is anyone working on a android 11 or android 12 for these MTCD headunits?
Calling Mr someone to a second thread.
There is no A11 or 12 for MTCx head units.
TechGuru123 said:
is anyone working on a android 11 or android 12 for these MTCD headunits?
Click to expand...
Click to collapse
Dasaita should support that? VIVID supports android 11.
there is a px4 chip with android 11 at isudar units but i cant tell the different
lagos911 said:
there is a px4 chip with android 11 at isudar units but i cant tell the different
Click to expand...
Click to collapse
It's likely fake and not MTCD
there is android 11 px4 eonon head unit
Eonon R50 Android 11 BMW E46 9 Inch Car Stereo | Eonon.com
Eonon Newest Android 11 Car Stereo Designed for 1999-2005 BMW 3 Series E46. Support Wired and Wireless Apple CarPlay & Android Auto. Eonon BMW 3 Series E46 Car Radio with 9 Inch IPS Display.
www.eonon.com
dude i dont if i dont see the number 11 at the system info i dont believe nothing
I just bought this on Ebay.de:
Dasaita 10.2" Autoradio GPS für Mazda CX5 CX-5 2012-2016 BT RDS USB 4G+64G Wifi [Link]
The model-name on the bag and carton: HA5336A-MAX-11-CP-HD
So it looks like Android 11
EDIT: Oh sorry. It's not MTCD, but MTCH
Its for px6 new build new mcu and new kernel version looks like to be true... but the launcher sucks...
Can somebody how owns the unit request the firmware from store to test it?
I would be most interested in Api. Android 11 has API level 30. Install HW Device Information and create a system bookmark screen. If API is 30, I'll believe it. If there's API 29, it's fake.
Device Info HW - Apps on Google Play
Hardware and software information app for Android devices.
play.google.com
https://source.android.com/setup/start/build-numbers
Яндекс
Найдётся всё
disk.yandex.ru
rom for px4 with android 11
Extracting [update.zip].....OK
Extracting brotli compresssed system image.....OK
Extracting brotli compresssed vendor image.....OK
Converting system dat image to ext4 image.....OK
Converting vendor dat image to ext4 image.....OK
Extracting [odm.new.dat.br].....OK
Extracting [odm.patch.dat].....OK
Extracting [odm.transfer.list].....OK
Extracting [system.raw].....OK
Extracting [vendor.raw].....OK
Checking project creation status.....OK
Cleaning up Project.....OK
Building standalone installer.....OK
Printing created project info...
Device factory: ROCKCHIP
Device model: rk3566
Device code name: rk3566_r
Device chipset: llun
Device arch: armeabi-v7a
Android version: 11
Android SDK: 30
Android build ID: RQ3A.210705.001
Android display ID: rk3566_r-userdebug 11 RQ3A.210705.001 eng.hct2.20211018.182516 release-keys
Default ADB state: Enabled
Deodex status: Odexed
Installer general status: Standalone exists
Installer permissions status: Exists
Installer symlinks status: Generated
Project creation finished successfully
lagos911 said:
Яндекс
Найдётся всё
disk.yandex.ru
rom for px4 with android 11
Click to expand...
Click to collapse
This firmware is rooted
Related
Can anyone be kind and help me
Is a bit new with this and hope it goes and update to newer android on this player
Mcu Verson
MTCD KGL V2.43_1
Mar31 2017 09:22:12
Android 6.01
Kernel versjon
3.10.0
Delversjonsnummer
px5-userdebug 6.0.1 MXC89L user.hct
Hmm is there nobody how can help me?
svennok said:
Can anyone be kind and help me
Is a bit new with this and hope it goes and update to newer android on this player
Mcu Verson
MTCD KGL V2.43_1
Mar31 2017 09:22:12
Android 6.01
Kernel versjon
3.10.0
Delversjonsnummer
px5-userdebug 6.0.1 MXC89L user.hct
Click to expand...
Click to collapse
Kind of confused on the Buying Google Play. If you want to update Google Play and use a different login, I would say.
Go to Settings> Apps Manager> Delete Google Play and reinstall it. It should be free.
Hello everybody,
Following problem: I have a programmable ECU ( Hondata Kpro V4 ) with Bluetooth 4.0 ( BT-Name: Kpro ) installed in my car. I want to use the Hondata mobile App, but I can not pair the ECU with the radio. If I go to the Bluetooth setting, then the ECU is found, but I can not pair it. However, this process works perfectly with my Samsung phone. The various Bluetooh settings in the factory mode, I've done without success. With other BT OBD2 adapters I had no success either
Radio : Pumpkin Android 8.0.0
Model: PX5 (800x480)
Kernel: 4.4.93+ [email protected] #239
Build Number: px5-uderdebug 8.0.0 OPR5.170623.007eng.hct. 20180503. 142728
MCU: MTCE_KLD_V2.80_1
Many thanks for the help
DaveDC5 said:
Hello everybody,
Following problem: I have a programmable ECU ( Hondata Kpro V4 ) with Bluetooth 4.0 ( BT-Name: Kpro ) installed in my car. I want to use the Hondata mobile App, but I can not pair the ECU with the radio. If I go to the Bluetooth setting, then the ECU is found, but I can not pair it. However, this process works perfectly with my Samsung phone. The various Bluetooh settings in the factory mode, I've done without success. With other BT OBD2 adapters I had no success either
Radio : Pumpkin Android 8.0.0
Model: PX5 (800x480)
Kernel: 4.4.93+ [email protected] #239
Build Number: px5-uderdebug 8.0.0 OPR5.170623.007eng.hct. 20180503. 142728
MCU: MTCE_KLD_V2.80_1
Many thanks for the help
Click to expand...
Click to collapse
What have you tried and what steps dont work for you from reading through MTCD section on the topic of pairing BT OBD2 devices in MTCD?
Hello,
I have this computer and I would like to update it to a higher version of Android.
8 "OCTACORE ANDROID 6.0 2G RAM 32GB RADIO DVD GPS SPORTAGE 10-15
[EX-B5743]
Up to what version can I update and which one do you recommend?
Can you provide a manual on how to update and where to download the update?
Excuse my little knowledge about these issues but I would not like to make a mistake and leave my multimedia as a brick.
Sincerely,
Could any rom be installed?
As far as I know you can install any MTCD/MTCE rom, but not all Bluetooth modules are supported by Android 10. Don't forget to update to the latest MCU.
Install instructions:
upgrade method to another android version for Rockchip unit (px6 px5 Px30 and other )
following the official Rockchip upgrade tool https://forum.xda-developers.com/android-auto/mtcd-software-development/mtcd-e-android-10-upgrade-using-t4123933 if you are upgrading from the same version ex android 9 to android 9 you don't need...
forum.xda-developers.com
Source for ROM and MCU:
Yandex
Finds everything
yadi.sk
thanks for the advice. Best regards.
Hello all you Guys, wish you all a great week.
Since I can´t contact the chinese manufacturer for my radio ( they are right now on spring holidays till Feb 6th ),
Does anyone have an idea on were to get hands on a Firmware to update this radio?
I was trying to install OBDLink LX but the bluetooth was unable to pair ...and after many tests I lost the Bluetooth now .
BT seems present but unbale to detect any device in range
Android 7.1.1 system
CPU: T3 1.6GHz Cortex A7 Quad-core
2G /32G
Tuner: TEA6851
MCU : VW(8012) (t5.3.19, CONFIG, RDS; BC6, color, NODVD, Rohm 37XXX, TDA7786)
MCU version: T5 3.19 - 158-10-A46101-181110-8012
System Version: V8.3.2_20181108.155658_TW2-FY1
Thanks a lot. Any help much appreciated.
Hello, since I updated the Waze and Coyote apps, these no longer work. I have already done:
-Close the app,
-Clear cache,
-Delete data,
-Uninstall the app,
-Download an old version on Aptoide (the one that was still opening),
-Restart Android Head Unit,
-Update Android System Webview.
But it still doesn't work... The apps want to launch but they spit!! There are only these 2 applications that do not work! Thank you kindly help me
These applications are very important when I drive !!
Hi, the issue is in the latest Android WebView and Chrome update. Uninstall and disable the update. Read the last three pages:
[ROM][PX5][PX6][PX30][Q][10] Hal9k Mod v5 for MTCx/HCTx head units with Android 10/9/8/6
Hal9k Mod v5 based on Android 10 for MTCx HCTx Rockchip PX5 (rk3368), PX6 (rk3399) and PX30 (rk3326) head units Compatible MCU versions: MTCD_XXXX, MTCE_XXXX, MTCP_XXXX, MTCH_XXXX, HCTG_XXXX Firmware version: 5.0.0 (31.07.2021) Version of the...
forum.xda-developers.com
Pavel-71 said:
Hi, the issue is in the latest Android WebView and Chrome update. Uninstall and disable the update. Read the last three pages:
[ROM][PX5][PX6][PX30][Q][10] Hal9k Mod v5 for MTCx/HCTx head units with Android 10/9/8/6
Hal9k Mod v5 based on Android 10 for MTCx HCTx Rockchip PX5 (rk3368), PX6 (rk3399) and PX30 (rk3326) head units Compatible MCU versions: MTCD_XXXX, MTCE_XXXX, MTCP_XXXX, MTCH_XXXX, HCTG_XXXX Firmware version: 5.0.0 (31.07.2021) Version of the...
forum.xda-developers.com
Click to expand...
Click to collapse
Tkx a lot !
I just downgrade Webview before 100.xx.x. Not Chrome and it's work !!
Do you know why the lasted version of Webview causes the crash of other app ?
Unfortunately, I do not have such knowledge. Wait for the next update, it may fix the bug.
Pavel-71 said:
Unfortunately, I do not have such knowledge. Wait for the next update, it may fix the bug.
Click to expand...
Click to collapse
Ok !
For me, downgrading the version also helped, after all, the waze works fine. Thanks for the help
Hey. I downgraded my webview but waze is still crashing every after i turn off my car. Can you help me please? I’m getting crazy