Database Info

Anyone able to root the Dec update?

For the life of me I cannot root this latest patch. I have tried 6 times either with having the Magisk app repack the boot image or by booting TWRP to install the Magisk zip. Using either method forces my phone into the same state/condition. When the phone reboots, it goes into recovery which says the data on my phone may be corrupt and prompts me to either try again or factory restore (erase data).

i was able to. i booted into twrp, sideloaded the twrp installer, then the magisk zip and sultan kernel and everything is running smoothly for me

Ok, so I was able to recover and root from an answer given in a pixel 3 thread using:
Pixel 3/Pixel 3 XL
- fastboot flash boot --slot all boot.img (from December factory image)
- fastboot boot twrp-3.2.3-1...img
- install Magisk' uninstaller
- magisk-18.0.zip
- reboot system
What happens though is when I use adaway to update the hosts file, it breaks everything and I can't boot into system until I do the above steps again. Strange...
Do you have adaway install by chance?

Hi! I have no problem with last update, magisk nor adaway. I just flashed last update with flash-all.bat script, than fastboot twrp, install magisk ver. 18... and everything is working on 100%.

To successfully root on the Dec update you must use Magisk v18.0
[2018.12.8] Magisk v18.0 - Root & Universal Systemless Interface [Android 5.0+]
If you've used an older version, you'll get a boot loop into Recovery.
Side load / install the uninstaller from @topjohnwu's page linked above.
Then side load / install again with v18.0
Use the uninstaller first.

Diesel_Jeremiah said:
To successfully root on the Dec update you must use Magisk v18.0
[2018.12.8] Magisk v18.0 - Root & Universal Systemless Interface [Android 5.0+]
If you've used an older version, you'll get a boot loop into Recovery.
Side load / install the uninstaller from @topjohnwu's page linked above.
Then side load / install again with v18.0
Use the uninstaller first.
Click to expand...
Click to collapse
I'm on the December patch and am rooted with Magisk 17.1.
I actually just noticed the new update and am fixing to update Magisk. But you don't have to use v18. 0 to root December update. I've been on December update since it came out and rooted like always right away and haven't had any bootloops.

I rooted okay today with Magisk 18.0. It sounds like some people have had problems if they did not first uninstall Magisk with the latest uninstaller. That's what I did as a precaution (rather than just restoring the stock boot.img with the Magisk app, before upgrading the factory image).

FilthyFord said:
I'm on the December patch and am rooted with Magisk 17.1.
I actually just noticed the new update and am fixing to update Magisk. But you don't have to use v18. 0 to root December update. I've been on December update since it came out and rooted like always right away and haven't had any bootloops.
Click to expand...
Click to collapse
I had issues on both of my Pixel 2 phones trying to use any Magisk less than v18.0
I also had issues with v18.0 until I used the uninstaller first.
I read that other people were having the same issue.
I guess you got lucky?

Diesel_Jeremiah said:
I had issues on both of my Pixel 2 phones trying to use any Magisk less than v18.0
I also had issues with v18.0 until I used the uninstaller first.
I read that other people were having the same issue.
I guess you got lucky?
Click to expand...
Click to collapse
I guess so. I always open the .bat file and remove the -w so that it don't we my phone tough. Not sure if that makes a difference.

somin.n said:
Hi! I have no problem with last update, magisk nor adaway. I just flashed last update with flash-all.bat script, than fastboot twrp, install magisk ver. 18... and everything is working on 100%.
Click to expand...
Click to collapse
I enabled automatically granted root access and after a few mins after boot it granted access to adaway and after a reboot it seems to have worked again.

https://androidfilehost.com/?w=files&flid=249276&sort_by=date&sort_dir=DESC

Stock Android 11

Just Posted
https://developers.google.com/android/images#sunfish

fronto said:
Just Posted
https://developers.google.com/android/images#sunfish
Click to expand...
Click to collapse
I just checked my 4a with the Check for Updates button under settings and Android 11 is there waiting for me to d/l and install.

I successfully applied the OTA update, then extracted the boot.img from the full image (both versions matching RP1A.200720.011), patched with Magisk, and then flashed it, but now phone wont boot. Just getting the G startup logo for over 10 min now. Has anyone had success with this method? Is there a better way to do it?

Just updated with no issues, but I'm not rooted yet. Only thing I really want is custom accent color (red), so not sure if it's worth rooting.
Sent from my Pixel 4a using XDA Labs

hate to say it but I think at this point that Magisk 20.4 (Manager 7.5.1) cannot root Android 11 on this phone. I have posted this finding on the rooting thread asking if anyone has had success:
https://forum.xda-developers.com/pixel-4a/how-to/guide-unlock-root-pixel-4a-t4153773/page4

I unrooted, applied update, installed Magisk Canary build, patched boot image from downloaded Factory Image, fastboot flash boot... and have successfully rooted my 4a on w/11.

Well I got an email from Google saying that android 11 was waiting for me to download. So I checked updates and it says my device is up to date. So I guess maybe verizon does hold up updates.

moeava said:
I unrooted, applied update, installed Magisk Canary build, patched boot image from downloaded Factory Image, fastboot flash boot... and have successfully rooted my 4a on w/11.
Click to expand...
Click to collapse
where did you find it? nvrmnd https://github.com/topjohnwu/magisk_files/tree/canary

@tcat007 @fronto
For anyone looking to root, you need magisk canary, latest build at time of writing (20424) works fine for me. Took the OTA from 10 to 11 following the magisk OTA update guide here worked like a charm: https://topjohnwu.github.io/Magisk/ota.html
However, somethings seemed to have changed in 11. For audio apps like jdsp and v4a, you'll need to run this in terminal (only needs done once):
Code:
su -c settings put global hidden_api_policy 1
Also note that sbin is gone too (least on pixel 4a) so v4a app install won't work properly (it's being worked on)

fronto said:
I successfully applied the OTA update, then extracted the boot.img from the full image (both versions matching RP1A.200720.011), patched with Magisk, and then flashed it, but now phone wont boot. Just getting the G startup logo for over 10 min now. Has anyone had success with this method? Is there a better way to do it?
Click to expand...
Click to collapse
You need to use latest canary
Stable doesn't yet support 11 afaik

tthalheim said:
You need to use latest canary
Stable doesn't yet support 11 afaik
Click to expand...
Click to collapse
You only need Canary to create the patched boot file. After it's been flashed, you can run Stable.
Just flash the pre-patched boot file and keep stable:
magisk_patched_sunfish-rp1a.200720.011.img

Yeah I dont like that canary Magisk so I used your advice and flashed the patched boot.img and then went back to stable Magisk. I am a little underwhelmed with Android 11 maybe its just me.
fronto said:
You only need Canary to create the patched boot file. After it's been flashed, you can run Stable.
Just flash the pre-patched boot file and keep stable:
magisk_patched_sunfish-rp1a.200720.011.img
Click to expand...
Click to collapse

good deal...yeah I figured with the pre-patched boot.img, a lot of people could avoid messing with canary alltogether and just keep normal stable.
Agreed 11 does not seem all that revolutionary. ...but all is working well now with no complaints

Archangel said:
Yeah I dont like that canary Magisk so I used your advice and flashed the patched boot.img and then went back to stable Magisk. I am a little underwhelmed with Android 11 maybe its just me.
Click to expand...
Click to collapse
If you’re running boot imaged patched with magisk canary then your running magisk canary
Sent from my iPad using Tapatalk

Yeah brother all I was saying is that I dont like the canary design for Magisk Manager so I went back to stable for manager only.
jrkruse said:
If you’re running boot imaged patched with magisk canary then your running magisk canary
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse

Archangel said:
Yeah brother all I was saying is that I dont like the canary design for Magisk Manager so I wet went back to stable for manager only.
Click to expand...
Click to collapse
Oh ok
Sent from my iPhone using Tapatalk

fronto said:
You only need Canary to create the patched boot file. After it's been flashed, you can run Stable.
Just flash the pre-patched boot file and keep stable:
magisk_patched_sunfish-rp1a.200720.011.img
Click to expand...
Click to collapse
Thank you for the upload. Can this be flashed in magisk? I presume no.
Can you clarify the steps? I'm already on android 10 rooted.
1. Uninstall magisk / Restore image
2.. Download install Android 11 / no reboot
3..... ? Then with patched boot.
Thank you

mustbevick said:
Thank you for the upload. Can this be flashed in magisk? I presume no.
Can you clarify the steps? I'm already on android 10 rooted.
1. Uninstall magisk / Restore image
2.. Download install Android 11 / no reboot
3..... ? Then with patched boot.
Thank you
Click to expand...
Click to collapse
Its not flashed in Magisk. Its flashed using fastboot via a computer connection. With that file, you never need to touch Canary manager.
1. uninstall Magisk but you keep Magisk Manager
2. update to Android 11 via OTA or with full image provided you revise the flash-all to not wipe, or just manually issue each command.
3. make sure your 11 is up and running
4. reboot to bootloader, connect PC
5. fastboot flash boot magisk_patched_sunfish-rp1a.200720.011.img
6. reboot and open regular stable Magisk Manager
enjoy

I've rooted my 4a with magisk with the Aug factory image (android 10). I have the both Titanium Pro and Mybackup Pro - Do either of those programs create an image backup similar to the image I create of my PC using a program like Acronis, so that I could just re-install the Android 10 system if I don't like Android 11? If those programs don't do that is there any program that will do that?

Has anyone else noticed x google enrollment then updating message every (re) boot? I must have done something wrong. I got magisk working nicely. Can install itself, modules, ctsProfile is true, whatevs... But nothing else gets a su toast. Not too worried with it this first week or so.. I'll stab again weekend after next.
Sent from my Pixel 4a using Tapatalk

How to Root OnePlus 8T Build 11.0.6.8.KB05AA

I previously had Magisk installed and rooted my 8T with Build 11.6.5.KB05AA. I followed some instructions on how to install an OTA update. I uninstalled Magisk and ran the OTA update. The instructions advise me to install Magisk on the inactive slot. However, I do not have this option. Instead, I only have Preserve AVB 2.0/dm-verify and Recovery Mode. I don't have TWRP installed so I don't think this will work. I've tried selecting Preserve and not selecting Preserve and selecting Next in Magisk. My next option is to "select and patch a file". I downloaded the bin for 11.0.6.8 and extracted it using payload_dumper and Python and copied it to my phone. However, whenever I try to patch it, Magisk states installation failed.
So, I figured I would finish the install of 11.0.6.8 and rebooted the phone using the update installation reboot button. I figured I'd just start from scratch and root following the original root instructions. My bootloader is already unlocked. I copied the boot.img from 11.0.6.8 to my phone and tried to patch using Magisk (again, I only have the options above). Again, it failed.
What am I doing wrong? Why won't Magisk patch the boot.img file? Shouldn't it work like an original attempt to root it?
Thanks.

rcbjr2 said:
I previously had Magisk installed and rooted my 8T with Build 11.6.5.KB05AA. I followed some instructions on how to install an OTA update. I uninstalled Magisk and ran the OTA update. The instructions advise me to install Magisk on the inactive slot. However, I do not have this option. Instead, I only have Preserve AVB 2.0/dm-verify and Recovery Mode. I don't have TWRP installed so I don't think this will work. I've tried selecting Preserve and not selecting Preserve and selecting Next in Magisk. My next option is to "select and patch a file". I downloaded the bin for 11.0.6.8 and extracted it using payload_dumper and Python and copied it to my phone. However, whenever I try to patch it, Magisk states installation failed.
So, I figured I would finish the install of 11.0.6.8 and rebooted the phone using the update installation reboot button. I figured I'd just start from scratch and root following the original root instructions. My bootloader is already unlocked. I copied the boot.img from 11.0.6.8 to my phone and tried to patch using Magisk (again, I only have the options above). Again, it failed.
What am I doing wrong? Why won't Magisk patch the boot.img file? Shouldn't it work like an original attempt to root it?
Thanks.
Click to expand...
Click to collapse
Make sure you download the latest canary magisk manager. It sound like you might be on an older magisk version.

Qnorsten said:
Make sure you download the latest canary magisk manager. It sound like you might be on an older magisk version.
Click to expand...
Click to collapse
I seem to have the Canary Update channel set already (I thought it was set to Stable, but I guess not). Doesn't that mean I already have the latest Canary build? Manager shows that latest is 6951d926 (21402) (16) but Installed shows 658d74e0 (21402) (16). I assume this means they are different? Install doesn't seem to update it. Maybe grab the latest APK from Github? Thanks.
Later: Can I install it on my phone by download Magisk v21.4 zip and changing extension to APK and installing it? I thought I read everything is now in the zip/apk? Thanks.
FINAL UPDATE: OK, I downloaded the latest MagiskManager, not the one from Canary. I was then able to patch the boot file. The phone rebooted, but it's not working just right yet. None of my icons show up on my home screen, although if I press the recent apps list, it shows a bunch of apps, although selecting one doesn't do anything. I might have to put the original boot image back on just to get it to boot and worry about rooting later. Sigh. It's always something.

Have you tried following this guide it should work perfectly
[Guide] OnePlus 8T EASY ROOT (for all unlocked variants)
DO NOT FOLLOW THIS GUIDE IF YOU HAVE ANDROID 12 Visit this thread for more information ________________________________________________________ CAVEAT I've only tested this on my device running Android 11 (KB2005 / KB05AA), but it should be...
forum.xda-developers.com
In the latest canary apk released today he moved over to that the apk bundle magisk as well and don't need to download it anymore but it shouldn't matter for this case. There is no working custom recovery for Oneplus 8T right now. But if there was and it was updated you would be able to flash the apk.

You did not have to uninstall Magisk. When you would complete the OTA, instead of rebooting you should go into Magisk and select install to inactive slot. As you uninstalled magisk, you're not getting this option. Uninstalling magisk is different from disabling the modules.
Now you need to root it again using the same method given in other thread. Rooting 11.0.6.8 is no different from the rooting process for previous OOS versions.

alanzaki073 said:
Now you need to root it again using the same method given in other thread. Rooting 11.0.6.8 is no different from the rooting process for previous OOS versions.
Click to expand...
Click to collapse
I was able to patch the new boot image and flashed it but when I rebooted nothing worked quite right. None of my apps would run. I could get into settings but couldn't get out of it. I flashed the unrooted boot image and am able to use the phone. I'll try again tomorrow.
The instructions I followed said to uninstall Magisk first. Now wish I hadn't. I suppose worse comes to worse I can figure out how to reinstall 6.5 cause I was able to root that. Thanks for the reply.

Qnorsten said:
Have you tried following this guide it should work perfectly
[Guide] OnePlus 8T EASY ROOT (for all unlocked variants)
DO NOT FOLLOW THIS GUIDE IF YOU HAVE ANDROID 12 Visit this thread for more information ________________________________________________________ CAVEAT I've only tested this on my device running Android 11 (KB2005 / KB05AA), but it should be...
forum.xda-developers.com
In the latest canary apk released today he moved over to that the apk bundle magisk as well and don't need to download it anymore but it shouldn't matter for this case. There is no working custom recovery for Oneplus 8T right now. But if there was and it was updated you would be able to flash the apk.
Click to expand...
Click to collapse
I was looking at a different guide, but will try the one you recommend. I'm aware there is no TWRP for the 8T. I did use that method for my prior OP6. I did patch and flash the patched boot image, but none of my apps appeared on my home page so I flashed the unrooted boot image so I could at least use the phone. Thanks.

rcbjr2 said:
I was able to patch the new boot image and flashed it but when I rebooted nothing worked quite right. None of my apps would run. I could get into settings but couldn't get out of it. I flashed the unrooted boot image and am able to use the phone. I'll try again tomorrow.
The instructions I followed said to uninstall Magisk first. Now wish I hadn't. I suppose worse comes to worse I can figure out how to reinstall 6.5 cause I was able to root that. Thanks for the reply.
Click to expand...
Click to collapse
The instructions definitely lied to you...
Now:
1. Take the 11.0.6.8 boot image
2. Patch it with magisk (latest beta is fine, you don't need alpha anymore)
3. Boot the patched image
4. Install magisk manager in case it's not installed
5. Check it for root, if all is fine do install --> direct install
6. Reboot

Kollachi said:
The instructions definitely lied to you...
Now:
1. Take the 11.0.6.8 boot image
2. Patch it with magisk (latest beta is fine, you don't need alpha anymore)
3. Boot the patched image
4. Install magisk manager in case it's not installed
5. Check it for root, if all is fine do install --> direct install
6. Reboot
Click to expand...
Click to collapse
When you say Boot the patched image, I assume you mean fastboot flash it to the device?
I tried updating Magisk using a beta channel, but then manager wouldn't work at all. I just wouldn't run. So I reinstalled Manager 8.0.7 from the APK I downloaded and now I don't have Canary as an update channel. I keep alternative between having a Magisk icon and a separate manager icon. Weird. I'm trying to only wind up with latest manager installed so I can re-root the phone. Thanks.
LATER: Success! I followed the steps here: https://forum.xda-developers.com/t/guide-oneplus-8t-easy-root-for-all-unlocked-variants.4210775/. And everything worked (which was linked in a prior message). Thanks to all!

rcbjr2 said:
When you say Boot the patched image, I assume you mean fastboot flash it to the device?
I tried updating Magisk using a beta channel, but then manager wouldn't work at all. I just wouldn't run. So I reinstalled Manager 8.0.7 from the APK I downloaded and now I don't have Canary as an update channel. I keep alternative between having a Magisk icon and a separate manager icon. Weird. I'm trying to only wind up with latest manager installed so I can re-root the phone. Thanks.
LATER: Success! I followed the steps here: https://forum.xda-developers.com/t/guide-oneplus-8t-easy-root-for-all-unlocked-variants.4210775/. And everything worked (which was linked in a prior message). Thanks to all!
Click to expand...
Click to collapse
Nope i mean "fastboot boot xxxxx.img"

Kollachi said:
Nope i mean "fastboot boot xxxxx.img"
Click to expand...
Click to collapse
I figured out that's what you meant when I followed the instructions linked in another message. I had never booted that way previously. Thanks!

I am about to root my 8t using the guide someone linked above. My question is.. I'm on ver. 11.0.5.6.KB05AA will I still be able to root if I update or will it take away the ability to root.. also, will it affect the quality of the root ? Thanks in Advance.

Magisk 23.0 compatible with newest stock image RQ3A?

Hi,
I tried to patch the newest stock image 11.0.0 (RQ3A.210705.001, Jul 2021) with Magisk 23.0. Patching of boot.img looks ok, at least it does not complain. Then I flashed the patched image (or booted from it directly, to test).
The boot works, but Magisk does not detect any installation. It wants to install the full app, and then displays "Install n/a".
Did Google change anything which breaks Magisk? If so, is there a safe way to downgrade the phone without loosing data?
Best Regards

So I'm running a Pixel 5 currently, but it sounds like after booting to your patched image, you just need to go grab the Canary version of Magisk from the official GitHub: Magisk 23 Official GitHub.
I've had this happen too after flashing the patched boot image and rebooting back to homescreen.
If you don't install the apk separately it'll try to install Magisk on it's own, but doesn't usually have success in doing so, at least in my experience. So just download the APK from the official GitHub or try the Canary version of Magisk 23. After installing the APK you should be good to go!
If I'm not mistaken, you can grab the APK there or try the "stub-release.apk" for a direct "Canary" version.
The reason I mention the Canary version is because it's like an updated beta, but I've had a lot of success running it myself (Pixel 2XL and Pixel 5).

irxvus said:
Hi,
I tried to patch the newest stock image 11.0.0 (RQ3A.210705.001, Jul 2021) with Magisk 23.0. Patching of boot.img looks ok, at least it does not complain. Then I flashed the patched image (or booted from it directly, to test).
The boot works, but Magisk does not detect any installation. It wants to install the full app, and then displays "Install n/a".
Did Google change anything which breaks Magisk? If so, is there a safe way to downgrade the phone without loosing data?
Best Regards
Click to expand...
Click to collapse
The July release works fine with Magisk. Did you have Magisk installed before updating to the July release? If so, did you hide the Magisk app? In that case, you'll have to unhide the app, remove both instances, and reinstall.
If that is not the case, just complete the install as @ProjectAlly said. There is no need to use Canary, though. Currently Canary and Stable are the same.

Magisk 24.1 no Zygisk option available

I had rooted my Samsung Galaxy Note 8 using TWRP (latest version) and Magisk version 23.0. Everything worked well until 2 days ago when magisk auto updated to version 24.1.
After this, all the options available on 3home page disappeared except option to install magisk 24.1 and magisk app.
I was expecting gydisk OP to be available as seen in various screenshots from internet about magisk 24.1 but unfortunately, didn't see any option to enable it (Screenshot attached).
Thinking the magisk update may gone haywire, reinstalled the stock firmware for my Galaxy Note 8 phone, flashed TWRP, RMM_Bypass_v3_corsicanu.zip, Disable_Dm-Verity_ForceEncrypt_11.02.2020.zip, Magisk 24.1, successfully.
However when rebooted into system, the magisk app still showed no option for Gydisk or any other option except previously mentioned above I.e Install magisk or magisk app.
Have checked & found OEM unlocking and USB debugging is still open.
Now I am lost and wondering where could I be going wrong.
Appreciate very much if someone can guide me in right direction in getting Gydisk option si that I can pass the safety check and hide magisk.

Your screenshot shows that Magisk is not installed.
You only installed the app. Try install in the upper right corner and choose for direct install without patching.

Prof_Shekhar said:
I had rooted my Samsung Galaxy Note 8 using TWRP (latest version) and Magisk version 23.0. Everything worked well until 2 days ago when magisk auto updated to version 24.1.
After this, all the options available on 3home page disappeared except option to install magisk 24.1 and magisk app.
I was expecting gydisk OP to be available as seen in various screenshots from internet about magisk 24.1 but unfortunately, didn't see any option to enable it (Screenshot attached).
Thinking the magisk update may gone haywire, reinstalled the stock firmware for my Galaxy Note 8 phone, flashed TWRP, RMM_Bypass_v3_corsicanu.zip, Disable_Dm-Verity_ForceEncrypt_11.02.2020.zip, Magisk 24.1, successfully.
However when rebooted into system, the magisk app still showed no option for Gydisk or any other option except previously mentioned above I.e Install magisk or magisk app.
Have checked & found OEM unlocking and USB debugging is still open.
Now I am lost and wondering where could I be going wrong.
Appreciate very much if someone can guide me in right direction in getting Gydisk option si that I can pass the safety check and hide magisk.
Click to expand...
Click to collapse

xabu said:
Your screenshot shows that Magisk is not installed.
You only installed the app. Try install in the upper right corner and choose for direct install without patching.
Click to expand...
Click to collapse
Thank you xabu for your reply.
I had tried to install it numerous times using the direct install method as suggested by you but it gives me a "installation failed" message (Screenshot attached).
Also, presuming that my previously installed magisk v 23.0 may not have been uninstalled during the process of auto update to magisk version 24.1 (only 24.1 app installed but not magisk itself not upgraded due to unknown reasons), I reinstalled the app v 23 and uninstalled magisk completely. Frustrated, I installed the stock firmware again, reinstalled TWRP and flashed magisk 24.1. However, the result appears to be same. No magisk installation.
It appears to me that magisk v 23 is not yet completely uninstalled as if I delete this 24.1 app, reinstall app for 23.1 most of the functionality comes back though not all. I still can't hide magisk but it passes safety check.

Also I have tried to uninstall any previous version of magisk using renamed magisk app as uninstall.zip via TWRP. Also I get following message:
"cannot find vbmeta partition, patch vbmeta in boot image.
Removing magisk files."
Now when I go to Magisk app, I get only option to "select and patch a file."
Appreciate if anyone can suggest me a way forward.

Also, I get the vbmeta partition not found error while trying to install Magisk via TWRP (screenshot attached)

I have selected and installed Magisk patched boot image file using ODIN3. Removed TWRP. Tried to install using Magisk app 24.1 but get installation failed due to unable to check signature (screenshot attached).
Request some guidance.

Start here ....
Magisk - The Age of Zygisk.​Your questions are very interesting but too difficult for me to answer. Magisk 24.1 normally replaces the 23 almost automatically .... By uninstalling the module the situation becomes completely different and you should probably start from scratch. In my link "start here" you'll find the place where real specialists are.
Wishing you all the best !

Appreciate your advice.
However, I have reinstalled the stock firmware 3 times since this morning just as to ensure that I start from a clean slate. Also used Adb commands to uninstall any remanants of the previous Magisk manager if at all left there.
However, still stuck with the puzzling question as to where am I going wrong.

Prof_Shekhar said:
Also I have tried to uninstall any previous version of magisk using renamed magisk app as uninstall.zip via TWRP. Also I get following message:
"cannot find vbmeta partition, patch vbmeta in boot image.
Removing magisk files."
Now when I go to Magisk app, I get only option to "select and patch a file."
Appreciate if anyone can suggest me a way forward.
Click to expand...
Click to collapse
Exact same issue for me!

Also for me....same tests that @Prof_Shekhar have done

Prof_Shekhar said:
I had rooted my Samsung Galaxy Note 8 using TWRP (latest version) and Magisk version 23.0. Everything worked well until 2 days ago when magisk auto updated to version 24.1.
After this, all the options available on 3home page disappeared except option to install magisk 24.1 and magisk app.
I was expecting gydisk OP to be available as seen in various screenshots from internet about magisk 24.1 but unfortunately, didn't see any option to enable it (Screenshot attached).
Thinking the magisk update may gone haywire, reinstalled the stock firmware for my Galaxy Note 8 phone, flashed TWRP, RMM_Bypass_v3_corsicanu.zip, Disable_Dm-Verity_ForceEncrypt_11.02.2020.zip, Magisk 24.1, successfully.
However when rebooted into system, the magisk app still showed no option for Gydisk or any other option except previously mentioned above I.e Install magisk or magisk app.
Have checked & found OEM unlocking and USB debugging is still open.
Now I am lost and wondering where could I be going wrong.
Appreciate very much if someone can guide me in right direction in getting Gydisk option si that I can pass the safety check and hide magisk.
Click to expand...
Click to collapse
The same thing happened to me so i tried and tried and tried for like 4-5 hours after reinstalling multiple times the firmware so i gave up and came to the conclusion that its not supported yet for a few phones like the Note8 (SM-N950F ~ my version of the phone).So the only thing you can do rn is to stick to version 23.0 then go to settings and change the channel to custom channel and paste this link "https://raw.githubusercontent.com/t...304e59f631280cc26ccc6d40a7cf04f7f37/beta.json" in there so the magisk version doesn't update itself or you update it by accident

Beast-chan said:
The same thing happened to me so i tried and tried and tried for like 4-5 hours after reinstalling multiple times the firmware so i gave up and came to the conclusion that its not supported yet for a few phones like the Note8 (SM-N950F ~ my version of the phone).So the only thing you can do rn is to stick to version 23.0 then go to settings and change the channel to custom channel and paste this link "https://raw.githubusercontent.com/t...304e59f631280cc26ccc6d40a7cf04f7f37/beta.json" in there so the magisk version doesn't update itself or you update it by accident
Click to expand...
Click to collapse
@Beast-chan
Hope you were able to install Magisk 24.1 Canary version without any further issues.

Prof_Shekhar said:
@Beast-chan
Hope you were able to install Magisk 24.1 Canary version without any further issues.
Click to expand...
Click to collapse
tbh i didnt try the Canary version...does it work or why do you ask?

Beast-chan said:
tbh i didnt try the Canary version...does it work or why do you ask?
Click to expand...
Click to collapse
@Beast-chan
Definitely. I have installed Magisk 24.1 Canary using patched AP file from stock firmware, and then reinstalled the Magisk 24.1 Canary version. It has been working without any issues since then.
Don't forget to install universal safetyNet Fix.
Let me know if you run into any issues.

Prof_Shekhar said:
@Beast-chan
Definitely. I have installed Magisk 24.1 Canary using patched AP file from stock firmware, and then reinstalled the Magisk 24.1 Canary version. It has been working without any issues since then.
Don't forget to install universal safetyNet Fix.
Let me know if you run into any issues.
Click to expand...
Click to collapse
ok ty i will try it