First of all:
I'm no Dev...just someone who likes to play lego.
From this point of view everything I post here is taken from somewhere else in the Internet and used by your own risk.
I've read a good startup here.
Hopefully this makes this thread clear enough so that i dont need to describe the whole procedure step by step.
(https://www.naldotech.com/root-samsung-galaxy-z-flip-3-5g-magisk/)
(1.OEM-Unlock,2.BL-Unlock,3.extract boot.img,4.patch boot.img via magisk on the unrooted mobile,5.patch boot.img.tar to AP&BL via Odin, 6.pray)
Anyways...here are maybe small hints to avoid a few traps.
a) Just do the oem-unlock in the dev-options (enabled by tapping buildnumber 5 times) is just half of the rent.
Afterwards i had to go in Download-mode (switch of mobile, press volUp+volDown and connect PC-cable.)
There appears a possibility of choice.
Press VolUp short: get the mobile on standby to flash the rom via odin.
Press VolUp LOONG: get the mobile to the menu where the bootloader can finally get unlocked. (Otherwhise every try to patch a rooted img will be blocked by bootloader-protection.)
Of course this can possibly be done via adb/fastboot commands.
Funny side note: OEM-Unlock-option will completely disappear from Dev-options and waranty is lost. Also the mobile stops to get Updates OTA which means that you have to update manually whenever a new version will appear in the net.
b) patching boot.img via magisk should work as described in many other magisk-rooting-manuals.
Flashing the tar back to the mobile via odin was little bit tricky.
It doesnt reach out just to provide the magisk_patched.tar to Odin just on the AB-line.
I had to patch it to BL too.
Cheers
MikGx
When you boot into bootloader after unlocking, is the message something about "a custom OS can cause critical problems"?
As it stands now, the only reason I have to believe the US bootloader can't be unlocked (or isn't already) was the lack of an OEM unlock button and some cranky kid on the internet saying it hasn't been possible since the S7.
It doesn't make sense why I would have a warning about a custom OS if there is no possible way to install one, though.
@boot into bootloader after unlocking it...:
Yess you are right. Thats exactly the message.
Then you can enter the Device unlock mode again (long press VolUp) to lock bootloader again (then it resets automaticaly to factory-defaults and all work is gone.)
or
continue to flash something (short press VolUp).
Dont know about the US versions. Could be that there is a difference to my EU-models.
But either i rooted nearly every every mobile since the S2
MikGx said:
@boot into bootloader after unlocking it...:
Yess you are right. Thats exactly the message.
Then you can enter the Device unlock mode again (long press VolUp) to lock bootloader again (then it resets automaticaly to factory-defaults and all work is gone.)
or
continue to flash something (short press VolUp).
Dont know about the US versions. Could be that there is a difference to my EU-models.
But either i rooted nearly every every mobile since the S2
Click to expand...
Click to collapse
I think you misunderstood what I was asking, but ended up answering it anyway.
It seems the message about installing custom OS versions may be a boilerplate for the bootloader, not any indication that it's possible.
naldotech.com, the link you provide is pretty clear about the process. What it doesnt say is what to do at the end. When you untick "reboot" in odin, and you finish flashing, your phone will stay in download mode. Then what to do?. Press power and volume down to leave and restart the phone? or, power and volume down, screen goes black imediately power and volume up, enter recovery and restart from there.? please someone ?
Press the power and volume down buttons for about 7 seconds and it will reboot
beanbean50 said:
Press the power and volume down buttons for about 7 seconds and it will reboot
Click to expand...
Click to collapse
I did as you mention but it didnt work. It made me reset the system. But I Fallowed the naldotech.com guide. At the end, being in dawnload mode, I pressed power and volume down, when the screen got black I pressed power and volumen up, I entered recovery mod, cleared cache and re- started the system: Voila my phone is rooted
Hello.
Can someone pleas provide a working link for frija download? The one referring from naldotech seems to be broken (https://www.naldotech.com/download-samsung-galaxy-stock-firmware-frija-tool/)
Update: Found a link via google -> https://technastic.com/odin-download-samsung-latest-all-versions/
twistedumbrella said:
When you boot into bootloader after unlocking, is the message something about "a custom OS can cause critical problems"?
As it stands now, the only reason I have to believe the US bootloader can't be unlocked (or isn't already) was the lack of an OEM unlock button and some cranky kid on the internet saying it hasn't been possible since the S7.
It doesn't make sense why I would have a warning about a custom OS if there is no possible way to install one, though.
Click to expand...
Click to collapse
The USA version (snapdragon soc) can't be rooted as far as I know. There is no way to unlock the bootloader in dev options, at least on Verizon and that holds true even if you bought a unlocked phone. As soon as you insert a Verizon sim and the phone updates it's all over.
I had the same issue with the original Pixel. I bought it unlocked but before rooting it I allowed it to update like a fool. Luckily my son wanted the same phone so I gave him mine then rooted and installed TWRP before putting a Verizon sim in.
Back to Samsung...as far as I know you haven't been able to root the USA version since the note 8. The rest of the planet gets the Exynos SOC but we get the snapdragon and no root method works. My note 9, 10+ and z Flip3 didn't have an unlock bootloader option even before putting a sim in it.
d0x360 said:
The USA version (snapdragon soc) can't be rooted as far as I know. There is no way to unlock the bootloader in dev options, at least on Verizon and that holds true even if you bought a unlocked phone. As soon as you insert a Verizon sim and the phone updates it's all over.
I had the same issue with the original Pixel. I bought it unlocked but before rooting it I allowed it to update like a fool. Luckily my son wanted the same phone so I gave him mine then rooted and installed TWRP before putting a Verizon sim in.
Back to Samsung...as far as I know you haven't been able to root the USA version since the note 8. The rest of the planet gets the Exynos SOC but we get the snapdragon and no root method works. My note 9, 10+ and z Flip3 didn't have an unlock bootloader option even before putting a sim in it.
Click to expand...
Click to collapse
twistedumbrella said:
I think you misunderstood what I was asking, but ended up answering it anyway.
It seems the message about installing custom OS versions may be a boilerplate for the bootloader, not any indication that it's possible.
Click to expand...
Click to collapse
I have to be a little skeptical when my rooted Note 8 came out a year after the S7. There are other reasons, but they tend to make the trolls restless. We'll skip them.
twistedumbrella said:
I have to be a little skeptical when my rooted Note 8 came out a year after the S7. There are other reasons, but they tend to make the trolls restless. We'll skip them.
Click to expand...
Click to collapse
Ok I might be off by a year or 2 but I can say with 100% certainty that the note 9, 10, 10+ and flip3 don't have an unlock bootloader option.
I bought all 4 from Samsung all unlocked and not tied to any carrier. First boot with no sim I checked dev options and there was no option to unlock the bootloader. My note 9 might have had the option in the menu but it was grayed out and I couldn't find anyway to make it work.
A quick Google search for rooting the snapdragon version of any of these devices essentially says "NOPE".
The only way to root one is to buy a non US version. If it has a snapdragon soc you're out of luck.
d0x360 said:
Ok I might be off by a year or 2 but I can say with 100% certainty that the note 9, 10, 10+ and flip3 don't have an unlock bootloader option.
I bought all 4 from Samsung all unlocked and not tied to any carrier. First boot with no sim I checked dev options and there was no option to unlock the bootloader. My note 9 might have had the option in the menu but it was grayed out and I couldn't find anyway to make it work.
A quick Google search for rooting the snapdragon version of any of these devices essentially says "NOPE".
The only way to root one is to buy a non US version. If it has a snapdragon soc you're out of luck.
Click to expand...
Click to collapse
You got where I said "I guess the disclaimer is misleading" right?
twistedumbrella said:
You got where I said "I guess the disclaimer is misleading" right?
Click to expand...
Click to collapse
I didn't see that sentence in any of the posts but perhaps I just missed it.
It doesn't change anything either way. Anything is possible, even you somehow getting a device with this setting. That being said you also seem to be the only person ever to receive a USA device with said option.
It's hard to believe because it would mean the wrong firmware was installed (which makes no sense in itself) but with that firmware the device should have been a brick. The soc is completely different. It would be somewhat like trying to use Nvidia drivers on an AMD GPU... It just wouldn't work.
I dunno... I don't disbelieve you but I don't believe you either. It's just so far fetched for many reasons
d0x360 said:
I didn't see that sentence in any of the posts but perhaps I just missed it.
It doesn't change anything either way. Anything is possible, even you somehow getting a device with this setting. That being said you also seem to be the only person ever to receive a USA device with said option.
It's hard to believe because it would mean the wrong firmware was installed (which makes no sense in itself) but with that firmware the device should have been a brick. The soc is completely different. It would be somewhat like trying to use Nvidia drivers on an AMD GPU... It just wouldn't work.
I dunno... I don't disbelieve you but I don't believe you either. It's just so far fetched for many reasons
Click to expand...
Click to collapse
Lucky? I dunno. Had I known it would cause this much trolling, I wouldn't have bothered to mention it.
I have a general question. I am unfamiliar with rooting/unlocking bootloader on Samsung devices. Is it possible to revert unlocking the bootloader and going back to stock traceless?
david.siebauer said:
I have a general question. I am unfamiliar with rooting/unlocking bootloader on Samsung devices. Is it possible to revert unlocking the bootloader and going back to stock traceless?
Click to expand...
Click to collapse
Partially. I just did that: I have AfWall running on my old phone, tried to unlock the Flip with this manual here in order to use the firewall there, did something wrong - and stumbled upon Netguard while searching what might have happened and decided to give it a try first. (Unless there is a custom ROM for the phone available, I have no other need for root or an unlocked bootloader.)
From what I could find on my Flip 3, you can unlock and relock the bootloader as you like - but as soon as you install a non-genuine bootloader (i.e. one chnaged by Magisk) you will trip Knox - and this cannot be reverted.
In such a case you can still re-lock your bootloader and unlock it later (on my phone, that "7-day-no-switch-indeveloper-options" routine kicked in, but you can circumvent that) - but Knox will stay in its state. From what I read this means some things will not work such as Samsung Pay, but I do not know the details (yet) apart from that it does not bother me ;-), and the nag screen during boot is gone.
Thanks for your reply. Kinda sucks. Never had problems with my former mobiles to get back totally to stock without traces. Guess I disregard rooting for now
david.siebauer said:
Thanks for your reply. Kinda sucks. Never had problems with my former mobiles to get back totally to stock without traces. Guess I disregard rooting for now
Click to expand...
Click to collapse
Well, it's better than my Sony - there it is "once unlocked, always unlocked" with no way back at all
But I have to admit I understand the logic why the manufacturers do that, at least to the degree that they trip a fuse as Samsung does.
By rooting the phone, you shift the responsibility for the software state of the phone from the manufacturer to the user, so I think it is okay to implement something to make it clear to possible future buyers that it is or has been in that state.
(This does not include however all the other stones they put in the way of people wanting to develop or use custom ROMs!)
I remember I also had a Xperia Z3 compact.
Main reason for me for rooting, is the ability to use tools like tasker without non root restrictions or just trying customs roms without bloat, but usefull features. Guess u shouldn't have bought a Samsung lol.
david.siebauer said:
I remember I also had a Xperia Z3 compact.
Main reason for me for rooting, is the ability to use tools like tasker without non root restrictions or just trying customs roms without bloat, but usefull features.
Click to expand...
Click to collapse
Oh, trust me - as soon as I hear there is a custom ROM that works as a daily driver I will root mine as well. I really hope that there will be one for this phone
david.siebauer said:
Guess u shouldn't have bought a Samsung lol.
Click to expand...
Click to collapse
Sadly there is no Fairphone mini or Fairphone Flip - or would it be Fairfliphone? ... Flipfairphone?... - yet (if ever), so the only current alternative would be Motorola. And the price tag for the Razr is simply too much, even if I personally think it looks better than the Samsung. Additionally, I do not know if they are in any way better when it comes to rooting or loading custom ROMs.
Related
Noob question I know but I've tried reading up on the subject as much as I can - I still don't fully understand what exactly the locked loader does to this phone (aside from making it more difficult to root) and would really appreciate a brief explanation.
As I understand now the phone can be rooted, ROMs can be loaded (but they have to be specific to the VZW S3 right?), and full recovery options as well. Basically wondering what the disadvantages are and if they're more significant than just a little more work to root/mod the phone? Much thanks!
It prevents root access, you know jail breaking. You can't control your rom. You use the one provided to you by Verizon with all their bloatware. You can't change what software was delivered to you.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
It prevents changing boot.img
Sent from my SCH-I535 using xda app-developers app
saucyzest said:
Noob question I know but I've tried reading up on the subject as much as I can - I still don't fully understand what exactly the locked loader does to this phone (aside from making it more difficult to root) and would really appreciate a brief explanation.
As I understand now the phone can be rooted, ROMs can be loaded (but they have to be specific to the VZW S3 right?), and full recovery options as well. Basically wondering what the disadvantages are and if they're more significant than just a little more work to root/mod the phone? Much thanks!
Click to expand...
Click to collapse
A locked bootloader is ultimately intended to prevent you from potentially costing the carrier $money$ by:
Bricking your phone and then playing dumb when you return it for an exchange. (people on xda opening admit to this kind of fraud. kinda sad. you brick it you keep it!, or buy another)
Modifying your phone and then blaming bugs on the carrier. A support vampire.
Assuring content providers they've made exclusive deals with that their content is "secure".
Great Question!
If your phone was a Windows 7 computer....
If you rooted it, you'd have an account with Administrator access.
As for the bootloader... Suppose you wanted to upgrade to Windows 8, even though it hasn't been authorized by your ISP, on this Windows 7 computer with a locked bootloader.
You cant, c:\windows is locked. If you change anything in that directory, your Windows 7 computer will start, but only to display "Invalid System Software Installed! Please shutdown and return this computer to your ISP's store for assistance."
What we have on Verizon, is a phone with admin rights (rooted), where we can't re-install the software needed to boot a different operating system.
If you're interested in more detail on how the hardware prevents the bootloader from being cracked, and what the attack vectors are, you might be interested in the presentation linked from this post http://forum.xda-developers.com/showthread.php?t=1766638
(And yes I know that c:\windows isn't actually the boot partition on windows. Just trying to make it easier for the OP to understand.)
jmacko said:
Great Question!
If your phone was a Windows 7 computer....
If you rooted it, you'd have an account with Administrator access.
As for the bootloader... Suppose you wanted to upgrade to Windows 8, even though it hasn't been authorized by your ISP, on this Windows 7 computer with a locked bootloader.
You cant, c:\windows is locked. If you change anything in that directory, your Windows 7 computer will start, but only to display "Invalid System Software Installed! Please shutdown and return this computer to your ISP's store for assistance."
What we have on Verizon, is a phone with admin rights (rooted), where we can't re-install the software needed to boot a different operating system.
If you're interested in more detail on how the hardware prevents the bootloader from being cracked, and what the attack vectors are, you might be interested in the presentation linked from this post http://forum.xda-developers.com/showthread.php?t=1766638
(And yes I know that c:\windows isn't actually the boot partition on windows. Just trying to make it easier for the OP to understand.)
Click to expand...
Click to collapse
Thank you for this explanation, I found it helpful to hear such an analogy.
jmacko said:
Great Question!
If your phone was a Windows 7 computer....
If you rooted it, you'd have an account with Administrator access.
As for the bootloader... Suppose you wanted to upgrade to Windows 8, even though it hasn't been authorized by your ISP, on this Windows 7 computer with a locked bootloader.
You cant, c:\windows is locked. If you change anything in that directory, your Windows 7 computer will start, but only to display "Invalid System Software Installed! Please shutdown and return this computer to your ISP's store for assistance."
What we have on Verizon, is a phone with admin rights (rooted), where we can't re-install the software needed to boot a different operating system.
If you're interested in more detail on how the hardware prevents the bootloader from being cracked, and what the attack vectors are, you might be interested in the presentation linked from this post http://forum.xda-developers.com/showthread.php?t=1766638
(And yes I know that c:\windows isn't actually the boot partition on windows. Just trying to make it easier for the OP to understand.)
Click to expand...
Click to collapse
Thanks that really helped. So in the example of Jelly Bean -sounds like we need to wait for Verizon to release a version of it? Do all custom ROMs as well have to be based off of the VZW file that checks ok with the bootloader?
I'm really only concerned with Jelly Bean (knowing how long VZW takes to release stuff) and that wifi nag screen, I want to punch someone in the nose every time i see it...I will check out that presentation over lunch, would love to learn all about the details.
interesting and helpful topic.. however.. i thought i understood the locked bootloader situation on my droid bionic i could flash any rom i wanted to in conjunction with bootstrap wich i believe to be a bootloader by pass based recovery but no kernals were able to be flashed that is what i understood to be a locked b.l was not overclocking or custom kernals maybe i was wrong this whole time..
Bfitz26 said:
interesting and helpful topic.. however.. i thought i understood the locked bootloader situation on my droid bionic i could flash any rom i wanted to in conjunction with bootstrap wich i believe to be a bootloader by pass based recovery but no kernals were able to be flashed that is what i understood to be a locked b.l was not overclocking or custom kernals maybe i was wrong this whole time..
Click to expand...
Click to collapse
Weird this is how i understood it as well. I'm coming from the Droid X2 and thanks do DK we had cm9 up and running with ICS but the bootloader was locked down. I took it that bootstrap is a recovery tool that works in a way of when your phone is off and you plug it in you boot up to the bootloader. This would allow you to re-flash a rom if your current one was corrupt.
So in my mind you can run different roms and different android versions its just harder to get them on the phone. But from what i've seen you cant flash a new kernal if the bootloader is locked.
Maybe i miss understood this if so i really would like to know fully how this works
On the verizon gs3 the locked bootloader is keeping us from flashing a custom kernel thru odin...we can root and flash a custom rom / recovery but it has to utilize the stock kernel currently. Our bootloader debacle is nothing like moto devices and I wish folks would stop comparing the 2!
droidstyle said:
On the verizon gs3 the locked bootloader is keeping us from flashing a custom kernel thru odin...we can root and flash a custom rom / recovery but it has to utilize the stock kernel currently. Our bootloader debacle is nothing like moto devices and I wish folks would stop comparing the 2!
Click to expand...
Click to collapse
Exactly, what a locked bootloader will allow you to do will vary on different phones and firmwares. I've known some which would not even allow you to flash a recovery.
Sent from my SAMSUNG-SGH-I747 using xda premium
I really hope we get the bootloader unlocked would love to see cm on this phone with some of invisblek's great kernels. btw will I be able to even usrge "set cpu" to overclock and under clock with verizon stock kernal or can this be done with tweaks in the build.prop file, forgive me if this sounds stupid its been a while and I am a samsung's odin first time user.
Sadly this is the outcome of Americans NOT buying a device without a subsidy from the carrier.
Kind of like whining about NOT getting the best Porterhouse steak when buying with food stamps......
I would love to see an end to carrier subsidies.
~~~Sent from the 23rd century, thru a Samsung Onehunglow powered by Walmart brand Higgs Boson particles. (Aisle 27)~~~
I am disappointed in samsung they start to look like Apple can not my apps to my sd card write that they have locked that 2
Hey guys, I'm wondering if anyone has done this, or knows if it's possible to (after unlocking bootloader) flash the Google stock Pixel system image instead of the Verizon one? I'm assuming the hardware and firmware are identical, but am not sure and am not skilled enough (or at all) in code to know if its possible. I bought my phone through Verizon, only because nowhere else had stock. I use it on T-Mobile, but fear there may be some behind the scenes Verizon stuff going on that may hinder my phone on T-Mobile. I haven't experienced any issues yet, but with the Nov security update mentioning a specific fix for wifi calling in New Mexico only on the Verizon pixels, it makes me weary that there is more happening beneath the surface than I am aware of. Thanks for any and all help! Appreciate it.
newbienic said:
Hey guys, I'm wondering if anyone has done this, or knows if it's possible to (after unlocking bootloader) flash the Google stock Pixel system image instead of the Verizon one? I'm assuming the hardware and firmware are identical, but am not sure and am not skilled enough (or at all) in code to know if its possible. I bought my phone through Verizon, only because nowhere else had stock. I use it on T-Mobile, but fear there may be some behind the scenes Verizon stuff going on that may hinder my phone on T-Mobile. I haven't experienced any issues yet, but with the Nov security update mentioning a specific fix for wifi calling in New Mexico only on the Verizon pixels, it makes me weary that there is more happening beneath the surface than I am aware of. Thanks for any and all help! Appreciate it.
Click to expand...
Click to collapse
I did yesterday, bought mine from Best Buy and I unlock the BL. Sideload the OTA yesterday and I used NDE63V that comes with new radio. oh I'm also on Tmobile
jay661972 said:
I did yesterday, bought mine from Best Buy and I unlock the BL. Sideload the OTA yesterday and I used NDE63V that comes with new radio. oh I'm also on Tmobile
Click to expand...
Click to collapse
Awesome! Thanks for the info... Really glad to know I can convert if need be. Thanks again!
jay661972 said:
I did yesterday, bought mine from Best Buy and I unlock the BL. Sideload the OTA yesterday and I used NDE63V that comes with new radio. oh I'm also on Tmobile
Click to expand...
Click to collapse
Interesting side note on this...
I went ahead and unlocked my bootloader and flashed Google's stock Pixel image. All went well, no problems... Until I tried to use Android Pay. It's telling me my software can't be verified. And I out of curiosity checked, and the "allow OEM unlocking" in developer options is still greyed out, and not selectable, even though my BL is unlocked. Hoping this doesn't mean that we can't take an OTA. Weird, I guess we'll have to wait and see when next month's security update comes out...
newbienic said:
Interesting side note on this...
I went ahead and unlocked my bootloader and flashed Google's stock Pixel image. All went well, no problems... Until I tried to use Android Pay. It's telling me my software can't be verified. And I out of curiosity checked, and the "allow OEM unlocking" in developer options is still greyed out, and not selectable, even though my BL is unlocked. Hoping this doesn't mean that we can't take an OTA. Weird, I guess we'll have to wait and see when next month's security update comes out...
Click to expand...
Click to collapse
Just having an unlocked bootloader trips SafetyNet now and you can't use Android Pay without a custom kernel.
ITGuy11 said:
Just having an unlocked bootloader trips SafetyNet now and you can't use Android Pay without a custom kernel.
Click to expand...
Click to collapse
And the OEM unlock option appears to be dependent on device ID (imeid? Ccid?), And not the software. So don't relock it, and you're fine
Sent from my Pixel using Tapatalk
danaff37 said:
And the OEM unlock option appears to be dependent on device ID (imeid? Ccid?), And not the software. So don't relock it, and you're fine
Sent from my Pixel using Tapatalk
Click to expand...
Click to collapse
One thing I just realized, is in Developer Options, its greyed out like I mentioned, but also says "Bootloader is already unlocked". Which I actually remember seeing on my Nexus 5x when the bootloader was unlocked. It's got me really curious about re locking the bootloader. Mainly cause I actually use Android Pay. Had no idea bootloader unlocks are actually tripping safety net now. Major bummer. If anyone has gone through this process with a Verizon pixel and has actually relocked their bootloader with no issues I'd certainly appreciate any info you have. Otherwise, I may have to dive in blind and hope for the best.
If you want to use Android pay, flash a custom kernel but don't root. Works for me.
Don't relock if you ever want to have it rooted, custom, etc. The unlock method isn't going to survive another security update.
Sent from my Pixel using Tapatalk
danaff37 said:
If you want to use Android pay, flash a custom kernel but don't root. Works for me.
Don't relock if you ever want to have it rooted, custom, etc. The unlock method isn't going to survive another security update.
Sent from my Pixel using Tapatalk
Click to expand...
Click to collapse
Hypathetically, if I didn't want root or anything custom at all, do you think that relocking the bootloader could cause an issue while using the Stock Google image on a Verizon Pixel? I wish I had more knowledge on this, but I'm pretty in the dark on this stuff as of late... Thanks for your help!
Should be fine if all stock I think, just know that you may not be able to unlock later.
Sent from my Pixel using Tapatalk
newbienic said:
One thing I just realized, is in Developer Options, its greyed out like I mentioned, but also says "Bootloader is already unlocked". Which I actually remember seeing on my Nexus 5x when the bootloader was unlocked. It's got me really curious about re locking the bootloader. Mainly cause I actually use Android Pay. Had no idea bootloader unlocks are actually tripping safety net now. Major bummer. If anyone has gone through this process with a Verizon pixel and has actually relocked their bootloader with no issues I'd certainly appreciate any info you have. Otherwise, I may have to dive in blind and hope for the best.
Click to expand...
Click to collapse
Contrary to what people are saying. You CAN relock your bootloader and then unlock it again later. However, keep in mind that at some point there will likely be an update that blocks the use of dePixel8 and you will no longer be able to unlock the bootloader unless someone writes another exploit.
I would like to find a way to permanently unlock VZW Pixels but until I get one from the Google Store to compare with my Verizon one I don't think I will make much progress.
Relocking your bootloader is as simple as running the "fastboot oem lock" command from the terminal window.
Lastly. If you want to relock the bootloader, make sure your phone is 100% stock image or you risk bricking the phone
If I were to buy the Verizon pixel and flash the unlocked (non European) image. How do you think updates would work? Would I get seamless updates from Google or would I need to flash every Ota manually. Might be too early to tell
b316kane said:
If I were to buy the Verizon pixel and flash the unlocked (non European) image. How do you think updates would work? Would I get seamless updates from Google or would I need to flash every Ota manually. Might be too early to tell
Click to expand...
Click to collapse
This is exactly what I did, and I am curious as well... We'll see next month I guess, but I'm guessing it will take the OTA just fine. My wife has a Pixel from the Google store, and mine is from Verizon. I've compared everything (including booloaders) since flashing the Google store Pixel image, and every informational detail is identical. Not sure if there is some other place hidden to me that might indicate a difference, but I'm thinking that Verizon's Pixel is only different in its official software image... And, that may be it. Please don't take my word for it, I'm no developer, and know very little about any of this, but in my comparisons, they are identical now since flashing Googles official (Non Verizon, Non European) image.
Sidenote, I have yet to try this, but I'm thinking that since I am on Googles image, that if I re-lock my bootloader, that I WILL be able to unlock again after locking. I think Verizon used Googles "Allow OEM Unlocking" software toggle in developer options as the only method to actually keep people from unlocking the bootloader (again speculative), and now that I'm on Googles image, that software "block" should no longer be present, so I should in theory, be free to lock/unlock the same as Pixels purchased from the Google store... Again, I've got no proof, or actual skill to back this up, but it's a theory I have, and if I end up locking my BL again, I'll post what I find...
newbienic said:
I have yet to try this, but I'm thinking that since I am on Googles image, that if I re-lock my bootloader, that I WILL be able to unlock again after locking.
Click to expand...
Click to collapse
In the Verizon unlocking threads the people that tried relocking reported that they were unable to unlock again without depixel8, which is the same as how the Verizon phone typically works. Some people seem to have gotten into situations that could have been corrected with an unlocked bootloader, but because they had a locked bootloader that couldn't be unlocked using depixel8 they had no easy solution to get their phone working again at this time.
http://forum.xda-developers.com/pixel-xl/how-to/psa-read-relocking-bootloader-t3494615
alluringreality said:
In the Verizon unlocking threads the people that tried relocking reported that they were unable to unlock again without depixel8, which is the same as how the Verizon phone typically works. Some people seem to have gotten into situations that could have been corrected with an unlocked bootloader, but because they had a locked bootloader that couldn't be unlocked using depixel8 they had no easy solution to get their phone working again at this time.
http://forum.xda-developers.com/pixel-xl/how-to/psa-read-relocking-bootloader-t3494615
Click to expand...
Click to collapse
Thanks for the heads up!!! Like I said, I really know nothing, just speculating. Appreciate you looking out.
newbienic said:
Thanks for the heads up!!! Like I said, I really know nothing, just speculating. Appreciate you looking out.
Click to expand...
Click to collapse
I forget where, but I saw written or implied that the "checking for updates" screen about third of way through initial setup of first boot uses WiFi AND sim carrier data to install Verizon custom restrictions and settings that among other effects make depixel8 required.
Even on "non Verizon phones" (which you are saying use the same build images byte to byte?)... You have to either use a SIM card or wifi and google account to allow the developer options to enable OEM unlock.
My theory: In other words, if you don't allow via SIM and a network wifi or data connect, for Verizon to mark your phone, or another carrier, then the phone can not be unlocked. So carrier models may indeed be differentiated from current factory images AFTER boot and setup.
There is a post in Q&A of someone trying to unlock bootloader without loading into the device, not having luck. This is why oem unlock toggle is so important and why people are bricking from locked bootloaders that won't unlock (so no wipe and factory images cannot be flashed.)
Another thing to consider: SIM network lock will not be flashed over.
Sent from my sailfish using XDA Labs
Just got a Nokia 3.1 to use a testing tool and other fun stuff, and therefore would like to root it. Does anyone of you know of a working root of the 3.1?
So this phone is a no go for root and custom roms I guess.
kaslopis said:
So this phone is a no go for root and custom roms I guess.
Click to expand...
Click to collapse
Why do you think so? Bootloader can be unlocked via Developer settings, and I think there is no special magic preventing this device from rooting.
I would try rooting it by flashing some SuperSU zips or something like that, but I didn't try it yet
Has anyone checked this out? I haven't purchased a Nokia 3.1 but am considering it. I went so far as to create a Nokia account and there is a bootloader unlock apk, as well as an unlock.key that can be downloaded, and there are clear instructions on the Nokia page itself.. Since I don't have the phone, I did not attempt to proceed. However, if the 3.1 qualifies (I don't see why it wouldn't) then getting root should be as easy as following Magisk instructions.
There is even a page for the open source releases.
If I were to get the 3.1, my main objective would likely be to just obtain root. Looks like it should be doable.
Edit - well over 100 views since I posted this but no one has tried to unlock and/or root. I thought that was the purpose of this thread.
Unfortunately that app always crashes
VidarPT said:
Unfortunately that app always crashes
Click to expand...
Click to collapse
That is unfortunate! Perhaps, does activating Developer Options allow to select OEM Unlocking and USB Debuging, then running the Unlocking App? To run step 5 of 5 (see NOKIA INSTRUCTIONS below) you would need to have USB Debugging enabled anyway. Nowhere in the instructions is that mentioned.
FYI - Activate Developer Options: Go to Settings>About Phone and tap Build Number 7 times. Back out to access Developer Options.
Also, I do not have this phone but am interested in it. I cannot confirm if any of the advice I am giving will work, but it is what I would try.
NOKIA INSTRUCTIONS
Introduction
Firstly, we need to validate that the phone you would like to unlock is operated by you. There are a few steps to this, so we ask that you carefully follow all instructions. Let’s get started.
To participate, simply complete the following steps:
1. Please download the Nokia Bootloader Unlocker app. You can download the apk from this link and install the apk on your device. If you don’t understand how to install an apk on your device, please do not unlock the bootloader on your device. Doing so will void your phone's warranty and may cause irreparable damage.
2. Launch the Nokia Bootloader Unlocker app and fill your email information and click “Submit”.
3. The app will display a code. Please enter this in the form below along with your email address. Then press "Request to Unlock"
Your bootloader can now be unlocked. Follow the instructions below:
Step 1/5
Check the email you entered during registration. You should receive an email with a message as follows:
Hi, Thanks for requesting the unlocking bootloader. Please download your unlock key from the following link. xxxxxxxxxxxxxxxxxxxxxxxxxx
Download the unlock key and save it as “unlock.key”.
Step 2/5
Power off your device. Once powered off, press and hold the Volume Down button.
Step 3/5
While keeping the Volume Down button pressed, connect the device to the computer via USB cable. The device will boot into “Download mode”. If you have difficulty, try powering up normally, power off the device again and start back from Step 1.
Step 4/5
Download the following fastboot binary for your OS here.
Step 5/5
Open a command prompt:
Windows: Start > cmd
Mac: Applications > Utilities > Terminal.app
Linux: Terminal
Navigate to the directory where the previously downloaded unlock.key file is saved. Then enter the following commands:
fastboot flash unlock unlock.key
fastboot oem unlock
If successful, you should see the below message:
Unlock success!
Then reboot the device by entering the following command:
fastboot reboot
You are done!
It doesn't work either way. I tried with both those options enabled and disabled but the program always crashes. It's interesting to note that the app itself fails to install through chrome or "Files" app. Gives an error saying "Can't open app". I only managed to install it through ES File Explorer. Could it be because of I bought the phone on a Vodafone store? I can't find the original stock rom to flash, sadly.
VidarPT said:
It doesn't work either way. I tried with both those options enabled and disabled but the program always crashes. It's interesting to note that the app itself fails to install through chrome or "Files" app. Gives an error saying "Can't open app". I only managed to install it through ES File Explorer. Could it be because of I bought the phone on a Vodafone store? I can't find the original stock rom to flash, sadly.
Click to expand...
Click to collapse
I have been researching this and have found that, as of this writing, only the Nokia 8 qualifies for bootloader unlocking. See here. The only thing holding me back from jumping on this Nokia 3.1 is the inability to unlock the bootloader (and maybe the lack of fingerprint sensor.) Hopefully it gets "approved soon".
Currently the oem unlock using the Nokia bootloader unlock only works for Nokia 8
is there a way to root the 3.1 yet successfully? im a noob at this stuff and don't want to screw my phone.
snarfydog said:
is there a way to root the 3.1 yet successfully? im a noob at this stuff and don't want to screw my phone.
Click to expand...
Click to collapse
No, not until Nokia decides to allow users to unlock bootloader.
What about the 3.1 plus. I've already unlocked OEM. I just started looking, thought I'd start here first.
XSHADOW3 said:
What about the 3.1 plus. I've already unlocked OEM. I just started looking, thought I'd start here first.
Click to expand...
Click to collapse
It doesn't matter if you have enabled "OEM unlocking" option in Developer settings, currently Nokia doesn't allow unlocking of bootloader and thus rooting device, unless you are Nokia 8 user. You can try this, but it will crash almost for sure.
As far as I can tell, my bootloader is unlocked. I am a noob of course, but I have been researching this topic for a couple of months now. I could be mistaken in thinking "upload" mode is it, but I can't seem to figure out the difference. Otherwise, I don't know what to do next.
Nightseer said:
As far as I can tell, my bootloader is unlocked. I am a noob of course, but I have been researching this topic for a couple of months now. I could be mistaken in thinking "upload" mode is it, but I can't seem to figure out the difference. Otherwise, I don't know what to do next.
Click to expand...
Click to collapse
Can you please tell what did you do exactly?
MilesSeventh said:
Can you please tell what did you do exactly?
Click to expand...
Click to collapse
To get to "Upload" mode? Assuming it's the same for the 3.1 Plus-maybe I should have specified that-holding power button and volume up during startup will open "Upload" mode.
You can also use adb with the command "reboot bootloader." For that reason, I think it's the bootloader, but I could be wrong.
Sorry if I was a bit misleading and it is totally different on the Nokia 3.1, I was just some kinda hopeful to actually see people talk about it.
Let's get her done
Nightseer said:
To get to "Upload" mode? Assuming it's the same for the 3.1 Plus-maybe I should have specified that-holding power button and volume up during startup will open "Upload" mode.
You can also use adb with the command "reboot bootloader." For that reason, I think it's the bootloader, but I could be wrong.
Sorry if I was a bit misleading and it is totally different on the Nokia 3.1, I was just some kinda hopeful to actually see people talk about it.
Click to expand...
Click to collapse
I'm not bringing any sizable programming skills to the table unless somebody wants to teach me real fast.
Hopefully, I bring tidings of great joy. So I got two these Nokia's and they're both locked. to the carrier, Cricket. I suspect they are at least unlawfully locked. . My understanding is you can't lock to used phone especially if it's been sold as a prepaid phone. I believe this falls under the reseller flex policy. I bought it off of eBay from a guy that sells nothing but phones and he's been extremely cagey about what he'll admit to, so I called the carrier. I literally waited an hour and a half on the phone because I am falling asleep and I was on a computer speaker phone so it kept on the time of the call. I only held that long because I had fallen asleep. Anyway since I'm not in a cricket or AT&T customer then don't plan to eitherbe they could care less about me it actually told me they didn't have any information on the phone after I gave them the IMEI number.
My guess is the fcc's not going to do much because it's a trump Administration. So I spent about 45 minutes on the phone with Nokia and well at least they're interesting I think Microsoft paid between 7 and 12 billion to acquire them I recently sold them off for like a box of jujyfruits. Anyway they're committed to customer service so I figure my predicament might give me an in there.
So those unlock codes that it was a link earlier in the post for that's just to unlock the bootloader, right? You know this is a pretty decent phone for a low-end guy I got the newer 3.1 C it's got Cricket's bootloader in bloatware on it,
takes up a ton of space.
I mean it probably won't happen but if Nokia ever goes public again - I think the acquiring companies. Their eye on the prize and they're going to kick some ass. So I'm all in on this let's get this done. If you want I can see what I can do about asking Nokia 4 whatever it's going to take just to keep me a satisfied customer since they know Cricket/ATT isn't following the Obama regs.
Oof... It would be beautiful if Nokia customer support could guide us onto rooting this phone.
its so simple to unlock oem on nokia 3.1 plus. no third app needed. after developer option on -> go to developer option setting -> there is toggle button to on/off developer option , just use that toggle to off it and on it -> press yes for on dev options -> and select oem unlock. that all
It is pretty straightforward once you have unlocked bootloader (not by Nokia). If you want, you can simply dump boot_a or boot_b with SPflash tool, patch in Magisk app, and reflash.
Otherwise you can use my TWRP (NO TOUCH, and has disabled dm-verity). Please note it's only working on build v3.180, updates not supported - as it was only needed for my project.
https://forum.xda-developers.com/no...m-kali-nethunter-nokia-3-1-android-9-t4157681
Hello Guys,
long i searched for a method of unlocking the bootloader of eml-l29 Huawei P20. No i didnt find any, and qu1ckr00t didnt prove to be useful either.
it is not relevant anymore. since i did use testpoint too often in research of what is possible and what not, the device died just a few minutes ago. it always enters now only the usb huawei com mode. probably i used to much pressure on the testpoints or what or i accidentally short circuited other points with the screwdrivers.. but as a matter of fact, it is hardware bricked and the board is done for i think. so i dont search for a solution anymore.
people, see this thread as a resource what is possible without unlocking the bootloader and what not. i figured out following things are fact without unlocking the bootloader, so that you all doesn't have to try instead of me:
- you can flash with the testpoint short circuited and the software dc-phoenix and the right chipset/cpu bootloader chosen in temporary bootloader the twrp to erecovery_ramdisk and recovery_ramdisk, it will be permanently available after the process
- you cannot install magisk on it, since xloader seems to block the bootup and always sends you to recovery-mode (which means twrp if you flashed this)
- you cannot install a custom rom like OpenKirin with the testpoint recovery mode, as it - like with magisk, always will send you to recovery mode - i tried it exactly how it is explained on openkirin.net and it always turned out the same
- there is no bootloader unlock code in the nvme partition, i checked it - it seems there is encryption going on there
- the exploit qu1ckr00t is not usable, since the kernel is compiled with spinlock_debug
- and i forgot first: if you have the idea of soldering a cable for testpoint short circuit - no, letit be. you will only hang forever in huawei usb com 1.0 mode - it wont boot normally as long as you're in tp mode
so basically, there is way to get root, it is a way to get to direct data from the partitions. but at the end, the question that arises is - how much profit are you gaining from root or custom roms on this device at the end? in my case, the many tries costed my time, my nerves and now the device itself. it is gone for good. maybe this is for the best, as i never treated it right since i bought it (it had to be repaired two times in 2 years, which is a lot for a normal device at this amount of time) and i only have bad memories in my life with it (lots of things happened, but this is not the right place for such tellings).
my final message for this part of this board (not the board i damaged thou) - leave it alone, don't waste your time anymore on this. move on, there are cheap devices that are better, faster and unlockable too at this day and time. i moved on to my new Nokia 7.2, which is awesome.
so stay healthy guyz.
my journey of exploring the depths of huaweis device huawei p20 eml-l29 ends here. its sad, but at the same time i'm happy that the "horror" of an unlockable bootloader is finally over.
Thanks for your effort and sharing the info. Good luck with new phone
Note: my next phone won't be Huawei, for sure, due to bootloader locking, I am fed up with them
Yes,
I even have no sorry with them if they go down because of the Google lockout. Their strategy is to pull people away from Google PlayStore? Yes, sure. Good luck.
Unlock bootloader and promise to keep it open for P10 upwards and we are happy. Otherwise... byebye and fcku.
FearFac said:
Thanks for your effort and sharing the info. Good luck with new phone
Note: my next phone won't be Huawei, for sure, due to bootloader locking, I am fed up with them
Click to expand...
Click to collapse
What if I have my unlock code? Can I still unlock it or it's impossible now? I requested my code before they stop the bootloader unlocking, but never did anything with it.
ElChe said:
What if I have my unlock code? Can I still unlock it or it's impossible now? I requested my code before they stop the bootloader unlocking, but never did anything with it.
Click to expand...
Click to collapse
You are the lucky one who can root your phone.
FearFac said:
You are the lucky one who can root your phone.
Click to expand...
Click to collapse
Yeah I guess haha. I haven't got around doing it yet. But now I know it's a possibility! So I'll eventually do it!
FearFac said:
You are the lucky one who can root your phone.
Click to expand...
Click to collapse
How do you root it? AFAIK anything newer than EMUI8 is no longer rootable.
I'm on EMUI 10, with an unlocked bootloader, please tell me how to root.
zgomot said:
How do you root it? AFAIK anything newer than EMUI8 is no longer rootable.
I'm on EMUI 10, with an unlocked bootloader, please tell me how to root.
Click to expand...
Click to collapse
I do a query you have emui 10 with bootloader open?how did you do it ?it was not the problem that emui 10 closed the bootloader?can't root with magisk?
zgomot said:
How do you root it? AFAIK anything newer than EMUI8 is no longer rootable.
I'm on EMUI 10, with an unlocked bootloader, please tell me how to root.
Click to expand...
Click to collapse
Where did you get this info from?
I was just thinking of rooting my CLT L09 Emui 9.1.0
So you got the Edge S and want GApps? Basically you unlock your bootloader, root with Magisk, then install MagiskGApps.
DISCLAIMER: UNLOCKING YOUR BOOTLOADER MAY VOID YOUR WARRANTY, AND DOING ALL THESE THINGS IN THIS GUIDE MAY RESULT IN DAMAGE/BRICKING YOUR PHONE. I AM NOT RESPONSIBLE FOR ANYTHING YOU DO TO YOUR PHONE. PROCEED AT YOUR OWN RISK.
1. Unlock the bootloader: that should be doable with their global bootloader unlock website here.
2. Download Lenovo Motoroa Smart Assistant (Rescue and Smart Assistant), and follow its instructions to "rescue" your device. It will lead you to boot into bootloader mode and download the firmware. Find the firmware file via the LMSA's downloads (should have a "show folder" button). You'll need the boot.img file for Magisk.
3. Download Magisk, then follow its instructions. You'll have to copy the boot.img to your device, then use Magisk to patch the boot file, then copy the modified one to your PC.
4. You'll need fastboot. If you don't have it already, you can download the Android SDK platform tools here. Then go into the folder, Shift+Right Click the folder, then "Open Command Prompt" or "Open PowerShell," you should have something close to one of those two. Copy your Magisk modified .img file to that folder, then you'll want to input:
fastboot flash boot [modified .img file]
Once that completes, you should see in large text, "Start" on your phone next to the power button. Press the power button, and it should boot, and you should have root now.
5. Download MagiskGApps to your phone, open Magisk on your phone, click the button that looks like a puzzle piece at the bottom of the screen, "Modules." Click "Install from storage," locate the MagiskGApps file, and install it. After that it will ask you to restart your phone, do that, then you'll just have to be patient as it takes time once its restarted to load everything. You also may need to update some or all of the apps, then you should be able to use the notification to finish setting up the phone with Google Setup.
Thanks to Motorola for making it easy to unlock their bootloaders
Thanks to the whole Magisk team for making an easy, awesome root (and more!)
Thanks to Wacko1805 (and team?) for making MagiskGApps. This is really awesome.
unlock the BL and get root is will make some apps fingerprint and face ID fail?
kimker said:
unlock the BL and get root is will make some apps fingerprint and face ID fail?
Click to expand...
Click to collapse
Magisk has a "Magisk Hide" which will allow it to pass SafetyNet, and most things which check on device security will think the device is secure. But unlocking BL and rooting does make the device less secure, and therefore incurs its own risks apart from bricking or damaging the device.
HopelesRomantc91 said:
Magisk has a "Magisk Hide" which will allow it to pass SafetyNet, and most things which check on device security will think the device is secure. But unlocking BL and rooting does make the device less secure, and therefore incurs its own risks apart from bricking or damaging the device.
Click to expand...
Click to collapse
yes, i knew the unlock and root will take risk.. but not sure is Payment business apps using fingerprint will work normal.
kimker said:
yes, i knew the unlock and root will take risk.. but not sure is Payment business apps using fingerprint will work normal.
Click to expand...
Click to collapse
Google Pay works. But according to the Motorola website you should be able to relock the bootloader if yours doesn't work. But there's never any guarantee. If you need your device secure, recommend don't unlock bl or root, or wait to see if there's a root option without bootloader unlock that can be easily undone.
HopelesRomantc91 said:
Google Pay works. But according to the Motorola website you should be able to relock the bootloader if yours doesn't work. But there's never any guarantee. If you need your device secure, recommend don't unlock bl or root, or wait to see if there's a root option without bootloader unlock that can be easily undone.
Click to expand...
Click to collapse
I saw that someone’s edge s had unlocked the BL and Flash G100 firmware and everything worked normally, and then tried to lock the BL again, but it was unsuccessful and the system could not start. The flashing tool does not recognize the machine.
kimker said:
I saw that someone’s edge s had unlocked the BL and Flash G100 firmware and everything worked normally, and then tried to lock the BL again, but it was unsuccessful and the system could not start. The flashing tool does not recognize the machine.
Click to expand...
Click to collapse
That's not good. Hopefully they can restore it back somehow. With this guide to unlock and flash gapps why would you need to flash G100 though? This seems to be itright now without one of rom developer's releases to get root & apps. For me this is all i would look for. Titanium backup on it and restore.. done until PE rom comes out.
kimker said:
I saw that someone’s edge s had unlocked the BL and Flash G100 firmware and everything worked normally, and then tried to lock the BL again, but it was unsuccessful and the system could not start. The flashing tool does not recognize the machine.
Click to expand...
Click to collapse
I would think yes, if you flash different firmware, locking the BL would likely cause problems. It's very difficult to do anything w/o unlocked bootloader, except sometimes rooting is doable. That's pretty much the behavior I expect. If they come to this subforum, we might be able to help.
HopelesRomantc91 said:
I would think yes, if you flash different firmware, locking the BL would likely cause problems. It's very difficult to do anything w/o unlocked bootloader, except sometimes rooting is doable. That's pretty much the behavior I expect. If they come to this subforum, we might be able to help.
Click to expand...
Click to collapse
thank you. They did not ask for help. It seems that the lock BL is a self-verification switch, and then performs a verification system integrity.
HopelesRomantc91 said:
I would think yes, if you flash different firmware, locking the BL would likely cause problems. It's very difficult to do anything w/o unlocked bootloader, except sometimes rooting is doable. That's pretty much the behavior I expect. If they come to this subforum, we might be able to help.
Click to expand...
Click to collapse
I'm curious,If you unlock and flash other firmware and then flash back to the original firmware, can it be locked again?
Mine doesn't let me unlock its BL. I've got unlock code from moto and did a factory reset with SIM card in slot 1. After enabling developer mode and debugging the switch still is greyed out. So no chance to unlock it.
Has anyone got an idea what to try now?
Moto support answered yesterday to my request but also no solution since I told them that it doesn't work
Device is not branded. I got it from Amazon so no provider branding.
If this won't be able to be unlocked and rooted I'll have to return it and switch to a Google Pixel.
kischde said:
Mine doesn't let me unlock its BL. I've got unlock code from moto and did a factory reset with SIM card in slot 1. After enabling developer mode and debugging the switch still is greyed out. So no chance to unlock it.
Has anyone got an idea what to try now?
Moto support answered yesterday to my request but also no solution since I told them that it doesn't work
Device is not branded. I got it from Amazon so no provider branding.
If this won't be able to be unlocked and rooted I'll have to return it and switch to a Google Pixel.
Click to expand...
Click to collapse
I had the same issue, you need to factory reset WITH your sim card in the phone, this will let you open the OEM unlock slide thing in the dev mode.
Then once its done you can fastboot and unlock the bootloader.
I did so, maybe I explained not so well. SIM was inserted and then I did factory reset by starting it from settings. After restart it's still the same - switch / unlock slider greyed out.
kischde said:
I did so, maybe I explained not so well. SIM was inserted and then I did factory reset by starting it from settings. After restart it's still the same - switch / unlock slider greyed out.
Click to expand...
Click to collapse
On my OG Pixel XL, I had to wait 7 days for the slider to become normal. By the time I got around to do it on the Edge S it was about the same time.... could be related
Now as you said that I remember that thingy with another device. Maybe a Xiaomi I think... With that I had to wait several days until the unlock code was delivered.
But there was a message, too, when trying to get it sooner, which said you needed to wait some more time.
Not sure if it's the the same for Moto devices? Then again, when thinking that you experienced the same with a Pixel, too...
Did anyone else make such an experience with his/her g100?
kischde said:
Now as you said that I remember that thingy with another device. Maybe a Xiaomi I think... With that I had to wait several days until the unlock code was delivered.
But there was a message, too, when trying to get it sooner, which said you needed to wait some more time.
Not sure if it's the the same for Moto devices? Then again, when thinking that you experienced the same with a Pixel, too...
Did anyone else make such an experience with his/her g100?
Click to expand...
Click to collapse
Make sure your on the latest OTA, Lenovo made a mistake on previous versions with the OEM Unlocking function not being enabled. They fixed it in latest ota.
RSA tool said the file I uploaded yesterday is the latest one available (and it's exactly the same as the installed version).
The device was released just a few days ago in Europe. Perhaps they fixed the unlock switch in other regions and still need to fix it in Europe..
Will wait until weekend if they come up with a solution. If not I'm afraid I have to return the device as I need it personally AND professionally, too - I'm field agent, so.... :/
HopelesRomantc91 said:
I would think yes, if you flash different firmware, locking the BL would likely cause problems. It's very difficult to do anything w/o unlocked bootloader, except sometimes rooting is doable. That's pretty much the behavior I expect. If they come to this subforum, we might be able to help.
Click to expand...
Click to collapse
The poor guy whose phone turned bricks went to the after-sales department of moto, and the answer was that he needed to replace the phone motherboard. .
kimker said:
The poor guy whose phone turned bricks went to the after-sales department of moto, and the answer was that he needed to replace the phone motherboard. .
Click to expand...
Click to collapse
Ouch...
kimker said:
I'm curious,If you unlock and flash other firmware and then flash back to the original firmware, can it be locked again?
Click to expand...
Click to collapse
I would assume so, but I don't really know why anyone would want to relock.