Related
hi, yesterday a new firmware came out for this box, unfortunately I can't update, I installed the drivers and on the device manager it sees it, but with phonesuite it tells me device not found, please help me how to update it, thank you very much
This is error
errore transpeed — Postimages
postimg.cc
Help
Transpeed 6k-616
If you want custom rom with root and update 2020.10.21 the room fully working its better then stock some memory optimization was done .
Flash with PhoenixSuit_V1.10
First change language from russian to english and then connect to the internet run magisk tv box will reboot
Creators of the room bosia_angel and VPS56:
Download here
maxking said:
hi, yesterday a new firmware came out for this box, unfortunately I can't update, I installed the drivers and on the device manager it sees it, but with phonesuite it tells me device not found, please help me how to update it, thank you very much
This is error
errore transpeed — Postimages
postimg.cc
Help
Click to expand...
Click to collapse
Download these tools Link and try too flash it with PhoenixSuit_V1.10
quatrixone said:
Transpeed 6k-616
If you want custom rom with root and update 2020.10.21 the room fully working its better then stock some memory optimization was done .
Flash with PhoenixSuit_V1.10
First change language from russian to english and then connect to the internet run magisk tv box will reboot
Creators of the room bosia_angel and VPS56:
Download here
Click to expand...
Click to collapse
Hello, The multitask works?
I hate the minimize and close.
Thank You.
maxking said:
hi, yesterday a new firmware came out for this box, unfortunately I can't update, I installed the drivers and on the device manager it sees it, but with phonesuite it tells me device not found, please help me how to update it, thank you very much
This is error
errore transpeed — Postimages
postimg.cc
Help
Click to expand...
Click to collapse
Hello, Where I can find it?, Thanks a lot.
Hey guys
I have transpeed 6k and when i start it its saying boot for 2 - 3 minutes and after that it showing the clock. Nothing appears on the tv... What should I do?
Tnx a lot
Kolice said:
Ei pessoal
Eu tenho transpeed 6k e quando eu inicio está dizendo boot por 2 - 3 minutos e depois disso ele mostra o relógio. Não aparece nada na tv... O que devo fazer?
Tnx muito
Click to expand...
Click to collapse
estou com esse problema você resolveu o seu? Se sim me vala como proceder pro favor
maxking said:
hi, yesterday a new firmware came out for this box, unfortunately I can't update, I installed the drivers and on the device manager it sees it, but with phonesuite it tells me device not found, please help me how to update it, thank you very much
This is error
errore transpeed — Postimages
postimg.cc
Help
Click to expand...
Click to collapse
I am having same issue. The box will show red light and is not recognised by PhoenixSuit. Device not found. Appears as if reset button in AV port refuses to work. Did you had similar issues?
Hi guys,
I bought an Ex-demo phone last week and it is working fine like a normal phone, the Oppo Code has been entered and the Display mode has been disabled but there are some display features are still within the phone, such as it will only let you set up a pin code like 12345! & Ad starts running if i keep the phone idle for few minutes.
Can someone help me remove or flash it with stock rom to change it to normal version?!
You need to go to service center
Had it too, paid a remote flash service 50eur and it's now a fully functional normal phone.
Mitar00 said:
Had it too, paid a remote flash service 50eur and it's now a fully functional normal phone.
Click to expand...
Click to collapse
Hi, Did you do it online? If so, can you please share the link
It costs 50 to 80$, I don't know if it's still avaliable. The person connects to your computer, downloads the files and flashes the phone with msmdownloadtools with his login credentials.
How about demo removal progress?
After update to Android 12 and reset device to factory condition try this method
100% work!!!!
vickythebosss said:
Hi guys,
I bought an Ex-demo phone last week and it is working fine like a normal phone, the Oppo Code has been entered and the Display mode has been disabled but there are some display features are still within the phone, such as it will only let you set up a pin code like 12345! & Ad starts running if i keep the phone idle for few minutes.
Can someone help me remove or flash it with stock rom to change it to normal version?!
Click to expand...
Click to collapse
Hi,
I know this is very late however I just encountered the same issue and fixed it.
Here are the steps I used:
Reset the device for use with factory reset APK (though it sounds like you have already done this) Here is the tool I used: https://www.martview-forum.com/threads/oppo-all-model-demo-live-remove-gift-for-all-oppo-user.2519/
After phone has been setup, install a custom launcher. I used Hyperion Launcher, however any launcher should work.
Uninstall the demo app on the phone with the custom launcher. The stock oppo launcher won't allow you to do this, but a custom launcher will.
Install the factory reset APK again and factory reset the phone once more.
Setup the phone and enjoy the phone!
NOTE: between steps 3 and 4, it should be noted that I updated my X2 pro to android 12. This shouldn't make a difference however I have no way to know.
Hope this helps!
Bonjour , c’est pour un oppo find x2 néo. Je ne peux pas désinstaller l’application de démo étant donné que je n’a pas accès au menu désinstallation qui est grisé.
Vous pouvez m’aider SVP
Merci d’avance
Mod translation:
Hello, this is for an oppo find x2 neo. I cannot uninstall the demo application since I do not have access to the uninstallation menu which is greyed out.
Can you help me please
Thanks in advance
Youenn29 said:
Bonjour , c’est pour un oppo find x2 néo. Je ne peux pas désinstaller l’application de démo étant donné que je n’a pas accès au menu désinstallation qui est grisé.
Vous pouvez m’aider SVP
Merci d’avance
Mod translation:
Hello, this is for an oppo find x2 neo. I cannot uninstall the demo application since I do not have access to the uninstallation menu which is greyed out.
Can you help me please
Thanks in advance
Click to expand...
Click to collapse
use adb shell
I have a POCO X3 PRO cell phone and I noticed that the whatsapp and telegram folder do not appear in any file manager, how do I find them ???
Thank you for your cooperation...
is under data iirc
and u need file permission if u not using stock explorer
ALPQ46 said:
I have a POCO X3 PRO cell phone and I noticed that the whatsapp and telegram folder do not appear in any file manager, how do I find them ???
Thank you for your cooperation...
Click to expand...
Click to collapse
I dont know about Telegram for I am not using this app. For WA you can find all the backup/ database/media under "Internal Memory/Android/Media/Com.Whatsapp/Whatsapp", the location is quite different from all other android phones I used. Hope this helps.
Have a nice day!
SLo
Ok e obrigado pela ajuda !!!!
I was making a video on tiktok and when I was recording the news was heard and after I finished recording the video is no longer heard, I said to do a restart. When I restart it, only the POCO logo lights up (it turns on and off continuously), I did a reset, it started, but the sound was not heard. I restarted it and again the same story was touched and the logo was lit. I mention that it had root and I had modules installed from magisk, I had audio enhancement modules installed, a microphone and suddenly it didn't work. I tried to put the official camera through Mifkash and the same story, I fixed the phones and they couldn't do anything . What is the problem? And how can I solve it? Help me please
Faceam un videoclip pe tiktok si cand inregistram s-a auzit stirea si dupa ce am terminat de inregistrat videoclipul nu se mai aude, am zis sa facem un restart. Cand il repornesc se aprinde doar sigla POCO (se aprinde si se stinge continuu) am facut un reset, a pornit, dar nu s-a auzit sunetul. L-am repornit și din nou aceeași poveste a fost atinsă și logo-ul a fost aprins. Mentionez ca avea root si aveam module instalate de la magisk, aveam instalate module audio enhancement, un microfon si dintr-o data nu a mers. Am incercat sa pun camera oficiala prin Mifkash si aceeasi poveste, am reparat telefoanele si nici nu au putut face nimic . Care e problema? Si cum o pot rezolva? Ajutati-ma va rog
I could help if you could explain in English
AmmarHaseeb said:
I could help if you could explain in English
Click to expand...
Click to collapse
I was making a video on tiktok and when I was recording the news was heard and after I finished recording the video it was no longer heard, I said let's do a restart. When I restart it, only the POCO logo lights up (it turns on and off continuously) I did a reset, it started, but the sound was not heard. I restarted it and again the same story was touched and the logo was lit.
Lupulexx said:
I was making a video on tiktok and when I was recording the news was heard and after I finished recording the video it was no longer heard, I said let's do a restart. When I restart it, only the POCO logo lights up (it turns on and off continuously) I did a reset, it started, but the sound was not heard. I restarted it and again the same story was touched and the logo was lit.
Click to expand...
Click to collapse
I'm sorry I am not able to understand the whole thing but you seem to be describing a PMIC bug? if not, can you try providing more details? (e.g ROM version, etc)
That is confusing. All I could get from google translation is you installed an magisk sound module and after that your sound stop working properly. If that what it is then try installing this
GitHub - Zackptg5/Audio-Modification-Library
Contribute to Zackptg5/Audio-Modification-Library development by creating an account on GitHub.
github.com
Hello friends,
does anyone have the mcu MTCE_HT_3.60_1 and can provide it to me?
Thanks,
Thomas
Hi Thomas,
I was searching for that version too an contacted Vanku. They sent me mcu version MTCE_HT_3.73_1. If you're interested in this one, just contact me via PM because I'm newly registered here.
Dietrich
Hi Jan61,
can you please send me the MTCE_HT_3.73_1
I has Contacted VANKU, but they don't send me any files. My Bluetooth doesn't work, and I think there is a driver problem. They tell me I should choose the BARROT-i1107e driver. But this one is not in the list. And I couldn't make a factory reset.
I would be very happy if you could help me. Thanks and best regards,
Chris
I have sent you a mail ...
Jan61 said:
Hi Thomas,
I was searching for that version too an contacted Vanku. They sent me mcu version MTCE_HT_3.73_1. If you're interested in this one, just contact me via PM because I'm newly registered here.
Dietrich
Click to expand...
Click to collapse
Hiya. Would you be able to send me a copy of this as well please? My device is stuck on HT_V3.53_1 and keeps crashing. Unknown if update might resolve.
You got mail...
Hola, estoy tratando de reparar mi equipo Vanku pero la marca no contesta mis correos. ¿Podría enviarme o compartir el archivo MTCE_HT_3.73_1? Muchas gracias.
I also had to mail Vanku several times before they answered..
Now for everyone here it is.
My unit is Vanku head unit AA0602B-01, PX6, 4/64, Android 10, 7"/1024x600. If you have different specs don't blame me if it fails...
Hello Jan61, I'll try it. Thank you so much.
Sorry Jan61 for bothering you a bit more, I've tried to install the update but I haven't been able to. Could you tell me how you did it? Thank you so much
Pintxolari said:
Sorry Jan61 for bothering you a bit more, I've tried to install the update but I haven't been able to. Could you tell me how you did it? Thank you so much
Click to expand...
Click to collapse
I think the update doesn't work because it has the wrong name, try renaming it to dmcu.img.
Yes, you're right. The name is just for identifying the right version. For updating system lokks for "dmcu.img", so just cut the rest...
Muchas gracias Pavel-71 por tu ayuda, yo también lo he probado pero tampoco puedo hacerlo. Seguiré intentando.
Good morning, in the end, as you told me, changing the name I have managed to update the team.
I wanted to update it because the equipment had stopped working and although I have updated it, the problem has not been resolved. Everything related to the radio has stopped working and does not search for stations or play. The DAB+ doesn't work either. I don't know why, but I'll keep looking.
Thank you very much for your help.
Pintxolari said:
Good morning, in the end, as you told me, changing the name I have managed to update the team.
I wanted to update it because the equipment had stopped working and although I have updated it, the problem has not been resolved. Everything related to the radio has stopped working and does not search for stations or play. The DAB+ doesn't work either. I don't know why, but I'll keep looking.
Thank you very much for your help.
Click to expand...
Click to collapse
You can also try: In factory settings/126/Radio, check if you have set the correct region. Another sensitivity setting during automatic search is in the tab Other/ Auto search stop - DX - default: 20 db, try another value. If the problem is in the firmware, you can easily find out by installing NavRadia+, basic is enough for testing. Or it could be a bad radio chip, then just replace it. If you have FM and DAB+ on the same antenna, the antenna may be bad. The easiest way is to test it on another car radio or in another car.
NavRadio – Aplikace pro Android na Google Play
Vychutnejte si miliony nejnovějších aplikací pro Android, her, hudby, filmů, televizních pořadů, knih, časopisů a dalšího obsahu. Kdykoli, kdekoli a v jakémkoli zařízení.
play.google.com
Good morning and thank you very much Pavel-71. I will try what you suggest. If I can solve it I will tell you. All the best.