Related
Hi Everyone,
Sorry for the discombobulation of this post, but I have been adding to it non stop.
This thread covers all I have learnt from this model phone;
Root procedures for both Gooapple and iorange GT-6
ADB access (no USB adb so need to use over WiFi), - ADB WORKING NOW!!
Secret reset button location,
Recovery mode,
Download mode,
Drivers,
How to (and not to) theme framework-res.apk with uot kitchen
Flash tool
Change Boot animation
Upgrade External storage.
GPS server change.
Battery Info.
Serial No. Location
Quick access to the Camera
Mayiandjay on the Gooapple 3g on Youtube
Creating an extracted system.img
Dump recovery.img / boot.img
Alternate ROM dumping method (Thanks Dastin1015)
Flash a recovery image (Thanks Dastin1015)
Full Market on the Goo
ROOT;
I have purchased one of these and they are quite easy to get root using Visionary+ for temporary root option to push su and Busy Box, then use Z4root for permanent # works quote well and easy and
Checkout the rooting video here (http://www.youtube.com/user/mayiandjay) for an easier way just using z4root.
ADB OVER Wi-FI;
once you can get adb to recognise it (using terminal emulator on the phone
"setprop service.adb.tcp.port 5555"
then
"stop adbd"
"start adbd"
from there you can use your pc to run
"adb connect *insert IP address here*"
UPDATE: I found how to get ADB access over USB... I just insta;;ed the PdaNetA302.exe file from http://www.alcatel-mobilephones.com/global/content/view/full/25287
and then disconnected when advised to, reconnected when advised to, then BAM!!! working ADB..
I wish I had known about this a week ago...
From here you can have access to all supported adb commands including shell for # access, also for pushing and pulling files from the goo,
UOT KITCHEN; (Be careful dangerous)
I used the "ADB PULL" command to pull "/system/framework/framework-res.apk"
from the device, I then used the UOT Kitchen to modify it to my liking once I got the uot .zip file, I extracted the framework-res.apk file and used "adb push" to overwrite the one inside /system/framework/ dir.
(use a pc to push, not the phone explorer copy paste... Lol I bricked mine by using the file explorer, see the rest of the post for more info....)
RECOVERY MODE, DOWNLOAD MODE and BOOT ANIMATION;
some other usefull info is that you do not have to wait for the phone to run dead if you use the wrong key combo whilst booting ( trying to get into recovery hold home button whilst turning on then 5 seconds after "gooapple" appears let go of home and then press it again) you will get recovery console, where you can change the boot animation to the static apple or the gooapple animation, you can also do a factory reset or clear cache, from here you can also run an "update.zip" file but unfortunatly after i 1/2 bricked mine i stupidly did a factory reset and lost rw on /system (loosing bus box and su) (CRAP!!!) i was using the above mentioned method to use the "uot kitchen" to retheme the framework-res.apk file of the goo, and it was working fine when pushing the framework-res.apk to the phones /system/framework/ dir using a pc, but I got lazy and stupidly did a copy / paste using the phone to return to the original framework-res.apk (i know dumbass right) and then she rebooted to infinate bootlooping (F#@K!!!) I can now get into recovery mode and unfortunatly I cannot get my update.zip that pushes busybox and su etc to sign properly so that I can copy via update.zip the backed up version of framework-res.apk back to the now read only /system/framework dir.... (possible Brick anyone?)
SECRET (hidden) RESET BUTTON;
So... continuing on... to reboot the phone if it locks up and stops responding, you need either the original simtray pin or something like a multimeter probe and stick it down the headphone jack, down there there is a hard reset button, (get a torch and look for yourself if you don't believe me) hope this helps people...
DRIVERS;
Also I downloaded the qualcomm MSM drivers from 4shared and can now connect to the phone cos I noticed that if you boot the phone using the down volume key (i think) with the USB connected you can get nothing come up onscreen on the phone but the PC picks up a new device, the 4shared drivers worked but unfortunately that's where my knowledge stops...
FLASH TOOL;
I downloaded the flash (or google translated "brush") tool from mobileuncle but untill I find someone sharing the rom, or system.img it is usless to me...
UPGRADING EXT. STORAGE;
Something interesting for the rest of you is that the Gooapple 3g ( shows as A4-3G) and the preproduction iOrange Gt-6 (also shows as A4-3G) seem to look the same on the inside, I have both ( but liked the good ol F#@K you Apple, with the apple eating an android boot animation and apple in a android symbol on the back of the device ) I have opened both of them up (use a very small screwdriver on the screws between the speakers and 30pin dock connector on the base, remove these screws and slide the back plate up towards the power button (gentle no to break the retaining nuts on the back plate), from here you can undo the bit of tape and lift the battery up out of the way ( its soldered in so be careful, seeing as its always powered and easyier to short something out ) then next to where the battery sits you will see the back of a micro SD card (this is you external storage) if you get your nail and press on the back of it you will notice it is held by a spring retainer and will pop out a bit, from here press it in half way again with your nail and slip your nail off it, releasing the spring tension, flicking the micro sd card out into the casing (and hopefully not across the room)
you should now find either a 4GB, 8GB, 16GB or possibly a 32GB micro SD card came out depending on the model you chose, if you chose a 4GB or 8GB like i did you can replace it with an inexpensive 16GB Micro SD card put it back together and reboot, This is how I have tried copying my "update.zip" with Busybox and Su files (see above, that wont sign!!! GRRRR) the recovery console recognises the file but says signature authentication fail....
I could sign my "update.zip" for my framework-res.apk file but without Busybox or system RW it is useless.. it passes authentication but without rw on system it is useless....
GPS SERVER CHANGE;
Also, using faster fix off the market (need root) you can change the GPS server for better GPS performance.
BATTERY INFO;
Stamped on the Battery is
PL402874 1000mAh
3.7V 3.7WH
SERIAL NO. LOCATION.
Under the back cover there is a Version (mine is v2.3) and Serial number sticker
QUICK ACCESS TO THE CAMERA
Double click Home on the unlock screen to have quick access to the Camera.
USEFUL YOUTUBE VIDS
Check out mayiandjay on youtube (http://www.youtube.com/user/mayiandjay), he has done videos covering the stuff I am trying to explain, Thanks deepakpitrola333 for pointing this out
CREATING A EXTRACTED SYSTEM AS SYSTEM.IMG
for windows pc,
Go to http://db.tt/GAyvuDE (thanks Dastin1015) download and extract to your sdk/platform-tools folder
Rename mkfs.yaffs2.arm to mkfs.yaffs2 (delete the .arm extension)
open up command prompt (if you don't know how to do this in your current windows environment by now then just give up now)
change dir to the platform-tools dir in the sdk,
TYPE: adb push mkfs.yaffs2 /data/misc/mkfs.yaffs2
then pick up your shinny gooApple device;
open root explorer and navigate to mkfs.yaffs2 select and hold, change to have execute permissions
Back on the PC;
adb shell
su
# cd /data/misc
# ./mkfs.yaffs2 /system /sdcard/system.img
# exit
adb pull /sdcard/system.img ./system.img
I got a 176Mb system.img with "Build ok."
DUMP RECOVERY and BOOT IMAGES
you'll need dump_image from http://db.tt/9EANtEX (Thanks Dastin1015)
copy to your platform-tools folder in your androidsdk dir
do the same as above and push to /data/misc
then as before, change permissions of dump_image in root explorer to have execute. reboot device
Then you can run command prompt
go to your sdk platform-tools directory
run;
adb shell
cd data/misc
./dump_image boot /sdcard/boot.img
./dump_image recovery /sdcard/recovery.img
exit
adb pull /data/misc/boot.img ./boot.img
adb pull /data/misc/recovery.img ./recovery.img
ALTERNATE ROM DUMP METHOD (Thanks Dastin1015);
To do any flashing to the phone you must be rooted.
Rooting:
1) Download z4root and hit the permanent root option: http://db.tt/Bltsa73
2) Once rebooted you will have root.
Dump ROM:
~Prerequisite is that you have root~
{Non ADB method}
1) Download romdump and place it on the root of your SD card: http://db.tt/kXTaCDF
2) Download Terminal Emulator from the Market if you haven't already.
3) Open Terminal Emulator and issue these commands:
Code:
$ su
# cp /sdcard/romdump /system/bin
# chmod 747 /system/bin/romdump
# romdump
4) Now on your SD card under the romdump folder you will find you recovery.img, boot.img and system.tar. Backup these files to your computer for safe keeping.
{ADB method (Must have Android SDK installed)}
1) Open up command prompt and issue these commands:
Code:
C:\Users\Your_Name> cd ..
C:\Users> cd ..
2) Navigate to your installed Android SDK (Mine is under the Program Files (x86) folder):
Code:
C:\> cd Program Files (x86)
C:\Program Files (x86)> cd Android/android-sdk/platform-tools
3) Connect your device to your computer and make sure you have USB Debugging enabled on your phone.
4) Issue this command to verify that your computer recognizes your phone:
Code:
C:\Program Files (x86)\Android\android-sdk\platform-tools> adb devices
5) If you see your phones serial then it is connected.
6) Download romdump and place it in the platform-tools folder: http://db.tt/kXTaCDF
7) Issue these commands:
Code:
C:\Program Files (x86)\Android\android-sdk\platform-tools> adb push romdump /system/bin
C:\Program Files (x86)\Android\android-sdk\platform-tools> adb shell chmod 747 /system/bin/romdump
C:\Program Files (x86)\Android\android-sdk\platform-tools> adb shell
# romdump
you should get the following;
Android ROM dumper v0.82b
(c)2011 Sebastian404
Device : GOOAPPLE 3G QUALCOMM-Android2.2.3-IOSUI-eng.autobuild.20110729.144151
Creating required files... done.
Opening mtd table... done.
Dumping kernel config... done.
Dumping boot partition... done.
Dumping recovery partition... done.
Dumping system partition... done.
Creating Checksums... done.
Cleaning up... done.
8) When done your ROM dump will be in the romdump folder on your SD card.
/sdcard/romdump
boot.img
checksum.md5
config.gz
recovery.img
system.info.gz
system.tar
DONE.
INSTALL CLOCKWORK RECOVERY (orange lantern recovery) ( Tested on my GT-6, that is basicly the same as the gooapple but has the apple symbol on the back, and now my Gooapple 3g,both successfully)
Flashing custom recovery image:
{Non ADB method}
1) Download flash_image and place it on the root of your SD card: http://db.tt/flHRxiG
2) Download recovery.img to the root of your SD card: http://db.tt/uy56zhj
3) Open Terminal Emulator and issue these commands:
Code:
$ su
# cp /sdcard/flash_image /system/bin
# chmod 747 /system/bin/flash_image
# flash_image recovery /sdcard/recovery.img
4) If you see a bunch of successful on your screen then it has flashed properly.
{ADB method}
1) Open up command prompt and issue these commands:
Code:
C:\Users\Your_Name> cd ..
C:\Users> cd ..
2) Navigate to your installed Android SDK (Mine is under the Program Files (x86) folder):
Code:
C:\> cd Program Files (x86)
C:\Program Files (x86)> cd Android/android-sdk/platform-tools
3) Connect your device to your computer and make sure you have USB Debugging enabled on your phone.
4) Issue this command to verify that your computer recognizes your phone:
Code:
C:\Program Files (x86)\Android\android-sdk\platform-tools> adb devices
5) If you see your phones serial then it is connected.
6) Download flash_image and place it in the platform-tools folder: http://db.tt/flHRxiG
7) Download the recovery.img and place it on the root of your SD card: http://db.tt/uy56zhj
8) Issue these commands in command prompt:
Code:
C:\Program Files (x86)\Android\android-sdk\platform-tools> adb push flash_image /system/bin
C:\Program Files (x86)\Android\android-sdk\platform-tools> adb shell chmod 747 /system/bin/flash_image
C:\Program Files (x86)\Android\android-sdk\platform-tools> adb shell
# flash_image recovery /sdcard/recovery.img
9) If you see a bunch of successful on your screen then it has flashed properly.
boot into recovery, hold home whilst powering on, after 5 long seconds, let go of home and then push home again, you will need to put the volume/menu-back toggle to "volume" mode and according to deepakpitrola333, you need to cycle the list 3 times using volume to allow selection.
Video by mayiandjay;
http://www.youtube.com/watch?v=B_dX9Ruoljo
ENABLE FULL MARKET ON THE GOO
Thanks to Smith, we can have the full google market on our Goos
http://forum.xda-developers.com/showthread.php?t=1133702
IF I OR ANYONE ELSE EVER HELPS YOU, PLEASE CLICK THANKS... Its not that hard....
Done.
CHEERS!!! - KEG.
Thanks for info on the gooapple, its good stuff.
Any idea on how to do any of the following:
- restore original recovery screen
- get a clockworkmod recovery image to work
- do a nandroid backup
i have managed to get the applestyle home apks and the keyboard and stuff and so want to install another rom. I flashed a random clockworkmod image but now i dont get any recovery screen at all, its gets stuck on apple every time on every button combo/method.
if its not too much to ask, could you check if you can run fpse the psx emulator on your gooapple, it crashes to home straight after loading a game even tho i have a bios. psx4droid works but is choppy, similarly specd phones like the wildfire s and legend can play fpse games like ff7 very well.
Gooapple GPS
Do you now how to acivate the GPS on the gooapple.
Have this phone a GPS chip like SiRF III chip?
Is it possible to use it with navigation software?
Did you purchase it? If you did that, please, send me link to rom dump after you dump it or you know already existing link?
Sent from my IDEOS S7 Slim using XDA App
this phone has a sirf III and installing a gps program makes the gps work.
i cant dump the rom without getting a clockworkmod recovery image that works for this phone, unless you know of a way jon2555.
Hey guys, the best way I found to toggle gps on (because it does not show up in networks) is by installing go launcher so you get a shortcut to it in your apps, the press home and set applestyle as default again, then go through your drawer and select the go launcher shortcut, from there add the power control widget, from there you can toggle gps...
Also I have been nagging the people at the gooapple factoryand they advised they may add a downloadable firmware upgrade soon...., fingers crossed as mine is currenly half bricked, I got access to the fastboot by downloading the microsoft mobile drivers update, that lets fastboot recognise it when you reset with the vol down button, but need to read up on how to use it....
I had a quick readup on fastboot commands, and I have written an update script (The one that I cant sign), and I'm going to try to run it with fastboot as my limited and unexperienced understandung is that through fastboot you dont need signed updates...., unfortunatly I left my goo at work on wednesday and I was in Sydney all day today, so i wont be able to try it out untill I return to work in freezing Canberra tomorrow... Fingers crossed, and if I can successfully get it working again I will try to find a way to dump the partitions and make an update.zip that rewrites all of /system (if possible), so next time i kill it, I may have a better chance recovering from my mistakes (or pure lazyness....)
jon2555, no rom yet, but Hat007 did previously do an app dump of all the apps on gooapple 3g here,
http://forum.xda-developers.com/showthread.php?t=1245655
(thanks hat007)
and as deepakpitrola333 said, until somebody can put a working clockwork on it, we are out of luck regarding nandroid backups.... and my goo is currently bricked so i cant do much with it, and i gave my gt-6 to my daughter already, so no chance of getting that back......
Gooapple Firmware ROM Update
Hi All,
I'm New to this. Is there going to be a ROM or Firmware Update? if so how is it going to be done? Which Website??
I've bought mine from Android-Sale.
Has anyone else bought there's from Android Sale?
Also Is there a FIX to Make the Unlock Slider Back to English without the Stupid Chinese Symbol TXT??
Also Is anyone having Trouble with there Built-In GPS?? I cant get mine to Work??
I Look Forward to your Comments.
Cheers.....
hey spookie,
kegatron has said to toggle the gps from go launcher, which enables an android style interface with power options for bluetooth, gps, wifi etc by widget or otherwise. I assume you can do this with the stock froyo launcher too.
Home key can select the launcher after a third is installed.
I got mine from fastcardtech as they gave a discount over android sale, however it will be gooapple themselves releasing the update and or rom in the future.
With so many units sold, there is gonna be stuff up soon.
If someone knows how to make thier own clockworkmod recovery, the rom can be uploaded by anyone with the phone. I have no clue who to ask to do this tho.
The chinese in the lock screen is not something i know how to change but as i said a stock froyo launcher and lock screen can be used instead. Helps with the long icon name problem too.
If its not too much to ask can you check if fpse, the psx emulator, works on your phone. It crashes straight away on mine but all psx4droid versions work but as it is known, psx4droid is considerably slower, like 10-20 fps slower making final fantasy games run 50fps max and 35-40 normally which is too choppy.
I hope what i have said helps, gps isnt on all the time so try to toggle it like keg said and if you know anyone who can write custom recovery images, get them over here
i also assume you have rooted to get rid of all chinese from system icons/folders
Hey Spookie,
With the GPS, I was still using the applestyle launcher but one of the good things about go launcher is the fact that it has a app link in your app drawer, meaning you can select the applestyle launcher as the default and still have access to go launcher without too much hassle (just select it in the apps on your home screen)
So with that said I assume you have root?, if not... get it... Lols..
from there you can get rid of the standard Chinese crud that I cant read like baidu input or whatever its called, QQ (whatever that is...) etc. using Titanium backup (CAREFUL FOR WHAT YOU UNINSTALL, and batch backup everything first!!!), I'l put up a list of what can be uninstalled safely once I get mine working again. and you can fix the server your GPS is looking for by using FasterFix from teh market (you need root for this)
And the gooapple webpage is quite easy to find.... I just googled gooapple and funnily enough the webpage's name wasn't too cryptic (its www.googapple.com lol) just use the google chrome browser to automaticly translate the Chinese and for most of the bad translations you can still work it out..
Hope this helps...
BTW, I'm looking into rewriting my update.zip file for my framework-res.apk file as the scripting is different using fastboot and I need to read up on it.. give me time
I need to work out what needs to be in the android-info.txt and android-product.txt files....
Hi Guys,
Thanks for all you Help & input.. However I'm Very Confused and Lost?? Yes I've installed Z4Root.
But Now That I've installed this App. How can I BACKUP the Whole ROM as it is before I Start to Uninstall all thoses Chinese APPs etc??
Also What Input Keyboard do I install? Which one is the Chinese Keyboard??
I'm Wanting to keep the Stlye of the Phone as it is when I bought it but wanting to Take Out the Chinese Junk, and Install just want I want in English.
As for the GPS, is there a Way to Keep it always Switch on From First turning on the Phone??
I do hope you dont think I'm a Stupid Person??
I dont want to Brick or Destroy this Phone?? Just want the Chinese Junk Out and GPS & the Unlock Slider Fixed?? Do hope they Bring out Firmware or ROM Update? I'm picking it's going to be on here once it's Relesed??
Look Forward to your Comments.
Regards
Spookie...
Gooapple Camera & YouTube
Hi Again,
I was meant to also ask in my Last Post
Can anyone if Possible post a Photo on here taken Directly off there gooapple device? Ans is it a True 3.2mb Camera? And Also is the Front Camera 1.3mb?? I'd be glad to have a look and you image....
I cant get youtube to work with the Youtube App? I've tried all sorts of Differnt Apps (apk files), and still NO Luck with youtube??
Any Thought's Or Comments??
Thanks...
SpookieNZL
Hey Spookie,
Sorry champ, if I misdirected you, what I ment by batch backup all the apps first was to do with "Titanium Backup" from the market, it requires root access
to test for correct root access, you should get # when you type su in a terminal emulator.
try this once you have it installed,
Download the Iphone keyboard from the market, the go to settings, keyboard, and enable the iphone keyboard (tick box) then, find any text box and press and hold the box untill "input method" comes up select iphone keyboard
Once you have the iphone keyboard working, you can then delete the baidu (or whatever it was called) keyboard, by opening Titanium backup, accept super user access, then go to "backup / Restore" then press the menu key (vol up) then select "Batch" then select "backup all user apps +system data", then once completed, you can then go back to "backup /restore" and find Baidu input and select it, and then "uninstall"
Congrats you have now deleted the Baidu input,
I would recommend NOT uninstalling anything that you don't know if it is crucial or not, as if you delete the wrong thing you can get major "Force close" issues and make the phone 100% unusable until a ROM has been released to re-write the partition and start again...
With the Camera, I will post a heap of photos up when I get mine working again, I have taken lots of photos of pulling it apart and upgrading storage etc. I am in the progress of putting all the info from this post into a full guide with photos of step by step how to do everything that I know of, as I can't find anything from anyone else posted on the net regarding most of the things i have covered, I might just step up to the plate and do it
With Youtube, I installed the tubemate app from market, worked fine for me.., try it an let me know
Hope this helps!!!
Also, for those who didn't know, when you have the slide to unlock screen, if you double click home you will get a camera icon pop up (on an Iphone / ipod this is to access the music menu) that way you can get quick access to the camera to take a photo
hey keg why are you telling him to uninstall baidu input, on its last setting it is a perfect iphone input keyboard completely in english, the one on the app market is not good looking or accurate.
also, on youtube this guy, mayiandjay, has good videos on some of the stuff your trying to explain so maybe skip this to save time.
lastly i hope you get your phone back to working, as i have the phone working and sort know what im doin, feel free to ask for anything from it.
spookie, ill get some daylight pics up in the morning, at night the camera looks more grainy but is still good.
Hi deepakpitrola333,
Sorry I never really gave the Baidu input a real go, I found it slow unresponsive, and sometimes would revert back to converting whatever I was trying to write into Chinese, so it got the ass, I did get swype working on it, but I'm used to my Galaxy S and didn't find it that good on this device.
I suppose my guide to deleting the Baidu input was reversable if you did it step by step, you can go into titanium backup, go to backup / resore, and go right to the bottom, select baidu input that should have a line through it, and select restore.
BAM!!! Bauidu is back, though you will have to enable it again through the keyboard s option in settings, then press and hold a text box and select it again....
Sorry for the confusion.
yea it took me a while to set it to how i like, iphone style full english with predictive, wild guesses from the options list when holding down the circle key.
it is faster than the 4-5 keyboards ive used and looks the best in caps with no numbers to ruin the look.
it wont help you keg because yours is unfortunately bricked but spookie, on baidu after getting the keyboard up (press home a few times), hold the circle (world?) key, then select last, (keyboard will close) then hold bottom left key after getting it back up then first option, then second to last for predictive or last for non predictive.
Got the Goo Going again!!!
WOOOO!!! I'm soo happy
here's how I did it, (and I will add this to the first post)
When my device was bootlooping (the gooapple animation was playing over and over) I connected it to my computer, noticed that once again I got the unknown devices (4x qualcomm HSUSB interface) pop upagain and after giving up trying to find the Qualcomm HSUSB Driver prviously I decided to go on the hunt as this was close to my last resort before giving up for the day, well guess what!! I found it!!
I downloaded a file called PdaNetA302.exe and it installed the correct drivers for me!!! from there I could finally see the device in the Android Debug Bridge (especially whilst it was was booting!!) from there I could push the framework-res.apk into the /system/framework/ dir on the goo!!! WOO HOO!!
I'l play with it for a while and start ripping everything off it tonight, see what I can do about making a backup of some sort.... or if anything a listing of all dirs and files in each partition.
Thanks everyone who is reading this for your support during these "goo-less" times
Hi! I am the youtube member "mayiandjay" that has been posting some videos on how to work around with the gooapple 3g.
Recently I tried flashing clockworkmod recovery but now I get stuck on the "gooapple" logo.
How can I restore the original recovery Image or get one that works for this unit. ANY HELP WILL BE GREATLY APPRECIATED!! THANKS IN ADVANCE.
Hi! I am the youtube member "mayiandjay" that has been posting some videos on how to work around with the gooapple 3g.
Recently I tried flashing clockworkmod recovery but now I get stuck on the "gooapple" logo.
How can I restore the original recovery Image or get one that works for this unit. ANY HELP WILL BE GREATLY APPRECIATED!! THANKS IN ADVANCE.
Hi everybody,
i try to find tutorial to root my onda v10 pro tablet and then install a custom rom on it but i found nothing. Did someone change the official ROM, if yes can i have some help?
Thanks a lot.
locss said:
Hi everybody,
i try to find tutorial to root my onda v10 pro tablet and then install a custom rom on it but i found nothing. Did someone change the official ROM, if yes can i have some help?
Thanks a lot.
Click to expand...
Click to collapse
I also need to root in my v10 pro wave, and find custom rom, have if someone helps us, thanks
impossible to root or unlock
berti hispano said:
I also need to root in my v10 pro wave, and find custom rom, have if someone helps us, thanks
Click to expand...
Click to collapse
Hello, i also need to root this tablet, i want to enable remote control because i will give it to my grand mother. Any help on how to unlock bootloader or root the tablet will be apreciate ! THank you !
I found this thread : 4pda.ru / forum / index.php?showtopic=819301&st=80#entry64752617
They say to do the following command but i have "permission denied on all commands" !
Process:
- Unpack Magisk-v13.6 (1360) .zip
- In the unpacked folder, load the file boot-verified.img from the firmware and rename it to boot.img . And also rename the arm64 folder to magisk_inject
- Once again we make sure that the following folders and files are in the prepared folder: META-INF, boot.img, common, magisk_inject .
- Open the terminal from this folder (for win7 holding the shift, call the context menu and select Open command window here) and enter 5 lines of commands, one at a time (I used to copy-paste):
adb shell "rm -rf / data / local / tmp / *"
adb push META-INF / com / google / android / update-binary common magisk_inject boot.img / data / local / tmp
adb shell "cd / data / local / tmp / magisk_inject; mv ../common/*.; chmod 755 *; sh ../update-binary indep boot_patch.sh ../boot.img; mv ../bin/busybox busybox "
adb pull / data / local /tmp/magisk_inject/new-boot.img
adb shell "cd / data / local / tmp; rm -rf * .img magisk_inject / *. img update-binary bin common"
THank You !
ekirock said:
Hello, i also need to root this tablet, i want to enable remote control because i will give it to my grand mother. Any help on how to unlock bootloader or root the tablet will be apreciate ! THank you !
I found this thread : 4pda.ru / forum / index.php?showtopic=819301&st=80#entry64752617
They say to do the following command but i have "permission denied on all commands" !
Process:
- Unpack Magisk-v13.6 (1360) .zip
- In the unpacked folder, load the file boot-verified.img from the firmware and rename it to boot.img . And also rename the arm64 folder to magisk_inject
- Once again we make sure that the following folders and files are in the prepared folder: META-INF, boot.img, common, magisk_inject .
- Open the terminal from this folder (for win7 holding the shift, call the context menu and select Open command window here) and enter 5 lines of commands, one at a time (I used to copy-paste):
adb shell "rm -rf / data / local / tmp / *"
adb push META-INF / com / google / android / update-binary common magisk_inject boot.img / data / local / tmp
adb shell "cd / data / local / tmp / magisk_inject; mv ../common/*.; chmod 755 *; sh ../update-binary indep boot_patch.sh ../boot.img; mv ../bin/busybox busybox "
adb pull / data / local /tmp/magisk_inject/new-boot.img
adb shell "cd / data / local / tmp; rm -rf * .img magisk_inject / *. img update-binary bin common"
THank You !
Click to expand...
Click to collapse
Thank you for your post, but where can we find some custom rom for this tablet?
Thank you.
android 6.0
reddit.com/r/androidtablets/comments/6v4szs/onda_v10_pro_play_store_doesnt_work_out_of_the/
haven't tried yet but attempting tonight
Thanks Gregory, but is it possible to install a custom rom based on android 7?
system.img is corrupt for all . Has anyone successfully been able to flash this firmware to their devices so far??
Edit: my bad, cannot use 7 zip to extract, use ext4 extractor instead
Success!
Hi there
I tried dozen of methods to root this device and always failed.
I was ready to give up when I decided to give a last chance to me.
I have tried the Hovatek's brilliant fastboot way with magisk manager but always stucked on the critical last point.
OK, follow these intructions
#extrack Magisk 13 on a PC folder
# copy the files in common folder on sdcard in your device
#copy the original boot.IMG of your firmware on the sdcard
#open your device install and run Magisk manager app
#under this app install Magisk and chose .img
#go to sdcard and select your boot.img for patching
#look at the terminal if the job is done
#find the patched image in the Magisk folder at the main storage
#flash it with sp flash tool
#enjoy and forgive me for my basic English
PS. I'm looking for twrp or cwm for this device.
Please inform me if you know something about.
cosbrav said:
Hi there
I tried dozen of methods to root this device and always failed.
I was ready to give up when I decided to give a last chance to me.
I have tried the Hovatek's brilliant fastboot way with magisk manager but always stucked on the critical last point.
OK, follow these intructions
#extrack Magisk 13 on a PC folder
# copy the files in common folder on sdcard in your device
#copy the original boot.IMG of your firmware on the sdcard
#open your device install and run Magisk manager app
#under this app install Magisk and chose .img
#go to sdcard and select your boot.img for patching
#look at the terminal if the job is done
#find the patched image in the Magisk folder at the main storage
#flash it with sp flash tool
#enjoy and forgive me for my basic English
PS. I'm looking for twrp or cwm for this device.
Please inform me if you know something about.
Click to expand...
Click to collapse
Just did it. it works, though it was horrible. magisk 13 is too old and I could not find how to patch the boot.img option.
so I managed to do with the common files from 18.1 and the patching complete.
then I re-flashed everything and unfortunately it reset the tablet, but worked and I'm rooted now.
As you, waiting to the confirmation twrp exist, and if so what version.
cheers
cosbrav said:
Success!
Hi there
I tried dozen of methods to root this device and always failed.
I was ready to give up when I decided to give a last chance to me.
I have tried the Hovatek's brilliant fastboot way with magisk manager but always stucked on the critical last point.
OK, follow these intructions
#extrack Magisk 13 on a PC folder
# copy the files in common folder on sdcard in your device
#copy the original boot.IMG of your firmware on the sdcard
#open your device install and run Magisk manager app
#under this app install Magisk and chose .img
#go to sdcard and select your boot.img for patching
#look at the terminal if the job is done
#find the patched image in the Magisk folder at the main storage
#flash it with sp flash tool
#enjoy and forgive me for my basic English
PS. I'm looking for twrp or cwm for this device.
Please inform me if you know something about.
Click to expand...
Click to collapse
Followed the same but with latest Magisk and SP flash tools. It works and now my Onda V10 pro is rooted.
If you guys need latest google play services to be running on Onda V10 Pro. Please use LuckyPatcher after installing Magisk to install latest google play services(arm64-v8a).
Install LuckyPatcher and provide super user access.
1. Uninstall existing google play services using LuckyPatcher.
2. Download arm64-v8a compatible latest google play services and install as a system app using LuckyPatcher. After that it will ask for reboot and after rebooting it will show android apps updating loader for few mins.
3. Then you can use any apps that require latest google play services. For me youtube was not working before but now its working.
Can anyone who is rooted and has access to terminal on the phone dump their persist partition and upload a copy here please?
It needs to be from a Pixel 3 Device preferably running Android 10 Oct 5 Update.
To execute the dump please follow the steps below:
Open Terminal Emulator on Rooted Pixel 3
type su
grant Super User permissions
then type: dd if=/dev/block/by-name/persist of=/sdcard/persist_backup.img
this will copy your persist partition to sdcard and name it persist_backup.img then proceed with uploading it.
Reason I'm looking for this particular partition is since I was affected by the Android 10 Bug which affectes sensors I have deleted my persist partition in the process of trying to fix the sensors issue myself.
Thanks in advance!
N.B. the persist partition does not contain any sensitive/private data, it contains the factory calibration files for the sensors in the device (gyroscope, accelerometer, proximity etc...)
Thanks again!
I was in the process of rooting when the update was trying to run. Now I keep getting an install failure and can't seem to get any way to fix it.
Where is this update stored so I can delete it or can I get some advice on how to clear it so I can get it to try again?
I can't find the update for download anywhere :/
Not thing about file/cache. Incremental OTA need unroot frist.
Looking for the full installer package file for
11.0.8.12.KB05AA.
rezapatel said:
Looking for the full installer package file for
11.0.8.12.KB05AA.
Click to expand...
Click to collapse
Same let me know if you find it lol
OK good news I got myself sorted!
1. What I did was use "Oxygen OS updater" (can be found on playstore) with advanced mode enabled and downloaded the latest OS (11.0.8.11.)
2. Use local upgrade under settings to install 11.0.8.11 and restart. This will remove root but not user data or settings.
3. Check for and install update 11.0.8.12 under settings and it should install fine no issues.
4. Re root using your chosen method.
5. Done!
Interesting. How did you get the boot file for x.12? Isn't that required for rooting..
rezapatel said:
Interesting. How did you get the boot file for x.12? Isn't that required for rooting..
Click to expand...
Click to collapse
Boot modified recovery with ADB function, dump boot_a or boot_b, Magisk patch.
ULTRAJC said:
Boot modified recovery with ADB function, dump boot_a or boot_b, Magisk patch.
Click to expand...
Click to collapse
What they said
ULTRAJC said:
Boot modified recovery with ADB function, dump boot_a or boot_b, Magisk patch.
Click to expand...
Click to collapse
Any guide for this?
DroidFreak32 said:
Since we don't have TWRP yet for our 8T, having ADB enabled on the stock recovery can be really helpful if you are unlocked and rooted.
For example, removing problematic magisk modules.
I tried to install the EdExposed module and ended with a boot loop. To get back I had to flash the stock boot.img again and reconfigure all my modules again.
Having ADB enabled in OOS recovery will let us delete the problematic module at /data/adb/modules without having to delete the working modules.
Credit goes to @s3axel for the Post in Oneplus 8 forums
Quoting the procedure to create the modified recovery.img :
Installation Procedure:
Pre-patched files for the lazy (upto 11.0.4.5):
To find your model and build:
Code:
adb shell getprop ro.product.model
KB2001
adb shell getprop ro.build.version.ota
OnePlus8TOxygen_15.I.16_GLO_0160_2010150110
KB2000 / KB05?? - Chinese Variant
11.0.1.2 Hydrogen_15.H.16_OTA_0160_all_2010150101_4101
STOCK recovery.img
adb patched recovery
KB2001 / KB05DA - Indian Variant
11.0.1.2 - OnePlus8TOxygen_15.I.16_GLO_0160_2010150110
STOCK recovery.img
adb patched recovery
11.0.2.3 - OnePlus8TOxygen_15.I.17_OTA_0170_all_2010240047
STOCK recovery.img
adb patched recovery
11.0.3.4 - OnePlus8TOxygen_15.I.18_OTA_0180_all_2011010208
STOCK recovery.img
adb patched recovery
11.0.4.5 - OnePlus8TOxygen_15.I.19_OTA_0190_all_2011101438_3032f.zip
STOCK recovery.img
adb patched recovery
KB2003 / KB05BA - EU Variant
11.0.1.2 - OnePlus8TOxygen_15.E.17_GLO_0170_2010150108
STOCK recovery.img
adb patched recovery
11.0.2.3 - OnePlus8TOxygen_15.E.18_OTA_0180_all_2010240038
STOCK recovery.img
adb patched recovery
11.0.3.4 - OnePlus8TOxygen_15.E.19_OTA_0190_all_2011010157
STOCK recovery.img
adb patched recovery
11.0.4.5 - OnePlus8TOxygen_15.E.20_OTA_0200_all_2011101442_ed5dc.zip
STOCK recovery.img
adb patched recovery
KB2005 / KB05AA - International Variant thanks to @card13
https://drive.google.com/drive/folders/1-i4P8sWPfyqwgYvBsKWAAftQW7m66Z70?usp=sharing
KB2007 / KB05CB - T-Mobile Variant
¯\_(ツ)_/¯
Code:
❯ adb devices
List of devices attached
75317573 recovery
❯ adb shell
# df
Filesystem 1K-blocks Used Available Use% Mounted on
rootfs 3648448 40396 3608052 2% /
tmpfs 3837328 1160 3836168 1% /dev
tmpfs 3837328 0 3837328 0% /mnt
tmpfs 3837328 0 3837328 0% /apex
tmpfs 3837328 4 3837324 1% /linkerconfig
tmpfs 3837328 24 3837304 1% /tmp
/dev/block/sda11 491464 140484 350980 29% /mnt/vendor/op2
/dev/block/sda20 11760 164 11596 2% /metadata
/dev/block/dm-3 1516540 1511956 4584 100% /vendor
/dev/block/sda2 27632 10452 17180 38% /mnt/vendor/persist
/dev/block/dm-7 110397292 6627020 103770272 7% /data
Click to expand...
Click to collapse
Mpolo87 said:
CAVEAT
I've only tested this on my device (KB2005 / KB05AA), but it should be universally helpful as it's using your own boot.img so there's no need to find a matching package for your variant and os version.
CREDIT
The steps were buried across a few threads, I'm posting this so it'll be easier for others to find the information. All credit goes to xb360, FullOfHell, and TheUnkn0wn.
INFOThe basic rundown is:
Use the semi-broken TWRP package to give yourself temporary su access through adb.
Extract the boot.img your phone is currently using to your pc.
Reboot to OxygenOS, copy over the boot.img you just extracted and then use Magisk to patch it.
Copy the boot.img back to your pc and use adb to temporarily boot your phone with it, giving you root access until reboot.
Use your temporary root access to allow Magisk to patch your internal as-yet unmodified boot.img to give you permanent root.
There seems to be some confusion in the thread, I'll try to clear up what's happening and why:
The primary issue at hand is that you can't root your device without already having root privileges, for security reasons. Without a custom recovery like TWRP, there are a few more steps than usual (but mostly simple stuff).
Because we don't flash anything with this guide, it shouldn't cause any permanent bootloops if you use the wrong boot.img, if you get stuck in one just power cycle your phone.
Updating with OTAs should be the same process as the other guides here.
Because of changes in Android, devices that launched with Android 10 and above will not allow you to modify the system partition, even with root. This is not a fault of this rooting method.
Prerequisites:
ADB and Fastboot installed.
An unlocked bootloader and USB debugging enabled.
________________________________________________________
STEPS:
1. Connect your phone to your pc and boot it into fastboot mode. You can leave it connected throughout this guide.
2. On your computer open a terminal/cmd prompt. Set the directory (on your pc) you want to work from, I'm using the desktop:
for Windows, type cd C:\Users\Yourname\Desktopfor Mac, type cd desktop or cd /Users/yourname/Desktop
Spoiler: How to set up adb and fastboot properly
To usb adb and fastboot commands outside of the folder those programs are located in, you'll need to add their location to the PATH list so your terminal can still find them when it's pointing to a different folder. If you want to skip this step, set the directory to the folder that contains adb instead of the desktop.
3. Next, use the terminal to check which A/B partition is active on your phone:
Code:
fastboot getvar all
a. You'll find it on this line: (bootloader) current-slot:a/bb. For simplicity I'll be referring to boot_a.img throughout the guide, make sure to use boot_b.img if that's the one marked as active on your device.
4. Download the semi-broken TWRP package to your desktop. We'll be using it to extract a copy of your active boot_a.img. It will give you temporary su access via adb, but there won't be a gui. Only boot from it, DO NOT FLASH IT:
Code:
fastboot boot recovery.img
adb shell
dd if=/dev/block/by-name/boot_a of=/sdcard/boot_a.img
exit
adb pull /sdcard/boot_a.img boot_a.img
adb reboot
5. Copy the extracted boot_a.img file to a user accessible area of your phone, like your downloads folder.
6. Install the latest Magisk Canary apk on your phone. Open it and:
a. Select the Install option.b. Use Select and Patch a File on boot_a.img
7. Copy the patched magisk_patched_a.img file back to your computer. In terminal, type adb reboot bootloader to get back to fastboot mode.
8. Temporarily boot with the patched image that corresponds to the active partition, DO NOT FLASH IT:
Code:
fastboot boot magisk_patched_a.img
Spoiler: Why we're booting and not flashing.
You could flash this boot.img, but it's safer to temporarily boot from it without overwriting your existing image in case anything went wrong along the way. The effect is that you still get root access without modifying your device, and then you can use the much safer Magisk direct install option, which has some safeguards in place.
9. By booting with the patched image, you now have temporary root access. To make it permanent open Magisk:
a. Select the Install option.b. Use Direct Install (Recommended) to root your internal boot.img
10. Reboot and verify it worked.
Click to expand...
Click to collapse
Are you guys aware of the zip file @osm0sis created that lets you add ADB to the stock recovery? You'll need to be rooted to use it.
[TWRP][3.4.0-14][instantnoodle]Unofficial TWRP for OnePlus 8/8 Pro Unified(Stable)
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and...
forum.xda-developers.com
It works really well - I've used it on 11.0.8.11 and .12
Thank you sir. I took the plunge and have been rewarded. Appreciate it!
shadowtuy said:
OK good news I got myself sorted!
1. What I did was use "Oxygen OS updater" (can be found on playstore) with advanced mode enabled and downloaded the latest OS (11.0.8.11.)
2. Use local upgrade under settings to install 11.0.8.11 and restart. This will remove root but not user data or settings.
3. Check for and install update 11.0.8.12 under settings and it should install fine no issues.
4. Re root using your chosen method.
5. Done!
Click to expand...
Click to collapse
This looks like a great app but it won't work if you need to downgrade. The current release (11.0.8.12.KB05AA) is so bad (look at OnePlus forums) that OnePlus has even taken it down and is no longer available for download. The current one is the previous one (11.0.8.11.KB05AA). Because I have already installed the "12" release, the OxygenOS System Update will not let me downgrade to the "11" release. It gives a "to avoid booting up failure, downgrading is not allowed" message.
Can I sideload/flash this "11" zip file via ADB and accomplish my goal of downgrading? Or could I change the active slot to the inactive one, reboot and get back to "11" that way?
zzjea said:
This looks like a great app but it won't work if you need to downgrade. The current release (11.0.8.12.KB05AA) is so bad (look at OnePlus forums) that OnePlus has even taken it down and is no longer available for download. The current one is the previous one (11.0.8.11.KB05AA). Because I have already installed the "12" release, the OxygenOS System Update will not let me downgrade to the "11" release. It gives a "to avoid booting up failure, downgrading is not allowed" message.
Can I sideload/flash this "11" zip file via ADB and accomplish my goal of downgrading? Or could I change the active slot to the inactive one, reboot and get back to "11" that way?
Click to expand...
Click to collapse
Well I tried switching slots but the inactive slot was corrupted from earlier. So I do not have an "11" in the other slot.
zzjea said:
Well I tried switching slots but the inactive slot was corrupted from earlier. So I do not have an "11" in the other slot.
Click to expand...
Click to collapse
Since OP 8T OxygenOS does not have a recovery, ADB sideload will not work.
Now that 11.0.8.13 is out and I'm on 11.0.8.12 right now, and so far I haven't come across a full zip for 13 yet. Not sure, if this will work .. but I'm thinking, I will uninstall magisk via the app. Restart to ensure, I'm unrooted and then do an OTA to 13. After the OS has been upgraded, follow the steps to root the boot dump file. Anyone tried this method and if would work? The 2 things I'm worried about are - 1) if I uninstall Magisk via the app, does it fully unroot and allows OTA, 2) will the broken twrp shared above work on the latest OOS x.13?
Thanks!
rezapatel said:
Now that 11.0.8.13 is out and I'm on 11.0.8.12 right now, and so far I haven't come across a full zip for 13 yet. Not sure, if this will work .. but I'm thinking, I will uninstall magisk via the app. Restart to ensure, I'm unrooted and then do an OTA to 13. After the OS has been upgraded, follow the steps to root the boot dump file. Anyone tried this method and if would work? The 2 things I'm worried about are - 1) if I uninstall Magisk via the app, does it fully unroot and allows OTA, 2) will the broken twrp shared above work on the latest OOS x.13?
Thanks!
Click to expand...
Click to collapse
For anyone who's interested. This worked!
Hey little bit of an add in! Keep a backup of your non Rooted boot.img!! It is actually easier to flash the non rooted and update just to reroot again.
FIRST OFF - THIS IS HIGHLY TECHINICAL AND NOT FOR NON-TECH INCLINED PEOPLE. YOU CAN REALLY MESS UP YOUR PHONE IF YOU DO IT WRONG. SO PAY ATTENTION OR FIND SOMEONE SMARTER THAN YOU WITH THIS ANDROID / LINUX STUFF. YOU DO THIS ON YOUR OWN - NO WARRANTIES EXPRESSED OR IMPLIED. IT'S FOR PEOPLE THAT DON'T WANT TO WAIT FOR THEIR VENDOR TO POST A FULL ROM AND UPDATE RIGHT WHEN AN OTA COMES.
So I wanted to update my rooted Op8T OOS version, and you CAN'T (haha) do it if you're rooted. That's kind of a misconception. I knew there had to be a way... so I found a dead repo out there that used to work on Incremental OTAs. And I read the issues - did not actually work. Why? Because you need to extract the prior firmware (full ROM) first with a Payload extraction tool (most are in Python, and most are Linux-only). Well, they got stuck because the original ROM has one signature (encryption), and the OTA update has another signature, so the program would break when they didn't match. So what did I do??? Well I have to give credit to the dev I forked this from, because he mentioned - of course the signatures don't match, they are different releases! So I did something kind of... well... let's put it this way, you aren't verifying any signatures anymore. So if you screw up and put the wrong ROM base (prior full ROM) and Payload extract the payload.bin, then apply the Incremental OTA, well, you're in for trouble. BE POSITIVE YOU ARE USING THE VERSION OF THE ROM THE OTA IS INTENTED TO INCREMENTALLY UPDATE!!!!
In this case, it was quite clear. I was trying to update an A11 Op8T from OnePlus. It was on 11.0.8.3 ROM and an OTA was posted that was for 11.0.9.9. SO I used a Windows tool to extract the first set of files (the full ROM is huge BTW). The incremental update came as a 150mb file zipped up, but it modified the BIG files. Once it finished, I found that system and system_ext are not flashable (grew in size, can't resize super on active slot, not updated), the rest are. And you MUST flash from fastbootd - this is kind of a mysterious new place with modern AB devices. It can be a pain to actually get there. The standard steps if you're on stock recovery are to enable developer options, USB debugging, install the Latest ADB and Fastboot https://github.com/fawazahmed0/Latest-adb-fastboot-installer-for-windows/releases/tag/v1.7 (this script will update it for you). Ignore the God references it's a batch file you can just modify it, and I don't judge. It will pull the latest versions (Minimal ADB and Fastboot are super outdated). Next steps...
Now, getting an incremental update off a rooted phone is not easy. 1) you have to flash a stock boot.img and recovery.img. 2) you have to basically uninstall Magisk, or at least the images 3) then you MAY be able to download with Oxygen Updater or the system app. It won't install though because root is fully exposed. Once it's downloaded, it appears in some very strange location with a random character string.zip I believe. So now you have to reinstall Magisk (to get adb shell SU access). So after I confirmed it downloaded (but wouldn't flash), I had to hook my phone up to the USB cable, go to the PC and Latest ADB and Fastboot folder, adb shell, su, then cd /; find . -name *.zip > /dev/null 2>&1; to cut out some of the garbage output and scroll until I found a logical zip stored somewhere (a folder than sounded like a OnePlus update folder). Then I did a: cp [random characters.zip] /sdcard/Download/OTA_Update.zip, which I could then transfer from my phone to PC with a USB cable. Developer options / default mode USB File Transfer FYI.
Okay that was one of the hard parts. Now next to more hard parts. You need a Linux environment (I used WSL2 Debian Buster). The easiest setup (after spending hours attempting to get the correct packages loaded) was to install the personal version of Anaconda Python x64 for AMD64 processors for Linux. Then I could use conda install [package name] for missing dependencies as the program would throw errors. Yes you have to read the errors or you won't be able to figure out what is actually not installed. Anyhow, the modded forked repo of python files is here: git clone the repo: git clone https://github.com/mrslezak/update_payload_extractor.git - now if git isn't setup on your Linux box, well, you're in for some trouble.
So once it's installed, you need to actually use python3 commands for each step - so anywhere you see "python" put "python3" instead as most machines have both 2.7 and 3.X installed. I used Python 3.8 something, so ignore the 3.6 it's not required. So here I took a payload.bin extracted with a Windows.exe file (available somewhere on XDA, there are severel, one is Go based) and copied them once extracted from the original ROM to the WSL instance on my Win10 PC. Now there come issues here. They need to go into an "old" directory you must create (in update_payload_extractor directory), and copying from Windows will make them root access only, so a: sudo chown user:user old/ is required to get it writable. I believe the program will make the rest of the files on its own. They will end up in "output." You just need to extract the payload.bin and payload.properties files from the incremental update you extracted and place them in the update_payload_extractor directory.
Now there is some strange stuff going on, this was always beta, and never working. So I took the note of the issues and blocked a Google certificate validation routine (just commented it out) so it doesn't verify anything. I say it again BE EXTREMELY CAREFUL THAT YOUR PRIOR FULL ROM AND OTA UPDATE ARE MEANT TO BE USED TOGETHER. Anyhow, run what it says if your system is setup:
Incremental OTA
Copy original images (from full OTA or dumped from devices) to old folder (with part name without file extension, ex: boot, system) - I put an .sh script here if your files are .img called remove_img_extension_old.sh - note that GitHub sometimes loses the execute permission so you may have to type: sudo chmod +x remove_img_extension_old.sh. It is meant to be run from the root of the project. ./remove_img_extension_old.sh
LD_LIBRARY_PATH=./lib64/ ./extract.py --output_dir output/ --old_dir old/ payload.bin
The above line will start the extract and combine process the OTA usually does on your phone, and output the files to the output directory. Once those are generated, then you can run another helper script I wrote to add back .img to each file called add_img_extension_output.sh again meant to be run from the root folder. Now you need to copy these output files (no guarantee all are updated, it will have all of them - on Op8T system and system_ext couldn't be flashed because they grew in size, and I don't know how to expand the super partition space to enable them to flash, so they aren't in the linked file - it still updates). The files on Op8T ending in lp5 are RAM files for the newest devices that are running LPDDR5 memory, the flash.bat script will need to be modified if you have one of these (2 flashes). The way I made the file will work in 98% of devices.
Okay I run the rest from Windows, so now it gets a little tricky. You need to get into Fastbootd, which means flash boot.img (you just extracted it), flash recovery image (same), using fastboot flash boot boot.img, fastboot flash recovery recovery.img. Now getting to fastbootd can be quite perplexing. You may just have your phone on, type adb reboot bootloader, then type fastboot reboot fastboot, and be in fastbootd (it will look like stock recovery but say fastbootd on top). The other way is to boot to recovery (developer options extended boot menu makes this much easier), then select Fastboot. Sometimes you get Fastboot and sometimes Fastbootd. It seems quite random. DON'T START THE FLASH_ALL.BAT UNTIL YOU KNOW YOU ARE IN FASTBOOTD!!!!
The fastboot command to tell you if you are in fastbootd (it will report yes if so: fastboot getvar is-userspace
Otherwise, those files will NOT be allowed to flash to your device, and you will end up with some random combination of prior and updated files. That could end badly. Once you DO get to Fastbootd, run the flash_all.bat, and DON'T SWITCH SLOTS. Yes, this is an OTA, but you already patched the files. Upon successful flashing, you can reboot to fastboot and flash a patched kernel with Magisk already enabled such as my forked Radioactive here: https://github.com/mrslezak/Radioactive_kernel_oneplus8/releases/tag/v2.2.5-MOD - the .img file is a Magisk patched custom kernel, you can also flash the twrp alpha (that seems to work in my experience, it's just slow, on OOS works fine despite warnings it doesn't). https://forum.xda-developers.com/t/recovery-11-alpha-teamwin-recovery-project-8t-kebab.4302449/ fastboot commands for the kernel: fastboot flash boot image_name.img; recovery fastboot flash recovery twrp_name.img.
I successfully updated while rooted from the prior ROM version. I'm sure it will work on many phones. Best of luck to you!!! I did find out how to install "the full ROM" unreleased on a rooted phone, there is some undocument fastboot stuff I had to figure out (temp system-cow and system_ext-cow files that use up all the space in the super partition) so I added them to my batch file. Now install for whatever device you have, and watch out for those weird temp files that aren't documented anywhere that I could find. Took literally hours to get it working, but it does now!!!
BTW if anyone knows how to resize the super partition, that would complete this project. I.e. you could flash the patched system and system_ext on an Op8T.
Your phone may have no issue or no super partition, then you don't care, it's not needed. I can't recall when dynamic (resizable) partitions came out but I think in Android 10 some devices started to use them. They are developer hell in my opinion.
Some TWRP versions allow you to just resize the partition on the fly, while on my phone, it's not an added feature yet. I'm also not sure if the resize does an auto-wipe either then you could also find yourself in trouble if you couldn't immediately get to Fastbootd. Some ROMs will boot to "Device is corrupt" if things like this change, just a warning, which I tried by switching A/B slots, but I had luckily installed TWRP on the other partition and was able to switch slots there and go back to booting.
UPDATE: I was able to eventually locate why the Super partition was getting full - there are temp files created as dynamic partitions when trying to install an OTA - I had to delete any logical partitions with the extension "-cow" which existed for system and system_ext (on the Op8T I was using), I was on slot A, so they were called system_a-cow and system_ext-cow, I deleted them like this:
fastboot delete-logical-partition system_a-cow
fastboot delete-logical-partition system_ext_a-cow
To see if you have any temp files present, you type:
fastboot getvar-all
And scroll through them and see if any of these mystery -cow files are present.
(bootloader) is-logical:system_a-cow:yes
(bootloader) is-logical:system_ext_a-cow:yes
Whew! That was a pain. But no more waiting for incremental updates to become full ROMs anymore on a rooted phone!
Oh, and I put the update for OOS here: https://forum.xda-developers.com/t/...install-from-fastbootd.4316147/#post-85441161