i decided to parse the lk img from the android 9 stock rom so heres the output
Code:
[?] Image size (from header): 847276 bytes
[?] Image name (from header): lk
[?] LK version: N/A
[?] Command Line: N/A
[?] Platform: MT6761
[?] Product: hardware.sku
[?] Needs unlock code: False
[?] Uses verified boot: True
[?] Factory reset protection (FRP): True
[?] FOTA support: False
[?] Available OEM commands: ['fastboot oem p2u', 'fastboot oem off-mode-charge', 'fastboot oem key', 'fastboot oem lks', 'fastboot oem scp_status', 'fastboot oem scp_log_thru_ap_uart', 'fastboot oem usb2jtag', 'fastboot oem ultraflash', 'fastboot oem ultraflash_en', 'fastboot oem secureBoot', 'fastboot oem battery', 'fastboot oem getversions', 'fastboot oem alive', 'fastboot oem getprojectcode', 'fastboot oem getUID', 'fastboot oem auth_timecount', 'fastboot oem auth_start', 'fastboot oem permission', 'fastboot oem getpermissions', 'fastboot oem getsecurityversion', 'fastboot oem md5', 'fastboot oem repair', 'fastboot oem simunlock', 'fastboot oem simlock', 'fastboot oem simlock_status', 'fastboot oem getdllname', 'fastboot oem unlock']
[?] LK ATAGs: ['atag,videolfb-fb_base_h', 'atag,videolfb-fb_base_l', 'atag,videolfb-vramSize', 'atag,boot', 'atag,imix_r', 'atag,fg_swocv_v', 'atag,fg_swocv_i', 'atag,shutdown_time', 'atag,boot_voltage', 'atag,two_sec_reboot', 'atag,mem', 'atag,vcore_dvfs', 'atag,dfo', 'atag,meta', 'atag,devinfo', 'atag,videolfb', 'atag,mdinfo', 'atag,ptp', 'atag,masp']
now one thing im confused about: fastboot oem key
i had researched this and it helped unlock the bootloader of the Nokia 3
they did it by
fastboot oem key <MD5 Hash Of Your Device Serial>
fastboot flashing unlock
i would try and test this but it dont have the phone on me rn
areallydumbperson said:
i decided to parse the lk img from the android 9 stock rom so heres the output
Code:
[?] Image size (from header): 847276 bytes
[?] Image name (from header): lk
[?] LK version: N/A
[?] Command Line: N/A
[?] Platform: MT6761
[?] Product: hardware.sku
[?] Needs unlock code: False
[?] Uses verified boot: True
[?] Factory reset protection (FRP): True
[?] FOTA support: False
[?] Available OEM commands: ['fastboot oem p2u', 'fastboot oem off-mode-charge', 'fastboot oem key', 'fastboot oem lks', 'fastboot oem scp_status', 'fastboot oem scp_log_thru_ap_uart', 'fastboot oem usb2jtag', 'fastboot oem ultraflash', 'fastboot oem ultraflash_en', 'fastboot oem secureBoot', 'fastboot oem battery', 'fastboot oem getversions', 'fastboot oem alive', 'fastboot oem getprojectcode', 'fastboot oem getUID', 'fastboot oem auth_timecount', 'fastboot oem auth_start', 'fastboot oem permission', 'fastboot oem getpermissions', 'fastboot oem getsecurityversion', 'fastboot oem md5', 'fastboot oem repair', 'fastboot oem simunlock', 'fastboot oem simlock', 'fastboot oem simlock_status', 'fastboot oem getdllname', 'fastboot oem unlock']
[?] LK ATAGs: ['atag,videolfb-fb_base_h', 'atag,videolfb-fb_base_l', 'atag,videolfb-vramSize', 'atag,boot', 'atag,imix_r', 'atag,fg_swocv_v', 'atag,fg_swocv_i', 'atag,shutdown_time', 'atag,boot_voltage', 'atag,two_sec_reboot', 'atag,mem', 'atag,vcore_dvfs', 'atag,dfo', 'atag,meta', 'atag,devinfo', 'atag,videolfb', 'atag,mdinfo', 'atag,ptp', 'atag,masp']
now one thing im confused about: fastboot oem key
i had researched this and it helped unlock the bootloader of the Nokia 3
they did it by
fastboot oem key <MD5 Hash Of Your Device Serial>
fastboot flashing unlock
i would try and test this but it dont have the phone on me rn
Click to expand...
Click to collapse
What did you use to parse the image?
honestly i forgot, if i find the tool ill give u the link
Thank you... I'm trying to parse the lk img from Motorola XT2213-3(MT6833) but I don't have enough patience to do it using a hex viewer lol
damnthefall said:
Thank you... I'm trying to parse the lk img from Motorola XT2213-3(MT6833) but I don't have enough patience to do it using a hex viewer lol
Click to expand...
Click to collapse
this took alot of hunting but i finally found it https://github.com/leeminh888/lk_parser
Why do I bootloop after flashing Corvus OS, and my twrp shows random file name
Qintil5 said:
Why do I bootloop after flashing Corvus OS, and my twrp shows random file name
Click to expand...
Click to collapse
wrong place to discuss this, also the random file names are due to user encryption im trying to fix this but my nokia 2.2 died and i have no one to test
areallydumbperson said:
areallydumbperson said:
wrong place to discuss this, also the random file names are due to user encryption im trying to fix this but my nokia 2.2 died and i have no one to test
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Can corvus OS be booted without turning off encryption?
Related
I found a way how to re-enable the SD CARD.
during the process in the FASTBOOT MODE
I need to put this codes:
"fastboot oem enableqxdm 0"
"fastboot reboot"
but during the "fastboot oem enableqxdm 0" on the terminal mode (PC)
it just hangs and if I remove the usb connector the output code will be
fastboot oem enableqxdm 0
... FAILED
ANY HELP?
im the same way as you! what can i do?!
Please help
After you typed the command, just wait a few minutes, like about 15 minutes.
Btw, is this not the wrong section?
Setting up and Using ADB/Fastboot
[INDEX]
Helpful InformationWelcome, this thread has been created to encompass everything you may need for Using ADB. Please only post in this thread with feedback on how to improve this document. Do not post "Thank you" type responses. If you have additional questions or require more help, try to find an existing thread, or create your own thread in the Q&A forum. Do not use this as a general help thread.Click on a link below for More Info
ADB Tips & Tricks: ADB commands that every power user should know about!
There's a lot to the Android Debug Bridge that you may not know about. Click here for some useful tips and tricks for using ADB!
www.xda-developers.com
What is ADB
Download SDK Platform-Tools from Google (Android Studio)
OEM USB Drivers
Setting up ADB/Fastboot
Testing ADB
Testing Fastboot
Some Commands for Devices with a/b Slots
Show known File Types (Windows)
Using Hash Checksums
Some Devices have unique commands like Amazon Fire's and Motorola devices see
Unbrick your Moto
Official Motorola Firmware and Flashing Instructions
[Index] Amazon (Kindle) Fire(s)
*Forum Rules | New Users Guide | XDA Tour | Report Posts
Please look for a similar thread when visiting another device forum.
If you would like to create an [INDEX] please Click Here.
A special thanks to everyone who contributed to the production of this INDEX
Please note: This is and will be, an ongoing WIP
What is ADB?
Android Debugging Bridge
https://en.wikipedia.org/wiki/Android_software_development#ADB
For Mac: see Can ADB/Fastboot be used on Linux and Mac?
Setting up and using ADB/Fastboot (Android Debugging Bridge)
There are several methods for setting up ADB
[GUIDE] Setting up ADB and fastboot on an x86_64 Chromebook by nathanchance
[Guide] How to set up fastboot/adb to be used in system wide command prompt Windows by eqbirvin
Google Releases Separate ADB and Fastboot Binary Downloads
[TOOL] [WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.3 by Snoop05
The Easiest Way to Install Android's ADB and Fastboot Tools on Any OS by lifehacker
http://www.rootjunky.com/learn-android/adb-and-fastboot-setup-commands/
Setting up Android sdk, and makking adb.exe global
Using adb.exe from a specific folder, easy method (Windows)
Install adb drivers for your device or try the Generic Adb drivers
Download newest adb files
adb1.0.32-2014.zip
Setup ADB
Create a folder in C drive like ADB (c:/adb)
Open start menu and type CMD
Right click on CMD > select open file location
Find cmd.exe, right click and copy
Paste cmd.exe into adb folder
Move uncompressed adb files to adb folder (AdbWinUsbApi.dll, AdbWinApi.dll, adb.exe, fastboot.exe)
Using ADB
Double click on cmd.exe in adb folder
run commands in command prompt that opens
some commands to test connection
Code:
adb devices
return should be serial # ....................... Device
Code:
A000xxxxxxxxx......................Device
Booting to recovery
Code:
adb reboot recovery
Booting to fastboot
Code:
adb reboot-bootloader
Using Fastboot
Note:
adb commands are for rom and recovery (e.g. adb devices)
fastboot commands are for fastboot/bootloader (e.g. fastboot devices)
Show known File Types if you can not see file extension like .zip
Open C:/Mfastboot folder
Select View>options>Change folder and Search options
In Folder Options Select Tab View
Uncheck Box: Hide Extensions for Known file Types
Select OK
Testing ADB commands
Setting up ADB/Fastboot (Windows)
Long way
Android SDK
Short Methods
[TOOL]Minimal ADB and Fastboot by shimp208
[TOOL] [WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer by Snoop05
Using ADB/Fastboot
adb commands are used in normal boot/OS or in Recovery
fastboot commands are used in fastboot/bootloader mode
Testing Fastboot Commands
All Fastboot Commands
Install Drivers
Verify Drivers are correct
get adb and fastboot files
Boot to Fastboot mode
Test fastboot mode connection by sending this code through command prompt
Code:
fastboot getvar product
should get the codename for your device back
ford, THEBES, otter....
also can test with
Code:
fastboot devices
you should get Serial # ....... Device/Mode
Code:
G090HXXXXXX................... device
Show known File Types if you can not see file extensions like .zip
Open a folder
Select View>options>Change folder and Search options
In Folder Options Select Tab View
Uncheck Box: Hide Extensions for Known file Types
Select OK
Google Finally Lets You Download ADB and Fastboot As Standalone Tools
http://lifehacker.com/google-finally-lets-you-download-adb-and-fastboot-as-st-1790840830
https://developer.android.com/studio/releases/platform-tools.html#download
Commands for devices with a/b slots
To check active slot
Code:
fastboot getvar current-slot
To change to slot a
Code:
fastboot --set-active=a
To change to slot b
Code:
fastboot --set-active=b
To toggle from active to inactive Slot
Code:
fastboot set_active other
Change X to a or b
Code:
fastboot flash boot_X twrp.img
Fastboot From Any Directory on your Windows/Linux PC
https://www.xda-developers.com/adb-fastboot-any-directory-windows-linux/
Fastboot commands
List of ADB and Fastboot Commands - Phonlab
Here are some commands for Adb and Fastboot. I have collected these over the years including some fun OEM commands.
phonlabtech.com
Spoiler: All Fastboot Commands
fastboot flash recovery TWRP-recovery.img
fastboot getvar emmc_clr_writeprot
fastboot getvar emmc_set_writeprot
fastboot getvar ptable
fastboot getvar cmd
fastboot getvar resize
fastboot getvar ddrid
fastboot getvar emmcid
fastboot getvar memory_num
fastboot getvar serialno
fastboot getvar product
fastboot getvar VerifyPartition
fastboot getvar nve
fastboot getvar call
fastboot getvar memory_info_
fastboot getvar emmc
fastboot getvar memory
fastboot getvar version
fastboot getvar rescue_version
fastboot getvar rescue_phoneinfo
fastboot getvar vendorcountry
fastboot getvar rescue_ugs_port
fastboot getvar rescue_enter_recovery
fastboot getvar max-download-size
fastboot getvar error_print
fastboot getvar partition-type rescue_recovery
fastboot reboot
fastboot reboot-bootloader
fastboot set_active -a
fastboot oem reboot-download
fastboot oem reboot-ftm
fastboot oem rebootRUU
fastboot dump
fastboot oem listpartition
fastboot oem listram
fastboot oem dmesg
fastboot oem last_dmesg
fastboot oem update_emmc_partition
fastboot oem read_mmc
fastboot oem write_mmc
fastboot oem batt_enable_fast_charge
fastboot oem batt_test_pwr_supply
fastboot oem batt_for_pa_testv
fastboot oem batt_disable_safty_timer
fastboot oem batt_keep_charge_on
fastboot oem uart
fastboot oem htc_radio_debug_func
fastboot oem htcramdump
fastboot oem autordump2storage
fastboot oem test_emmc
fastboot oem ufs_get_lun
fastboot oem ufs_set_lun
fastboot oem erase_phone_storage
fastboot oem unlock
fastboot oem lock
fastboot flashing unlock
fastboot flashing lock
fastboot flashing lock_critical
fastboot flashing unlock_critical
fastboot flashing get_unlock_ability
fastboot flashing get_unlock_bootloader_nonce
fastboot flashing unlock_bootloader
fastboot flashing lock_bootloader
fastboot oem device-info
fastboot oem show-barcodes
fastboot oem ramdump
fastboot oem getcolorid
fastboot oem setcolorid
fastboot oem getcid
fastboot oem setcid
fastboot oem enable-charger-screen
fastboot oem disable-charger-screen
fastboot oem off-mode-charge
fastboot oem select-display-panel
fastboot oem readconfig
fastboot oem writeconfig
fastboot oem easydump
fastboot oem readunlock
fastboot oem dsir
fastboot oem ddrtest
fastboot oem dump_ram_full
fastboot oem get_ks_token
fastboot oem get_anti_theft_status
fastboot oem sha1sum
fastboot oem readmeid
fastboot oem refurbish
fastboot reboot-bootloader
fastboot flashing unlock
fastboot oem unlock-go
fastboot oem frp-unlock
fastboot oem frp-erase
fastboot oem enable reduced-version
fastboot flashing lock
fastboot oem device-info.preflash
fastboot flashing get_unlock_ability
fastboot oem enable-charger-screen
fastboot oem disable-charger-screen
fastboot oem enable-bp-tools
fastboot oem disable-bp-tools
fastboot oem enable-hw-factory
fastboot oem disable-hw-factory
fastboot oem select-display-panel
fastboot oem off-mode-charge enable
fastboot oem off-mode-charge disable
fastboot oem ramdump enable
fastboot oem ramdump disable
fastboot oem uart enable
fastboot oem uart disable
fastboot oem hwdog certify begin
fastboot flash:slock
fastboot oem hwdog certify close
fastboot oem get-imei1
fastboot oem get-meid
fastboot oem get-sn
fastboot oem get-bsn
fastboot oem get_verify_boot_status
fastboot oem enable_dm_verity
fastboot reboot emergency = EDL Mode
sd_shadow said:
To check active slot
Code:
fastboot getvar current-slot
To change to slot a
Code:
fastboot --set-active=a
To change to slot b
Code:
fastboot --set-active=b
To toggle from active to inactive Slot
Code:
fastboot set_active other
Change X to a or b
Code:
fastboot flash boot_X twrp.img
Click to expand...
Click to collapse
Hi. Now I got to change slot to a.
https://www.dropbox.com/s/2kxb77p5g2bwcxv/Anotação 2020-09-09 213749.jpg?dl=0
However, I still find an error when I type the following commands, the command does not end:
https://www.dropbox.com/s/e00igqsicqyd7au/Anotação 2020-09-09 214453.jpg?dl=0
I was stuck at fastboot, so I decided to look out for extra fastboot commands, after I was done, I didn't needed it at all, but after I saw a command to reset dm verity (only possible via re-flashing stock rom before) I decided to share with the community
Be aware that I didn't tested any command
It'd be good if you say me wich works or not
Fastboot:
Code:
fastboot reboot bootloader
fastboot reboot recovery
fastboot reboot-bootloader
fastboot oem unlock
fastboot oem unlock-go
fastboot oem lock
fastboot flashing unlock
fastboot flashing lock
fastboot flashing lock_critical
fastboot flashing unlock_critical
fastboot flashing get_unlock_ability
fastboot oem device-info preflash
fastboot oem enable-charger-screen
fastboot oem disable-charger-screen
fastboot oem off-mode-charge
fastboot oem select-display-panel
fastboot oem gpt-info
fastboot oem force-hwid_
fastboot oem update-cmdline_
fastboot oem get-splash
fastboot oem show-barcode
fastboot oem unTAR_
fastboot oem dump-pmic-reg_
fastboot oem write-pmic-reg_
fastboot oem get-gpio_
fastboot oem check-fuse
fastboot oem set-fuse
fastboot oem reset-dev_info
fastboot oem adb_enable
fastboot oem shutdown
fastboot oem auth-hash
fastboot oem gen-random
fastboot oem EnterShippingMode
fastboot oem reboot-recovery
fastboot oem check-bat
fastboot oem set-batvol_
fastboot oem get-batvol
fastboot oem get-batcap
fastboot oem mbr-info
fastboot oem reset-mbr-info
fastboot oem read_emmc_blk_
fastboot oem check-DDR
fastboot oem check-ftm
fastboot oem enable-ftm
fastboot oem enable-userdebug
fastboot oem ffu_unlock
fastboot oem emmc_info
fastboot oem ffu_auto
fastboot oem reset_ffu
fastboot oem check-qcn-golden-copy
fastboot oem reset-boot_count
fastboot oem dump-log
fastboot oem system-info
fastboot oem get_build_version
fastboot oem partition-test
fastboot oem crc32-size_
fastboot oem crc32-len_
fastboot oem crc32_
fastboot oem hash_
fastboot oem crc32_debug
fastboot oem crc_test
fastboot oem reset-repartition
fastboot oem reset-dm-verity
some adb commands:
Code:
adb reboot oem-88 (shutdown)
adb reboot oem-68 (factoey_reset_text)
adb reboot oem-69 (factoey_reset)
adb reboot oem-23 (fastboot)
adb reboot oem-78 (recovery_gpt)
adb reboot oem-63 (untar)
adb reboot oem-66 (adb_enable)
adb reboot oem-52 (selinux_permissive)
adb reboot oem-08 (user_unlock)
adb reboot oem-99 (verify_data_size)
adb reboot oem-43 (shipping_mode)
adb reboot oem-11 (ota_set_dm_verity)
adb reboot oem-12 (ota_set_dm_verity_r) [BL]
thoose adb comments are from the code, I'm not the one that wrote them.
Tested:
fastboot oem dump-log
shows some bootloader level logs from recent boots
fastboot oem system-info
Code:
(bootloader) board_info: msm8953
(bootloader) mem_info:
(bootloader) mmc_info:
(bootloader) product_name: ASUS_Z017D_1
(bootloader) product_locale: en-US
(bootloader) product_carrier: US-ASUS_Z017D-WW_Phone
(bootloader) csc_build_version: WW_ZE520KL-14.2020.1703.28-20170410
(bootloader) bt_mac:
(bootloader) wifi_mac:
(bootloader) imei: XXXXXXXXXX
(bootloader) imei2: XXXXXXXXXXX
(bootloader) ssn: XXXXXXXX
(bootloader) isn:
(bootloader) color:
(bootloader) country:
(bootloader) customer:
(bootloader) revenuecountry:
(lol, really lost some **** flashing my phone)
fastboot oem get_build_version
gets the last installed stock rom version, even if you're running custom roms
fastboot oem get-batcap
returns battery capacity
fastboot oem get-batvol
returns battery voltage and capacity
Huawei fastboot commands
I find some fastboot commands for Huawei ( Get from my P8 Lite 2015 version )
Note: Very high possibility to brick your device if use it wrong!!!!
There they go:
fastboot
flash slock <-- this one was write like it is!!! weird!!!
flash boot
flash recovery
flash system
flash userdata
flash cache
flash cust
flash rescue_recovery
flash device_validation
getvar rescue_version
getvar rescue_phoneinfo
getvar vendorcountry
getvar rescue_ugs_port
getvar rescue_enter_recovery
getvar max-download-size
getvar error_print
getvar partition-type
oem emmc_diag
oem emmc-dump
oem get_key_version
oem battery_present_check
oem get_hwnff_ver
oem get-psid
oem get-build-number
oem get-product-model
oem hwdog certify close
oem backdoor end
oem get-bootinfo
oem check-rootinfo
oem check-image
oem relock
oem hwdog certify set
oem backdoor set
oem frp-erase
oem unlock
oem frp-unlock
oem lock-state info
oem backdoor info
oem hwdog certify begin
oem backdoor get
I hope this help some one!
Bye!
Thank you for the share!
persona78 said:
Huawei fastboot commands
I find some fastboot commands for Huawei ( Get from my P8 Lite 2015 version )
Note: Very high possibility to brick your device if use it wrong!!!!
There they go:
fastboot
flash slock <-- this one was write like it is!!! weird!!!
flash boot
flash recovery
flash system
flash userdata
flash cache
flash cust
flash rescue_recovery
flash device_validation
getvar rescue_version
getvar rescue_phoneinfo
getvar vendorcountry
getvar rescue_ugs_port
getvar rescue_enter_recovery
getvar max-download-size
getvar error_print
getvar partition-type
oem emmc_diag
oem emmc-dump
oem get_key_version
oem battery_present_check
oem get_hwnff_ver
oem get-psid
oem get-build-number
oem get-product-model
oem hwdog certify close
oem backdoor end
oem get-bootinfo
oem check-rootinfo
oem check-image
oem relock
oem hwdog certify set
oem backdoor set
oem frp-erase
oem unlock
oem frp-unlock
oem lock-state info
oem backdoor info
oem hwdog certify begin
oem backdoor get
I hope this help some one!
Bye!
Click to expand...
Click to collapse
Can you please share fastboot binaries in orders supports all commands?
Dears, with the unlock bootloader... how we can run around? Only by purchasing the unlock key? I have a P9Lite for forensic case to analize e.g...
fastboot oem get-psid does not work on a Psmart POT-LX1
but would be very helpful for get IMEI on P20, where it is not printed on backside:
>fastboot oem get-psid
...
FAILED (remote: Command not allowed)
finished. total time: 0.016s
fastboot flashing get_unlock_ability
fastbootflashing unlock
fastboot flashing lock
fastboot flashing unlock_critical
fastboot flashing lock_critical
fastboot oem enable-charger-screen
fastboot oem disable-charger-screen
fastboot oem off-mode-charge
fastboot oem select-display-panel
fastboot oem device-info
fastboot reboot-fastboot
fastboot reboot-bootloader
fastboot oem gpt-info
fastboot oem adb_enable
fastboot oem shutdown
fastboot oem get-dtid
fastboot oem get-hwid
fastboot oem get-prjid
fastboot oem get-skuid
fastboot oem get-rfid
fastboot oem get-featureid
fastboot oem get-jtagid
fastboot oem get-bcid
fastboot oem get-secdispid
fastboot oem get-cpuidhash
fastboot oem get-toolid
fastboot oem isn-info
fastboot oem ssn-info
fastboot oem system-info
fastboot oem get_build_version
fastboot oem get-batcap
fastboot oem get-batvol
fastboot oem get-bootcount
fastboot oem factory-reset
fastboot oem factory-reset2
fastboot oem reboot-recovery
fastboot oem set-permissive
fastboot oem enter-dload
fastboot oem check-s3
fastboot oem EnterShippingMode
fastboot oem check-nrfuse
fastboot oem check-fuse
fastboot oem fuse-info
fastboot oem show-barcode
fastboot oem checksetupwizard
fastboot oem asus-csc_lk
fastboot oem rsa_test_
fastboot oem crc32_
fastboot oem hash_
fastboot oem gen-random
fastboot oem auth-hash
fastboot oem auth-hash_2
fastboot oem auth-hash_3
fastboot oem get-imeiauth
fastboot oem slot_b_enable
fastboot oem get-verify_vbmeta_ret
fastboot oem update-cmdline_
fastboot oem backup-fac
fastboot oem restore-fac
fastboot oem get-pmic-reg_
fastboot oem write-pmic-reg_
fastboot oem reset-boot_count
fastboot oem reset-lock_count
fastboot oem reset-a_retry_count
fastboot oem reset-a_unbootable_count
fastboot oem reset-b_retry_count
fastboot oem reset-b_unbootable_count
fastboot oem force-hwid_
fastboot oem reset-dev_info
fastboot oem reset-auth2
fastboot oem reset-auth3
fastboot oem disable-verity
fastboot oem enable-verity
fastboot oem enable-vbmeta
fastboot oem read-vbmeta
fastboot oem read-rollback
fastboot oem reset-rollback
hi, which one i can use to unlock my bootloader?
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem device-info
...
(bootloader) Verity mode: true
(bootloader) Device unlocked: false
(bootloader) Device critical unlocked: false
(bootloader) Charger screen enabled: true
(bootloader) Device authorized: false
(bootloader) Device authorized2: false
(bootloader) WaterMask unlock: N
(bootloader) XBL: Post-CS3-30-ZS673KS-user
(bootloader) ABL: Post-CS3-25-WW-user
(bootloader) CID: ASUS
(bootloader) COUNTRY: WW
(bootloader) Project: ZS673KS
(bootloader) DT ID: 100
(bootloader) SB: Y
(bootloader) SBNR: Y
(bootloader) DDR Manufacturer ID: 1
(bootloader) DDR Device Type: 8
(bootloader) TotalDMCounter: 0
(bootloader) DMCounter: 0
(bootloader) SlotARetryCounter: 0
(bootloader) SlotAUnbootableCounter: 0
(bootloader) SlotBRetryCounter: 0
(bootloader) SlotBUnbootableCounter: 0
(bootloader) BOOT_COUNT: 32
(bootloader) LOCK_COUNT: 1
(bootloader) Check_APDP: 0
(bootloader) rawdump_en: false
(bootloader) Current Slot: b
(bootloader) Slot_b bootable: Bootable
(bootloader) AVB Verity: Enable
(bootloader) Verify vbmeta ret: 0
(bootloader) ABL_FTM: FALSE
(bootloader) SNAPSHOT-UPDATE-STATUS: none
OKAY [ 0.080s]
finished. total time: 0.080s
Following the answer.
fastboot oem device-info does not work for me
Code:
> fastboot oem device-info
FAILED (remote: 'Command not supported in default implementation')
fastboot: error: Command failed
And i get the same result for any fastboot oem command, even when i type random things
Almost every "generic" commands such as fastboot flashing get_unlock_ability does not work either, giving me a different message
Code:
> fastboot flashing get_unlock_ability
FAILED (remote: 'Unrecognized command flashing get_unlock_ability')
fastboot: error: Command failed
The only commands that worked so far are fastboot reboot-fastboot and fastboot reboot-bootlader
Code:
> fastboot reboot-fastboot
Rebooting into fastboot OKAY [ 0.000s]
< waiting for any device >
Finished. Total time: 8.642s
I have a WW device ( i think its a new one ), and i never unlocked the bootloader before, so am i missing something here ??
I really want to check those values to confirm that the device hasnt been unlocked and a few other things.
zvrsd said:
fastboot oem device-info does not work for me
Code:
> fastboot oem device-info
FAILED (remote: 'Command not supported in default implementation')
fastboot: error: Command failed
And i get the same result for any fastboot oem command, even when i type random things
Almost every "generic" commands such as fastboot flashing get_unlock_ability does not work either, giving me a different message
Code:
> fastboot flashing get_unlock_ability
FAILED (remote: 'Unrecognized command flashing get_unlock_ability')
fastboot: error: Command failed
The only commands that worked so far are fastboot reboot-fastboot and fastboot reboot-bootlader
Code:
> fastboot reboot-fastboot
Rebooting into fastboot OKAY [ 0.000s]
< waiting for any device >
Finished. Total time: 8.642s
I have a WW device ( i think its a new one ), and i never unlocked the bootloader before, so am i missing something here ??
I really want to check those values to confirm that the device hasnt been unlocked and a few other things.
Click to expand...
Click to collapse
Your phone is tencent edition or not?
HunterTik said:
Your phone is tencent edition or not?
Click to expand...
Click to collapse
No, its the ROG edition
zvrsd said:
No, its the ROG edition
Click to expand...
Click to collapse
Then use official unlock mathod hope it works for you.
zvrsd said:
fastboot oem device-info does not work for me
Code:
> fastboot oem device-info
FAILED (remote: 'Command not supported in default implementation')
fastboot: error: Command failed
And i get the same result for any fastboot oem command, even when i type random things
Almost every "generic" commands such as fastboot flashing get_unlock_ability does not work either, giving me a different message
Code:
> fastboot flashing get_unlock_ability
FAILED (remote: 'Unrecognized command flashing get_unlock_ability')
fastboot: error: Command failed
The only commands that worked so far are fastboot reboot-fastboot and fastboot reboot-bootlader
Code:
> fastboot reboot-fastboot
Rebooting into fastboot OKAY [ 0.000s]
< waiting for any device >
Finished. Total time: 8.642s
I have a WW device ( i think its a new one ), and i never unlocked the bootloader before, so am i missing something here ??
I really want to check those values to confirm that the device hasnt been unlocked and a few other things.
Click to expand...
Click to collapse
Did this work for you? I have the exact same problem even after using the official bootloader unlock..
zvrsd said:
fastboot oem device-info does not work for me
Code:
> fastboot oem device-info
FAILED (remote: 'Command not supported in default implementation')
fastboot: error: Command failed
And i get the same result for any fastboot oem command, even when i type random things
Click to expand...
Click to collapse
You're in userspace fastboot. Reboot to the bootloader
The one you get to by using volume up and power is bootloader
From bootloader `fastboot reboot fastboot` -> userspace fastboot
From userspace fastboot, select reboot bootloader -> bootloader
`adb reboot fastboot` -> userspace fastboot
`adb reboot bootloader` -> bootloader
The bootloader also needs to be unlocked for most commands to work.
Andrologic said:
Did this work for you? I have the exact same problem even after using the official bootloader unlock..
Click to expand...
Click to collapse
You might want to check this https://forum.xda-developers.com/t/rog5-fastboot-commands.4255537/post-85135791
After following his instructions, i was able to make the commands work.
Big thanks to him !!
zvrsd said:
You might want to check this https://forum.xda-developers.com/t/rog5-fastboot-commands.4255537/post-85135791
After following his instructions, i was able to make the commands work.
Big thanks to him !!
Click to expand...
Click to collapse
Thanks. Found it - going to try..