Hi People,
I'm after firmware 6.0/MPI24.65-39-4/3 for Moto E XT1521 (2nd Gen LTE). Can anyone help?
I've tried the latest firmware I can find - 6.0/MPI24.65-39, that's without the trailing "-4/3" - from commonly available file "XT1521_SURNIA_RETASIA_DS_6.0_MPI24.65-39_cid7_subsidy-DEFAULT_CFC.xml.zip" but when running "fastboot flash partition gpt.bin" I get this error "(bootloader) Preflash validation failed".
The phone just locks up after the lengthy blue and yellow needle and thread Motorola logo performance, apparently due to full filesystem. The phone has been factory reset and wiped - with all the recovery options, the boot loader has never been unlocked, and factory unlocking with "fastboot oem unlock MyUniqueCodeFromMotorola" gives an error ""(bootloader) Check 'Allow OEM Unlock' in Developer Options."". It seems a copy of 6.0/MPI24.65-39-4/3 firmware, or later, is by best option, but I'm open to other suggestions/corrections?
Attached are the fastboot and recovery screens.
Any help, especially firmware 6.0/MPI24.65-39-4/3 would be much appreciated.
Cheers!
Rob
Related
Hi, My moto g is stuck in bootloop (Kood/Telus version). I tried flashing stock firmware (telus) and it gave me no errors so its all good but other version firmwares like us version did give me errors! I manage to relock my phone using fastboot oem lock however, it is still stuck in bootloop. I'm not sure what else to do.
I've found a stock firmware that works for me without any errors now what would be the next step to fix my bootloop. As flashing to stock did not help. It shows warning bootloader unlocked then goes to a lighted blackscreen and repeats. I am able to get into fastboot menu. but neither factory or recovery work.
The Firmware that works without error is :
Code:
TELUS-CA_FALCON_KXB20.9-1.10-1.39_cid14_CFC_1FF.xml
Thanks!
Are you following this tutorial?
http://forum.xda-developers.com/showthread.php?t=2542219
Are you entering the commands manually? Are you using fastboot or mfastboot?
Guys... I've a moto e 2015 xt1521...some days before I unlocked my bootloader...and then I rooted it...but it was having some problem...so I locked the bootloader and then too I was able to flash my stock firmware...but now I am stuck in bfastboot menu...I can open my stock recovery...but I am not able to switch on my phone...and em also not able to flash the stock firmware now...it says...(bootloader) Preflash validation failed..
I can't unlock my bootloader as I've forgot to enable "allow oem unlock option" .....can anyone help...please...
My problems concerns a Moto E 2015, but I think it could also occur on a Moto G 2015. I hope someone has experience with a situation like I have.. The phone is in a state where I can't accomplish anything
I think I bricked my Moto E 2015 (XT1524) yesterday. I tried to go to stock from cm13, every factory flash I did resulted in a "unlock bootloader" screen bootloop (tried stock 5.0.2, 5.1.1 retail europe). Then in a brainfart moment I locked my bootloader while a (bootloop causing) 5.1.1 rom was installed. This caused that I am only able to flash that particular 5.1.1 rom, otherwise I get a "preflash validation failed". The problem is that this 5.1.1 rom is not working so I can't boot and configure OEM unlock. I am also not able to flash another factory image, since it is blocked by the bootloader. I think I am out of options? I tried flashing the 5.1.1 rom according to the instructions (http://forum.xda-developers.com/moto...mware-t3044936). The 5.1.1 rom I am refering to is called:
XT1524_SURNIA_RETEU_5.1.1_LPI23.72-66_cid7_subsidy-DEFAULT_CFC_.xml.zip
With my current bootloader it seems that this rom is the only one I can flash... Is my phone bricked?
edit: I forgot to mention, I can only boot into fastboot mode, no twrp recovery nor stock recovery (I can flash it to the phone though). It just immedeately boots into fastboot mode (i see a short flash of the "bootloader unlocked" warning, then fastboot).
I have moto g xt-1033 running on android lollipop 5.1. Today when I'm trying to unlock my bootloader, I faced a problem. There showed an error saying "failed to erase partition, general unlock failure, oem unlock failure". But when i tried it again, it said it is already unlocked. I'm getting unlocked warning message while booting. Now I'm trying to root it using chainfire auto root. When I'm running the root-windows.bat file, command prompt is asking me to enter any key to continue and then nothing is happening. Phone is showing some messages like "cmd: oem unlock","cmd: oem unlock","cmd: oem unlock-go","cmd: oem unlock-go","cmd: flashing unlock". Then it is not moving. Please help me.
Can you post the screen shot of command prompt response ?
Did you get the unlock key from Motorola ?
Regards
Janardhan TS
sent from Mi
prasadbulusu said:
I have moto g xt-1033 running on android lollipop 5.1. Today when I'm trying to unlock my bootloader, I faced a problem. There showed an error saying "failed to erase partition, general unlock failure, oem unlock failure". But when i tried it again, it said it is already unlocked. I'm getting unlocked warning message while booting. Now I'm trying to root it using chainfire auto root. When I'm running the root-windows.bat file, command prompt is asking me to enter any key to continue and then nothing is happening. Phone is showing some messages like "cmd: oem unlock","cmd: oem unlock","cmd: oem unlock-go","cmd: oem unlock-go","cmd: flashing unlock". Then it is not moving. Please help me.
Click to expand...
Click to collapse
Flash latest twrp recovery..
then flash su binary in twrp....
with this method u can easily root your moto g .....
I have a phone (Moto G8), I wanted to get rid of TWRP and I thought that just locking the bootloader will do it.
I only after saw that if you lock the bootloader with TWRP flashed you get into a boot-loop.
I found out that I can only use "fastboot boot" to boot into stuff because of the error stating: "Your device is corrupt. It can't be trusted and will not boot.".
Even if I go into the recovery mode the same error message would appear.
I know that by unlocking the bootloader I could get rid of that error but I don't have an unlocked bootloader and,
as most of you already know, after relocking the bootloader you need to enable OEM unlocking from developer options.
That was a huge problem since I couldn't access the phone at all besides the
bootloader, TWRP (although limited by the locked bootloader), and the default recovery.
That way I got into TWRP but I couldn't do much because of the locked bootloader.
Even if I had a full backup (which I didn't have) I couldn't do much.
I also tried downloading the full OTA image of an updated version of Android (I had Android 10 and I tried to go to Android 11)
to sideload but I couldn't find it. I found one but it was not a full OTA image (with bootloader, recovery, etc.) and I got an error message saying:
"Invalid zip verification signature" or something like that. Also, the error was happening at the start of the ADB sideload, I didn't know what else I could try.
So I have a question: Since I can use "fastboot boot" to bypass the error message,
is there maybe a bootable .img file that I can use to boot directly into the system and enable OEM unlocking?
Any help would be highly appreciated as well any other way to enable OEM unlocking through the bootloader or somehow ADB.