Might be a few stupid questions, but here it goes.
I'm trying to get native call recording by changing the region on my Find X2 Pro. I'm currently running on Android 11 version C72 in UK
Code:
[ro.vendor.oplus.euex.country]: [GB]
[ro.vendor.oplus.market.name]: [OPPO Find X2 Pro]
[ro.vendor.oplus.operator]: [EE]
[ro.vendor.oplus.regionmark]: [EUEX]
[ro.vendor.oppo.exp.version]: [CPH2025EE_11_C.72]
The current guide for switching region doesn't work as the code to access the regions doesn't work anymore (past version C.61, I think). Tried also some roll back firmware's I found online, but don't work.
So, my questions are:
1. If I do a factory reset, will the phone revert to the Android version the phone came with (Android 10 ColorOS 7.0) or will is stay on Android 11 C.72 with all the data wiped.
2. If I do a factory reset and it stays on Android 11 C.72, and take the sim out, do not connect to wifi (without wifi I know I won't be able to connect with a google account to restore apps, I will just skip), and in the setup I select a region that supports call recording (like Singapore) and after I finish the setup put in the sim, will I have native call recording, theme store and any other goodies that have been removed in the EU/UK market?
May I ask how did you find this info about your device?
Related
Hello all and thanks for reading. I am hoping I can get some guidance and some sort of solution.
Long story short while in China I purchased a Y511-T00 instead of a Y511-U00. The first issue was upon returning home i realized I had no 3G. That I can live with using a MiFI device.
The problem I am facing is the Rom is laggy and it seems to be a half baked rom that was ported perhaps so the phone would be in english.
Facebook, Twitter and LinkedIn do not stay logged in when I restart.
Launcher sometimes freezes or goes blank for about 5-10 seconds
Contacts dont always show with a number immediately.
I am desperately in search of a Stock Rom with the regular Huawei Emotion UI or any other rom that may be more stable and user friendly. Any assistance would be greatly appreciated.
Alternatively does anyone know if i can use the U00 firmware on a T00 phone? I am worried I may brick the device if I start doing trial and error.
My phone details are as follows
Model Number : HUAWEI Y511-T00 (China Mobile)
Android version : 4.2.2
Baseband version MOLY.WR8.W1319.MD.TG.MP.V4.P18 , 2013/07/31 15:37
Kernel Version 3.4.5
Build Number : Y511-U30V100R001C328B120
Hardware version : VER.A
ZWstyles said:
Hello all and thanks for reading. I am hoping I can get some guidance and some sort of solution.
Long story short while in China I purchased a Y511-T00 instead of a Y511-U00. The first issue was upon returning home i realized I had no 3G. That I can live with using a MiFI device.
The problem I am facing is the Rom is laggy and it seems to be a half baked rom that was ported perhaps so the phone would be in english.
Facebook, Twitter and LinkedIn do not stay logged in when I restart.
Launcher sometimes freezes or goes blank for about 5-10 seconds
Contacts dont always show with a number immediately.
I am desperately in search of a Stock Rom with the regular Huawei Emotion UI or any other rom that may be more stable and user friendly. Any assistance would be greatly appreciated.
Alternatively does anyone know if i can use the U00 firmware on a T00 phone? I am worried I may brick the device if I start doing trial and error.
My phone details are as follows
Model Number : HUAWEI Y511-T00 (China Mobile)
Android version : 4.2.2
Baseband version MOLY.WR8.W1319.MD.TG.MP.V4.P18 , 2013/07/31 15:37
Kernel Version 3.4.5
Build Number : Y511-U30V100R001C328B120
Hardware version : VER.A
Click to expand...
Click to collapse
Anyone have any idea? I tried using google launcher but it tells me that I already have a default launcher and yet in applications there is no default set and the button is greyed out.
anyone idea please?
have the same phone which is rooted & I know of some stock ROMs which can be flashed with HiSuite.
I am a bit confused about what ROM you are running now, is it modded ?
I'll take a look at the build number you have specified and see what matches.
This phone is very low end Huawei.
Curious: What is the Build date ? (at bottom of about phone)
Well I have a copy of this ROM on my PC & it matches the Build Number (see screenshot) of what I have on my phone now.
It's stock but contains root too, so I have read. However I actually have not flashed my phone with this ROM.
It runs OK, some system messages still show in Chinese, but those are rare.
I rooted mine via an alternate method, I plan to slowly do some more tweaks when I have time
The ROM is around 270 Mb & another chopped version down I have is about 180 Mb
I cant see why you cant get 3G network, I am in Mainland China and have no real issues here, hope it works in Australia when I visit there.
With root I am sure you could tweak this.
My HuaWei USB 3g USB card works fine in Oz & China.
The primary use of this phone for me is to supply my 10" Tab 3 with 3G via WiFi.
Solution finally
After about 12 hours or so of trying different rom's namely u30 rom's including custom roms like Lewa Os. i realised that everytime my baseband would come up as unknown.
I finally used HUAWEI-Y511-T00 flash with SP Flash Tool to flash a basic T00 rom with no bloatware whatsoever just the core android apps.
I then used ES File, Framaroot and the South African system.img . I extracted all of the APK files from the system.img from the U30 rom and copied them one by one setting permissions to read, write - read - read for each Apk. I did a dalvic wipe and a cache wipe and restarted.
The end result is I know have Google Apps (the ones that I wanted) running perfectly with sync etc across all apps and my china mobile Y511-T00 now behaves like a normal y511-U00.
Points to note, you will need to backup your NVRAM so you can restore your imei and mac ID to get rid of the Warning NVRAM error. You will also need to write your original IMEI back use MKTdroid tools.
Custom rom's will not work, but I have set google launcher as my launcher and removed the regular launcher which I am happy with.
What ever you do, make sure you make a back up. The only thing I have not fixed is the startup animation and logo which i can live with. For UMTS / 3G I am using a mifi device that gives me 8 hours on the go but i barely need 3g as i use wifi more than anyting at home and office.
@ZWstyles
Yeah nice you have it sorted.
Still surprised you cant make use of 3G network natively in the phone do you have any ideas on that ?
I have a G8142 HK version (on Oreo). I am visiting mainland China and I found out there is a 'x' on WIFI signal (I guess it is because of blocking Google). The guy who sold me the phone flashed the oem_x.sin file of the Chinese ROM - in order for me to use VOLTE on China Unicom (I've activated the service with them).
And I fount out:
1. too many Chinese bloatwares e.g. baidu, weibo etc. - gone with flashing HK file, good!
2. the 'x' on the wifi signal is gone - and did not come back after I flashed the HK file (I want it to be there to show there is the Great Firewall, if I go somewhere which has free internet so I can see from the WIFI x)
3.there is still no VOLTE in settings-mobile network - as I go into testing mode (*#*#4636#*#*) the VOLTE provision option is still greyed out. I also found out in HK rom the video calling provisioned option is available but after flashing Chinese file it is greyed out(came back again after I flashed HK version of file).
So I'd like to ask:
1. is it possible to bring back the WIFI 'x' just like before? (Or return to stock)
2. anyone know why there is no VOLTE option?
3. Where do I get the official firmware? - I got the version G8142_HK_47.1.A.3.254 from the phone seller, but I'd like to know where to download them? Tried Xperifirm.exe many times it always stops downloading halfway, and also Xperia companion but the loading bar stucks at the beginning, maybe it has something to do with Chinese internet censorship?
4. while I am in China, before I flash a new firmware I'll have to delete my google account because when the setup menu comes it will ask me to put in my old google account to proceed, I heard it from somewhere, right? If yes I'll just wait for a week maybe flash it after I leave China...
Sorry to write so long. First time using a Sony phone...
1: use flashtool
2: yes through magisk module or use the rom turbo created. (module just adds the options if your phone has it on there, it does not engage volte, only the menu)
3: did you try flashtool?
4: flashed multiple roms on my xzp and not once has it asked me for the old account.
I switched to Vodafone recently, and after inserting my new SIM into the phone, Vodafone apps appeared automatically.
I know also discover that in the 'System -> About Phone' there is now a 'custom version' listed as VDF.xxxx.
I also can't register for the beta program and I also can't scan for the new v10 release.
How can I 'unbrand' my ROM to be back to a normal unlocked one (as it was and as I bought it). Is it possible to flash a stock version over it and start again? Or even flash v10 'stock' directly on top of it ?
dipje said:
I switched to Vodafone recently, and after inserting my new SIM into the phone, Vodafone apps appeared automatically.
I know also discover that in the 'System -> About Phone' there is now a 'custom version' listed as VDF.xxxx.
I also can't register for the beta program and I also can't scan for the new v10 release.
How can I 'unbrand' my ROM to be back to a normal unlocked one (as it was and as I bought it). Is it possible to flash a stock version over it and start again? Or even flash v10 'stock' directly on top of it ?
Click to expand...
Click to collapse
Forget the beta, stable is rolling out now
You will receive an update to the vodofone branding when you insert your vodafone sim, nothing you can do about that, only way you can get back to clean stock is remove sim and factory reset, but it will happen again once you insert the sim
No stock 10 to flash, wait for OTA
*Detection* said:
Forget the beta, stable is rolling out now
You will receive an update to the vodofone branding when you insert your vodafone sim, nothing you can do about that, only way you can get back to clean stock is remove sim and factory reset, but it will happen again once you insert the sim
No stock 10 to flash, wait for OTA
Click to expand...
Click to collapse
Since I can't find any stock firmware for my C431R2 - and I don't dare to flash any other variant - I'm kinda stuck. I don't even want v10 right now, I just want to loose the Vodafone branding.. maybe I'll go to a Vodafone store and force them to undo it.
Will a factory reset clear the branding? Since it's labeled as firmware I'm kinda afraid it will survive a factory reset .
If a factory reset works, I can just ignore the Carrier-update, right ?
Same issue with Altice in France...
Luckily I disabled auto-install over night before it installs, but it is downloaded and I can't find where to delete the file... I guess it is not possible.
I didn't reboot my phone for a whole month, scared that it might install the custom ROM.
But I start to believe that if I don't install it first, I won't get v10....
not sure if I should remove SIM card > reboot > install v10 when available, or just can't do anything and have to install the custom rom if I want further updates
I'm so glad my Telco (Telstra) doesn't push these updates, I don't think you can remove them easily apart for factory resetting but what I would do is:
turn off phone > remove sim > connect to hisuite > backup > then reset to factory through hisuite > update through hisuite > restore backup in hisuite > insert sim.
But this seems like a pain on the ass to do every update and it's probably best to just not use companies that push carrier updates.
Hello!. I have a P30 from Claro operator (I'm from Colombia) and I would like to know if you can flash to a global firmware without having to unlock the bootloader. The operator firmware bothers me a lot because it doesn't update often.
brandox0 said:
Hello!. I have a P30 from Claro operator (I'm from Colombia) and I would like to know if you can flash to a global firmware without having to unlock the bootloader. The operator firmware bothers me a lot because it doesn't update often.
Click to expand...
Click to collapse
Have you tried to factory reset without any simcard? or even factory reset and update via hisuite?, if it did remove claro updates it would probably install them again when reinserting sim but you can just turn off auto updates in developer settings under "Automatic system updates" (https://androidcure.com/huawei-p20-enable-developer-options-usb-debugging/).
In regards to flashing firmware you may be able to use usb-otg method (https://forum.xda-developers.com/huawei-p30-pro/how-to/help-please-change-firmware-o2-phone-t3999837) and (https://forum.xda-developers.com/hu...orial-vog-l29-flash-firmware-153-usb-t3928793)
Flashing the global rom over your rom may brick your phone and I would try a similar firmware to your current one before trying the global firmware.
Using HiSuite, I managed updating to v9.1.0.240 and ignoring the custom update. I think v10 will be installable just the same way without the custom version soon.
But from the smartphone update system, it still shows me the downloaded custom v9.1.0.1.
So I need to get my hands on the FullOTA version of v10 for my model so I can actually try flashing it.
But I can't even find any v9. 1 FullOTA version for my rom, let alone v10.
Only on that paid firmware download site, but it sounds very sketchy and bogus to be paying 17 dollars for a download (if they actually deliver)
Wanted to know if you can downgrade Android 13 to Android 12 for the unlocked Flip 4 version. Reason is below.
Updated to Android 13 on the Flip 4 and I find that it loses some options on Sim Card Manager. On Android 12 it has 3 options when you want to add ESIM
1) Scan QR code from service provider
2)Transfer Esim from another device
3) Recover deleted Esim
On android 13 only option 1 remains. I need option 2 because that is the only one that will allow you to add multiple ESIM from the same carrier.
EDIT: Please ignore this thread. Turns out the reason the Esim option is gone is because I have a different physical carrier sim in there and when it updated to Android 13 the Esim options is gone too.
Have you use option #2 before? Usually these QR code for eSIM is for one time use, you will need to get new one from provider when switch phone.
I did try to do fresh install from ODIN from A13 beta back to A12. Have not try from official A13 to A12 though.
krusir said:
Have you use option #2 before? Usually these QR code for eSIM is for one time use, you will need to get new one from provider when switch phone.
I did try to do fresh install from ODIN from A13 beta back to A12. Have not try from official A13 to A12 though.
Click to expand...
Click to collapse
Yes I have used option 2 multiple times. Option 2 does not require QR code. That may be reason why it allows to add 2+ esim from same carrier.
Thread closed on request of OP @whatsitsnamenow
Hello,
I'm on the kb2005 and i don't have any options for wifi calling, volte or LTE.
I'm on OOS 13.1 in Canada.
Before i upgrade my phone, what options do i have? What am I doing wrong?
I have the same issue on my KB2003 since 13.1. No wi-fi or incoming/outgoing calls on either SIM. Had to put my SIMs in other phones before factory resetting which accomplished nothing.
I need to downgrade to 13.0 or try a different variety of 13.1. It does not appear, based on posts, to be a widely experienced problem.
If you have found a solution, please share.
You might want to try this: https://forum.xda-developers.com/t/...12-c-33-build-need-root.4478889/post-87271815
KnowNadda said:
I have the same issue on my KB2003 since 13.1. No wi-fi or incoming/outgoing calls on either SIM. Had to put my SIMs in other phones before factory resetting which accomplished nothing.
I need to downgrade to 13.0 or try a different variety of 13.1. It does not appear, based on posts, to be a widely experienced problem.
If you have found a solution, please share.
Click to expand...
Click to collapse
When you insert sim-card smartphone (in this example 8T) checks what carrier it belongs to and activates looks in the inbuilt profile base and activates the appropriate one for your carrier.
If the phone doesn't find the one for your carrier it activates the generic one, which may work only partially for your carrier or don't work at all if settings mismatch.
That worked generally good in OOS11/12/13, but OnePlus changed smth in OOS13.1 which makes magisk VoLTE enabler modules only partially (but still) effective, and also specified by you problems occur.
You can try to activate engineering mode (easier via magisk module) and change carrier profile manually from within phone.
It can be also done via PDC software in Windows.
If you don't want or can't do the above mentioned you can try different carrier sim cards or apply for support (carrier or oneplus).
BillGoss & Rootk1t
Thanks for the suggestions. I have time this afternoon to try things.
I had no idea my perfectly configured and operating phone running T_Mo and Verizon SIMs would get crapped by a seemingly minor update. I would have waited for Android 14 if I had.
Wondering why I can't even get Wifi working. I may MSM back to 11 and try to get back on13.0 and STOP!
I don't want to keep using my Pixel 6 Pro because it's size & weight are enough to make me miss my 8T.
I have Oneplus Engineer mode unlock & VoEnabler modules active in Magisk. No icon indicating VoLTE active when both SIMs indicated VoLTE prior to 13.1 . I have QPST installed but after poking around I think I need to throw in the towel on 13.1 and somehow fastboot flash to downgrade or MSM to A11 and upgrade. How do I stop before 13.1 since I will likely only be offered a jump to 13.1?
Can I boot OrangeFox or TWRP and flash an older than current version since my bootloader is unlocked? I have the payload for OOS 13 F.63.
pixel-volte-patch/README.en.md at main · kyujin-cho/pixel-volte-patch
Rootless replacement for persist.dbg.volte_avail_ovr patch - pixel-volte-patch/README.en.md at main · kyujin-cho/pixel-volte-patch
github.com
Try this will work for sure without root