SIBERIA KERNEL
Disclaimer:
Use this kernel at your own risk. Flashing it may brick your device. I'm not responsible for any software/hardware and any kind of damages/losses.
NOTE : Use only on EMUI8 base(stock or custom)
kernel works on all hi6250 devices with emui 8, currently tested on (thanks @AltairFR for the list) :
PRA-LX1/PRA-L31
RNE-L03
BLN-LX1
REQUIREMENTS :
Unlocked bootloader
EMUI 8
On some Devices (RNE) is needed a low version of EMUI or WiFi will be broken
Changelog : 4.4.302_1.1
Fixed wifi on some Emui version ( thanks to @A2L5E0X1 for sharing HarmonyOs source)
Spoiler: Old Changelogs
Changelog : 4.4.200:
Upstreamed to 4.4.200
Add 2 additional Big cores to hotplug
configs: Enabled westwood and set as default
configs: Disabled Huawei DUBAI
configs: Disabled Huawei's root scanners
4.4.215
Upstreamed to v4.4.215
Toggable SELinux
Enabled FRANDOM
Enabled Boeffla wakelock blocker
TCP speed improvement
Enabled Simple LMK
4.4.280
Upstreamed to v4.4.280
Enabled and fixed Android LMK (thanks to @AltairFR) [on Android 11]
4.4.296
Upstreamed to v4.4.296
4.4.300
Upstreamed to v4.4.300
4.4.302
Upstreamed to v4.4.302
Refactor f2fs
Refactor sdcardfs
Disabled Some log spam
4.4.302_1.0
Revert to Huawei's f2fs
Add Honor 6x camera drivers
Download:
Siberia - v4.4.302_1.1
Spoiler: Old Versions
Siberia - v4.4.200
Siberia - v4.4.215
Siberia - v4.4.280
Siberia - v4.4.296
Siberia - v4.4.300
Siberia - v4.4.302_1.0
How to flash:
1- Extract the zip file
2-(Optional) Compare sha1sum to verify img file
3-Flash
The kernel img can be flashed by fastboot or in TWRP :
open a terminal from the pc and type (cable connected and set to "File Transfer") :
-adb reboot bootloader
-fastboot flash kernel <Drag img file here> && fastboot reboot
XDAevDB Information
Siberia Kernel, Kernel for the P8 lite 2017
Contributors
@TureX
Source Code:
GitHub - turex/siberia_hi6250_kernel
Contribute to turex/siberia_hi6250_kernel development by creating an account on GitHub.
github.com
Thanks To:
@AltairFR
@DarkJoker360
@haky 86
@0ckysaurus
@aled99
@Dil3mm4
Version Information
Status: Stable
Current Stable Version: v1.0
Stable Release Date: 10-12-2021
Created 10-12-2021
Last Updated 10-12-2021
#reserved
For the moment This kernel works on PRA-LX1 and on RNE-LX3
AltairFR said:
For the moment This kernel works on PRA-LX1 and on RNE-LX3
Click to expand...
Click to collapse
works on PRA-LA1 c10 ?
moitreker said:
works on PRA-LA1 c10 ?
Click to expand...
Click to collapse
HI!
Should works. Let me know!
Cheers
TureX said:
HI!
Should works. Let me know!
Cheers
Click to expand...
Click to collapse
OK. Later. How is it for energy saving?
moitreker said:
OK. Later. How is it for energy
Click to expand...
Click to collapse
As you can see, kernel is in first stage of development. At the moment is just upstreamed with some customization(see changelog). Test and let me know!
Hi,
I've tried it on RNE-L21 since it is a hi6250 device.
Most of the things are working fine, but device cannot connect to any WIFI hotspot,
It finds it but cant connect to it as the password would be incorrect. Device runs AltairFR crDroid rom.
Thanks,
P.
11spqr said:
Hi,
I've tried it on RNE-L21 since it is a hi6250 device.
Most of the things are working fine, but device cannot connect to any WIFI hotspot,
It finds it but cant connect to it as the password would be incorrect. Device runs AltairFR crDroid rom.
Thanks,
P.
Click to expand...
Click to collapse
Hi!
Is hotspot working on stock kernel? Can you please provide logcat and a dmesg log?
Cheers
11spqr said:
device cannot connect to any WIFI hotspot,
It finds it but cant connect to it as the password would be incorrect.
Click to expand...
Click to collapse
Try to install an older EMUI build.
Hmm, You mean the router?, One is on stock rom and second runs openwrt 21.20.
Phone could connect to those routers just fine on huawei stock kernel.
When I've installed Syberia kernel, phone cannot conect to any of them(routers), it behave like the password would be wrong, phone is trying to autenthicate but fails.
On stock rom and stock kernel WIFI hotspot on the phone was working fine, but I havent check it on crDrom, there was no need to use it.
Here is the logcat log taken during connection procedure.
Thanks,
P.
-Alf- said:
Try to install an older EMUI build.
Click to expand...
Click to collapse
Yeap, that's it.
DLOAD-ed emui 8 to 8.0.0.336(C432) and wifi is working now.
Respect,
Thank You so much.
P
11spqr said:
Yeap, that's it.
DLOAD-ed emui 8 to 8.0.0.336(C432) and wifi is working now.
Respect,
Thank You so much.
P
Click to expand...
Click to collapse
Glad to help.
WIFI is ok on my LeaOS and kernel 200. My phone is a PRA-LX1 with EMUI 8.0.0.402
AltairFR said:
WIFI is ok on my LeaOS and kernel 200. My phone is a PRA-LX1 with EMUI 8.0.0.402
Click to expand...
Click to collapse
Mine, which failed to connect, was 8.0.0.400. Have no idea why and what were the changes between 336 and 400, and the most important thing, if it is worth to ceck which one is the latest that I can use with this kernel.
Now my phone uses yours crDroid and TureX 200 kernel on emui 336.
Thank you all.
P.
Thank you for the information. I didn't know this bug was on EMUI 8 too.
Added to requirements.
11spqr said:
Hmm, You mean the router?, One is on stock rom and second runs openwrt 21.20.
Phone could connect to those routers just fine on huawei stock kernel.
When I've installed Syberia kernel, phone cannot conect to any of them(routers), it behave like the password would be wrong, phone is trying to autenthicate but fails.
On stock rom and stock kernel WIFI hotspot on the phone was working fine, but I havent check it on crDrom, there was no need to use it.
Here is the logcat log taken during connection procedure.
Thanks,
P.
Click to expand...
Click to collapse
Could you please share if If you still have the logcat?
moitreker said:
works on PRA-LA1 c10 ?
Click to expand...
Click to collapse
What is the vendor kernel version of your phone ?
TureX said:
Could you please share if If you still have the logcat?
Click to expand...
Click to collapse
Uh sorry.
I thought I've attached it.
Moreover, I've installed 200 kernel on 8.0.0.342 and wifi is working good.
Thanks,
P.
Edit:
It seem i cannot attach any file. Strange.
I've send you PM with logcat.
Hi!
New update is online!
Cheers
Related
Hello Guys we are back with BaBa Baltkari kernel with the never Imagined OTG-Support
Features :-
1:- Governors :- ZZMOVE, ALUCARD,YANKACTIVE,DARKNESS
2:- I/0 Scheduler :- BFQ,NOOP,ETC
3- Thermal Balancing For Heat Issues.
4:- Intelli-plugs - Faux And Alucard
5:-OverClocked :- 1.6ghz
6:- GPU-Overclocked :- 465Mhz
7:- Faux Sound
8:-New Decompression Algorithm
9:-Selinux fixes
10:-OTG
11rimate ( Triangle Work-over cue ){Thanks to NamelessLOST} (Android Forums)
12:- Tweaked For Mokee Based Roms :cyclops:
13:- FastCharge
14:- Wifi Working!
Working Roms Reported So Far :-
1:- Mokee Roms all 32 bit
2:-Cm12.1 32bit by ed300
3:-MiUi (There Is bug When you Disconnect the Otg Cable the Device Reboots as Soon as The Flash storage is unmounted thanks to Indonesian Testers Looks Source of Huwai Honor 4X needs to be updated )
Join Our Development Group to Be a part of this Journey :-
Development Group :- https://www.facebook.com/groups/1558383554488300
Developer's Profile :- https://www.facebook.com/profile.php?id=100001674910795
Downloads :-
<MOD EDIT LINK REMOVED>http://d-h.st/7M9B
INSTRUCTIONS :-
1 - Flash Your Mokee 32 Bit rom
2 -Flash Gapps
3 - Flash Kernel
4 - Reboot
5- Profit
Instructions For cm12.1 By Ed300
1- Flash rom
2- Flash Gapps
3 Flash this Module https://userscloud.com/u1les4oq9uy3 thanks To @ED300
4- flash My Kernel
5- Reboot
Special Thanks to - @Tarun93 - His Helpful Tips - Tricks And Handy Git Without him this kernel was not possible @JavTeam - Kernel Source @FloroMu - Kernel Source
My Bro Sagar Adhikari Who tested and reported
our Development group for motivation
I will Upload my Source link later For you all to play with otg around
Future Plans :-
1:-Gpu oc -625
2:-More Governors
3:-WakeMods
XDA:DevDB Information
[KERNEL][BaBa ChamtKari][Mokee/cm12.1/miui(llp)][OTG][Over-Clocked][2.0], Kernel for the Lenovo A6000/Plus
Contributors
sdousbraviaenginelover, Sagar Adhikari, Tarun93
Source Code: https://github.com/lenovo-Kraft-T/android_kernel_lenovo_msm8916/tree/cm-12.1
Kernel Special Features: 1.otg 2.FastCharge 3.FauxSound 4.Best-Governors 4.Badly Tweaked 5.Charge Lover
Version Information
Status: Stable
Current Stable Version: 3.10.x
Stable Release Date: 2016-04-13
Created 2016-04-14
Last Updated 2016-04-16
Reserved
To use otg u must purchase a usb y cable as external power is needed filesystem supported :- fat32,ext4
My computer detects it as a virus.
Also how to flash, there is a executable file inside a .rar file.
no signature or image file?
X64 support? Kernel sources link?
Thanks working awesome.Appreciate your work...
-Sourav_8434
lolz Found Virus !!
Iqbal Ansari said:
My computer detects it as a virus.
Also how to flash, there is a executable file inside a .rar file.
no signature or image file?
Click to expand...
Click to collapse
U Must Have Downloaded the Wrong File there is Zimage And No executable File There Only Anykernel Scripts
And Press The Thanks Button
x64 Bit Why Not xD
crashdjent said:
X64 support? Kernel sources link?
Click to expand...
Click to collapse
I will Do x64 Bit Kernel As soon As I Get aleast 20 thanks On This Thread I worked hard And sources Will be Out Soon after the release of x64 Bit Kernel
Great work!
can you make some videos to demonstarte how the OTG works.
that will be awsome
proof Seeking I Know Its hard to Belive So SS For You
hezler said:
can you make some videos to demonstarte how the OTG works.
that will be awsome
Click to expand...
Click to collapse
Take This Enjoy Press the Thanks Too
sdousbraviaenginelover said:
Take This Enjoy Press the Thanks Too
Click to expand...
Click to collapse
well, currently im using cm12.1 64bit by satgass and telo's kernel and i also have that folder too...
videos proff will be great
thanks for your work
just to report bug
zram not working
and if i enable zram the kernel crash
Dude66 said:
thanks for your work
just to report bug
if i enable zram the kernel crash
Click to expand...
Click to collapse
may i ask what mokee are you use?
cause im bootloop lol.
hezler said:
may i ask what mokee are you use?
cause im bootloop lol.
Click to expand...
Click to collapse
ed300-cm12.1 withe kernel models support
Thanks For Reporting The Bug
Dude66 said:
thanks for your work
just to report bug
zram not working
and if i enable zram the kernel crash
Click to expand...
Click to collapse
I am Working On the Bug and will upload a New Build after its declared fixed
Press thanks if i were helpful
loop
hezler said:
may i ask what mokee are you use?
cause im bootloop lol.
Click to expand...
Click to collapse
If On Telo Mokee And Loop Clear Cache Dalvik Cache reboot
If on another mokee You need to wipe /system cache and Dalvik cache xD
Press thanks If I helpd
that is Bug due To the rom
Dude66 said:
thanks for your work
just to report bug
zram not working
and if i enable zram the kernel crash
Click to expand...
Click to collapse
People Reported That It is Working Good in Mokee Roms But For your Sake i can Compile Another from wt86518_defconfig which Is stock Defconfig
I Will Ping You when done
dude why dont u set the minimum frequency as 800mhz instead of 1.3
Sir I ain't Be Giving any proof if you are in indonesian group ask one of them for it
hezler said:
well, currently im using cm12.1 64bit by satgass and telo's kernel and i also have that folder too...
videos proff will be great
Click to expand...
Click to collapse
I will not be giving Proofs Well Why not you try it and Find Out Your self that would be Nice na
Press Thanks If I helped You
sdousbraviaenginelover said:
People Reported That It is Working Good in Mokee Roms But For your Sake i can Compile Another from wt86518_defconfig which Is stock Defconfig
I Will Ping You when done
Click to expand...
Click to collapse
thanks
just want let you know that god kernel doesn't has this issue withe this rom
Disclaimer
Your warranty is now void!
You will be doing everything at your own risk.
I am not responsible for bricked or damaged devices.
What's working
Mostly everything
How to install
1. Wipe system, data and both cache partitions
2. Install the ROM + GApps
3. Wipe again both cache partitions
4. Now you can boot to the system
Download
Unofficial LineageOS 15.1
opengapps
Donate
You want support me with coffee or something else?
Donate via PayPal
Sources
github.com/sgspluss
Credits and Thanks
@sgspluss @vasishath @Shahan_mik3 @nathanchance @kernel.org
Changelog
Code:
[B]lineage-15.1-20190310-UNOFFICIAL-whyred.zip[/B]
Build with clang 9 and sdclang
Update vendor security patch to 2019-03-01
Revert some unnecessary patches
Sync with latest basickernel sources
Sync with latest LineageOS sources
Some other device and kernel stuff
[B]lineage-15.1-20190224-UNOFFICIAL-whyred.zip[/B]
Fix camera bug
Sync with latest basickernel sources
Sync with latest LineageOS sources
Some other device and kernel stuff
[B]lineage-15.1-20190219-UNOFFICIAL-whyred.zip[/B]
Build with clang 8 and sdclang
Update default density to 420
Fix 2nd CPU detection
Sync with latest basickernel sources
Sync with latest LineageOS sources
Some other device and kernel stuff
[B]lineage-15.1-20190113-UNOFFICIAL-whyred.zip[/B]
Update vendor security patch to 2019-01-01
Sync with latest basickernel sources
Sync with latest LineageOS sources
Some other device and kernel stuff
[B]lineage-15.1-20181209-UNOFFICIAL-whyred.zip[/B]
Initial release
Troubleshooting
Nothing to find here...
Nice , whats the difference between this build and the official one.
Any changes in kernel side.
lawong said:
Nice , whats the difference between this build and the official one.
Click to expand...
Click to collapse
niyas90 said:
Any changes in kernel side.
Click to expand...
Click to collapse
Rom: Build with GCC, disabled forceencrypt, update 2nd cpu variant, update default density to 420.
Kernel: include my basickernel which is upstreamed to 4.4.166 (changelog can you find in its thread) just added power button debounce time fix.
What else: upstreamed to latest lineage-15.1 sources with december security patch and some more little under the hood changes.
Next time you can answer the questions yourself quicklier, just look into my sources there you find everything.
Sent from my Redmi Note 5 Pro using XDA Labs
Will my phone encrypted after installing this rom??
[email protected] said:
Will my phone encrypted after installing this rom??
Click to expand...
Click to collapse
Why it should?
With lineage-15.1 aren't any problems unlike in lineage-16.0.
Sent from my Redmi Note 5 Pro using XDA Labs
Thanks a lot! Runs all well and smooth as expected. Only just one question: what is it about this "vendor security patch level" still stuck on "May, 1st" this year? Should we have any worries about that?
mankokoma said:
Thanks a lot! Runs all well and smooth as expected. Only just one question: what is it about this "vendor security patch level" still stuck on "May, 1st" this year? Should we have any worries about that?
Click to expand...
Click to collapse
No not really because its the same as you can find in offical one.
If there was anything to worry about, then you haven't this update but so far its good to go.
As soon as i will find some more free time will update it to an newer one, but as always this needs its time because of the known reasons.
Sent from my Redmi Note 5 Pro using XDA Labs
Great to see work on LOS 15 started again, many thanks! :highfive: Any chance of becoming official?
kim.1 said:
Great to see work on LOS 15 started again, many thanks! :highfive: Any chance of becoming official?
Click to expand...
Click to collapse
All my work is and will be in future unoffical, for offical works you need time which i haven't to be honest, family and work goes before hobby...
Sent from my Redmi Note 5 Pro using XDA Labs
sgspluss said:
All my work is and will be in future unoffical, for offical works you need time which i haven't to be honest, family and work goes before hobby...
Sent from my Redmi Note 5 Pro using XDA Labs
Click to expand...
Click to collapse
That's fine. Only feature I need from official LOS is OTA updates but I can live without it. Btw, I want to migrate from official build, do I need to wipe vendor partition too?
Its recommended but normaly not needed.
Try it without it should work, since vendor is untouched by me.
Sent from my Redmi Note 5 Pro using XDA Labs
How to enable face unlock on this rom ? I already install face unlock module on magisk but it still not show on smart lock. Thanks
Read you need also gravity box (lockscreen tweaks > smart unlock).
But can't say if its true or not, dont using magisk or any other modifications like that.
Sent from my Redmi Note 5 Pro using XDA Labs
Going to try this as soon as I get home. Just one thing, should I be worried about burn-in display on this ROM?
sgspluss said:
disabled forceencrypt
Click to expand...
Click to collapse
does it mean that there is no need to flash "DisableForceEncryption" patch after this ROM if I'm not using encrypted data?
want to update to this ROM from official LOS 15.1 and I'm not sure about encryption
zBear said:
does it mean that there is no need to flash "DisableForceEncryption" patch after this ROM if I'm not using encrypted data?
want to update to this ROM from official LOS 15.1 and I'm not sure about encryption
Click to expand...
Click to collapse
Right not needed because its already disabled.
Sent from my Redmi Note 5 Pro using XDA Labs
sgspluss said:
As soon as i will find some more free time will update it
Click to expand...
Click to collapse
if it's not to much trouble for you, please consider adding the circle battery, like it was in LOS 14
IMHO it's the best battery level presentation
there is a RR (based on LOS) with this option - https://drive.google.com/file/d/1pgNyvPDUb2HjoOEFELO1-BTVBr49h9p4/view
may be it will help you to transfer this feature
Disclaimer :
Code:
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
What Works :
RIL
WIFI
GPS
Bluetooth
Main Camera
Front Camera [Manual Control For Now]
Audio
WV L1
Haptic
Bugs :
Everything else
Youtube :
Download :OOS9K20P_Beta2Mirror 1Mirror 2Base : IN 10.3.5
Instructions :Extract the archive [If 7z File]
Flash OOS System Image
Flash Vendor Patch Zip
Factory Reset
Reboot
Telegram :t.me/k20poos
Credits :erfanoabdi
phhusson
AndyYan
ZH_Yanhuo
realheart
Check Below For Changelog & Fixes
If you like my work, buy me a coffee!
Regards,
acervenky
Changelog
Beta 1 :
Code:
Initial Release
Beta 2 :
Code:
Fixed buggy media audio
Fixed system sounds
Fixed buggy flash
Fixed slow charging
Removed OP USB Driver
Widevine L1 Fixed
Zenmode and other OP apps fixed
Regards,
acervenky
FAQs & Fixes
Heating Issue Fix :
Patch1 : Flash via TWRP
Popup Camera Fix :
Use the K20Pro Motor Control App from this thread.
WIFI Fix :
This rom is based on IN 10.3.5, so I highly recommend flashing the same to avoid any unwanted issues!
Regards,
acervenky
Reserved3
Wow nice, can we expect stable OOS soon??
Great to see OOS getting started on the K20 Pro/Mi 9T Pro!
Edit: What device is this version of OOS taken from?
King_lilrowrow said:
Great to see OOS getting started on the K20 Pro/Mi 9T Pro!
Edit: What device is this version of OOS taken from?
Click to expand...
Click to collapse
Oneplus 7 Pto
@acervenky how did you patch vendor? As there's a Android 10 GSI of OOS that may be better in terms of bugs etc
King_lilrowrow said:
@acervenky how did you patch vendor? As there's a Android 10 GSI of OOS that may be better in terms of bugs etc
Click to expand...
Click to collapse
Some users reported A10 gsi having more bugs like wifi!
Have you found a more stable OOS10 Gsi?
Afaik OOS10 gsis only boot on MIUI11 vendors.
Regards,
acervenky
acervenky said:
Heating Issue Fix :
Install Kernel Auditor and set big-little gov to on-demand or powersave depending on your usage.
Popup Camera Fix :
Use the K20Pro Motor Control App from this thread.
WIFI Fix :
This rom is based on IN 10.3.5, so I highly recommend flashing the same to avoid any unwanted issues!
Regards,
acervenky
Click to expand...
Click to collapse
About the Heating Issue
Please don't post wrong information
You have to start mi thermald service on boot
And it will fix Heating issues
acervenky said:
Beta 1 :
Code:
Initial Release
Beta 2 :
Code:
Fixed buggy media audio
Fixed system sounds
Fixed buggy flash
Fixed slow charging
Removed OP USB Driver
Widevine L1 Fixed
Zenmode and other OP apps fixed
Regards,
acervenky
Click to expand...
Click to collapse
download link looks corrupted
acervenky said:
Some users reported A10 gsi having more bugs like wifi!
Have you found a more stable OOS10 Gsi?
Afaik OOS10 gsis only boot on MIUI11 vendors.
Regards,
acervenky
Click to expand...
Click to collapse
The latest 10.0.1 OOS build I saw in Erfans GSI group, although had no WiFi on first boot was fixed by changing the the extension of a couple of vendor blobs to .bak and reboot and WiFi was good to go.
Wideline L1 mean Netflix works in HD right?
King_lilrowrow said:
The latest 10.0.1 OOS build I saw in Erfans GSI group, although had no WiFi on first boot was fixed by changing the the extension of a couple of vendor blobs to .bak and reboot and WiFi was good to go.
Click to expand...
Click to collapse
Interesting, I'll check it out.
thanhnvt194 said:
Wideline L1 mean Netflix works in HD right?
Click to expand...
Click to collapse
Yes!
z.v.a.a.h.i said:
download link looks corrupted
Click to expand...
Click to collapse
Updated the link and added mirror!
Regards,
acervenky
UtsavTheGreat said:
About the Heating Issue
Please don't post wrong information
You have to start mi thermald service on boot
And it will fix Heating issues
Click to expand...
Click to collapse
hi sir, how and where to start the mi thermald service on boot?
Does VoLte works?
does it boot with EEA Vendor and Firmware (10.3.4) ?
Iam so excited finally oos on k20 pro its gonna be amazing ?? cant wait for a stable one ...gonna be a daily driver for sure
I hope this gets a lot of attention and ends up in a bug-free alternative to MIUI and stock (or other custom ROMs).
I would love to use it
hi. thnx for rom but, we are how to close mı thermal ı cant fınd on kernel audıtor. Double top to sleep and wake not working. Fp not working.
TNO Kernel for LG G7 ThinQ
*Info*
Kernel Version 4.9.207
Compiled with AOSP Clang 9.0.3 with Linaro GCC 7.5
Anykernel and Img provided.
Flash via fastboot or TWRP.
G-Drive Folder
*Features*
25/12/19
Up to date with mainline kernel 4.9
V4.9.207
exFAT support added
Coming soon
LZ4HC
Wireguard support
CONFIG_HZ_300
Using ARM GCC9.2 with Clang 9.0.3
LZ4 Ramdisk
*v4.9.210
**Remove debugging (Confirmed)
**Remove support for modules(Dropped)
**Remove trace_printk() instances(Confirmed)
CAF:
fw-api------------------------LA.UM.7.3.r1-08200-sdm845.0
qcacld-3.0--------------------LA.UM.7.3.r1-08200-sdm845.0
qca-wifi-host-cmn----------LA.UM.7.3.r1-08200-sdm845.0
techpack---------------------LA.UM.7.3.r1-08700-sdm845.0
Kernel is ready and is being tested for stability
I need someone as a beta tester, leave a comment if you are interested.
Make requests for features that you want.
*Sources*
Kernel Source
fw-api
qcacld-3.0
qca-wifi-host-cmn
techpack
*Contributors*
arter97
nathanchance
*Disclaimer*
Your warranty is now void.
I do not take responsibility for any damage caused to your device with the use/misuse of this kernel.
Im download your work, and tested on latest EM20e, and get bootloop on bootanimation, give me Image.gz-dtb
ZNCHNK said:
Im download your work, and tested on latest EM20e, and get bootloop on bootanimation, give me Image.gz-dtb
Click to expand...
Click to collapse
Here you are, please let me know if it works: https://drive.google.com/open?id=1QG2sjuBDZgjXACKe-2lyc4ezcbjWbDun
thenotonly said:
Here you are, please let me know if it works: https://drive.google.com/open?id=1QG2sjuBDZgjXACKe-2lyc4ezcbjWbDun
Click to expand...
Click to collapse
strange but bootlap(my device is G710PM installed v20e from EM version) in the evening I’ll roll back to EM20D and write result.
ZNCHNK said:
strange but bootlap(my device is G710PM installed v20e from EM version) in the evening I’ll roll back to EM20D and write result.
Click to expand...
Click to collapse
Don't rollback. You need to replace the ramdisk in the kernel with yours and it should work.
Send me your current boot image if you don't know how to do it. PM
Can you also give me the device name that's present in your build.prop?
getprop ro.product.name
Hi, I'm on stock pie rom with magisk, firmware version is V20c, buildprop name is "judyln_lao_com". Is it safe to flash? Anything you are aware of that is not working properly?
FluffyDiscord said:
Hi, I'm on stock pie rom with magisk, firmware version is V20c, buildprop name is "judyln_lao_com". Is it safe to flash? Anything you are aware of that is not working properly?
Click to expand...
Click to collapse
Should work fine
does not have support for micro sd in exFat format
good
HimikoMw said:
does not have support for micro sd in exFat format
Click to expand...
Click to collapse
support added
thenotonly said:
support added
Click to expand...
Click to collapse
does not work,need a log?
thenotonly said:
support added
Click to expand...
Click to collapse
Thank you very much, now it works.
HimikoMw said:
Thank you very much, now it works.
Click to expand...
Click to collapse
exfat work on your device wich this kernel?
ZNCHNK said:
exfat work on your device wich this kernel?
Click to expand...
Click to collapse
version V4.9.207
can i install via fastboot ? also it works on 20b ?
Emanel000000 said:
can i install via fastboot ? also it works on 20b ?
Click to expand...
Click to collapse
Yes
Work good
thenotonly said:
Yes
Click to expand...
Click to collapse
i got bootloop also myb i had 20c
Feature requests:
0% auto brightness
Option (terminal is fine) to lower overall auto screen brightness by X percent (feels like it's unnecessarily bright under normal light)
Force QuadDac high impedance
(No idea how it works and if possible from your side, but it's LG G7 kernel specific, or so I have heard ->) Somehow make JamesDSP magisk add-on work
Make it so that CPU/GPU/IO settings sticks (in kernel auditor for example) (maybe implemented ?, fells like it's resetting)
CPU governors: Alucard, OnDemandPlus
GPU governors: Adreno Idler
I/O scheduler: Zen
does it work with lineage os? Edit: i tested and it bootloops, can you make a compatible version non-twrp the image
Coconut Kernel for LineageOS 18.1 - With Nethunter Support
Code:
***I wont be responsible for any problems that might occur flashing this kernel or what you do with the kernel support***
Just flash the kernel from recovery for supported ROMs.
You can use this kernel for Nethunter functions and other chroot applications like Linux Deploy.
HID and DriveDroid patches are also included.
Note:- The USB Wifi adapter firmware collection is also included with the zip and will be automatically installed. No need to use additional magisk module for installing firmwares.
Source
https://github.com/xpz3/android_kernel_oneplus_msm8996-2
hi, does it work with PE A11? thanks
mohawahba said:
hi, does it work with PE A11?
Click to expand...
Click to collapse
This is compiled from los 18.1 kernel source with modifications for nethunter. I don't use custom rom much, so i don't know about specific features that a custom rom like pe have. If the android version is same, it should work, but if the rom has any special feature that's dependent on the kernel it may or may not work. You can try flashing and see. If it doesn't work, just go back to the old kernel.
Hi!
So i have some problems with getting my wifi-adapter working, can u help me?
So i have Lineageos 18.1 installed om my op3t, latest nt from kali website and your kernel. Using a RTL8811AU, i can see it with lsusb and i cant find any errors in dmesg. I have tried to change otg adapter and i have tried with y-cable. But still no luck... Is there anything else i can try?
thx for help.
jobsdonn said:
Hi!
So i have some problems with getting my wifi-adapter working, can u help me?
So i have Lineageos 18.1 installed om my op3t, latest nt from kali website and your kernel. Using a RTL8811AU, i can see it with lsusb and i cant find any errors in dmesg. I have tried to change otg adapter and i have tried with y-cable. But still no luck... Is there anything else i can try?
thx for help.
Click to expand...
Click to collapse
Whats the issue you're facing?
@fredrickz
Thank you for this kernel
Just a question:
which nethunter version do I have to install?
On the kali.org page are nethunter releases for pie and ten. But not for eleven - this kernel is for eleven.
Do I install a eleven Custom ROM and then the nethunter PIE version and then this nethunter kernel?
fredrickz said:
Whats the issue you're facing?
Click to expand...
Click to collapse
I have the same problem with TP-LINK TL-WN722N (RTL8188EUS) - it looks nice in lsusb, no problems are reported in dmesg, but no wlan1 device ... Do i miss something?
nadastry said:
@fredrickz
Thank you for this kernel
Just a question:
which nethunter version do I have to install?
On the kali.org page are nethunter releases for pie and ten. But not for eleven - this kernel is for eleven.
Do I install a eleven Custom ROM and then the nethunter PIE version and then this nethunter kernel?
Click to expand...
Click to collapse
Flash generic arm64 installer, then this kernel
Which toolchain do you use to build your kernel?
HI
I have flashed your kernel,but when I try to use rucky,it Pop-up ”kernel not supported!“
How can I fix it？
jlock. said:
HI
I have flashed your kernel,but when I try to use rucky,it Pop-up ”kernel not supported!“
How can I fix it？View attachment 5895271
Click to expand...
Click to collapse
fixed the problem，just need to flesh agian
Any solution with missing wlan1 adapter? HID also doesnt work. OnePlus3T + LineageOS 18.1 + NetHunter Lite ARM64 + Kernel
lemongrass1717 said:
Any solution with missing wlan1 adapter? HID also doesnt work. OnePlus3T + LineageOS 18.1 + NetHunter Lite ARM64 + Kernel
Click to expand...
Click to collapse
wow! still active people here! are you chinese? i'm planing to rebirth my old op3. does this kernel wifi driver have problem? maybe you can try offical nethunter for op3
XDrz said:
wow! still active people here! are you chinese? i'm planing to rebirth my old op3. does this kernel wifi driver have problem? maybe you can try offical nethunter for op3
Click to expand...
Click to collapse
Official nethunter requires android 10, last official oxygenOs is android 9 but the only available lineageOs for op3t is 18.1 on android 11. Probably Im doing something wrong but I still couldn't make wifi adapter work
XDrz said:
wow! still active people here! are you chinese? i'm planing to rebirth my old op3. does this kernel wifi driver have problem? maybe you can try offical nethunter for op3
Click to expand...
Click to collapse
Seems missing build-in driver is a culprit of non working adapter. Is there an actual guide how to compile kernel from source? I could try to add driver to kernel and recompile it.
lemongrass1717 said:
Seems missing build-in driver is a culprit of non working adapter. Is there an actual guide how to compile kernel from source? I could try to add driver to kernel and recompile it.
Click to expand...
Click to collapse
KernelSu is a new root solution for android kernel, there shows some docs about kernel source compilation and module integration. I've tried several times, not so hard but so messy，lots of trivial details(such as adding lost source, changing argvs for compiler.....) you should search for solutions and solve.
Building Kernels | Android Open Source Project
source.android.com
How to build KernelSU? | KernelSU
A kernel-based root solution for Android GKI devices.
kernelsu.org
lemongrass1717 said:
Seems missing build-in driver is a culprit of non working adapter. Is there an actual guide how to compile kernel from source? I could try to add driver to kernel and recompile it.
Click to expand...
Click to collapse
Here's my guide.
Since this kernel is already a NetHunter patched, I recommend clone this post's source, so you don't need to start from scratch. If it's kernel 3.x, I usually have to nuke the rtl8xxxu folder and apply this: https://gitlab.com/kalilinux/nethun...d-rtl8xxxu-with-rtl8188eus-drivers-3.18.patch, because the patch from 4.x (adds only rtl8188eus) is for a newer base driver.
You can also add rtl88xxau if you're there, and if you want: https://gitlab.com/kalilinux/nethun...add-rtl88xxau-5.6.4.2-drivers-3.18-h990.patch or https://gitlab.com/kalilinux/nethun...3.10/add-rtl88xxau-5.6.4.2-drivers-3.10.patch
yesimxev said:
Here's my guide.
Since this kernel is already a NetHunter patched, I recommend clone this post's source, so you don't need to start from scratch. If it's kernel 3.x, I usually have to nuke the rtl8xxxu folder and apply this: https://gitlab.com/kalilinux/nethun...d-rtl8xxxu-with-rtl8188eus-drivers-3.18.patch, because the patch from 4.x (adds only rtl8188eus) is for a newer base driver.
You can also add rtl88xxau if you're there, and if you want: https://gitlab.com/kalilinux/nethun...add-rtl88xxau-5.6.4.2-drivers-3.18-h990.patch or https://gitlab.com/kalilinux/nethun...3.10/add-rtl88xxau-5.6.4.2-drivers-3.10.patch
Click to expand...
Click to collapse
Followed you guide:
1. Downloaded kernel source
2. Patched it with https://gitlab.com/kalilinux/nethun...d-rtl8xxxu-with-rtl8188eus-drivers-3.18.patch
3. Getting Error on compile
I also tried to add this drivers manualy to kernel https://github.com/aircrack-ng/rtl8188eus and run compile. Seems it compiled OK but on TWRP I get Unsupported Device Error
yesimxev said:
Here's my guide.
Since this kernel is already a NetHunter patched, I recommend clone this post's source, so you don't need to start from scratch. If it's kernel 3.x, I usually have to nuke the rtl8xxxu folder and apply this: https://gitlab.com/kalilinux/nethun...d-rtl8xxxu-with-rtl8188eus-drivers-3.18.patch, because the patch from 4.x (adds only rtl8188eus) is for a newer base driver.
You can also add rtl88xxau if you're there, and if you want: https://gitlab.com/kalilinux/nethun...add-rtl88xxau-5.6.4.2-drivers-3.18-h990.patch or https://gitlab.com/kalilinux/nethun...3.10/add-rtl88xxau-5.6.4.2-drivers-3.10.patch
Click to expand...
Click to collapse
Nevermind. I fixed it and re-compiled the kernel. Seems it fixed problem with adapter visiibility. Thanks again for the awesome guide.
lemongrass1717 said:
Nevermind. I fixed it and re-compiled the kernel. Seems it fixed problem with adapter visiibility. Thanks again for the awesome guide.
Click to expand...
Click to collapse
Awesome! I mean if you want to use the same kernel, and just adding some patches, clone the already existing NH kernel source. Nice