General [ROM] [OFFICIAL] [TB-J716F] ZUI_13.0.346 OTA update Chinese ROM - Lenovo P11

Hi everyone,
Here is the ZUI 13 OTA update for the Xiaoxin pad pro 2021 (TB-J716F):
Download
This has only been tested coming from ZUI_12.5.238 with locked bootloader.
I can't say if it works with unlocked bootloader or different version so try at your own risk.
Instructions:
1. Download file and put in the root of the tablet.
2. Rename "TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.238_ST_210824_to_TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108.zip" to "update.zip"
3. Press the 3 dots in OTA window and select "Use the install package update"
4. Install and enjoy!
Rooting is tested and working for this update, if you're interested check out this post by @tinybilbo
Credits to @tinybilbo for finding and sharing the update!
Update:
A patch just came out and can be found here:
Download
Changelog is unknown for now...

Cool. I'm currently on 12.6.238st and will try this.

Just be aware if you do this you will lose play store certification (for now) I presume Lenovo will pass this version to Google for certification eventually.
There is another report on here that they updated to the latest version of the play store and was recertified but i'm on the one from 18.11.21 and no certification (28.0.33-19).
Widevine L1 intact.

I've just done the update on the first post. Google play now doesn't say "not certified" it doesn't say anything. However Netflix does not show up. I'm pretty sure before the update it said certified and if you searched for netflix it would show up.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Final update from me. Without doing anything netflix is now appearing on play store. Update gets a thumbs up from me.
Fake rounded edges gone.

Hello everyone, could you explain where I should put the update.zip. Should i need an SD card to update?

3001npct said:
Hello everyone, could you explain where I should put the update.zip. Should i need an SD card to update?
Click to expand...
Click to collapse
The download will likely be in downloads on your internal storage. Using a file explorer rename it to "update" then move it to the base folder (the one that contains all other file folders).

Can anyone please upload the files to a google drive or onedrive? I am unable to download it from mega as I have a free account and the size is too big. Thanks!

fabricioss1980 said:
Can anyone please upload the files to a google drive or onedrive? I am unable to download it from mega as I have a free account and the size is too big. Thanks!
Click to expand...
Click to collapse
Worked OK for me on a free account?

mardon85 said:
Worked OK for me on a free account?
Click to expand...
Click to collapse
I my case I have a transfer quota of 1.5GB

fabricioss1980 said:
I my case I have a transfer quota of 1.5GB
Click to expand...
Click to collapse
Erm that's odd. I wonder if you've downloaded something else from them this month?

mardon85 said:
Erm that's odd. I wonder if you've downloaded something else from them this month?
Click to expand...
Click to collapse
No, I rarely use it.

zxcv88 said:
Hi everyone,
Here is the ZUI 13 OTA update for the Xiaoxin pad pro 2021 (TB-J716F):
Download
This has only been tested coming from ZUI_12.5.238 with locked bootloader.
I can't say if it works with unlocked bootloader or different version so try at your own risk.
Instructions:
1. Download file and put in the root of the tablet.
2. Rename "TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_12.6.238_ST_210824_to_TB-J716F_CN_OPEN_USER_Q00209.3_R_ZUI_13.0.346_ST_211108.zip" to "update.zip"
3. Press the 3 dots in OTA window and select "Use the install package update"
4. Install and enjoy!
Rooting is tested and working for this update, if you're interested check out this post by @tinybilbo
Credits to @tinybilbo for finding and sharing the update!
Update:
A patch just came out and can be found here:
Download
Changelog is unknown for now...
Click to expand...
Click to collapse
thank you very much @zxcv88 both 2 ota work well now , can you show us how to get these ota file like that ? It seem that lenovo block OTA on some devices which is out side of china mainland ( device does not receive any update from system update UI)

luizkun said:
thank you very much @zxcv88 both 2 ota work well now , can you show us how to get these ota file like that ? It seem that lenovo block OTA on some devices which is out side of china mainland ( device does not receive any update from system update UI)
Click to expand...
Click to collapse
They were shared in a Wechat folder on the Chinese forum. We will post new updates here when they're shared.

Hi..when I got my p11 I had two updates waiting..won't this one come through either..in uk

I'm p
russy23 said:
Hi..when I got my p11 I had two updates waiting..won't this one come through either..in uk
Click to expand...
Click to collapse
It may do eventually? I'm UK based and it hasn't so far. The manual update went fine.

I've updated to zui13 with no issues. Any idea on how we can sideload the Lenovo one on a non Lenovo Android phone? I want to mirror my smartphone to my tablet.

iamian15 said:
I've updated to zui13 with no issues. Any idea on how we can sideload the Lenovo one on a non Lenovo Android phone? I want to mirror my smartphone to my tablet.
Click to expand...
Click to collapse
i think you can request some help from lenovo z6/z6pro threads , so they can help to extract lenovo one apk from their phone

mardon85 said:
I'm p
It may do eventually? I'm UK based and it hasn't so far. The manual update went fine.
Click to expand...
Click to collapse
Ok thanks..so just to be clear this is a whole new os update..
There the main file..then one minor update to install?

russy23 said:
Ok thanks..so just to be clear this is a whole new os update..
There the main file..then one minor update to install?
Click to expand...
Click to collapse
Correct yes. You keep all files and settings etc.

Related

Samsung Galaxy S4 (GT-I9500) is getting the Lollipop update in Russia

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Well, it looks like Samsung Russia is planning to update all the older flagships from the company to Lollipop ahead of newer devices. After the Galaxy Note 3, the Galaxy S4 has started receiving the Android 5.0.1 update in the country. The update is rolling out to the Exynos variant of the device (GT-I9500), and is rather huge at 1049MB. It looks like the update is so big that Samsung will be removing some pre-loaded apps like Google Play Books, Movies and others to make space. It’s likely only those apps that can be downloaded from the Play Store (and Galaxy Apps) will be removed, though this should not be taken as a sign of the bloatware trimming that Samsung is pursuing (as that will only take effect with the Galaxy S6.)
The update should bring all the features of Lollipop, like enhanced performance, lockscreen and heads-up notifications, and a redesigned interface, features that we exclusively previewed a couple of weeks ago. You should be seeing a notification for the OTA on your Galaxy S4 over the course of the next few days; the update doesn’t seem to be showing up on Kies just yet, but it hopefully will as a computer would certainly come in handy for downloading all that data.
http://www.sammobile.com/2015/01/30...500-is-getting-the-lollipop-update-in-russia/

			
				
It gives error on my phone when loading.
download link?
balbir_bs said:
download link?
Click to expand...
Click to collapse
It's OTA only currently. No full ROM package or Kies update is available yet. To get the OTA, you'll need to be on the latest Russia (SER) firmware (NJ1) with your device status as official. (No root!)
azengin said:
It gives error on my phone when loading.
Click to expand...
Click to collapse
See your available free memory.
azengin said:
It gives error on my phone when loading.
Click to expand...
Click to collapse
siddlv said:
See your available free memory.
Click to expand...
Click to collapse
Just finished downloading it, pulled the update.zip from my phone and WinRAR reports 'unexcepted end of archive' 'the archive is corrupted'
Wouldnt install through the OS, fails at 30%, and wouldn't install through recovery - apply update via external storage - gives error.
Waiting for official firmware release on sammobile
Sent from my GT-I9500 using XDA Premium 4 mobile app
Why ınstall OS fails at 30% ??
dave106 said:
Just finished downloading it, pulled the update.zip from my phone and WinRAR reports 'unexcepted end of archive' 'the archive is corrupted'
Wouldnt install through the OS, fails at 30%, and wouldn't install through recovery - apply update via external storage - gives error.
Click to expand...
Click to collapse
Maybe you just got a bad download? Try again.
FoxyDrew said:
Maybe you just got a bad download? Try again.
Click to expand...
Click to collapse
Downloaded 3 times. Failed 3 times.
Several others on the other thread had same result. If it was working before, then it isn't now!!
dave106 said:
Downloaded 3 times. Failed 3 times.
Several others on the other thread had same result. If it was working before, then it isn't now!!
Click to expand...
Click to collapse
Yes ı am try to twice download . Bu t setup is error when % 30. The russian 4.4.2 has got a multilanguage I am using turkish language maybe the new update its not support multi language and its error this resaults. Maybe
dave106 said:
Downloaded 3 times. Failed 3 times.
Several others on the other thread had same result. If it was working before, then it isn't now!!
Click to expand...
Click to collapse
jackalesk said:
Yes ı am try to twice download . Bu t setup is error when % 30. The russian 4.4.2 has got a multilanguage I am using turkish language maybe the new update its not support multi language and its error this resaults. Maybe
Click to expand...
Click to collapse
Maybe it is due to the Traffic Load !! give it some hours and try again
link download ?
Do you think I can just flash 4.4 Russian version via odin and ota update that way. I know I lose root but I can just root it after.
[email protected]
Simow.b said:
Maybe it is due to the Traffic Load !! give it some hours and try again
Click to expand...
Click to collapse
Are you seriously ? You believe it its impossible something is wrong but not download or file. I think samsung is wrong
Canadian version of the S4 (1337M) got update too
But i cant update without unrooting
nice thanks
bessian said:
Canadian version of the S4 (1337M) got update too
But i cant update without unrooting
Click to expand...
Click to collapse
Really?This is a Snapdragon variant isn't it?
I download the lastest russian version (SER) and then when i download the Lollipop via OTA, when im installing it it show me an error at 30%
i download it 3 times and the same error :crying:

[TOOL] Nokia 6 Utility (Playstore, Language and more)

With the July update, Nokia 6 fully supports Google Apps. But how to proceed? What do I need to install? Do not mind, with this simple and useful tool you will install the play store and you will be able to change system language in a few easy steps. I want to thank Mastmen Shop to give me the device to create this tool. Tht tool is basically in english and it is also translated in Italian.
Nokia 6 Utility Screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FUNCTIONS
Install Drivers
Install Playstore
Install Morelocale Pro (to Change System Language)
NOTE
I added a button "Delete File " in the case when downloading some files you have problems, you can delete the corrupted files directly from the tool instead of going to look for it manually.
If you have any problems during installation then first try to update the Microsoft Net freamwork to latest version:
https://www.microsoft.com/it-it/download/details.aspx?id=30653
HOW TO INSTALL
Download .zip file;
Right click on zip and go in file properties;
Set "Unblock", then click on "Apply" and "OK" (If you don't see it continue the installation guide). Guide picture:
Extract all its contents into a folder;
Click on setup.exe;
Click on "Install";
Waiting for the end of the process;
Enjoy your tool
UPDATE
There will be no need to re-download the new tool, but just look for new updates directly from the tool.
In all cases I'll update the link in this thread and report it when there are new updates with its changelog.
CHANGELOG
#1.0.0.1
- Install Drivers
- Install Playstore
- Install Morelocale Pro to change language
- Recognize if your phone is connected
DOWNLOAD
Nokia 6 Utility
DONATE LINK
If you want to support the project please consider making a donation, thanks.
​
Now if you just add root then you've got the holy trinity, well, as long as there is a custom recovery (TWRP) too....
ultramag69 said:
Now if you just add root then you've got the holy trinity, well, as long as there is a custom recovery (TWRP) too....
Click to expand...
Click to collapse
For now, the bootloader can't be unlocked, so there are no root possibility
Devs from the axon 7 root it whit out unlocking the bootloader so !
Sent from my SM-N900T using XDA-Developers Legacy app
tupirujp said:
Devs from the axon 7 root it whit out unlocking the bootloader so !
Sent from my SM-N900T using XDA-Developers Legacy app
Click to expand...
Click to collapse
Link?
tupirujp said:
Devs from the axon 7 root it whit out unlocking the bootloader so !
Sent from my SM-N900T using XDA-Developers Legacy app
Click to expand...
Click to collapse
Dev use OEM unlock command to unlock bootloader. This doesn't work on Nokia6.
Is Burmese supported by Morelocale Pro? Also, so you know if this will work on the US phones sold by Amazon?
Are you able to make a firmware backup or does that take more access than what you were able to do here?
aNorthernSoul said:
Are you able to make a firmware backup or does that take more access than what you were able to do here?
Click to expand...
Click to collapse
I made a system backup but it is not complete because we have not root access.
mauronofrio said:
I made a system backup but it is not complete because we have not root access.
Click to expand...
Click to collapse
Ah, ok. I wasn't sure if you needed root access just for a full firmware backup or not.
aNorthernSoul said:
Ah, ok. I wasn't sure if you needed root access just for a full firmware backup or not.
Click to expand...
Click to collapse
Yes root access is needed to make a full firmware backup
Keeping an eye on this thread in hopes of someone being able to unlock the bootloader and ROOT Just got my Amazon Nokia 6 and I too am impressed by the build quality. Not as fast as my current NEXUS 6 - but fast enough for what I need. Might keep or return the phone for a Sony Xperia XA1 Ultra (white).
Are you able to get the Amazon one in the 64GB of space and 4GB of RAM? I couldn't find it. That's the only reason I didn't go that route.
Apparently you can root it with Infinity Box Chinese Miracle 2.
aNorthernSoul said:
Are you able to get the Amazon one in the 64GB of space and 4GB of RAM? I couldn't find it. That's the only reason I didn't go that route.
Apparently you can root it with Infinity Box Chinese Miracle 2.
Click to expand...
Click to collapse
No the Amazon / Unlocked models sold through Amazon are only the 32GB / 3GB RAM North American models. I'm not familiar with the Infinity Box (had to Google it) and the capabilities. Is that the only way it can be rooted right now?
quailallstar said:
No the Amazon / Unlocked models sold through Amazon are only the 32GB / 3GB RAM North American models. I'm not familiar with the Infinity Box (had to Google it) and the capabilities. Is that the only way it can be rooted right now?
Click to expand...
Click to collapse
That's all I can find. And you cannot use the software without purchasing a dongle and the dongle needs to include the Chinese Miracle 2 addon. That's so crazy. I thought software dongles were done in the 90s.
mhill1986 said:
Is Burmese supported by Morelocale Pro? Also, so you know if this will work on the US phones sold by Amazon?
Click to expand...
Click to collapse
Yes, Unicode Myanmar can use.
Anybody using nokia 6 china model... I need music and video player apk file
mauronofrio said:
I made a system backup but it is not complete because we have not root access.
Click to expand...
Click to collapse
Can we unlock bootloader with the oem unlock in developper settings ?

[GUIDE] How to install Internal Android 10 Build for Nokia 9 PureView

If you want to repost this internal OTA to other websites (other than XDA itself), please ask me for permission, thanks.
Click to expand...
Click to collapse
Alright.
AOP-513D-0-00WW-B03 (V5.13D_B03) here is same to the official release. So if you have installed this build, just enjoy it.
You will get later updates like regular Nokia 9 Devices.
To those who are still running 5xxx builds older than 513D B03, please download packages here.
Click to expand...
Click to collapse
To users who have installed this internal build, please share your experience report here if you're willing to, thanks.
Now I think Android 10 for Nokia 9 is stable enough and will be released to public soon, so I think it's time to post it here.
If HMD will push Android 10 officially, you can install it under ADB sideload easily and link will be posted here.
Internal build version: AOP-513B-0-00WW-B01
It will be updated from: AOP-427F-0-00WW-B01, which is released October 2019 Security Update.
Let me tell you how to verify:
1. Dial *#*#227#*#* to check current Version. If older than AOP-427F-0-00WW-B01, update to 427F before proceed.
FYI, 427F is October 2019 Security Update.
Alternately, you can use command "fastboot oem getversions" under fastboot mode / Download mode to check current firmware version.
2. Install AOP-513A-0-00WW-B01-427F-0-00WW-B01-update.zip with adb sideload under recovery.
3. Reboot to normal OS and recovery again - it's not over yet.
4. Install AOP-513B-0-00WW-B01-513A-0-00WW-B01-update.zip with adb sideload under recovery.
5. Reboot your phone.
That's it.
If Android 10 official update pushed publicly, link will be updated here.
To root the phone, you may want to use Magisk 20 released October 12th, 2019 or newer. I've uploaded stock boot image here if you have unlocked bootloader. There's no "Flashing is not rooted for fused device" issue under 5xxx build.
You can check overall experiences here (prototype, though): https://www.youtube.com/watch?v=v6ScYgISGFg
Download link:
To prevent throttle error, I didn't upload them to Google Drive or other cloud storages. Sorry for inconvenience.
https://www.androidfilehost.com/?w=files&flid=300249
Just installed on my Nokia 9 TA-1087, works perfectly. No bugs found so far. So far so good. Animations really smooth, camera launch is significantly faster than Android 9. The dark mode is not fully dark but that was expected. Overall excellent experience. Definitely worth the update.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any tutorial for hpw to do that? And if something goes wrong how to flash stock pie again? Thnx
Ok done. Flashed... All working very well without bugs.
Battery life seems better on 10. There is no night mode on camera i hope add it to next updates...
can we use it in TA-1087?
Mod edit - Translated by Google Translate:
427F full package download address please provide trouble, thanks
*********************
427F全量包下载地址麻烦提供下,感谢啦
and the most serious.. do. we need to unlock bootloader?
Sent from my Nokia 9 using Tapatalk
ktlk21 said:
and the most serious.. do. we need to unlock bootloader?
Sent from my Nokia 9 using Tapatalk
Click to expand...
Click to collapse
No need to unlock bootloader or root
and when we want to go back to stable channel? what happens?
Sent from my Nokia 9 using Tapatalk
Google pay works but can't add new cards as it says it's been rooted or altered in some way. I know it's not rooted but will we not get the proper update now as a result of doing this?
I installed the internal build 10 update on my TA-1082 (US) last night (about 20 hours ago) and it's been working/behaving extremely stable.
Feels noticeably faster than 9.
Thanks to OP for making it available:good:
Hi there! Is the device certified or not after installing this software version? I'm thinking, if not, maybe the mobile banking apps won't work on it
I installed it a while ago and it seems pretty stable and fast, the face recognition doesn't work as well tho. Also its a shame when you switch the dark theme on it doesn't make the boot dark as well, like the pixels. Everything else is working great! Thanks for sharing the build :good:
PS: I didn't have to root or anything, I just downloaded the two builds and updated using the stock recovery via adb sideload, it works on a non rooted fully stock phone, which is awesome
Any idea if there is possibility to revert back to stock ROM? I found only nb0 firmwares that seems is not able to flash to Nokia 9 with Nokia flash took.
Thanks.
Thank you! I am on it now...
---------- Post added at 05:31 PM ---------- Previous post was at 05:27 PM ----------
How can I flash it into the recovery? If I boot on the recovery via adb I have "No Command" menu... what should I flash before?
Thanks!!!
sev7en said:
How can I flash it into the recovery? If I boot on the recovery via adb I have "No Command" menu...
Thanks!!!
Click to expand...
Click to collapse
Check out steps in this article-
https://www.techmesto.com/recovery-and-download-mode-in-nokia/
graphreak said:
Check out steps in this article-
https://www.techmesto.com/recovery-and-download-mode-in-nokia/
Click to expand...
Click to collapse
Thank you, I guess my model is not compatible as when I sideload I get that error:
"Package is for product AOP_sprout but expeced fih_sdm845"
I have the single sim edition available from UAE.
There is any OTA for that?
Cheers,
sev7en said:
Thank you, I guess my model is not compatible as when I sideload I get that error:
"Package is for product AOP_sprout but expeced fih_sdm845"
I have the single sim edition available from UAE.
There is any OTA for that?
Cheers,
Click to expand...
Click to collapse
Not aware of any OTA available for UAE model.
It is the Nokia 9 Pureview? What's the Model Number?
Mine is a single SIM too but, for US/North America with Model number TA-1082.
graphreak said:
Not aware of any OTA available for UAE model.
It is the Nokia 9 Pureview? What's the Model Number?
Mine is a single SIM too but, for US/North America with Model number TA-1082.
Click to expand...
Click to collapse
Hello,
my model is TA-1082, single sim. I purchased it in Dubai... but when I flash for the OTA upgrade, it shows the message as above. Why?
EDIT: My build number is: 00WW_4_27D_SP02
Feedback of issues I have gotten so far:
- Phone freezes when playing videos.
- Network connectivity drops to nothing randomly.
- Google Pay doesn't work without internet.
Feedback on improvements:
- Phone faster and more responsive.
- Better battery life after a week.
Is anyone having these issues or is it just me, and also how do we return to stock rom in case something goes bad? I haven't unlocked the bootloader or rooted the phone so I'm unaware on how to do this just in case.

Question [CLOSED] help me install rom global black shark 4

Hi everybody. i am using black shark 4 chinese version. I want to convert it to the global version, where should I download it and how to install it. Thank you
283.13 MB file on MEGA
mega.nz
That is the Global ROM
Download Xiaomi Flash Tool 20210226 - Official Tool
Download the Official and Tested version of Xiaomi Flash Tool, i.e., Xiaomi Flash Tool 20210226 which allows you to Flash Stock Firmware on Xiaomi Devices.
xiaomiflashtool.com
MiFlash Tool
thank you. I am a new user can you please give me the detailed way to install it. and what to do with my phone and what to do with my computer. thank Bro
Well nvm try using that zip and putting it in the updater app in ur phone.
In the 3 dots you can click choose update package
Yes. thank you my phone is china rom can also do it. and if so, do it directly on the phone without using miflash on the computer?
Kenora_I said:
Well nvm try using that zip and putting it in the updater app in ur phone.
In the 3 dots you can click choose update package
Click to expand...
Click to collapse
I'm Vietnamese, can you help me see if the installation is in Vietnamese language? thank you
Oh, um its just an app the update app check that in settings.
Eh, the bootloader is locked seems like, until someone comes to unlocking that we cant interchange the roms, sry.
Kenora_I said:
Eh, the bootloader is locked seems like, until someone comes to unlocking that we cant interchange the roms, sry.
Click to expand...
Click to collapse
Can you help me with step by step instructions. thank you
nguyenvancanhno1 said:
Can you help me with step by step instructions. thank you
Click to expand...
Click to collapse
Download the OTA Package above.
Then check for updates in the updater app.
If the updater app finds an update download it but don't install it.
Go to files and find the downloaded OTA package.
Replace the OTA package in the ota_package folder with the new one ive linked above (CHANGE THE NAME OF THE OTA PACKAGE IVE SENT YOU EXACTKY TO THE ONE THAT IS LOCATED IN OTA_PACKAGE FOLDER)
After replacing the file, then go to the updater app again and install it.
This is a theorized method, I am not responsible for any errors that occur and this method is made from other similar XDA posts.
Kenora_I said:
Download the OTA Package above.
Then check for updates in the updater app.
If the updater app finds an update download it but don't install it.
Go to files and find the downloaded OTA package.
Replace the OTA package in the ota_package folder with the new one ive linked above (CHANGE THE NAME OF THE OTA PACKAGE IVE SENT YOU EXACTKY TO THE ONE THAT IS LOCATED IN OTA_PACKAGE FOLDER)
After replacing the file, then go to the updater app again and install it.
This is a theorized method, I am not responsible for any errors that occur and this method is made from other similar XDA posts.
Click to expand...
Click to collapse
thanks bro
No problem, but please note, I am not your ‘bro’ specifically.
Is it necessary to unlock bootloader?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kenora_I said:
What?
Click to expand...
Click to collapse
it won't work lol cause it just auto install it u wouldn't even have a chance to replace the file, even if u did it is gonna, say hey I detected that ur file r broken then me fix for u then it just restarted the downloading process lol, cause i tried i even rename the file tried to cheat over the system it still won't work
jeff880814 said:
it won't work lol cause it just auto install it u wouldn't even have a chance to replace the file, even if u did it is gonna, say hey I detected that ur file r broken then me fix for u then it just restarted the downloading process lol, cause i tried i even rename the file tried to cheat over the system it still won't work
Click to expand...
Click to collapse
I have the same, i want to flash my rom to the chinese version but i cant, some one can help?
nilzwsx said:
I have the same, i want to flash my rom to the chinese version but i cant, some one can help?
Click to expand...
Click to collapse
i mean chinese rom is not that bad after all i had been using for a couple days now and it seems like , working just fine, except for some app it can't be used or games such as guardian tales
jeff880814 said:
i mean chinese rom is not that bad after all i had been using for a couple days now and it seems like , working just fine, except for some app it can't be used or games such as guardian tales
Click to expand...
Click to collapse
I want to change to chinese rom, im in global version but it has a lot of bugs. i´ve always prefered the original rom, but when i bought my black shark 4 it has global rom. I want to change it but i don´t know how.
nilzwsx said:
I want to change to chinese rom, im in global version but it has a lot of bugs. i´ve always prefered the original rom, but when i bought my black shark 4 it has global rom. I want to change it but i don´t know how.
Click to expand...
Click to collapse
It's sad NEWS, but no one has been able to do it for 4-5 months since the release of the Chinese version in March and the release of the global version in April.
HOW TO is from blackshark3.

General (Global ROM) Update tracker

Nubia did release the global ROM on the site: https://help.redmagic.gg/hc/en-us/articles/6360319907865-REDMAGIC-7-Pro
UPDATED AND ADDED FEATURES
REDMAGIC 7 Pro update log:
V412 Europe
V312 North America & Asia
Tips
The upgrade process will not interrupt the use of your mobile phone. After completion, you need to manually restart the mobile phone to update to the current version.
System
Optimization: Improved translation experience
Optimization: Google security patch update
Game
Fix: low probability splash screen problem of PUBG
Fix: low probability login flashback problem of Garena
Communication
Optimization: communication network experience
Fix: Probabilistically not displaying the contact name in the address book when making a call
Other
Optimization: Screen brightness experience
Optimization: Face unlock experience in some scenarios
The optimized content of this update includes but is not limited to the items listed above
I'm still wondering how to flssh Red Magic 7 pro CN Rom to Global rom
Andi.soetiono said:
I'm still wondering how to flssh Red Magic 7 pro CN Rom to Global rom
Click to expand...
Click to collapse
I think i was download the file and put it on the phone and do local update. But i won't recommend to do that because global software has alot of bugs and update rate is lower. Just install Gapps on CH rom should be better.
Koudy69 said:
I think i was download the file and put it on the phone and do local update. But i won't recommend to do that because global software has alot of bugs and update rate is lower. Just install Gapps on CH rom should be better.
Click to expand...
Click to collapse
Already do that,but no luck, cannot install
Andi.soetiono said:
Already do that,but no luck, cannot install
Click to expand...
Click to collapse
Hmm weird try ask someone on Reddit maybe they can help you.
I have a chinese rom on my transformers edition 7 pro. I also have been wanting to manually update to the global rom with no success. I get a signature error when i try to do it manually. Does anyone know if theres a way to do this through recovery? Is anyone working on TWRP recovery?
CUKIO34 said:
I have a chinese rom on my transformers edition 7 pro. I also have been wanting to manually update to the global rom with no success. I get a signature error when i try to do it manually. Does anyone know if theres a way to do this through recovery? Is anyone working on TWRP recovery?
Click to expand...
Click to collapse
I bought the Global version but about TWRP i haven't seen yet someone installing it successfully.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
New Ota Update rolling out for global version V4.14 / V3.14
Hi
Can I update my actual rooted v4.12 to the official v4.14 ?
Marcis-2k said:
Hi
Can I update my actual rooted v4.12 to the official v4.14 ?
Click to expand...
Click to collapse
You will lose root acces and maybe a risk of bricking device.
UPDATED AND ADDED FEATURES
REDMAGIC 7 Pro update log:
V414/V314
Tips
The upgrade process will not interrupt your normal use, and you need to manually reboot the phone to apply the update.
System
Optimization: stability and performance improvement
Optimization: translation experience
Other
Optimization: Screen brightness experience
Optimization: Face unlock experience in some scenarios
Red Magic Studio
The optimized content of this update includes but is not limited to the items listed above
Link: https://help.redmagic.gg/hc/en-us/articles/6360319907865-REDMAGIC-7-Pro
Koudy69 said:
You will lose root acces and maybe a risk of bricking device.
Click to expand...
Click to collapse
Until now I don't have the possibility to update my device after rooting without risking of bricking my device ?
I got the chinese edition red magic 7 pro to update to global rom. I will be posting a tutorial in a new thread soon.
Marcis-2k said:
Until now I don't have the possibility to update my device after rooting without risking of bricking my device ?
Click to expand...
Click to collapse
1. You need download a rom from nubia website for your phone. Example UN/EU...
2. Go to setting/system update/ three dot on right top and choose local update (you need turn off your wifi and mobile data) to choose local update
3. Choose rom you have downloaded and install
4. Now you have updated rom but lost of root, you need re root again by patched boot img of new rom(magisk) and flash it, and recalibrate fingerprint
Seyren Windsor said:
1. You need download a rom from nubia website for your phone. Example UN/EU...
2. Go to setting/system update/ three dot on right top and choose local update (you need turn off your wifi and mobile data) to choose local update
3. Choose rom you have downloaded and install
4. Now you have updated rom but lost of root, you need re root again by patched boot img of new rom(magisk) and flash it, and recalibrate fingerprint
Click to expand...
Click to collapse
Ok thank you
Need help something updated on phone I believe it was Google play store or something Google related device showed reboot to complete update so I rebooted and it hasn't turned on since it just freezes on boot logo after boot animation and if left on device starts to get extremely hot device redmagic 7pro only 2-3days old haven't done anything to device actually was still trying to get sim card and service to work consistently
Update V4.17 is rolling out for the European version.
For USA and Asia version V3.17 already rolled out last week.
https://help.redmagic.gg/hc/en-us/articles/6360319907865-REDMAGIC-7-Pro
V4.19 rolling out in Europe
Updates Redmagic OS to V5.5
Koudy69 said:
V4.19 rolling out in Europe
Updates Redmagic OS to V5.5
View attachment 5740339
Click to expand...
Click to collapse
Want to ask if EU version is better than USA & asia? I live in Asia but was pre-Installed with EU. Should i change it?
imNazreen said:
Want to ask if EU version is better than USA & asia? I live in Asia but was pre-Installed with EU. Should i change it?
Click to expand...
Click to collapse
Its the same.

Categories

Resources