Hi,
I am not sure if this problem is related to
- Mobile Phone
- Android Auto
- Car
So my question is: Does someone already has a working Android Auto connection with a car´s radio with this phone?
If so, I will continue this in Android Auto section.
Today I upgraded build to: MHA-L29C432B138
Car/Radio: Opel Astra K (MY2017)/ Intellilink R4.0
The connection could be established. But screen of car stays black. When touching screen or saying "OK Google" it accepts voice command.
My Mate 7 works perfectly...
Best regards,
Robert
no idea... working oke on my golf 7 2015 mib2 unit..
u using original cable... i also try ith lumia 950 cable, also usb-c but random disconnecting with this cable.
P9 is also working. I guess the problem is Mate 9.
Mine works with Pioneer but doesn't work well. It Will not play anything already downloaded to the device unless you connect phone to head unit forest and actually play something through Bluetooth first and THEN connect it. All permissions are set correctly etc. And what is with having to give it permission to use the data on the phone EVERY SINGLE TIME?
US model working flawlessly with 2016 VW Golf R... I did have to reinstall audible and spotify after connecting the first time in order for them to show up in the menu, but other than that, no issues with connecting, audio skips, etc. Very happy! Samsung S7 Edge was unusable with AA.
Got the International Mate 9 Pro and AA is working perfectly fine with my Pioneer 4100nex. I'm on the latest Pioneer firmware 1.09 if that helps anyone.
Works like a charm
What settings do you guys have? Do you have usb debugging or anything like that enabled in dev settings? Every time I hook up it comes up with the dialogue box to enable data access. Whether I click enable or not it will not play anything stored on phone. I've had this confirmed by Huawei Australia. They couldn't get it going either.
I have all the correct permissions set for all apps including android auto.
Any hints?
MontAlbert said:
What settings do you guys have? Do you have usb debugging or anything like that enabled in dev settings? Every time I hook up it comes up with the dialogue box to enable data access. Whether I click enable or not it will not play anything stored on phone. I've had this confirmed by Huawei Australia. They couldn't get it going either.
I have all the correct permissions set for all apps including android auto.
Any hints?
Click to expand...
Click to collapse
In developer options I do have "Always prompt when connecting to USB" turned off and "Select USB Configuration" set to MTP. I don't get prompted for anything on the phone. USB Debugging is off. I don't try to play anything from USB though, just use AA, Spotify, and Audible.
Other than that, I do have an Automagic script that when car ui mode is entered, the screen gets turned on, Waze is launched, slide to unlock keyguard is dismissed, and wifi is turned off. I won't need to do most of this when Waze is AA compatible, but until then, I can't live without it. This script works about 90% of the time, still haven't finished tweaking it for 100% success. Worst case, I have to turn the phone back on, swipe down on the notification panel, then select waze from "Notification Shortcuts".
bwillet said:
In developer options I do have "Always prompt when connecting to USB" turned off and "Select USB Configuration" set to MTP. I don't get prompted for anything on the phone. USB Debugging is off. I don't try to play anything from USB though, just use AA, Spotify, and Audible.
".
Click to expand...
Click to collapse
Seems this is possibly the issue. Whenever I connect usb it automatically changes the usb connection type to charge only. Won't let me change it to mtp, audio or anything else. Wonder if there is a hidden setting somewhere in emui that does this... Tried it in dev settings. Same issue. Charge only
MontAlbert said:
Seems this is possibly the issue. Whenever I connect usb it automatically changes the usb connection type to charge only. Won't let me change it to mtp, audio or anything else. Wonder if there is a hidden setting somewhere in emui that does this... Tried it in dev settings. Same issue. Charge only
Click to expand...
Click to collapse
I couldn't find anything else that I changed that seems relevant. I'm just using a standard USB to USB-C cable (Anker PowerLine+) plugged into the USB port in my VW Golf.
Did you change both of those settings I mentioned? If so, when you go back into dev settings does "Select USB Configuration" still say MTP, or did it default back to Charge Only? Maybe you have to reboot after? dunno...
bwillet said:
I couldn't find anything else that I changed that seems relevant. I'm just using a standard USB to USB-C cable (Anker PowerLine+) plugged into the USB port in my VW Golf.
Did you change both of those settings I mentioned? If so, when you go back into dev settings does "Select USB Configuration" still say MTP, or did it default back to Charge Only? Maybe you have to reboot after? dunno...
Click to expand...
Click to collapse
I changed those 2 you said but as soon as I plug in the Huawei cable (thought maybe it needed the Huawei cable) it changes itself to charging...
I'll keep looking into it. Thanks for your help though. This is obviously the issue.
I'm having the same issue in the US version on a 2017 VW GLI. My last two phones worked flawlessly.
MontAlbert said:
Seems this is possibly the issue. Whenever I connect usb it automatically changes the usb connection type to charge only. Won't let me change it to mtp, audio or anything else. Wonder if there is a hidden setting somewhere in emui that does this... Tried it in dev settings. Same issue. Charge only
Click to expand...
Click to collapse
Mine goes to charge only as well however my android auto is working perfectly.
It connects and on the phone side it seems fine but the head unit screen goes black and doesn't do anything.
Hi.. Is there anyway to prevent WhatsApp notifications showing up in android auto?
Mate 9 L29 - B156 in a Seat Ibiza 2016.
Android auto working fine.
You have reviewed android permissions, or if Google app or maps are set to close when the screen is turned off And enable activation?
In my old zenfone 3 that was the problem
Did any of you guys tried to enable the USB debugging mode?
Emil Borconi said:
Did any of you guys tried to enable the USB debugging mode?
Click to expand...
Click to collapse
JA! This was first thing, but no success.
I am also disappointed by Huawei customer care. They just point at Google and say it is not their fault.
Does anyone know how to log / where to find the log when "Force logging" is enabled in dev options in AA?
debart said:
JA! This was first thing, but no success.
I am also disappointed by Huawei customer care. They just point at Google and say it is not their fault.
Does anyone know how to log / where to find the log when "Force logging" is enabled in dev options in AA?
Click to expand...
Click to collapse
Open android auto, go to about, tap the Android auto title 10 times, you will see a toast saying your developer. Now from the 3 dotted menu on the right select developer options locate force logging and make sure it's enabled
PLEASE HELP (MAZDA 3 2018 AND SAMSUNG GALAXY S20+)
Can anyone help me? I recently just received my aawireless and my first setup process went smoothly. However on my second attempt to wait for my phone (Samsung S20+) to connect, it took awhile so I became a little worried (should of waited abit more) and I tried to troubleshoot the waiting time by unpairing it from my bluetooth devices on my phone so i can pair to it again, which i never happened. I then proceeded to do a reset by sticking a pin on the reset button, which i dont know if it worked because it doesnt signal me if it worked. (Attempted to click the reset button multiple times) The reset button did not help or change anything. However, when i went to reinstall my aawireless app, it is now prompting me to connect to an aawireless unit which I did attempt multiple times. As i tried multiple times for the app to find the device, it said device cannot be found. The LED light is always flashing a slow steady green light. Can anyone help? I have messaged Emil via Indegogo.
AAWireless has its own thread:
AAWireless - General discussion and support
This thread is dedicated for AAWireless users. AAWireless is a device which allows you to transform your existing wired Android Auto compatible unit into a Wireless Android Auto unit. General chat, experience sharing and community support...
forum.xda-developers.com
Hi. In the last couple of days, I used "Bluetooth Audio Receiver" from the Microsoft store to be able to play back music from my S20 FE android 11 device at work. I often step away from my work desk with my phone in my pocket, but yesterday I wasn't able to reconnect my phone via Bluetooth when I came back. Since then I can't connect to my work and my personal PC anymore, even tho I didn't even connect to my personal PC for a while.
I'm able to unpair and pair with said Windows 10 machines, but as soon as I tap the entry in the Bluetooth menu, it says "couldn't connect". I already tried to use the reset for wifi/Mobil/Bluetooth within the android setting, but it didn't change anything.
Restarted my phone and both PCs multiple times. It feels like something in my phone hang itself. I'm still able to send files from my PC to my phone and vice versa. I'm still able to fully use my smartwatch and Bluetooth headset.
Is there anything I can do? Any ideas?
PS: My phone is rooted.
Edit1: I just deleted cache and data of the Bluetooth app and did another reset of my network settings. I now can't pair with Windows 10 anymore. It says "couldn't connect" after the pairing dialog. My Win10 Device recognizes my Android device as paired. Which means I can't even send or receive files at my phone from my Windows 10 devices.
Edit2: My headset was still paired. Is there a way to reset saved pairing and data related to that?
Edit3: I don't know why I couldn't pair with my Windows device anymore, but it works again (Didn't do anything). Still can't connect to it, but can send files again.
TLDR:
Android 11 S20 FE can't connect to multiple Windows devices anymore with the massage: "can't connect".
UnPairing and pairing again won't help
Restarting effected devices won't help.
Resetting network settings won't help.
Nobody has an idea what it could have triggered it or what I could try to do?
Any idea is much appreciated.
Hi all,
First, thank you for all the job everyone does here. I'm new to this forum, so I hope I am posting in the right category and I respect the post format.
I am posting here because I recently bought a Junsun V1 (non pro) for my Mazda 2 on Aliexpress, but after one week of back and fourth with their support chat, I am unable to use Carplay over USB (not even talking about wireless).
First, I wasn't even seeing their "phonelink" app icon, which is needed to use Carplay over USB. After some exchanges with the support, they suggested me to "show" the icon using the secret menu 8888 beucase it was apparently hidden by default. And indeed, it was. So I was able to get the icon to show on the home screen, but every time I tried to open it, it would show "loading..." for ~15 seconds then close itself without saying anything.
I am using the original 4-pin USB cable, and also tried with the 6-pin one, without success. I also tried several lightning cables, and even with another iPhone (but my actual phone can use carplay in another car which had built in) but I can't manage to get it working. I have tried messing with the advanced USB settings, enabling carplay in the "engineer menu" (code 8877) enabling debug, but nothing works. I have also tried doing a factory reset, and the Junsun support sent me a firmware update, which didn't solve the problem.
I have found this post on XDA Developers of somebody mentioning the same kind of issue, but they seem to have fixed it by doing a factory reset, but in my case that didn't change anything.
I'm a little desperate to find a solution to this problem and even wonder if my unit doesn't have the necessary hardware to run CarPlay as apparently, the non-pro Junsun V1 didn't support it previously.
that's why I came to see if anyone has already had or seen this problem and would have a possible solution to give me. Otherwise I will turn to buying an external CarPlay dongle.
Thanks in advance and best regards !
Is it an MTCD type device, post Android system info with MCU version.
Don't hope, have a read through the forums.
Hi guys, tried to use android auto today for the first time and having absolutely no luck. Either with wireless or a cable. Car says device not recognized. I've rebooted both, deleted all devices off the cars system etc and still nothing. The phone connectsvia Bluetooth and takes calls and plays music no issue but android auto won't connect. When I plug the phone in via USB it says device not supported?
I've Googled and it seems this is a common issue. Does anyone know of a fix or having similar issues? I'm rooted so wondering is that the issue or could there be a workaround as I'm rooted instead perhaps. All suggestions welcome, thanks!
Bxperiaz3 said:
tried to use android auto today for the first time and having absolutely no luck
Click to expand...
Click to collapse
I was able to connect using these actions:
Developer settings - wireless Android Auto