROM your phone hard bricks. Always restore to original ROM before relocking. Can people with Tencent (CN) phones with global ROM and locked bootloader flash the original CN ROM without unlocking the bootloader? If so, can you test the "Unlock Device App" to see if it works while on the CN (official) ROM? I gotta a feeling it might work in that situation.
Click to expand...
Click to collapse
It's an identification mismatch. It's similar to when you throw your SIM card in a different phone and your carrier lists you as having a different phone. Based on the information that has been discovered, it would appear that CN to WW conversions were wiping out the stuff that makes your device your device.
twistedumbrella said:
It's an identification mismatch. It's similar to when you throw your SIM card in a different phone and your carrier lists you as having a different phone. Based on the information that has been discovered, it would appear that CN to WW conversions were wiping out the stuff that makes your device your device.
Click to expand...
Click to collapse
So, basically the bootloader unlock for tencent devices will always locked unless asus uodate their unlock app or has their been another way around it yet?
The unlock app should unlock the bootloader at least once. Unlocking it a second time has mixed results.
Hi there, can you guys help me? I'm one of those unlucky ones who got my phone corrupted and won't boot anymore due to the boot loader. is there a way to fix this?? I've got an ROG phone 5s 16/512 on android12.
Hope you guys can help me! I know you guys have amazing brain cells than me when it comes to these things lol
Oh! and my rog is not the china version thanks
0v3rkill said:
Hi there, can you guys help me? I'm one of those unlucky ones who got my phone corrupted and won't boot anymore due to the boot loader. is there a way to fix this?? I've got an ROG phone 5s 16/512 on android12.
Hope you guys can help me! I know you guys have amazing brain cells than me when it comes to these things lol
Oh! and my rog is not the china version thanks
Click to expand...
Click to collapse
TYou should be able to RAW flash yourself out of it if a factory reset doesn't work. This does happen when re-locking the WW.
Andrologic said:
TYou should be able to RAW flash yourself out of it if a factory reset doesn't work. This does happen when re-locking the WW.
Click to expand...
Click to collapse
Hi there mate, thanks heaps for taking time.on my post. how do i do that? can you send me a link of the step by step guide? again thanks
0v3rkill said:
Hi there mate, thanks heaps for taking time.on my post. how do i do that? can you send me a link of the step by step guide? again thanks
Click to expand...
Click to collapse
Below post from the help guide (credits to the contributors) has links to RAW firmware packages. You just need any one of the WW packages. Download it and with your device in bootloader mode, run one of the .bat flash scripts that you'll find in the RAW package. The version doesn't matter, you can simply update to the latest firmware once you're back up.
RAW Firmware Collection and Guide
All fastboot / adb commands require using the side USB-C port https://developer.android.com/studio/releases/platform-tools.html#download Make sure you have fastboot installed Add platform tools to PATH (post 2) Make a backup of anything...
forum.xda-developers.com
Andrologic said:
Below post from the help guide (credits to the contributors) has links to RAW firmware packages. You just need any one of the WW packages. Download it and with your device in bootloader mode, run one of the .bat flash scripts that you'll find in the RAW package. The version doesn't matter, you can simply update to the latest firmware once you're back up.
RAW Firmware Collection and Guide
All fastboot / adb commands require using the side USB-C port https://developer.android.com/studio/releases/platform-tools.html#download Make sure you have fastboot installed Add platform tools to PATH (post 2) Make a backup of anything...
forum.xda-developers.com
Click to expand...
Click to collapse
Hi there, I did follow and did the raw setup it did got me through the boot loop. However, its stuck on the system start up updating screen and stays in 0%.
Darn i thought im already dead! i didn't even know how i fixed it hahahaha! but its working now successfully downgraded to android 11 because its the only firmware i found and managed to make it work again combination of alot of research in google and here xda. working 100% imei two of them, finger print and sn are all intact. thanks guys
For these few reasons I have to give up root & lock the boot-loader: 1. Financial apps stop working from time to time causing much grief; 2. I've used root functionality precisely for nothing for a year I've had it; 3. It was getting all too complicated to keep up with it all.
(The original intention for unlocking/rooting was to get some sort of unofficial VoLTE and VoWiFi for the mobile operator of my choice; however, it didn't help. Then a newer firmware implemented VoLTE and VoWiFi! So my impatience, admittedly couldn't be known at that point in time, backfired.)
I've nothing to preserve on the phone, due to having a Moto G 5G backup phone. I only had it working with adb & fastboot in my Linux laptop (up to date Fedora 36). I had no working Windows laptop then. But I do now. However, adb on Windows says the device is "unauthorised" (as expected); fastboot in it doesn't list the device. So I might be limited to my Linux laptop only. The phone was previously working on the last A11 WW firmware fine.
I've tried to follow the steps from the original post of this thread. First one worked with vendor_boot, dtbo & boot images (used only 18.0840.2202.231 versions of them). Second N/A. With third step, flash_raw_and_wipe_data.sh fails by core dumping.
Right now, the phone boots to fastbootd & not further. Any help is much appreciated.
(I think I'm inching towards fully bricking this phone. I'm not there yet, but getting closer . It'd be nice to get it working again without root & with locked boot loader. Any help is much appreciated.)
This is where I'm at while executing step 3 of the initial guide in this post:
When powered on, in the usual boot loader unlocked warning page, it prompts for power key to be pressed to continue.
(Here if power switch is not pressed within 30 odd seconds, phone powers down automatically.)
Once power key is pressed, it lands in boot loader. Selecting Start, it goes back to boot loader. I think this is called a boot loop.
While in boot loader, selecting "Recovery mode", it progresses to "Android Recovery". Here selecting "Enter fastboot" appears to take it furthest in the booting process of landing at "Android Fastboot".
(The version info showed in Fastboot -- 18.0840.2202.231-0 -- matches with the last A11 update I downloaded from Asus website & had it installed late March this year.)
I don't think it can boot any further at the state that it's in now.
I think this is where it needs a raw firmware to be flashed. This step keeps core-dumping in my Linux laptop when trying to use WW_ZS673KS_18.0840.2106.83_M3.13.24.40-ASUS_1.1.92_Phone-user.raw file that was linked in the original post. This version appears to be quite old. Could the version mismatch between what the phone was running recently (18.0840.2202.231) and the raw file (18.0840.2106.83) cause the core-dump issue? IOW, would somebody have a link for 18.0840.2202.231 raw file please?
I couldn't use my work Windows laptop due to an issue I cannot overcome (installation of driver needed for the phone is somehow blocked in it). So, soon I'll try it from a personal Windows laptop of my neighbor. Let's see if it can progress any further with the help of Windows platform.
In the meantime, I can appreciate to be informed about any tips and tricks such as if this is something that the phone cannot be recovered from. Or even somebody highly skilled would like to help me to achieve a fully functional phone (with bootloader locked please) for a fair compensation. Please let me know. Thanks for any guidance.
nexusnerdgeek said:
This is where I'm at while executing step 3 of the initial guide in this post:
When powered on, in the usual boot loader unlocked warning page, it prompts for power key to be pressed to continue.
(Here if power switch is not pressed within 30 odd seconds, phone powers down automatically.)
Once power key is pressed, it lands in boot loader. Selecting Start, it goes back to boot loader. I think this is called a boot loop.
While in boot loader, selecting "Recovery mode", it progresses to "Android Recovery". Here selecting "Enter fastboot" appears to take it furthest in the booting process of landing at "Android Fastboot".
(The version info showed in Fastboot -- 18.0840.2202.231-0 -- matches with the last A11 update I downloaded from Asus website & had it installed late March this year.)
I don't think it can boot any further at the state that it's in now.
I think this is where it needs a raw firmware to be flashed. This step keeps core-dumping in my Linux laptop when trying to use WW_ZS673KS_18.0840.2106.83_M3.13.24.40-ASUS_1.1.92_Phone-user.raw file that was linked in the original post. This version appears to be quite old. Could the version mismatch between what the phone was running recently (18.0840.2202.231) and the raw file (18.0840.2106.83) cause the core-dump issue? IOW, would somebody have a link for 18.0840.2202.231 raw file please?
I couldn't use my work Windows laptop due to an issue I cannot overcome (installation of driver needed for the phone is somehow blocked in it). So, soon I'll try it from a personal Windows laptop of my neighbor. Let's see if it can progress any further with the help of Windows platform.
In the meantime, I can appreciate to be informed about any tips and tricks such as if this is something that the phone cannot be recovered from. Or even somebody highly skilled would like to help me to achieve a fully functional phone (with bootloader locked please) for a fair compensation. Please let me know. Thanks for any guidance.
Click to expand...
Click to collapse
Confirm that you can send fastboot commands to the device. It's a prerequisite for flashing the original boot img back or doing a RAW flash if boot looped. That's the very first step you need sorted and confirmed. Sounds like you may not be in the right Fastboot mode. The RAW version doesn't matter too much as long as it's in line with your device version, you just need it to get back up and can upgrade normally to other versions.
Hello.
Recently i flashed this: ROM in my Redmi 10C, and now I can't unlock the bootloader to flash it back to the stock ROM. Its not exactly bricked, but I can't root it. Why do I need to root it? Because you can do all the fun things only if you have root of course!
My question is:
Is the Redmi 10C going to let me flash it through EDL mode with QPST/QFIL (Qualcomm emergency tools for dumdums like me)
Or am I forced to go to someone with an authorized MI account (and that person can flash it). Alternatively, can I get my MI account authorized, or at least borrow one only for this.
Thank you for reading, and good day to you.
dthslce42 said:
Hello.
Recently i flashed this: ROM in my Redmi 10C, and now I can't unlock the bootloader to flash it back to the stock ROM. Its not exactly bricked, but I can't root it. Why do I need to root it? Because you can do all the fun things only if you have root of course!
My question is:
Is the Redmi 10C going to let me flash it through EDL mode with QPST/QFIL (Qualcomm emergency tools for dumdums like me)
Or am I forced to go to someone with an authorized MI account (and that person can flash it). Alternatively, can I get my MI account authorized, or at least borrow one only for this.
Thank you for reading, and good day to you.
Click to expand...
Click to collapse
First, be absolutely sure, which model, exactly is your device, check the code name of your device, and which ROM suits for it.
Still, not clear, how did you get to flash a custom ROM, with the bootloader locked?
TThThank you f
SubwayChamp said:
First, be absolutely sure, which model, exactly is your device, check the code name of your device, and which ROM suits for it.
Still, not clear, how did you get to flash a custom ROM, with the bootloader locked?
Click to expand...
Click to collapse
Thank you for answering. I apologize, the bootloader isn't locked. It's just that I cannot check the OEM unlock option (it's greyed out, on the system i installed).
First. I rooted my redmi 10c (still had the stock/default ROM)
Then. I proceeded to flash it (with twrp) with the ROM I quoted before. Although I suspect it didn't completed installation, because it doesn't have some features that all ROMs have (thank god it still has networking & basic telephony functions). And now i cannot root it, because i can't check 'OEM unlock' option.
I researched thoroughly and the only way I see fit (at the moment) is to use the EDL mode and the official 'MI Flash Pro tool'.
BUT according to various sources, the Redmi 10c falls in the category of models that need an Authorized MI Account (log into the official tool) to properly flash a system through EDL mode.
I want to restore it to the stock/default ROM. But to do that through EDL i need an authorized account.
My doubt is simple: do I really need the 'MI Flash Tool Pro' ? Or can I just enter EDL mode, use QPST/QFIL (also an official tool) and do it without the need to log in? (authorized).
Thank you for keeping up!
dthslce42 said:
TThThank you f
Thank you for answering. I apologize, the bootloader isn't locked. It's just that I cannot check the OEM unlock option (it's greyed out, on the system i installed).
First. I rooted my redmi 10c (still had the stock/default ROM)
Then. I proceeded to flash it (with twrp) with the ROM I quoted before. Although I suspect it didn't completed installation, because it doesn't have some features that all ROMs have (thank god it still has networking & basic telephony functions). And now i cannot root it, because i can't check 'OEM unlock' option.
I researched thoroughly and the only way I see fit (at the moment) is to use the EDL mode and the official 'MI Flash Pro tool'.
BUT according to various sources, the Redmi 10c falls in the category of models that need an Authorized MI Account (log into the official tool) to properly flash a system through EDL mode.
I want to restore it to the stock/default ROM. But to do that through EDL i need an authorized account.
My doubt is simple: do I really need the 'MI Flash Tool Pro' ? Or can I just enter EDL mode, use QPST/QFIL (also an official tool) and do it without the need to log in? (authorized).
Thank you for keeping up!
Click to expand...
Click to collapse
There are some confusing concepts here.
Firstly, a locked device doesn´t admit custom images, OK, I must assume you know that, next, if you didn´t expressly re-locked it, then it remains unlocked, the toggle unlock OEM grayed out, is not a problem, always that it is checked, it means your device is still unlocked.
Anyway, if the doubt persists, can you provide some screenshots.
SubwayChamp said:
There are some confusing concepts here.
Firstly, a locked device doesn´t admit custom images, OK, I must assume you know that, next, if you didn´t expressly re-locked it, then it remains unlocked, the toggle unlock OEM grayed out, is not a problem, always that it is checked, it means your device is still unlocked.
Anyway, if the doubt persists, can you provide some screenshots.
Click to expand...
Click to collapse
Mmm, i assumed the the device was still unlocked because it should persist (after you flash it any number of times you want). That, and when I restart it it shows an 'unlocked' padlock icon.
I'm going to post some screenshots.
Pic 2: the 'OEM unlock' should appear with the other debugging (Depuración) options, it doesn't.
Pic 1: it only appears when I search for it, when i tap on it it doesn't do anything.
(Sorry for the Spanish)
dthslce42 said:
Pic 2: the 'OEM unlock' should appear with the other debugging (Depuración) options, it doesn't.
Pic 1: it only appears when I search for it, when i tap on it it doesn't do anything.
(Sorry for the Spanish)
Click to expand...
Click to collapse
I guess you want to referring to OEM unlock toggle, that it´s not present. Again, that the toggle is not present, doesn´t mean, your bootloader is locked, most probably, the ROM you´re actually on is not showing, and nothing more, strange, but as it is.
So, you can do what you want, as the bootloader is unlocked.
You can be absolutely sure, by sending device to fastboot mode and doing fastboot oem device-info
SubwayChamp said:
I guess you want to referring to OEM unlock toggle, that it´s not present. Again, that the toggle is not present, doesn´t mean, your bootloader is locked, most probably, the ROM you´re actually on is not showing, and nothing more, strange, but as it is.
So, you can do what you want, as the bootloader is unlocked.
You can be absolutely sure, by sending device to fastboot mode and doing fastboot oem device-info
Click to expand...
Click to collapse
Mmmmm. I forgot to clarify... It doesn't even let me transfer files trough USB. So fastboot mode is locked(?). You could say that the phone is kinda bricked. Since I have 0 clues on how to change the ROM.
But back to the core of this thread.
Is it advisable to use any of the tools: QPST/QFIL(Qualcomm), in EDL mode to change the ROM.
I ask here because i hope someone knows if using the Qualcomm tools is gonna work.
Since xiaomi tools ABSOLUTELY require an authorized account to complete the process (and not hardbrick the phone pls).
dthslce42 said:
Mmmmm. I forgot to clarify... It doesn't even let me transfer files trough USB. So fastboot mode is locked(?). You could say that the phone is kinda bricked. Since I have 0 clues on how to change the ROM.
But back to the core of this thread.
Is it advisable to use any of the tools: QPST/QFIL(Qualcomm), in EDL mode to change the ROM.
I ask here because i hope someone knows if using the Qualcomm tools is gonna work.
Since xiaomi tools ABSOLUTELY require an authorized account to complete the process (and not hardbrick the phone pls).
Click to expand...
Click to collapse
Man, please, put all the attention, to both, to me, and to your words. I don´t understand at all, why you say you´re bricked or something, or you say, you don´t know how to put another ROM onto your device when you already flashed in the past a custom ROM, Why you should use Qfil/QPST or other of those unbricking tool, if...
Your device has the bootloader UNLOCKED and you DON´T need to put the Xiaomi ROM into your device, an authorized account is needed when you need to flash the OFFICIAL ROM, not for any other custom ROM, in your case, you can flash any other custom ROM as you already did it in the past.
Better tell me:
1-Can your device be power on?
2-Can your device enter to TWRP, and/or fastboot mode?
3-What exactly do you want to achieve right now?
"1-Can your device be power on?"
Yes.
"2-Can your device enter to TWRP, and/or fastboot mode?"
It can enter fastboot mode. But not TWRP, it was erased. I didn't realize until it was too late.
"3-What exactly do you want to achieve right now?"
Either change to other ROM. Or reinstall the current one. But I don't know how.
dthslce42 said:
"1-Can your device be power on?"
Yes.
"2-Can your device enter to TWRP, and/or fastboot mode?"
It can enter fastboot mode. But not TWRP, it was erased. I didn't realize until it was too late.
"3-What exactly do you want to achieve right now?"
Either change to other ROM. Or reinstall the current one. But I don't know how.
Click to expand...
Click to collapse
Ok, if you have a fastboot mode working fine, then you just have to reinstall the recovery available for your device, as you did it once, then, rebooting to it, just flash the ROM available for your device. Jut repeat that process.
SubwayChamp said:
Ok, if you have a fastboot mode working fine, then you just have to reinstall the recovery available for your device, as you did it once, then, rebooting to it, just flash the ROM available for your device. Jut repeat that process.
Click to expand...
Click to collapse
I'm really grateful mate. What you told me about the EDL mode (that i can install any ROM with the Qualcomm tool, as long as it's not the official from Xiaomi) was really helpful. Thank you!
The phone can enter fastboot mode, but it's not recognized by any PC. (That's why I say the 'OEM unlock' option it's the most likely culprit) so -i think- it cannot be done that way.
All drivers were installed (automatically, the unlock tool has an option to scan and install the correct drivers, and manually)
dthslce42 said:
I'm really grateful mate. What you told me about the EDL mode (that i can install any ROM with the Qualcomm tool, as long as it's not the official from Xiaomi) was really helpful. Thank you!
The phone can enter fastboot mode, but it's not recognized by any PC. (That's why I say the 'OEM unlock' option it's the most likely culprit) so -i think- it cannot be done that way.
All drivers were installed (automatically, the unlock tool has an option to scan and install the correct drivers, and manually)
Click to expand...
Click to collapse
OK, from what I understood, you want to follow the guidelines provided, I mean, flash the TWRP again using fastboot, then boot to it, and from there can flash any custom ROM...
If I´m right, and this is correct, you are feeling that you´re stuck in fastboot mode but the device is not recognized as of now...
Unlock tool and also the Xiaomi Unlock tool or even the Xiaomi (Pro) tool, has the correct fastboot drivers for any Xiaomi device, BUT, the issue is "simply" that you have to "call" that specific drivers and "match" it to your device, the right drivers are already there, from within a long list of all of the device (compatible or not) drivers...
I mean, you just have to connect your device in fastboot mode, you have to see, either the Xiaomi bunny (in older devices) or the fastboot legend into your screen, then just update the drivers...
Keep the device manager windows opened in a part of your PC, and check the changes when you connect your device, then you have to see, some driver that appeared, and update it from the list following something like the images I´ll upload, the guide I made is to update EDL drivers, but apply the part you need, in order to get Android Bootloader Interface, note that your device has not to be listed under Port COM like in EDL.
When you uncheck this option, then you can find it from the list.