Android Hotspot - show data used by connected devices - General Questions and Answers

Hallo
I have an Android 7 phone (Cubot Note Plus, rooted) which I just use as a WiFi Hotspot for my main phone, tablet and computers, when travelling.
The data plan I have is not that big, so I would like to know which connected devices are using how many data of my plan. Is there a way to check this?
In the data used, I only see the whole hotspot data, but not each connected device's data consumption.
Is there maybe an app to see that? Root is available, so maybe with Tasker (which is installed)?
Thanks for hints.
frank

Now I found this answer at StackExchange:
How to view devices connected to hotspot on Android?​I think this could solve my question, will try that app (Hotspot Manager...

Nothing was it. That old app "Hotspot Manager" does not work anymore, if I even get it as download from some strange sources.
I dont find any app to manage the Hotspot on an Android device like a real hotspot.
I could find the connected devices (IP, MAC) with:
Code:
ip neigh
but that was it, no managing possible.
It should be easy to write at least an app to block some devices and with root it really should be possible to get info about the traffic etc. and really manage the own hotspot.
Strange that this is so rarely needed.
More and more I use my phone (or my old phone) as Hotspot, using my 10 GB Traffic in month for other devices.
I would like to see a bit more than just that my traffic is now nearly consumed by some connected devices and so on.
Maybe I just didnt search well enough...

Related

Reverse Tether

I didn't know whether to put this in the "Android Software Development" forum or this one but does anyone know of an app that can preform reverse tether (with the help of tweaking the computers network) via USB and at the same time tether via WiFi.
ie: The phone will use the computer's internet via USB and then allow other devices to connect to the phone via WiFi and use the original computers internet. Basically turning the phone into a mini-router.
I don't know if this would even be possible. Seems like there would be a lot of data clutter. But I have seen apps out there that can preform reverse tether via WiFi on an ad hoc network.
I assume that if I can get at least the USB reverse tethering to work. I'd be able to use Froyo's built in WiFi tethering also assuming it uses the computers network and not default to 3G.
And the reason for even needing this app?
Is because 20Mbs > 3Mbs.
Nexus One
CyanogenMod-6.0.0 RC1
A Wireless G Router can be had for less than $20.00 - You can probably find a friend with an old one to give to you.
http://www.newegg.com/Store/SubCategory.aspx?SubCategory=145&name=Wireless-Routers
Why use the phone for this?
I don't know how to get it to work but on Android in a vm it says on the Android that the internet is being tethered to it through Ethernet I don't know If its an app ill take a screen shot later
Sent from my HTC Hero using XDA App

How to connect Android to the internet via USB - New Reverse tether app

This is a new app, that allows you to reverse tether your android (access your computer's connection via usb).
It doesn't require any extra software, or windows installations, or ADB/debugging, or tech savviness, and your connection looks like 3G so that all your apps work seamlessly including Market, Downloads and Talk. it requires a rooted device.
As you can see the process is very simple and takes only a few seconds... the app is called Reverse Tether and it's on the android market now.
A new version has been released
thanks.....
Thanks for this. By any chance would this happen to work on USB Dongles? And how would you setup the connection?
I can't see why not. Just use the wizard that is integrated in the app to help you set it up. The best way to find out really is to try it yourself, worst case senario you uninstall it.
not working
Hi!
I'm trying to do this on a droid x with the Apex ROM. When I start the app, it says "Failed to start Tethering. Make sure this device supports or allows Tethering. Otherwise, you won't be able to use this app.
There's not a whole lot of instructions on how to do a 'usb reverse tether' out there with this app. I have my connection set to "PC Mode" and I'm running on osx. I have to imagine that there's something special that needs to be done on the PC end that the instructions just aren't saying...
Thanks
wiz561 said:
There's not a whole lot of instructions on how to do a 'usb reverse tether' out there with this app. I have my connection set to "PC Mode" and I'm running on osx.
Click to expand...
Click to collapse
You don't need any instructions. It's just one button you click it and it's supposed to connect you.
Maybe it's because you have your connection set to "PC MODE"??? Dunno.
On some phones like mine, when it's set to PC mode you can't do anything else with it. So try to turn off PC mode, if you can't then set it to debugging, that will turn off for sure.
You can also test if tethering works on your device by going to settings > wireless and network - and enabling Tethering yourself.
Just curious as to why you would need this?
The phone has WiFi and/or the network.
thanks
Thanks for the info. I'll have to try this. I guess I just have a hard time believing that you just plug the phone in the computer and it automagically works. I would imagine you would have to bridge usb0 or do something.
I tried to enable the 'tether' mode and the computer sees usb0, but that's about as far as I get with it.
As for why I'm doing it... I don't want to be mean, rude, or start anything, but because I have to. I get annoyed because most of the 'reverse tether' threads ask 'why' and 'why not just use wifi', instead of posting something useful. Here's the reason.
When I'm at work, I'm in the middle of nowhere. I get no cell signal, even if trying to use a wilson repeater. I also get no wifi, since the AP's are far away from me. I can't install my own AP because of policies, so what other option do I have? Either a BT PAN or a USB reverse tether. I'm kinda pissed about it and why Verizon won't install anything to get a signal. I'm paying 90 bucks a month and can't use my phone for 8 hours a day.
Once you enable tether, keep it on and try running the app again while it's on. Maybe that will work.
Also, sorry, yes there's a guide in the app that helps you set up your computer, but it's just sharing, a one time thing.. you don't need to bridge anything. But to get there you need to get tether option working.
daybis13 said:
Just curious as to why you would need this?
The phone has WiFi and/or the network.
Click to expand...
Click to collapse
Why?
Not everyone have an unlimited mobile data plan. And if you have a limited plan, they're usually very expensive, so when you're at home or at work or at school why not spare your bytes and money?
And not everyone have access to WIFI or even need WIFI, it's silly to setup a WIFI network just for your phone. Besides, USB is musch faster, and more secure.
And since you're already connected to USB to recharge or sync, why not also have unlimited super fast internet for free?
RainZzz said:
Why?
Not everyone have an unlimited mobile data plan. And if you have a limited plan, they're usually very expensive, so when you're at home or at work or at school why not spare your bytes and money?
And not everyone have access to WIFI or even need WIFI, it's silly to setup a WIFI network just for your phone. Besides, USB is musch faster, and more secure.
And since you're already connected to USB to recharge or sync, why not also have unlimited super fast internet for free?
Click to expand...
Click to collapse
agree... :thumbup::thumbup:
Sent from my PHONE
RainZzz said:
Why?
Not everyone have an unlimited mobile data plan. And if you have a limited plan, they're usually very expensive, so when you're at home or at work or at school why not spare your bytes and money?
And not everyone have access to WIFI or even need WIFI, it's silly to setup a WIFI network just for your phone. Besides, USB is musch faster, and more secure.
And since you're already connected to USB to recharge or sync, why not also have unlimited super fast internet for free?
Click to expand...
Click to collapse
Yeah, I'm agree with RainZzz. This threads is useful. Thanks
Sent from my GT-I9100 using xda premium
droid x
I'm wondering, has anybody got this working on a droid x with the Apex rom? I've just about tried everything. USB Tethering loads drivers in Windows and works fine. The reverse tethering app still says the same error message. I'm starting to wonder if it's not compatible with the dx.
Thanks!
Hey wiz561, have you by any chance tried the most recent version? It seems like your issue have been fixed according to What's New.
If you don't have access to update, you can dowload the Reverse Tether APK file from the developer's website.
Dongle Support
Not compatible with the Transformer Prime. Though I'd instantly donate if it would allow dongles to work.
My question earlier was referring to the compatibility of this app with 3G/4G dongles. I ask because aren't dongles required to connect first via their dashboard/software before sharing the internet via USB? If that's the case, how then would this app reverse tether the dongle's connection? Is there a settings page for these things?
I wonder if it doesn't work for some of us because we have a LAN connection instead a wifi router or ethernet cable connection as the app says...
bad.bad.bad, when you connect your dongle, aren't you supposed to see its own Network Adapter in your Network Connections? I mean that's how Windows works. So just follow the same steps but share that network adapter instead.
Same goes for Netagirl, an ethernet connection is a LAN connection. So whichever network adapter connects you to the internet, share it with your phone's network that is created by the app.
RainZzz said:
bad.bad.bad, when you connect your dongle, aren't you supposed to see its own Network Adapter in your Network Connections? I mean that's how Windows works. So just follow the same steps but share that network adapter instead.
Same goes for Netagirl, an ethernet connection is a LAN connection. So whichever network adapter connects you to the internet, share it with your phone's network that is created by the app.
Click to expand...
Click to collapse
Yeah, I think I made a mistake, my connection from my pc to my external modem, is not via ethernet but USB, so I don't know if that affects. And yes, I do exactly what you said and the app says that I have to respect trial's limitation, at every single hour I'd try =/
I wonder how much battery consumption will reduce using this over wifi tethering... gonna have to try it out. Thanks

[Q] Issues with VPN & Tethering via USB

New Nexus 5 (2 weeks old) and currently running Stock / Rooted. I have successfully connected my phone to my work VPN, and other VPN networks that I use but the issue is when tethering with USB (may be the same with wifi) my IP address is still my cell providers network. Everyone else at work has an app they use to tether with their blackberry and I had to be cool and switch to Android first with the Nexus.
Is it possible to route the VPN traffic on the phone through USB tethering to mac or pc?
reflekt said:
New Nexus 5 (2 weeks old) and currently running Stock / Rooted. I have successfully connected my phone to my work VPN, and other VPN networks that I use but the issue is when tethering with USB (may be the same with wifi) my IP address is still my cell providers network. Everyone else at work has an app they use to tether with their blackberry and I had to be cool and switch to Android first with the Nexus.
Is it possible to route the VPN traffic on the phone through USB tethering to mac or pc?
Click to expand...
Click to collapse
Yes, run VPN client on your MAC/PC, it goes through the tether to use you phone as modem, VPN layered begins in the PC through the tether.
The only thing I've ever had to worry about is Android and windows has different encryption defaults, you might have to toggle options til it works.
nigelhealy said:
Yes, run VPN client on your MAC/PC, it goes through the tether to use you phone as modem, VPN layered begins in the PC through the tether.
The only thing I've ever had to worry about is Android and windows has different encryption defaults, you might have to toggle options til it works.
Click to expand...
Click to collapse
Thanks. Yeah, I was hoping it was possible on the phone itself. Our PC's get reimaged everyday (stupidly strict with the work computers) and have to start fresh and input the settings again.. and again.. and again. It would have just been one less thing to worry about.
reflekt said:
Thanks. Yeah, I was hoping it was possible on the phone itself. Our PC's get reimaged everyday (stupidly strict with the work computers) and have to start fresh and input the settings again.. and again.. and again. It would have just been one less thing to worry about.
Click to expand...
Click to collapse
What exactly are you trying to accomplish?
nigelhealy said:
Yes, run VPN client on your MAC/PC, it goes through the tether to use you phone as modem, VPN layered begins in the PC through the tether.
The only thing I've ever had to worry about is Android and windows has different encryption defaults, you might have to toggle options til it works.
Click to expand...
Click to collapse
nigelhealy said:
What exactly are you trying to accomplish?
Click to expand...
Click to collapse
Connect to my work network over VPN through the phone (which works) & then tether that connection to my work pc (which has some crazy restrictions).
- I connected to my work VPN on my phone using the built in Android VPN.
- Everything on the phone acts like it is suppose to, I can get on the INTRAnet, browse network drives, etc...
- I can tether the phone through USB with no issue however none of the traffic is routed through the VPN connection.
I don't really care about any tethering limits with networks as we have unlimited (including tethering) with Verizon, AT&T and T-Mobile. I tried a couple of the tricks I am finding out but noting is letting me route my phones VPN traffic over the tether.
- Made sure changed the settings to IPv4/IPv6
- Tried out the tether hack by adding tether_dun_required 0 to the SQL
No luck so far I will keep hunting around this weekend. If nothing works I will just have to get the IT people to install some VPN app into the PC Image for me which will probably take a month or so.
reflekt said:
Connect to my work network over VPN through the phone (which works) & then tether that connection to my work pc (which has some crazy restrictions).
- I connected to my work VPN on my phone using the built in Android VPN.
- Everything on the phone acts like it is suppose to, I can get on the INTRAnet, browse network drives, etc...
- I can tether the phone through USB with no issue however none of the traffic is routed through the VPN connection.
I don't really care about any tethering limits with networks as we have unlimited (including tethering) with Verizon, AT&T and T-Mobile. I tried a couple of the tricks I am finding out but noting is letting me route my phones VPN traffic over the tether.
- Made sure changed the settings to IPv4/IPv6
- Tried out the tether hack by adding tether_dun_required 0 to the SQL
No luck so far I will keep hunting around this weekend. If nothing works I will just have to get the IT people to install some VPN app into the PC Image for me which will probably take a month or so.
Click to expand...
Click to collapse
Idea 1:
Bootable USB stick running Ubuntu 14.04, you put all your setting to your heart's content into that image, you can then use the desktop device just as a big keyboard/mouse/screen and bypass any software restrictions and leave no footprint. Ubuntu does VPN.
Then its just the F key to press, F12 say on a Lenovo and anything you save is in the USB stick so any re-imaging is irrelevant as you never use that re-imaged at all.
Idea 2:
Remote desktop capability, your remote end runs Remote Desktop servers (e.g.Citriix) then from the local PC you connect to the gateway.
Idea 3:
Try different VPN software in Android. So sounds like the VPN on the Android device is layered only ontop for the Android apps not the whole device, so you need to put the VPN layer lower down. Try instead of Android's builtin VPN capability (Settings, ....VPN) try the VPNRoot app
Idea 4:
(I got plenty more... probably you'll like Idea 3 as its easiest for you)
nigelhealy said:
Idea 1:
Bootable USB stick running Ubuntu 14.04, you put all your setting to your heart's content into that image, you can then use the desktop device just as a big keyboard/mouse/screen and bypass any software restrictions and leave no footprint. Ubuntu does VPN.
Then its just the F key to press, F12 say on a Lenovo and anything you save is in the USB stick so any re-imaging is irrelevant as you never use that re-imaged at all.
Click to expand...
Click to collapse
Thats exactly what I was thinking but I run into the issue of needing to use the proprietary work software on the PC. I might do this just for the hell of it anyway because its always fun but it will probably just add in another step not needed.
reflekt said:
Thats exactly what I was thinking but I run into the issue of needing to use the proprietary work software on the PC. I might do this just for the hell of it anyway because its always fun but it will probably just add in another step not needed.
Click to expand...
Click to collapse
Hit refresh I was mid-edit oops send, put in more ideas..... you reminded me of a related problem with PPP Widget and USB 4G dongle which is an Android issue with VPN I got a workaround.
USB bootable sticks are cool, they cost nothing really an old 2GB stick, and lets you turn any borrowed x86 device into what YOU want. Handy for if laptops have a bad boot drive or bad OS issue. Lifesafer, part of your kit. I mentioned 14.04 as it has out-the-box MMTP and knows Nexus without tweaks and it Bluetooth tethers well to Android. I'm running it
nigelhealy said:
Idea 1:
Bootable USB stick running Ubuntu 14.04, you put all your setting to your heart's content into that image, you can then use the desktop device just as a big keyboard/mouse/screen and bypass any software restrictions and leave no footprint. Ubuntu does VPN.
Then its just the F key to press, F12 say on a Lenovo and anything you save is in the USB stick so any re-imaging is irrelevant as you never use that re-imaged at all.
Idea 2:
Remote desktop capability, your remote end runs Remote Desktop servers (e.g.Citriix) then from the local PC you connect to the gateway.
Idea 3:
Try different VPN software in Android. So sounds like the VPN on the Android device is layered only ontop for the Android apps not the whole device, so you need to put the VPN layer lower down. Try instead of Android's builtin VPN capability (Settings, ....VPN) try the VPNRoot app
Idea 4:
(I got plenty more... probably you'll like Idea 3 as its easiest for you)
Click to expand...
Click to collapse
Ugh yeah, I should have tried a different VPN app as that might fix my issue. I will give VPNRoot a shot later tonight. Not that it matters for what I need done but the "hacks" I used actually shows all data I used was coming from the phone, nice to know if I ever have to pay for my own service again.

[Q] wireless mobile hotspot hacking for android devices help.

Hi my name is jacob and I am a new on XDA and i have started a new thread because I have been all over the internet looking for a solution to this problem and none of them work. After i waved through all of the b******* i decided to come and see if any of you veterans can solve my problem.
i have been messing around with root and custom roms here recently maybe for a month and so far its great breathed new life into my old phone. Although I am having trouble with hacking my mobile phones hot spot (phone specifications and model listed below) i have tried everything wifi tether by TreVe, (hope I'm typing that right) changing tethering.dun in global settings database, (worked great until T-mobile eventually found me out) and everything else related to that. I am looking for a hack into my hot spot where T-mobile wont know s*** and it will work indefinitely. Reason why is I need internet for school and work purposes at home but, I live with my father and hes is on parole and can not have internet service at his home. I am a beginner but do have a little bit of sense in what I am doing if someone would kindly walk me through steps on how to completely unlock and hide my hot spot usage from T-mobile it would be greatly appreciated.
Also new thread for hacking native hot spot methods on any rooted android device.
My phone
Samsung Galaxy S2
carrier: T-mobile
model: SGH-T989 Hercules
no custom kernel (I understand I need some kind of net filter but can not find that online)
custom rom version: carbon 4.4.2 nightly
Thanks XDA community :good:
It won't be wireless, but PdaNet+ and USB tethering works just fine with a computer as long as you select the "hide tether usage" option. The program on the computer side also has a feature that turns your computer's wi-fi into a wi-fi router, which'll allow you to connect other devices.
Planterz said:
It won't be wireless, but PdaNet+ and USB tethering works just fine with a computer as long as you select the "hide tether usage" option. The program on the computer side also has a feature that turns your computer's wi-fi into a wi-fi router, which'll allow you to connect other devices.
Click to expand...
Click to collapse
yes i have tried PDAnet and that does not work for my needs as i also play the occasional online game with my PS4 I forgot to mention that sorry. I have tried to send out a wifi signal from my computer through CMD on my computer and none of my devices pick it up even though CMD says the signal is going out also done this with ADhoc networks with a LAN cable but did not work either. Thanks for the suggestion :good: I probably should have went into more detail with my post but I did not want to make it to terribly long sorry.
Planterz said:
It won't be wireless, but PdaNet+ and USB tethering works just fine with a computer as long as you select the "hide tether usage" option. The program on the computer side also has a feature that turns your computer's wi-fi into a wi-fi router, which'll allow you to connect other devices.
Click to expand...
Click to collapse
May it possibly hide my online gaming if I figure out a way to get reverse WiFi on my computer working will it still hide that or will it be detectable. I see my self as a somewhat computer buff but I put myself to shame when i cant get a reverse WiFi connection going from my computer. seems like a lot of trouble to go to for internet i wish there was a way to unlock native tethering and not jump through hoops. It would seem that it would be a simple fix and should also be free anyway since it is dealt with the phone's hardware not through the carrier american cell network providers are greedy that is like getting xfinity internet but before you can send internet to your devices you have to pay thirty dollars extra.
When you USB tether your phone to your computer with PdaNet+, all you have to do is select the "WiFi Share" option and set it up like any other hotspot (network name, password, etc). Couldn't be easier. I don't know how well this'll work for playing PS4 (or whatever) games, but I can use this setup to watch Netflix or youtube on my well enough.
There are ways to use the native hotspot on an Android phone, but all the "hacks" are done on the computer side. VPNs, browser masking, etc.
Planterz said:
When you USB tether your phone to your computer with PdaNet+, all you have to do is select the "WiFi Share" option and set it up like any other hotspot (network name, password, etc). Couldn't be easier. I don't know how well this'll work for playing PS4 (or whatever) games, but I can use this setup to watch Netflix or youtube on my well enough.
There are ways to use the native hotspot on an Android phone, but all the "hacks" are done on the computer side. VPNs, browser masking, etc.
Click to expand...
Click to collapse
i will try this method browser masking right now unfortunately don't have the money to buy a VPN maybe one of the ad supported free versions will suffice will report back tomorrow.
jacobis16 said:
i will try this method browser masking right now unfortunately don't have the money to buy a VPN maybe one of the ad supported free versions will suffice will report back tomorrow.
Click to expand...
Click to collapse
Method not working i still get the T-mobile up sell page through VPN's of all kind it masks the internet going through the computer but not the phone where the service originates. They still detect everything I am doing. I understand T-mobile has bots going through their lines that detects devices that are not mobile devices and shuts them down. If maybe there is a way to block T-mo completely from a mobile device and just sounds ridiculous but I know someone out there can find a way I have heard of peoples mobile data usage and their mobile hot spot gauge has not moved only mobile data was detected. I am not sure if this was false statements and was made up.
bump
Hi Jacob, I got my Note 3's native personal wifi hotspot connected to my ps4 with around 18Mbps Download and 6Mbps Upload, I adjusted the APN settings on my phone and managed to get around the data restriction.
I can post the exact settings I changed if you think it might work for you?

please help me monitor my hotspot

I have a
KAZUNA ETALK MYFLIX
Model: KAZ-N20
Hardware version: Ninja5_MB_1V1
Build number: N20_R039
Android: 10
I use it to run a hotspot for about 8 devices at a time in a area where there is no other access to internet but someone keeps using up the data and i cant figure out who it is is there a tool or utility for android that allows me to identify the devices connected and monitor or see their data usage and disconnect the culprit evenni its identified bynip address of the devices connected then i could use netcut or wifi thief to disconnect them
Please if anybody knows of a tool i can use to monitor and identify devices data usage please share so i can find it an learn how to use it
Set a long password for access to the hotspot and at least WPA2 / PSK. It may also be that your phone is sending data that you cannot identify.
ze7zez said:
Set a long password for access to the hotspot and at least WPA2 / PSK. It may also be that your phone is sending data that you cannot identify.
Click to expand...
Click to collapse
I can see the number of devices connected so its not someone connecting thats not suposed to be on its just im trying to narrow down who is useing the data by downloading alot or streaming so i need something that allows me to monitor connected devices data useage/network traffic
So i guess there isnt a app for this
It's a question of whether your hotspot even keeps statistics on individual usage.
Then the question of whether that's accessible through an API.
And finally, how you want to access it.
This is an unrelated hot spot, but it may give you some ideas.
I wrote a CGI program so that I could get some info easily instead of the web interface.
No, it doesn't have individual data usage.
https://forum.xda-developers.com/t/verizon-mifi-8800l-hot-spot-mods-hacking.4323669/post-87316097

Categories

Resources