Related
Hello,
I have HTC Desire S. I did HTCDev.com unlock, but again and again there are problems to root this device. I can't flash recovery via fastboot, hangs on sending files etc. Went through many guides and nothing:
http://forum.xda-developers.com/showthread.php?t=1194488
http://forum.xda-developers.com/showthread.php?t=1318919
http://forum.xda-developers.com/sho...m.xda-developers.com/showthread.php?t=1399331
Always there is something like adb shell /data/local/tmp/zergRush > Cannot copy boomsh: Permission diened etc. problems.
I am totally lost. can you give me few hints how to or downgrade to 0.98.00000 or whatever to install custom recovery. Please! :s
Can you please help me root this device, install clockwork recovery and rom to MIUI? I have rooted another, my old HTC Desire before, but there anything went fine.
***Unlocked***
SAGA PVT SHIP S-ON RL
HBOOT-2.00.0002
RADIO-3822.10.08.04_M
eMMC-boot
Aug 22 2011, 15:22:13
Guys, really need your help, please! Will pay dollars for help.
This is such a huge pain in the ass! Sorry for 2xpost.
I have followed this guide: http://forum.xda-developers.com/showthread.php?t=1399331
I really managed to get to this point with success:
5. now type
adb shell /data/local/tmp/misc_version -s 1.27.405.6
--> this will change your version information
Click to expand...
Click to collapse
and problem starts on:
6. now you can doubleclick on the privous downloaded RUU and follow the steps. it may tell you from going down from version 2.xx to 1.xx but it is possible.
7. phone reboots and when it is up again you should have android 2.3.3 hboot 0.98.0000 S-ON
8. now just download revolutionary from http://revolutionary.io and create a beta key and start programm
Click to expand...
Click to collapse
RUU installer simply freezes on "Sending" data to phone. I am stuck there, sometimes it gives error [171], sometime shows that ''battery less than 30% remaining''. What the heck is going on? (I have locked bootloader before RUU install, because I have read that it should be like that.) (HTC Sync installed before RUU install)
You need to relock the bootloader with the command "fastboot oem lock"
So boot the phone into fastboot, then in cmd run above command, then re try the RUU.
Already did that, but with no success. Still the same problem. RUU installer freezes on "Sending".
---
As I enter bootloader ***Unlocked*** on the top is changed to ***Relocked***, so command "fastboot oem lock" did the job.
Try extracting the rom.zip file from the RUU, then renaming it to PG88IMG.zip then place that file on your SDcard root then apply the update in hboot.
I have dowloaded RUU file which is .exe, is there any RUU what you would recommend for me? (phone is not branded, Europe: Latvia) Maybe I am using wrong RUU also?
And as I will put PG88IMG.zip in to SD card, how should I apply the update in hboot, by running some command in cmd?
@Forwox
To get the ROM.zip from the RUU and to install via PG88IMG.zip
Start the RUU and once at the main page go to Start>Run and type in %temp%
Next find the newest folder and in there will be file called rom.zip. Copy this file to the desktop and rename it to PG88IMG.zip
Now copy this file to your SD card and start the phone in HBOOT (turn it on whilst holding volume down). It will find the file and start the update.
If that fails please run this fastboot command "fastboot getvar all" and post its results and the RUU you are trying to install.
Well, I got that rom.zip from %temp%, newest folder found rom.zip (rom.zip date modified is 2011.03.15) , put it into SD card, then entered HBOOT and it gave me:
SD Checking...
Loading... [PG88DIAG.zip]
No image!
Loading... [PG88DIAG.nbh]
No image or wrong image!
Loading...[PG88IMG.zip]
No image!
Loading... [PG88IMG.nbh]
No image or wrong image!
As I enter into cmd and run "fastboot getvar all" it gives me:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0002
(bootloader) version-baseband: 3822.10.08.04_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.27.405.68
(bootloader) serialno: SH17CTJ03677
(bootloader) imei: 356708045855945
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 4177mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ebd3df7d
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.016s
Click to expand...
Click to collapse
I am trying to install RUU_Saga_HTC_Europe_1.28.401.1_Radio_20.28b.30.0805U_38.03.02.11_M_release_177977_signed
When I tried this: http://forum.xda-developers.com/showthread.php?t=1399331 method before, I went so far and got stuck with RUU...exe installing: (see attachemen 1.)
EDIT!!!
I have managed to flash RUU by copying it to SD card (writing .zip was the problem), flashed via HBOOT, but nothing have changed!)
(see attachement 2. when flashing 3., 4. when RUU is flashed)
Try to install the 1.47... (dont remember the exact number) using the installer... I've downgraded it with that version following the same tut as u did. Dont know if it makes a difference but give it a try... or maybe there's someone else who could help u (im not really a pro ^^)
Sent from my HTC Desire S
Forwox said:
Guys, really need your help, please! Will pay dollars for help.
This is such a huge pain in the ass! Sorry for 2xpost.
I have followed this guide: http://forum.xda-developers.com/showthread.php?t=1399331
I really managed to get to this point with success:
and problem starts on:
RUU installer simply freezes on "Sending" data to phone. I am stuck there, sometimes it gives error [171], sometime shows that ''battery less than 30% remaining''. What the heck is going on? (I have locked bootloader before RUU install, because I have read that it should be like that.) (HTC Sync installed before RUU install)
Click to expand...
Click to collapse
are u'r phone already have firmware version 1.27.405.6, if that..u can try uninstall HTCsync first and leave the driver..n now u can try run RUU upgrade again..n see..
i hope this help u..
YESSSS, FINALLY DID IT!!!
What were my problems? RUU was the incorrect versions, few problems with PC drivers, that's why fastboot recovery flashing didn't worked and the only way to go was Revolutionary, but it does not work on 2.00.xxxx HBOOT version, that's why downgrade was needed.
My HTC Desire S now:
-Revolutionary-
SAGA PVT SHIP S-OFF RL
HBOOT-6.98 1002
RADIO-3805.06.02.03_M
eMMC-boot
Mar 10 2011, 14:58:38
Click to expand...
Click to collapse
Before:
***LOCKED***
SAGA PVT SHIP S-ON RL
HBOOT-2.00.0002
RADIO-3822.10.08.04_M
eMMC-boot
Aug 22 2011, 15:22:13
Click to expand...
Click to collapse
What have I done:
*HTCDev.com Unlock and then Relock, downgrade from HBOOT-2.00.0002 to HBOOT- 0.98.0002 is done, RUU installed, S-OFF made via revolutionary, MIUI ROM installed.*
Here is a little walkthrough from *pain in the ass* to total success how it was in my case :
------------
1. Installed all necessary android related drivers to PC.
2. In Desire S phone turned off "fastboot" option in Settings/power/fastboot. Turned on USB debugging Settings/Applications/Development/USB debugging
3. Switched on and connected phone to PC (Charge only).
3.1 If your HTC Desire S in HBOOT shows pink ***LOCKED*** go to HTCDev.com and unlock it.
4. Downloaded files from this topic: http://forum.xda-developers.com/showthread.php?t=1399331 (zergRush and misc_version ONLY!!!)
Unziped the downloaded files in a folder (e.g. c:/Users/yourName/Downloads)
5. In Windows went to Start>Run and typed cmd. Now you needed to relock the bootloader with the, so typeed command "fastboot oem lock" in terminal just just I opened. "I recommend to restart the phone and after that connect to Charge only again as before."
3. Run the Terminal again and changed into the folder where I unzipped files before (change folder with 'cd')
4. Now typed to the terminal (every line is one command!)
adb push zergRush /data/local/tmp
adb push misc_version /data/local/tmp
adb shell chmod 777 /data/local/tmp/zergRush
adb shell chmod 777 /data/local/tmp/misc_version
adb shell
(IF THERE IS ANY PROBLEM WITH zergRush or BOOMSH, and only $ shows up, type this):
4.1 rm /data/local/tmp/boomsh
4.2 rm /data/local/tmp/sh
4.3 cd /data/local/tmp/
IF NO PROBLEM EXPLAINED ABOVE, THEN KEEP TYPING AFTER PREVIOUS adb shell THIS:
cd /data/local/tmp/
./zergRush
5. Then typed
adb shell /data/local/tmp/misc_version -s 1.27.405.6
"This will change your version information, but you need the same RUU version!"(don't type this in cmd, of course)
6. Now found appropriate RUU for device. I used RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199410_signed and it worked like a charm!!! I have tried two other with no success on downgrade. My Desire S is non-branded!
7. Run that downloaded RUU .exe file, went to Start>Run and typed in %temp% Now clicked "Date modified" and found the newest folder and in there will be file called rom.zip. Copied this file to the desktop and renamed it to PG88IMG (adding .zip extension was the trouble maker for me! But you can try)
8. Copied this file to my SD card and start the phone in HBOOT (turn it on whilst holding volume down). The phone found the file and started the update.
9. Phone restarted and you I saw HBOOT- 0.98.0002 instead of HBOOT-2.00.0002 as it was before. If it is like that, then you have successfully downgraded your HTC Desire!
8. Now just download revolutionary from http://revolutionary.io and create a beta key and start programm. It will do S-OFF on your device.
DONE!
Now you can install any ROM by your choice.
Good luck and don't give up! It took me 3 days, but I didn't gave up.
I hope this report somehow helps users like me, who faces the same problems and storyline.
Many thanks to foX2delta and SuperKid who helped, and topics in this forum.
Glad it worked out, never heard of a RUU not working in this way (want main version, wasnt CID related). Only thing I can think of is maybe the RUU's (v1.28/1.47) each respond differently to the later versions (v2.10) or luck of the gods or a bad download of the RUU.
As foX2delta said
foX2delta said:
or a bad download of the RUU.
Click to expand...
Click to collapse
So remember always checking md5 sums, even if it was not necessarily because of that.
Sent from my HTC Desire S
This worked for me too. If you've unlocked the bootloader though htcdev though, you HAVE to relock it, otherwise flashing the older RUU will give an error message. This makes me wonder if unlocking it is even needed at all.
You know what??? you're a life saver!
I followed your steps and managed to make it .... phew!!
I used the RUU directly though, it worked fine once the bootloader is locked again
Thanks!
ahmedsalahais said:
You know what??? you're a life saver!
I followed your steps and managed to make it .... phew!!
I used the RUU directly though, it worked fine once the bootloader is locked again
Thanks!
Click to expand...
Click to collapse
At least, glad this worked for you. Enjoy it.
HELP! ok i unlocked my desire s using HTCdev.
and i download both zergRush and misc_version and unzip it on c:\users\user\downloads
so i go to cmd and type in those commands but i got this
c:\Users\user\Downloads>adb push zergRush /data/local/tmp
'adb' is not recognized as an internal or external command,
operable program or batch file.
need to downgrade it from 2.00.0002.
*latest update. now it says
c:\Android>adb push zergRush /data/local/tmp
error: device not found
**latest update.
C:\Users\user>cd c:\Android
c:\Android>adb push zergRush /data/local/tmp
1152 KB/s (14157 bytes in 0.012s)
c:\Android>adb push misc_version /data/local/tmp
644 KB/s (15837 bytes in 0.024s)
c:\Android>adb shell chmod 777 /data/local/tmp/zergRush
c:\Android>adb shell chmod 777 /data/local/tmp/misc_version
c:\Android>adb shell /data/local/tmp/zergRush
/data/local/tmp/zergRush: /acct: permission denied
acct: permission denied
acct: permission denied
acct: permission denied
acct: permission denied
/data/local/tmp/zergRush: 6: Syntax error: "(" unexpected
--------------------solve---------------
No htcdev needed?
I'm a newbie, but I think you do not need to unlock then relock bootloader via htcdev. Doing this is basically telling HTC you are voiding your warranty. I am trying this method tonight and will report if HTC unlock is needed.
I had unlocked bootloader via htcdev.com and installed a custom rom. now i need to go back to stock rom so i downloaded old RUU
I tried the steps above and iam getting the following message.
/system/bin/sh: 4.3: not found
C:\Android>adb push zergRush /data/local/tmp
351 KB/s (23060 bytes in 0.064s)
C:\Android>adb push misc_version /data/local/tmp
694 KB/s (589849 bytes in 0.829s)
C:\Android>adb shell chmod 777 /data/local/tmp/zergRush
C:\Android>adb shell chmod 777 /data/local/tmp/misc_version
C:\Android>
C:\Android>adb shell
[email protected]:/ $ 4.1 rm /data/local/tmp/boomsh
4.2 rm /data/local/tmp/sh
4.3 cd /data/local/tmp/4.1 rm /data/local/tmp/boomsh
/system/bin/sh: 4.1: not found
127|[email protected]:/ $ 4.2 rm /data/local/tmp/sh
/system/bin/sh: 4.2: not found
127|[email protected]:/ $ adb shell /data/local/tmp/misc_version -s 1.27.405.6
hell /data/local/tmp/misc_version -s 1.27.405.6
/system/bin/sh: 4.3: not found
127|[email protected]:/ $
Pls help
Leave the 4.1, 4.2 and 4.3 aside. In case you didn't put attention - they're just step numbers, and aren't part of the commands.
You're making an awful mess.
Hi to everybody,my friend has a problem with his desire S.
his phone is turned off itself vibrating.now he can boot only in bootloader mode,and the recovery is gone.
here some spec.
-Revolutionary-
SAGA PVT SHIP S-OFF RL
HBOOT-6.98.1002
radio-3805.06.02.03_M
eMMC-boot
Mar 10 2011,14:58:38
( bootloader ) version: 0.5
(bootloader) version-bootloader: 6.98.1002
(bootloader) [email protected] baseband : 3805.06.02.03_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.47.401.4
(bootloader) serialno: xxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: HTC__405
(bootloader) battery-status: good
(bootloader) battery-voltage: 3653mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 361a7ba6
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
tried this http://forum.xda-developers.com/showthread.php?t=1488672 but no luck.when starts to flash the recovery,the vertical progress bar stops and the phone begins to vibrate.
He also tried to flash the eng hboot to run a RUU,but seems he can't flash the hboot (hangs on "writing hboot").
thanks for any help.
Did your friend happen to pull his battery anytime before all this started?
Recovery doesn't just "disappear" - he must have done something prior to that...
Anyway, the first thing is to rule out (or in) a fried eMMC
So do this:
Set up adb/fastboot and connect your phone (link in my sig)
Then connect your device to the PC, enter recovery, open cmd (command prompt) on the PC and type:
adb shell
dmesg | grep mmc0
For further details, consult this excellent guide by amidabuddha:
http://forum.xda-developers.com/showthread.php?t=1284196
thanks for the quick reply.when I have the output of the dmesg | grep mmc0 ,I'll post here.I haven't the phone with me,so I have to wait for my friend.
the phone,does not appear to be recognized by adb
C:\android-sdk-windows\platform-tools>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
but through fastboot devices the output is mb139tj10369 fastboot.
any ideas?
NeTvAmPiRe70 said:
the phone,does not appear to be recognized by adb
C:\android-sdk-windows\platform-tools>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
but through fastboot devices the output is mb139tj10369 fastboot.
any ideas?
Click to expand...
Click to collapse
Well, since you can get to fastboot, try this anyway.
Also, see if flashing recovery again gets you up and running.
Boot into fastboot on the phone, and using the cmd terminal, push a new recovery to the phone. I'm attaching 4EXT recovery. Just download it, extract recovery.img from the zip file, put it into your adb/fastboot folder and issue the following command:
fastboot flash recovery recovery.img
Then try to boot into recovery and tell me what you see...
DOWNLOAD : 4EXT Recovery
enigmaamit said:
Well, since you can get to fastboot, try this anyway.
Also, see if flashing recovery again gets you up and running.
Boot into fastboot on the phone, and using the cmd terminal, push a new recovery to the phone. I'm attaching 4EXT recovery. Just download it, extract recovery.img from the zip file, put it into your adb/fastboot folder and issue the following command:
fastboot flash recovery recovery.img
Then try to boot into recovery and tell me what you see...
DOWNLOAD : 4EXT Recovery
Click to expand...
Click to collapse
...no luck hangs on "writing recovery".
NeTvAmPiRe70 said:
...no luck hangs on "writing recovery".
Click to expand...
Click to collapse
Okay, i'm attaching 4EXT recovery in PG88IMG.zip format. Just place this on your sd card root, and boot into bootloader... it will try to flash this recovery on its own the moment it detects it. Let's see what happens...
DOWNLOAD HERE
enigmaamit said:
Okay, i'm attaching 4EXT recovery in PG88IMG.zip format. Just place this on your sd card root, and boot into bootloader... it will try to flash this recovery on its own the moment it detects it. Let's see what happens...
Click to expand...
Click to collapse
this is not the same thing but with a different recovery?
however,I'll give it a try.
NeTvAmPiRe70 said:
tried this http://forum.xda-developers.com/showthread.php?t=1488672 but no luck.when starts to flash the recovery,the vertical progress bar stops and the phone begins to vibrate.
Click to expand...
Click to collapse
NeTvAmPiRe70 said:
this is not the same thing but with a different recovery?
however,I'll give it a try.
Click to expand...
Click to collapse
I don't know what was there in that file... so i sent you mine.
But if fastboot wasn't working, the possibility of an eMMC brick is looming larger...
Just try the commands i asked you to type in my first post... I mean boot into bootloader, then see if these commands cough up a report... if it doesn't work, boot into fastboot and try again. You must have some kind of recovery man...
Also, you didn't say what happens when you select Recovery option from the bootloader... what happens?
enigmaamit said:
Okay, i'm attaching 4EXT recovery in PG88IMG.zip format. Just place this on your sd card root, and boot into bootloader... it will try to flash this recovery on its own the moment it detects it. Let's see what happens...
DOWNLOAD HERE
Click to expand...
Click to collapse
...same as before,when starts to flash the recovery,the vertical progress bar stops and the phone hangs on "do not power off the device".
tried the dmesg | grep mmc0 both from bootloader and from fastboot but the phone,does not appear to be recognized by adb.
when he select recovery from the bootloader,appears the white screen with the htc logo,then the phone turns off itself vibrating.
NeTvAmPiRe70 said:
...same as before,when starts to flash the recovery,the vertical progress bar stops and the phone hangs on "do not power off the device".
tried the dmesg | grep mmc0 both from bootloader and from fastboot but the phone,does not appear to be recognized by adb.
when he select recovery from the bootloader,appears the white screen with the htc logo,then the phone turns off itself vibrating.
Click to expand...
Click to collapse
Then i think your friend might have fried his eMMC.
Last resort is to call in the expert : Send a PM to amidabuddha, the guy whose guide i linked in my first post. I haven't found anyone more knowledgeable in these matters. If anyone can help you, its him.
I hope you can salvage the device...but its not looking very good....
thanks for your help,I'lll contact the expert
...and the expert has decreed:fried eMMC
NeTvAmPiRe70 said:
...and the expert has decreed:fried eMMC
Click to expand...
Click to collapse
That's what i thought too... just didn't want to mouth off such a grave judgement without being doubly sure.
Very sorry - unable to help any further. Hope your friend takes the news well, and wish him/her better luck for the next device!
Hey guys, I have a problem with this phone HTC one mini, in fact I'm trying to unlock it with Sieempi method, but for this I need the device to be s-off. I unlocked the bootloader, the device be rooted, and when I try to use Rumrunner i got this error message.
Code:
Dear User: We will expect that YOU:
(1) Know how to use ADB and FASTBOOT binaries
---- [Yes, use these tools to test USB connection BEFORE running rumrunner] ----
(2) Realize that rumrunner S-OFF cannot support every CUSTOM rom in this world
(3) Understand that irc support IS NOT A GENERAL HELPDESK
(4) Are able to identify and download the CORRECT package for YOUR device
(5) Know how to enable USB-debugging on YOUR device (Yes, do that now)
(6) Understand that you may NOT repack or redistribute rumrunner S-OFF
Ok?
(Yes/No)
Yes
!! Do NOT for any reason taunt, unplug, drop, eat or pet your device !!
Please wait....
..........
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (19/120)
Waiting
Test 2: Booting device
Waiting for ADB (55/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please..............................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (7/120)
Waiting for ADB (55/120)
must ferment longer...
chilling..................
it's a little stinky here, hmm....
bottles are packed, here we go, shhhhhh....
hmm, cap is on tighter than I expected........
hell, that damn cap is on REALLY tight.......
unfortunately this isn't going to work out with your configuration. you have 2 options:
1.) flash an unsecure kernel that's compatible with your ROM and retry rumrunner (preferred and most reliable method).
2.) flash a different rom.
NOTE: No amount of messing around with su binaries and apk's is going to fix this issue for you!!!.
Better luck next time!!!!bye
Press ENTER to exit
Then i find this theard
http://forum.xda-developers.com/showthread.php?t=2573479
And download this two files, but then I stuck.
I'm not sure how to do the rest, but I tried it this way and I have failed.
I unpacked JmzM4_Kernel-09-4-13.zip file, and copied the boot.img file in the SDK folder from where I started CMD. In the CMD I typed "fastboot flash boot boot.img" and I got the message OK.
Then I went into recovery and found JmzM4_Kernel-09-4-13.zip file on the internal memory of a cell phone and I tried to install it (so I read) a zip file, and then I got the error MD5 file check, something like that.
I then reboot to recovery again and tried to install "JmzM4StockRootedOdex-WWE 1.22.401.1" also a zip file, and again the same error MD5 file check.
Then the phone in fastboot mode remained and could not boot the system. So I had to do a restore of backup I in which they made before I got into flash kernel, and roma.
Here is also my fastboot getvar all the info.
Code:
C:\ADB>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 2.22.0000
INFOversion-baseband: 1.28.40e.00.24
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 4.14.401.1
INFOversion-misc: PVT SHIP S-ON
INFOserialno:
INFOimei:
INFOmeid:
INFOproduct: m4_ul
INFOplatform: HBOOT-8930
INFOmodelid: PO5820000
INFOcidnum: HTC__032
INFObattery-status: good
INFObattery-voltage: 4316mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-0e1af350
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.124s
C:\ADB>
Can someone tell me what is the solution for my problem, I just want my device S-off to try Sieempi method of unlocking, to see if it works. Thx!
Nothing? I try a couple thing more. I think its problem in the file I downloaded, and download a MD5 checker, and says thats ok. Then I save a md5 file from Md5 checker @ the same folder like zip file, and run again from recovery, and now got another error, you can see image.
IMG]http://tapatalk.imageshack.com/v2/14/10/08/624d91145625043f190be1d67997e6a2.jpg[/IMG]
Revone method doesnt work i got error -2. And boot intro the bootloader and stil s-on.
Please lock theard, phone was smashed. I lost nerves!
Hi Errornt
pardon if i only post today!
had your same situation and now i've solved! the solution? just flash a new kernel! i've used xXminiWHOOPERxX Kernel and now.... i'm s-off
so, unlock bootloader, install custom recovery and root, flash an insecure kernel with fastboot method and run rumrunner
that's all
i'm sorry for your smashed phone
br
ss
Hi,
My htc desire x keeps rebooting with just htc logo and black screen. I can access hboot and it's locked but I can't select any items from the list. I can also access RUU and some hboot commands from putty serial connection. I don't know how this happened, but before this problem I had a blinking orange led + no charging problem I solved it easily. The phone runs completely on stock firmware.. Please help.
And hboot is:
Code:
*** LOCKED ***
PROTO PVT SHIP S-ON
HBOOT-1.25.002
RADIO-1.15.40.04
eMMC-boot
May 13 2014, 21:39:32:0
images:
i'm a new user so i can't post links.
and commands in putty:
command list
dmesg
last_dmesg
clearaspflag
refurbish
get_identifier_token
checkKeycardID
keytest
heap
boot
reset
powerdown
rebootRUU
heap_test
erase_phone_storage
erase_nfc_record
gotohboot
resetgift
ats
rtask
task
enableqxdm
gencheckpt
readmeid
lock
writesecureflag
readsecureflag
readsimlocktype
clearsimlocktype
readcid
writecid
readusername
writeusername
resethtcdebugflag
load_emmc
check_emmc_mid
read_mmc
get_wp_info_emmc
send_wp_info_emmc
get_ext_csd_emmc
get_sector_info_emmc
cpld_init
cpld_reg
Hi,
Thanks for using XDA Assist kindly post your question here Desire X Q&A, Help & Troubleshooting were experts using your device can help you in better way
Good Luck!
This requires an ENG HBOOT, get it here
1. Run the command line and type the command: cd (your platform tools folder) (Press Enter after each command)
2. Enter the command adb devices . It should come back with a list of connected devices and your serial number.
3. Enter the command adb reboot bootloader . (Your device will reboot and boot into a FastBoot USB)
(If your phone will not boot in normal mode. Manually reboot to boot and select fastboot).
4. Enter the command fastboot getvar mid .The window will show your current mid.
5. Enter the command fastboot oem writemid PG58*****
6. Enter the command fastboot reboot-bootloader
7. Enter the command fastboot reboot