HI,
I have 2 Samsung devices with TWRP installed, and I can access the TWRP recovery menu. When I install the flash ROM and try to boot, devices are stuck in system boot forever.
Device 1: SM-T800, with LineageOS 14.1 previously. I opened an email and the device got hacked, so I did a factory reset (which failed), then re-flashed the latest TWRP and recovered rescue mode. Now when I flash the Lineage ROM (from TWRP) the device does not boot to system but keeps showing the splash screen. I think the hack might have placed immutable files under system. could I format this partition to zero it out via ADB? What other choices are there?
<EDITED>
Device 2: Galaxy S3 GT-I9300 - I solved this so i removed this section.
Thank you for any help.
Beeblebrox-BSD said:
HI,
I have 2 Samsung devices with TWRP installed, and I can access the TWRP recovery menu. When I install the flash ROM and try to boot, devices are stuck in system boot forever.
Device 1: SM-T800, with LineageOS 14.1 previously. I opened an email and the device got hacked, so I did a factory reset (which failed), then re-flashed the latest TWRP and recovered rescue mode. Now when I flash the Lineage ROM (from TWRP) the device does not boot to system but keeps showing the splash screen. I think the hack might have placed immutable files under system. could I format this partition to zero it out via ADB? What other choices are there?
Device 2: Galaxy S3 GT-I9300, with working TWRP. This device is giving a "Failed to mount /efs (Invalid argument)" error. The previous setup was shared storage with sdcard and encryption on both internal and sdcard. The sdcard got corrupted, hence the error. This post suggests running
Code:
dd if=/dev/zero of=/dev/block/bootdevice/by-name/modemst1
but the device does not have identifiable boot device under /dev/block. I think this might work if I can identify the boot partition name?
Thank you for any help.
Click to expand...
Click to collapse
Flash a custom ROM for i9300 via TWRP. Download a custom ROM for i9300 and the appropriate Gapps to go with the ROM, store them on external sdcard. When you are in TWRP, before you flash your ROM, select the "Wipe" option, then select "advanced wipes", on the next menu, choose the system partition, data partition, cache partition and dalvik cache partition then swipe the slider to wipe. Then go back to home screen in TWRP and choose the "Install" option, then choose your ROM file and your Gapps file then swipe to flash. When the flash is finished, select the "Reboot system" option and see if it boots into system.
If that doesn't work, we will take some steps further back and try starting from the beginning.
Keep in mind that some of the custom ROMs for i9300 may have a different partition structure and partition sizes than the stock firmware for i9300 has and may require resizing certain partitions such as the system partition by flashing a custom PIT file like the Galaxy S2 had to do before it flashed certain custom ROMs.
Hi, thanks for the input.
* I had already solved the GT-I9300 issue before your post (I should have added to thread rather than edit the original post). I solved issue with that device by including system partition in the wipe.
* For the SM-T800, I used a LineageOS-14.1 that I had stored somewhere. That also did not work, until I only flashed Lineage and did not include any GApps. If I really need it, I can always flash later. I assume the latest GApps 7.1 build conflicts with older ROMs.
An unexpected problem was the lack of current ROMs for the 2 devices. SM-T800 has nothing other than last build Lineage-14-1-20190205. The I9300 has several unofficial ROMs floating around for newer Android versions, but they are all debug/dev builds with enabled options that drain the battery very quickly.
If anyone comes across a decent ROM for either of these devices please LMK. Thanks.
Related
Hi,
I am trying to update to 4.4 from 4.2 on my A700. I used the nightly and gapps files recommended in this thread [NIGHTLY][ROM][4.4] CyanogenMod 11.0 for Acer A700 here: http://forum.xda-developers.com/showthread.php?t=2563610
I booted into CWM Recovery v6.0.4.4 and installed both files. After that, I did a factory reset. I told it to reboot and now all I get is a boot loop of the Acer splash screen showing Bootloader Verion JB-653b3d3 (unlock mode) in the upper left. Then it vibrates once and reboots again. Can someone help me out?
btw, I have previously tried updating to a newer version of 4.2 and I was getting the same thing. At that point, I was able to flash my old files. Now I don't have the old files to flash. Also, I can't find a way to load files via usb. In CWM, it doesn't seem to want to mount so my XP machine can see it.
I am not too well versed in custom roms. I have looked over other threads in this forum but so far I don't see what I need. If my question has already been addressed (I wouldn't be surprised), I need some direction on this. I am stuck...
Thanks very much!
John
frankred said:
Hi,
I am trying to update to 4.4 from 4.2 on my A700. I used the nightly and gapps files recommended in this thread [NIGHTLY][ROM][4.4] CyanogenMod 11.0 for Acer A700 here: http://forum.xda-developers.com/showthread.php?t=2563610
I booted into CWM Recovery v6.0.4.4 and installed both files. After that, I did a factory reset. I told it to reboot and now all I get is a boot loop of the Acer splash screen showing Bootloader Verion JB-653b3d3 (unlock mode) in the upper left. Then it vibrates once and reboots again. Can someone help me out?
btw, I have previously tried updating to a newer version of 4.2 and I was getting the same thing. At that point, I was able to flash my old files. Now I don't have the old files to flash. Also, I can't find a way to load files via usb. In CWM, it doesn't seem to want to mount so my XP machine can see it.
I am not too well versed in custom roms. I have looked over other threads in this forum but so far I don't see what I need. If my question has already been addressed (I wouldn't be surprised), I need some direction on this. I am stuck...
Thanks very much!
John
Click to expand...
Click to collapse
Hey John.
What it sounds like, is that you didn't do your "wipes" before flashing the CM ROM. This is pretty much mandatory, and sounds like what happened.
I would boot back into CWM. These are what you need to wipe/format "before" flashing CWM.
1. Data/factory reset (this wipes your data partition)
2. System (this wipes pretty much all current system files)
3. Cache
4. Dalvak Cache (might need to look for this in "advanced", it depends on the recovery.)
5. Flexrom if it's an option. If not, don't worry about it, as it seldom causes issues.
Then, flash your CM. Now, for myself, I usually flash CM first, boot the system, bypass all the setup screens, then let it stabilize. Then I go back into CWM and flash the Gapps. That's just me though. Some folks flash CM, then Gapps in that order at the same time.
Good luck
MD
Thanks very much for the reply MD!
I tried the steps you suggested but I am still stuck in the same place. Let me explain.
When I select wipe data/factory reset, it processes for a second and then reboots. Is this normal behavior?
When I select Wipe Dalvik Cache, I get:
E:Unknown volume for path [/sd-ext]
Dalvik cache wiped.
I selected Show Log:
Block groups: 10
Reserved block group size: 79
Created filesystem with 11/78400 inodes and 10305/313344 blocks.
warning:wipe_block_device: wipe via secure discard suppressed due to bug in EMMC firmware
Cache wipe complete.
I:Ca't partition non mmcblk device: /decisces/platform/sdhci-tegra.0/mmc_host/mmc2
E:unknown volume for path [/sd-ext]
rm: can't remove '/data/dalvik-cache': no such file or directory
rm: can't remove '/cache/dalvik-cache': no such file or directory
rm: can't remove '/sd-ext/dalvik-cache': no such file or directory
Dalvik Cache wiped.I have my rom and gapps in /storage/sdcard1/cminstall/
cm-11-2014-111-NIGHTLY-a700.zip - not renamed cmupdate.zip
gapps-kk-20131209.zip
I feel like I have a larger issue here...
Well, it has been a while but I am still stuck in the same boat. I have since had the flu and I was out of town for work for 3 days then 5 days.
My rom and gapps files are currently on my external SD card. Should they be on the internal storage?
I have been trying to connect via usb to my xp laptop but I am not having any luck. The best I can get is an A700 in Device Manager with a yellow exclamation point. I have tried installing the Acer usb drivers but they won't take.
The closest I get to Windows finding the tablet with my laptop is when I let it attempt to boot. Windows finds the device for about 5 seconds before it reboots again.
Can anyone point me in the right direction?
Any help would be much appreciated.
John
Hello everyone,
I have a LG Nexus 5 and I want to install Lineage OS.
I was successfully (official) TWRP and (official) Lineage OS with GAPPs installed and used and many times OTA updated in past.
Few days ago I want wipe all old datas and fresh install Lineage OS and first download latest versions of (official) TWRP and (official) Lineage OS 14.1.
I downloaded TWRP via https://eu.dl.twrp.me/hammerhead/ and Lineage OS via https://web.archive.org/web/20190223223750/https://download.lineageos.org/hammerhead
I verified hashes before use this files.
Second I pressed "Volume Down + Power" buttons but old (version) TWRP not started. Nexus 5's screen look like factory image. After this "adb reboot bootloader", "fastboot devices", "fastboot flash recovery twrp-3.3.1-0-hammerhead.img".
I powered off Nexus 5 and press "Volume Down + Power" buttons but Nexus 5's screen look like factory image even move down by using Volume Down button and selected "Recovery mode" after press power button latest TWRP started. (I don't know is this normal? Old time I pressed "Volume Down + Power" buttons, directly TWRP started.)
Third I selected "Wipe", "Format Data", "Advanced Wipe", choosed "Cache and System" and they are wiped.
Fourth I backed to main page and selected “Advanced”, “ADB Sideload” and swiped. On my computer "adb sideload lineage-14.1-20190126-nightly-hammerhead-signed.zip". Process succesfully completed. But I navigated to "Install" via main page I didn't see "lineage-14.1-20190126-nightly-hammerhead-signed.zip". My "sdcard" directory look like only within TWRP directory. Even so I turned main page and selected "Reboot", "System" swiped and after reboot Lineage OS 14.1 normally started and I was succesfully set up it.
Fifth I just wondered Lineage OS 16 on Nexus 5 and I downloaded in here (unofficial) LineageOS 16 for Nexus 5.
https://forum.xda-developers.com/google-nexus-5/orig-development/rom-lineageos-16-0-nexus-5-t3921162
And verified hash for 20190719. (It was latest version in time I downloaded.)
Sixth start TWRP and wipe necessary locations. (Format Data, System, Cache)
Go to ADB Sideload and (on computer) "adb sideload lineage-16.0-20190719-UNOFFİCİAL-hammerhead.zip"
Terminal printed (only): "Total xfer: 0.01x"
---------------------------TWRP Screen Start--------------------------
Updating partition details...
...done
Full SELinux support is present.
MTP Enabled
Formatting Data using make_ext4fs...
You may need to reboot recovery to be able to use /
data again.
Updating partition details...
...done
Formatting System using make_ext4fs...
Formatting Cache using make_ext4fs...
Updating partition details...
...done
Starting ADB sideload feature...
Installing zip file '/sideload/package.zip'
Warning: No file_contexts
Target: google/hammerhead/hammerhead:6.0.1/M4B30Z/
3437181:user/release-keys
detected filesystem ext4 for /dev/block/bootdevice/
by-name/system
Patching system image unconditionally...
E1001: Failed to update system image.
Updater process ended with ERROR: 7
---------------------------TWRP Screen End---------------------------
Seventh I want reflash (official) Lineage OS 14.1 because of Lineage OS 16 flash failed and I wiped old installed Lineage OS 14.1 but ADB Sideload again same error. (This file before successfully transferred and installed.)
Eight I downloaded factory image (6.0.1 (M4B30Z, Dec 2016)) for Nexus 5. in here https://developers.google.com/android/images#hammerhead
It was completely installed without any error and started. I set up it. (I don't lock bootloader.)
I used "flash-all.sh".
Nineth I re-installed TWRP and retry same installation. Again fail with same error.
I tried some solutions for solve this problem but they aren't solve my problem.
1) Install different versions of TWRP. (3.3.1-0, 3.3.0-0, 3.2.1-1)
2) Delete "assert line" in "updater-script" explained this video https://www.youtube.com/watch?v=VCqROwIGLLE
3) Lineage OS file transfere to external USB drive and connect the Nexus 5 via USB OTG cable. (Error or not detect USB drive for different results depend versions of TWRP.)
4) Repair "data" partition. (Ext4 file system.)
How to solve this problem and install Lineage OS?
Note: I am using Manjaro. https://manjaro.org/
I am not a native english speaker. Sorry for my wrongs.
The official Lineage 14.1 with the unofficial Lineage 14.1, 16.0 have differences with their keys, the unofficial is not signed with lineage private key.
You may see the razoloves' post #2994
and cvxda post #2
sant514 said:
The official Lineage 14.1 with the unofficial Lineage 14.1, 16.0 have differences with their keys, the unofficial is not signed with lineage private key.
You may see the razoloves' post #2994
and cvxda post #2
Click to expand...
Click to collapse
Hello,
I know their keys different but I try clean install. I wiped System, Cache, Dalvik / ART Cache and Format Data.
I can't transfer any zip file via ADB Sideload. I always face same problem on TWRP.
"E1001: Failed to update system image.
Updater process ended with ERROR: 7"
I installed succesfully official Lineage OS with same method in past but now I can't transfer/install same old official or different unofficial any zip file.
What I don't understand is Google's factory image transferring and installing without any problem.
I am not a native english speaker. Sorry for my wrongs.
earthling2019 said:
Hello,
I know their keys different but I try clean install. I wiped System, Cache, Dalvik / ART Cache and Format Data.
I can't transfer any zip file via ADB Sideload. I always face same problem on TWRP.
"E1001: Failed to update system image.
Updater process ended with ERROR: 7"
I installed succesfully official Lineage OS with same method in past but now I can't transfer/install same old official or different unofficial any zip file.
What I don't understand is Google's factory image transferring and installing without any problem.
I am not a native english speaker. Sorry for my wrongs.
Click to expand...
Click to collapse
You get this error in TWRP during installation of unofficial LOS16 because from 20190719 build and beyond you have to do repartition procedure in order to increase system partition.
Just look here https://forum.xda-developers.com/showpost.php?p=79928889&postcount=190
If you've never done repartition before you're good to go with post i've provided.
Otherwise you have to return stock partition layout.You have to look at the following post in order to do this procedure https://forum.xda-developers.com/go...ment/repartition-nexus-5-repartition-t3844395
Actually i don't know your current O.S. Manjaro,but if you follow carefully these posts you'll be able to flash and enjoy LOS16 perfectly.
srepole said:
You get this error in TWRP during installation of unofficial LOS16 because from 20190719 build and beyond you have to do repartition procedure in order to increase system partition.
Just look here https://forum.xda-developers.com/showpost.php?p=79928889&postcount=190
If you've never done repartition before you're good to go with post i've provided.
Otherwise you have to return stock partition layout.You have to look at the following post in order to do this procedure https://forum.xda-developers.com/go...ment/repartition-nexus-5-repartition-t3844395
Actually i don't know your current O.S. Manjaro,but if you follow carefully these posts you'll be able to flash and enjoy LOS16 perfectly.
Click to expand...
Click to collapse
Hello,
When I started this topic, can't transfer any official or unofficial Lineage OS zip file. (Include official/unofficial 14.1)
I found a solution for this problem few days ago and succesfully installed unofficial Lineage OS 16 and then 14.1. (I used before July 19 Lineage OS 16 build for not to require repartitioning.)
DISCLAIMER:
I am NOT responsible for any damage. This solution at your own risk.
I found this solution:
DISCLAIMER:
I am NOT responsible for any damage. This solution at your own risk.
You make sure battery charged.
1st start TWRP and go to "Wipe", "Format Data", "yes"
2nd go to "Advanced Wipe", select "Dalvik /ART Cache, System, Data, Internal Storage, Cache" and "Swipe to Wipe"
3rd go to TWRP home screen "Reboot", "Power Off"
Wait for 10 minutes.
4th start TWRP and go to "Advanced", "ADB Sideload", "Swipe to Start Sideload", transfer Lineage OS zip to smart phone from computer.
DISCLAIMER:
I am NOT responsible for any damage. This solution at your own risk.
I am not a native english speaker. Sorry for my wrongs.
I'm trying to install the OpenGapps package for LineageOS 16 on my new Oneplus 7 Pro, but have a problem installing it.
First I tried the "open_gapps-arm64-9.0-micro-20190827.zip" package, but it told me its the wrong platform. Is it not arm64?
Second I tried to install the "open_gapps-arm-9.0-micro-20190827.zip", but gives me an error 70, saying I do not have enough space.
Maybe someone have a solution for this?
Thanks
Try MindtheGapps. I've seen this work for some.
http://downloads.codefi.re/jdcteam/javelinanddart/gapps
oryanh said:
Try MindtheGapps. I've seen this work for some.
http://downloads.codefi.re/jdcteam/javelinanddart/gapps
Click to expand...
Click to collapse
Tried it. Still does not work.
I got it semi, but still not working. Seems like the problem is within the way the partitions getting handled. My old Oneplus 5t had a boot, recovery, system partitions. The new one includes the recovery inside the boot it seems instead.
Here's how far I am now:
1) Unlocked the phone
2) Installed TWRP
3) Install Lineage ( This overwrites the TWRP so you have to install it again )
4) Reboot straight from TWRP after flashing the Lineage... back into the Bootloader/Fastboot mode and install the TWRP again.
5) Boot back into TWRP recovery and now I'm able to install OpenGapps ARM64 version.
But after this I cant boot the OS anymore...
cbadk said:
Tried it. Still does not work.
I got it semi, but still not working. Seems like the problem is within the way the partitions getting handled. My old Oneplus 5t had a boot, recovery, system partitions. The new one includes the recovery inside the boot it seems instead.
Here's how far I am now:
1) Unlocked the phone
2) Installed TWRP
3) Install Lineage ( This overwrites the TWRP so you have to install it again )
4) Reboot straight from TWRP after flashing the Lineage... back into the Bootloader/Fastboot mode and install the TWRP again.
5) Boot back into TWRP recovery and now I'm able to install OpenGapps ARM64 version.
But after this I cant boot the OS anymore...
Click to expand...
Click to collapse
Format data in twrp then try boot again should work
liam_davenport said:
Format data in twrp then try boot again should work
Click to expand...
Click to collapse
Still no luck. Tried many things now... but here's what happens:
1) Installing the TWRP
2) Format data partition and everything else
3) Reboot back into TWRP
4) Install Lineage ( At this point I'm able to boot into Lineage just fine )
5) Trying to install Open GApps at this point gives me:
Code:
# Begin Open GApps Install Log
------------------------------------------------------------------
------------------------------------------------------------------
# End Open GApps Install Log
INSTALLATION FAILURE: This Open GApps package cannot be installed on this
device's architecture. Please download the correct version for your device.
# Begin User's gapps-config
# End User's gapps-config
It says I need to install the ARM instead of ARM64...
But if I go back into the bootloader and flash the twrp and boot back into the recovery, I'm able to install Open GApps ARM64 just fine. Seems like a weird "device's architecture" detection problem in the Open Gapps or maybe it could be the TWRP... not sure...
Also after this it will no longer boot.
Kinda weird problem....
cbadk said:
Still no luck. Tried many things now... but here's what happens:
1) Installing the TWRP
2) Format data partition and everything else
3) Reboot back into TWRP
4) Install Lineage ( At this point I'm able to boot into Lineage just fine )
5) Trying to install Open GApps at this point gives me:
Code:
# Begin Open GApps Install Log
------------------------------------------------------------------
------------------------------------------------------------------
# End Open GApps Install Log
INSTALLATION FAILURE: This Open GApps package cannot be installed on this
device's architecture. Please download the correct version for your device.
# Begin User's gapps-config
# End User's gapps-config
It says I need to install the ARM instead of ARM64...
But if I go back into the bootloader and flash the twrp and boot back into the recovery, I'm able to install Open GApps ARM64 just fine. Seems like a weird "device's architecture" detection problem in the Open Gapps or maybe it could be the TWRP... not sure...
Also after this it will no longer boot.
Kinda weird problem....
Click to expand...
Click to collapse
Don't wipe system afaik vendor LOS generates it's own, Also might be in the wrong slot make sure the slot changed when rebooting back to recovery to install gapps, I used MindTheGapps latest version from OP worked great.
liam_davenport said:
Don't wipe system afaik vendor LOS generates it's own, Also might be in the wrong slot make sure the slot changed when rebooting back to recovery to install gapps, I used MindTheGapps latest version from OP worked great.
Click to expand...
Click to collapse
Have not wiped the System and Vendor partition after I installed Lineage... It boots just fine... just not if I install Open GApps....
Tried MindTheGapps latest version, but still no luck.
Okay got it working. The problem was the A/B partition layout they have in this phone... Was not aware of this.
This article describes it pretty well: https://lineageos.org/Changelog-19/
So yeah this is what I did:
1) Boot into Bootloader/Fastboot mode
2) Flash the boot partition with fastboot flash boot twrp-3.3.1-52-guacamole-unified.img
3) Restart into TWRP - Format the data partition and clean the system partition etc.
3) Restart into recovery TWRP once more to get the data partition ready
4) Now you can transfer the lineage-16.0-20190827-nightly-guacamole-signed.zip over to memory.
5) Now flash the zip file and let it complete. This will overwrite the boot partition with TWRP and replace it with Lineage's own boot/recovery image.
6) Now reboot into Lineage's recovery. Now select Apply update > Apply from ADB and send the "MindTheGapps-9.0.0-arm64-20190615_031441.zip" file to the phone with "adb sideload MindTheGapps-9.0.0-arm64-20190615_031441.zip" - You might have to confirm the zip file....
After this is done, the phone should be ready for use.
cbadk said:
Okay got it working. The problem was the A/B partition layout they have in this phone... Was not aware of this.
This article describes it pretty well: https://lineageos.org/Changelog-19/
So yeah this is what I did:
1) Boot into Bootloader/Fastboot mode
2) Flash the boot partition with fastboot flash boot twrp-3.3.1-52-guacamole-unified.img
3) Restart into TWRP - Format the data partition and clean the system partition etc.
3) Restart into recovery TWRP once more to get the data partition ready
4) Now you can transfer the lineage-16.0-20190827-nightly-guacamole-signed.zip over to memory.
5) Now flash the zip file and let it complete. This will overwrite the boot partition with TWRP and replace it with Lineage's own boot/recovery image.
6) Now reboot into Lineage's recovery. Now select Apply update > Apply from ADB and send the "MindTheGapps-9.0.0-arm64-20190615_031441.zip" file to the phone with "adb sideload MindTheGapps-9.0.0-arm64-20190615_031441.zip" - You might have to confirm the zip file....
After this is done, the phone should be ready for use.
Click to expand...
Click to collapse
I am facing the same A/B slot problem with my Moto Z2.
After setp 5), did you let the lineage OS fist then reboot into recovery, or did you go straight to the lineage recovery?
Thank you so much for this. I finally fot it sorted. I did find that sometimes you have to ubplug the USB cable and plug it in again to be recognised, but I got it going. Goodby Google!!!!
I am using Gentoo Linux with adb to do this.
I would like to install TWRP and after that Lineage OS on my Samsung S8+ (Exynos). So i tried flashing TWRP with Odin (Dream2lte version 3.3.1.0). But i ran into a FRP lock so i googled and try to solve this, but so far i am unable to.
I have the password to my Google account, so i removed the Google account from the phone and removed the phone from my Google account. After factory reset i am still getting an error FRP lock when flashing.
Shouldn't the FRP lock be gone after removing google account and doing a factory reset? I have tried a couple of YT Howto's but they don't seem to work.
How do i remove the FRP lock so that i am able to install TWRP and Lineage OS?
Like i said i know the password to my Google account and i 100% own the phone
(Bypass probably isn't the correct word, i am simply trying to turn it off )
Got exactly the same problem, hence like you, ended up here for help.
Well i fixed my problem (Disable USB debug and OEM unlock, couple of reboots and enabled them and it worked). But after that i broke my phone
I am stuck at the screen saying: An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software.
I know this is meant to scare me (is kinda working...), but i also know that Odin is still working. So as far as i know i have to flash the original firmware now to fix this. But i keep getting the error: Invalid magic string. When i try to also flash a BL file i get the error: ""Secure CHECK FAIL: (BOOTLOADER)" The option Re-Partition in Odin is switched OFF, as far as i know this is okee... right?
I have tried 3 different versions (Android 9/8/7):
https://www.sammobile.com/samsung/galaxy-s8/firmware/SM-G950F/TNL/download/G950FXXU1AQC9/128974/
https://www.sammobile.com/samsung/galaxy-s8/firmware/SM-G950F/TNL/download/G950FXXU4DSBA/259612/
https://www.sammobile.com/samsung/galaxy-s8/firmware/SM-G950F/TNL/download/G950FXXS4CSA4/256485/
This zip files contain a BL/AP/CP/CSC file, i have tried them all at the same time in Odin as well as the AP and BL files seperate. (from one zip file, NOT different version files together of course)
I tried using Smart Switch 4.1 to do the emergency procedure using model nummer SM-G955F with my serial number but before it does anything it tells me this is not possible with an SM-G955F.
They all give me the same result.
Does anybody know how to fix this?
TheGeneral said:
Well i fixed my problem (Disable USB debug and OEM unlock, couple of reboots and enabled them and it worked). But after that i broke my phone
I am stuck at the screen saying: An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software.
I know this is meant to scare me (is kinda working...), but i also know that Odin is still working. So as far as i know i have to flash the original firmware now to fix this. But i keep getting the error: Invalid magic string. When i try to also flash a BL file i get the error: ""Secure CHECK FAIL: (BOOTLOADER)" The option Re-Partition in Odin is switched OFF, as far as i know this is okee... right?
I have tried 3 different versions (Android 9/8/7):
https://www.sammobile.com/samsung/galaxy-s8/firmware/SM-G950F/TNL/download/G950FXXU1AQC9/128974/
https://www.sammobile.com/samsung/galaxy-s8/firmware/SM-G950F/TNL/download/G950FXXU4DSBA/259612/
https://www.sammobile.com/samsung/galaxy-s8/firmware/SM-G950F/TNL/download/G950FXXS4CSA4/256485/
This zip files contain a BL/AP/CP/CSC file, i have tried them all at the same time in Odin as well as the AP and BL files seperate. (from one zip file, NOT different version files together of course)
I tried using Smart Switch 4.1 to do the emergency procedure using model nummer SM-G955F with my serial number but before it does anything it tells me this is not possible with an SM-G955F.
They all give me the same result.
Does anybody know how to fix this?
Click to expand...
Click to collapse
Secure check fail on bootloader is your flashing a older firmware than on the device. Look at the builds 5th from last digit. You need to flash that equal or greater than.
The error screen you see for emergency recovery is ok. It's like a modified version of download mode. Kind of. You can still flash Odin files from said screen. Ii see you've flashed a bit 1. And two bit 4 firmwares. So you must be on a 5 or greater. I don't know the exy bit number but like snapdragon is at or near 7 or 8. I can explain better if you need. But not an exynos expert
TheMadScientist said:
Secure check fail on bootloader is your flashing a older firmware than on the device. Look at the builds 5th from last digit. You need to flash that equal or greater than.
The error screen you see for emergency recovery is ok. It's like a modified version of download mode. Kind of. You can still flash Odin files from said screen. Ii see you've flashed a bit 1. And two bit 4 firmwares. So you must be on a 5 or greater. I don't know the exy bit number but like snapdragon is at or near 7 or 8. I can explain better if you need. But not an exynos expert
Click to expand...
Click to collapse
Thanks for your reply! I am in the normal "Downloading...." screen is there anywhere i can check which number i am at?
But i have just tried this one: G950FXXS7DTA6_G950FOXM7DTA6_PHN and it is not working. But this is the newest one available on sammobile. Still the same bootloader error.
I have tried TWRP 3.3.1.0 and that worked, now i am in the TWRP menu but i don't have the LineageOS 17 + GoApps copied to the root. So i cannot install LineageOS now. What do i do now? My computer sees a SM-G955F but it is not showing any storage, if i can fix this i could copy the LineageOS files to the root...right?
TheGeneral said:
Thanks for your reply! I am in the normal "Downloading...." screen is there anywhere i can check which number i am at?
But i have just tried this one: G950FXXS7DTA6_G950FOXM7DTA6_PHN and it is not working. But this is the newest one available on sammobile. Still the same bootloader error.
I have tried TWRP 3.3.1.0 and that worked, now i am in the TWRP menu but i don't have the LineageOS 17 + GoApps copied to the root. So i cannot install LineageOS now. What do i do now? My computer sees a SM-G955F but it is not showing any storage, if i can fix this i could copy the LineageOS files to the root...right?
Click to expand...
Click to collapse
1. If you are on an S8+ flashing firmware for the S8 will cause you issues. Download firmware for the S8+ only. ie: 955f not 950f.
2. If you can't get into the system but can get into download mode there should be a line saying
AP SWREV: B:? K:? S:?
The B:? Is your bootloader version number. You will need to flash the same or higher.
3. How did you install TWRP?
If you don't have an SD card to store files on then after the Format Data stage you can then copy files from pc to phones internal storage.
spawnlives said:
1. If you are on an S8+ flashing firmware for the S8 will cause you issues. Download firmware for the S8+ only. ie: 955f not 950f.
2. If you can't get into the system but can get into download mode there should be a line saying
AP SWREV: B:? K:? S:?
The B:? Is your bootloader version number. You will need to flash the same or higher.
3. How did you install TWTP?
If you don't have an SD card to store files on then after the Format Data stage you can then copy files from pc to phones internal storage.
Click to expand...
Click to collapse
I am a bit embarrassed, it looks like i have been trying to flash the wrong ROMs last night 950 instead of 955, i am downloading the correct files now and wil try again. Sorry for this dumb mistake!
Just to be sure, i am trying to do this:
https://www.getdroidtips.com/lineage-os-17-samsung-galaxy-s8/
(I do know that this site says S8, but i picked the right files this time and thought the process would be the same)
But i first Flash TWRP with Odin, otherwise i cannot reach the TWRP recovery menu right?
But when i look bullet 5 (not number 5) it looks like i need to flash TWRP from within the TWRP menu. But that is not correct right?
I have placed these zip files on the phone:
lineage-17.1-20200211-UNOFFICIAL-dreamlte.zip
open_gapps-arm64-10.0-pico-20200303.zip
As a zip and unpacked, but when i am in the TWRP menu and i go to install, i cannot find the zip files. I placed them in the highest folder level possible. Why can't i find them now?
TheGeneral said:
I am a bit embarrassed, it looks like i have been trying to flash the wrong ROMs last night 950 instead of 955, i am downloading the correct files now and wil try again. Sorry for this dumb mistake!
Just to be sure, i am trying to do this:
https://www.getdroidtips.com/lineage-os-17-samsung-galaxy-s8/
(I do know that this site says S8, but i picked the right files this time and thought the process would be the same)
But i first Flash TWRP with Odin, otherwise i cannot reach the TWRP recovery menu right?
But when i look bullet 5 (not number 5) it looks like i need to flash TWRP from within the TWRP menu. But that is not correct right?
I have placed these zip files on the phone:
lineage-17.1-20200211-UNOFFICIAL-dreamlte.zip
open_gapps-arm64-10.0-pico-20200303.zip
As a zip and unpacked, but when i am in the TWRP menu and i go to install, i cannot find the zip files. I placed them in the highest folder level possible. Why can't i find them now?
Click to expand...
Click to collapse
I don't use custom roms yet.
Try searching for you device S8+ for installation instructions. Had a quick look the firmware is for S8 only not S8+. Need dream2lit for S8+
Try in separate stages instead of all at once.
I would sort out your stock firmware first get it up and running.
Then install TWRP. Install for S8+ from
http://twrp.me/Devices/Samsung/
They are many guides for this
https://forum.xda-developers.com/ga...pment/recovery-twrp-galaxy-s8-exynos-t3595102
If you need rmm bypass zip
https://forum.xda-developers.com/sa...w-to/guide-root-install-twrp-samsung-t3747535
Get that up and running properly.
Then you can install custom roms,root etc.
In regards to transferring files to phone they need to be a zip file ( .zip ) or an image ( .img ) files to flash in TWRP.
Maybe select internal storage then from menu select sdcard folder check if file is there.
spawnlives said:
I don't use custom roms yet.
Try searching for you device S8+ for installation instructions. Had a quick look the firmware is for S8 only not S8+. Need dream2lit for S8+
Try in separate stages instead of all at once.
I would sort out your stock firmware first get it up and running.
Then install TWRP. Install for S8+ from
http://twrp.me/Devices/Samsung/
They are many guides for this
https://forum.xda-developers.com/ga...pment/recovery-twrp-galaxy-s8-exynos-t3595102
If you need rmm bypass zip
https://forum.xda-developers.com/sa...w-to/guide-root-install-twrp-samsung-t3747535
Get that up and running properly.
Then you can install custom roms,root etc.
In regards to transferring files to phone they need to be a zip file ( .zip ) or an image ( .img ) files to flash in TWRP.
Maybe select internal storage then from menu select sdcard folder check if file is there.
Click to expand...
Click to collapse
I am using dream2lit.
I have the correct factory stock ROM (now), so i can always go back now. But i agree, my preparation wasn't good enough.
I will look at the links, but for now like i said my problem is that i cannot see my files in TWRP. But maybe that will be addressed in one of your links
With regards to your first link, i used the "Odin Method" so as far as i can tell i did this the right way(https://twrp.me/samsung/samsunggalaxys8plus.html):
Odin Install Method (No Root Required):
You will need to download and install Odin on your PC. Once you have Odin installed, download the proper .tar file for your device from the download link above. Power off your device. Turn on your device using the proper key combo to get into download mode and attach the device to your computer via a USB cable. Use the PDA tab or button to browse to and select the tar file that you downloaded and flash the device.
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
TheGeneral said:
I am using dream2lit.
I have the correct factory stock ROM (now), so i can always go back now. But i agree, my preparation wasn't good enough.
I will look at the links, but for now like i said my problem is that i cannot see my files in TWRP. But maybe that will be addressed in one of your links
With regards to your first link, i used the "Odin Method" so as far as i can tell i did this the right way(https://twrp.me/samsung/samsunggalaxys8plus.html):
Odin Install Method (No Root Required):
You will need to download and install Odin on your PC. Once you have Odin installed, download the proper .tar file for your device from the download link above. Power off your device. Turn on your device using the proper key combo to get into download mode and attach the device to your computer via a USB cable. Use the PDA tab or button to browse to and select the tar file that you downloaded and flash the device.
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
Click to expand...
Click to collapse
Note: Samsung don't have fastboot commands. Have to use button configurations to enter recovery or download modes.
What stage are you at?
It will give me a better idea to be able to help more.
spawnlives said:
Note: Samsung don't have fastboot commands. Have to use button configurations to enter recovery or download modes.
What stage are you at?
It will give me a better idea to be able to help more.
Click to expand...
Click to collapse
Well i installed Lineage OS 17.1 and Open Apps (lineage-17.1-20200211-UNOFFICIAL-dream2lte and open_gapps-arm64-10.0-pico-20200303) with an OTG plug and an USB stick. After installing i removed the USB Stick. But now i am having a new problem...
When the phone boots it asks: "To start Android, enter your password"
Which password is this? When i enter a password i often use it works but then:
"Decryption unsuccessful
The password you entered is correct, but unfortunately your data is corrupt. (Which is no problem)
To resume using your phone, you need to perform a factory reset. When you set up your phone after the reset, you'll have an opportunity to restore any data that was backed up to your Google account.
(Button) Erase ALL DATA"
Of course i erase the data. Look at the attachment to see what happens then.
I will not give up, will get Lineage OS on this phone, and after that on my Tablet S2 and maybe even on my primairy phone (S10+)
What should i do now? Many thanks for all the help so far, and for help finishing this proces
TheGeneral said:
Well i installed Lineage OS 17.1 and Open Apps (lineage-17.1-20200211-UNOFFICIAL-dream2lte and open_gapps-arm64-10.0-pico-20200303) with an OTG plug and an USB stick. After installing i removed the USB Stick. But now i am having a new problem...
When the phone boots it asks: "To start Android, enter your password"
Which password is this? When i enter a password i often use it works but then:
"Decryption unsuccessful
The password you entered is correct, but unfortunately your data is corrupt. (Which is no problem)
To resume using your phone, you need to perform a factory reset. When you set up your phone after the reset, you'll have an opportunity to restore any data that was backed up to your Google account.
(Button) Erase ALL DATA"
Of course i erase the data. Look at the attachment to see what happens then.
I will not give up, will get Lineage OS on this phone, and after that on my Tablet S2 and maybe even on my primairy phone (S10+)
What should i do now? Many thanks for all the help so far, and for help finishing this proces
Click to expand...
Click to collapse
Mounting data errors in twrp generally ( but not always ) means your device is encrypted/re-encrypted when booting into system. Twrp has issues with encrypted devices.
What version twrp are you using?
Have you flashed the no-verity-opt-encypt zip in twrp. This zip file will prevent device from re-encrypting when booting phone back into the system ( after the Format Data stage / reboot back into twrp)
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
What is your process of installing twrp?
If you have any passwords etc. installed delete them until after setting up you phone.
spawnlives said:
Mounting data errors in twrp generally ( but not always ) means your device is encrypted/re-encrypted when booting into system. Twrp has issues with encrypted devices.
What version twrp are you using?
Have you flashed the no-verity-opt-encypt zip in twrp. This zip file will prevent device from re-encrypting when booting phone back into the system ( after the Format Data stage / reboot back into twrp)
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
What is your process of installing twrp?
If you have any passwords etc. installed delete them until after setting up you phone.
Click to expand...
Click to collapse
I am using version twrp-3.3.1-1-dream2lte and no i have not flashed that no-verity-opt-encypt zip. I assume i should flash this one the same way flash the Lineage ROM right?
No passwords used on the phone.
My process:
i put the phone in download mode (POWER+BIXBY+VOL DOWN)
I use ODIN to flash twrp-3.3.1-1-dream2lte, and when the phone reboot i press POWER+BIXBY+VOL UP to enter TWRP menu,
Then i go to WIPE and Advanced Wipe and i select the data, system and davlik cache. Then swipe to wipe it.
Then i go to INSTALL and flash lineage-17.1-20200211-UNOFFICIAL-dream2lte and open_gapps-arm64-10.0-pico-20200303
TheGeneral said:
I am using version twrp-3.3.1-1-dream2lte and no i have not flashed that no-verity-opt-encypt zip. I assume i should flash this one the same way flash the Lineage ROM right?
No passwords used on the phone.
My process:
i put the phone in download mode (POWER+BIXBY+VOL DOWN)
I use ODIN to flash twrp-3.3.1-1-dream2lte, and when the phone reboot i press POWER+BIXBY+VOL UP to enter TWRP menu,
Then i go to WIPE and Advanced Wipe and i select the data, system and davlik cache. Then swipe to wipe it.
Then i go to INSTALL and flash lineage-17.1-20200211-UNOFFICIAL-dream2lte and open_gapps-arm64-10.0-pico-20200303
Click to expand...
Click to collapse
To install TWRP
1. Flash twrp with odin - reboot straight into twrp
2. In wipe menu select Format Data ( bottom right )
Type yes to format
3. Reboot back into twrp ( use twrp menu )
4. Flash no-verity-opt zip and if needed rmm bypass zip ( using install button in twrp ).
5. Reboot back into twrp then reboot to system using twrp menu.
6. From system reboot back into twrp.
To check if device is un-encrypted use backup menu - check data storage size ( If reading 0mb then device is still encrypted ).
Note: If all ok I would do a complete twrp backup at this stage ( keep backup on a separate storage device ).
Then you can install custom Rom's as per the installation guide of that Rom.
spawnlives said:
To install TWRP
1. Flash twrp with odin - reboot straight into twrp
2. In wipe menu select Format Data ( bottom right )
Type yes to format
3. Reboot back into twrp ( use twrp menu )
4. Flash no-verity-opt zip and if needed rmm bypass zip ( using install button in twrp ).
5. Reboot back into twrp then reboot to system using twrp menu.
6. From system reboot back into twrp.
To check if device is un-encrypted use backup menu - check data storage size ( If reading 0mb then device is still encrypted ).
Note: If all ok I would do a complete twrp backup at this stage ( keep backup on a separate storage device ).
Then you can install custom Rom's as per the installation guide of that Rom.
Click to expand...
Click to collapse
how do i make a complete TWRP backup? and what is rmm bypass and how do i know if it is neccessary to install this zip file?
TheGeneral said:
how do i make a complete TWRP backup? and what is rmm bypass and how do i know if it is neccessary to install this zip file?
Click to expand...
Click to collapse
In twrp main menu
Select backup menu - select ( all ) partitions - select storage location ( bottom left of screen ) - then swipe to backup.
Note:
1. If backing up to internal storage copy/move backup to an external storage ie: PC, sd card.etc.
2. Since you want a custom rom backup of the EFS partition is important.
Rmm state can be found in download mode. It will have a line ( near the top ) saying RMM state. It will either say prenormal or normal /disappeared.
It won't hurt to flash it just in case.
See OP in the thread I sent before:
https://forum.xda-developers.com/sa...w-to/guide-root-install-twrp-samsung-t3747535
spawnlives said:
To install TWRP
1. Flash twrp with odin - reboot straight into twrp
2. In wipe menu select Format Data ( bottom right )
Type yes to format
3. Reboot back into twrp ( use twrp menu )
4. Flash no-verity-opt zip and if needed rmm bypass zip ( using install button in twrp ).
5. Reboot back into twrp then reboot to system using twrp menu.
6. From system reboot back into twrp.
To check if device is un-encrypted use backup menu - check data storage size ( If reading 0mb then device is still encrypted ).
Note: If all ok I would do a complete twrp backup at this stage ( keep backup on a separate storage device ).
Then you can install custom Rom's as per the installation guide of that Rom.
Click to expand...
Click to collapse
I am really trying to do what you are saying...but when i try to "Format Data" (Step 2) it shows an error "Failed to mount '/preload' (Invalid argument). When i try to install no-verity-opt zip (step 4) at the end it shows the same error "Failed to mount '/preload' (Invalid argument). Which is probably because format data failed?
I am installing the zip from an USB stick with an USB-C to USB-A Converter. I don't think that could be the problem?
As Expected the "Data (excl. storage) is still showing 0MB.
TheGeneral said:
I am really trying to do what you are saying...but when i try to "Format Data" (Step 2) it shows an error "Failed to mount '/preload' (Invalid argument). When i try to install no-verity-opt zip (step 4) at the end it shows the same error "Failed to mount '/preload' (Invalid argument). Which is probably because format data failed?
I am installing the zip from an USB stick with an USB-C to USB-A Converter. I don't think that could be the problem?
As Expected the "Data (excl. storage) is still showing 0MB.
Click to expand...
Click to collapse
Failed to mount preload seems to affect some users.
You could try after the format data and reboot back into twrp ( using twrp 3.3.1.1 ):
Select wipe menu
Select advanced wipe
Select Preload
Swipe to wipe
Reboot back into twrp
Then try flashing no-verity/rmm zips files - reboot back into twrp.
Normally, for me , after this stage If i still get 0mb I will reboot into the Android system and then back into twrp. Then check in backup menu storage. If ok then try to flash custom rom.
spawnlives said:
Failed to mount preload seems to affect some users.
You could try after the format data and reboot back into twrp ( using twrp 3.3.1.1 ):
Select wipe menu
Select advanced wipe
Select Preload
Swipe to wipe
Reboot back into twrp
Then try flashing no-verity/rmm zips files - reboot back into twrp.
Normally, for me , after this stage If i still get 0mb I will reboot into the Android system and then back into twrp. Then check in backup menu storage. If ok then try to flash custom rom.
Click to expand...
Click to collapse
Yes Yes!! After doing the Preload i am able to flash no-verity/rmm zips file.
But Data is still showing 0MB.....
I thought why not give the lineage OS rom flashing another try. That worked, but now the phone seems to hang on a Lineage OS logo with a small circle moving around not straight line.
So i wiped everything again and flashed no-verity/rmm zip file, and will wait what for some advice and what do to next.
TheGeneral said:
Yes Yes!! After doing the Preload i am able to flash no-verity/rmm zips file.
But Data is still showing 0MB.....
I thought why not give the lineage OS rom flashing another try. That worked, but now the phone seems to hang on a Lineage OS logo with a small circle moving around not straight line.
So i wiped everything again and flashed no-verity/rmm zip file, and will wait what for some advice and what do to next.
Click to expand...
Click to collapse
Have you tried to reboot into system through twrp ie: reboot menu - system. Let it start normally, reboot into twrp, then check storage size. ( This is after the flashing of the no-verity/rmm zip and rebooting back into twrp ).
As I said I' m not familiar with custom ROMs. I do know that some custom ROMs do take some time to boot up on installation.
But out of curiosity I have a spare S8 and will give it a go.
My new Xiaomi Poco X3 Pro is showing an error screen after some time, like in this post:
https://forum.xda-developers.com/t/cant-load-android-system-lineageos.4314035/
It reads "Can't load Android system. Your data may be corrupt. If you continue to get this message, you may need to perform a factory data reset and erase all user data stored on this device"
This happened so far:
I just unlocked the boot loader of my new phone after week of waiting.
I followed the official lineage instructions to install the OS: https://wiki.lineageos.org/devices/vayu/install
Everything worked including the sideloading via db.
I downloaded those two files for the LineageOS-Site:
- Recovery via fastboot: lineage-18.1-20211203-recovery-vayu.img (recovery works, I can still boot into recovery)
- System via adb: lineage-18.1-20211203-nightly-vayu-signed.zip
I also added Gapps via adb: "open_gapps-arm64-11.0-nano-20211204.zip"
Both adb transfers exited successfully.
After the first error screen
- I tapped Try again,
- When the error occurred again, I tapped "Factory data reset," but the error still occurred. The phone is new, no user data is on the phone.
- I booted into recovery and reset all the data I could. When I tap "Format system partition" it throws an error "E: Failed to open /dev/block/dm-0: No such file or directory. System wipe failed."
- Then I repeated the adb sideload. The error occurs again.
- I removed the SIM card, as someone in the forum suggested this could be a problem source. The error still occurs.
What can I do now?
----
Update [2021-12-05 Sun 20:09]
It seems to be a Problem with the GApps Version.
What I did Try so far is:
- Install 03-12-LOS and latest GApps via LOS recovery (didn't work)
- Install 03-12-LOS and latest GApps via TWRP recovery (didn't work)
- install LOS Build from 26-11-2021 without GApps (works)
- Install LOS Build from 26-11-2021 with latest GApps (didn't work)
- Install LOS Build form 26-11-2021 with GApps from 25-11-2021 (works)
Just use TWRP, flash ROM and AFTER flashing ROM Format Data where you have to type "yes". (Format, not Wipe)
Xiaomi Poco X3 Pro
Disclaimer:Team Win strives to provide a quality product. However, it is your decision to install our software on your device. Team Win takes no ...
twrp.me
Thanks for the Idea. At the moment it has not solved the problem.
This is what I did:
- Flash TWRP
Code:
fastboot flash recovery TWRP-3.5.2-vayu-Nebrassy-2.img
- copy lineage-18.1-20211203-nightly-vayu-signed.zip and "open_gapps-arm64-11.0-nano-20211204.zip" to the Poco device
- install via "install" option, wipe cache at the end of installation
- Format files (via "Wipe" -> "Format Data" -> type "yes")
- Reboot
After some time of the animated Lineage OS logo, the phone reboots into TWRP.
To me this seems very similar to the Lineage recovery before.
Any ideas what could be wrong?
You probably wiped System or Vendor partition or something, you are not supposed to do that.
Most likely you have to reflash MIUI now first. Make sure it's atleast version 12.5.X.X.
Flashing instructions are really simple, this apply to all ROM's.
FIRST INSTALL?:
Remove any fingerprint, PIN, or password in MIUI
Unlock the bootloader
Transfer ROM to internal storage
Install any suitable recovery
Flash ROM zip file
Do a data wipe in recovery (format data)
Reboot to the system, wait and enjoy
FLASHING UPDATES?:
Download via OTA Updater and let it automatically install; OR
Download an update, transfer to internal/external storage (always check file sha256)
Flash ROM zip and reboot.
Do not wipe anything else or add any additional steps. (maybe except Gapps if ROM doesn't have them included)
ps.
In first post there is no mention if you did Format Data or not and when you did it. Like i said before - you have to Formata DATA AFTER flashing ROM . Not before.
This happened so far:
I just unlocked the boot loader of my new phone after week of waiting.
I followed the official lineage instructions to install the OS: https://wiki.lineageos.org/devices/vayu/install
Everything worked including the sideloading via db.
I downloaded those two files for the LineageOS-Site:
- Recovery via fastboot: lineage-18.1-20211203-recovery-vayu.img (recovery works, I can still boot into recovery)
- System via adb: lineage-18.1-20211203-nightly-vayu-signed.zip
I also added Gapps via adb: "open_gapps-arm64-11.0-nano-20211204.zip"
Both adb transfers exited successfully.
Click to expand...
Click to collapse
k3lcior said:
In first post there is no mention if you did Format Data or not and when you did it. Like i said before - you have to Formata DATA AFTER flashing ROM . Not before.
Click to expand...
Click to collapse
I followed the LOS Install Guide: https://wiki.lineageos.org/devices/vayu/install But this procedure does not seem to bee the cause (see below).
Download the LineageOS installation package that you would like to install or build the package yourself.
Optionally, download an application package add-on such as Google Apps (use the arm64 architecture).
If you are not in recovery, reboot into recovery:
With the device powered off, hold Volume Up + Power. When Xiaomi/POCO/Redmi splash appears, release Power and keep pressed Volume Up until recovery appears.
Now tap Factory Reset, then Format data / factory reset and continue with the formatting process. This will remove encryption and delete all files stored in the internal storage, as well as format your cache partition (if you have one).
Return to the main menu.
Sideload the LineageOS .zip package:
On the device, select “Apply Update”, then “Apply from ADB” to begin sideload.
On the host machine, sideload the package using: adb sideload filename.zip.
Click to expand...
Click to collapse
Okay so this is what I did (the part that works):
- I downloaded the latest possible stock ROM from https://www.xda-developers.com/down...ut-several-xiaomi-redmi-mi-poco-devices/#vayu The fastboot ROM is more than 5GB.
- Extract the file "vayu_eea_global_images_V12.5.3.0.RJUEUXM_20211015.0000.00_11.0_eea_05cc38de43.tgz"
- then connect the phone via USB cable in fastboot mode and:
Bash:
cd ~/Downloads/vayu_eea_global_images_V12.5.3.0.RJUEUXM_20211015.0000.00_11.0_eea
/bin/bash ./flash_all.sh
- The default MIUI starts flawless, as it dit the first time I turned on the phone. So far so good.
What didn't work:
1. I installed the LOS Recovery again and flashed the OS and Gapps. Only after that I did step 3 - formating. The result ist the same bootloop as in the beginning.
2. I flashed the stock MIUI ROM again (which woks fine). Then I flashed TWRP, transfered the OS and GApps file and installed. I did not wipe anything, just used "format data" like above.
In both cases the OS does not start. After a while displaying the LOS-logo the phone reboots to recovery.
What did work:
I downloaded lineage-18.1-20211126-nightly-vayu-signed.zip, one version before the latest verion and the corresponding recovery lineage-18.1-20211126-recovery-vayu.img
I flashed only the OS, and no GApps -- and it launched successfully. Installing with the latest GApps failed again.
Install older gapp, not all gapp is compatible