Related
Hello!
i bought an OT-985 (not dual sim) just a week ago and i'm trying in any ways to root it because it's a branded one and I don't like boot logo and some apps but without luck, so I think it's better to share some info on it...
This phone have 3 "secret" menu: ((!!Be Carefully, you can damage your phone!!))
#1. Factory Mode --> Power off phone, then start it keeping pressed Home&VolDown buttons and Power On button
#2. Android system recovery utility --> Power off phone, then start it keeping pressed VolUp and Power On buttons, at the logo press Home again to show menu
#3. Engineer Mode --> it's a code to compose directly in the phone "*#*#3646633#*#*" (without quotes)
Some important info found (see attachment for more):
Code:
[Version]
BB Chip: [B]MT6573[/B]
MS Board: one_touch_985_gsm
IMEI: xxxxx80111xxxxx
Modem Ver.: MAUI.11AMD.W11.37.SP.V27.P27 , 2012/08/15 14:10
Bar Code: MT012345678901234567
Build Time: Thu Sep 27 18:04:02 CST 2012
UBoot Ver.: 2010.06
Kernel Ver.: [B]2.6.35.7[/B] ([email protected]) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Fri Sep 14 18:20:03 CST 2012
Android Ver.: 2.3.6
SW Ver.: ALPS.GB.JRD2.SP.V2
Custom Build Verno.: v53W-0
[Partition Info]:
dev size erasesize name
mtd0: 00040000 00020000 "preloader"
mtd1: 000c0000 00020000 "dsp_bl"
mtd2: 00080000 00020000 "pro_info"
mtd3: 00300000 00020000 "nvram"
mtd4: 00020000 00020000 "seccnfg"
mtd5: 00060000 00020000 "uboot"
mtd6: 00600000 00020000 "boot"
mtd7: 00600000 00020000 "recovery"
mtd8: 00120000 00020000 "secstatic"
mtd9: 00060000 00020000 "misc"
mtd10: 00300000 00020000 "logo"
mtd11: 000a0000 00020000 "expdb"
mtd12: 07300000 00020000 "system"
mtd13: 09100000 00020000 "custpack"
mtd14: 03c00000 00020000 "cache"
mtd15: 09fa0000 00020000 "userdata"
[File System Info]:
rootfs / rootfs ro,relatime 0 0
tmpfs /dev tmpfs rw,relatime,mode=755 0 0
devpts /dev/pts rw,relatime,mode=600 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/obb tmpfs rw,relatime,mode=755,gid=1000 0 0
/dev/block/mtdblock12 /system yaffs2 ro,relatime 0 0
/dev/block/mtdblock13 /custpack yaffs2 rw,relatime 0 0
/dev/block/mtdblock15 /data yaffs2 rw,nosuid,nodev,relatime 0 0
/dev/block/mtdblock14 /cache yaffs2 rw,nosuid,nodev,relatime 0 0
tmpfs /data/local/sqlite_stmt_journals tmpfs rw,relatime,size=4096k 0 0
/dev/block/mtdblock8 /data/nvram/md/s yaffs2 ro,relatime 0 0
I tested almost any exploit or tool like Gingerbreak, alcapwn, zergRush, SuperOneClick, MTK Droid Tools.....it seems 2.6.35.7 is a very solid kernel!
After that i found mt6573 from mediatek it's a common chip used in china clone phone too (OT985 = TCLA966) and "MT6573" seems a very good keyword to search for, in fact I discovered some good tool like "SP Flash Tool" and "MT65xx ROM Studio"
Tutorial on how create a rom dump without root privileges:
"Creating a ROM dump of your MT65x3 device" (sorry I can't post links yet)
bm-smartphone-reviews.blogspot.com.es/2012/04/creating-rom-dump-of-your-mt65x3-device.html
This serbian guy on youtube says it's possibile to gain root by first flashing boot.img:
"Kako Root-ovati Alcatel OT 985" (instruction to root 985 plus a .bin file image)
youtube.com/watch?v=Ni6P94A-PcY
so...
I hope this info can help some real Dev to point me in the right direction! I'm not a programmer, I just use Linux everyday at home, actually i'm trying to understand a pdf from Dan Rosenberg who seems to had done an exploit for my kernel version on a Motorola but obviously files are different...
Last thing, if I do a "Factory reset" can I wipe the branded logo animation at boot or because it's written in the NAND i can't? Thank you
Hi!
Hi one more Alcatel OT 985 in need of root
pls help
expert in bootimg.img wanted
Successfully rooted my OT-985 !!
Finally I can see # in the adb shell
1) Followed instructions at bm-smartphone-reviews.blogspot.com.es/2012/04/creating-rom-dump-of-your-mt65x3-device.html to make a backup of my NAND partitions
2) Used a perl script to unpack/repack boot image and changed ro.secure=0 in default.prop (forum.xda-developers.com/showthread.php?t=1587411)
3) Flashed modified bootimg.img following instructions at bm-smartphone-reviews.blogspot.in/2011/10/mt65x3-flashing-tutorial.html to flash back my modified bootimg
X) Discovering my new just modified boot image doesn't work, see phone blocked at android logo, try to flash the backup previously generated, see phone blocked at android logo again...
Y) Flash boot image from unknow source www.youtube.com/watch?v=Ni6P94A-PcY and see my phone boot again as it should and finally see id=0 after a couple of weeks googling and testing and going crazy due to a stupid OS (Win) and it's drivers
So, now my phone it's rooted but i'd like to know from someone expert why my original bootimg backup doesn't work, I can unpack it and see all files and directory so I think image isn't corrupted.
Surely my backup image and the one from youtube video I flashed are different in size, but I can flash the last one using my scatter original file and not the one provided in youtube link.
It could be good if someone else take a backup of it's 985 nand and specifically BOOTIMG so i can compare to mine. Better if italian and TIM branded.
To all noob: i'm not a developer so don't start to ask ROM, simply I don't know where to put my hands for it
--edit--
i forgot to mention how to connect our OT-985 to SP Flash Tool, once drivers are working, disconnect usb cable from computer and pull away battery from phone, after you click "Download/Read Back" button you have 15 seconds to connect usb cable first and immediately after put back the battery in the phone, if all it's ok you'll see a yellow bottom bar
--end edit--
cwm
just a little update..
i've successfully flashed CWM recovery on my OT-985 and attached here for who need it. !!WARNING!! DO IT AT YOUR OWN RISK!
Camera button to give OK and power button for Back.
@references:
forum.xda-developers.com/showthread.php?t=1825722
chinagizmos.blogspot.it/2012/10/porting-cwm-recovery-for-mt65xx-phones.html.html
--edit--
i found that CWM doesn't backup /custpack partition and i have yet to learning how to integrate directly in CWM. Custpack is present in all Alcatel phone and used to store system apps.
Actually you can do a backup by giving "dd if=/dev/mtd/mtd13 of=/sdcard/custpack.img bs=4096" in a root shell
--end edit--
giuaig said:
just a little update..
i've successfully flashed CWM recovery on my OT-985 and attached here for who need it. !!WARNING!! DO IT AT YOUR OWN RISK!
Camera button to give OK and power button for Back.
@references:
"forum.xda-developers.com/showthread.php?t=1825722"
"chinagizmos.blogspot.it/2012/10/porting-cwm-recovery-for-mt65xx-phones.html.html"
Click to expand...
Click to collapse
thanks so much!! :good:
it's very difficult , another way for newbie?Do you solved?
GunnyHighway82 said:
it's very difficult , another way for newbie?Do you solved?
Click to expand...
Click to collapse
Sorry, actually there isn't an easier way for rooting and i don't think in the future will be more noob friendly
Just try to follow youtube link for needed files and my pseudo-instructions and eventually come back here to say at which stage you are blocked.
Basically you need:
- connect phone to pc, if you are able to run Alcatel OT Upgrade this step is already done
- do a BACKUP for ALL nand partitions using SP Flash Tool bm-smartphone-reviews.blogspot.com.es/2012/04/creating-rom-dump-of-your-mt65x3-device.html
- flash a new boot image using file provided by Serbian guy in youtube video [youtube.com/watch?v=Ni6P94A-PcY]
- flash a new recovery using CWMR i provided at #4 post
Keep in mind we are at an early stage yet with OT985 so it's very important to do a good BACKUP expecially with /custpack partition!
Ciao
giuaig said:
Sorry, actually there isn't an easier way for rooting and i don't think in the future will be more noob friendly
Just try to follow youtube link for needed files and my pseudo-instructions and eventually come back here to say at which stage you are blocked.
Basically you need:
- connect phone to pc, if you are able to run Alcatel OT Upgrade this step is already done
- do a BACKUP for ALL nand partitions using SP Flash Tool [bm-smartphone-reviews.blogspot.com.es/2012/04/creating-rom-dump-of-your-mt65x3-device.html]
- flash a new boot image using file provided by Serbian guy in youtube video [youtube.com/watch?v=Ni6P94A-PcY]
- flash a new recovery using CWMR i provided at #4 post
Keep in mind we are at an early stage yet with OT985 so it's very important to do a good BACKUP expecially with /custpack partition!
Ciao
Click to expand...
Click to collapse
Where we can find custom roms for this phone?
Sent from my HTC Desire using Tapatalk 2
office rmamewi
nenadj said:
Where we can find custom roms for this phone?
Sent from my HTC Desire using Tapatalk 2
Click to expand...
Click to collapse
Sorry, no custom ROM at the moment, only root and ability to remove some stock apps
I didm't understand
ciao, ho visto che sei italiano, potresti rispiegarmelo meglio il procedimento se non ti dispiace?:laugh: se vuoi possiamo anche scambiarci skype cosi mi spieghi bene, sempre se ne hai voglia !
frafra800 said:
ciao, ho visto che sei italiano, potresti rispiegarmelo meglio il procedimento se non ti dispiace?:laugh: se vuoi possiamo anche scambiarci skype cosi mi spieghi bene, sempre se ne hai voglia !
Click to expand...
Click to collapse
#ENG
Hello, i don't think we are allowed to write in Italian here....
Basic instructions are posted above in the #7 post.
If you have problems please write in this thread what you can't do and where are you blocked
#ITA
Ciao, attenzione al regolamento che dice di scrivere solo in inglese!
Per il rooting,
- devi prima collegare il telefono al pc ed assicurarti che i driver (se usi win) funzionino a dovere, di solito installando "Alcatel OT Upgrade" e l' "Alcatel Android Manager" direttamente dal sito dell'alcatel risolvi questo passaggio
- fare un BACKUP di TUTTE le partizioni esistenti sul telefono (compresa /custpack) utilizzando SP Flash Tool [bm-smartphone-reviews.blogspot.com.es/2012/04/creating-rom-dump-of-your-mt65x3-device.html]
- fare il flash dell'immagine di boot utilizzando il file boot985root.img che trovi nel video youtube del ragazzo Serbo [youtube.com/watch?v=Ni6P94A-PcY]
- A questo punto il telefono e' rootato, manca ancora la CWM recovery che puoi scaricare nel mio post #4 e flashare utilizzando sempre SP Flash Tool
Questi a grandi linee sono i passaggi, e' importante capire come si usa e a cosa serve SP Flash Tool, ti consiglio di fare esperienza con il backup (fanne anche piu' di uno) seguendo il link che ti ho messo al secondo passaggio.
Se hai problemi scrivi in questo thread dove sei bloccato o cosa non capisci di questi passaggi.
Root Access
Hey there. I accidentaly own an OT985 and successfully gained root access on it with SP Flash Tool v2.1134.00 and flashed clockworkmod recovery 6.0.2.7 with m44root tool. So it's works. I just want to share my experience whit you guys. Cheers!:good:
Alcatel 985
I had rooted my alcatel 985 following this tuttorial youtube.com/watch?v=Ni6P94A-PcY[/url] and now i don't have network coverage, my sim card is not recognizable. Do you have some information how can i solve this or do you have the original boot.img file. Thanks.
MrNikolovski said:
I had rooted my alcatel 985 following this tuttorial youtube.com/watch?v=Ni6P94A-PcY[/url] and now i don't have network coverage, my sim card is not recognizable. Do you have some information how can i solve this or do you have the original boot.img file. Thanks.
Click to expand...
Click to collapse
first time i see a similar problem on our 985, maybe "logcat" can help you, for example you can write inside adb shell:
Code:
logcat > /sdcard/logcat.log
or better in your case
Code:
logcat -b radio > /sdcard/logcat.log
and see what's going wrong with your phone. More info on logcat here --> http://forum.xda-developers.com/showthread.php?t=1726238
i've attached my stock boot.img for you but as you can see from my first post i don't really know if this is a 100% full working backup
giuaig said:
#ENG
Hello, i don't think we are allowed to write in Italian here....
Basic instructions are posted above in the #7 post.
If you have problems please write in this thread what you can't do and where are you blocked
#ITA
Ciao, attenzione al regolamento che dice di scrivere solo in inglese!
Per il rooting,
- devi prima collegare il telefono al pc ed assicurarti che i driver (se usi win) funzionino a dovere, di solito installando "Alcatel OT Upgrade" e l' "Alcatel Android Manager" direttamente dal sito dell'alcatel risolvi questo passaggio
- fare un BACKUP di TUTTE le partizioni esistenti sul telefono (compresa /custpack) utilizzando SP Flash Tool [bm-smartphone-reviews.blogspot.com.es/2012/04/creating-rom-dump-of-your-mt65x3-device.html]
- fare il flash dell'immagine di boot utilizzando il file boot985root.img che trovi nel video youtube del ragazzo Serbo [youtube.com/watch?v=Ni6P94A-PcY]
- A questo punto il telefono e' rootato, manca ancora la CWM recovery che puoi scaricare nel mio post #4 e flashare utilizzando sempre SP Flash Tool
Questi a grandi linee sono i passaggi, e' importante capire come si usa e a cosa serve SP Flash Tool, ti consiglio di fare esperienza con il backup (fanne anche piu' di uno) seguendo il link che ti ho messo al secondo passaggio.
Se hai problemi scrivi in questo thread dove sei bloccato o cosa non capisci di questi passaggi.
Click to expand...
Click to collapse
Hi, i'm italian... and i didn't understand very well how to do a backup of NAND and how to flash my Alcatel OT985... can you make me a detalied italian guide? if you want you will send it on my email: [email protected]!
sorry for my wrong english! xD
michiamoantonio said:
Hi, i'm italian... and i didn't understand very well how to do a backup of NAND and how to flash my Alcatel OT985... can you make me a detalied italian guide? if you want you will send it on my email: [email protected]!
sorry for my wrong english! xD
Click to expand...
Click to collapse
guys! i' ve rooted my phone... but i still don' t be able to unisntall system applications or put tehey in SD card!
i' ve another question, i'm writing it in italian beacouse is more difficult to translate in english! xD :
cosa vuol dire flashare una recovery? e poi il mio cell è brandizzato TIM e vorrei aliminare tutte le app tim che non mi servono oppure installare direttamente una rom nobrand... come faccio?
grazie!
thank to all!
---------- Post added at 02:43 PM ---------- Previous post was at 02:14 PM ----------
michiamoantonio said:
guys! i' ve rooted my phone... but i still don' t be able to unisntall system applications or put tehey in SD card!
i' ve another question, i'm writing it in italian beacouse is more difficult to translate in english! xD :
cosa vuol dire flashare una recovery? e poi il mio cell è brandizzato TIM e vorrei aliminare tutte le app tim che non mi servono oppure installare direttamente una rom nobrand... come faccio?
grazie!
thank to all!
Click to expand...
Click to collapse
guys... i' ve a good notice! i' ve solved my problems... but if someone will find no brand ROM and will post it is very good! xD
Remove TIM application
I'm rooting my phone and adding Titanim Backup .
When I can try to remove TIM application look this pop message explain the apk file is not foud.
There is solution of this problem?
Thanx Digital974
:crying:
digital974 said:
I'm rooting my phone and adding Titanim Backup .
When I can try to remove TIM application look this pop message explain the apk file is not foud.
There is solution of this problem?
Thanx Digital974
:crying:
Click to expand...
Click to collapse
you have to use root uninstaller is very goog app... and for put in SD card the applications you can use link2SD!
Welcome to try a more detailed tutorial
tutondrius said:
Hi one more Alcatel OT 985 in need of root
pls help
Click to expand...
Click to collapse
Hi guys... whoever wants is welcome to try a more detailed tutorial made by me (only the tutorial) using the instructions given here (credit and thanks were given).
just search for "root alcatel 985/985D" and click on the first post from xda (can't post links yet)
Disclaimer I did not invent the method i just posted it in a more detailed way for people with smaller knowledge from android.
Thank you goes to guiaig!
manual unlock this device?
I there, i just bought this phone, i wonder if there' a way to unlock it by flashing or changing firmware, please i need to unlock, and also want to try some custom rom for thi phone, but nothing yet ready for this device
Thanks
OpenVPN Connect
-For jailed/unjailed iOS
-Freenet unlimited
Compatibility:
-iPhone 3GS, iPhone 4, iPhone 4S, iPhone 5, iPod touch (3rd generation), iPod touch (4th generation), iPod touch (5th generation) and iPad. Requires iOS 5.0 or later. This app is optimized for iPhone 5.
Requirements:
1. Smart sim- P2 load/unblocked
-unblocking procedure: Here
2. OpenVPN Connect Application: Here
3. Fbvpn config: see attachement
-Fbvpn free trial account for 3 days..register here --->for trial server only
note: account need validation from your email account, check your email after registration.
-disposable email will be deleted without notice..ty
VpnBook config: see attachement
-VpnBook account-->Username: vpnbook Password: nue2xah5
For updated account visit here..http://www.vpnbook.com/#openvpn
4. Ifunbox: http://i-funbox.com/
-pwede rin gumamit ng iTunes,iFile etc. sa pag-import ng .ovpn file basta extract muna.
Steps:
1. Connect your iphone/ipad to pc..Open Ifunbox : screenshot.
2. Open Documents and copy Fbvpn config folder from pc to openvpn connect documents: screenshot
3. Check kung na-import na config at certificate sa iphone/ipad: screenshot
note: disregard na lang po yung "External certificate profile" sa screenshot ibang config kasi ginamit ko dyan pero working rin...yung updated na config "Standard profile" na dapat nakalagay.
4. Enjoy!!!
note: try nyo na lang sa ibang vpn,kung gusto nyo naman trial account username/pw, pm nyo lang ako or visit here
*Try nyo din Openvpn Connect for Android(rooted/unrooted) same config w/ iOS..di ko pa natry wala me kasi Android..https://play.google.com/store/apps/details?id=net.openvpn.openvpn&hl=en
SORRY FOR MY ENGLISH
Finally I found a way to bypass the restriction method and play video while driving
anyone following these steps it total by his/her own risk and I'm not responsible to any issue might happen as I'm doing this for research purposes. for me it is working each time I'm doing it
1. Push your ignite button twice so you not be in accessory mode
2. Hold Bright power and menu until you see two choice click on the button on
3. Hold menu to get to another menu
4. Choose vehicle model information then vehicle setting type and you will see three types
TBAA:Gr013 DA KC No 4DR
TBAA:Gr013 DA KA No 4DR (this is the default one)
TBAA:Gr013 DA Kx No 4DR
you will choose
TBAA:Gr013 DA KC No 4DR (you need to make sure you are in empty space area as the GPS need to be locked after rebooting and also make sure you are not in accessory mode)
5. After the device reboot hold bright power and menu again and choose functional setup and then other
6. You will see operation restricted turn it off
7. Also enable Pandora and then back to home menu
8. Now you have system that can be modified couple things while driving not like before like you can use the dial pad
9. Now phase two to watch videos
10. open the browser and type about:debug
11. then delete it and type file:/// and hit enter
12. you will see the file system files, scroll down and click on vendor then app folder
13. scroll down and you find whitelistservice apk file
14. NEVER NEVER NEVER click on any APK only whitelistservice apk (I WARN YOU!!!!!!!!!!!!!!!!!!!)
15. click on it and it will try to install then it fail
16. then back to the home screen and hold power till it asking for reboot. reboot your system and viola you can run browser and gallery to browse , watch you tube or videos
Might you need to turn off your lane camera as when ever you right signal it will stop your video
issues you may get with this method
App installer will not work
rear camera very rare can be delayed or lag
To revert the video thing then you need to setting then apps download section and you will see the white list service there then just uninstall it and you back to normal.. if it acting weird just reboot the unit
Now to things I figured it out
Any apk files that are android system files from version 4.2.2 it will fail with signature different from the one installed
AHA APK can be update it will not working good as it not design for car ( I got it from internet)
apklist.apk from Honda pilot it willing to install but it fail because the version that we have is newer (at least mine as it update to latest android version f190)
Any app you click on it will show gray install button but if you multitask and go to the browser and browse the path /data/data/usbtmp then you will see the file there and that path can install apk but it will fail again. what ever you do the file will delete from there.. i tried to unplugged the fuse and the file stayed there so I tried the to do the whitelistservice.apk that we did above as this will stop the service from running but looks the package installer call whielistlib and the lib check the signature too.
I tried to plug USB serial as I can see in the log android loading PL32XX driver and i change the USB from HOST to DEVICE from the hidden menu i got an Ethernet connection from the USB and I can see the internal sdcard not the system as it is MTP I think.
Rebooting the device and holding menu will get you in safe mode but it didn't help anything
Honda link when enabled it will open another port other than the 5000 (random) when you nmap for the HU IP
Tried most exploits on browser didn't work
Modified APK didn't working
I would we all work together and break the APK installing process.
Donate can accepted to by pizza and drink on paypal
Majedalanni at yahoo.com
Thanks guys for reading my post
Works in european version? Honda connect 2?
Enviado desde mi SM-G935F mediante Tapatalk
I don't know, maybe try it by yourself
Does anyone know if this will work for the 2017 Honda CRV? Disabling the DD VSP error setting does not allow video while in motion like it did for previous model years.
majedalanni said:
SORRY FOR MY ENGLISH
Finally I found a way to bypass the restriction method and play video while driving
anyone following these steps it total by his/her own risk and I'm not responsible to any issue might happen as I'm doing this for research purposes. for me it is working each time I'm doing it
1. Push your ignite button twice so you not be in accessory mode
2. Hold Bright power and menu until you see two choice click on the button on
3. Hold menu to get to another menu
4. Choose vehicle model information then vehicle setting type and you will see three types
TBAA:Gr013 DA KC No 4DR
TBAA:Gr013 DA KA No 4DR (this is the default one)
TBAA:Gr013 DA Kx No 4DR
you will choose
TBAA:Gr013 DA KC No 4DR (you need to make sure you are in empty space area as the GPS need to be locked after rebooting and also make sure you are not in accessory mode)
5. After the device reboot hold bright power and menu again and choose functional setup and then other
6. You will see operation restricted turn it off
7. Also enable Pandora and then back to home menu
8. Now you have system that can be modified couple things while driving not like before like you can use the dial pad
9. Now phase two to watch videos
10. open the browser and type about:debug
11. then delete it and type file:/// and hit enter
12. you will see the file system files, scroll down and click on vendor then app folder
13. scroll down and you find whitelistservice apk file
14. NEVER NEVER NEVER click on any APK only whitelistservice apk (I WARN YOU!!!!!!!!!!!!!!!!!!!)
15. click on it and it will try to install then it fail
16. then back to the home screen and hold power till it asking for reboot. reboot your system and viola you can run browser and gallery to browse , watch you tube or videos
Might you need to turn off your lane camera as when ever you right signal it will stop your video
issues you may get with this method
App installer will not work
rear camera very rare can be delayed or lag
To revert the video thing then you need to setting then apps download section and you will see the white list service there then just uninstall it and you back to normal.. if it acting weird just reboot the unit
Now to things I figured it out
Any apk files that are android system files from version 4.2.2 it will fail with signature different from the one installed
AHA APK can be update it will not working good as it not design for car ( I got it from internet)
apklist.apk from Honda pilot it willing to install but it fail because the version that we have is newer (at least mine as it update to latest android version f190)
Any app you click on it will show gray install button but if you multitask and go to the browser and browse the path /data/data/usbtmp then you will see the file there and that path can install apk but it will fail again. what ever you do the file will delete from there.. i tried to unplugged the fuse and the file stayed there so I tried the to do the whitelistservice.apk that we did above as this will stop the service from running but looks the package installer call whielistlib and the lib check the signature too.
I tried to plug USB serial as I can see in the log android loading PL32XX driver and i change the USB from HOST to DEVICE from the hidden menu i got an Ethernet connection from the USB and I can see the internal sdcard not the system as it is MTP I think.
Rebooting the device and holding menu will get you in safe mode but it didn't help anything
Honda link when enabled it will open another port other than the 5000 (random) when you nmap for the HU IP
Tried most exploits on browser didn't work
Modified APK didn't working
I would we all work together and break the APK installing process.
Donate can accepted to by pizza and drink on paypal
Majedalanni at yahoo.com
Thanks guys for reading my post
Click to expand...
Click to collapse
Thank you for your post. I had a civic 2017 ELX in Brazil. I followed your post but in my case there were some differences. Although 3 options of car mode there are 4 types. I tried the first one and did everything like you. Everything is working except Pandora bcz i didn't see this option. Anyway, it's just for you know that in Brazilian model it work too. Once again thanks for your help.
Bright power???
where's that bright power???tnx
majedalanni said:
SORRY FOR MY ENGLISH
Finally I found a way to bypass the restriction method and play video while driving
anyone following these steps it total by his/her own risk and I'm not responsible to any issue might happen as I'm doing this for research purposes. for me it is working each time I'm doing it
1. Push your ignite button twice so you not be in accessory mode
2. Hold Bright power and menu until you see two choice click on the button on
3. Hold menu to get to another menu
4. Choose vehicle model information then vehicle setting type and you will see three types
TBAA:Gr013 DA KC No 4DR
TBAA:Gr013 DA KA No 4DR (this is the default one)
TBAA:Gr013 DA Kx No 4DR
you will choose
TBAA:Gr013 DA KC No 4DR (you need to make sure you are in empty space area as the GPS need to be locked after rebooting and also make sure you are not in accessory mode)
5. After the device reboot hold bright power and menu again and choose functional setup and then other
6. You will see operation restricted turn it off
7. Also enable Pandora and then back to home menu
8. Now you have system that can be modified couple things while driving not like before like you can use the dial pad
9. Now phase two to watch videos
10. open the browser and type about:debug
11. then delete it and type file:/// and hit enter
12. you will see the file system files, scroll down and click on vendor then app folder
13. scroll down and you find whitelistservice apk file
14. NEVER NEVER NEVER click on any APK only whitelistservice apk (I WARN YOU!!!!!!!!!!!!!!!!!!!)
15. click on it and it will try to install then it fail
16. then back to the home screen and hold power till it asking for reboot. reboot your system and viola you can run browser and gallery to browse , watch you tube or videos
Might you need to turn off your lane camera as when ever you right signal it will stop your video
issues you may get with this method
App installer will not work
rear camera very rare can be delayed or lag
To revert the video thing then you need to setting then apps download section and you will see the white list service there then just uninstall it and you back to normal.. if it acting weird just reboot the unit
Now to things I figured it out
Any apk files that are android system files from version 4.2.2 it will fail with signature different from the one installed
AHA APK can be update it will not working good as it not design for car ( I got it from internet)
apklist.apk from Honda pilot it willing to install but it fail because the version that we have is newer (at least mine as it update to latest android version f190)
Any app you click on it will show gray install button but if you multitask and go to the browser and browse the path /data/data/usbtmp then you will see the file there and that path can install apk but it will fail again. what ever you do the file will delete from there.. i tried to unplugged the fuse and the file stayed there so I tried the to do the whitelistservice.apk that we did above as this will stop the service from running but looks the package installer call whielistlib and the lib check the signature too.
I tried to plug USB serial as I can see in the log android loading PL32XX driver and i change the USB from HOST to DEVICE from the hidden menu i got an Ethernet connection from the USB and I can see the internal sdcard not the system as it is MTP I think.
Rebooting the device and holding menu will get you in safe mode but it didn't help anything
Honda link when enabled it will open another port other than the 5000 (random) when you nmap for the HU IP
Tried most exploits on browser didn't work
Modified APK didn't working
I would we all work together and break the APK installing process.
Donate can accepted to by pizza and drink on paypal
Majedalanni at yahoo.com
Thanks guys for reading my post
Click to expand...
Click to collapse
I meant bright on the top + power + menu
hello Friend
I have 2017 civic hb.
when i follow your example steps i get 3 different vehicle model but no one like your mentioned models. all different.
Which model select I have to select?
TEAA:Gr075 DA+ KE NO 5DR
TEAA:Gr075 DA+ TR NO 5DR
TEAA:Gr075 DA+ TR NO 5 DR
Please let me know
Thanks
flima07 said:
Thank you for your post. I had a civic 2017 ELX in Brazil. I followed your post but in my case there were some differences. Although 3 options of car mode there are 4 types. I tried the first one and did everything like you. Everything is working except Pandora bcz i didn't see this option. Anyway, it's just for you know that in Brazilian model it work too. Once again thanks for your help.
Click to expand...
Click to collapse
Como vc fez parceiro, pois não consigo nem começar com as indicações do colega.
enable Pandora... From the list cannot change
Reverse sensor not working
After i done all the things, my reverse sensor not “beep beep” anymore?
Desbloquear player original
flima07 said:
Thank you for your post. I had a civic 2017 ELX in Brazil. I followed your post but in my case there were some differences. Although 3 options of car mode there are 4 types. I tried the first one and did everything like you. Everything is working except Pandora bcz i didn't see this option. Anyway, it's just for you know that in Brazilian model it work too. Once again thanks for your help.
Click to expand...
Click to collapse
Olá, tudo bem?
Em primeiro lugar, estou escrevendo em português, porque vi que vc é brasileiro.... rsrsrs
Também tenho um Civic ELX, meu é 2018. Cara, consegui fazer todo o hack certinho com o HondaHack e tal.
Só que o desbloqueio para vídeo com o player original do carro, não consigo.
Até já consegui instalar outros players de vídeo, mas eles são ruins e não possuem o recurso integrado com o volante, apenas com touch na central.
A maioria dos players não avança pasta ou não avança música, etc.... não possuem recurso aleatório, etc....
O player original é top, ele tem vários recursos, porém, mesmo com o Hack, ele funciona apenas com o freio de estacionamento acionado.
Já executei aquela opção no HondaHack para ignorar o freio de estacionamento, mas não adianta. Ao liberar o freio, o vídeo sai.
Quando na fonte de áudio, ponho USB, ele usa o player original, porém, só com o freio de estacionamento acionado é que aparece o vídeo. Soltou, some o vídeo e fica só música.
Mas daí usando a fonte como "Audio Apps", daí consigo usar um player e de boa.
Tentei comprar o Honda Hack Pro pra ver se melhorava, mas não consegui comprar, pois, vou até o PayPal e chegando lá diz que o vendedor só aceita pagamentos pelo seu site e não tem o site do honda hack.
Cara, sobre esse método novo, você conseguiu/descobriu algo?
Ou conseguiu de alguma outra forma?
==============
Hello, how are you?
First of all, I'm writing in Portuguese, because I saw that you're Brazilian .... rsrsrs
I also have a Civic ELX, mine is 2018. Man, I was able to do all the right hack with HondaHack and such.
Only the unlock for video with the original player of the car, I can not.
I've even been able to install other video players, but they are bad and do not have the integrated feature with the steering wheel, just touch with the control panel.
Most players do not advance folder or forward music, etc .... have no random feature, etc ....
The original player is top, it has several features, but even with the Hack, it works only with the parking brake applied.
I already ran that option on HondaHack to ignore the parking brake, but that's no good. When releasing the brake, the video comes out.
When in the audio source, I put USB, it uses the original player, however, only with the parking brake applied does the video appear. Dropped, add the video and there is only music.
But from there using the source as "Audio Apps", from there I use a player and good.
I tried to buy the Honda Hack Pro to see if it improved, but I could not buy it. I'll go to PayPal and get there and say that the seller only accepts payments through his site and does not have the honda hack site.
Dude, about this new method, did you get / discover anything?
Or did you get it any other way?
Thanks, it works wit Egypt model
majedalanni said:
SORRY FOR MY ENGLISH
Finally I found a way to bypass the restriction method and play video while driving
anyone following these steps it total by his/her own risk and I'm not responsible to any issue might happen as I'm doing this for research purposes. for me it is working each time I'm doing it
1. Push your ignite button twice so you not be in accessory mode
2. Hold Bright power and menu until you see two choice click on the button on
3. Hold menu to get to another menu
4. Choose vehicle model information then vehicle setting type and you will see three types
TBAA:Gr013 DA KC No 4DR
TBAA:Gr013 DA KA No 4DR (this is the default one)
TBAA:Gr013 DA Kx No 4DR
you will choose
TBAA:Gr013 DA KC No 4DR (you need to make sure you are in empty space area as the GPS need to be locked after rebooting and also make sure you are not in accessory mode)
5. After the device reboot hold bright power and menu again and choose functional setup and then other
6. You will see operation restricted turn it off
7. Also enable Pandora and then back to home menu
8. Now you have system that can be modified couple things while driving not like before like you can use the dial pad
9. Now phase two to watch videos
10. open the browser and type about:debug
11. then delete it and type file:/// and hit enter
12. you will see the file system files, scroll down and click on vendor then app folder
13. scroll down and you find whitelistservice apk file
14. NEVER NEVER NEVER click on any APK only whitelistservice apk (I WARN YOU!!!!!!!!!!!!!!!!!!!)
15. click on it and it will try to install then it fail
16. then back to the home screen and hold power till it asking for reboot. reboot your system and viola you can run browser and gallery to browse , watch you tube or videos
Might you need to turn off your lane camera as when ever you right signal it will stop your video
issues you may get with this method
App installer will not work
rear camera very rare can be delayed or lag
To revert the video thing then you need to setting then apps download section and you will see the white list service there then just uninstall it and you back to normal.. if it acting weird just reboot the unit
Now to things I figured it out
Any apk files that are android system files from version 4.2.2 it will fail with signature different from the one installed
AHA APK can be update it will not working good as it not design for car ( I got it from internet)
apklist.apk from Honda pilot it willing to install but it fail because the version that we have is newer (at least mine as it update to latest android version f190)
Any app you click on it will show gray install button but if you multitask and go to the browser and browse the path /data/data/usbtmp then you will see the file there and that path can install apk but it will fail again. what ever you do the file will delete from there.. i tried to unplugged the fuse and the file stayed there so I tried the to do the whitelistservice.apk that we did above as this will stop the service from running but looks the package installer call whielistlib and the lib check the signature too.
I tried to plug USB serial as I can see in the log android loading PL32XX driver and i change the USB from HOST to DEVICE from the hidden menu i got an Ethernet connection from the USB and I can see the internal sdcard not the system as it is MTP I think.
Rebooting the device and holding menu will get you in safe mode but it didn't help anything
Honda link when enabled it will open another port other than the 5000 (random) when you nmap for the HU IP
Tried most exploits on browser didn't work
Modified APK didn't working
I would we all work together and break the APK installing process.
Donate can accepted to by pizza and drink on paypal
Majedalanni at yahoo.com
Thanks guys for reading my post
Click to expand...
Click to collapse
Thanks for your advice, it works with Egypt model, But I tried to install the navigation app under the vendor folder. After restarting the head unit, I get a black screen and I can’t operate it again. Tried to remove the battery cable with no luck. Any advice!!!
Hi, what do I do if I am able to access that setting on my 2016 touring but only the one option is available and not all 3?
Problems
Does it cause ant any major problems ?
HELP!!! How to solve this problem?
I tried to install the navigation app under the vendor folder. After restarting the head unit, I get a black screen and I can’t operate it again. Tried to remove the battery cable with no luck. Any advice!!!
Blank Page after step 10
Hi everyone.
Could you give a little help?
My unit was already set to Operation as OFF because of that I started from step 10, but after put file:/// and push ENTER /GO my browser not showing any folder. Only blank page.
Do you could give some orientation?
By the way, my head unit is active USB Debug and Developer Mode on. Could be this reason?
Sorry for my restricted english.
Regards
Prezado Ezeqgaria,
Eu fiz esse método antes de usar o Hondahack (que tb funcionou, mas pela minha avaliação, deixou a central mais lenta). Seguindo o tutorial que o autor preparou eu consegui desbloquear os vídeos com o carro em movimento. Eu consigo assistir vídeos de um pen drive facilmente utilizando o player original. No seu caso, acredito que o Hondahack deve estar impedindo tal uso e sugiro desinstalar o Hondahack e tentar novamente (por sua conta e risco!).
Comigo deu certo. Bom, é isso, espero ter ajudado.
=========
I will make a short translation,
I tried this method in my brazilian Honda EXL 2017 and worked. But i believe that after you installed Hondahack this affected it. So i suggested you uninstall Hondahack i make all process again (for your onw risk). Hope could help you
ezeqgarcia said:
Olá, tudo bem?
Em primeiro lugar, estou escrevendo em português, porque vi que vc é brasileiro.... rsrsrs
Também tenho um Civic ELX, meu é 2018. Cara, consegui fazer todo o hack certinho com o HondaHack e tal.
Só que o desbloqueio para vídeo com o player original do carro, não consigo.
Até já consegui instalar outros players de vídeo, mas eles são ruins e não possuem o recurso integrado com o volante, apenas com touch na central.
A maioria dos players não avança pasta ou não avança música, etc.... não possuem recurso aleatório, etc....
O player original é top, ele tem vários recursos, porém, mesmo com o Hack, ele funciona apenas com o freio de estacionamento acionado.
Já executei aquela opção no HondaHack para ignorar o freio de estacionamento, mas não adianta. Ao liberar o freio, o vídeo sai.
Quando na fonte de áudio, ponho USB, ele usa o player original, porém, só com o freio de estacionamento acionado é que aparece o vídeo. Soltou, some o vídeo e fica só música.
Mas daí usando a fonte como "Audio Apps", daí consigo usar um player e de boa.
Tentei comprar o Honda Hack Pro pra ver se melhorava, mas não consegui comprar, pois, vou até o PayPal e chegando lá diz que o vendedor só aceita pagamentos pelo seu site e não tem o site do honda hack.
Cara, sobre esse método novo, você conseguiu/descobriu algo?
Ou conseguiu de alguma outra forma?
==============
Hello, how are you?
First of all, I'm writing in Portuguese, because I saw that you're Brazilian .... rsrsrs
I also have a Civic ELX, mine is 2018. Man, I was able to do all the right hack with HondaHack and such.
Only the unlock for video with the original player of the car, I can not.
I've even been able to install other video players, but they are bad and do not have the integrated feature with the steering wheel, just touch with the control panel.
Most players do not advance folder or forward music, etc .... have no random feature, etc ....
The original player is top, it has several features, but even with the Hack, it works only with the parking brake applied.
I already ran that option on HondaHack to ignore the parking brake, but that's no good. When releasing the brake, the video comes out.
When in the audio source, I put USB, it uses the original player, however, only with the parking brake applied does the video appear. Dropped, add the video and there is only music.
But from there using the source as "Audio Apps", from there I use a player and good.
I tried to buy the Honda Hack Pro to see if it improved, but I could not buy it. I'll go to PayPal and get there and say that the seller only accepts payments through his site and does not have the honda hack site.
Dude, about this new method, did you get / discover anything?
Or did you get it any other way?
Click to expand...
Click to collapse
In order to keep this thread clean, please use this one to discuss about Development, Support or Software Updates.
ROMs:
To avoid any possible issue, do not forget to backup your NVRAM so that you won't risk to lose your IMEI. How-to: http://www.anythingultimate.in/2015/11/how-to-backup-your-nvram-partition.html
Stock (Android 7.0)
- 20170829: https://mega.nz/#!tGgnXIia!AITcSq9KOvFhJvr52B4vXQfKN5PqUkv9UwGFRDNwkJI
DO NOT USE THE "Format All & Download" OPTION IF YOU CARE ABOUT YOUR IMEI! Choose "Firmware Upgrade" instead.
Previous Releases:
- 20170822: https://mega.nz/#!8HoXkD6A!wdawC1oCPjYWGsmTGE7zrZ2YF3cbggMi9UHlOMbmeWo
- 20170814: https://mega.nz/#!IfRUyTYK!79mgMoIrpi5G5wN9r5dR3eP1q857vDuu2LtLqrK5AAY
- 20170718: https://mega.nz/#!BHhA0IrA!UCjPq7vLbv8MFJafqXNnDtYpp9dDSUOKxL_hy5Ko8W0
Flash Tool
- Latest SP Flash Tool for Windows and Linux: https://mega.nz/#F!dYUm0TbB!SWeMLb5Wu1NbRzTPQ8-s_A
Recovery:
- TWRP 3.1.1 by @jemmini : https://mega.nz/#!lEUwBAzK!OSyygGsLE9UCRiHn91Fg6-kuGbXkgE2vnt7ihoWFNWw
Root:
Rooting Methods (if you are on Stock ROM)
- SuperSU (flashable using TWRP): http://forum.xda-developers.com/apps/supersu
Extras (Root-Only):
Customization
- Xposed Framework (not available on Nougat yet): http://forum.xda-developers.com/showthread.php?t=3034811
Useful Third-Party Apps:
Battery Life
- Amplify: https://play.google.com/store/apps/details?id=com.ryansteckler.nlpunbounce&hl=en
- Greenify: https://play.google.com/store/apps/details?id=com.oasisfeng.greenify&hl=en
HOW-TO Root, Install Custom Recovery (TWRP) and Restore Stock ROM guide: https://docs.google.com/presentation/d/1NJcDBkLk8zMwyv2BTqRjn2NB_ZOWKjP1fRpSVr44Oxk
Proudly provided by GearLabs (me)
Blinking the screen on BV8000 pro - is the problem of hardware and software?
Mamay2u said:
Blinking the screen on BV8000 pro - is the problem of hardware and software?
Click to expand...
Click to collapse
If the problem doesn't disappear after you restore the Stock ROM, then it is an hardware problem.
Hello,
the phone is not fully rooted, SuperSu binarys are not updateable and busy box cant be installed (my phone is encrypted).
Is there any solution to make Android multiuser/guestmode working on that phone?
Thx
Pappmann said:
Hello,
the phone is not fully rooted, SuperSu binarys are not updateable and busy box cant be installed (my phone is encrypted).
Is there any solution to make Android multiuser/guestmode working on that phone?
Thx
Click to expand...
Click to collapse
Have you followed my root guide?
About the guest/multiuser mode, you should be able to enable it by adding two lines to the build.prop file.
Code:
fw.show_multiuserui=1
fw.max_users=5
Alberto96 said:
Have you followed my root guide?
About the guest/multiuser mode, you should be able to enable it by adding two lines to the build.prop file.
Code:
fw.show_multiuserui=1
fw.max_users=5
Click to expand...
Click to collapse
i know, but that does not work, i also changed to
Code:
ro.ag.userswitch=yes
ro.remove.multiuser.switch=no
But User swich is not available in statusbar. When i add a new user, i can access to new profile but i cant switch back.
Pappmann said:
i know, but that does not work, i also changed to
Code:
ro.ag.userswitch=yes
ro.remove.multiuser.switch=no
But User swich is not available in statusbar. When i add a new user, i can access to new profile but i cant switch back.
Click to expand...
Click to collapse
They (Mediatek or the company who produces the software for Blackview) messed up the framework then.
Alberto96 said:
They (Mediatek or the company who produces the software for Blackview) messed up the framework then.
Click to expand...
Click to collapse
Is there any way to replace the statusbar/quick settings menu to stock android or a user shortcut in configuration menu or in launcher?
Im really thinking of buying this phone. My main worry is that the UBS-C port on works with the cable that comes with it and that regular headphones wont work with the headphone output on this phone. Can anyone make any of this clear?
Pappmann said:
Is there any way to replace the statusbar/quick settings menu to stock android or a user shortcut in configuration menu or in launcher?
Click to expand...
Click to collapse
Not that easy, you need to modify the SystemUI.apk.
hobs0n said:
Im really thinking of buying this phone. My main worry is that the UBS-C port on works with the cable that comes with it and that regular headphones wont work with the headphone output on this phone. Can anyone make any of this clear?
Click to expand...
Click to collapse
As regards the USB-C port, you can find compatible cables that fit (as long as the connector isn't too short, it works. For example, AUKEY ones are not compatible but iVoler ones yes), unfortunately though you are right for the headphone jack. As far as i know, there are no other headphones/earphones with a long plug.
20170814 Stock ROM added to first post.
Changelog:
- Minor bug fixes (Camera Blur issue)
Alberto96 said:
Not that easy, you need to modify the SystemUI.apk.
Click to expand...
Click to collapse
Does anyonehere have Experience to change the SystemUI.apk to stock android Statusbar/Quicksettings?
20170822 Stock ROM added to first post. Fixes all issues with Waze and Google Play. (for users being impacted by these issues)
Ciao @Alberto96 , ho da pochissimo acquistato questo grandissimo telefono dopo aver avuto il bv6000. Non mi dilungo... Ho seguito alla lettera la tua guida per il root, appena ho terminato il flash al primo avvio tenendo premuto v+ mi parte la recovery TWRP ma al riavvio successivo premendo sempre v+ mi si avvia la recovery originale.
In più riprovando e rimettendo TWRP ho seguito la procedura per installare supersu che sembra andare a buon fine ma al riavvio successivo non è tra le app e rimane sempre non rootato.
La versione di rom che ha è la V0.1_20170803_20170829-1811 è ho usato la tua versione di TWRP e di SP Flash Tool.
Cosa posso fare? Ti servono altre info? Grazie in anticipo per l'aiuto.
danielesr82 said:
Ciao @Alberto96 , ho da pochissimo acquistato questo grandissimo telefono dopo aver avuto il bv6000. Non mi dilungo... Ho seguito alla lettera la tua guida per il root, appena ho terminato il flash al primo avvio tenendo premuto v+ mi parte la recovery TWRP ma al riavvio successivo premendo sempre v+ mi si avvia la recovery originale.
In più riprovando e rimettendo TWRP ho seguito la procedura per installare supersu che sembra andare a buon fine ma al riavvio successivo non è tra le app e rimane sempre non rootato.
La versione di rom che ha è la V0.1_20170803 è ho usato la tua versione di TWRP e di SP Flash Tool.
Cosa posso fare? Ti servono altre info? Grazie in anticipo per l'aiuto.
Click to expand...
Click to collapse
Solo Inglese su XDA-Developers.
I'll summarize your question to let others who don't understand Italian know it. He is asking why the device keeps losing TWRP after a reboot, as well as SuperSU.
I guess the system partition gets mounted as read-only, thus, all changes won't get applied.
To be sure, after installing SuperSU, go to the TWRP's File Manager, browse to /system, and delete the "recovery-from-boot.p" file. Please make sure that the system partition is mounted before doing this, otherwise you will get a blank folder.
If you get an error, then it means that the system partition has been mounted as read-only. You will find the RW flag in the Settings menu.
Keep me informed
20170829 ROM added to first post, should fix all issues with camera focus.
I'm sorry to all for my bad English. Thanks for the help Alberto, it was mounted read-only.
Enabling it I managed to get on /system and delete the "recovery-from-boot.bak" file (I did not see any other names).
I tried again to install SuperSU and restart, to reflash TWRP and check that the file was always deleted, the memory enabled RW .... but at first I do not find SuperSU and I reboot the original recovery as well.
Now I'm trying again with another Windows but it does not change the situation.
PS: Looking at the log better when installing Super SU writes: Boot image patcher - Finding Boot Image - Boot image: / dev / block / mmcblk0p21 - extracting ramdisk - failure, aborting.
danielesr82 said:
I'm sorry to all for my bad English. Thanks for the help Alberto, it was mounted read-only.
Enabling it I managed to get on /system and delete the "recovery-from-boot.bak" file (I did not see any other names).
I tried again to install SuperSU and restart, to reflash TWRP and check that the file was always deleted, the memory enabled RW .... but at first I do not find SuperSU and I reboot the original recovery as well.
Now I'm trying again with another Windows but it does not change the situation.
PS: Looking at the log better when installing Super SU writes: Boot image patcher - Finding Boot Image - Boot image: / dev / block / mmcblk0p21 - extracting ramdisk - failure, aborting.
Click to expand...
Click to collapse
It sounds like a LZMA ramdisk then.
Could you try Magisk instead? https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
Alberto96 said:
It sounds like a LZMA ramdisk then.
Could you try Magisk instead? https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
Click to expand...
Click to collapse
I tried to install Magisk-v13.3.zip with TWRP just installed but:
Mounting /data/magisk.img to /magisk - Magisk image mount failed...
Install Lenovo Xiaoxin P11 Pro 2021 Original ROM (TB-J716F)
!!! ATTENTION !!!
WITH THE GUIDE YOU WILL LOSE ALL THE DATA ON YOUR DEVICE!
AFTER INSTALLATION, THE APPLIANCE WILL ONLY HAVE THE LANGUAGE (ENGLISH AND CHINESE).
I AM NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO THE DEVICE, USE AT YOUR OWN RISK.
The following requirements must be met:
* Unlocked Bootloader;
* Device with charged battery;
* USB cable working and of good quality (preferably the original cable of the device);
* Remove all devices connected to the computer's USB port to avoid failures;
* Download "Original ROM":
https://mirrors.lolinet.com/firmware/lenovo/Tab_P11_Pro_2021/TB-J716F/
* Download "QPST Tool (QFIL + Drivers)" (Tool to install Qualcomm ROM and Drivers):
https://qpsttool.com/qpst-tool-v2-7-496
* Download "Platform Tools SDK" (Command Line Tool):
https://developer.android.com/studio/releases/platform-tools
* Package without "ROM"
https://www.mediafire.com/file/goysykd3syfwzuz/Lenovo_Xiaoxin_P11_Pro_2021_(TB-J716F).zip/file
Installation:
1. Extract the "Original ROM"
* Create a folder on the desktop called "ROM"
* Extract the "Original ROM" inside the "ROM" folder created;
2. Install the "QPST Tool (QFIL + Drivers)" and Qualcomm USB Drivers:
* Extract the "QPST Tool (QFIL + Drivers)" on the desktop,
* Install "QPST Tool.exe";
* Enter the "Driver" folder and install Qualcomm USB Drivers.
3. Enable Tablet USB Debugging "USB Debugging":
* Open the device's "Settings" settings;
* Go to My Device "My Device" and tap "ZUI Version" several times until enable "Developer Options" developer setting;
* Go back to Settings "Settings" and go to General Settings "General Settings";
* Select the Developer Settings "Developer Options";
* Check the USB Debugging box "USB Debugging";
4. Start the Tablet in EDL Mode (Emergency Download Mode):
In EDL Mode the device screen remains off!
There are two ways to put the Tablet into EDL mode "Emergency Mode" (Choose only one "Mode")
Mode1 (For Tablet powered off or unable to start)
* Turn off the Tablet;
* Press and hold the Volume Up (+) button;
* Connect USB cable to Tablet and computer.
Mode2 (By Command Line using "Platform Tools SDK")
* Turn on and start the Tablet;
* Connect USB cable to Tablet and computer.
* Extract the "Platform Tools SDK" on the desktop;
* Open the computer's CMD and navigate to the extracted folder (platform-tools);
* Use the adb command "adb reboot edl";
* Wait for the device to restart in EDL mode.
5. This should now appear in the Windows device manager:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6. Configuration of the "QPST Tool (QFIL)":
* Start QFIL;
* The device port must be automatically recognized by QFIL (make sure the port is correct);
* Make the settings shown in the screenshot;
“Configuration” -> “FireHose Configuration” and set ufs in “device type” and click “Reset After Download” and press OK;
* In the main window of QFIL in "Select Programmer", press the button "Browse" (If the button is not accessible, continue the guide that when choosing "content.xml" QFIL will automatically choose the file "prog_firehose_ddr.elf")
Navigate to the "ROM" folder on the desktop, select the "prog_firehose_ddr.elf" file;
* In the QFIL main window under "Select Meta Build" and "Content XML", press the "Load Content" button;
Navigate to the "ROM" folder on the desktop, and select the "contents.xml" file
* Now click on Download Content "Download Content" and wait;
* The process takes about 2-5 minutes and your tablet will restart with "Original ROM".
7. Blocking the "Bootloader" (OPTIONAL)
Bootloader blocking is optional!
After Bootloader lock your Tablet will receive OTA and Widevine L1 updates for high resolution media!
The following requirements must be met:
* Enable USB Debugging "USB Debugging" in the "Developer Options" developer options (see step 3. of this guide);
* Download and install Lenovo USB drivers (LenovoUsbDriver):
https://www.mediafire.com/file/1bzfblquyofokgi/LenovoUsbDriver_v1.1.34.zip/file
* Download this tool (LockUnlockBootloader):
https://www.mediafire.com/file/51352hr83iz87g5/LockUnlockBootloader.zip/file
7.1
* Start your tablet normally on Android and connect to PC by USB cable;
* Extract the "LockUnlockBootloader.zip" file on the desktop;
* Enter the extracted "LockUnlockBootloader" folder and open the "LockBootloader.bat" batch file;
* On the CMD screen, press “Enter” and then “1” and confirm again.
* On your Tablet will ask if you want to lock the bootloader;
* Select with the “Volume Up(+) / Down(-) Buttons” and confirm with the “Power Button(Power)”.
Okay, your bootloader is now locked.
7.2 Bootloader Locking Problems
Only for those who are getting "Your device is corrupted" message.
To solve this you have to manually update to the latest version ZUI 13 before locking the bootloader again.
Follow the tutorial again with the "Original ROM" and follow these steps:
The process for updating manually is the following:
All updates must be installed in order from smallest to largest and all must be renamed to "update.zip"
1) Download the update;
2) Use a file explorer and move it to the root of your device;
3) Rename it to "update.zip"
4) Got to Settings => System Update => "Select the 3 dots top right and select 'Use the install package update'
Repeat these steps for each individual update
The order of updates are:
1) Stock ROM version (Chinês / Inglês)
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst
2) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.238_ST_210824
to
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108.zip
https://mega.nz/file/4h13DI4R#09imnGFk0c16CPNG635AYIClewuF5rXkiaj3xqGmjA8
3) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108
to
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115.zip
https://mega.nz/file/l5ljWChS#rL44OM0-PuIFGZWSwr46pJr5S8NcY0JuYH7ctEeVTNs
4) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115
to
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip
https://forum.xda-developers.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5522973/
5) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.430_ST_220113
to
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip
https://forum.xda-developers.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5598667/
So the version you need to be running before attempting to lock the bootloader is 13.1.555 so double check your version in Settings => My Device
Once you have done that you will have the Bootloader locked.
*Note this procedure works as of 25/5/22, it may change if there's a new update.
Credits to our friend "Rail-"
8. Unlock the "Bootloader" (OPTIONAL)
Bootloader unlocking is optional!
Only unlock if you intend to install "Custom ROM" or "ROOT" the device.
Before downgrading, make sure your current ROM is compatible!
The following requirements must be met:
* Enable USB Debugging "USB Debugging" and OEM Unlocking "OEM Unlocking" in developer options "Developer Options" (see step 3. of this guide);
* Download and install Lenovo "LenovoUsbDriver" USB drivers:
https://www.mediafire.com/file/1bzfblquyofokgi/LenovoUsbDriver_v1.1.34.zip/file
* Download this "LockUnlockBootloader" tool:
https://www.mediafire.com/file/51352hr83iz87g5/LockUnlockBootloader.zip/file
* Request "Bootloader" Unlock Image (sn.img) on Lenovo website:
https://www.zui.com/iunlock
It is necessary to inform the device's Serial Number and a valid Email to receive the file. The Serial Number can be obtained on the device box, on the label on the back of the device and on Android in Settings "Settings" -> My Device "My Device" -> Status "Status" -> Serial Number "Serial Number";
8.1
* Now you place the file directly in the “LockUnlockBootloader” program folder;
* Start the process with the batch file “UnlockBootloader.bat”;
* Done, now your bootloader is unlocked and you can install custom ROMs on your Xiaoxin Pad Pro 2021 (TB-J716F).
Source and Links used for this guide.
Install Stock ROM - Xiaoxin Pad Pro 2021 [TB-J716F]
How to install Stock ROM - Xiaoxin Pad Pro 2021 [TB-J716F] I tried installing a GSI-ROM on this tablet, which basically worked except for three/four bugs I coulnd't solve. So I tried to restore the Stock ROM in the meantime and will share my...
forum.xda-developers.com
Install Stock ROM - Xiaoxin Pad Pro 2021 [TB-J716F]
How to install Stock ROM - Xiaoxin Pad Pro 2021 [TB-J716F] I tried installing a GSI-ROM on this tablet, which basically worked except for three/four bugs I coulnd't solve. So I tried to restore the Stock ROM in the meantime and will share my...
forum.xda-developers.com
Original ROM installieren: Lenovo Xiaoxin Pad Pro 2021 (TB-J716F)
Hier: Mit dieser Anleitung könnt ihr die Shop Fake ROM eures Xiaoxin Pad Pro 2021 ersetzen. Lock und Unlock Bootloader. ➜ Jetzt lesen!
www.chinahandys.net
Install Stock ROM - Xiaoxin Pad Pro 2021 [TB-J716F]
How to install Stock ROM - Xiaoxin Pad Pro 2021 [TB-J716F] I tried installing a GSI-ROM on this tablet, which basically worked except for three/four bugs I coulnd't solve. So I tried to restore the Stock ROM in the meantime and will share my...
forum.xda-developers.com
THANK YOU SO MUCH TO THE COLLABORATORS!
******************************************************************************************
******************************************************************************************
VERSÃO ORIGINAL DO GUIA EM PORTUGUÊS (BR)
******************************************************************************************
******************************************************************************************
Instale uma ROM original Lenovo Xiaoxin P11 Pro 2021 (TB-J716F)
!!! ATENÇÂO!!!
COM O GUIA VOCÊ PERDERÁ TODOS OS DADOS DO SEU APARELHO!
APÓS A INSTALAÇÃO, O APARELHO VAI POSSUIR SOMENTE O IDIOMA (INGLÊS E CHINÊS).
NÃO SOU RESPONSÁVEL POR QUALQUER DANO CAUSADO NO APARELHO, USE POR SUA CONTA E RISCO.
Os seguintes requisitos devem ser atendidos:
* Bootloader Desbloqueado;
* Aparelho com bateria carregada;
* Cabo USB funcionando e de boa qualidade (de preferência o cabo original do aparelho);
* Retire todos os aparelhos conectados na porta USB do computador para evitar falhas;
* Baixe "ROM Original":
https://mirrors.lolinet.com/firmware/lenovo/Tab_P11_Pro_2021/TB-J716F/
* Baixe o "QPST Tool (QFIL + Drivers)" (Ferramenta para instalar a ROM e Drivers da Qualcomm):
https://qpsttool.com/qpst-tool-v2-7-496
* Baixe o "SDK Plataform Tools" (Ferramenta para linha de comando):
https://developer.android.com/studio/releases/platform-tools
* Pacote sem "ROM"
https://www.mediafire.com/file/goysykd3syfwzuz/Lenovo_Xiaoxin_P11_Pro_2021_%28TB-J716F%29.zip/file
Instalação:
1. Extraia a "ROM Original"
* Crie uma pasta na área de trabalho chamada "ROM"
* Extraia a "ROM Original" dentro da pasta "ROM" criada;
2. Instalando o "QPST Tool (QFIL + Drivers)" e os Drivers USB da Qualcomm:
* Extraia o "QPST Tool (QFIL + Drivers)" na área de trabalho,
* Instale o "QPST Tool.exe";
* Entre na pasta "Driver" e faça a instalação dos Drivers USB da Qualcomm.
3. Ative a Depuração USB "USB Debugging" do Tablet:
* Abra as configurações "Settings" do aparelho;
* Vá para o Meu Dispositivo "My Device" e toque na "ZUI Version" várias vezes até abilitar a configuração de desenvolvedor "Developer Options";
* Volte para Configurações "Settings" e vá para Configurações Gerais "General Settings";
* Selecione a Cofiguração de Desenvolvedor "Developer Options";
* Marque a caixa de Depuração USB "USB Debugging";
4. Iniciar o Tablet no Modo EDL (Modo de Download de Emergência):
No Modo EDL a tela do aparelho permanece desligada!
Existe duas maneiras de colocar o Tablet no modo EDL "Modo de Emergência" (Escolha apenas um "Modo")
Modo1 (Para Tablet desligado ou que não puder ser iniciado)
* Desligue o Tablet;
* Pressione e segure o botão Volume Cima (+);
* Conecte o cabo USB no Tablet e no computador.
Modo2 (Por Linha de Comando utilizando o "SDK Plataform Tools")
* Ligue e inicie o Tablet;
* Conecte o cabo USB no Tablet e no computador.
* Extraia o "SDK Plataform Tools" na área de trabalho;
* Abra o CMD do computador e navegue até a pasta extraida (platform-tools);
* Use o comando adb "adb reboot edl";
* Espere o aparelho reiniciar no modo EDL.
5. Agora isso deve aparecer no gerenciador de dispositivos do Windows:
6. Configuração do "QPST Tool (QFIL)":
* Inicie o QFIL;
* A porta do aparelho deve ser reconhecida automaticamente pelo QFIL (certifique-se que a porta está correta);
* Faça as configurações mostradas na captura de tela;
“Configuration” -> “FireHose Configuration” e defina ufs em “device type” e clique em “Reset After Download” e aperte OK;
* Na janela principal do QFIL em "Select Programmer", aperte o botão "Browse" (Se o botão não estiver acessível, continue o guia que ao escolher o "content.xml" o QFIL escolherá automaticamente o arquivo "prog_firehose_ddr.elf");
Navegue até a pasta "ROM" no desktop, selecione o arquivo "prog_firehose_ddr.elf";
* Na janela principal do QFIL em "Select Meta Build" e "Content XML", aperte o botão "Load Content";
Navegue até a pasta "ROM" no desktop, e selecione o arquivo "contents.xml"
* Agora clique em Baixar Conteúdo "Download Content" e aguarde;
* O processo leva cerca de 2 a 5 minutos e seu tablet será reiniciado com a "ROM Original".
7. Bloqueio do "Bootloader" (OPCIONAL)
O bloqueio do Bootloader é opcional!
Após o bloqueio do Bootloader seu Tablet receberá atualizações OTA e Widevine L1 para medias de alta resolução!
Os seguintes requisitos devem ser atendidos:
* Ative a Depuração USB "USB Debugging" nas opções do desenvolvedor "Developer Options" (veja o passo 3. deste guia);
* Baixe e instale os drivers USB Lenovo (LenovoUsbDriver):
https://www.mediafire.com/file/1bzfblquyofokgi/LenovoUsbDriver_v1.1.34.zip/file
* Baixe esta ferramenta (LockUnlockBootloader):
https://www.mediafire.com/file/51352hr83iz87g5/LockUnlockBootloader.zip/file
7.1
* Inicie seu tablet normalmente no Android e conecte ao PC pelo cabo USB;
* Extraia o arquivo "LockUnlockBootloader.zip" na área de trabalho;
* Entre na pasta "LockUnlockBootloader" extraida e abra o arquivo de lote "LockBootloader.bat";
* Na tela do CMD aperte “Enter” e depois “1” e confirme novamente.
* No seu Tablet vai perguntar se você deseja bloquear o bootloader;
* Selecione com os “Botões Aumentar(+) / Diminuir Volume(-)” e confirme com o “Botão Liga/Desliga(Power)”.
Pronto, seu bootloader já está bloqueado.
7.2 Problemas de bloqueio do "BootLoader"
Apenas para aqueles que estão recebendo a mensagem "Seu dispositivo está corrompido"
Para resolver isso, você deve atualizar manualmente para a versão mais recente do ZUI 13 antes de bloquear o bootloader novamente.
Siga o tutorial novamente com a "ROM Original" e siga estes passos:
O processo de atualização manual é o seguinte:
Todas as atualizações devem ser instaladas na ordem do menor para o maior e todas devem ser renomeadas para "update.zip"
1) Baixe a atualização;
2) Use um explorador de arquivos e mova-o para a raiz do seu aparelho;
3) Renomeie para "update.zip"
4) Acesse Configurações "Settings" => Atualização do Sistema "System Update" => "Selecione os 3 pontos no canto superior direito e escolha o arquivo"
Repita essas etapas para cada atualização individual
A ordem das atualizações é:
1) ROM Original versão (Chinês / Inglês)
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst
2) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.238_ST_210824
para
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108.zip
https://mega.nz/file/4h13DI4R#09imnGFk0c16CPNG635AYIClewuF5rXkiaj3xqGmjA8
3) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108
para
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115.zip
https://mega.nz/file/l5ljWChS#rL44OM0-PuIFGZWSwr46pJr5S8NcY0JuYH7ctEeVTNs
4) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.364_ST_211115
para
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip
https://forum.xda-developers.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5522973/
5) TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.430_ST_220113
para
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZU...zip
https://forum.xda-developers.com/at...j716f_cn_open_user_q00209-3_r_zu-zip.5598667/
Portanto, a versão que você precisa estar executando antes de tentar bloquear o bootloader é 13.1.555, então verifique sua versão nas configurações "Settings" => Meu Dispoditivo "My Device"
Feito isso, você terá o Bootloader bloqueado.
*Observe que este procedimento funciona a partir de 25/5/22, pode ser alterado se houver uma nova atualização.
Créditos ao nosso amigo "Rail-"
8. Desbloquear o "Bootloader" (OPCIONAL)
O desbloqueio do Bootloader é opcional!
Só faça o desbloqueio se você pretende instalar "Custom ROM" ou fazer "ROOT" no aparelho.
Antes de realizar um downgrade, tenha certeza que sua ROM atual é compativel !
Os seguintes requisitos devem ser atendidos:
* Ative a Depuração USB "USB Debugging" e o Desbloqueio OEM "OEM Unlocking" nas opções do desenvolvedor "Developer Options" (veja o passo 3. deste guia);
* Baixe e instale os drivers USB Lenovo"LenovoUsbDriver":
https://www.mediafire.com/file/1bzfblquyofokgi/LenovoUsbDriver_v1.1.34.zip/file
* Baixe esta ferramenta "LockUnlockBootloader":
https://www.mediafire.com/file/51352hr83iz87g5/LockUnlockBootloader.zip/file
* Solicite a Imagem de Desbloqueio do "Bootloader" (sn.img) no site da Lenovo:
https://www.zui.com/iunlock
É necessário informar o Número de Série do aparelho e um Email válido para receber o arquivo. O Número de Série pode ser obtido na caixa do aparelho, na etiqueta atrás do aparelho e no Android nas Configurações "Settings" -> Meu Dispositivo "My Device" -> Status "Status" -> Número de Série "Serial Number";
8.1
* Agora você coloca o arquivo diretamente na pasta do programa “LockUnlockBootloader”;
* Inicie o processo com o arquivo de lote “UnlockBootloader.bat”;
* Pronto, agora seu bootloader está desbloqueado e você pode instalar ROMs personalizadas no seu Xiaoxin Pad Pro 2021 (TB-J716F).
Fonte e Links utilizados para esse guia.
Install Stock ROM - Xiaoxin Pad Pro 2021 [TB-J716F]
How to install Stock ROM - Xiaoxin Pad Pro 2021 [TB-J716F] I tried installing a GSI-ROM on this tablet, which basically worked except for three/four bugs I coulnd't solve. So I tried to restore the Stock ROM in the meantime and will share my...
forum.xda-developers.com
Install Stock ROM - Xiaoxin Pad Pro 2021 [TB-J716F]
How to install Stock ROM - Xiaoxin Pad Pro 2021 [TB-J716F] I tried installing a GSI-ROM on this tablet, which basically worked except for three/four bugs I coulnd't solve. So I tried to restore the Stock ROM in the meantime and will share my...
forum.xda-developers.com
Original ROM installieren: Lenovo Xiaoxin Pad Pro 2021 (TB-J716F)
Hier: Mit dieser Anleitung könnt ihr die Shop Fake ROM eures Xiaoxin Pad Pro 2021 ersetzen. Lock und Unlock Bootloader. ➜ Jetzt lesen!
www.chinahandys.net
Install Stock ROM - Xiaoxin Pad Pro 2021 [TB-J716F]
How to install Stock ROM - Xiaoxin Pad Pro 2021 [TB-J716F] I tried installing a GSI-ROM on this tablet, which basically worked except for three/four bugs I coulnd't solve. So I tried to restore the Stock ROM in the meantime and will share my...
forum.xda-developers.com
MUITO OBRIGADO AOS COLABORADORES!
Edit: I decided to do it anyway, but after QFIL flash is done, I got this “Your device is corrupt…” message.
Did you follow this guide??
Explain to me better how you performed the process and the conditions your device was in... like:
-Bootloader was unlocked?
-Which ROM was the device?
-Did you do any Updates with the Bootloader unlocked?
Try to force EDL mode (part 4. Mode1 of this guide) and redo the guide !
I made this tutorial based on 3 topics, and for me it worked well
Oh no I forgot to unlock bootloader, I never unlocked it, just want to reinstall original rom to get L1 back. So now it’s bricked?
Is there any way to unlock bootloader at this stage?
duonglv said:
Is there any way to unlock bootloader at this stage?
Click to expand...
Click to collapse
Hi
At the end of this guide talks about locking and unlocking Bootloader, see if it works for you
Original ROM installieren: Lenovo Xiaoxin Pad Pro 2021 (TB-J716F)
Hier: Mit dieser Anleitung könnt ihr die Shop Fake ROM eures Xiaoxin Pad Pro 2021 ersetzen. Lock und Unlock Bootloader. ➜ Jetzt lesen!
www.chinahandys.net
Awesome compilation.
I followed the steps and get all OTA and widevine L1.
Thank you very much.
duonglv said:
Is there any way to unlock bootloader at this stage?
Click to expand...
Click to collapse
Hi #duonglv
I faced the same problem when I was trying to lock the bootloader. The reason was that I thought the USB driver installed on step 2 was the same required on step 7 but they are not. On step 2 we need to install QUALCOMM USB driver and on step 7 it is LENOVO USB driver. After I installed the LENOVO USB driver I could get the same screen showed by #CleberJorge asking if we would like to lock the bootloader. I hope this tip works for you.
Thanks man for this detailed guideline. It worked fantastically well!
Muito obrigado Jorge. São pessoas como vc que nos faz não perder a esperança na sociedade. O uso correto de uma rede social. Resolver problemas através do compartilhamento de conhecimento.
hi guys
I followed instructions to flash the original rom
worked and booted
however, i missed the step on locking the bootloader after updating to 13.1.555 (i tried locking it after flashing original rom)
the device rebooted, informed me that it's corrupt and won't boot, then proceed to go into recovery mode/fastboot
my device will only boot to fastboot now
flashing original rom doesn't work
it also says device state - locked
can someone guide me?
thanks!
blanket said:
hi guys
I followed instructions to flash the original rom
worked and booted
however, i missed the step on locking the bootloader after updating to 13.1.555 (i tried locking it after flashing original rom)
the device rebooted, informed me that it's corrupt and won't boot, then proceed to go into recovery mode/fastboot
my device will only boot to fastboot now
flashing original rom doesn't work
it also says device state - locked
can someone guide me?
thanks!
Click to expand...
Click to collapse
You have lock the bootloader without getting the latest ROM.
All you have to do is to follow the guides again from start. unlocked the bootloader and flash the original ROM.
After this, follow the guide above for the 7.2 Bootloader Locking Problems
localbus said:
You have lock the bootloader without getting the latest ROM.
All you have to do is to follow the guides again from start. unlocked the bootloader and flash the original ROM.
After this, follow the guide above for the 7.2 Bootloader Locking Problems
Click to expand...
Click to collapse
Yup you’re right on the cause
I tried flashing back the original rom but it didn’t fix it
However, an hour back, I tried unlocking my bootloader with sn.img and reflashed the original rom
My device works now. Thanks!
i also have the device is corrupt issue and am only able to access fastboot. When i have tried to unlock my bootloader with sn.img it says the serial number is not matched. My serial number on the fastboot screen is different to the one on the back of the device. I also tried getting a sn.img of serial number on the fastboot screen and it is not recognised as valid on zui iunlock. Is there any fix for this or am I screwed?
Blokester said:
i also have the device is corrupt issue and am only able to access fastboot. When i have tried to unlock my bootloader with sn.img it says the serial number is not matched. My serial number on the fastboot screen is different to the one on the back of the device. I also tried getting a sn.img of serial number on the fastboot screen and it is not recognised as valid on zui iunlock. Is there any fix for this or am I screwed?
Click to expand...
Click to collapse
It sounds like your fpinfo partition got deleted. Try the guide here https://forum.xda-developers.com/t/...f-p11-pro-xiaoxin-2021.4448469/#post-86923725
Spoiler: Portuguese
@CleberJorge amigo, vc tem esse update em algum outro server ?
https://mega.nz/file/4h13DI4R#09imnGFk0c16CPNG635AYIClewuF5rXkiaj3xqGmjA8
pelo mega não estou conseguindo finalizar o download.
If someone have this update on another server, please let me know.
**Mod Edit: English translation provided**
friend, do you have this update on any other server?
2.77 GB file on MEGA
mega.nz
by mega I am not able to finish the download.
If someone has this update on another server, please let me know.
JobinFerreira said:
@CleberJorge amigo, vc tem esse update em algum outro server ?
https://mega.nz/file/4h13DI4R#09imnGFk0c16CPNG635AYIClewuF5rXkiaj3xqGmjA8
pelo mega não estou conseguindo finalizar o download.
If someone have this update on another server, please let me know.
Click to expand...
Click to collapse
I attached the link for 2 qpst stock firmware:-
1) from zui 12
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst.zip
drive.google.com
2) from zui 13
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.430_ST_220113_qpst.rar
drive.google.com
goodluck and happy try
gunalarix8 said:
I attached the link for 2 qpst stock firmware:-
1) from zui 12
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.211_ST_210730_qpst.zip
drive.google.com
2) from zui 13
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.430_ST_220113_qpst.rar
drive.google.com
goodluck and happy try
Click to expand...
Click to collapse
Thanks, but I think you sent me different ones, I nedd the update:
TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108.zip
Do you have the link ?
Edit: solved.
JobinFerreira said:
@CleberJorge friend, do you have this update on any other server?
https://mega.nz/file/4h13DI4R#09imnGFk0c16CPNG635AYIClewuF5rXkiaj3xqGmjA8
pelo mega não estou conseguindo finalizar o download.
If someone have this update on another server, please let me know.
Click to expand...
Click to collapse
Spoiler: Portuguese
Bom dia!
Eu não tenho outros links, na verdade esse link é compartilhado entre o pessoal do forum.
Faz o seguinte se for por causa do limite de download do mega:
Baixe um gerenciador de download (Jdownloader por exemplo) e espere o tempo necessario para continuar o download.
flw
**Mod edit: Translation provided**
Good Morning! I don't have any other links, in fact this link is shared among the forum staff. Do the following if it is because of the mega download limit: Download a download manager (Jdownloader for example) and wait the necessary time to continue the download. bye
Spoiler: Portuguese
Alguém consegue me ajudar a desbloquear o bootloader? O tablet não liga. Eu conectei-o no computador, baixei o aplicativo e a sn.img, mas ao abrir o cmd do aplicativo ele fica "searching for device", mesmo eu ligando o tablet (que só fica no modo de fastboot) ou segurando o volume +
**Mod edit: Translation provided**
Can anyone help me to unlock the bootloader? The tablet does not turn on. I connected it to the computer, downloaded the application and the sn.img, but when I open the application's cmd it says "searching for device", even if I turn on the tablet (which is only in fastboot mode) or hold down the volume
GeraldoNeto3 said:
Spoiler: Portuguese
Alguém consegue me ajudar a desbloquear o bootloader? O tablet não liga. Eu conectei-o no computador, baixei o aplicativo e a sn.img, mas ao abrir o cmd do aplicativo ele fica "searching for device", mesmo eu ligando o tablet (que só fica no modo de fastboot) ou segurando o volume +
**Mod edit: Translation provided**
Can anyone help me to unlock the bootloader? The tablet does not turn on. I connected it to the computer, downloaded the application and the sn.img, but when I open the application's cmd it says "searching for device", even if I turn on the tablet (which is only in fastboot mode) or hold down the volume
Click to expand...
Click to collapse
im sorry, i dont know i cant write in portuguese, my bad