Database Info

Invalid Package File (Google Market)

Hello,
I'm new to all this rooting malaki, I have installed Team EOS build of Jelly Bean and rooted my Xoom also I have installed Google Apps. Now when I try and download an application I get "Package file is invalid"
I have done a factory reset several times and still nothing, all clearing the cahce, I can't seem to clear Dalvik cahce though, I get an error "unknown volume for path [/sd-ext].
Please help,

I'm new to rooting too so I can't offer any great tech support I will say have you flashed the correct rom for your version of Xoom? It pays to add your version on here if asking a question as it saves time in everyone asking. Did you follow guide and use cwm recovery? I'm not sure if it will help but there is a fix permissions utility in recovery mode but I'm sure the very helpful clever people on here will help just add more info like Xoom version, which team eos jb rom and gapps you flashed?
Sent from my MZ601 using xda app-developers app

AnonJ0n said:
Hello,
I'm new to all this rooting malaki, I have installed Team EOS build of Jelly Bean and rooted my Xoom also I have installed Google Apps. Now when I try and download an application I get "Package file is invalid"
I have done a factory reset several times and still nothing, all clearing the cahce, I can't seem to clear Dalvik cahce though, I get an error "unknown volume for path [/sd-ext].
Please help,
Click to expand...
Click to collapse
Pretty sure that error is normal on certain recoveries and can be ignored. As for your problem, oldgrowler is right, we would need to know what hardware you have and what files your flashing. It's quite possible you got a bad download of the files as well so re-downloading the rom and gapps may be prudent.

Thanks for the reply's.
I'm abit confused on the definition of flashing. I keep downlaoding all the nightly builds of the Team EOS Motorola Xoom WIFI. Still nothing. What does flashing mean? I always go into CWM and install from zip.
Thanks

AnonJ0n said:
Thanks for the reply's.
I'm abit confused on the definition of flashing. I keep downlaoding all the nightly builds of the Team EOS Motorola Xoom WIFI. Still nothing. What does flashing mean? I always go into CWM and install from zip.
Thanks
Click to expand...
Click to collapse
"install from zip" IS flashing.
Filenames of what your installing? (several of the nightly builds will cause problems, plus certain gapps packages are too big for the xoom with JB)
You probably should be using EOS-wingray-20120725-125.zip and gapps-jb-20120722-eos-signed.zip
1. Format /system (just incase something has gotten stuck.)
2. Wipe dalvik + cache
3. Flash EOS-wingray-20120725-125.zip
4. Flash gapps-jb-20120722-eos-signed.zip

airesch said:
"install from zip" IS flashing.
Filenames of what your installing? (several of the nightly builds will cause problems, plus certain gapps packages are too big for the xoom with JB)
You probably should be using EOS-wingray-20120725-125.zip and gapps-jb-20120722-eos-signed.zip
1. Format /system (just incase something has gotten stuck.)
2. Wipe dalvik + cache
3. Flash ]EOS-wingray-20120725-125.zip
4. Flash gapps-jb-20120722-eos-signed.zip
Click to expand...
Click to collapse
Ill give that ago, I was using the wingray 22/07/12 build for both. Also I have this problem. I can't seem to clear Dalvik cahce though, I get an error "unknown volume for path [/sd-ext]. Should I install a new recovery?

Dalvik cache wipe: I told you, "Pretty sure that error is normal on certain recoveries and can be ignored."

airesch said:
Dalvik cache wipe: I told you, "Pretty sure that error is normal on certain recoveries and can be ignored."
Click to expand...
Click to collapse
Thanks ill try that. But I don't think my device propperly wiped everything. I booted it back p after the factory reset and it ran setup on my previous rom. Then when it ahd finished I had Play Store pre installed.
Any help?
Thanks

Am not sure which recovery you are using,
Thru adb install this, you will be fine then.
http://goo.im/devs/teameos/recoveries/wingray/eos-recovery-r6.img
Sent from my MZ601 using Tapatalk 2

wesamothman said:
Am not sure which recovery you are using,
Thru adb install this, you will be fine then.
Sent from my MZ601 using Tapatalk 2
Click to expand...
Click to collapse
How do I remove my other recovery? Thanks allot

You don't remove, it will be overwritten.
Sent from my MZ601 using Tapatalk 2

I rechecked your post. That error is normal. Don't worry about it. Just answer this for now, can you access your external SD card from your current recovery?
Sent from my MZ601 using Tapatalk 2

wesamothman said:
I rechecked your post. That error is normal. Don't worry about it. Just answer this for now, can you access your external SD card from your current recovery?
Sent from my MZ601 using Tapatalk 2
Click to expand...
Click to collapse
Well I over-write the Clockwork mod and it didn't work, so I was going to manually fastboot and flash the img, but it's not working. it says waiting for device....

Make sure USB debugging is enabled.
Sent from my MZ601 using Tapatalk 2

wesamothman said:
Make sure USB debugging is enabled.
Sent from my MZ601 using Tapatalk 2
Click to expand...
Click to collapse
It's enabled and fastboot reboot does nothing. I can use adb commands though

What is your device type? Mz60???
Never mind, I think is mz604...
Sent from my MZ601 using Tapatalk 2
---------- Post added at 11:22 AM ---------- Previous post was at 10:58 AM ----------
I think I can suggest you that you repeat the whole process again...
Note: please read this procedure carefully more than once until you are fully aware of it. If you have any doubts or concerns, just ask to avoid confusion before you apply. This should be followed step by step.
First, download the ROM and GAPPs and put them onto your xoom internal and external SD card. Put them under /mnt/sdcard or /storage/sdcard0 for internal sd, depending which ROM you already have now, ICS, JB, etc... , and place under the root of your external sd card.
To download:
• Get the Motorola USB drivers to your laptop: http://developer.motorola.com/docstools/USB_Drivers/
• Get the Android SDK to your laptop: http://developer.android.com/sdk/index.html
• Recovery Image: http://goo.im/devs/teameos/recoveries/wingray/eos-recovery-r6.img
• GAPPS: http://goo.im/devs/teameos/roms/eos3/gapps/gapps-jb-20120726-eos-signed.zip
• ROM: http://goo.im/devs/teameos/roms/eos3/nightlies/wingray/EOS-wingray-20120725-126.zip
Steps:
1. Power off your XOOM device.
2. Press and hold the volume down button while pressing the power button at the same time. Note: Even if your xoom starts again, just keep the button pressed until you see "Starting fastboot protocol" on the screen.
3. Connect Xoom to your computer via USB.
4. Open a ‘Command Prompt’ or ‘Terminal’ window on your computer in your sdk/tools folder. This is the sdk you downloaded above.
5. Unlock your xoom and flash the recovery image. The recovery image should be in your current working directory where you have command line navigated to:
Type:
adb reboot bootloader
fastboot oem unlock
fastboot flash recovery eos-recovery-r6.img
fastboot reboot
adb reboot recovery
Now, you have your device unlocked and recovery installed.
Reboot your xoom by selecting the option "reboot system now" from recovery. you can navigate up and down using the volume buttons. Once an option is highlighted, press the power button to select, you will still have your old ROM.
To flash the other ROM downloaded above,
1. Boot into recovery by:
i. As soon as you hit the reboot command above, you should see a Motorola logo appear. Wait 3 seconds and tap the Volume down button and the words Android Recovery should appear on the screen. When you see that, tap the Volume up button and you’ll boot into recovery.
2. From within Recovery, perform wipe data, wipe cache, and go to advanced, wipe dalvik cache and battery stats. Don't worry, if the ROM and GAPPs are deleted, which should not be the case, you will have them on your external sd card
Note: wipe data will delete your stuff on the xoom. It would be great if you backup your files that you need to your external sd card before you start any of this procedure.
3. In recovery, navigate to install zip from sdcard > choose zip from sd card and select the EOS ROM you copied to the root of the SD card. Once the files are flashed, DO NOT reboot afterwards. Hold on.
4. Again, from Recovery, choose install zip from sdcard > choose zip from sd card and select the GAPPs you copied to the root of the SD card.
Then hit reboot system now. It will take 2 - 3 minutes for the first reboot. Setup your google account. and you are good to go.
Later reboots will be much faster (around 40 - 50 seconds).
Hope this helps you...

Asus Padfone 2 - softbrick after SKU change + Fix

Hi Guys,
Just thought I'd provide a warning and a fix to a half day ordeal recovering from a soft-brick after wanting to make the switch from TW to WWE.
What made this all go wrong?
I have a Padfone 2 which had the latest TW_A68-10.4.17.15
I have a accidentally turned off adb USB debugging mode
The process:
I unlocked my bootloader using the ASUS official unlocker.
I had then install 2.7.0.1 twrp which didn’t work
Install 2.5.0.0 twrp which did.
Forgot to do a backup which I usually did, but guess I thought that I have done this so many times, nothing would go wrong.
DON’T GET COCKY BACKUP FIRST.
Opted for the easy way out and write to system VIA twrp using zip, which was reported to work.
This installed and didn’t report any error.
After reboot, app.phone and another OS programs crashed constantly and rebooted.
I removed my sim and this stopped the crashed apps, but not the reboots.
I realised I was in a whole world of trouble and it was only at this moment did I realise that I didn’t have USB Debugging turned on. Frantically tried to enable it in between reboots, but failed and was now presented with only a ASUS spinning circle of death, or even better later, only the which ASUS logo before it reached it.
All I had available was fastboot and twrp.
You’d think this was an easy fix, but I didn’t have a usable/original rom on the /data/media a.k.a /sdcard partition.
Note: have a handful of roms including your original rom saved on the phone before trying anything, as this phone has no access to external storage when all goes pear shaped.
I wiped caches, didn’t work.
I then wiped data, which then deleted the only rom I had access to. So I couldn’t even now retry installing from zip.
ADB didn’t work from any recovery including CWM 6.0.4.4
I was at a loss and didn’t know what to do.
The recovery:
Installed twrp 2.6.3.0 was persistent with ADB sideload, even though I didn’t have USB Debugging enabled.
Note: ADB sideload will still work even if you don’t have USB Debugging enabled. It’ll either take a min or two to register on your computer, but if not reboot and reboot again to get it to register.
Sideloaded the wrong firmware file again.
Note: If you are trying to sideload the original firmware, extract the zip “TW_PadFone2_user_10_4_17_15_UpdateLauncher.zip” and sideload the zip hiding within “ASUS” -> “Update” -> “TW_A68-10.4.17.15-0-ota-user.zip”
After another long time trying to get the ADB device to register, finally got a second chance and got back to the original firmware.
Did this deter me from the switch from TW to WWE. HELL NO!!
Enable ADB USB Debugging
Make sure you push the rom WWE to your /sdcard partition
How to do it right.
Load the original recovery attached recovery.stock.img
Reboot into recovery and select "apply update from external storage" and choose the zip file to flash.
This will fail! It's what it's meant to do
At this point the recovery changes the partition table and then restarts.
On reboot we will have a nice "Installation aborted", this because, being changed the partition table, the recovery can not find the file to flash as it the partition containing the data has been reformed losing its contents. So you will need to copy the file again via adb.
Select "wipe data / factory reset"
You need to do a wipe, because it formats the partition where we will send the file. Having just changed, the partition has not a file system and so it must be formatted to save something on it.
Upon rebooting to ADB stopped working under the stock recovery. It registered with my computer but the command to repush the WWE rom to /data/media kept failing.
Rebooted into fastboot and install twrp 2.6.3.0. At this stage as I knew that the partition table had been updated, I sideloaded the WWE rom, which works more reliably when it's originally enabled
Did a Wiped cache for safe measure
Reboot and welcome to another 2GBs of space and WWE firmware.
NOTE: Always flash the inner zip “TW_A68-10.4.17.15-0-ota-user.zip” not the outer zip “TW_PadFone2_user_10_4_17_15_UpdateLauncher.zip”

freak4916 said:
Load the original recovery attached recovery.stock.img
Click to expand...
Click to collapse
Where can I find this?

Need help with TF700T with Katkiss 6.0 installed

I recently bought a second hand TF700T that has been rooted with Katkiss 6.0 but it has numerous problems that I need to know which is the best way to resolve. This is what I have:
Model: TF700T
Android Version: 6.0.1
Kernel Version: 3.1.10 katkernel-tf700
Build: Katkiss-024.6.0.1
ClockworkMod Recovery v6.0.4.7
The problems I have are:-
1. It has no Play Store and I am able to download the apk file but 'can't read/open' so it won't install from download (yes I have allowed apps from unknown sources). I managed to pull the apk file using ADB but the Play Store simply opens and closes a white page.
2. If I go to settings there is a SuperSU – clicking on it I get 'Unfortunately, settings has stopped'. I don't think this should happen. I don't know how to check if Super SU Beta 2.52 is installed.
3. If I go to Accounts I have Personal (IMAP) and + Add Account where I only have Exchange and Personal (IMAP). So I can't seem to be able to select a Google Account.
Presently I have nothing on the tablet I need (i.e. no data I need to keep) so if I have to start again I am happy to do that but I'm just learning so saying 'flash the rom' or such is too vague for me at this stage. I'm also not sure what or how to get 'data as f2fs' if that is important.
If someone could assist with a clear step by step of how I might resolve these issues I'd be very grateful. Happy to provide any other info sought. Not sure if this was caused when the seller wiped his personal data before selling or what, he says Play Store was working, so don't know if he bungled the rooting or what.

I got your PM and first of all, congrats you did a good amount of reading and you are on the right track.
Your problems with Google account and Play Store are probably due to either the wrong gapps (Google apps) version or the previous owner did a wipe of /data and did not reflash properly. Yep, arm 6.0 is right, but it has to be the pico edition. Since you did buy the tablet used, it probably would be a good idea to start from scratch. At least you would then know that if something won't work, it's because of something you did.
And yes, I agree with the advice to flash the Kang TWRP recovery. I have no idea if CWM supports f2fs but I don't think so. Most people use TWRP as recovery - it's the right way to go.
So let's get you prepped:
Download the rom, gapps and SuperSU from the links in Tim's thread (first post) and put them on a microSD. http://forum.xda-developers.com/transformer-tf700/development/rom-t3282166
Then head here and download the flashable zip of the Kang TWRP recovery: http://forum.xda-developers.com/showpost.php?p=59299365&postcount=2
Also copy that to the microSD
Boot into CWM recovery, go to Install and navigate to the Kang TWRP zip.
To tell the truth I can't even remember if CWM supports the microSD but I think it does. If it doesn't you have to use adb to push the zip to internal memory and then flash it from there.
Anyway, flash the Kang TWRP and then reboot. Let it boot up, then turn the tablet off and boot via buttons (Power and Vol Down to get into bootloader, VolUp on flashing RCK) into recovery which should be TWRP at this time.
Go to Wipe > Format data > type "Yes" and go have a beer (did I mention the battery needs to be full before you start?). This will take 60 minutes plus and may look as if nothing happens but it does, don't mess with it!
Once that is done follow this guide to convert internal data to f2fs: http://forum.xda-developers.com/tra.../guide-convert-data-to-f2fs-twrp-2-8-t3073471
Start at step 4 and ignore any instructions related to data2sd/rom2sd.
Alright, now you got a squeaky clean tablet itching for a rom.
In TWRP go to Install > navigate to the microSD and select the rom zip. If you like, you can line up the other two files to be flashed right after the rom zip:
Touch: Add another zip, and repeat this for both the gapps and the supersu zips.
Or you flash them one by one - doesn't matter. But all 3 have to be flashed without rebooting in between and the rom has to be first!
Make sure "verify zip signature" is not checked, then swipe the button.
Have another beer
Once it's done, reboot to system and set up your new rom.
You definitely want to install the SuperSU app from the Play Store. You gain root by flashing the SuperSU zip, but you need the app to manage root.
If anything is unclear: Ask!
Have fun!

I'm up to the part where I get to have a beer...haaa. Wasn't all plain sailing. Having TWRP as an img file wasn't recognised on the sd card so I was unable to flash twrp that way. I managed to push twrp using ADB. (The small issue I had here originally was when I renamed the img file from say twrp-2.8.x.x-xxx.img to twrp.img (for ease of typing in adb) it was really twrp.img.img as it appears with a zip icon on my XP. After realising this it was straightforward after putting twrp.img into the adb folder and connecting the device and accessing the command prompt:
C:\adb>adb devices (to check I'm connected)
response:
List of devices attached
(numbers&letters here) device
C:/adb>adb reboot bootloader
This reboots the device into the bootloader and you hear the device buzz
C:/adb>fastboot flash recovery twrp.img
response
sending 'recovery' (7038kb)
Okay
writing 'recovery'
Okay
finished total time etc
then
c:/adb>fastboot reboot
rebooting....
I then used the power vol down buttons and yahoo I'm in TWRP and currently at the wipe data phase.
Can't tell you how much I appreciate this help and I'll repost a report after I get further along. Hope this helps others also.

Unexpected Clean Android waiting for a ROM
Beers were great. I finished the bit of 'convert internal data to f2fs' and thought when I rebooted, well don't know what I expected but 'squeaky clean tablet itching for a rom' wasn't a still present KatKiss rom logo start but that's what happened. Then I went to 'Install > navigate to the microSD and select the rom zip' and nothing on the SD card seemed to be recognised other than a self created 'LOST.DIR' directory so I copied the files into this directory ( Heh, at least it can see this directory). So I'm now in the process of installing KatKiss, Gapp 6 pico and SU User Beta.
If I'm on the wrong track here please let me know. Cheers
Paul;

No, you're doing good. You formatted /data, so did not touch /system where the rom lives. That's why your old room still boots. /system gets formatted during installation of the new rom = squeaky clean.
Sent from my Nexus 5X using Tapatalk

berndblb said:
No, you're doing good. You formatted /data, so did not touch /system where the rom lives. That's why your old room still boots. /system gets formatted during installation of the new rom = squeaky clean.
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
I've completed all the instructions - changed data to f2fs and then starting with the Katkiss, then Gapp pico and SuperSU (adding one zip after the other) and rebooted. Rebooted and device installed 73 apps and took me to a welcome screen with a language dropdown and a swipe button. I can access and change the language but the swipe button won't work so I'm locked on this screen. I went back to TWRP and pressed 'reboot' but what happened was the reboot button(located bottom right), settings button above it and the two bottom buttons on the left disappeared... so from there it wouldn't reboot. I had to hold the power button down to reboot and back in the flash screen but still can't get past that.

plato2 said:
I've completed all the instructions - changed data to f2fs and then starting with the Katkiss, then Gapp pico and SuperSU (adding one zip after the other) and rebooted. Rebooted and device installed 73 apps and took me to a welcome screen with a language dropdown and a swipe button. I can access and change the language but the swipe button won't work so I'm locked on this screen. I went back to TWRP and pressed 'reboot' but what happened was the reboot button(located bottom right), settings button above it and the two bottom buttons on the left disappeared... so from there it wouldn't reboot. I had to hold the power button down to reboot and back in the flash screen but still can't get past that.
Click to expand...
Click to collapse
Heck! I did not think we needed to check your bootloader if it had Katkiss on it, but now I think we do:
Boot into fastboot and read the tiny text top left. The part with 10.6.1...... is what we need

Bootloader problem now! More beer required....
berndblb said:
Heck! I did not think we needed to check your bootloader if it had Katkiss on it, but now I think we do:
Boot into fastboot and read the tiny text top left. The part with 10.6.1...... is what we need
Click to expand...
Click to collapse
OK, I went back to the wipe data bit and did it all again.... I noted that when installing the Katkiss, Gapps and SuperU zips I saw 2 lines:
checking for md5 file
skipping md5 check: No md5 file found
Have no idea if it matters or not....
OK the tiny writing at top on fastboot (why does this have to be so small....really).
Anyway it says:
Key Driver not found.. booting as
Android CardHU-User Bootloader <2.0 e> released by "ww_epad-10.6.1.14.10-2013601" A?3
It is hard to be exact with it that small so hope that helps, but the 10.6.1.14.10 is correct can't be as sure with the last numbers though.

Thinking about a solution
plato2 said:
OK, I went back to the wipe data bit and did it all again.... I noted that when installing the Katkiss, Gapps and SuperU zips I saw 2 lines:
checking for md5 file
skipping md5 check: No md5 file found
Have no idea if it matters or not....
OK the tiny writing at top on fastboot (why does this have to be so small....really).
Anyway it says:
Key Driver not found.. booting as
Android CardHU-User Bootloader <2.0 e> released by "ww_epad-10.6.1.14.10-2013601" A?3
It is hard to be exact with it that small so hope that helps, but the 10.6.1.14.10 is correct can't be as sure with the last numbers though.
Click to expand...
Click to collapse
I've done a bit of reading and I'm currently downloading ww_10_6_1_18_SDupdate.zip
I think my next step will be to unzip this file and find the T4_SDupdate file and put it on the sdmicro in root and boot into recovery. I'm guessing it will be located and the update begin. After that I'm not sure of what to expect. Will I have to go and flash twrp, wipe date, change to f2fs and install Katkiss,Gapps and SuperSU again? Will it matter if other files (TWRP, Katkiss, Gapps,SuperSU) are also on the microsd while this happens. If you could let me know if I'm on the right track that would be great.

plato2 said:
I've done a bit of reading and I'm currently downloading ww_10_6_1_18_SDupdate.zip
I think my next step will be to unzip this file and find the T4_SDupdate file and put it on the sdmicro in root and boot into recovery. I'm guessing it will be located and the update begin. After that I'm not sure of what to expect. Will I have to go and flash twrp, wipe date, change to f2fs and install Katkiss,Gapps and SuperSU again? Will it matter if other files (TWRP, Katkiss, Gapps,SuperSU) are also on the microsd while this happens. If you could let me know if I'm on the right track that would be great.
Click to expand...
Click to collapse
Sorry, that should be 22_10_26_1_18_SDupdate.zip

plato2 said:
Sorry, that should be 22_10_26_1_18_SDupdate.zip
Click to expand...
Click to collapse
Third time luck...(should be) ww_10_26_1_18_SDupdate.zip

plato2 said:
Third time luck...(should be) ww_10_26_1_18_SDupdate.zip
Click to expand...
Click to collapse
Don't do that!!
Whatever it is that is not firmware for the TF700!
You are on the latest bootloader, no reason to mess with it!!
---------- Post added at 09:29 AM ---------- Previous post was at 09:28 AM ----------
Give me some time, I'll get back to you
Sent from my Nexus 5X using Tapatalk

That was TF701 firmware you were thinking to flash. It is totally incompatible with your tablet and the T4 SD Update method works only with stock recovery. But all that aside....
Ok, what you experience is quite weird and I have no idea what caused it. Maybe a bad download maybe something went wrong during the flash - I have no idea...
So what is your situation now? Can you reboot from TWRP? Does the recovery work normally?
Because if not, that is the first thing you need to fix.
You may want to reflash TWRP anyway - just to be sure it did not get corrupted. You know how to flash in fastboot - excellent! Then let's do it that way.
Download from the first link for Kang TWRP 2.8.7.4. https://www.androidfilehost.com/?fid=24352994023705509
Look at the info under "Download information" on that page: You'll see the md5 checksum for that file. That is control value to make sure the file you downloaded is complete and not corrupted.
You'll need a small program like Hashtab on your PC to check the md5. Install it, then right click on a zip, go to Properties and there you'll see a new tab: FileHashes. Copy the string from the download page into the "Compare" box and it instantly tells you if the file you have on your PC matches the one on the server. TWRP has a feature that it will compare the md5 if you have it along with the zip in form of a small text file on your microSD. If it doesn't find a md5 it just skips the integrity check.
Your microSD - something else to check. That TWRP doesn't see the downloaded files unless they are in the LOST directory is totally crazy. How is that microSD formatted? You got another one you can use? One that actually works and does not add another question mark to this situation? If not, at least format the microSD to fat32 on your PC, load your files and then check if TWRP sees them. Also check the md5 AFTER copying the files to the card.....
Do that with all the files you downloaded.
So, first thing is to flash TWRP again. Then make sure it works, you can reboot from it etc.
Then just perform a quick wipe in TWRP. From Home select Wipe > swipe the button > done
Then reflash the rom zip, gapps and supersu on which you checked the md5.
Let me know how that goes.....

Thanks for that info. No I wasn't going to do anything stupid without you OKing it first.
I redownloaded Kang TWRP 2.8.7.4 and pushed it again successfully with adb no problem. I am still unable to reboot from bootloader using adb or pressing reboot... these problems weren't present prior to installing Katkiss, Gapps and SuperSU. Still frozen on front screen of rom. I put the twrp.img file onto the micro SD Card and tried to flash. It gives me an option to select staging which I didn't tick so it tells me no partitions selected for flashing. Didn't want to tick something and stuff it up. I think TWRP is OK as it did work fine before I installed the other 3 programs.
The micro SD is fine it's FAT32 formatted. The issue with the recovery program not seeing the zip files in the root dir was when I was using CWM - no longer a problem.

plato2 said:
Thanks for that info. No I wasn't going to do anything stupid without you OKing it first.
I redownloaded Kang TWRP 2.8.7.4 and pushed it again successfully with adb no problem. I am still unable to reboot from bootloader using adb or pressing reboot... these problems weren't present prior to installing Katkiss, Gapps and SuperSU. Still frozen on front screen of rom. I put the twrp.img file onto the micro SD Card and tried to flash. It gives me an option to select staging which I didn't tick so it tells me no partitions selected for flashing. Didn't want to tick something and stuff it up. I think TWRP is OK as it did work fine before I installed the other 3 programs.
The micro SD is fine it's FAT32 formatted. The issue with the recovery program not seeing the zip files in the root dir was when I was using CWM - no longer a problem.
Click to expand...
Click to collapse
There's some fundamental flaw in your thinking: You cannot flash the .img file in TWRP.
twrp_tf700t_kang_2.8.7.4.img - this file you have to flash in fastboot (fastboot flash recovery twrp_tf700t_kang_2.8.7.4.img)
twrp_tf700t_kang_2.8.7.4-signed.zip - this is the same recovery packaged into a flashable zip. This you can flash in recovery
I am still unable to reboot from bootloader using adb or pressing reboot... these problems weren't present prior to installing Katkiss, Gapps and SuperSU
Click to expand...
Click to collapse
You mean rebooting from recovery??? That sentence does not make sense. And something else is going on. Flashing a rom, gapps, supersu cannot have anything to do with your recovery not working properly. The recovery lives on it's own partition and boots from there.
Maybe time to take a break and retrace your steps. I cannot put my finger on it but somewhere you are doing something wrong.
Edit: Ha! Interesting! Just remembered that something changed in TWRP and yes, this latest version lets you flash an .img file to staging (from where it will get installed to it's proper partition during the next boot). I have no idea how solid this new feature is, so I'd still recommend falshing TWRP in fastboot.
But 2.8.7.4 works fine flashing Katkiss and associated files. Tried it myself this afternoon. All the components work. So the problem is most likely in the "how", not the "what".....

Sorry for the confusion. Really can't see what I may be doing wrong here. I followed exactly the same procedure as I did when I installed TWRP over CWM initially. I re-downloaded twrp_tf700t_kang_2.8.7.4.img , placed it in the adb folder and renamed it twrp.img. I then followed the same procedure I did originally:
C:\adb>adb devices (to check I'm connected)
response:
List of devices attached
(numbers&letters here) device
C:/adb>adb reboot bootloader
This reboots the device into the bootloader and you hear the device buzz
C:/adb>fastboot flash recovery twrp.img
response
sending 'recovery' (7038kb)
Okay
writing 'recovery'
Okay
finished total time etc
then
c:/adb>fastboot reboot
rebooting....
However, this time the response to the last command:
c:/adb>fastboot reboot
(waiting for device) and it hangs and the device doesn't reboot from recovery. However, all the other stuff before it is the same. Not sure what to try next.

plato2 said:
However, this time the response to the last command:
c:/adb>fastboot reboot
(waiting for device) and it hangs and the device doesn't reboot from recovery. However, all the other stuff before it is the same. Not sure what to try next.
Click to expand...
Click to collapse
Elaborate on this please.
You are in fastboot.
The command fastboot reboot does nothing?
Then what? Did you reboot manually?
You are not in recovery here, so i do not understand "the device does not reboot from recovery".....

Sorry, my lack of understanding. I suppose I mean I am in the bootloader which is where adb>reboot>bootloader puts me so that I can flash twrp.img. Then to get out of there and go back to the rom fastboot>reboot would put me back into the rom and I would get the response >rebooting. Now that doesn't happen it simply says (waiting for device)....So I have to reboot manually.

Just got home and playing around with it. I went into the bootloader and installed just the katkiss rom. It installed fine and then I clicked reboot and it rebooted no problem. But of course that doesn't give me any Play Store or SuperSU.... so there's still hope. So now I'm back in the bootloader and going to try the 3 together again and see what happens.Let you know shortly

Setup wizerd stopped - google play services stopped
plato2 said:
Just got home and playing around with it. I went into the bootloader and installed just the katkiss rom. It installed fine and then I clicked reboot and it rebooted no problem. But of course that doesn't give me any Play Store or SuperSU.... so there's still hope. So now I'm back in the bootloader and going to try the 3 together again and see what happens.Let you know shortly
Click to expand...
Click to collapse
So now when I install the katkiss, Gapps and SuperSU from TWRP and reboot I get 2 repeating messages Setup wizerd has stopped' and Google Play Services has stopped. It just goes from one to the other when I press OK....

Honor 8: Nougat (Android 7.x) B360 - TWRP and Root HOW TO

I'd like to create a new thread on installing TWRP and rooting Android Nougat (7.x) on version B360 of the Honor 8. All the threads I see are people frantically trying to restore their phone to their previous glory. To keep people from asking "will this work on yada yada model, *I* have a FRD-L04 which is the 32gb unlocked SINGLE SIM variant sold locally at Best Buy here in the states and I'm pretty sure the FRD-L09 is the international DUAL SIM version with 64GB and I believe firmware for both of these are different? If not, please correct me. The process should be the same for all variants, but the files used will be different.
I want to update this OP and keep it as up to date as possible. If we can get 3 or more people to confirm a certain process works in this thread, I will update it with the proper links to all tools/files/versions of TWRP and SuperSU as well as firmware that's needed. I think I currently count eleven different threads all over the place on this and would be nice to have it centralized. Let's help out and get this phone going with a working root on Nougat!!!
Here are the questions I propose:
1. What is the actual steps to root the Honor 8 running a FULL STOCK version of B360 (Android 7.x)?
A. Unlock Bootloader (This process should be the same as always)
B. Flash TWRP (Which version?) This should be a simple flash with fastboot
C. Flash SuperSU (Which version?) This should be a simple flash with TWRP
D. What are the current issues with this process? (encryption issues, formatting, unable to access the Data partition, etc)
E. How to revert back (and when I say back, I mean ANY working state of Nougat (Android 6.x) or Marshmallow(Android 7.x))
F. How to install extras (Xposed for example, etc)
If I can have answered the questions above, I will clean it up and move it over to the guide section. As it stands now we have no guide. We just need clarification on what works, what doesn't and the process.
Also, PLEASE be kind to those who don't speak English as their primary language. The Honor 8 is an international phone and I see many people getting angry because they don't understand or don't follow instructions correctly because the OP didn't clearly state what they did. Let's help each other out!
Here's an example step by step for unlocking the bootloader below. This is what I'd like to do for each of the questions above.
A: Unlocking the bootloader (UNDERSTAND THAT BY UNLOCKING THE BOOTLOADER ALL YOUR DATA ON THE PHONE WILL BE ERASED AS IF YOU'RE PULLING IT OUT OF THE BOX FOR THE FIRST TIME)
1. Go to Huawei's EMUI site and log in. If you need to create a new account, do so. Link here: http://www.emui.com/en/plugin/hwdownload/download
2. Click on the DOWNLOAD link at the top of the site.
3. Underneath the search field you will see a green link that says "Unlock Bootloader". Click it and follow the instructions. You will be asked to enter in several pieces of information about your phone.
4. Once you've filled out all the information, you will receive your unlock code at the bottom of the screen. Write this down and save it. This number will NEVER change.
5. On your Honor 8, go to Settings > About and tap on the Build Number seven times until you unlock the Developer Settings.
6. In Developer Settings, check Enable OEM Unlock.
7. Scroll down a bit more and check USB Debugging.
8. Go to Huawei's site and download their HiSuite and install it. This installs the OFFICIAL Honor 8 USB driver. Link here: http://consumer.huawei.com/minisite/HiSuite_en/index.html Once the app is installed, you can unselect start with Windows under settings.
9. Plug in your Honor 8 with the provided USB cable. Give it about 45 seconds to install the driver and recognize it. You may need to go to your phone and tap on "Allow File Access". You will be presented with a question asking if you'd always like to trust the computer you just connected to. Select yes, if this is your primary computer you will be working with.
10. Now download the most up to date ADB drivers. A Google employee has created one link to get that and make it easy. Link here: https://developer.android.com/studio/releases/platform-tools.html
11. Open the zip file you just downloaded and create a folder on your computer easy to get to (I recommend c:\ADB) and paste those files there so they are extracted.
12. Now open the folder up in Windows Explorer if you closed it and hold down the Shift key and RIGHT click in the open area and click "Open command window here"
13. Type adb devices and hit enter. You should see a device ID as a response in the window.
14. Type adb reboot bootloader and hit enter. Give it a couple of seconds and the phone will load the bootloader.
15. Now type fastboot devices and hit enter. You should see your device ID appear again.
16. LAST CHANCE before it wipes everything and unlocks the booloader!!! Type fastboot oem unlock XXXXXXXXXX (where XXXXXXXXXX is the unlock code you received on step 4) and hit enter. It will ask if you're sure. Once this is done, the phone will wipe your data, unlock the phone and reboot. Your Honor 8's bootloader is now unlocked.
B. Flash TWRP (Which version?) This should be a simple flash with fastboot. This is already discussed in another post, but I will put here for reference.
1. Grab a working copy of TWRP for the Honor 8 here: https://forum.xda-developers.com/showpost.php?p=70893767&postcount=408
2. Download TWRP into the same folder you used in step A above (where you're keeping all your files)
2. Navigate in Windows Explorer to this location and hold down the Shift key and RIGHT click in the open area and click "Open command window here"
3. Type adb devices and hit enter. You should see a device ID as a response in the window.
4. Type adb reboot bootloader and hit enter. Give it a couple of seconds and the phone will load the bootloader.
5. Now type fastboot devices and hit enter. You should see your device ID appear again.
6. Type fastboot flash recovery frd-twrp.img and hit enter.
7. Once this is complete, unplug your phone.
8. Hold Volume UP and Power at the same time. Release ONLY the Power button after the blue Honor logo appears.
9. You now are booted into TWRP and it's been successfully flashed.
C. Flash SuperSU (Which version?) This should be a simple flash with TWRP. This is a crazy process because of the encryption on the Data partition. Below is the exact steps I can confirm works from the help of others on here.
1. Boot into TWRP
2. Once there, when asked to keep system read only? - swipe to allow modifications
3. Tap Install
4. Tap Select Storage - Select your SD card
5. Select the supersu file "SuperSU-v2.79-201612051815-EMUI5.0.zip"
6. Swipe to confirm flash
7. Ignore the multiple errors: "Failed to mount '/data' (Invalid argument)
8. Go back to the main menu
9. Select Reboot to Recovery
10. When asked to keep system read only? - swiped to allow modifications (again)
11. Tap Wipe
12. Tap Format Data
13. Type YES then hit enter
14. It will format data using make_ext4fs..
15. When finished, tap Reboot System
16. Reboot back into TWRP
17. Swipe to allow modifications (You can check the box to never show this again)
18. Tap Install
19. Select storage
20. Select your SD card
21. Select the supersu file "SuperSU-v2.79-201612051815-EMUI5.0.zip"
22. Swipe to confirm flash
23. You should see NO ERRORS now when installing SuperSU
24. Wipe cache/dalvik
25. Swipe to wipe
26. Reboot system
Once here, you can download root checker and it will verify you have root access - BUT.. see section D below!
D. What are the current issues with this process? (encryption issues, formatting, unable to access the Data partition, etc)
Some applications like Root Checker will verify that you have root. Other applications will even prompt you (like any of the basic quick reboot apps that easily let you back into recovery) but other major apps like BusyBox and Viper4Audio (when asking to load the driver) will simply fail upon installation. I'm not sure why, since you have R/W access to both the system and the newly unencrypted data partition. I'm really hoping someone can help with this one!
E. How to revert back (and when I say back, I mean ANY working state of Nougat (Android 6.x) or Marshmallow(Android 7.x))
F. How to install extras (Xposed for example, etc)

I know and have done A, B, and C, but as for the rest I'm not too sure about those.

Maybe in the wrong section but thank you.

joesee said:
14. It will format data using make_ext4fs..
Click to expand...
Click to collapse
The Honor 8 defaults file system for /data is F2FS. Do you see any performance changes going back to EXT4? Is it possible to keep F2FS?

joesee said:
15. When finished, tap Reboot System
Click to expand...
Click to collapse
When I wipe then reboot I get stuck in the bootup screen
EDIT； Nevermind I just didn't wait long enough for my phone to boot up

KevinN206 said:
The Honor 8 defaults file system for /data is F2FS. Do you see any performance changes going back to EXT4? Is it possible to keep F2FS?
Click to expand...
Click to collapse
Yes, but twrp read it as ext file, i tested both format f2fs and ext4, i dont feel any different between those 2.
Yes, you can changed the data format to f2fs with twrp but if you reverted back to MM, its requred to changed the data to ext4 format, if not, you'll get bootloop. (dont know if its twrp bugs or not)
Worst scenario, you'll lost all stock recoveries and everything.
I've been there... Lol

faizalotai said:
Yes, but twrp read it as ext file, i tested both format f2fs and ext4, i dont feel any different between those 2.
Yes, you can changed the data format to f2fs with twrp but if you reverted back to MM, its requred to changed the data to ext4 format, if not, you'll get bootloop. (dont know if its twrp bugs or not)
Worst scenario, you'll lost all stock recoveries and everything.
I've been there... Lol
Click to expand...
Click to collapse
Are you saying I can format /data with F2FS to remove the encryption? I am assuming TWRP does not support the encryption yet. Bootlop sux but most important stuffs on my phone is stored on the SD card anyway so it's not too bad to start over.
Maybe it's just me but it seems encryption adds a bit of risks when playing around with rooting. Has there been a scenario where you *can't* recover from bootloop permanently?

KevinN206 said:
Are you saying I can format /data with F2FS to remove the encryption? I am assuming TWRP does not support the encryption yet. Bootlop sux but most important stuffs on my phone is stored on the SD card anyway so it's not too bad to start over.
Maybe it's just me but it seems encryption adds a bit of risks when playing around with rooting. Has there been a scenario where you *can't* recover from bootloop permanently?
Click to expand...
Click to collapse
So far, i've experienced with bootloop and no recoveries available,
As long as you have fastboot mode and bootloader key, you're safe.

faizalotai said:
So far, i've experienced with bootloop and no recoveries available,
As long as you have fastboot mode and bootloader key, you're safe.
Click to expand...
Click to collapse
I am afraid of running into this issue from a fellow xda. The person still doesn't have a solution. https://forum.xda-developers.com/mate-8/help/encrypted-data-mount-t3537645

I'm running into issues with Bluetooth activation, and previously NFC, which i fixed by reflashing the hw_update package, but still no Bluetooth.
I've followed each and every single step on this guide, and BT was working perfectly before.
Any ideas where this may be coming from ?
Still, thanks or the guide

For the SuperSU instructions, you don't have to reformat /data. Yes, TWRP won't be able to access it, but you really only need that for making full system backups. You can access everything in /system/ and then ADB push to /data/ after boot, or fastboot flash an image to /data/ from bootloader. It's not ideal, but it saves you from having to wipe out your configuration.
I'll echo the above poster, as long as you're bootloader unlocked and can issue fastboot commands I'm not sure you're truly bricked. Worst case scenario you ought to be able to flash individual partition images to recover, I unpacked the Nougat update zip to extract the partition images and I've been using those when my tinkering results in a bootloop -- corrupted boot and corrupted recovery I fixed easily.

Hello. Im coming from general topic on Honor 8 rooting but my issue is related to Android MM.
So i had stock EMUI 4.1 (Android 6.0) which i unlocked, flashed TWRP and SuperSU.
Today EMUI 5 (Android 7 ) update came by air so i installed it. After update - no TWPR neither SuperSU.
I enabled Developer options and saw "Enable OEM unlock" switch in OFF state and grayed out (impossible to switch ON).
So now i cannot flash TWPR as fastboot gives error "Command not allowed".
During boot phone says that it is unlocked, FRP lock. Otherwise it boots and works fine but no root.
Any solution possible?
Thank you.

Telperion said:
For the SuperSU instructions, you don't have to reformat /data. Yes, TWRP won't be able to access it, but you really only need that for making full system backups. You can access everything in /system/ and then ADB push to /data/ after boot, or fastboot flash an image to /data/ from bootloader. It's not ideal, but it saves you from having to wipe out your configuration.
I'll echo the above poster, as long as you're bootloader unlocked and can issue fastboot commands I'm not sure you're truly bricked. Worst case scenario you ought to be able to flash individual partition images to recover, I unpacked the Nougat update zip to extract the partition images and I've been using those when my tinkering results in a bootloop -- corrupted boot and corrupted recovery I fixed easily.
Click to expand...
Click to collapse
can u please tell more or make a step by step tutorial on rooting? I'm stuck in rooting, when I format data and boot agai into recovery and flash su It still ends with error 1, dnt know which error it is..

I have FRD-L09 C432B360 Honor 8 (Sweden) with EMUI 5.0, i have TWRP 3.1.0.0, unlocked bootloader
I could not root my phone since it uppdated to nougat (EMUI 5.0)
I tried everything what i could find on the net, but nothing worked yet, any suggestions ?
thanks

Is there any way to do this without rooting?
I recently got my phone and I didn't get the update. I am still running on EMUI 4.1

ajmdrh said:
I have FRD-L09 C432B360 Honor 8 (Sweden) with EMUI 5.0, i have TWRP 3.1.0.0, unlocked bootloader
I could not root my phone since it uppdated to nougat (EMUI 5.0)
I tried everything what i could find on the net, but nothing worked yet, any suggestions ?
thanks
Click to expand...
Click to collapse
Update to latest TWRP and try again

Shehzaan said:
I recently got my phone and I didn't get the update. I am still running on EMUI 4.1
Click to expand...
Click to collapse
Indian version?? Frd-l02?

venugopalu007 said:
Indian version?? Frd-l02?
Click to expand...
Click to collapse
Nope, it is FRD-L09C636B130. I think this is the Middle East version.

Shehzaan said:
Nope, it is FRD-L09C636B130. I think this is the Middle East version.
Click to expand...
Click to collapse
Yes, it is middle east variant

PalakMi said:
Yes, it is middle east variant
Click to expand...
Click to collapse
Do you have any idea how can I get EMUI 5.0 without rooting?

Auto Encryption ROM 47.2.A.10.62

I was trying to apply the installation of the eXistenZ (https://forum.xda-developers.com/xz...om-existenz-pie-v3-5-0-beta-31-01-19-t3895452)
But aside from that I found the following problem:
Following the instructions I downloaded the last ROM, I specifically downloaded the G8141_Customized UK_1308-5320_47.2.A.10.62_R3C
First of all I made a clean flash and restart, then I installed the TWRP v.3.3.1 via ADB, next the Magisk 19.3, later reboot the system normally and finally a tried to do the part of rebooting in the recovery and wiping data, cache, dalvic, etc.
However I noted that when the system started up the first time (after flashing) it appears a legend describing a process of encryption, it said the cel phone was going to be encrypted and it restarted once again.
When I start in the recovery mode and slide the bar to authorize to modify system partition nothing happens.
The first try I stored the Magisk.apk file in the internal memory but in TWRP interface the system partition is not mounted, the storage space says is 0 GM (or mb).
I started up the system one more time, trying to disable the encrypted function but is not possible, I disable Find my Device function as administrator maybe thinking it was the reason deactivating encryption was blocked but nothing.
I have to mention that when I enter recovery mode is not asking me to enter any pass or pin as it does when there is a pin protected phone.
Please can anyone help me to find the solution to this problem

Zur75 said:
I was trying to apply the installation of the eXistenZ (https://forum.xda-developers.com/xz...om-existenz-pie-v3-5-0-beta-31-01-19-t3895452)
But aside from that I found the following problem:
Following the instructions I downloaded the last ROM, I specifically downloaded the G8141_Customized UK_1308-5320_47.2.A.10.62_R3C
First of all I made a clean flash and restart, then I installed the TWRP v.3.3.1 via ADB, next the Magisk 19.3, later reboot the system normally and finally a tried to do the part of rebooting in the recovery and wiping data, cache, dalvic, etc.
However I noted that when the system started up the first time (after flashing) it appears a legend describing a process of encryption, it said the cel phone was going to be encrypted and it restarted once again.
When I start in the recovery mode and slide the bar to authorize to modify system partition nothing happens.
The first try I stored the Magisk.apk file in the internal memory but in TWRP interface the system partition is not mounted, the storage space says is 0 GM (or mb).
I started up the system one more time, trying to disable the encrypted function but is not possible, I disable Find my Device function as administrator maybe thinking it was the reason deactivating encryption was blocked but nothing.
I have to mention that when I enter recovery mode is not asking me to enter any pass or pin as it does when there is a pin protected phone.
Please can anyone help me to find the solution to this problem
Click to expand...
Click to collapse
Wipe cache and data
To factory reset and then boot your system
Turn off / flash twrp/ restart/turn off / enter twrp/ magisk / restart to twrp/flash existenz/ reboot
You will loose all data

Yes i have same problem. When use TWP Swipe but always failed
I try use flashtools, flash .ftf firmware .62 and choose all swipe in box Flashtools.
Now, folder is working.
You can try.

ngocthang26 said:
Yes i have same problem. When use TWP Swipe but always failed
I try use flashtools, flash .ftf firmware .62 and choose all swipe in box Flashtools.
Now, folder is working.
You can try.
Click to expand...
Click to collapse
I'm sorry, didn't understand you, did you fallow the sequence karrouma gave me in the first answer?