So, i have this problem where i flash my s10 with the stock firmware cause i don't want any bloatware neither the T Mobile startup screen, it is a SM-G973U carrier unlocked, but when i flash it with odin it says pass but when my phone restarts says "Erasing" and then it starts like nothing happened, T Mobile still there, any solutions?
Related
I tried to root my S7 edge US and odin said everything was all right and then it booted up went to the samsung logo and the screen went black then it went to the samsung logo again and it keeps doing this i tried to redo the root same thing i cleared the cache I even factory reset it nothing. My phone was running nougat that might have caused issues and my carrier is AT&T. Please Help!
Update:
The screen is now blue with a caution sign in the middle and it says "An error has occurred while updating device software. Use the emergency recovery function in the Smart Switch PC software." I then tried to use Samsung Kies to do a firmware upgrade and it wont accept my IMEI number.
So im trying to fix a freinds phone. He said it randomly shut off and started bootlooping on the samsung screen. So I flashed the same firmware using odin. It succeded restarted and still does the same exact thing?
No matter what I do I cannot get this damn phone to boot up. After holding vol down and power to soft reset it goes to a screen with a triangle and says installing update then to no command. If i soft reset then hold vol down and home with power download mode will come up. I cant get this phone to go into recovery the combination just brings me to the triangle screen. Maintenance mode wont even come up the triangle screen shows instead. I have knowledge of odin and flashing. Ive been flashing since the motorola cliq lol But this is making me scratch my head...Any ideas?
I want to add that when it freezes at the samsung logo the logo corrupts and gets black lines through it then restarts several seconds after?
Are you flashing all 4 firmware files with Odin or just AP?
Of course I am. I even went ahead and flashed another "non carrier" firmware to see if it made a difference and no luck.
BL
AP
CP
Home_CSC, I flashed the CSC when flashing a different firmware.
By the books and nothing seems to get this phone booting.
Have you tried just normal CSC? Home_CSC keeps data, it's basically acts as an in place upgrade rather than a fresh image.
If you're having issues you'll want a full clean wipe which means using CSC.
When trying a new firmware I flashed the "CSC" because it contains the pit file. So yes I have and that didn't work either.
The phone gets to download mode which tells me its not a brick. Still says "samsung official". FRP lock is off.
And just waiting it out doesn't work? Flashing from a custom Nougat ROM to stock Oreo was like 10+ minutes on the Samsung logo for me.
No as I said in op it always freezes at the Samsung logo over and over and over again.
My best guess is the system partition is corrupt and is un-repairable or the hardware was defect from the factory...but the phone has been In use for 2 years flawlessly...besides that it still boots up Odin(download) mode....so... Does anyone have any idea wtf is going on with this phone? Because anything I do just won't boot it normally. I can't root it and try a custom rom because "OEM unlock" isn't enabled. So WTF?
Please does anyone have any idea what is going on here?
I had some luck with getting it to the bootloader by using odin to flash the corresponding BL file. Then I flashed a combination file obtained from hardreset. But I am still stuck bypassing the FRP lock myself. Either I flash stock rom or firmware with ADB. It always get an error cllose to the end. Or the flash finished and the warning message is still there and I couldn't get pass the google authorisation stage.
Hi guys, I was updating my phone and when the update ended it just kept starting and restarting all the time.
When the samsung logo appears it just restarts again and again.
The phone is not rooted but the bootloader is unlocked.
I wanna flash the latest firmware with odin, do you think is it a good idea or should i try something else?
I think here you can find the solution: https://forum.xda-developers.com/galaxy-s10e/help/s10e-literally-stuck-bootloops-2020-t4032023/page2
Hi,
Yesterday my A51 SM-A515F stopped working. Since then I can't boot the phone anymore. It doesn't go beyond the first samsung screen. I think I tried everything (remove cache, factory reset, odin flash firmware). But it is all unsuccesfull so far. The strange thing is that Odin says that the flash went well, but then the phone starts shows 1-100% samsung loading bar and still doesnt go beyond the samsung boot logo screen.
Is there anyone who had a similar problem or maybe knows how to help me?
Many thanks in advance
lasdebeer said:
Hi,
Yesterday my A51 SM-A515F stopped working. Since then I can't boot the phone anymore. It doesn't go beyond the first samsung screen. I think I tried everything (remove cache, factory reset, odin flash firmware). But it is all unsuccesfull so far. The strange thing is that Odin says that the flash went well, but then the phone starts shows 1-100% samsung loading bar and still doesnt go beyond the samsung boot logo screen.
Is there anyone who had a similar problem or maybe knows how to help me?
Many thanks in advance
Click to expand...
Click to collapse
It happens due to a bad display, Visit service centre they will replace it under warranty.
I have the same problem, I have already installed the firmware with Odin, it starts the screen and it stays stuck on the Samsung logo, when entering the Download mode in Knox Guard it says prenormal, any sugesstions?
Hi, so my Samsung S6 Edge (Sc-04G Japan) had a bootloop, i tried fixing it through odin. It already said it passed, yet it still got stuck again. I also tried the factory reset after, still nothing happens. It still got stuck on phone model, then android logo and then the system recovery, nothing happens. What did i do wŕong? Im positive i got the firmware right